summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/mips/Kconfig24
-rw-r--r--arch/mips/kernel/kspd.c19
-rw-r--r--arch/mips/kernel/mips-mt.c22
-rw-r--r--arch/mips/kernel/rtlx.c22
-rw-r--r--arch/mips/kernel/smtc.c16
-rw-r--r--arch/mips/kernel/vpe.c263
-rw-r--r--include/asm-mips/mips_mt.h6
7 files changed, 203 insertions, 169 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0893e084150..3513e226837 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1377,17 +1377,6 @@ config MIPS_MT_SMTC
This is a kernel model which is known a SMTC or lately has been
marketesed into SMVP.
-config MIPS_VPE_LOADER
- bool "VPE loader support."
- depends on SYS_SUPPORTS_MULTITHREADING
- select CPU_MIPSR2_IRQ_VI
- select CPU_MIPSR2_IRQ_EI
- select CPU_MIPSR2_SRS
- select MIPS_MT
- help
- Includes a loader for loading an elf relocatable object
- onto another VPE and running it.
-
endchoice
config MIPS_MT
@@ -1398,8 +1387,19 @@ config SYS_SUPPORTS_MULTITHREADING
config MIPS_MT_FPAFF
bool "Dynamic FPU affinity for FP-intensive threads"
- depends on MIPS_MT
default y
+ depends on MIPS_MT_SMP || MIPS_MT_SMTC
+
+config MIPS_VPE_LOADER
+ bool "VPE loader support."
+ depends on SYS_SUPPORTS_MULTITHREADING
+ select CPU_MIPSR2_IRQ_VI
+ select CPU_MIPSR2_IRQ_EI
+ select CPU_MIPSR2_SRS
+ select MIPS_MT
+ help
+ Includes a loader for loading an elf relocatable object
+ onto another VPE and running it.
config MIPS_MT_SMTC_INSTANT_REPLAY
bool "Low-latency Dispatch of Deferred SMTC IPIs"
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index c6580018c94..cb9a14a1ca5 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -89,7 +89,7 @@ static int sp_stopping = 0;
#define MTSP_O_EXCL 0x0800
#define MTSP_O_BINARY 0x8000
-#define SP_VPE 1
+extern int tclimit;
struct apsp_table {
int sp;
@@ -225,8 +225,8 @@ void sp_work_handle_request(void)
/* Run the syscall at the priviledge of the user who loaded the
SP program */
- if (vpe_getuid(SP_VPE))
- sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE));
+ if (vpe_getuid(tclimit))
+ sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
switch (sc.cmd) {
/* needs the flags argument translating from SDE kit to
@@ -245,7 +245,7 @@ void sp_work_handle_request(void)
case MTSP_SYSCALL_EXIT:
list_for_each_entry(n, &kspd_notifylist, list)
- n->kspd_sp_exit(SP_VPE);
+ n->kspd_sp_exit(tclimit);
sp_stopping = 1;
printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n",
@@ -255,7 +255,7 @@ void sp_work_handle_request(void)
case MTSP_SYSCALL_OPEN:
generic.arg1 = translate_open_flags(generic.arg1);
- vcwd = vpe_getcwd(SP_VPE);
+ vcwd = vpe_getcwd(tclimit);
/* change to the cwd of the process that loaded the SP program */
old_fs = get_fs();
@@ -283,7 +283,7 @@ void sp_work_handle_request(void)
break;
} /* switch */
- if (vpe_getuid(SP_VPE))
+ if (vpe_getuid(tclimit))
sp_setfsuidgid( 0, 0);
old_fs = get_fs();
@@ -364,10 +364,9 @@ static void startwork(int vpe)
}
INIT_WORK(&work, sp_work);
- queue_work(workqueue, &work);
- } else
- queue_work(workqueue, &work);
+ }
+ queue_work(workqueue, &work);
}
static void stopwork(int vpe)
@@ -389,7 +388,7 @@ static int kspd_module_init(void)
notify.start = startwork;
notify.stop = stopwork;
- vpe_notify(SP_VPE, &notify);
+ vpe_notify(tclimit, &notify);
return 0;
}
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 1a7d8923129..7169a4db37b 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -21,6 +21,28 @@
#include <asm/r4kcache.h>
#include <asm/cacheflush.h>
+int vpelimit;
+
+static int __init maxvpes(char *str)
+{
+ get_option(&str, &vpelimit);
+
+ return 1;
+}
+
+__setup("maxvpes=", maxvpes);
+
+int tclimit;
+
+static int __init maxtcs(char *str)
+{
+ get_option(&str, &tclimit);
+
+ return 1;
+}
+
+__setup("maxtcs=", maxtcs);
+
/*
* Dump new MIPS MT state for the core. Does not leave TCs halted.
* Takes an argument which taken to be a pre-call MVPControl value.
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 8cf24d716d4..5c040060560 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -40,12 +40,11 @@
#include <asm/atomic.h>
#include <asm/cpu.h>
#include <asm/processor.h>
+#include <asm/mips_mt.h>
#include <asm/system.h>
#include <asm/vpe.h>
#include <asm/rtlx.h>
-#define RTLX_TARG_VPE 1
-
static struct rtlx_info *rtlx;
static int major;
static char module_name[] = "rtlx";
@@ -165,10 +164,10 @@ int rtlx_open(int index, int can_sleep)
}
if (rtlx == NULL) {
- if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) {
+ if( (p = vpe_get_shared(tclimit)) == NULL) {
if (can_sleep) {
__wait_event_interruptible(channel_wqs[index].lx_queue,
- (p = vpe_get_shared(RTLX_TARG_VPE)),
+ (p = vpe_get_shared(tclimit)),
ret);
if (ret)
goto out_fail;
@@ -477,6 +476,19 @@ static int rtlx_module_init(void)
struct device *dev;
int i, err;
+ if (!cpu_has_mipsmt) {
+ printk("VPE loader: not a MIPS MT capable processor\n");
+ return -ENODEV;
+ }
+
+ if (tclimit == 0) {
+ printk(KERN_WARNING "No TCs reserved for AP/SP, not "
+ "initializing RTLX.\nPass maxtcs=<n> argument as kernel "
+ "argument\n");
+
+ return -ENODEV;
+ }
+
major = register_chrdev(0, module_name, &rtlx_fops);
if (major < 0) {
printk(register_chrdev_failed);
@@ -501,7 +513,7 @@ static int rtlx_module_init(void)
/* set up notifiers */
notify.start = starting;
notify.stop = stopping;
- vpe_notify(RTLX_TARG_VPE, &notify);
+ vpe_notify(tclimit, &notify);
if (cpu_has_vint)
set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index f2c7aed663e..6b3c3ea8bc6 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -86,25 +86,11 @@ unsigned int smtc_status = 0;
/* Boot command line configuration overrides */
-static int vpelimit = 0;
-static int tclimit = 0;
static int ipibuffers = 0;
static int nostlb = 0;
static int asidmask = 0;
unsigned long smtc_asid_mask = 0xff;
-static int __init maxvpes(char *str)
-{
- get_option(&str, &vpelimit);
- return 1;
-}
-
-static int __init maxtcs(char *str)
-{
- get_option(&str, &tclimit);
- return 1;
-}
-
static int __init ipibufs(char *str)
{
get_option(&str, &ipibuffers);
@@ -137,8 +123,6 @@ static int __init asidmask_set(char *str)
return 1;
}
-__setup("maxvpes=", maxvpes);
-__setup("maxtcs=", maxtcs);
__setup("ipibufs=", ipibufs);
__setup("nostlb", stlb_disable);
__setup("asidmask=", asidmask_set);
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index a2bee10f04c..c726c47cd2c 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -27,7 +27,6 @@
* To load and run, simply cat a SP 'program file' to /dev/vpe1.
* i.e cat spapp >/dev/vpe1.
*/
-
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
@@ -54,6 +53,7 @@
#include <asm/system.h>
#include <asm/vpe.h>
#include <asm/kspd.h>
+#include <asm/mips_mt.h>
typedef void *vpe_handle;
@@ -132,14 +132,9 @@ struct tc {
enum tc_state state;
int index;
- /* parent VPE */
- struct vpe *pvpe;
-
- /* The list of TC's with this VPE */
- struct list_head tc;
-
- /* The global list of tc's */
- struct list_head list;
+ struct vpe *pvpe; /* parent VPE */
+ struct list_head tc; /* The list of TC's with this VPE */
+ struct list_head list; /* The global list of tc's */
};
struct {
@@ -217,18 +212,17 @@ struct vpe *alloc_vpe(int minor)
/* allocate a tc. At startup only tc0 is running, all other can be halted. */
struct tc *alloc_tc(int index)
{
- struct tc *t;
-
- if ((t = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) {
- return NULL;
- }
+ struct tc *tc;
- INIT_LIST_HEAD(&t->tc);
- list_add_tail(&t->list, &vpecontrol.tc_list);
+ if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
+ goto out;
- t->index = index;
+ INIT_LIST_HEAD(&tc->tc);
+ tc->index = index;
+ list_add_tail(&tc->list, &vpecontrol.tc_list);
- return t;
+out:
+ return tc;
}
/* clean up and free everything */
@@ -663,66 +657,48 @@ static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
}
#endif
-static void dump_tc(struct tc *t)
-{
- unsigned long val;
-
- settc(t->index);
- printk(KERN_DEBUG "VPE loader: TC index %d targtc %ld "
- "TCStatus 0x%lx halt 0x%lx\n",
- t->index, read_c0_vpecontrol() & VPECONTROL_TARGTC,
- read_tc_c0_tcstatus(), read_tc_c0_tchalt());
-
- printk(KERN_DEBUG " tcrestart 0x%lx\n", read_tc_c0_tcrestart());
- printk(KERN_DEBUG " tcbind 0x%lx\n", read_tc_c0_tcbind());
-
- val = read_c0_vpeconf0();
- printk(KERN_DEBUG " VPEConf0 0x%lx MVP %ld\n", val,
- (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT);
-
- printk(KERN_DEBUG " c0 status 0x%lx\n", read_vpe_c0_status());
- printk(KERN_DEBUG " c0 cause 0x%lx\n", read_vpe_c0_cause());
-
- printk(KERN_DEBUG " c0 badvaddr 0x%lx\n", read_vpe_c0_badvaddr());
- printk(KERN_DEBUG " c0 epc 0x%lx\n", read_vpe_c0_epc());
-}
-
-static void dump_tclist(void)
-{
- struct tc *t;
-
- list_for_each_entry(t, &vpecontrol.tc_list, list) {
- dump_tc(t);
- }
-}
-
/* We are prepared so configure and start the VPE... */
static int vpe_run(struct vpe * v)
{
+ unsigned long flags, val, dmt_flag;
struct vpe_notifications *n;
- unsigned long val, dmt_flag;
+ unsigned int vpeflags;
struct tc *t;
/* check we are the Master VPE */
+ local_irq_save(flags);
val = read_c0_vpeconf0();
if (!(val & VPECONF0_MVP)) {
printk(KERN_WARNING
"VPE loader: only Master VPE's are allowed to configure MT\n");
+ local_irq_restore(flags);
+
return -1;
}
- /* disable MT (using dvpe) */
- dvpe();
+ dmt_flag = dmt();
+ vpeflags = dvpe();
if (!list_empty(&v->tc)) {
if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
- printk(KERN_WARNING "VPE loader: TC %d is already in use.\n",
- t->index);
+ evpe(vpeflags);
+ emt(dmt_flag);
+ local_irq_restore(flags);
+
+ printk(KERN_WARNING
+ "VPE loader: TC %d is already in use.\n",
+ t->index);
return -ENOEXEC;
}
} else {
- printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n",
+ evpe(vpeflags);
+ emt(dmt_flag);
+ local_irq_restore(flags);
+
+ printk(KERN_WARNING
+ "VPE loader: No TC's associated with VPE %d\n",
v->minor);
+
return -ENOEXEC;
}
@@ -733,21 +709,20 @@ static int vpe_run(struct vpe * v)
/* should check it is halted, and not activated */
if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
- printk(KERN_WARNING "VPE loader: TC %d is already doing something!\n",
+ evpe(vpeflags);
+ emt(dmt_flag);
+ local_irq_restore(flags);
+
+ printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
t->index);
- dump_tclist();
+
return -ENOEXEC;
}
- /*
- * Disable multi-threaded execution whilst we activate, clear the
- * halt bit and bound the tc to the other VPE...
- */
- dmt_flag = dmt();
-
/* Write the address we want it to start running from in the TCPC register. */
write_tc_c0_tcrestart((unsigned long)v->__start);
write_tc_c0_tccontext((unsigned long)0);
+
/*
* Mark the TC as activated, not interrupt exempt and not dynamically
* allocatable
@@ -763,15 +738,14 @@ static int vpe_run(struct vpe * v)
* here... Or set $a3 to zero and define DFLT_STACK_SIZE and
* DFLT_HEAP_SIZE when you compile your program
*/
- mttgpr(7, physical_memsize);
-
+ mttgpr(7, physical_memsize);
/* set up VPE1 */
/*
* bind the TC to VPE 1 as late as possible so we only have the final
* VPE registers to set up, and so an EJTAG probe can trigger on it
*/
- write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | v->minor);
+ write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
@@ -793,15 +767,16 @@ static int vpe_run(struct vpe * v)
/* take system out of configuration state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
- /* now safe to re-enable multi-threading */
- emt(dmt_flag);
-
- /* set it running */
+#ifdef CONFIG_SMP
evpe(EVPE_ENABLE);
+#else
+ evpe(vpeflags);
+#endif
+ emt(dmt_flag);
+ local_irq_restore(flags);
- list_for_each_entry(n, &v->notify, list) {
- n->start(v->minor);
- }
+ list_for_each_entry(n, &v->notify, list)
+ n->start(minor);
return 0;
}
@@ -1023,23 +998,15 @@ static int vpe_elfload(struct vpe * v)
return 0;
}
-void __used dump_vpe(struct vpe * v)
-{
- struct tc *t;
-
- settc(v->minor);
-
- printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol());
- printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0());
-
- list_for_each_entry(t, &vpecontrol.tc_list, list)
- dump_tc(t);
-}
-
static void cleanup_tc(struct tc *tc)
{
+ unsigned long flags;
+ unsigned int mtflags, vpflags;
int tmp;
+ local_irq_save(flags);
+ mtflags = dmt();
+ vpflags = dvpe();
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -1054,9 +1021,12 @@ static void cleanup_tc(struct tc *tc)
write_tc_c0_tchalt(TCHALT_H);
/* bind it to anything other than VPE1 */
- write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
+// write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
}
static int getcwd(char *buff, int size)
@@ -1077,36 +1047,32 @@ static int getcwd(char *buff, int size)
/* checks VPE is unused and gets ready to load program */
static int vpe_open(struct inode *inode, struct file *filp)
{
- int minor, ret;
enum vpe_state state;
- struct vpe *v;
struct vpe_notifications *not;
+ struct vpe *v;
+ int ret;
- /* assume only 1 device at the mo. */
- if ((minor = iminor(inode)) != 1) {
+ if (minor != iminor(inode)) {
+ /* assume only 1 device at the moment. */
printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
return -ENODEV;
}
- if ((v = get_vpe(minor)) == NULL) {
+ if ((v = get_vpe(tclimit)) == NULL) {
printk(KERN_WARNING "VPE loader: unable to get vpe\n");
return -ENODEV;
}
state = xchg(&v->state, VPE_STATE_INUSE);
if (state != VPE_STATE_UNUSED) {
- dvpe();
-
printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
- dump_tc(get_tc(minor));
-
list_for_each_entry(not, &v->notify, list) {
- not->stop(minor);
+ not->stop(tclimit);
}
release_progmem(v->load_addr);
- cleanup_tc(get_tc(minor));
+ cleanup_tc(get_tc(tclimit));
}
/* this of-course trashes what was there before... */
@@ -1133,26 +1099,25 @@ static int vpe_open(struct inode *inode, struct file *filp)
v->shared_ptr = NULL;
v->__start = 0;
+
return 0;
}
static int vpe_release(struct inode *inode, struct file *filp)
{
- int minor, ret = 0;
struct vpe *v;
Elf_Ehdr *hdr;
+ int ret = 0;
- minor = iminor(inode);
- if ((v = get_vpe(minor)) == NULL)
+ v = get_vpe(tclimit);
+ if (v == NULL)
return -ENODEV;
- // simple case of fire and forget, so tell the VPE to run...
-
hdr = (Elf_Ehdr *) v->pbuffer;
if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
- if (vpe_elfload(v) >= 0)
+ if (vpe_elfload(v) >= 0) {
vpe_run(v);
- else {
+ } else {
printk(KERN_WARNING "VPE loader: ELF load failed.\n");
ret = -ENOEXEC;
}
@@ -1179,12 +1144,14 @@ static int vpe_release(struct inode *inode, struct file *filp)
static ssize_t vpe_write(struct file *file, const char __user * buffer,
size_t count, loff_t * ppos)
{
- int minor;
size_t ret = count;
struct vpe *v;
- minor = iminor(file->f_path.dentry->d_inode);
- if ((v = get_vpe(minor)) == NULL)
+ if (iminor(file->f_path.dentry->d_inode) != minor)
+ return -ENODEV;
+
+ v = get_vpe(tclimit);
+ if (v == NULL)
return -ENODEV;
if (v->pbuffer == NULL) {
@@ -1370,17 +1337,34 @@ static struct device *vpe_dev;
static int __init vpe_module_init(void)
{
+ unsigned int mtflags, vpflags;
+ int hw_tcs, hw_vpes, tc, err = 0;
+ unsigned long flags, val;
struct vpe *v = NULL;
struct device *dev;
struct tc *t;
- unsigned long val;
- int i, err;
if (!cpu_has_mipsmt) {
printk("VPE loader: not a MIPS MT capable processor\n");
return -ENODEV;
}
+ if (vpelimit == 0) {
+ printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
+ "initializing VPE loader.\nPass maxvpes=<n> argument as "
+ "kernel argument\n");
+
+ return -ENODEV;
+ }
+
+ if (tclimit == 0) {
+ printk(KERN_WARNING "No TCs reserved for AP/SP, not "
+ "initializing VPE loader.\nPass maxtcs=<n> argument as "
+ "kernel argument\n");
+
+ return -ENODEV;
+ }
+
major = register_chrdev(0, module_name, &vpe_fops);
if (major < 0) {
printk("VPE loader: unable to register character device\n");
@@ -1388,40 +1372,61 @@ static int __init vpe_module_init(void)
}
dev = device_create(mt_class, NULL, MKDEV(major, minor),
- "tc%d", minor);
+ "vpe%d", minor);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_chrdev;
}
vpe_dev = dev;
- dmt();
- dvpe();
+ local_irq_save(flags);
+ mtflags = dmt();
+ vpflags = dvpe();
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
/* dump_mtregs(); */
-
val = read_c0_mvpconf0();
- for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) {
- t = alloc_tc(i);
+ hw_tcs = (val & MVPCONF0_PTC) + 1;
+ hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+
+ for (tc = tclimit; tc < hw_tcs; tc++) {
+ /*
+ * Must re-enable multithreading temporarily or in case we
+ * reschedule send IPIs or similar we might hang.
+ */
+ clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
+ t = alloc_tc(tc);
+ if (!t) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ local_irq_save(flags);
+ mtflags = dmt();
+ vpflags = dvpe();
+ set_c0_mvpcontrol(MVPCONTROL_VPC);
/* VPE's */
- if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) {
- settc(i);
+ if (tc < hw_tcs) {
+ settc(tc);
- if ((v = alloc_vpe(i)) == NULL) {
+ if ((v = alloc_vpe(tc)) == NULL) {
printk(KERN_WARNING "VPE: unable to allocate VPE\n");
- return -ENODEV;
+
+ goto out_reenable;
}
/* add the tc to the list of this vpe's tc's. */
list_add(&t->tc, &v->tc);
/* deactivate all but vpe0 */
- if (i != 0) {
+ if (tc >= tclimit) {
unsigned long tmp = read_vpe_c0_vpeconf0();
tmp &= ~VPECONF0_VPA;
@@ -1434,7 +1439,7 @@ static int __init vpe_module_init(void)
/* disable multi-threading with TC's */
write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
- if (i != 0) {
+ if (tc >= vpelimit) {
/*
* Set config to be the same as vpe0,
* particularly kseg0 coherency alg
@@ -1446,10 +1451,10 @@ static int __init vpe_module_init(void)
/* TC's */
t->pvpe = v; /* set the parent vpe */
- if (i != 0) {
+ if (tc >= tclimit) {
unsigned long tmp;
- settc(i);
+ settc(tc);
/* Any TC that is bound to VPE0 gets left as is - in case
we are running SMTC on VPE0. A TC that is bound to any
@@ -1479,9 +1484,14 @@ static int __init vpe_module_init(void)
}
}
+out_reenable:
/* release config state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ evpe(vpflags);
+ emt(mtflags);
+ local_irq_restore(flags);
+
#ifdef CONFIG_MIPS_APSP_KSPD
kspd_events.kspd_sp_exit = kspd_sp_exit;
#endif
@@ -1490,6 +1500,7 @@ static int __init vpe_module_init(void)
out_chrdev:
unregister_chrdev(major, module_name);
+out:
return err;
}
diff --git a/include/asm-mips/mips_mt.h b/include/asm-mips/mips_mt.h
index 8045abc78d0..ac7935203f8 100644
--- a/include/asm-mips/mips_mt.h
+++ b/include/asm-mips/mips_mt.h
@@ -8,6 +8,12 @@
#include <linux/cpumask.h>
+/*
+ * How many VPEs and TCs is Linux allowed to use? 0 means no limit.
+ */
+extern int tclimit;
+extern int vpelimit;
+
extern cpumask_t mt_fpu_cpumask;
extern unsigned long mt_fpemul_threshold;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-01 13:44:10 +0000