diff options
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 105 | ||||
| -rw-r--r-- | drivers/net/Makefile | 7 | ||||
| -rw-r--r-- | drivers/net/ethernet/8390/Kconfig | 21 | ||||
| -rw-r--r-- | drivers/net/ethernet/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/Kconfig | 131 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/Makefile | 11 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/epic100.c (renamed from drivers/net/epic100.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc911x.c (renamed from drivers/net/smc911x.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc911x.h (renamed from drivers/net/smc911x.h) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc9194.c (renamed from drivers/net/smc9194.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc9194.h (renamed from drivers/net/smc9194.h) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91c92_cs.c (renamed from drivers/net/pcmcia/smc91c92_cs.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91x.c (renamed from drivers/net/smc91x.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smc91x.h (renamed from drivers/net/smc91x.h) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.c (renamed from drivers/net/smsc911x.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc911x.h (renamed from drivers/net/smsc911x.h) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc9420.c (renamed from drivers/net/smsc9420.c) | 0 | ||||
| -rw-r--r-- | drivers/net/ethernet/smsc/smsc9420.h (renamed from drivers/net/smsc9420.h) | 0 | ||||
| -rw-r--r-- | drivers/net/pcmcia/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/net/pcmcia/Makefile | 1 |
22 files changed, 151 insertions, 144 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 8f2821c3082..7c0294cdf9f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5869,7 +5869,7 @@ F: mm/sl?b.c SMC91x ETHERNET DRIVER M: Nicolas Pitre <nico@fluxnic.net> S: Odd Fixes -F: drivers/net/smc91x.* +F: drivers/net/ethernet/smsc/smc91x.* SMM665 HARDWARE MONITOR DRIVER M: Guenter Roeck <linux@roeck-us.net> @@ -5904,13 +5904,13 @@ M: Steve Glendinning <steve.glendinning@smsc.com> L: netdev@vger.kernel.org S: Supported F: include/linux/smsc911x.h -F: drivers/net/smsc911x.* +F: drivers/net/ethernet/smsc/smsc911x.* SMSC9420 PCI ETHERNET DRIVER M: Steve Glendinning <steve.glendinning@smsc.com> L: netdev@vger.kernel.org S: Supported -F: drivers/net/smsc9420.* +F: drivers/net/ethernet/smsc/smsc9420.* SN-IA64 (Itanium) SUB-PLATFORM M: Jes Sorensen <jes@sgi.com> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index de2293d23d5..649918609cb 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -565,39 +565,6 @@ config BFIN_MAC_USE_HWSTAMP help To support the IEEE 1588 Precision Time Protocol (PTP), select y here -config SMC9194 - tristate "SMC 9194 support" - depends on NET_VENDOR_SMC && (ISA || MAC && BROKEN) - select CRC32 - ---help--- - This is support for the SMC9xxx based Ethernet cards. Choose this - option if you have a DELL laptop with the docking station, or - another SMC9192/9194 based chipset. Say Y if you want it compiled - into the kernel, and read the file - <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here. The module - will be called smc9194. - -config SMC91X - tristate "SMC 91C9x/91C1xxx support" - select CRC32 - select MII - depends on ARM || M32R || SUPERH || \ - MIPS || BLACKFIN || MN10300 || COLDFIRE - help - This is a driver for SMC's 91x series of Ethernet chipsets, - including the SMC91C94 and the SMC91C111. Say Y if you want it - compiled into the kernel, and read the file - <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - This driver is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module will be called smc91x. If you want to compile it as a - module, say M here and read <file:Documentation/kbuild/modules.txt>. - config PXA168_ETH tristate "Marvell pxa168 ethernet support" depends on CPU_PXA168 @@ -712,44 +679,6 @@ config GRETH help Say Y here if you want to use the Aeroflex Gaisler GRETH Ethernet MAC. -config SMC911X - tristate "SMSC LAN911[5678] support" - select CRC32 - select MII - depends on ARM || SUPERH || MN10300 - help - This is a driver for SMSC's LAN911x series of Ethernet chipsets - including the new LAN9115, LAN9116, LAN9117, and LAN9118. - Say Y if you want it compiled into the kernel, - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - This driver is also available as a module. The module will be - called smc911x. If you want to compile it as a module, say M - here and read <file:Documentation/kbuild/modules.txt> - -config SMSC911X - tristate "SMSC LAN911x/LAN921x families embedded ethernet support" - depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300 - select CRC32 - select MII - select PHYLIB - ---help--- - Say Y here if you want support for SMSC LAN911x and LAN921x families - of ethernet controllers. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module - will be called smsc911x. - -config SMSC911X_ARCH_HOOKS - def_bool n - depends on SMSC911X - help - If the arch enables this, it allows the arch to implement various - hooks for more comprehensive interrupt control and also to override - the source of the MAC address. - config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on ISA @@ -1148,33 +1077,6 @@ config SIS900 To compile this driver as a module, choose M here: the module will be called sis900. This is recommended. -config EPIC100 - tristate "SMC EtherPower II" - depends on NET_PCI && PCI - select CRC32 - select MII - help - This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, - which is based on the SMC83c17x (EPIC/100). - More specific information and updates are available from - <http://www.scyld.com/network/epic100.html>. - -config SMSC9420 - tristate "SMSC LAN9420 PCI ethernet adapter support" - depends on NET_PCI && PCI - select CRC32 - select PHYLIB - select SMSC_PHY - help - This is a driver for SMSC's LAN9420 PCI ethernet adapter. - Say Y if you want it compiled into the kernel, - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - This driver is also available as a module. The module will be - called smsc9420. If you want to compile it as a module, say M - here and read <file:Documentation/kbuild/modules.txt> - config SUNDANCE tristate "Sundance Alta support" depends on NET_PCI && PCI @@ -1891,13 +1793,6 @@ config MYRI10GE_DCA driver. DCA is a method for warming the CPU cache before data is used, with the intent of lessening the impact of cache misses. -config NETXEN_NIC - tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC" - depends on PCI - select FW_LOADER - help - This enables the support for NetXen's Gigabit Ethernet card. - config NIU tristate "Sun Neptune 10Gbit Ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a58a9f0b799..e74b4244ee7 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -55,8 +55,6 @@ obj-$(CONFIG_MACE) += mace.o obj-$(CONFIG_BMAC) += bmac.o obj-$(CONFIG_TLAN) += tlan.o -obj-$(CONFIG_EPIC100) += epic100.o -obj-$(CONFIG_SMSC9420) += smsc9420.o obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_R6040) += r6040.o @@ -95,7 +93,6 @@ obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o obj-$(CONFIG_HP100) += hp100.o -obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) @@ -182,9 +179,6 @@ obj-$(CONFIG_IBMVETH) += ibmveth.o obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_VXGE) += vxge/ obj-$(CONFIG_MYRI10GE) += myri10ge/ -obj-$(CONFIG_SMC91X) += smc91x.o -obj-$(CONFIG_SMC911X) += smc911x.o -obj-$(CONFIG_SMSC911X) += smsc911x.o obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o @@ -231,7 +225,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o obj-$(CONFIG_FS_ENET) += fs_enet/ -obj-$(CONFIG_NETXEN_NIC) += netxen/ obj-$(CONFIG_NIU) += niu.o obj-$(CONFIG_VIRTIO_NET) += virtio_net.o obj-$(CONFIG_SFC) += sfc/ diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig index 5cd53f1b84d..f1b9bddc155 100644 --- a/drivers/net/ethernet/8390/Kconfig +++ b/drivers/net/ethernet/8390/Kconfig @@ -264,22 +264,9 @@ config STNIC If unsure, say N. -config NET_VENDOR_SMC - bool "Western Digital/SMC cards" - depends on (ISA || MCA || EISA || MAC) - ---help--- - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about Western Digital cards. If you say Y, you will be - asked for your specific card in the following questions. - config ULTRAMCA tristate "SMC Ultra MCA support" - depends on NET_VENDOR_SMC && MCA + depends on MCA select CRC32 ---help--- If you have a network (Ethernet) card of this type and are running @@ -291,7 +278,7 @@ config ULTRAMCA config ULTRA tristate "SMC Ultra support" - depends on NET_VENDOR_SMC && ISA + depends on ISA select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read @@ -310,7 +297,7 @@ config ULTRA config ULTRA32 tristate "SMC Ultra32 EISA support" - depends on NET_VENDOR_SMC && EISA + depends on EISA select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read @@ -322,7 +309,7 @@ config ULTRA32 config WD80x3 tristate "WD80*3 support" - depends on NET_VENDOR_SMC && ISA + depends on ISA select CRC32 ---help--- If you have a network (Ethernet) card of this type, say Y and read diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index ab591bb9670..ed5836ccb8d 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -18,5 +18,6 @@ source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" +source "drivers/net/ethernet/smsc/Kconfig" endif # ETHERNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index d8cf120e332..983fd275215 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ +obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ diff --git a/drivers/net/ethernet/smsc/Kconfig b/drivers/net/ethernet/smsc/Kconfig new file mode 100644 index 00000000000..702efe686c4 --- /dev/null +++ b/drivers/net/ethernet/smsc/Kconfig @@ -0,0 +1,131 @@ +# +# Western Digital/SMC network device configuration +# + +config NET_VENDOR_SMSC + bool "SMC (SMSC)/Western Digital devices" + depends on ARM || ISA || MAC || ARM || MIPS || M32R || SUPERH || \ + BLACKFIN || MN10300 || COLDFIRE || PCI || PCMCIA + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about SMC/Western Digital cards. If you say Y, you will + be asked for your specific card in the following questions. + +if NET_VENDOR_SMSC + +config SMC9194 + tristate "SMC 9194 support" + depends on (ISA || MAC && BROKEN) + select CRC32 + ---help--- + This is support for the SMC9xxx based Ethernet cards. Choose this + option if you have a DELL laptop with the docking station, or + another SMC9192/9194 based chipset. Say Y if you want it compiled + into the kernel, and read the file + <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called smc9194. + +config SMC91X + tristate "SMC 91C9x/91C1xxx support" + select CRC32 + select MII + depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \ + MN10300 || COLDFIRE) + ---help--- + This is a driver for SMC's 91x series of Ethernet chipsets, + including the SMC91C94 and the SMC91C111. Say Y if you want it + compiled into the kernel, and read the file + <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + This driver is also available as a module ( = code which can be + inserted in and removed from the running kernel whenever you want). + The module will be called smc91x. If you want to compile it as a + module, say M here and read <file:Documentation/kbuild/modules.txt>. + +config PCMCIA_SMC91C92 + tristate "SMC 91Cxx PCMCIA support" + depends on PCMCIA + select CRC32 + select MII + ---help--- + Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA + (PC-card) Ethernet or Fast Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called smc91c92_cs. If unsure, say N. + +config EPIC100 + tristate "SMC EtherPower II" + depends on PCI + select CRC32 + select MII + ---help--- + This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC, + which is based on the SMC83c17x (EPIC/100). + More specific information and updates are available from + <http://www.scyld.com/network/epic100.html>. + +config SMC911X + tristate "SMSC LAN911[5678] support" + select CRC32 + select MII + depends on (ARM || SUPERH || MN10300) + ---help--- + This is a driver for SMSC's LAN911x series of Ethernet chipsets + including the new LAN9115, LAN9116, LAN9117, and LAN9118. + Say Y if you want it compiled into the kernel, + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + This driver is also available as a module. The module will be + called smc911x. If you want to compile it as a module, say M + here and read <file:Documentation/kbuild/modules.txt> + +config SMSC911X + tristate "SMSC LAN911x/LAN921x families embedded ethernet support" + depends on (ARM || SUPERH || BLACKFIN || MIPS || MN10300) + select CRC32 + select MII + select PHYLIB + ---help--- + Say Y here if you want support for SMSC LAN911x and LAN921x families + of ethernet controllers. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module + will be called smsc911x. + +config SMSC911X_ARCH_HOOKS + def_bool n + depends on SMSC911X + ---help--- + If the arch enables this, it allows the arch to implement various + hooks for more comprehensive interrupt control and also to override + the source of the MAC address. + +config SMSC9420 + tristate "SMSC LAN9420 PCI ethernet adapter support" + depends on PCI + select CRC32 + select PHYLIB + select SMSC_PHY + ---help--- + This is a driver for SMSC's LAN9420 PCI ethernet adapter. + Say Y if you want it compiled into the kernel, + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + This driver is also available as a module. The module will be + called smsc9420. If you want to compile it as a module, say M + here and read <file:Documentation/kbuild/modules.txt> + +endif # NET_VENDOR_SMSC diff --git a/drivers/net/ethernet/smsc/Makefile b/drivers/net/ethernet/smsc/Makefile new file mode 100644 index 00000000000..f3438dec9d9 --- /dev/null +++ b/drivers/net/ethernet/smsc/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the SMSC network device drivers. +# + +obj-$(CONFIG_SMC9194) += smc9194.o +obj-$(CONFIG_SMC91X) += smc91x.o +obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o +obj-$(CONFIG_EPIC100) += epic100.o +obj-$(CONFIG_SMSC9420) += smsc9420.o +obj-$(CONFIG_SMC911X) += smc911x.o +obj-$(CONFIG_SMSC911X) += smsc911x.o diff --git a/drivers/net/epic100.c b/drivers/net/ethernet/smsc/epic100.c index 814c187d5f9..814c187d5f9 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/ethernet/smsc/epic100.c diff --git a/drivers/net/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c index a91fe172302..a91fe172302 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/ethernet/smsc/smc911x.c diff --git a/drivers/net/smc911x.h b/drivers/net/ethernet/smsc/smc911x.h index 3269292efec..3269292efec 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/ethernet/smsc/smc911x.h diff --git a/drivers/net/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c index 5b65ac4b3ce..5b65ac4b3ce 100644 --- a/drivers/net/smc9194.c +++ b/drivers/net/ethernet/smsc/smc9194.c diff --git a/drivers/net/smc9194.h b/drivers/net/ethernet/smsc/smc9194.h index cf69d0a5a1c..cf69d0a5a1c 100644 --- a/drivers/net/smc9194.h +++ b/drivers/net/ethernet/smsc/smc9194.h diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/ethernet/smsc/smc91c92_cs.c index cffbc0373fa..cffbc0373fa 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/ethernet/smsc/smc91c92_cs.c diff --git a/drivers/net/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 2b1d254d59a..2b1d254d59a 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c diff --git a/drivers/net/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h index 5f53fbbf67b..5f53fbbf67b 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/ethernet/smsc/smc91x.h diff --git a/drivers/net/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 75c08a55582..75c08a55582 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c diff --git a/drivers/net/smsc911x.h b/drivers/net/ethernet/smsc/smsc911x.h index 8d67aacf886..8d67aacf886 100644 --- a/drivers/net/smsc911x.h +++ b/drivers/net/ethernet/smsc/smsc911x.h diff --git a/drivers/net/smsc9420.c b/drivers/net/ethernet/smsc/smsc9420.c index 459726f5475..459726f5475 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/ethernet/smsc/smsc9420.c diff --git a/drivers/net/smsc9420.h b/drivers/net/ethernet/smsc/smsc9420.h index e441402f77a..e441402f77a 100644 --- a/drivers/net/smsc9420.h +++ b/drivers/net/ethernet/smsc/smsc9420.h diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig index 72aa25786a9..f5a738ff59f 100644 --- a/drivers/net/pcmcia/Kconfig +++ b/drivers/net/pcmcia/Kconfig @@ -31,17 +31,6 @@ config PCMCIA_FMVJ18X To compile this driver as a module, choose M here: the module will be called fmvj18x_cs. If unsure, say N. -config PCMCIA_SMC91C92 - tristate "SMC 91Cxx PCMCIA support" - select CRC32 - select MII - help - Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA - (PC-card) Ethernet or Fast Ethernet card to your computer. - - To compile this driver as a module, choose M here: the module will be - called smc91c92_cs. If unsure, say N. - config PCMCIA_XIRC2PS tristate "Xircom 16-bit PCMCIA support" help diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile index c2b8b44c7bb..f9c98836d75 100644 --- a/drivers/net/pcmcia/Makefile +++ b/drivers/net/pcmcia/Makefile @@ -4,7 +4,6 @@ # 16-bit client drivers obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o -obj-$(CONFIG_PCMCIA_SMC91C92) += smc91c92_cs.o obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o |