summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/extcon/extcon-arizona.c159
-rw-r--r--include/linux/mfd/arizona/pdata.h3
2 files changed, 150 insertions, 12 deletions
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index dab4584a4ad..ba9525ee470 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -55,6 +55,9 @@ struct arizona_extcon_info {
bool hpdet_active;
+ int num_hpdet_res;
+ unsigned int hpdet_res[2];
+
bool mic;
bool detecting;
int jack_flips;
@@ -65,8 +68,8 @@ struct arizona_extcon_info {
};
static const struct arizona_micd_config micd_default_modes[] = {
- { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
{ 0, 2 << ARIZONA_MICD_BIAS_SRC_SHIFT, 1 },
+ { ARIZONA_ACCDET_SRC, 1 << ARIZONA_MICD_BIAS_SRC_SHIFT, 0 },
};
static struct {
@@ -118,10 +121,6 @@ static void arizona_start_mic(struct arizona_extcon_info *info)
bool change;
int ret;
- info->detecting = true;
- info->mic = false;
- info->jack_flips = 0;
-
/* Microphone detection can't use idle mode */
pm_runtime_get(info->dev);
@@ -311,12 +310,80 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
return val;
}
+static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading)
+{
+ struct arizona *arizona = info->arizona;
+ int ret;
+
+ /*
+ * If we're using HPDET for accessory identification we need
+ * to take multiple measurements, step through them in sequence.
+ */
+ if (arizona->pdata.hpdet_acc_id) {
+ info->hpdet_res[info->num_hpdet_res++] = *reading;
+
+ /*
+ * If the impedence is too high don't measure the
+ * second ground.
+ */
+ if (info->num_hpdet_res == 1 && *reading >= 45) {
+ dev_dbg(arizona->dev, "Skipping ground flip\n");
+ info->hpdet_res[info->num_hpdet_res++] = *reading;
+ }
+
+ if (info->num_hpdet_res == 1) {
+ dev_dbg(arizona->dev, "Flipping ground\n");
+
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_SRC,
+ ~info->micd_modes[0].src);
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_POLL, 0);
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+ return -EAGAIN;
+ }
+
+ /* OK, got both. Now, compare... */
+ dev_dbg(arizona->dev, "HPDET measured %d %d\n",
+ info->hpdet_res[0], info->hpdet_res[1]);
+
+ if (info->hpdet_res[0] > info->hpdet_res[1] * 2) {
+ dev_dbg(arizona->dev, "Detected mic\n");
+ info->mic = true;
+ ret = extcon_set_cable_state_(&info->edev,
+ ARIZONA_CABLE_MICROPHONE,
+ true);
+ if (ret != 0) {
+ dev_err(arizona->dev,
+ "Failed to report mic: %d\n", ret);
+ }
+
+ /* Take the headphone impedance for the main report */
+ *reading = info->hpdet_res[1];
+ } else {
+ dev_dbg(arizona->dev, "Detected headphone\n");
+ }
+
+ /* Make sure everything is reset back to the real polarity */
+ regmap_update_bits(arizona->regmap,
+ ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_SRC,
+ info->micd_modes[0].src);
+ }
+
+ return 0;
+}
+
static irqreturn_t arizona_hpdet_irq(int irq, void *data)
{
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int report = ARIZONA_CABLE_HEADPHONE;
- int ret;
+ int ret, reading;
mutex_lock(&info->lock);
@@ -344,14 +411,23 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
} else if (ret < 0) {
goto done;
}
+ reading = ret;
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_IMPEDANCE_RANGE_MASK, 0);
+ ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL,
+ 0);
+
+ ret = arizona_hpdet_do_id(info, &reading);
+ if (ret == -EAGAIN) {
+ goto out;
+ } else if (ret < 0) {
+ goto done;
+ }
/* Report high impedence cables as line outputs */
- if (ret >= 5000)
+ if (reading >= 5000)
report = ARIZONA_CABLE_LINEOUT;
else
report = ARIZONA_CABLE_HEADPHONE;
@@ -370,8 +446,6 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
dev_warn(arizona->dev, "Failed to undo magic: %d\n", ret);
done:
- regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
- ARIZONA_HP_POLL, 0);
/* Revert back to MICDET mode */
regmap_update_bits(arizona->regmap,
@@ -451,8 +525,58 @@ err:
info->hpdet_active = false;
}
+
+static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
+{
+ struct arizona *arizona = info->arizona;
+ int ret;
+
+ dev_dbg(arizona->dev, "Starting identification via HPDET\n");
+
+ /* Make sure we keep the device enabled during the measurement */
+ pm_runtime_get(info->dev);
+
+ info->hpdet_active = true;
+
+ ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
+
+ ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
+
+ ret = regmap_update_bits(arizona->regmap,
+ ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
+ info->micd_modes[0].src |
+ ARIZONA_ACCDET_MODE_HPL);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+ goto err;
}
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1,
+ ARIZONA_HP_POLL, ARIZONA_HP_POLL);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n",
+ ret);
+ goto err;
+ }
+
+ return;
+
+err:
+ regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1,
+ ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
+
+ /* Just report headphone */
+ ret = extcon_update_state(&info->edev,
+ 1 << ARIZONA_CABLE_HEADPHONE,
+ 1 << ARIZONA_CABLE_HEADPHONE);
+ if (ret != 0)
+ dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
+
info->hpdet_active = false;
}
@@ -612,12 +736,24 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
dev_err(arizona->dev, "Mechanical report failed: %d\n",
ret);
- arizona_start_mic(info);
+ if (!arizona->pdata.hpdet_acc_id) {
+ info->detecting = true;
+ info->mic = false;
+ info->jack_flips = 0;
+
+ arizona_start_mic(info);
+ } else {
+ arizona_start_hpdet_acc_id(info);
+ }
} else {
dev_dbg(arizona->dev, "Detected jack removal\n");
arizona_stop_mic(info);
+ info->num_hpdet_res = 0;
+ for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++)
+ info->hpdet_res[i] = 0;
+ info->mic = false;
for (i = 0; i < ARIZONA_NUM_BUTTONS; i++)
input_report_key(info->input,
@@ -665,7 +801,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
mutex_init(&info->lock);
info->arizona = arizona;
info->dev = &pdev->dev;
- info->detecting = true;
platform_set_drvdata(pdev, info);
switch (arizona->type) {
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 0fc26a480be..7c087877835 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -99,6 +99,9 @@ struct arizona_pdata {
/** GPIO5 is used for jack detection */
bool jd_gpio5;
+ /** Use the headphone detect circuit to identify the accessory */
+ bool hpdet_acc_id;
+
/** GPIO for mic detection polarity */
int micd_pol_gpio;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-14 18:04:59 +0000