diff options
39 files changed, 1559 insertions, 2002 deletions
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt index 96f155e6875..059934363ca 100644 --- a/Documentation/pcmcia/driver-changes.txt +++ b/Documentation/pcmcia/driver-changes.txt @@ -1,5 +1,11 @@ This file details changes in 2.6 which affect PCMCIA card driver authors: +* New configuration loop helper (as of 2.6.28) + By calling pcmcia_loop_config(), a driver can iterate over all available + configuration options. During a driver's probe() phase, one doesn't need + to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and + pcmcia_parse_tuple directly in most if not all cases. + * New release helper (as of 2.6.17) Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's necessary now is calling pcmcia_disable_device. As there is no valid diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 41b4361bbf6..02b596b9cf6 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -148,6 +148,64 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) + +struct pcmcia_config_check { + unsigned long ctl_base; + int skip_vcc; + int is_kme; +}; + +static int pcmcia_check_one_config(struct pcmcia_device *pdev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + struct pcmcia_config_check *stk = priv_data; + + /* Check for matching Vcc, unless we're desperate */ + if (!stk->skip_vcc) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort1 + 0x0e; + } else + return -ENODEV; + /* If we've got this far, we're done */ + return 0; + } + return -ENODEV; +} + /** * pcmcia_init_one - attach a PCMCIA interface * @pdev: pcmcia device @@ -161,19 +219,11 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_host *host; struct ata_port *ap; struct ata_pcmcia_info *info; - tuple_t tuple; - struct { - unsigned short buf[128]; - cisparse_t parse; - config_info_t conf; - cistpl_cftable_entry_t dflt; - } *stk = NULL; - cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; + struct pcmcia_config_check *stk = NULL; + int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; int n_ports = 1; - struct ata_port_operations *ops = &pcmcia_port_ops; info = kzalloc(sizeof(*info), GFP_KERNEL); @@ -193,96 +243,27 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) pdev->conf.Attributes = CONF_ENABLE_IRQ; pdev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate resoure probing structures */ - - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto out1; - - cfg = &stk->parse.cftable_entry; - - /* Tuples we are walking */ - tuple.TupleData = (cisdata_t *)&stk->buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ is_kme = ((pdev->manf_id == MANFID_KME) && ((pdev->card_id == PRODID_KME_KXLC005_A) || (pdev->card_id == PRODID_KME_KXLC005_B))); - /* Not sure if this is right... look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf)); -/* link->conf.Vcc = stk->conf.Vcc; */ - - pass = io_base = ctl_base = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); - - /* Now munch the resources looking for a suitable set */ - while (1) { - if (pcmcia_get_tuple_data(pdev, &tuple) != 0) - goto next_entry; - if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0) - goto next_entry; - /* Check for matching Vcc, unless we're desperate */ - if (!pass) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } - } + /* Allocate resoure probing structures */ - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; - pdev->conf.ConfigIndex = cfg->index; - pdev->io.BasePort1 = io->win[0].base; - pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - pdev->io.NumPorts1 = 8; - pdev->io.BasePort2 = io->win[1].base; - pdev->io.NumPorts2 = (is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - goto next_entry; - io_base = pdev->io.BasePort1; - ctl_base = pdev->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->io.NumPorts1 = io->win[0].len; - pdev->io.NumPorts2 = 0; - if (pcmcia_request_io(pdev, &pdev->io) != 0) - goto next_entry; - io_base = pdev->io.BasePort1; - ctl_base = pdev->io.BasePort1 + 0x0e; - } else - goto next_entry; - /* If we've got this far, we're done */ - break; - } -next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); - if (pass) { - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple)); - } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) { - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple)); - memset(&stk->dflt, 0, sizeof(stk->dflt)); - pass++; - } - } + stk = kzalloc(sizeof(*stk), GFP_KERNEL); + if (!stk) + goto out1; + stk->is_kme = is_kme; + stk->skip_vcc = io_base = ctl_base = 0; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) { + stk->skip_vcc = 1; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) + goto failed; /* No suitable config found */ + } + io_base = pdev->io.BasePort1; + ctl_base = stk->ctl_base; CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf)); @@ -384,6 +365,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), @@ -404,9 +386,9 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591), PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728), PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e), - PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae), PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178), + PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420), PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178), PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753), PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e), diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 593b7c59503..3fd8022a635 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -678,93 +678,70 @@ static void bt3c_detach(struct pcmcia_device *link) kfree(info); } -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) +static int bt3c_check_config(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i; - - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - return get_tuple(handle, tuple, parse); + unsigned long try = (unsigned long) priv_data; + + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && + (cf->io.win[0].base != 0)) { + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = (try == 0) ? 16 : + cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; } -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) +static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - return get_tuple(handle, tuple, parse); + static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + for (j = 0; j < 5; j++) { + p_dev->io.BasePort1 = base[j]; + p_dev->io.IOAddrLines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; } static int bt3c_config(struct pcmcia_device *link) { - static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; bt3c_info_t *info = link->priv; - tuple_t tuple; - u_short buf[256]; - cisparse_t parse; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; - int i, j, try; - - /* First pass: look for a config entry that looks normal. */ - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Two tries: without IO aliases, then with aliases */ - for (try = 0; try < 2; try++) { - i = first_tuple(link, &tuple, &parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } -next_entry: - i = next_tuple(link, &tuple, &parse); - } - } + int i; + unsigned long try; + + /* First pass: look for a config entry that looks normal. + Two tries: without IO aliases, then with aliases */ + for (try = 0; try < 2; try++) + if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try)) + goto found_port; /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */ - i = first_tuple(link, &tuple, &parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - link->conf.ConfigIndex = cf->index; - for (j = 0; j < 5; j++) { - link->io.BasePort1 = base[j]; - link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } - } - i = next_tuple(link, &tuple, &parse); - } + if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL)) + goto found_port; -found_port: - if (i != CS_SUCCESS) { - BT_ERR("No usable port range found"); - cs_error(link, RequestIO, i); - goto failed; - } + BT_ERR("No usable port range found"); + cs_error(link, RequestIO, -ENODEV); + goto failed; +found_port: i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { cs_error(link, RequestIRQ, i); diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 68d1d258e6a..17183125434 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -607,94 +607,70 @@ static void btuart_detach(struct pcmcia_device *link) kfree(info); } -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) +static int btuart_check_config(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i; - - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - return get_tuple(handle, tuple, parse); + int *try = priv_data; + + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && + (cf->io.win[0].base != 0)) { + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = (*try == 0) ? 16 : + cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; } -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) +static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - return get_tuple(handle, tuple, parse); + static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + for (j = 0; j < 5; j++) { + p_dev->io.BasePort1 = base[j]; + p_dev->io.IOAddrLines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; } static int btuart_config(struct pcmcia_device *link) { - static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; btuart_info_t *info = link->priv; - tuple_t tuple; - u_short buf[256]; - cisparse_t parse; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; - int i, j, try; - - /* First pass: look for a config entry that looks normal. */ - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Two tries: without IO aliases, then with aliases */ - for (try = 0; try < 2; try++) { - i = first_tuple(link, &tuple, &parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } -next_entry: - i = next_tuple(link, &tuple, &parse); - } - } + int i; + int try; + + /* First pass: look for a config entry that looks normal. + Two tries: without IO aliases, then with aliases */ + for (try = 0; try < 2; try++) + if (!pcmcia_loop_config(link, btuart_check_config, &try)) + goto found_port; /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */ - i = first_tuple(link, &tuple, &parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin > 0) - && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - link->conf.ConfigIndex = cf->index; - for (j = 0; j < 5; j++) { - link->io.BasePort1 = base[j]; - link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } - } - i = next_tuple(link, &tuple, &parse); - } + if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL)) + goto found_port; -found_port: - if (i != CS_SUCCESS) { - BT_ERR("No usable port range found"); - cs_error(link, RequestIO, i); - goto failed; - } + BT_ERR("No usable port range found"); + cs_error(link, RequestIO, -ENODEV); + goto failed; +found_port: i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { cs_error(link, RequestIRQ, i); diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index dae45cdf02b..ec12560e034 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -590,66 +590,31 @@ static void dtl1_detach(struct pcmcia_device *link) kfree(info); } -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) +static int dtl1_confcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i; - - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - return get_tuple(handle, tuple, parse); -} - -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - return get_tuple(handle, tuple, parse); + if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */ + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; } static int dtl1_config(struct pcmcia_device *link) { dtl1_info_t *info = link->priv; - tuple_t tuple; - u_short buf[256]; - cisparse_t parse; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; int i; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Look for a generic full-sized window */ link->io.NumPorts1 = 8; - i = first_tuple(link, &tuple, &parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.NumPorts1 = cf->io.win[0].len; /*yo */ - link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, &tuple, &parse); - } - - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); + if (!pcmcia_loop_config(link, dtl1_confcheck, NULL)) goto failed; - } i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index f070ae7bd91..1c5bf99895e 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1759,65 +1759,40 @@ static void cmm_cm4000_release(struct pcmcia_device * link) /*==== Interface to PCMCIA Layer =======================================*/ +static int cm4000_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (!cfg->io.nwin) + return -ENODEV; + + /* Get the IOaddr */ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(cfg->io.flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(cfg->io.flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int cm4000_config(struct pcmcia_device * link, int devno) { struct cm4000_dev *dev; - tuple_t tuple; - cisparse_t parse; - u_char buf[64]; - int fail_fn, fail_rc; - int rc; /* read the config-tuples */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - link->io.BasePort2 = 0; - link->io.NumPorts2 = 0; - link->io.Attributes2 = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (rc = pcmcia_get_first_tuple(link, &tuple); - rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) { - - rc = pcmcia_get_tuple_data(link, &tuple); - if (rc != CS_SUCCESS) - continue; - rc = pcmcia_parse_tuple(link, &tuple, &parse); - if (rc != CS_SUCCESS) - continue; - - link->conf.ConfigIndex = parse.cftable_entry.index; - - if (!parse.cftable_entry.io.nwin) - continue; - - /* Get the IOaddr */ - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = parse.cftable_entry.io.flags - & CISTPL_IO_LINES_MASK; - - rc = pcmcia_request_io(link, &link->io); - if (rc == CS_SUCCESS) - break; /* we are done */ - } - if (rc != CS_SUCCESS) + if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; link->conf.IntType = 00000002; - if ((fail_rc = - pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) { - fail_fn = RequestConfiguration; + if (pcmcia_request_configuration(link, &link->conf)) goto cs_release; - } dev = link->priv; sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 0b5934bef7a..e047bac56f0 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -526,65 +526,49 @@ static void cm4040_reader_release(struct pcmcia_device *link) return; } -static int reader_config(struct pcmcia_device *link, int devno) +static int cm4040_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - struct reader_dev *dev; - tuple_t tuple; - cisparse_t parse; - u_char buf[64]; - int fail_fn, fail_rc; int rc; + if (!cfg->io.nwin) + return -ENODEV; + + /* Get the IOaddr */ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(cfg->io.flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(cfg->io.flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; + + rc = pcmcia_request_io(p_dev, &p_dev->io); + dev_printk(KERN_INFO, &handle_to_dev(p_dev), + "pcmcia_request_io returned 0x%x\n", rc); + return rc; +} + - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; +static int reader_config(struct pcmcia_device *link, int devno) +{ + struct reader_dev *dev; + int fail_rc; link->io.BasePort2 = 0; link->io.NumPorts2 = 0; link->io.Attributes2 = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (rc = pcmcia_get_first_tuple(link, &tuple); - rc == CS_SUCCESS; - rc = pcmcia_get_next_tuple(link, &tuple)) { - rc = pcmcia_get_tuple_data(link, &tuple); - if (rc != CS_SUCCESS) - continue; - rc = pcmcia_parse_tuple(link, &tuple, &parse); - if (rc != CS_SUCCESS) - continue; - - link->conf.ConfigIndex = parse.cftable_entry.index; - - if (!parse.cftable_entry.io.nwin) - continue; - - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = parse.cftable_entry.io.flags - & CISTPL_IO_LINES_MASK; - rc = pcmcia_request_io(link, &link->io); - - dev_printk(KERN_INFO, &handle_to_dev(link), "foo"); - if (rc == CS_SUCCESS) - break; - else - dev_printk(KERN_INFO, &handle_to_dev(link), - "pcmcia_request_io failed 0x%x\n", rc); - } - if (rc != CS_SUCCESS) + + if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; link->conf.IntType = 00000002; if ((fail_rc = pcmcia_request_configuration(link,&link->conf)) !=CS_SUCCESS) { - fail_fn = RequestConfiguration; dev_printk(KERN_INFO, &handle_to_dev(link), "pcmcia_request_configuration failed 0x%x\n", fail_rc); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 21bfac13784..fe20cdbd56f 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -220,103 +220,91 @@ out_release: #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +struct pcmcia_config_check { + unsigned long ctl_base; + int skip_vcc; + int is_kme; +}; + +static int pcmcia_check_one_config(struct pcmcia_device *pdev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + struct pcmcia_config_check *stk = priv_data; + + /* Check for matching Vcc, unless we're desperate */ + if (!stk->skip_vcc) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + pdev->conf.ConfigIndex = cfg->index; + pdev->io.BasePort1 = io->win[0].base; + pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (!(io->flags & CISTPL_IO_16BIT)) + pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + if (io->nwin == 2) { + pdev->io.NumPorts1 = 8; + pdev->io.BasePort2 = io->win[1].base; + pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort2; + } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { + pdev->io.NumPorts1 = io->win[0].len; + pdev->io.NumPorts2 = 0; + if (pcmcia_request_io(pdev, &pdev->io) != 0) + return -ENODEV; + stk->ctl_base = pdev->io.BasePort1 + 0x0e; + } else + return -ENODEV; + /* If we've got this far, we're done */ + return 0; + } + return -ENODEV; +} + static int ide_config(struct pcmcia_device *link) { ide_info_t *info = link->priv; - tuple_t tuple; - struct { - u_short buf[128]; - cisparse_t parse; - config_info_t conf; - cistpl_cftable_entry_t dflt; - } *stk = NULL; - cistpl_cftable_entry_t *cfg; - int pass, last_ret = 0, last_fn = 0, is_kme = 0; + struct pcmcia_config_check *stk = NULL; + int last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; struct ide_host *host; DEBUG(0, "ide_config(0x%p)\n", link); - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) goto err_mem; - cfg = &stk->parse.cftable_entry; - - tuple.TupleData = (cisdata_t *)&stk->buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.Attributes = 0; - is_kme = ((link->manf_id == MANFID_KME) && ((link->card_id == PRODID_KME_KXLC005_A) || (link->card_id == PRODID_KME_KXLC005_B))); - /* Not sure if this is right... look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf)); - - pass = io_base = ctl_base = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry; - if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry; - - /* Check for matching Vcc, unless we're desperate */ - if (!pass) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io; - link->conf.ConfigIndex = cfg->index; - link->io.BasePort1 = io->win[0].base; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - if (io->nwin == 2) { - link->io.NumPorts1 = 8; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = (is_kme) ? 2 : 1; - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - io_base = link->io.BasePort1; - ctl_base = link->io.BasePort2; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - link->io.NumPorts1 = io->win[0].len; - link->io.NumPorts2 = 0; - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - io_base = link->io.BasePort1; - ctl_base = link->io.BasePort1 + 0x0e; - } else goto next_entry; - /* If we've got this far, we're done */ - break; - } - - next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - memcpy(&stk->dflt, cfg, sizeof(stk->dflt)); - if (pass) { - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } else if (pcmcia_get_next_tuple(link, &tuple) != 0) { - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - memset(&stk->dflt, 0, sizeof(stk->dflt)); - pass++; - } + stk = kzalloc(sizeof(*stk), GFP_KERNEL); + if (!stk) + goto err_mem; + stk->is_kme = is_kme; + stk->skip_vcc = io_base = ctl_base = 0; + + if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) { + stk->skip_vcc = 1; + if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) + goto failed; /* No suitable config found */ } + io_base = link->io.BasePort1; + ctl_base = stk->ctl_base; CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); @@ -404,8 +392,10 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */ PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), + PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ + PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index a5b941c327f..38804653970 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -154,78 +154,45 @@ static void avmcs_detach(struct pcmcia_device *link) ======================================================================*/ -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) +static int avmcs_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) return i; - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_first_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); -} - -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); + if (cf->io.nwin <= 0) + return -ENODEV; + + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.NumPorts1 = cf->io.win[0].len; + p_dev->io.NumPorts2 = 0; + printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n", + p_dev->io.BasePort1, + p_dev->io.BasePort1+p_dev->io.NumPorts1-1); + return pcmcia_request_io(p_dev, &p_dev->io); } static int avmcs_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; local_info_t *dev; int i; - u_char buf[64]; char devname[128]; int cardtype; int (*addcard)(unsigned int port, unsigned irq); dev = link->priv; - do { - devname[0] = 0; - if (link->prod_id[1]) - strlcpy(devname, link->prod_id[1], sizeof(devname)); - - /* - * find IO port - */ - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - i = first_tuple(link, &tuple, &parse); - while (i == CS_SUCCESS) { - if (cf->io.nwin > 0) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.NumPorts1 = cf->io.win[0].len; - link->io.NumPorts2 = 0; - printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n", - link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1-1); - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) goto found_port; - } - i = next_tuple(link, &tuple, &parse); - } + devname[0] = 0; + if (link->prod_id[1]) + strlcpy(devname, link->prod_id[1], sizeof(devname)); -found_port: - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); - break; - } + /* + * find IO port + */ + if (pcmcia_loop_config(link, avmcs_configcheck, NULL)) + return -ENODEV; + do { /* * allocate an interrupt line */ diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index fc6cc2c065b..8fd3ca0fb93 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -174,38 +174,29 @@ static void avma1cs_detach(struct pcmcia_device *link) ======================================================================*/ -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) +static int avma1cs_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) return i; - return pcmcia_parse_tuple(handle, tuple, parse); + if (cf->io.nwin <= 0) + return -ENODEV; + + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.NumPorts1 = cf->io.win[0].len; + p_dev->io.NumPorts2 = 0; + printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n", + p_dev->io.BasePort1, + p_dev->io.BasePort1+p_dev->io.NumPorts1-1); + return pcmcia_request_io(p_dev, &p_dev->io); } -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_first_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); -} - -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); -} static int avma1cs_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; local_info_t *dev; int i; - u_char buf[64]; char devname[128]; IsdnCard_t icard; int busy = 0; @@ -214,40 +205,14 @@ static int avma1cs_config(struct pcmcia_device *link) DEBUG(0, "avma1cs_config(0x%p)\n", link); - do { - devname[0] = 0; - if (link->prod_id[1]) - strlcpy(devname, link->prod_id[1], sizeof(devname)); + devname[0] = 0; + if (link->prod_id[1]) + strlcpy(devname, link->prod_id[1], sizeof(devname)); - /* - * find IO port - */ - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - i = first_tuple(link, &tuple, &parse); - while (i == CS_SUCCESS) { - if (cf->io.nwin > 0) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.NumPorts1 = cf->io.win[0].len; - link->io.NumPorts2 = 0; - printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n", - link->io.BasePort1, - link->io.BasePort1+link->io.NumPorts1 - 1); - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) goto found_port; - } - i = next_tuple(link, &tuple, &parse); - } + if (pcmcia_loop_config(link, avma1cs_configcheck, NULL)) + return -ENODEV; -found_port: - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); - break; - } - + do { /* * allocate an interrupt line */ diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index db7e64424af..2bf0016dea5 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -203,68 +203,41 @@ static void elsa_cs_detach(struct pcmcia_device *link) device available to the system. ======================================================================*/ -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) return i; - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_first_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); -} -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) +static int elsa_cs_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); + int j; + + if ((cf->io.nwin > 0) && cf->io.win[0].base) { + printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); + p_dev->io.BasePort1 = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } else { + printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n"); + for (j = 0x2f0; j > 0x100; j -= 0x10) { + p_dev->io.BasePort1 = j; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; } static int elsa_cs_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; local_info_t *dev; - int i, j, last_fn; - u_short buf[128]; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; + int i, last_fn; IsdnCard_t icard; DEBUG(0, "elsa_config(0x%p)\n", link); dev = link->priv; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - i = first_tuple(link, &tuple, &parse); - while (i == CS_SUCCESS) { - if ( (cf->io.nwin > 0) && cf->io.win[0].base) { - printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } else { - printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n"); - link->conf.ConfigIndex = cf->index; - for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) { - link->io.BasePort1 = j; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - break; - } - i = next_tuple(link, &tuple, &parse); - } - + i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL); if (i != CS_SUCCESS) { last_fn = RequestIO; goto cs_failed; diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index 439cb530def..9a3c9f5e4fe 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -217,101 +217,61 @@ static void sedlbauer_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -static int sedlbauer_config(struct pcmcia_device *link) +static int sedlbauer_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_fn, last_ret; - u8 buf[64]; - config_info_t conf; - win_req_t req; - memreq_t map; - IsdnCard_t icard; - - DEBUG(0, "sedlbauer_config(0x%p)\n", link); - - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; + win_req_t *req = priv_data; - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); + if (cfg->index == 0) + return -ENODEV; - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - if (cfg->index == 0) goto next_entry; - link->conf.ConfigIndex = cfg->index; - /* Does this card need audio output? */ if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; } - + /* Use power settings for Vcc and Vpp if present */ /* Note that the CIS values need to be rescaled */ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - goto next_entry; - } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) - goto next_entry; + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) + return -ENODEV; + } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) + return -ENODEV; } - + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; -/* new in dummy.cs 2001/01/28 MN - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; -*/ - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; } /* @@ -325,30 +285,54 @@ static int sedlbauer_config(struct pcmcia_device *link) needs to be mapped to virtual space with ioremap() before it is used. */ - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; -/* new in dummy.cs 2001/01/28 MN - if (req.Size < 0x1000) - req.Size = 0x1000; -*/ - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) - goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) - goto next_entry; + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + memreq_t map; + req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + req->Attributes |= WIN_ENABLE; + req->Base = mem->win[0].host_addr; + req->Size = mem->win[0].len; + req->AccessSpeed = 0; + if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0) + return -ENODEV; + map.Page = 0; + map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(p_dev->win, &map) != 0) + return -ENODEV; } - /* If we got this far, we're cool! */ - break; + return 0; +} - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } + + +static int sedlbauer_config(struct pcmcia_device *link) +{ + local_info_t *dev = link->priv; + win_req_t *req; + int last_fn, last_ret; + IsdnCard_t icard; + + DEBUG(0, "sedlbauer_config(0x%p)\n", link); + + req = kzalloc(sizeof(win_req_t), GFP_KERNEL); + if (!req) + return -ENOMEM; + + /* + In this loop, we scan the CIS for configuration table entries, + each of which describes a valid card configuration, including + voltage, IO window, memory window, and interrupt settings. + + We make no assumptions about the card to be configured: we use + just the information available in the CIS. In an ideal world, + this would work for any PCMCIA card, but it requires a complete + and accurate CIS. In practice, a driver usually "knows" most of + these things without consulting the CIS, and most client drivers + will only use the CIS to fill in implementation-defined details. + */ + last_ret = pcmcia_loop_config(link, sedlbauer_config_check, req); + if (last_ret) + goto failed; /* Allocate an interrupt line. Note that this does not assign a @@ -387,8 +371,8 @@ static int sedlbauer_config(struct pcmcia_device *link) printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1); if (link->win) - printk(", mem 0x%06lx-0x%06lx", req.Base, - req.Base+req.Size-1); + printk(", mem 0x%06lx-0x%06lx", req->Base, + req->Base+req->Size-1); printk("\n"); icard.para[0] = link->irq.AssignedIRQ; @@ -409,6 +393,7 @@ static int sedlbauer_config(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); +failed: sedlbauer_release(link); return -ENODEV; diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index ab4bd455450..21cabd0aadb 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -193,68 +193,41 @@ static void teles_detach(struct pcmcia_device *link) device available to the system. ======================================================================*/ -static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) return i; - return pcmcia_parse_tuple(handle, tuple, parse); -} - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i = pcmcia_get_first_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); -} -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) +static int teles_cs_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) return i; - return get_tuple(handle, tuple, parse); + int j; + + if ((cf->io.nwin > 0) && cf->io.win[0].base) { + printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); + p_dev->io.BasePort1 = cf->io.win[0].base; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } else { + printk(KERN_INFO "(teles_cs: looks like the 97 model)\n"); + for (j = 0x2f0; j > 0x100; j -= 0x10) { + p_dev->io.BasePort1 = j; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; } static int teles_cs_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; local_info_t *dev; - int i, j, last_fn; - u_short buf[128]; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; + int i, last_fn; IsdnCard_t icard; DEBUG(0, "teles_config(0x%p)\n", link); dev = link->priv; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; tuple.TupleDataMax = 255; - tuple.Attributes = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - i = first_tuple(link, &tuple, &parse); - while (i == CS_SUCCESS) { - if ( (cf->io.nwin > 0) && cf->io.win[0].base) { - printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } else { - printk(KERN_INFO "(teles_cs: looks like the 97 model)\n"); - link->conf.ConfigIndex = cf->index; - for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) { - link->io.BasePort1 = j; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - break; - } - i = next_tuple(link, &tuple, &parse); - } - + i = pcmcia_loop_config(link, teles_cs_configcheck, NULL); if (i != CS_SUCCESS) { last_fn = RequestIO; goto cs_failed; diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 3f682d49a4e..061d889794c 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -284,58 +284,49 @@ static int try_io_port(struct pcmcia_device *link) } } +static int axnet_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int i; + cistpl_io_t *io = &cfg->io; + + if (cfg->index == 0 || cfg->io.nwin == 0) + return -ENODEV; + + p_dev->conf.ConfigIndex = 0x05; + /* For multifunction cards, by convention, we configure the + network function with window 0, and serial with window 1 */ + if (io->nwin > 1) { + i = (io->win[1].len > io->win[0].len); + p_dev->io.BasePort2 = io->win[1-i].base; + p_dev->io.NumPorts2 = io->win[1-i].len; + } else { + i = p_dev->io.NumPorts2 = 0; + } + p_dev->io.BasePort1 = io->win[i].base; + p_dev->io.NumPorts1 = io->win[i].len; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + return try_io_port(p_dev); + + return -ENODEV; +} + static int axnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; axnet_dev_t *info = PRIV(dev); - tuple_t tuple; - cisparse_t parse; int i, j, last_ret, last_fn; - u_short buf[64]; DECLARE_MAC_BUF(mac); DEBUG(0, "axnet_config(0x%p)\n", link); - tuple.Attributes = 0; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - /* don't trust the CIS on this; Linksys got it wrong */ link->conf.Present = 0x63; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (last_ret == CS_SUCCESS) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_io_t *io = &(parse.cftable_entry.io); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0 || - cfg->index == 0 || cfg->io.nwin == 0) - goto next_entry; - - link->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - link->io.BasePort2 = io->win[1-i].base; - link->io.NumPorts2 = io->win[1-i].len; - } else { - i = link->io.NumPorts2 = 0; - } - link->io.BasePort1 = io->win[i].base; - link->io.NumPorts1 = io->win[i].len; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) { - last_ret = try_io_port(link); - if (last_ret == CS_SUCCESS) break; - } - next_entry: - last_ret = pcmcia_get_next_tuple(link, &tuple); - } + last_ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (last_ret != CS_SUCCESS) { cs_error(link, RequestIO, last_ret); goto failed; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2d4c4ad89b8..aa17434faa0 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -512,58 +512,53 @@ static int try_io_port(struct pcmcia_device *link) } } +static int pcnet_confcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int *has_shmem = priv_data; + int i; + cistpl_io_t *io = &cfg->io; + + if (cfg->index == 0 || cfg->io.nwin == 0) + return -EINVAL; + + /* For multifunction cards, by convention, we configure the + network function with window 0, and serial with window 1 */ + if (io->nwin > 1) { + i = (io->win[1].len > io->win[0].len); + p_dev->io.BasePort2 = io->win[1-i].base; + p_dev->io.NumPorts2 = io->win[1-i].len; + } else { + i = p_dev->io.NumPorts2 = 0; + } + + *has_shmem = ((cfg->mem.nwin == 1) && + (cfg->mem.win[0].len >= 0x4000)); + p_dev->io.BasePort1 = io->win[i].base; + p_dev->io.NumPorts1 = io->win[i].len; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + return try_io_port(p_dev); + + return 0; +} + static int pcnet_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn, start_pg, stop_pg, cm_offset; + int last_ret, last_fn, start_pg, stop_pg, cm_offset; int has_shmem = 0; - u_short buf[64]; hw_info_t *local_hw_info; DECLARE_MAC_BUF(mac); DEBUG(0, "pcnet_config(0x%p)\n", link); - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (last_ret == CS_SUCCESS) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_io_t *io = &(parse.cftable_entry.io); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0 || - cfg->index == 0 || cfg->io.nwin == 0) - goto next_entry; - - link->conf.ConfigIndex = cfg->index; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - link->io.BasePort2 = io->win[1-i].base; - link->io.NumPorts2 = io->win[1-i].len; - } else { - i = link->io.NumPorts2 = 0; - } - has_shmem = ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)); - link->io.BasePort1 = io->win[i].base; - link->io.NumPorts1 = io->win[i].len; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (link->io.NumPorts1 + link->io.NumPorts2 >= 32) { - last_ret = try_io_port(link); - if (last_ret == CS_SUCCESS) break; - } - next_entry: - last_ret = pcmcia_get_next_tuple(link, &tuple); - } - if (last_ret != CS_SUCCESS) { + last_ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem); + if (last_ret) { cs_error(link, RequestIO, last_ret); goto failed; } diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 250eb1954c3..b3f2085ddca 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -459,28 +459,37 @@ static int mhz_3288_power(struct pcmcia_device *link) return 0; } +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int k; + p_dev->io.BasePort2 = cf->io.win[0].base; + for (k = 0; k < 0x400; k += 0x10) { + if (k & 0x80) + continue; + p_dev->io.BasePort1 = k ^ 0x300; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; +} + static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - u_char *buf; win_req_t req; memreq_t mem; - int i, k; + int i; cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); if (!cfg_mem) return CS_OUT_OF_RESOURCE; - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; - link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; link->irq.Attributes = @@ -489,27 +498,9 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; link->io.NumPorts2 = 8; - tuple->Attributes = tuple->TupleOffset = 0; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - - i = first_tuple(link, tuple, parse); /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ - while (i == CS_SUCCESS) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort2 = cf->io.win[0].base; - for (k = 0; k < 0x400; k += 0x10) { - if (k & 0x80) continue; - link->io.BasePort1 = k ^ 0x300; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - if (i == CS_SUCCESS) break; - i = next_tuple(link, tuple, parse); - } - if (i != CS_SUCCESS) + if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) goto free_cfg_mem; dev->base_addr = link->io.BasePort1; @@ -533,7 +524,7 @@ static int mhz_mfc_config(struct pcmcia_device *link) free_cfg_mem: kfree(cfg_mem); - return i; + return -ENODEV; } static int mhz_setup(struct pcmcia_device *link) @@ -660,46 +651,27 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ +static int smc_configcheck(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int smc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; - struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - u_char *buf; int i; - cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return CS_OUT_OF_RESOURCE; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; - - tuple->Attributes = tuple->TupleOffset = 0; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - link->io.NumPorts1 = 16; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if (i == CS_SUCCESS) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - i = next_tuple(link, tuple, parse); - } - if (i == CS_SUCCESS) - dev->base_addr = link->io.BasePort1; + i = pcmcia_loop_config(link, smc_configcheck, NULL); + if (!i) + dev->base_addr = link->io.BasePort1; - kfree(cfg_mem); return i; } diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index f6c4698ce73..d97e6e917c3 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -715,6 +715,47 @@ has_ce2_string(struct pcmcia_device * p_dev) return 0; } +static int +xirc2ps_config_modem(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + unsigned int ioaddr; + + if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->io.BasePort1 = ioaddr; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; +} + +static int +xirc2ps_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int *pass = priv_data; + + if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { + p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->io.BasePort1 = p_dev->io.BasePort2 + + (*pass ? (cf->index & 0x20 ? -24:8) + : (cf->index & 0x20 ? 8:-24)); + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; + +} + /**************** * xirc2ps_config() is scheduled to run after a CARD_INSERTION event * is received, to configure the PCMCIA socket, and to make the @@ -725,13 +766,12 @@ xirc2ps_config(struct pcmcia_device * link) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); + unsigned int ioaddr; tuple_t tuple; cisparse_t parse; - unsigned int ioaddr; int err, i; u_char buf[64]; cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data; - cistpl_cftable_entry_t *cf = &parse.cftable_entry; DECLARE_MAC_BUF(mac); local->dingo_ccr = NULL; @@ -846,19 +886,8 @@ xirc2ps_config(struct pcmcia_device * link) /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ link->io.NumPorts1 = 16; /* no Mako stuff anymore */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)) { - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->conf.ConfigIndex = cf->index ; - link->io.BasePort2 = cf->io.win[0].base; - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) - goto port_found; - } - } - } + if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) + goto port_found; } else { link->io.NumPorts1 = 18; /* We do 2 passes here: The first one uses the regular mapping and @@ -866,21 +895,9 @@ xirc2ps_config(struct pcmcia_device * link) * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ - for (pass=0; pass < 2; pass++) { - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)){ - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8){ - link->conf.ConfigIndex = cf->index ; - link->io.BasePort2 = cf->io.win[0].base; - link->io.BasePort1 = link->io.BasePort2 - + (pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!(err=pcmcia_request_io(link, &link->io))) + for (pass=0; pass < 2; pass++) + if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) goto port_found; - } - } - } /* if special option: * try to configure as Ethernet only. * .... */ diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index f12355398fe..fac1526e49a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -206,126 +206,123 @@ static void airo_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int airo_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + win_req_t *req = priv_data; + + if (cfg->index == 0) + return -ENODEV; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; + + /* + Now set up a common memory window, if needed. There is room + in the struct pcmcia_device structure for one memory window handle, + but if the base addresses need to be saved, or if multiple + windows are needed, the info should go in the private data + structure for this device. + + Note that the memory window base is a physical address, and + needs to be mapped to virtual space with ioremap() before it + is used. + */ + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + memreq_t map; + req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + req->Base = mem->win[0].host_addr; + req->Size = mem->win[0].len; + req->AccessSpeed = 0; + if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0) + return -ENODEV; + map.Page = 0; + map.CardOffset = mem->win[0].card_addr; + if (pcmcia_map_mem_page(p_dev->win, &map) != 0) + return -ENODEV; + } + /* If we got this far, we're cool! */ + return 0; +} + + static int airo_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; local_info_t *dev; + win_req_t *req; int last_fn, last_ret; - u_char buf[64]; - win_req_t req; - memreq_t map; dev = link->priv; DEBUG(0, "airo_config(0x%p)\n", link); + req = kzalloc(sizeof(win_req_t), GFP_KERNEL); + if (!req) + return -ENOMEM; + + /* + * In this loop, we scan the CIS for configuration table + * entries, each of which describes a valid card + * configuration, including voltage, IO window, memory window, + * and interrupt settings. + * + * We make no assumptions about the card to be configured: we + * use just the information available in the CIS. In an ideal + * world, this would work for any PCMCIA card, but it requires + * a complete and accurate CIS. In practice, a driver usually + * "knows" most of these things without consulting the CIS, + * and most client drivers will only use the CIS to fill in + * implementation-defined details. + */ + last_ret = pcmcia_loop_config(link, airo_cs_config_check, req); + if (last_ret) + goto failed; + /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. + Allocate an interrupt line. Note that this does not assign a + handler to the interrupt, unless the 'Handler' member of the + irq structure is initialized. */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - if (cfg->index == 0) goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - - /* - Now set up a common memory window, if needed. There is room - in the struct pcmcia_device structure for one memory window handle, - but if the base addresses need to be saved, or if multiple - windows are needed, the info should go in the private data - structure for this device. - - Note that the memory window base is a physical address, and - needs to be mapped to virtual space with ioremap() before it - is used. - */ - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) - goto next_entry; - map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) - goto next_entry; - } - /* If we got this far, we're cool! */ - break; - - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } - - /* - Allocate an interrupt line. Note that this does not assign a - handler to the interrupt, unless the 'Handler' member of the - irq structure is initialized. - */ if (link->conf.Attributes & CONF_ENABLE_IRQ) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -362,14 +359,17 @@ static int airo_config(struct pcmcia_device *link) printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1); if (link->win) - printk(", mem 0x%06lx-0x%06lx", req.Base, - req.Base+req.Size-1); + printk(", mem 0x%06lx-0x%06lx", req->Base, + req->Base+req->Size-1); printk("\n"); + kfree(req); return 0; cs_failed: cs_error(link, last_fn, last_ret); + failed: airo_release(link); + kfree(req); return -ENODEV; } /* airo_config */ diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 12617cd0b78..4830d51900a 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -224,13 +224,58 @@ static int card_present(void *arg) return 0; } +static int atmel_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int atmel_config(struct pcmcia_device *link) { - tuple_t tuple; - cisparse_t parse; local_info_t *dev; int last_fn, last_ret; - u_char buf[64]; struct pcmcia_device_id *did; dev = link->priv; @@ -238,11 +283,6 @@ static int atmel_config(struct pcmcia_device *link) DEBUG(0, "atmel_config(0x%p)\n", link); - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - /* In this loop, we scan the CIS for configuration table entries, each of which describes a valid card configuration, including @@ -255,66 +295,8 @@ static int atmel_config(struct pcmcia_device *link) these things without consulting the CIS, and most client drivers will only use the CIS to fill in implementation-defined details. */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - if (cfg->index == 0) goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - - /* If we got this far, we're cool! */ - break; - - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } + if (pcmcia_loop_config(link, atmel_config_check, NULL)) + goto failed; /* Allocate an interrupt line. Note that this does not assign a @@ -360,6 +342,7 @@ static int atmel_config(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); + failed: atmel_release(link); return -ENODEV; } diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 3b4e55cf33c..c768d42d517 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -532,145 +532,118 @@ static void prism2_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -#define CFG_CHECK2(fn, retf) \ -do { int _ret = (retf); \ -if (_ret != 0) { \ - PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \ - cs_error(link, fn, _ret); \ - goto next_entry; \ -} \ -} while (0) - /* run after a CARD_INSERTION event is received to configure the PCMCIA * socket and make the device available to the system */ + +static int prism2_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; + + PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " + "(default 0x%02X)\n", cfg->index, dflt->index); + + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / + 10000 && !ignore_cis_vcc) { + PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" + " this entry\n"); + return -ENODEV; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / + 10000 && !ignore_cis_vcc) { + PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " + "- skipping this entry\n"); + return -ENODEV; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) { + /* At least Compaq WL200 does not have IRQInfo1 set, + * but it does not work without interrupts.. */ + printk(KERN_WARNING "Config has no IRQ info, but trying to " + "enable IRQ anyway..\n"); + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + } + + /* IO window settings */ + PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " + "dflt->io.nwin=%d\n", + cfg->io.nwin, dflt->io.nwin); + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " + "io.base=0x%04x, len=%d\n", io->flags, + io->win[0].base, io->win[0].len); + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & + CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + } + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int prism2_config(struct pcmcia_device *link) { struct net_device *dev; struct hostap_interface *iface; local_info_t *local; int ret = 1; - tuple_t tuple; - cisparse_t *parse; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - cistpl_cftable_entry_t dflt = { 0 }; struct hostap_cs_priv *hw_priv; PDEBUG(DEBUG_FLOW, "prism2_config()\n"); - parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL); hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL); - if (parse == NULL || hw_priv == NULL) { + if (hw_priv == NULL) { ret = -ENOMEM; goto failed; } - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - /* Look for an appropriate configuration table entry in the CIS */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - for (;;) { - cistpl_cftable_entry_t *cfg = &(parse->cftable_entry); - CFG_CHECK2(GetTupleData, - pcmcia_get_tuple_data(link, &tuple)); - CFG_CHECK2(ParseTuple, - pcmcia_parse_tuple(link, &tuple, parse)); - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt.index); - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" - " this entry\n"); - goto next_entry; - } - } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " - "- skipping this entry\n"); - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - else if (!(link->conf.Attributes & CONF_ENABLE_IRQ)) { - /* At least Compaq WL200 does not have IRQInfo1 set, - * but it does not work without interrupts.. */ - printk("Config has no IRQ info, but trying to enable " - "IRQ anyway..\n"); - link->conf.Attributes |= CONF_ENABLE_IRQ; - } - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt.io.nwin=%d\n", - cfg->io.nwin, dflt.io.nwin); - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " - "io.base=0x%04x, len=%d\n", io->flags, - io->win[0].base, io->win[0].len); - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & - CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ - CFG_CHECK2(RequestIO, - pcmcia_request_io(link, &link->io)); - - /* This configuration table entry is OK */ - break; - - next_entry: - CS_CHECK(GetNextTuple, - pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, prism2_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) + printk(KERN_ERR "GetNextTuple(): No matching " + "CIS configuration. Maybe you need the " + "ignore_cis_vcc=1 parameter.\n"); + cs_error(link, RequestIO, last_ret); + goto failed; } /* Need to allocate net_device before requesting IRQ handler */ @@ -738,14 +711,12 @@ static int prism2_config(struct pcmcia_device *link) if (ret == 0 && local->ddev) strcpy(hw_priv->node.dev_name, local->ddev->name); } - kfree(parse); return ret; cs_failed: cs_error(link, last_fn, last_ret); failed: - kfree(parse); kfree(hw_priv); prism2_release((u_long)link); return ret; diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c index 1c216e015f6..c7b57d9d499 100644 --- a/drivers/net/wireless/orinoco_cs.c +++ b/drivers/net/wireless/orinoco_cs.c @@ -164,6 +164,70 @@ static void orinoco_cs_detach(struct pcmcia_device *link) last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \ } while (0) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + goto next_entry; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + } + return 0; + +next_entry: + pcmcia_disable_device(p_dev); + return -ENODEV; +}; + static int orinoco_cs_config(struct pcmcia_device *link) { @@ -172,16 +236,8 @@ orinoco_cs_config(struct pcmcia_device *link) struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - tuple_t tuple; - cisparse_t parse; void __iomem *mem; - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - /* * In this loop, we scan the CIS for configuration table * entries, each of which describes a valid card @@ -196,94 +252,14 @@ orinoco_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_cftable_entry_t dflt = { .index = 0 }; - - if ( (pcmcia_get_tuple_data(link, &tuple) != 0) - || (pcmcia_parse_tuple(link, &tuple, &parse) != 0)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, cfg CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, dflt CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); - if(!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = - (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = - io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = - link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - - - /* If we got this far, we're cool! */ - - break; - - next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret == CS_NO_MORE_ITEMS) { + last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - goto cs_failed; - } + cs_error(link, RequestIO, last_ret); + goto failed; } /* @@ -334,7 +310,6 @@ orinoco_cs_config(struct pcmcia_device *link) "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id, link->irq.AssignedIRQ, link->io.BasePort1, link->io.BasePort1 + link->io.NumPorts1 - 1); - return 0; cs_failed: diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c index 98df9bc7836..d7e9d9c3042 100644 --- a/drivers/net/wireless/spectrum_cs.c +++ b/drivers/net/wireless/spectrum_cs.c @@ -633,6 +633,70 @@ static void spectrum_cs_detach(struct pcmcia_device *link) * device available to the system. */ +static int spectrum_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + goto next_entry; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { + DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); + if (!ignore_cis_vcc) + goto next_entry; + } + } + + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + /* Do we need to allocate an interrupt? */ + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(io->flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(io->flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin > 1) { + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + goto next_entry; + } + return 0; + +next_entry: + pcmcia_disable_device(p_dev); + return -ENODEV; +}; + static int spectrum_cs_config(struct pcmcia_device *link) { @@ -641,16 +705,8 @@ spectrum_cs_config(struct pcmcia_device *link) struct orinoco_pccard *card = priv->card; hermes_t *hw = &priv->hw; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - tuple_t tuple; - cisparse_t parse; void __iomem *mem; - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - /* * In this loop, we scan the CIS for configuration table * entries, each of which describes a valid card @@ -665,94 +721,14 @@ spectrum_cs_config(struct pcmcia_device *link) * and most client drivers will only use the CIS to fill in * implementation-defined details. */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - cistpl_cftable_entry_t dflt = { .index = 0 }; - - if ( (pcmcia_get_tuple_data(link, &tuple) != 0) - || (pcmcia_parse_tuple(link, &tuple, &parse) != 0)) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - if (cfg->index == 0) - goto next_entry; - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "spectrum_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000); - if(!ignore_cis_vcc) - goto next_entry; - } - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = - (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = - IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = - io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin > 1) { - link->io.Attributes2 = - link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - - - /* If we got this far, we're cool! */ - - break; - - next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - if (last_ret == CS_NO_MORE_ITEMS) { + last_ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); + if (last_ret) { + if (!ignore_cis_vcc) printk(KERN_ERR PFX "GetNextTuple(): No matching " "CIS configuration. Maybe you need the " "ignore_cis_vcc=1 parameter.\n"); - goto cs_failed; - } + cs_error(link, RequestIO, last_ret); + goto failed; } /* diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 00e1d9620f7..b1899e9c1f6 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -149,52 +149,44 @@ static void parport_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int parport_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + if (epp_mode) + p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + if (io->nwin == 2) { + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + return -ENODEV; + return 0; + } + return -ENODEV; +} + static int parport_config(struct pcmcia_device *link) { parport_info_t *info = link->priv; - tuple_t tuple; - u_short buf[128]; - cisparse_t parse; - cistpl_cftable_entry_t *cfg = &parse.cftable_entry; - cistpl_cftable_entry_t dflt = { 0 }; struct parport *p; int last_ret, last_fn; - + DEBUG(0, "parport_config(0x%p)\n", link); - - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleOffset = 0; tuple.TupleDataMax = 255; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->conf.ConfigIndex = cfg->index; - if (epp_mode) - link->conf.ConfigIndex |= FORCE_EPP_MODE; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (io->nwin == 2) { - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - /* If we've got this far, we're done */ - break; - } - - next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + + last_ret = pcmcia_loop_config(link, parport_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } - + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index f804b45de24..fe789e0e7ad 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -266,13 +266,13 @@ EXPORT_SYMBOL(pcmcia_write_cis_mem); ======================================================================*/ static void read_cis_cache(struct pcmcia_socket *s, int attr, u_int addr, - u_int len, void *ptr) + size_t len, void *ptr) { struct cis_cache_entry *cis; int ret; if (s->fake_cis) { - if (s->fake_cis_len > addr+len) + if (s->fake_cis_len >= addr+len) memcpy(ptr, s->fake_cis+addr, len); else memset(ptr, 0xff, len); @@ -381,17 +381,17 @@ int verify_cis_cache(struct pcmcia_socket *s) ======================================================================*/ -int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis) +int pcmcia_replace_cis(struct pcmcia_socket *s, + const u8 *data, const size_t len) { - kfree(s->fake_cis); - s->fake_cis = NULL; - if (cis->Length > CISTPL_MAX_CIS_SIZE) + if (len > CISTPL_MAX_CIS_SIZE) return CS_BAD_SIZE; - s->fake_cis = kmalloc(cis->Length, GFP_KERNEL); + kfree(s->fake_cis); + s->fake_cis = kmalloc(len, GFP_KERNEL); if (s->fake_cis == NULL) return CS_OUT_OF_RESOURCE; - s->fake_cis_len = cis->Length; - memcpy(s->fake_cis, cis->Data, cis->Length); + s->fake_cis_len = len; + memcpy(s->fake_cis, data, len); return CS_SUCCESS; } EXPORT_SYMBOL(pcmcia_replace_cis); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 6501a968a64..a393501554a 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -864,7 +864,6 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename) int ret = -ENOMEM; int no_funcs; int old_funcs; - cisdump_t *cis; cistpl_longlink_mfc_t mfc; if (!filename) @@ -889,16 +888,7 @@ static int pcmcia_load_firmware(struct pcmcia_device *dev, char * filename) goto release; } - cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL); - if (!cis) { - ret = -ENOMEM; - goto release; - } - - cis->Length = fw->size + 1; - memcpy(cis->Data, fw->data, fw->size); - - if (!pcmcia_replace_cis(s, cis)) + if (!pcmcia_replace_cis(s, fw->data, fw->size)) ret = 0; else { dev_printk(KERN_ERR, &dev->dev, diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 0492d2df01a..f555a505214 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -867,7 +867,7 @@ static int ds_ioctl(struct inode * inode, struct file * file, &buf->win_info.map); break; case DS_REPLACE_CIS: - ret = pcmcia_replace_cis(s, &buf->cisdump); + ret = pcmcia_replace_cis(s, buf->cisdump.Data, buf->cisdump.Length); break; case DS_BIND_REQUEST: if (!capable(CAP_SYS_ADMIN)) { diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 2c636058f49..9afe420c41f 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -912,3 +912,79 @@ void pcmcia_disable_device(struct pcmcia_device *p_dev) { pcmcia_release_window(p_dev->win); } EXPORT_SYMBOL(pcmcia_disable_device); + + +struct pcmcia_cfg_mem { + tuple_t tuple; + cisparse_t parse; + u8 buf[256]; + cistpl_cftable_entry_t dflt; +}; + +/** + * pcmcia_loop_config() - loop over configuration options + * @p_dev: the struct pcmcia_device which we need to loop for. + * @conf_check: function to call for each configuration option. + * It gets passed the struct pcmcia_device, the CIS data + * describing the configuration option, and private data + * being passed to pcmcia_loop_config() + * @priv_data: private data to be passed to the conf_check function. + * + * pcmcia_loop_config() loops over all configuration options, and calls + * the driver-specific conf_check() for each one, checking whether + * it is a valid one. + */ +int pcmcia_loop_config(struct pcmcia_device *p_dev, + int (*conf_check) (struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data), + void *priv_data) +{ + struct pcmcia_cfg_mem *cfg_mem; + + tuple_t *tuple; + int ret = -ENODEV; + unsigned int vcc; + + cfg_mem = kzalloc(sizeof(struct pcmcia_cfg_mem), GFP_KERNEL); + if (cfg_mem == NULL) + return -ENOMEM; + + /* get the current Vcc setting */ + vcc = p_dev->socket->socket.Vcc; + + tuple = &cfg_mem->tuple; + tuple->TupleData = cfg_mem->buf; + tuple->TupleDataMax = 255; + tuple->TupleOffset = 0; + tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; + tuple->Attributes = 0; + + ret = pcmcia_get_first_tuple(p_dev, tuple); + while (!ret) { + cistpl_cftable_entry_t *cfg = &cfg_mem->parse.cftable_entry; + + if (pcmcia_get_tuple_data(p_dev, tuple)) + goto next_entry; + + if (pcmcia_parse_tuple(p_dev, tuple, &cfg_mem->parse)) + goto next_entry; + + /* default values */ + p_dev->conf.ConfigIndex = cfg->index; + if (cfg->flags & CISTPL_CFTABLE_DEFAULT) + cfg_mem->dflt = *cfg; + + ret = conf_check(p_dev, cfg, &cfg_mem->dflt, vcc, priv_data); + if (!ret) + break; + +next_entry: + ret = pcmcia_get_next_tuple(p_dev, tuple); + } + + return ret; +} +EXPORT_SYMBOL(pcmcia_loop_config); diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index 006a29e91d8..ff9a3bb3c88 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -316,27 +316,18 @@ static ssize_t pccard_store_cis(struct kobject *kobj, char *buf, loff_t off, size_t count) { struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj)); - cisdump_t *cis; int error; if (off) return -EINVAL; - if (count >= 0x200) + if (count >= CISTPL_MAX_CIS_SIZE) return -EINVAL; if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - cis = kzalloc(sizeof(cisdump_t), GFP_KERNEL); - if (!cis) - return -ENOMEM; - - cis->Length = count + 1; - memcpy(cis->Data, buf, count); - - error = pcmcia_replace_cis(s, cis); - kfree(cis); + error = pcmcia_replace_cis(s, buf, count); if (error) return -EIO; diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 2dd0dc9a9ae..165ff884f48 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -140,44 +140,41 @@ static void aha152x_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int aha152x_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + /* For New Media T&J, look for a SCSI window */ + if (cfg->io.win[0].len >= 0x20) + p_dev->io.BasePort1 = cfg->io.win[0].base; + else if ((cfg->io.nwin > 1) && + (cfg->io.win[1].len >= 0x20)) + p_dev->io.BasePort1 = cfg->io.win[1].base; + if ((cfg->io.nwin > 0) && + (p_dev->io.BasePort1 < 0xffff)) { + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -EINVAL; +} + static int aha152x_config_cs(struct pcmcia_device *link) { scsi_info_t *info = link->priv; struct aha152x_setup s; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; - u_char tuple_data[64]; + int last_ret, last_fn; struct Scsi_Host *host; - + DEBUG(0, "aha152x_config(0x%p)\n", link); - tuple.TupleData = tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - /* For New Media T&J, look for a SCSI window */ - if (parse.cftable_entry.io.win[0].len >= 0x20) - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - else if ((parse.cftable_entry.io.nwin > 1) && - (parse.cftable_entry.io.win[1].len >= 0x20)) - link->io.BasePort1 = parse.cftable_entry.io.win[1].base; - if ((parse.cftable_entry.io.nwin > 0) && - (link->io.BasePort1 < 0xffff)) { - link->conf.ConfigIndex = parse.cftable_entry.index; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - } - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, aha152x_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } - + CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); @@ -208,6 +205,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); +failed: aha152x_release_cs(link); return -ENODEV; } diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index d8b99351b05..06254f46a0d 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -123,34 +123,30 @@ static void fdomain_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int fdomain_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cfg->io.win[0].base; + return pcmcia_request_io(p_dev, &p_dev->io); +} + + static int fdomain_config(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; - u_char tuple_data[64]; + int last_ret, last_fn; char str[22]; struct Scsi_Host *host; DEBUG(0, "fdomain_config(0x%p)\n", link); - tuple.TupleData = tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - link->conf.ConfigIndex = parse.cftable_entry.index; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) break; - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, fdomain_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -181,6 +177,7 @@ static int fdomain_config(struct pcmcia_device *link) cs_failed: cs_error(link, last_fn, last_ret); +failed: fdomain_release(link); return -ENODEV; } /* fdomain_config */ diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index a221b6ef9fa..7c19bf26487 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -1607,133 +1607,129 @@ static void nsp_cs_detach(struct pcmcia_device *link) is received, to configure the PCMCIA socket, and to make the ethernet device available to the system. ======================================================================*/ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) -/*====================================================================*/ -static int nsp_cs_config(struct pcmcia_device *link) -{ - int ret; - scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_ret, last_fn; - unsigned char tuple_data[64]; - config_info_t conf; - win_req_t req; - memreq_t map; - cistpl_cftable_entry_t dflt = { 0 }; - struct Scsi_Host *host; - nsp_hw_data *data = &nsp_data_base; - - nsp_dbg(NSP_DEBUG_INIT, "in"); - - tuple.Attributes = 0; - tuple.TupleData = tuple_data; - tuple.TupleDataMax = sizeof(tuple_data); - tuple.TupleOffset = 0; - - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &conf)); - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); +struct nsp_cs_configdata { + nsp_hw_data *data; + win_req_t req; +}; - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; +static int nsp_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + struct nsp_cs_configdata *cfg_mem = priv_data; - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { dflt = *cfg; } - if (cfg->index == 0) { goto next_entry; } - link->conf.ConfigIndex = cfg->index; + if (cfg->index == 0) + return -ENODEV; - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + /* Does this card need audio output? */ + if (cfg->flags & CISTPL_CFTABLE_AUDIO) { + p_dev->conf.Attributes |= CONF_ENABLE_SPKR; + p_dev->conf.Status = CCSR_AUDIO_ENA; + } - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) { - goto next_entry; - } - } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM]/10000) { - goto next_entry; - } + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) + return -ENODEV; + else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) + return -ENODEV; } if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - link->conf.Vpp = + p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM)) { - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000; + } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; } /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) { - link->conf.Attributes |= CONF_ENABLE_IRQ; - } + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; if (io->nwin > 1) { - link->io.Attributes2 = link->io.Attributes1; - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; + p_dev->io.Attributes2 = p_dev->io.Attributes1; + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(link, &link->io) != 0) + if (pcmcia_request_io(p_dev, &p_dev->io) != 0) goto next_entry; } - if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt.mem; - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - req.Attributes |= WIN_ENABLE; - req.Base = mem->win[0].host_addr; - req.Size = mem->win[0].len; - if (req.Size < 0x1000) { - req.Size = 0x1000; - } - req.AccessSpeed = 0; - if (pcmcia_request_window(&link, &req, &link->win) != 0) + if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { + memreq_t map; + cistpl_mem_t *mem = + (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; + cfg_mem->req.Attributes |= WIN_ENABLE; + cfg_mem->req.Base = mem->win[0].host_addr; + cfg_mem->req.Size = mem->win[0].len; + if (cfg_mem->req.Size < 0x1000) + cfg_mem->req.Size = 0x1000; + cfg_mem->req.AccessSpeed = 0; + if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0) goto next_entry; map.Page = 0; map.CardOffset = mem->win[0].card_addr; - if (pcmcia_map_mem_page(link->win, &map) != 0) + if (pcmcia_map_mem_page(p_dev->win, &map) != 0) goto next_entry; - data->MmioAddress = (unsigned long)ioremap_nocache(req.Base, req.Size); - data->MmioLength = req.Size; + cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); + cfg_mem->data->MmioLength = cfg_mem->req.Size; } /* If we got this far, we're cool! */ - break; - - next_entry: - nsp_dbg(NSP_DEBUG_INIT, "next"); - pcmcia_disable_device(link); - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + return 0; } +next_entry: + nsp_dbg(NSP_DEBUG_INIT, "next"); + pcmcia_disable_device(p_dev); + return -ENODEV; +} + +static int nsp_cs_config(struct pcmcia_device *link) +{ + int ret; + scsi_info_t *info = link->priv; + struct nsp_cs_configdata *cfg_mem; + struct Scsi_Host *host; + nsp_hw_data *data = &nsp_data_base; + + nsp_dbg(NSP_DEBUG_INIT, "in"); + + cfg_mem = kzalloc(sizeof(cfg_mem), GFP_KERNEL); + if (!cfg_mem) + return -ENOMEM; + cfg_mem->data = data; + + ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem); + goto cs_failed; + if (link->conf.Attributes & CONF_ENABLE_IRQ) { - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); + if (pcmcia_request_irq(link, &link->irq)) + goto cs_failed; } - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto cs_failed; if (free_ports) { if (link->io.BasePort1) { @@ -1791,20 +1787,20 @@ static int nsp_cs_config(struct pcmcia_device *link) printk(" & 0x%04x-0x%04x", link->io.BasePort2, link->io.BasePort2+link->io.NumPorts2-1); if (link->win) - printk(", mem 0x%06lx-0x%06lx", req.Base, - req.Base+req.Size-1); + printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, + cfg_mem->req.Base+cfg_mem->req.Size-1); printk("\n"); + kfree(cfg_mem); return 0; cs_failed: nsp_dbg(NSP_DEBUG_INIT, "config fail"); - cs_error(link, last_fn, last_ret); nsp_cs_release(link); + kfree(cfg_mem); return -ENODEV; } /* nsp_cs_config */ -#undef CS_CHECK /*====================================================================== diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index 67c5a58d17d..20c3e5e6d88 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -195,39 +195,33 @@ static void qlogic_detach(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int qlogic_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + + if (p_dev->io.BasePort1 == 0) + return -ENODEV; + + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int qlogic_config(struct pcmcia_device * link) { scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; - unsigned short tuple_data[32]; + int last_ret, last_fn; struct Scsi_Host *host; DEBUG(0, "qlogic_config(0x%p)\n", link); - info->manf_id = link->manf_id; - - tuple.TupleData = (cisdata_t *) tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - link->conf.ConfigIndex = parse.cftable_entry.index; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - if (link->io.BasePort1 != 0) { - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - break; - } - next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, qlogic_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -262,6 +256,7 @@ static int qlogic_config(struct pcmcia_device * link) cs_failed: cs_error(link, last_fn, last_ret); pcmcia_disable_device(link); +failed: return -ENODEV; } /* qlogic_config */ diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 0be232b58ff..b330c11a175 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -700,15 +700,27 @@ static struct scsi_host_template sym53c500_driver_template = { #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int SYM53C500_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + + if (p_dev->io.BasePort1 == 0) + return -ENODEV; + + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int SYM53C500_config(struct pcmcia_device *link) { struct scsi_info_t *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int i, last_ret, last_fn; + int last_ret, last_fn; int irq_level, port_base; - unsigned short tuple_data[32]; struct Scsi_Host *host; struct scsi_host_template *tpnt = &sym53c500_driver_template; struct sym53c500_data *data; @@ -717,27 +729,10 @@ SYM53C500_config(struct pcmcia_device *link) info->manf_id = link->manf_id; - tuple.TupleData = (cisdata_t *)tuple_data; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - link->conf.ConfigIndex = parse.cftable_entry.index; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - - if (link->io.BasePort1 != 0) { - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - break; - } -next_entry: - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); + last_ret = pcmcia_loop_config(link, SYM53C500_config_check, NULL); + if (last_ret) { + cs_error(link, RequestIO, last_ret); + goto failed; } CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); @@ -831,6 +826,7 @@ err_release: cs_failed: cs_error(link, last_fn, last_ret); +failed: SYM53C500_release(link); return -ENODEV; } /* SYM53C500_config */ diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 164d2a42eb5..7e00e672bfe 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -439,43 +439,57 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) return pcmcia_parse_tuple(handle, tuple, parse); } -static int -next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse) +/*====================================================================*/ + +static int simple_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - int i; - i = pcmcia_get_next_tuple(handle, tuple); - if (i != CS_SUCCESS) - return CS_NO_MORE_ITEMS; - i = pcmcia_get_tuple_data(handle, tuple); - if (i != CS_SUCCESS) - return i; - return pcmcia_parse_tuple(handle, tuple, parse); + static const int size_table[2] = { 8, 16 }; + int *try = priv_data; + + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) + && (cf->io.win[0].base != 0)) { + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -EINVAL; } -/*====================================================================*/ +static int simple_config_check_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + int j; + + if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + for (j = 0; j < 5; j++) { + p_dev->io.BasePort1 = base[j]; + p_dev->io.IOAddrLines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + } + return -ENODEV; +} static int simple_config(struct pcmcia_device *link) { - static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - static const int size_table[2] = { 8, 16 }; struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; config_info_t config; - int i, j, try; - int s; - - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; + int i, try; /* If the card is already configured, look up the port and irq */ i = pcmcia_get_configuration_info(link, &config); @@ -490,70 +504,28 @@ static int simple_config(struct pcmcia_device *link) info->slave = 1; } if (info->slave) { - kfree(cfg_mem); return setup_serial(link, info, port, config.AssignedIRQ); } } - /* First pass: look for a config entry that looks normal. */ - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; - /* Two tries: without IO aliases, then with aliases */ - for (s = 0; s < 2; s++) { - for (try = 0; try < 2; try++) { - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if (i != CS_SUCCESS) - goto next_entry; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - link->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && - (cf->io.win[0].base != 0)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = (try == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } -next_entry: - i = next_tuple(link, tuple, parse); - } - } - } + /* First pass: look for a config entry that looks normal. + * Two tries: without IO aliases, then with aliases */ + for (try = 0; try < 4; try++) + if (!pcmcia_loop_config(link, simple_config_check, &try)) + goto found_port; + /* Second pass: try to find an entry that isn't picky about its base address, then try to grab any standard serial port address, and finally try to get any free port. */ - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && - ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - link->conf.ConfigIndex = cf->index; - for (j = 0; j < 5; j++) { - link->io.BasePort1 = base[j]; - link->io.IOAddrLines = base[j] ? 16 : 3; - i = pcmcia_request_io(link, &link->io); - if (i == CS_SUCCESS) - goto found_port; - } - } - i = next_tuple(link, tuple, parse); - } + if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL)) + goto found_port; - found_port: - if (i != CS_SUCCESS) { - printk(KERN_NOTICE - "serial_cs: no usable port range found, giving up\n"); - cs_error(link, RequestIO, i); - kfree(cfg_mem); - return -1; - } + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link, RequestIO, i); + return -1; +found_port: i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { cs_error(link, RequestIRQ, i); @@ -571,86 +543,74 @@ next_entry: i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { cs_error(link, RequestConfiguration, i); - kfree(cfg_mem); return -1; } - kfree(cfg_mem); return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); } -static int multi_config(struct pcmcia_device * link) +static int multi_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) { - struct serial_info *info = link->priv; - struct serial_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - cisparse_t *parse; - cistpl_cftable_entry_t *cf; - int i, rc, base2 = 0; + int *base2 = priv_data; + + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) { + *base2 = p_dev->io.BasePort1 + 8; + return 0; + } + } + return -ENODEV; +} - cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - cf = &parse->cftable_entry; - buf = cfg_mem->buf; +static int multi_config_check_notpicky(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + int *base2 = priv_data; + + if (cf->io.nwin == 2) { + p_dev->io.BasePort1 = cf->io.win[0].base; + p_dev->io.BasePort2 = cf->io.win[1].base; + p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; + if (!pcmcia_request_io(p_dev, &p_dev->io)) { + *base2 = p_dev->io.BasePort2; + return 0; + } + } + return -ENODEV; +} - tuple->TupleData = (cisdata_t *) buf; - tuple->TupleOffset = 0; - tuple->TupleDataMax = 255; - tuple->Attributes = 0; - tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY; +static int multi_config(struct pcmcia_device *link) +{ + struct serial_info *info = link->priv; + int i, base2 = 0; /* First, look for a generic full-sized window */ link->io.NumPorts1 = info->multi * 8; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - /* The quad port cards have bad CIS's, so just look for a - window larger than 8 ports and assume it will be right */ - if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && - (cf->io.win[0].len > 8)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort1 + 8; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); - } - - /* If that didn't work, look for two windows */ - if (i != CS_SUCCESS) { + if (pcmcia_loop_config(link, multi_config_check, &base2)) { + /* If that didn't work, look for two windows */ link->io.NumPorts1 = link->io.NumPorts2 = 8; info->multi = 2; - i = first_tuple(link, tuple, parse); - while (i != CS_NO_MORE_ITEMS) { - if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { - link->conf.ConfigIndex = cf->index; - link->io.BasePort1 = cf->io.win[0].base; - link->io.BasePort2 = cf->io.win[1].base; - link->io.IOAddrLines = - cf->io.flags & CISTPL_IO_LINES_MASK; - i = pcmcia_request_io(link, &link->io); - base2 = link->io.BasePort2; - if (i == CS_SUCCESS) - break; - } - i = next_tuple(link, tuple, parse); + if (pcmcia_loop_config(link, multi_config_check_notpicky, + &base2)) { + printk(KERN_NOTICE "serial_cs: no usable port range" + "found, giving up\n"); + return -ENODEV; } } - if (i != CS_SUCCESS) { - cs_error(link, RequestIO, i); - rc = -1; - goto free_cfg_mem; - } - i = pcmcia_request_irq(link, &link->irq); if (i != CS_SUCCESS) { + /* FIXME: comment does not fit, error handling does not fit */ printk(KERN_NOTICE "serial_cs: no usable port range found, giving up\n"); cs_error(link, RequestIRQ, i); @@ -666,8 +626,7 @@ static int multi_config(struct pcmcia_device * link) i = pcmcia_request_configuration(link, &link->conf); if (i != CS_SUCCESS) { cs_error(link, RequestConfiguration, i); - rc = -1; - goto free_cfg_mem; + return -ENODEV; } /* The Oxford Semiconductor OXCF950 cards are in fact single-port: @@ -678,7 +637,8 @@ static int multi_config(struct pcmcia_device * link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (cf->index == 1 || cf->index == 3) { + if (link->conf.ConfigIndex == 1 || + link->conf.ConfigIndex == 3) { err = setup_serial(link, info, base2, link->irq.AssignedIRQ); base2 = link->io.BasePort1; @@ -695,18 +655,14 @@ static int multi_config(struct pcmcia_device * link) if (info->quirk && info->quirk->wakeup) info->quirk->wakeup(link); - rc = 0; - goto free_cfg_mem; + return 0; } setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ); for (i = 0; i < info->multi - 1; i++) setup_serial(link, info, base2 + (8 * i), link->irq.AssignedIRQ); - rc = 0; -free_cfg_mem: - kfree(cfg_mem); - return rc; + return 0; } /*====================================================================== diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index ff9a29b7633..347c3ed1d9f 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -124,65 +124,53 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j) return; } +static int ixj_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + if (io->nwin == 2) { + p_dev->io.BasePort2 = io->win[1].base; + p_dev->io.NumPorts2 = io->win[1].len; + } + if (!pcmcia_request_io(p_dev, &p_dev->io)) + return 0; + } + return -ENODEV; +} + static int ixj_config(struct pcmcia_device * link) { IXJ *j; ixj_info_t *info; - tuple_t tuple; - u_short buf[128]; - cisparse_t parse; - cistpl_cftable_entry_t *cfg = &parse.cftable_entry; - cistpl_cftable_entry_t dflt = - { - 0 - }; - int last_ret, last_fn; + cistpl_cftable_entry_t dflt = { 0 }; + info = link->priv; DEBUG(0, "ixj_config(0x%p)\n", link); - tuple.TupleData = (cisdata_t *) buf; - tuple.TupleOffset = 0; - tuple.TupleDataMax = 255; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - if (pcmcia_get_tuple_data(link, &tuple) != 0 || - pcmcia_parse_tuple(link, &tuple, &parse) != 0) - goto next_entry; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->conf.ConfigIndex = cfg->index; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - if (io->nwin == 2) { - link->io.BasePort2 = io->win[1].base; - link->io.NumPorts2 = io->win[1].len; - } - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - /* If we've got this far, we're done */ - break; - } - next_entry: - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) - dflt = *cfg; - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - } - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + if (pcmcia_loop_config(link, ixj_config_check, &dflt)) + goto cs_failed; + + if (pcmcia_request_configuration(link, &link->conf)) + goto cs_failed; /* * Register the card with the core. - */ - j=ixj_pcmcia_probe(link->io.BasePort1,link->io.BasePort1 + 0x10); + */ + j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10); info->ndev = 1; info->node.major = PHONE_MAJOR; link->dev_node = &info->node; ixj_get_serial(link, j); return 0; + cs_failed: - cs_error(link, last_fn, last_ret); ixj_cs_release(link); return -ENODEV; } diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 5da63f53500..ca733b7caea 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -155,97 +155,72 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } +static int sl811_cs_config_check(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->index == 0) + return -ENODEV; + + /* Use power settings for Vcc and Vpp if present */ + /* Note that the CIS values need to be rescaled */ + if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) + return -ENODEV; + } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { + if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) + return -ENODEV; + } + + if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; + else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) + p_dev->conf.Vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; + + /* we need an interrupt */ + if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = io->win[0].base; + p_dev->io.NumPorts1 = io->win[0].len; + + return pcmcia_request_io(p_dev, &p_dev->io); + } + pcmcia_disable_device(p_dev); + return -ENODEV; +} + + static int sl811_cs_config(struct pcmcia_device *link) { struct device *parent = &handle_to_dev(link); local_info_t *dev = link->priv; - tuple_t tuple; - cisparse_t parse; int last_fn, last_ret; - u_char buf[64]; - config_info_t conf; - cistpl_cftable_entry_t dflt = { 0 }; DBG(0, "sl811_cs_config(0x%p)\n", link); - /* Look up the current Vcc */ - CS_CHECK(GetConfigurationInfo, - pcmcia_get_configuration_info(link, &conf)); - - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - while (1) { - cistpl_cftable_entry_t *cfg = &(parse.cftable_entry); - - if (pcmcia_get_tuple_data(link, &tuple) != 0 - || pcmcia_parse_tuple(link, &tuple, &parse) - != 0) - goto next_entry; - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) { - dflt = *cfg; - } - - if (cfg->index == 0) - goto next_entry; - - link->conf.ConfigIndex = cfg->index; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 - != conf.Vcc) - goto next_entry; - } else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000 - != conf.Vcc) - goto next_entry; - } - - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM)) - link->conf.Vpp = - dflt.vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* we need an interrupt */ - if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1) - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = link->io.NumPorts2 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - - if (pcmcia_request_io(link, &link->io) != 0) - goto next_entry; - } - break; - -next_entry: - pcmcia_disable_device(link); - last_ret = pcmcia_get_next_tuple(link, &tuple); - } + if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) + goto failed; /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) - goto cs_failed; + goto failed; if (link->conf.Attributes & CONF_ENABLE_IRQ) CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); else - goto cs_failed; + goto failed; CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); @@ -266,8 +241,9 @@ next_entry: if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) < 0) { cs_failed: - printk("sl811_cs_config failed\n"); cs_error(link, last_fn, last_ret); +failed: + printk(KERN_WARNING "sl811_cs_config failed\n"); sl811_cs_release(link); return -ENODEV; } diff --git a/include/pcmcia/cistpl.h b/include/pcmcia/cistpl.h index e2e10c1e9a0..75a9d34c634 100644 --- a/include/pcmcia/cistpl.h +++ b/include/pcmcia/cistpl.h @@ -580,14 +580,8 @@ typedef struct cisinfo_t { #define CISTPL_MAX_CIS_SIZE 0x200 -/* For ReplaceCIS */ -typedef struct cisdump_t { - u_int Length; - cisdata_t Data[CISTPL_MAX_CIS_SIZE]; -} cisdump_t; - - -int pcmcia_replace_cis(struct pcmcia_socket *s, cisdump_t *cis); +int pcmcia_replace_cis(struct pcmcia_socket *s, + const u8 *data, const size_t len); /* don't use outside of PCMCIA core yet */ int pccard_get_next_tuple(struct pcmcia_socket *s, unsigned int func, tuple_t *tuple); @@ -613,4 +607,12 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned #define pcmcia_validate_cis(p_dev, info) \ pccard_validate_cis(p_dev->socket, p_dev->func, info) +int pcmcia_loop_config(struct pcmcia_device *p_dev, + int (*conf_check) (struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cf, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data), + void *priv_data); + #endif /* LINUX_CISTPL_H */ diff --git a/include/pcmcia/ds.h b/include/pcmcia/ds.h index b316027c853..2d36a4f80e5 100644 --- a/include/pcmcia/ds.h +++ b/include/pcmcia/ds.h @@ -68,6 +68,12 @@ typedef struct region_info_t { #define REGION_BAR_MASK 0xe000 #define REGION_BAR_SHIFT 13 +/* For ReplaceCIS */ +typedef struct cisdump_t { + u_int Length; + cisdata_t Data[CISTPL_MAX_CIS_SIZE]; +} cisdump_t; + typedef union ds_ioctl_arg_t { adjust_t adjust; config_info_t config; diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index ed919dd9bb5..e34bef0fc74 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -199,8 +199,8 @@ struct pcmcia_socket { io_window_t io[MAX_IO_WIN]; window_t win[MAX_WIN]; struct list_head cis_cache; - u_int fake_cis_len; - char *fake_cis; + size_t fake_cis_len; + u8 *fake_cis; struct list_head socket_list; struct completion socket_released; |