diff options
58 files changed, 519 insertions, 322 deletions
diff --git a/Documentation/filesystems/xfs.txt b/Documentation/filesystems/xfs.txt index 3e4b3dd1e04..83577f0232a 100644 --- a/Documentation/filesystems/xfs.txt +++ b/Documentation/filesystems/xfs.txt @@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted. removing extended attributes) the on-disk superblock feature bit field will be updated to reflect this format being in use. + CRC enabled filesystems always use the attr2 format, and so + will reject the noattr2 mount option if it is set. + barrier Enables the use of block layer write barriers for writes into the journal and unwritten extent conversion. This allows for diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 99a19512ee2..bdf2b8458ec 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -33,18 +33,6 @@ #include <asm/pgalloc.h> #include <asm/tlbflush.h> -/* - * We need to delay page freeing for SMP as other CPUs can access pages - * which have been removed but not yet had their TLB entries invalidated. - * Also, as ARMv7 speculative prefetch can drag new entries into the TLB, - * we need to apply this same delaying tactic to ensure correct operation. - */ -#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) -#define tlb_fast_mode(tlb) 0 -#else -#define tlb_fast_mode(tlb) 1 -#endif - #define MMU_GATHER_BUNDLE 8 /* @@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); - if (!tlb_fast_mode(tlb)) { - free_pages_and_swap_cache(tlb->pages, tlb->nr); - tlb->nr = 0; - if (tlb->pages == tlb->local) - __tlb_alloc_page(tlb); - } + free_pages_and_swap_cache(tlb->pages, tlb->nr); + tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } static inline void @@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - tlb->pages[tlb->nr++] = page; VM_BUG_ON(tlb->nr > tlb->max); return tlb->max - tlb->nr; diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index c3ffe3e54ed..ef3a9de0195 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -46,12 +46,6 @@ #include <asm/tlbflush.h> #include <asm/machvec.h> -#ifdef CONFIG_SMP -# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) -#else -# define tlb_fast_mode(tlb) (1) -#endif - /* * If we can't allocate a page to make a big batch of page pointers * to work on, then just handle a few from the on-stack structure. @@ -60,7 +54,7 @@ struct mmu_gather { struct mm_struct *mm; - unsigned int nr; /* == ~0U => fast mode */ + unsigned int nr; unsigned int max; unsigned char fullmm; /* non-zero means full mm flush */ unsigned char need_flush; /* really unmapped some PTEs? */ @@ -103,6 +97,7 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; static inline void ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) { + unsigned long i; unsigned int nr; if (!tlb->need_flush) @@ -141,13 +136,11 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e /* lastly, release the freed pages */ nr = tlb->nr; - if (!tlb_fast_mode(tlb)) { - unsigned long i; - tlb->nr = 0; - tlb->start_addr = ~0UL; - for (i = 0; i < nr; ++i) - free_page_and_swap_cache(tlb->pages[i]); - } + + tlb->nr = 0; + tlb->start_addr = ~0UL; + for (i = 0; i < nr; ++i) + free_page_and_swap_cache(tlb->pages[i]); } static inline void __tlb_alloc_page(struct mmu_gather *tlb) @@ -167,20 +160,7 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); tlb->pages = tlb->local; - /* - * Use fast mode if only 1 CPU is online. - * - * It would be tempting to turn on fast-mode for full_mm_flush as well. But this - * doesn't work because of speculative accesses and software prefetching: the page - * table of "mm" may (and usually is) the currently active page table and even - * though the kernel won't do any user-space accesses during the TLB shoot down, a - * compiler might use speculation or lfetch.fault on what happens to be a valid - * user-space address. This in turn could trigger a TLB miss fault (or a VHPT - * walk) and re-insert a TLB entry we just removed. Slow mode avoids such - * problems. (We could make fast-mode work by switching the current task to a - * different "mm" during the shootdown.) --davidm 08/02/2002 - */ - tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; + tlb->nr = 0; tlb->fullmm = full_mm_flush; tlb->start_addr = ~0UL; } @@ -214,11 +194,6 @@ static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { tlb->need_flush = 1; - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu */ - } - if (!tlb->nr && tlb->pages == tlb->local) __tlb_alloc_page(tlb); diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 305c68b8d53..981c2dbd72c 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -628,7 +628,9 @@ int pcibios_add_device(struct pci_dev *dev) pa_data = boot_params.hdr.setup_data; while (pa_data) { - data = phys_to_virt(pa_data); + data = ioremap(pa_data, sizeof(*rom)); + if (!data) + return -ENOMEM; if (data->type == SETUP_PCI) { rom = (struct pci_setup_rom *)data; @@ -645,6 +647,7 @@ int pcibios_add_device(struct pci_dev *dev) } } pa_data = data->next; + iounmap(data); } return 0; } diff --git a/drivers/iio/buffer_cb.c b/drivers/iio/buffer_cb.c index 9201022945e..9d19ba74f22 100644 --- a/drivers/iio/buffer_cb.c +++ b/drivers/iio/buffer_cb.c @@ -64,7 +64,7 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, while (chan->indio_dev) { if (chan->indio_dev != indio_dev) { ret = -EINVAL; - goto error_release_channels; + goto error_free_scan_mask; } set_bit(chan->channel->scan_index, cb_buff->buffer.scan_mask); @@ -73,6 +73,8 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev, return cb_buff; +error_free_scan_mask: + kfree(cb_buff->buffer.scan_mask); error_release_channels: iio_channel_release_all(cb_buff->channels); error_free_cb_buff: @@ -100,6 +102,7 @@ EXPORT_SYMBOL_GPL(iio_channel_stop_all_cb); void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff) { + kfree(cb_buff->buffer.scan_mask); iio_channel_release_all(cb_buff->channels); kfree(cb_buff); } diff --git a/drivers/iio/frequency/adf4350.c b/drivers/iio/frequency/adf4350.c index a884252ac66..e76d4ace53f 100644 --- a/drivers/iio/frequency/adf4350.c +++ b/drivers/iio/frequency/adf4350.c @@ -212,7 +212,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq) (pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS | ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N | ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) | - ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9))); + ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3))); st->regs[ADF4350_REG3] = pdata->r3_user_settings & (ADF4350_REG3_12BIT_CLKDIV(0xFFF) | diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 795d100b4c3..98ddc323add 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -124,7 +124,7 @@ static int __of_iio_channel_get(struct iio_channel *channel, channel->indio_dev = indio_dev; index = iiospec.args_count ? iiospec.args[0] : 0; if (index >= indio_dev->num_channels) { - return -EINVAL; + err = -EINVAL; goto err_put; } channel->channel = &indio_dev->channels[index]; @@ -450,7 +450,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, s64 raw64 = raw; int ret; - ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE); + ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET); if (ret == 0) raw64 += offset; diff --git a/drivers/staging/android/alarm-dev.c b/drivers/staging/android/alarm-dev.c index ceb1c643753..6dc27dac679 100644 --- a/drivers/staging/android/alarm-dev.c +++ b/drivers/staging/android/alarm-dev.c @@ -264,6 +264,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) } rv = alarm_do_ioctl(file, cmd, &ts); + if (rv) + return rv; switch (ANDROID_ALARM_BASE_CMD(cmd)) { case ANDROID_ALARM_GET_TIME(0): @@ -272,7 +274,7 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg) break; } - return rv; + return 0; } #ifdef CONFIG_COMPAT static long alarm_compat_ioctl(struct file *file, unsigned int cmd, @@ -295,6 +297,8 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd, } rv = alarm_do_ioctl(file, cmd, &ts); + if (rv) + return rv; switch (ANDROID_ALARM_BASE_CMD(cmd)) { case ANDROID_ALARM_GET_TIME(0): /* NOTE: we modified cmd above */ @@ -303,7 +307,7 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd, break; } - return rv; + return 0; } #endif diff --git a/drivers/staging/dwc2/hcd.c b/drivers/staging/dwc2/hcd.c index 827ab781ae9..8551ccedf03 100644 --- a/drivers/staging/dwc2/hcd.c +++ b/drivers/staging/dwc2/hcd.c @@ -2804,9 +2804,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq, /* Set device flags indicating whether the HCD supports DMA */ if (hsotg->core_params->dma_enable > 0) { - if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0) - dev_warn(hsotg->dev, - "can't enable workaround for >2GB RAM\n"); + if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0) + dev_warn(hsotg->dev, "can't set DMA mask\n"); if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0) dev_warn(hsotg->dev, "can't enable workaround for >2GB RAM\n"); diff --git a/drivers/staging/zcache/ramster.h b/drivers/staging/zcache/ramster.h index e1f91d5a0f6..a858666eae6 100644 --- a/drivers/staging/zcache/ramster.h +++ b/drivers/staging/zcache/ramster.h @@ -11,10 +11,6 @@ #ifndef _ZCACHE_RAMSTER_H_ #define _ZCACHE_RAMSTER_H_ -#ifdef CONFIG_RAMSTER_MODULE -#define CONFIG_RAMSTER -#endif - #ifdef CONFIG_RAMSTER #include "ramster/ramster.h" #else diff --git a/drivers/staging/zcache/ramster/debug.c b/drivers/staging/zcache/ramster/debug.c index 327e4f0d98e..5b26ee977c2 100644 --- a/drivers/staging/zcache/ramster/debug.c +++ b/drivers/staging/zcache/ramster/debug.c @@ -1,6 +1,8 @@ #include <linux/atomic.h> #include "debug.h" +ssize_t ramster_foreign_eph_pages; +ssize_t ramster_foreign_pers_pages; #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> diff --git a/drivers/staging/zcache/ramster/ramster.c b/drivers/staging/zcache/ramster/ramster.c index b18b887db79..a937ce1fa27 100644 --- a/drivers/staging/zcache/ramster/ramster.c +++ b/drivers/staging/zcache/ramster/ramster.c @@ -66,8 +66,6 @@ static int ramster_remote_target_nodenum __read_mostly = -1; /* Used by this code. */ long ramster_flnodes; -ssize_t ramster_foreign_eph_pages; -ssize_t ramster_foreign_pers_pages; /* FIXME frontswap selfshrinking knobs in debugfs? */ static LIST_HEAD(ramster_rem_op_list); @@ -399,14 +397,18 @@ void ramster_count_foreign_pages(bool eph, int count) inc_ramster_foreign_eph_pages(); } else { dec_ramster_foreign_eph_pages(); +#ifdef CONFIG_RAMSTER_DEBUG WARN_ON_ONCE(ramster_foreign_eph_pages < 0); +#endif } } else { if (count > 0) { inc_ramster_foreign_pers_pages(); } else { dec_ramster_foreign_pers_pages(); +#ifdef CONFIG_RAMSTER_DEBUG WARN_ON_ONCE(ramster_foreign_pers_pages < 0); +#endif } } } diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 46528d57be7..86c00b1c558 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void) if (nr_uarts > UART_NR) nr_uarts = UART_NR; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; struct uart_port *port = &up->port; @@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options) * if so, search for the first available port that does have * console support. */ - if (co->index >= UART_NR) + if (co->index >= nr_uarts) co->index = 0; port = &serial8250_ports[co->index].port; if (!port->iobase && !port->membase) @@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p) int line; struct uart_port *port; - for (line = 0; line < UART_NR; line++) { + for (line = 0; line < nr_uarts; line++) { port = &serial8250_ports[line].port; if (uart_match_port(p, port)) return line; @@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev) { int i; - for (i = 0; i < UART_NR; i++) { + for (i = 0; i < nr_uarts; i++) { struct uart_8250_port *up = &serial8250_ports[i]; if (up->port.dev == &dev->dev) @@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /* * First, find a port entry which matches. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (uart_match_port(&serial8250_ports[i].port, port)) return &serial8250_ports[i]; @@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * free entry. We look for one which hasn't been previously * used (indicated by zero iobase). */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN && serial8250_ports[i].port.iobase == 0) return &serial8250_ports[i]; @@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * * That also failed. Last resort is to find any entry which * doesn't have a real port associated with it. */ - for (i = 0; i < UART_NR; i++) + for (i = 0; i < nr_uarts; i++) if (serial8250_ports[i].port.type == PORT_UNKNOWN) return &serial8250_ports[i]; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 147c9e19359..8cdfbd36589 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -761,6 +761,8 @@ static int imx_startup(struct uart_port *port) temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); + if (!sport->have_rtscts) + temp |= UCR2_IRTS; writel(temp, sport->port.membase + UCR2); if (USE_IRDA(sport)) { diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 89429410a24..0c8a9fa2be6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1166,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, ourport->tx_irq = ret; ourport->clk = clk_get(&platdev->dev, "uart"); + if (IS_ERR(ourport->clk)) { + pr_err("%s: Controller clock not found\n", + dev_name(&platdev->dev)); + return PTR_ERR(ourport->clk); + } + + ret = clk_prepare_enable(ourport->clk); + if (ret) { + pr_err("uart: clock failed to prepare+enable: %d\n", ret); + clk_put(ourport->clk); + return ret; + } /* Keep all interrupts masked and cleared */ if (s3c24xx_serial_has_interrupt_mask(port)) { @@ -1180,6 +1192,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); + clk_disable_unprepare(ourport->clk); return 0; } diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index caefc800f29..c88c4fb9459 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb, goto error; } for (totlen = u = 0; u < uurb->number_of_packets; u++) { - /* arbitrary limit, - * sufficient for USB 2.0 high-bandwidth iso */ - if (isopkt[u].length > 8192) { + /* + * arbitrary limit need for USB 3.0 + * bMaxBurst (0~15 allowed, 1~16 packets) + * bmAttributes (bit 1:0, mult 0~2, 1~3 packets) + * sizemax: 1024 * 16 * 3 = 49152 + */ + if (isopkt[u].length > 49152) { ret = -EINVAL; goto error; } diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 929e7dd6e58..8ce9d7fd6cf 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev) { struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); platform_device_unregister(exynos->usb2_phy); platform_device_unregister(exynos->usb3_phy); - device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child); clk_disable_unprepare(exynos->clk); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 227d4a7acad..eba9e2baf32 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci) { struct dwc3_pci *glue = pci_get_drvdata(pci); + platform_device_unregister(glue->dwc3); platform_device_unregister(glue->usb2_phy); platform_device_unregister(glue->usb3_phy); - platform_device_unregister(glue->dwc3); pci_set_drvdata(pci, NULL); pci_disable_device(pci); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2b6e7e00120..b5e5b35df49 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) dep = dwc->eps[epnum]; if (!dep) continue; - - dwc3_free_trb_pool(dep); - - if (epnum != 0 && epnum != 1) + /* + * Physical endpoints 0 and 1 are special; they form the + * bi-directional USB endpoint 0. + * + * For those two physical endpoints, we don't allocate a TRB + * pool nor do we add them the endpoints list. Due to that, we + * shouldn't do these two operations otherwise we would end up + * with all sorts of bugs when removing dwc3.ko. + */ + if (epnum != 0 && epnum != 1) { + dwc3_free_trb_pool(dep); list_del(&dep->endpoint.ep_list); + } kfree(dep); } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index acff5b8f6e8..f80d0330d54 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask) } static const unsigned char -max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 }; +max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 }; /* carryover low/fullspeed bandwidth that crosses uframe boundries */ static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8]) @@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) /* reschedule QH iff another request is queued */ if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) { rc = qh_schedule(ehci, qh); + if (rc == 0) { + qh_refresh(ehci, qh); + qh_link_periodic(ehci, qh); + } /* An error here likely indicates handshake failure * or no space left in the schedule. Neither fault @@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh) * * FIXME kill the now-dysfunctional queued urbs */ - if (rc != 0) + else { ehci_err(ehci, "can't reschedule qh %p, err %d\n", qh, rc); + } } /* maybe turn off periodic schedule */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 2cfc465925b..fbf75e57628 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); + if (!xhci->rh_bw) + goto no_bw; + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); for (i = 0; i < num_ports; i++) { struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; @@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } } +no_bw: xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; @@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) u32 page_size, temp; int i; + INIT_LIST_HEAD(&xhci->lpm_failed_devs); + INIT_LIST_HEAD(&xhci->cancel_cmd_list); + page_size = xhci_readl(xhci, &xhci->op_regs->page_size); xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size); for (i = 0; i < 16; i++) { @@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); if (!xhci->cmd_ring) goto fail; - INIT_LIST_HEAD(&xhci->cancel_cmd_list); xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring); xhci_dbg(xhci, "First segment DMA is 0x%llx\n", (unsigned long long)xhci->cmd_ring->first_seg->dma); @@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) if (xhci_setup_port_arrays(xhci, flags)) goto fail; - INIT_LIST_HEAD(&xhci->lpm_failed_devs); - /* Enable USB 3.0 device notifications for function remote wake, which * is necessary for allowing USB 3.0 devices to do remote wakeup from * U3 (device suspend). diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 1a30c380043..cc24e39b97d 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev) static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + /* + * Systems with the TI redriver that loses port status change events + * need to have the registers polled during D3, so avoid D3cold. + */ + if (xhci_compliance_mode_recovery_timer_quirk_check()) + pdev->no_d3cold = true; return xhci_suspend(xhci); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b4aa79d154b..d8f640b12dd 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) * Systems: * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 */ -static bool compliance_mode_recovery_timer_quirk_check(void) +bool xhci_compliance_mode_recovery_timer_quirk_check(void) { const char *dmi_product_name, *dmi_sys_vendor; @@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd) xhci_dbg(xhci, "Finished xhci_init\n"); /* Initializing Compliance Mode Recovery Data If Needed */ - if (compliance_mode_recovery_timer_quirk_check()) { + if (xhci_compliance_mode_recovery_timer_quirk_check()) { xhci->quirks |= XHCI_COMP_MODE_QUIRK; compliance_mode_recovery_timer_init(xhci); } @@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) struct usb_hcd *hcd = xhci_to_hcd(xhci); struct usb_hcd *secondary_hcd; int retval = 0; + bool comp_timer_running = false; /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. @@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* If restore operation fails, re-initialize the HC during resume */ if ((temp & STS_SRE) || hibernated) { + + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n"); + } + /* Let the USB core know _both_ roothubs lost power. */ usb_root_hub_lost_power(xhci->main_hcd->self.root_hub); usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub); @@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + comp_timer_running = true; + xhci_dbg(xhci, "Start the primary HCD\n"); retval = xhci_run(hcd->primary_hcd); if (!retval) { @@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) * to suffer the Compliance Mode issue again. It doesn't matter if * ports have entered previously to U0 before system's suspension. */ - if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running) compliance_mode_recovery_timer_init(xhci); /* Re-enable port polling. */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 29c978e3713..77600cefcaf 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx); struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index); +/* xHCI quirks */ +bool xhci_compliance_mode_recovery_timer_quirk_check(void); + #endif /* __LINUX_XHCI_HCD_H */ diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 8914dec49f0..9d3044bdebe 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum) void __iomem *mbase = musb->mregs; struct dma_channel *dma; bool transfer_pending = false; - static bool use_sg; musb_ep_select(mbase, epnum); tx_csr = musb_readw(epio, MUSB_TXCSR); @@ -1463,9 +1462,9 @@ done: * NULL. */ if (!urb->transfer_buffer) - use_sg = true; + qh->use_sg = true; - if (use_sg) { + if (qh->use_sg) { /* sg_miter_start is already done in musb_ep_program */ if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); @@ -1484,9 +1483,9 @@ done: qh->segsize = length; - if (use_sg) { + if (qh->use_sg) { if (offset + length >= urb->transfer_buffer_length) - use_sg = false; + qh->use_sg = false; } musb_ep_select(mbase, epnum); @@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum) bool done = false; u32 status; struct dma_channel *dma; - static bool use_sg; unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG; musb_ep_select(mbase, epnum); @@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum) * NULL. */ if (!urb->transfer_buffer) { - use_sg = true; + qh->use_sg = true; sg_miter_start(&qh->sg_miter, urb->sg, 1, sg_flags); } - if (use_sg) { + if (qh->use_sg) { if (!sg_miter_next(&qh->sg_miter)) { dev_err(musb->controller, "error: sg list empty\n"); sg_miter_stop(&qh->sg_miter); @@ -1913,8 +1911,8 @@ finish: urb->actual_length += xfer_len; qh->offset += xfer_len; if (done) { - if (use_sg) - use_sg = false; + if (qh->use_sg) + qh->use_sg = false; if (urb->status == -EINPROGRESS) urb->status = status; diff --git a/drivers/usb/musb/musb_host.h b/drivers/usb/musb/musb_host.h index 5a9c8feec10..738f7eb60df 100644 --- a/drivers/usb/musb/musb_host.h +++ b/drivers/usb/musb/musb_host.h @@ -74,6 +74,7 @@ struct musb_qh { u16 frame; /* for periodic schedule */ unsigned iso_idx; /* in urb->iso_frame_desc[] */ struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */ + bool use_sg; /* to track urb using sglist */ }; /* map from control or bulk queue head to the first qh on that ring */ diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 3b16118cbf6..40e7fd94646 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -43,7 +43,7 @@ #define DRIVER_NAME "ark3116" /* usb timeout of 1 second */ -#define ARK_TIMEOUT (1*HZ) +#define ARK_TIMEOUT 1000 static const struct usb_device_id id_table[] = { { USB_DEVICE(0x6547, 0x0232) }, diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index d341555d37d..082120198f8 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = { static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ }; @@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, + { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, { } /* Terminating entry */ }; @@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = { * Cypress serial helper functions *****************************************************************************/ +/* FRWD Dongle hidcom needs to skip reset and speed checks */ +static inline bool is_frwd(struct usb_device *dev) +{ + return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) && + (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD)); +} static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) { @@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) if (unstable_bauds) return new_rate; + /* FRWD Dongle uses 115200 bps */ + if (is_frwd(port->serial->dev)) + return new_rate; + /* * The general purpose firmware for the Cypress M8 allows for * a maximum speed of 57600bps (I have no idea whether DeLorme @@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port) return -ENOMEM; } - usb_reset_configuration(serial->dev); + /* Skip reset for FRWD device. It is a workaound: + device hangs if it receives SET_CONFIGURE in Configured + state. */ + if (!is_frwd(serial->dev)) + usb_reset_configuration(serial->dev); priv->cmd_ctrl = 0; priv->line_control = 0; diff --git a/drivers/usb/serial/cypress_m8.h b/drivers/usb/serial/cypress_m8.h index 67cf6082688..b461311a2ae 100644 --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,10 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500 +/* FRWD Dongle - a GPS sports watch */ +#define VENDOR_ID_FRWD 0x6737 +#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001 + /* Powercom UPS, chip CY7C63723 */ #define VENDOR_ID_POWERCOM 0x0d9f #define PRODUCT_ID_UPS 0x0002 diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 9d74c278b7b..790673e5faa 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_sndbulkpipe(serial->dev, port->bulk_out_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); @@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count) usb_bulk_msg(serial->dev, usb_rcvbulkpipe(serial->dev, port->bulk_in_endpointAddress), buf, - count, &actual, HZ * 1); + count, &actual, 1000); if (status != IUU_OPERATION_OK) dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index eb30d7b01f3..3549d073df2 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, struct keyspan_serial_private *s_priv; struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; - int outcont_urb; struct urb *this_urb; int device_port, err; @@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, d_details = s_priv->device_details; device_port = port->number - port->serial->minor; - outcont_urb = d_details->outcont_endpoints[port->number]; this_urb = p_priv->outcont_urb; dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe)); @@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__ - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif - return 0; } diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index cc0e54345df..f27c621a929 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -40,7 +40,7 @@ #define DRIVER_DESC "Moschip USB Serial Driver" /* default urb timeout */ -#define MOS_WDR_TIMEOUT (HZ * 5) +#define MOS_WDR_TIMEOUT 5000 #define MOS_MAX_PORT 0x02 #define MOS_WRITE 0x0E @@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, __u8 requesttype = (__u8)0xc0; __u16 index = get_reg_index(reg); __u16 value = get_reg_value(reg, serial_portnum); - int status = usb_control_msg(usbdev, pipe, request, requesttype, value, - index, data, 1, MOS_WDR_TIMEOUT); - if (status < 0) + u8 *buf; + int status; + + buf = kmalloc(1, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + status = usb_control_msg(usbdev, pipe, request, requesttype, value, + index, buf, 1, MOS_WDR_TIMEOUT); + if (status == 1) + *data = *buf; + else if (status < 0) dev_err(&usbdev->dev, "mos7720: usb_control_msg() failed: %d", status); + kfree(buf); + return status; } @@ -1618,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty, mos7720_port->shadowMCR |= (UART_MCR_XONANY); /* To set hardware flow control to the specified * * serial port, in SP1/2_CONTROL_REG */ - if (port->number) + if (port_number) write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01); else write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02); @@ -1927,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial) /* setting configuration feature to one */ usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), - (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ); + (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000); /* start the interrupt urb */ ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL); @@ -1970,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial) /* wait for synchronous usb calls to return */ if (mos_parport->msg_pending) wait_for_completion_timeout(&mos_parport->syncmsg_compl, - MOS_WDR_TIMEOUT); + msecs_to_jiffies(MOS_WDR_TIMEOUT)); parport_remove_port(mos_parport->pp); usb_set_serial_data(serial, NULL); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index a0d5ea54598..7e998081e1c 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty, static int mos7810_check(struct usb_serial *serial) { int i, pass_count = 0; + u8 *buf; __u16 data = 0, mcr_data = 0; __u16 test_pattern = 0x55AA; + int res; + + buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (!buf) + return 0; /* failed to identify 7810 */ /* Store MCR setting */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER, - &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + mcr_data = *buf; for (i = 0; i < 16; i++) { /* Send the 1-bit test pattern out to MCS7810 test pin */ @@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial) MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); /* Read the test pattern back */ - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + res = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ, + MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + if (res == VENDOR_READ_LENGTH) + data = *buf; /* If this is a MCS7810 device, both test patterns must match */ if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001) @@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial) MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT); + kfree(buf); + if (pass_count == 16) return 1; @@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial) static int mos7840_calc_num_ports(struct usb_serial *serial) { __u16 data = 0x00; + u8 *buf; int mos7840_num_ports; - usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data, - VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL); + if (buf) { + usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf, + VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT); + data = *buf; + kfree(buf); + } if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 || serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) { diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 93d02bc4eb5..bd4323ddae1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 -#define ZTE_PRODUCT_CDMA_TECH 0xfffe -#define ZTE_PRODUCT_AC8710 0xfff1 -#define ZTE_PRODUCT_AC2726 0xfff5 -#define ZTE_PRODUCT_AC8710T 0xffff #define ZTE_PRODUCT_MC2718 0xffe8 -#define ZTE_PRODUCT_AD3812 0xffeb -#define ZTE_PRODUCT_MC2716 0xffed #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = { .reserved = BIT(4), }; -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - static const struct option_blacklist_info zte_mc2718_z_blacklist = { .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), }; -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - static const struct option_blacklist_info huawei_cdc12_blacklist = { .reserved = BIT(1) | BIT(2), }; @@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ + .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, @@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, - { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */ @@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, + /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 59b32b78212..bd794b43898 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ {USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */ {USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */ + {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */ /* non Gobi Qualcomm serial devices */ {USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4753c005cfb..5f6b1ff9d29 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { struct usb_serial_port *port = tty->driver_data; - int retval = -ENODEV; + int retval = -ENOIOCTLCMD; dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd); @@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty, default: if (port->serial->type->ioctl) retval = port->serial->type->ioctl(tty, cmd, arg); - else - retval = -ENOIOCTLCMD; } return retval; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 7573ec8a084..9910aa2edf4 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial) */ #define COPY_PORT(dest, src) \ do { \ + int i; \ + \ + for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \ + dest->read_urbs[i] = src->read_urbs[i]; \ + dest->read_urbs[i]->context = dest; \ + dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \ + } \ dest->read_urb = src->read_urb; \ dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\ dest->bulk_in_buffer = src->bulk_in_buffer; \ + dest->bulk_in_size = src->bulk_in_size; \ dest->interrupt_in_urb = src->interrupt_in_urb; \ + dest->interrupt_in_urb->context = dest; \ dest->interrupt_in_endpointAddress = \ src->interrupt_in_endpointAddress;\ dest->interrupt_in_buffer = src->interrupt_in_buffer; \ diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index b9fca3586d7..347caad47a1 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty) struct whiteheat_port_settings port_settings; unsigned int cflag = tty->termios.c_cflag; - port_settings.port = port->number + 1; + port_settings.port = port->number - port->serial->minor + 1; /* get the byte size */ switch (cflag & CSIZE) { diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c index 39ee7373b4e..fca4c752a4e 100644 --- a/drivers/usb/serial/zte_ev.c +++ b/drivers/usb/serial/zte_ev.c @@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, int len; unsigned char *buf; - if (port->number != 0) - return -ENODEV; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return -ENOMEM; @@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0001, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st cmd and recieve data */ @@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 3 cmd */ @@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 5 cmd */ @@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 6 cmd */ @@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty, result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); kfree(buf); @@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) int len; unsigned char *buf; - if (port->number != 0) - return; - buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL); if (!buf) return; @@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0002, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */ @@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 3st cmd and recieve data */ @@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 4 cmd */ @@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 5 cmd */ @@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); /* send 6 cmd */ @@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x21, 0xa1, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 7 cmd */ @@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x20, 0x21, 0x0000, 0x0000, buf, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); debug_data(dev, __func__, len, buf, result); /* send 8 cmd */ @@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x22, 0x21, 0x0003, 0x0000, NULL, len, - HZ * USB_CTRL_GET_TIMEOUT); + USB_CTRL_GET_TIMEOUT); dev_dbg(dev, "result = %d\n", result); kfree(buf); @@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port) } static const struct usb_device_id id_table[] = { - { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */ - { USB_DEVICE(0x19d2, 0xfffe) }, - { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */ + /* AC8710, AC8710T */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) }, + /* AC8700 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) }, + /* MG880 */ + { USB_DEVICE(0x19d2, 0xfffd) }, + { USB_DEVICE(0x19d2, 0xfffc) }, + { USB_DEVICE(0x19d2, 0xfffb) }, + /* AC2726, AC8710_V3 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xfff6) }, + { USB_DEVICE(0x19d2, 0xfff7) }, + { USB_DEVICE(0x19d2, 0xfff8) }, + { USB_DEVICE(0x19d2, 0xfff9) }, + { USB_DEVICE(0x19d2, 0xffee) }, + /* AC2716, MC2716 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) }, + /* AD3812 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) }, + { USB_DEVICE(0x19d2, 0xffec) }, { USB_DEVICE(0x05C6, 0x3197) }, { USB_DEVICE(0x05C6, 0x6000) }, + { USB_DEVICE(0x05C6, 0x9008) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/fs/xfs/xfs_acl.c b/fs/xfs/xfs_acl.c index 1d32f1d5276..306d883d89b 100644 --- a/fs/xfs/xfs_acl.c +++ b/fs/xfs/xfs_acl.c @@ -21,6 +21,8 @@ #include "xfs_bmap_btree.h" #include "xfs_inode.h" #include "xfs_vnodeops.h" +#include "xfs_sb.h" +#include "xfs_mount.h" #include "xfs_trace.h" #include <linux/slab.h> #include <linux/xattr.h> @@ -34,7 +36,9 @@ */ STATIC struct posix_acl * -xfs_acl_from_disk(struct xfs_acl *aclp) +xfs_acl_from_disk( + struct xfs_acl *aclp, + int max_entries) { struct posix_acl_entry *acl_e; struct posix_acl *acl; @@ -42,7 +46,7 @@ xfs_acl_from_disk(struct xfs_acl *aclp) unsigned int count, i; count = be32_to_cpu(aclp->acl_cnt); - if (count > XFS_ACL_MAX_ENTRIES) + if (count > max_entries) return ERR_PTR(-EFSCORRUPTED); acl = posix_acl_alloc(count, GFP_KERNEL); @@ -108,9 +112,9 @@ xfs_get_acl(struct inode *inode, int type) struct xfs_inode *ip = XFS_I(inode); struct posix_acl *acl; struct xfs_acl *xfs_acl; - int len = sizeof(struct xfs_acl); unsigned char *ea_name; int error; + int len; acl = get_cached_acl(inode, type); if (acl != ACL_NOT_CACHED) @@ -133,8 +137,8 @@ xfs_get_acl(struct inode *inode, int type) * If we have a cached ACLs value just return it, not need to * go out to the disk. */ - - xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL); + len = XFS_ACL_MAX_SIZE(ip->i_mount); + xfs_acl = kzalloc(len, GFP_KERNEL); if (!xfs_acl) return ERR_PTR(-ENOMEM); @@ -153,7 +157,7 @@ xfs_get_acl(struct inode *inode, int type) goto out; } - acl = xfs_acl_from_disk(xfs_acl); + acl = xfs_acl_from_disk(xfs_acl, XFS_ACL_MAX_ENTRIES(ip->i_mount)); if (IS_ERR(acl)) goto out; @@ -189,16 +193,17 @@ xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl) if (acl) { struct xfs_acl *xfs_acl; - int len; + int len = XFS_ACL_MAX_SIZE(ip->i_mount); - xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL); + xfs_acl = kzalloc(len, GFP_KERNEL); if (!xfs_acl) return -ENOMEM; xfs_acl_to_disk(xfs_acl, acl); - len = sizeof(struct xfs_acl) - - (sizeof(struct xfs_acl_entry) * - (XFS_ACL_MAX_ENTRIES - acl->a_count)); + + /* subtract away the unused acl entries */ + len -= sizeof(struct xfs_acl_entry) * + (XFS_ACL_MAX_ENTRIES(ip->i_mount) - acl->a_count); error = -xfs_attr_set(ip, ea_name, (unsigned char *)xfs_acl, len, ATTR_ROOT); @@ -243,7 +248,7 @@ xfs_set_mode(struct inode *inode, umode_t mode) static int xfs_acl_exists(struct inode *inode, unsigned char *name) { - int len = sizeof(struct xfs_acl); + int len = XFS_ACL_MAX_SIZE(XFS_M(inode->i_sb)); return (xfs_attr_get(XFS_I(inode), name, NULL, &len, ATTR_ROOT|ATTR_KERNOVAL) == 0); @@ -379,7 +384,7 @@ xfs_xattr_acl_set(struct dentry *dentry, const char *name, goto out_release; error = -EINVAL; - if (acl->a_count > XFS_ACL_MAX_ENTRIES) + if (acl->a_count > XFS_ACL_MAX_ENTRIES(XFS_M(inode->i_sb))) goto out_release; if (type == ACL_TYPE_ACCESS) { diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h index 39632d94135..4016a567b83 100644 --- a/fs/xfs/xfs_acl.h +++ b/fs/xfs/xfs_acl.h @@ -22,19 +22,36 @@ struct inode; struct posix_acl; struct xfs_inode; -#define XFS_ACL_MAX_ENTRIES 25 #define XFS_ACL_NOT_PRESENT (-1) /* On-disk XFS access control list structure */ +struct xfs_acl_entry { + __be32 ae_tag; + __be32 ae_id; + __be16 ae_perm; + __be16 ae_pad; /* fill the implicit hole in the structure */ +}; + struct xfs_acl { - __be32 acl_cnt; - struct xfs_acl_entry { - __be32 ae_tag; - __be32 ae_id; - __be16 ae_perm; - } acl_entry[XFS_ACL_MAX_ENTRIES]; + __be32 acl_cnt; + struct xfs_acl_entry acl_entry[0]; }; +/* + * The number of ACL entries allowed is defined by the on-disk format. + * For v4 superblocks, that is limited to 25 entries. For v5 superblocks, it is + * limited only by the maximum size of the xattr that stores the information. + */ +#define XFS_ACL_MAX_ENTRIES(mp) \ + (xfs_sb_version_hascrc(&mp->m_sb) \ + ? (XATTR_SIZE_MAX - sizeof(struct xfs_acl)) / \ + sizeof(struct xfs_acl_entry) \ + : 25) + +#define XFS_ACL_MAX_SIZE(mp) \ + (sizeof(struct xfs_acl) + \ + sizeof(struct xfs_acl_entry) * XFS_ACL_MAX_ENTRIES((mp))) + /* On-disk XFS extended attribute names */ #define SGI_ACL_FILE (unsigned char *)"SGI_ACL_FILE" #define SGI_ACL_DEFAULT (unsigned char *)"SGI_ACL_DEFAULT" diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c index d788302e506..31d3cd12926 100644 --- a/fs/xfs/xfs_attr_leaf.c +++ b/fs/xfs/xfs_attr_leaf.c @@ -3258,7 +3258,7 @@ xfs_attr3_leaf_inactive( name_rmt = xfs_attr3_leaf_name_remote(leaf, i); if (name_rmt->valueblk) { lp->valueblk = be32_to_cpu(name_rmt->valueblk); - lp->valuelen = XFS_B_TO_FSB(dp->i_mount, + lp->valuelen = xfs_attr3_rmt_blocks(dp->i_mount, be32_to_cpu(name_rmt->valuelen)); lp++; } diff --git a/fs/xfs/xfs_dquot.c b/fs/xfs/xfs_dquot.c index a41f8bf1da3..044e97a33c8 100644 --- a/fs/xfs/xfs_dquot.c +++ b/fs/xfs/xfs_dquot.c @@ -249,8 +249,11 @@ xfs_qm_init_dquot_blk( d->dd_diskdq.d_version = XFS_DQUOT_VERSION; d->dd_diskdq.d_id = cpu_to_be32(curid); d->dd_diskdq.d_flags = type; - if (xfs_sb_version_hascrc(&mp->m_sb)) + if (xfs_sb_version_hascrc(&mp->m_sb)) { uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid); + xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } } xfs_trans_dquot_buf(tp, bp, @@ -286,23 +289,6 @@ xfs_dquot_set_prealloc_limits(struct xfs_dquot *dqp) dqp->q_low_space[XFS_QLOWSP_5_PCNT] = space * 5; } -STATIC void -xfs_dquot_buf_calc_crc( - struct xfs_mount *mp, - struct xfs_buf *bp) -{ - struct xfs_dqblk *d = (struct xfs_dqblk *)bp->b_addr; - int i; - - if (!xfs_sb_version_hascrc(&mp->m_sb)) - return; - - for (i = 0; i < mp->m_quotainfo->qi_dqperchunk; i++, d++) { - xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), - offsetof(struct xfs_dqblk, dd_crc)); - } -} - STATIC bool xfs_dquot_buf_verify_crc( struct xfs_mount *mp, @@ -328,12 +314,11 @@ xfs_dquot_buf_verify_crc( for (i = 0; i < ndquots; i++, d++) { if (!xfs_verify_cksum((char *)d, sizeof(struct xfs_dqblk), - offsetof(struct xfs_dqblk, dd_crc))) + XFS_DQUOT_CRC_OFF)) return false; if (!uuid_equal(&d->dd_uuid, &mp->m_sb.sb_uuid)) return false; } - return true; } @@ -393,6 +378,11 @@ xfs_dquot_buf_read_verify( } } +/* + * we don't calculate the CRC here as that is done when the dquot is flushed to + * the buffer after the update is done. This ensures that the dquot in the + * buffer always has an up-to-date CRC value. + */ void xfs_dquot_buf_write_verify( struct xfs_buf *bp) @@ -404,7 +394,6 @@ xfs_dquot_buf_write_verify( xfs_buf_ioerror(bp, EFSCORRUPTED); return; } - xfs_dquot_buf_calc_crc(mp, bp); } const struct xfs_buf_ops xfs_dquot_buf_ops = { @@ -1151,11 +1140,17 @@ xfs_qm_dqflush( * copy the lsn into the on-disk dquot now while we have the in memory * dquot here. This can't be done later in the write verifier as we * can't get access to the log item at that point in time. + * + * We also calculate the CRC here so that the on-disk dquot in the + * buffer always has a valid CRC. This ensures there is no possibility + * of a dquot without an up-to-date CRC getting to disk. */ if (xfs_sb_version_hascrc(&mp->m_sb)) { struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddqp; dqb->dd_lsn = cpu_to_be64(dqp->q_logitem.qli_item.li_lsn); + xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); } /* diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index efbe1accb6c..7f7be5f98f5 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -1638,6 +1638,10 @@ xfs_iunlink( dip->di_next_unlinked = agi->agi_unlinked[bucket_index]; offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1723,6 +1727,10 @@ xfs_iunlink_remove( dip->di_next_unlinked = cpu_to_be32(NULLAGINO); offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1796,6 +1804,10 @@ xfs_iunlink_remove( dip->di_next_unlinked = cpu_to_be32(NULLAGINO); offset = ip->i_imap.im_boffset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, dip); + xfs_trans_inode_buf(tp, ibp); xfs_trans_log_buf(tp, ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); @@ -1809,6 +1821,10 @@ xfs_iunlink_remove( last_dip->di_next_unlinked = cpu_to_be32(next_agino); ASSERT(next_agino != 0); offset = last_offset + offsetof(xfs_dinode_t, di_next_unlinked); + + /* need to recalc the inode CRC if appropriate */ + xfs_dinode_calc_crc(mp, last_dip); + xfs_trans_inode_buf(tp, last_ibp); xfs_trans_log_buf(tp, last_ibp, offset, (offset + sizeof(xfs_agino_t) - 1)); diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index d9e4d3c3991..45a85ff84da 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1599,10 +1599,43 @@ xlog_recover_add_to_trans( } /* - * Sort the log items in the transaction. Cancelled buffers need - * to be put first so they are processed before any items that might - * modify the buffers. If they are cancelled, then the modifications - * don't need to be replayed. + * Sort the log items in the transaction. + * + * The ordering constraints are defined by the inode allocation and unlink + * behaviour. The rules are: + * + * 1. Every item is only logged once in a given transaction. Hence it + * represents the last logged state of the item. Hence ordering is + * dependent on the order in which operations need to be performed so + * required initial conditions are always met. + * + * 2. Cancelled buffers are recorded in pass 1 in a separate table and + * there's nothing to replay from them so we can simply cull them + * from the transaction. However, we can't do that until after we've + * replayed all the other items because they may be dependent on the + * cancelled buffer and replaying the cancelled buffer can remove it + * form the cancelled buffer table. Hence they have tobe done last. + * + * 3. Inode allocation buffers must be replayed before inode items that + * read the buffer and replay changes into it. + * + * 4. Inode unlink buffers must be replayed after inode items are replayed. + * This ensures that inodes are completely flushed to the inode buffer + * in a "free" state before we remove the unlinked inode list pointer. + * + * Hence the ordering needs to be inode allocation buffers first, inode items + * second, inode unlink buffers third and cancelled buffers last. + * + * But there's a problem with that - we can't tell an inode allocation buffer + * apart from a regular buffer, so we can't separate them. We can, however, + * tell an inode unlink buffer from the others, and so we can separate them out + * from all the other buffers and move them to last. + * + * Hence, 4 lists, in order from head to tail: + * - buffer_list for all buffers except cancelled/inode unlink buffers + * - item_list for all non-buffer items + * - inode_buffer_list for inode unlink buffers + * - cancel_list for the cancelled buffers */ STATIC int xlog_recover_reorder_trans( @@ -1612,6 +1645,10 @@ xlog_recover_reorder_trans( { xlog_recover_item_t *item, *n; LIST_HEAD(sort_list); + LIST_HEAD(cancel_list); + LIST_HEAD(buffer_list); + LIST_HEAD(inode_buffer_list); + LIST_HEAD(inode_list); list_splice_init(&trans->r_itemq, &sort_list); list_for_each_entry_safe(item, n, &sort_list, ri_list) { @@ -1619,12 +1656,18 @@ xlog_recover_reorder_trans( switch (ITEM_TYPE(item)) { case XFS_LI_BUF: - if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) { + if (buf_f->blf_flags & XFS_BLF_CANCEL) { trace_xfs_log_recover_item_reorder_head(log, trans, item, pass); - list_move(&item->ri_list, &trans->r_itemq); + list_move(&item->ri_list, &cancel_list); + break; + } + if (buf_f->blf_flags & XFS_BLF_INODE_BUF) { + list_move(&item->ri_list, &inode_buffer_list); break; } + list_move_tail(&item->ri_list, &buffer_list); + break; case XFS_LI_INODE: case XFS_LI_DQUOT: case XFS_LI_QUOTAOFF: @@ -1632,7 +1675,7 @@ xlog_recover_reorder_trans( case XFS_LI_EFI: trace_xfs_log_recover_item_reorder_tail(log, trans, item, pass); - list_move_tail(&item->ri_list, &trans->r_itemq); + list_move_tail(&item->ri_list, &inode_list); break; default: xfs_warn(log->l_mp, @@ -1643,6 +1686,14 @@ xlog_recover_reorder_trans( } } ASSERT(list_empty(&sort_list)); + if (!list_empty(&buffer_list)) + list_splice(&buffer_list, &trans->r_itemq); + if (!list_empty(&inode_list)) + list_splice_tail(&inode_list, &trans->r_itemq); + if (!list_empty(&inode_buffer_list)) + list_splice_tail(&inode_buffer_list, &trans->r_itemq); + if (!list_empty(&cancel_list)) + list_splice_tail(&cancel_list, &trans->r_itemq); return 0; } @@ -1861,6 +1912,15 @@ xlog_recover_do_inode_buffer( buffer_nextp = (xfs_agino_t *)xfs_buf_offset(bp, next_unlinked_offset); *buffer_nextp = *logged_nextp; + + /* + * If necessary, recalculate the CRC in the on-disk inode. We + * have to leave the inode in a consistent state for whoever + * reads it next.... + */ + xfs_dinode_calc_crc(mp, (struct xfs_dinode *) + xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize)); + } return 0; @@ -2266,6 +2326,12 @@ xfs_qm_dqcheck( d->dd_diskdq.d_flags = type; d->dd_diskdq.d_id = cpu_to_be32(id); + if (xfs_sb_version_hascrc(&mp->m_sb)) { + uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid); + xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } + return errs; } @@ -2793,6 +2859,10 @@ xlog_recover_dquot_pass2( } memcpy(ddq, recddq, item->ri_buf[1].i_len); + if (xfs_sb_version_hascrc(&mp->m_sb)) { + xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } ASSERT(dq_f->qlf_size == 2); ASSERT(bp->b_target->bt_mount == mp); diff --git a/fs/xfs/xfs_qm.c b/fs/xfs/xfs_qm.c index f41702b4300..b75c9bb6e71 100644 --- a/fs/xfs/xfs_qm.c +++ b/fs/xfs/xfs_qm.c @@ -41,6 +41,7 @@ #include "xfs_qm.h" #include "xfs_trace.h" #include "xfs_icache.h" +#include "xfs_cksum.h" /* * The global quota manager. There is only one of these for the entire @@ -839,7 +840,7 @@ xfs_qm_reset_dqcounts( xfs_dqid_t id, uint type) { - xfs_disk_dquot_t *ddq; + struct xfs_dqblk *dqb; int j; trace_xfs_reset_dqcounts(bp, _RET_IP_); @@ -853,8 +854,12 @@ xfs_qm_reset_dqcounts( do_div(j, sizeof(xfs_dqblk_t)); ASSERT(mp->m_quotainfo->qi_dqperchunk == j); #endif - ddq = bp->b_addr; + dqb = bp->b_addr; for (j = 0; j < mp->m_quotainfo->qi_dqperchunk; j++) { + struct xfs_disk_dquot *ddq; + + ddq = (struct xfs_disk_dquot *)&dqb[j]; + /* * Do a sanity check, and if needed, repair the dqblk. Don't * output any warnings because it's perfectly possible to @@ -871,7 +876,12 @@ xfs_qm_reset_dqcounts( ddq->d_bwarns = 0; ddq->d_iwarns = 0; ddq->d_rtbwarns = 0; - ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1); + + if (xfs_sb_version_hascrc(&mp->m_sb)) { + xfs_update_cksum((char *)&dqb[j], + sizeof(struct xfs_dqblk), + XFS_DQUOT_CRC_OFF); + } } } @@ -907,19 +917,29 @@ xfs_qm_dqiter_bufs( XFS_FSB_TO_DADDR(mp, bno), mp->m_quotainfo->qi_dqchunklen, 0, &bp, &xfs_dquot_buf_ops); - if (error) - break; /* - * XXX(hch): need to figure out if it makes sense to validate - * the CRC here. + * CRC and validation errors will return a EFSCORRUPTED here. If + * this occurs, re-read without CRC validation so that we can + * repair the damage via xfs_qm_reset_dqcounts(). This process + * will leave a trace in the log indicating corruption has + * been detected. */ + if (error == EFSCORRUPTED) { + error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp, + XFS_FSB_TO_DADDR(mp, bno), + mp->m_quotainfo->qi_dqchunklen, 0, &bp, + NULL); + } + + if (error) + break; + xfs_qm_reset_dqcounts(mp, bp, firstid, type); xfs_buf_delwri_queue(bp, buffer_list); xfs_buf_relse(bp); - /* - * goto the next block. - */ + + /* goto the next block. */ bno++; firstid += mp->m_quotainfo->qi_dqperchunk; } diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h index c61e31c7d99..c38068f26c5 100644 --- a/fs/xfs/xfs_quota.h +++ b/fs/xfs/xfs_quota.h @@ -87,6 +87,8 @@ typedef struct xfs_dqblk { uuid_t dd_uuid; /* location information */ } xfs_dqblk_t; +#define XFS_DQUOT_CRC_OFF offsetof(struct xfs_dqblk, dd_crc) + /* * flags for q_flags field in the dquot. */ diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index ea341cea68c..3033ba5e976 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -1373,6 +1373,17 @@ xfs_finish_flags( } /* + * V5 filesystems always use attr2 format for attributes. + */ + if (xfs_sb_version_hascrc(&mp->m_sb) && + (mp->m_flags & XFS_MOUNT_NOATTR2)) { + xfs_warn(mp, +"Cannot mount a V5 filesystem as %s. %s is always enabled for V5 filesystems.", + MNTOPT_NOATTR2, MNTOPT_ATTR2); + return XFS_ERROR(EINVAL); + } + + /* * mkfs'ed attr2 will turn on attr2 mount unless explicitly * told by noattr2 to turn it off */ diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index b1b1fa6ffff..13821c339a4 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -97,11 +97,9 @@ struct mmu_gather { unsigned long start; unsigned long end; unsigned int need_flush : 1, /* Did free PTEs */ - fast_mode : 1; /* No batching */ - /* we are in the middle of an operation to clear * a full mm and can make some optimizations */ - unsigned int fullmm : 1, + fullmm : 1, /* we have performed an operation which * requires a complete flush of the tlb */ need_flush_all : 1; @@ -114,19 +112,6 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -static inline int tlb_fast_mode(struct mmu_gather *tlb) -{ -#ifdef CONFIG_SMP - return tlb->fast_mode; -#else - /* - * For UP we don't need to worry about TLB flush - * and page free order so much.. - */ - return 1; -#endif -} - void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm); void tlb_flush_mmu(struct mmu_gather *tlb); void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, diff --git a/include/linux/socket.h b/include/linux/socket.h index 33bf2dfab19..b10ce4b341e 100644 --- a/include/linux/socket.h +++ b/include/linux/socket.h @@ -320,6 +320,9 @@ extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data); struct timespec; +/* The __sys_...msg variants allow MSG_CMSG_COMPAT */ +extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags); +extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags); extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct timespec *timeout); extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, diff --git a/mm/memory.c b/mm/memory.c index 6dc1882fbd7..61a262b08e5 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -220,7 +220,6 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm) tlb->start = -1UL; tlb->end = 0; tlb->need_flush = 0; - tlb->fast_mode = (num_possible_cpus() == 1); tlb->local.next = NULL; tlb->local.nr = 0; tlb->local.max = ARRAY_SIZE(tlb->__pages); @@ -244,9 +243,6 @@ void tlb_flush_mmu(struct mmu_gather *tlb) tlb_table_flush(tlb); #endif - if (tlb_fast_mode(tlb)) - return; - for (batch = &tlb->local; batch; batch = batch->next) { free_pages_and_swap_cache(batch->pages, batch->nr); batch->nr = 0; @@ -288,11 +284,6 @@ int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) VM_BUG_ON(!tlb->need_flush); - if (tlb_fast_mode(tlb)) { - free_page_and_swap_cache(page); - return 1; /* avoid calling tlb_flush_mmu() */ - } - batch = tlb->active; batch->pages[batch->nr++] = page; if (batch->nr == batch->max) { diff --git a/net/compat.c b/net/compat.c index 79ae8848500..f0a1ba6c808 100644 --- a/net/compat.c +++ b/net/compat.c @@ -734,19 +734,25 @@ static unsigned char nas[21] = { asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags) { + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags) { - return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT); } asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned int flags) @@ -768,6 +774,9 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg, int datagrams; struct timespec ktspec; + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + if (COMPAT_USE_64BIT_TIME) return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT, diff --git a/net/socket.c b/net/socket.c index 1b930074a29..3ebdcb805c5 100644 --- a/net/socket.c +++ b/net/socket.c @@ -1956,7 +1956,7 @@ struct used_address { unsigned int name_len; }; -static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, struct used_address *used_address) { @@ -2071,26 +2071,30 @@ out: * BSD sendmsg interface */ -SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL); + err = ___sys_sendmsg(sock, msg, &msg_sys, flags, NULL); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_sendmsg(fd, msg, flags); +} + /* * Linux sendmmsg interface */ @@ -2121,15 +2125,16 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, while (datagrams < vlen) { if (MSG_CMSG_COMPAT & flags) { - err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_sendmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags, &used_address); + err = ___sys_sendmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags, &used_address); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2158,7 +2163,7 @@ SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg, return __sys_sendmmsg(fd, mmsg, vlen, flags); } -static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg, +static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg, struct msghdr *msg_sys, unsigned int flags, int nosec) { struct compat_msghdr __user *msg_compat = @@ -2250,27 +2255,31 @@ out: * BSD recvmsg interface */ -SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, - unsigned int, flags) +long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags) { int fput_needed, err; struct msghdr msg_sys; struct socket *sock; - if (flags & MSG_CMSG_COMPAT) - return -EINVAL; - sock = sockfd_lookup_light(fd, &err, &fput_needed); if (!sock) goto out; - err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0); + err = ___sys_recvmsg(sock, msg, &msg_sys, flags, 0); fput_light(sock->file, fput_needed); out: return err; } +SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg, + unsigned int, flags) +{ + if (flags & MSG_CMSG_COMPAT) + return -EINVAL; + return __sys_recvmsg(fd, msg, flags); +} + /* * Linux recvmmsg interface */ @@ -2308,17 +2317,18 @@ int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, * No need to ask LSM for more than the first datagram. */ if (MSG_CMSG_COMPAT & flags) { - err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, (struct msghdr __user *)compat_entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = __put_user(err, &compat_entry->msg_len); ++compat_entry; } else { - err = __sys_recvmsg(sock, (struct msghdr __user *)entry, - &msg_sys, flags & ~MSG_WAITFORONE, - datagrams); + err = ___sys_recvmsg(sock, + (struct msghdr __user *)entry, + &msg_sys, flags & ~MSG_WAITFORONE, + datagrams); if (err < 0) break; err = put_user(err, &entry->msg_len); @@ -2505,31 +2515,15 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args) (int __user *)a[4]); break; case SYS_SENDMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_SENDMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]); break; case SYS_RECVMSG: - if (a[2] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]); break; case SYS_RECVMMSG: - if (a[3] & MSG_CMSG_COMPAT) { - err = -EINVAL; - break; - } err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3], (struct timespec __user *)a[4]); break; diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 51bb3de680b..8337663aa29 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -264,7 +264,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb quiet_cmd_dtc = DTC $@ cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \ $(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \ - -i $(srctree)/arch/$(SRCARCH)/boot/dts $(DTC_FLAGS) \ + -i $(dir $<) $(DTC_FLAGS) \ -d $(depfile).dtc $(dtc-tmp) ; \ cat $(depfile).pre $(depfile).dtc > $(depfile) diff --git a/scripts/config b/scripts/config index bb4d3deb6d1..a65ecbbdd32 100755 --- a/scripts/config +++ b/scripts/config @@ -105,7 +105,7 @@ while [ "$1" != "" ] ; do ;; --refresh) ;; - --*-after) + --*-after|-E|-D|-M) checkarg "$1" A=$ARG checkarg "$2" diff --git a/scripts/kconfig/lxdialog/menubox.c b/scripts/kconfig/lxdialog/menubox.c index 48d382e7e37..38cd69c5660 100644 --- a/scripts/kconfig/lxdialog/menubox.c +++ b/scripts/kconfig/lxdialog/menubox.c @@ -303,10 +303,11 @@ do_resize: } } - if (i < max_choice || - key == KEY_UP || key == KEY_DOWN || - key == '-' || key == '+' || - key == KEY_PPAGE || key == KEY_NPAGE) { + if (item_count() != 0 && + (i < max_choice || + key == KEY_UP || key == KEY_DOWN || + key == '-' || key == '+' || + key == KEY_PPAGE || key == KEY_NPAGE)) { /* Remove highligt of current item */ print_item(scroll + choice, choice, FALSE); diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c index 387dc8daf7b..a69cbd78fb3 100644 --- a/scripts/kconfig/mconf.c +++ b/scripts/kconfig/mconf.c @@ -670,11 +670,12 @@ static void conf(struct menu *menu, struct menu *active_menu) active_menu, &s_scroll); if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL) break; - if (!item_activate_selected()) - continue; - if (!item_tag()) - continue; - + if (item_count() != 0) { + if (!item_activate_selected()) + continue; + if (!item_tag()) + continue; + } submenu = item_data(); active_menu = item_data(); if (submenu) diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index b5c7d90df9d..fd3f0180e08 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -146,11 +146,24 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e struct menu *menu = current_entry; while ((menu = menu->parent) != NULL) { + struct expr *dup_expr; + if (!menu->visibility) continue; + /* + * Do not add a reference to the + * menu's visibility expression but + * use a copy of it. Otherwise the + * expression reduction functions + * will modify expressions that have + * multiple references which can + * cause unwanted side effects. + */ + dup_expr = expr_copy(menu->visibility); + prop->visible.expr = expr_alloc_and(prop->visible.expr, - menu->visibility); + dup_expr); } } |