summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/mach-pxa/devices.c20
-rw-r--r--arch/arm/mach-pxa/pxa25x.c1
-rw-r--r--arch/arm/mach-pxa/pxa27x.c1
-rw-r--r--arch/arm/mach-pxa/pxa300.c1
-rw-r--r--arch/arm/mach-pxa/pxa320.c1
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c1
-rw-r--r--arch/arm/mach-pxa/pxa95x.c1
-rw-r--r--arch/arm/mach-sa1100/clock.c91
-rw-r--r--arch/arm/mach-sa1100/generic.c20
-rw-r--r--drivers/rtc/Kconfig2
-rw-r--r--drivers/rtc/rtc-sa1100.c300
12 files changed, 297 insertions, 144 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b8c69726839..34d13ff3901 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -741,7 +741,7 @@ config ARCH_SA1100
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_CLOCKEVENTS
- select HAVE_CLK
+ select CLKDEV_LOOKUP
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 5bc13121eac..18fd177073f 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -415,9 +415,29 @@ static struct resource pxa_rtc_resources[] = {
},
};
+static struct resource sa1100_rtc_resources[] = {
+ [0] = {
+ .start = 0x40900000,
+ .end = 0x409000ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC1Hz,
+ .end = IRQ_RTC1Hz,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTCAlrm,
+ .end = IRQ_RTCAlrm,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
struct platform_device sa1100_device_rtc = {
.name = "sa1100-rtc",
.id = -1,
+ .num_resources = ARRAY_SIZE(sa1100_rtc_resources),
+ .resource = sa1100_rtc_resources,
};
struct platform_device pxa_device_rtc = {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 8a775f631c5..adf058fa97e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -210,6 +210,7 @@ static struct clk_lookup pxa25x_clkregs[] = {
INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
static struct clk_lookup pxa25x_hwuart_clkreg =
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6c49e66057e..180bd8675d4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -231,6 +231,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 40bb16501d8..0388eda7878 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -89,6 +89,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
static struct clk_lookup common_clkregs[] = {
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 8d614ecd8e9..d487e1ff4c9 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -83,6 +83,7 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
static struct clk_lookup pxa320_clkregs[] = {
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
};
static int __init pxa320_init(void)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 4f402afa660..f107c71c758 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -67,6 +67,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index d082a583df7..fccc644702e 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -217,6 +217,7 @@ static struct clk_lookup pxa95x_clkregs[] = {
INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index dab3c6347a8..d6df9f6c9f7 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,17 +11,39 @@
#include <linux/clk.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
#include <mach/hardware.h>
-/*
- * Very simple clock implementation - we only have one clock to deal with.
- */
+struct clkops {
+ void (*enable)(struct clk *);
+ void (*disable)(struct clk *);
+ unsigned long (*getrate)(struct clk *);
+};
+
struct clk {
+ const struct clkops *ops;
+ unsigned long rate;
unsigned int enabled;
};
-static void clk_gpio27_enable(void)
+#define INIT_CLKREG(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
+#define DEFINE_CLK(_name, _ops, _rate) \
+struct clk clk_##_name = { \
+ .ops = _ops, \
+ .rate = _rate, \
+ }
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+static void clk_gpio27_enable(struct clk *clk)
{
/*
* First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111:
@@ -32,38 +54,22 @@ static void clk_gpio27_enable(void)
TUCR = TUCR_3_6864MHz;
}
-static void clk_gpio27_disable(void)
+static void clk_gpio27_disable(struct clk *clk)
{
TUCR = 0;
GPDR &= ~GPIO_32_768kHz;
GAFR &= ~GPIO_32_768kHz;
}
-static struct clk clk_gpio27;
-
-static DEFINE_SPINLOCK(clocks_lock);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- const char *devname = dev_name(dev);
-
- return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
int clk_enable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clocks_lock, flags);
if (clk->enabled++ == 0)
- clk_gpio27_enable();
+ clk->ops->enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
+
return 0;
}
EXPORT_SYMBOL(clk_enable);
@@ -76,13 +82,48 @@ void clk_disable(struct clk *clk)
spin_lock_irqsave(&clocks_lock, flags);
if (--clk->enabled == 0)
- clk_gpio27_disable();
+ clk->ops->disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
- return 3686400;
+ unsigned long rate;
+
+ rate = clk->rate;
+ if (clk->ops->getrate)
+ rate = clk->ops->getrate(clk);
+
+ return rate;
}
EXPORT_SYMBOL(clk_get_rate);
+
+const struct clkops clk_gpio27_ops = {
+ .enable = clk_gpio27_enable,
+ .disable = clk_gpio27_disable,
+};
+
+static void clk_dummy_enable(struct clk *clk) { }
+static void clk_dummy_disable(struct clk *clk) { }
+
+const struct clkops clk_dummy_ops = {
+ .enable = clk_dummy_enable,
+ .disable = clk_dummy_disable,
+};
+
+static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400);
+static DEFINE_CLK(dummy, &clk_dummy_ops, 0);
+
+static struct clk_lookup sa11xx_clkregs[] = {
+ INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL),
+ INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
+};
+
+static int __init sa11xx_clk_init(void)
+{
+ clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs));
+ return 0;
+}
+
+postcore_initcall(sa11xx_clk_init);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5fa5ae1f39e..3eff179d4fd 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -334,9 +334,29 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
sa11x0_register_device(&sa11x0ir_device, irda);
}
+static struct resource sa11x0rtc_resources[] = {
+ [0] = {
+ .start = 0x90010000,
+ .end = 0x900100ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC1Hz,
+ .end = IRQ_RTC1Hz,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = IRQ_RTCAlrm,
+ .end = IRQ_RTCAlrm,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct platform_device sa11x0rtc_device = {
.name = "sa1100-rtc",
.id = -1,
+ .resource = sa11x0rtc_resources,
+ .num_resources = ARRAY_SIZE(sa11x0rtc_resources),
};
static struct platform_device *sa11x0_devices[] __initdata = {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 53eb4e55b28..877cf6fdcf2 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -774,7 +774,7 @@ config RTC_DRV_EP93XX
config RTC_DRV_SA1100
tristate "SA11x0/PXA2xx"
- depends on ARCH_SA1100 || ARCH_PXA
+ depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP
help
If you say Y here you will get access to the real time clock
built into your SA11x0 or PXA2xx CPU.
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 0b40bb88a88..fc1ffe97fca 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -27,35 +27,42 @@
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
-#include <linux/string.h>
#include <linux/pm.h>
-#include <linux/bitops.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
-#ifdef CONFIG_ARCH_PXA
-#include <mach/regs-rtc.h>
-#include <mach/regs-ost.h>
-#endif
-
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
-
-static const unsigned long RTC_FREQ = 1024;
-static struct rtc_time rtc_alarm;
-static DEFINE_SPINLOCK(sa1100_rtc_lock);
-
-static inline int rtc_periodic_alarm(struct rtc_time *tm)
-{
- return (tm->tm_year == -1) ||
- ((unsigned)tm->tm_mon >= 12) ||
- ((unsigned)(tm->tm_mday - 1) >= 31) ||
- ((unsigned)tm->tm_hour > 23) ||
- ((unsigned)tm->tm_min > 59) ||
- ((unsigned)tm->tm_sec > 59);
-}
-
+#define RTC_FREQ 1024
+
+#define RCNR 0x00 /* RTC Count Register */
+#define RTAR 0x04 /* RTC Alarm Register */
+#define RTSR 0x08 /* RTC Status Register */
+#define RTTR 0x0c /* RTC Timer Trim Register */
+
+#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
+#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
+#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
+#define RTSR_AL (1 << 0) /* RTC alarm detected */
+
+#define rtc_readl(sa1100_rtc, reg) \
+ readl_relaxed((sa1100_rtc)->base + (reg))
+#define rtc_writel(sa1100_rtc, reg, value) \
+ writel_relaxed((value), (sa1100_rtc)->base + (reg))
+
+struct sa1100_rtc {
+ struct resource *ress;
+ void __iomem *base;
+ struct clk *clk;
+ int irq_1Hz;
+ int irq_Alrm;
+ struct rtc_device *rtc;
+ spinlock_t lock; /* Protects this structure */
+};
/*
* Calculate the next alarm time given the requested alarm time mask
* and the current time.
@@ -83,46 +90,26 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
}
}
-static int rtc_update_alarm(struct rtc_time *alrm)
-{
- struct rtc_time alarm_tm, now_tm;
- unsigned long now, time;
- int ret;
-
- do {
- now = RCNR;
- rtc_time_to_tm(now, &now_tm);
- rtc_next_alarm_time(&alarm_tm, &now_tm, alrm);
- ret = rtc_tm_to_time(&alarm_tm, &time);
- if (ret != 0)
- break;
-
- RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL);
- RTAR = time;
- } while (now != RCNR);
-
- return ret;
-}
-
static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = to_platform_device(dev_id);
- struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
unsigned int rtsr;
unsigned long events = 0;
- spin_lock(&sa1100_rtc_lock);
+ spin_lock(&sa1100_rtc->lock);
- rtsr = RTSR;
/* clear interrupt sources */
- RTSR = 0;
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
+ rtc_writel(sa1100_rtc, RTSR, 0);
+
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_probe(). */
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
/* This is the original code, before there was the if test
* above. This code does not clear interrupts that were not
* enabled. */
- RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+ rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
} else {
/* For some reason, it is possible to enter this routine
* without interruptions enabled, it has been tested with
@@ -131,13 +118,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
* This situation leads to an infinite "loop" of interrupt
* routine calling and as a result the processor seems to
* lock on its first call to open(). */
- RTSR = RTSR_AL | RTSR_HZ;
+ rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
}
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
rtsr &= ~RTSR_ALE;
- RTSR = rtsr & (RTSR_ALE | RTSR_HZE);
+ rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
/* update irq data & counter */
if (rtsr & RTSR_AL)
@@ -145,91 +132,100 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
if (rtsr & RTSR_HZ)
events |= RTC_UF | RTC_IRQF;
- rtc_update_irq(rtc, 1, events);
+ rtc_update_irq(sa1100_rtc->rtc, 1, events);
- if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm))
- rtc_update_alarm(&rtc_alarm);
-
- spin_unlock(&sa1100_rtc_lock);
+ spin_unlock(&sa1100_rtc->lock);
return IRQ_HANDLED;
}
static int sa1100_rtc_open(struct device *dev)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
int ret;
- struct platform_device *plat_dev = to_platform_device(dev);
- struct rtc_device *rtc = platform_get_drvdata(plat_dev);
- ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
- "rtc 1Hz", dev);
+ ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
+ IRQF_DISABLED, "rtc 1Hz", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
+ dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
goto fail_ui;
}
- ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
- "rtc Alrm", dev);
+ ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
+ IRQF_DISABLED, "rtc Alrm", dev);
if (ret) {
- dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
+ dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
goto fail_ai;
}
- rtc->max_user_freq = RTC_FREQ;
- rtc_irq_set_freq(rtc, NULL, RTC_FREQ);
+ sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
+ rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
return 0;
fail_ai:
- free_irq(IRQ_RTC1Hz, dev);
+ free_irq(sa1100_rtc->irq_1Hz, dev);
fail_ui:
return ret;
}
static void sa1100_rtc_release(struct device *dev)
{
- spin_lock_irq(&sa1100_rtc_lock);
- RTSR = 0;
- OIER &= ~OIER_E1;
- OSSR = OSSR_M1;
- spin_unlock_irq(&sa1100_rtc_lock);
-
- free_irq(IRQ_RTCAlrm, dev);
- free_irq(IRQ_RTC1Hz, dev);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
+ spin_lock_irq(&sa1100_rtc->lock);
+ rtc_writel(sa1100_rtc, RTSR, 0);
+ spin_unlock_irq(&sa1100_rtc->lock);
+
+ free_irq(sa1100_rtc->irq_Alrm, dev);
+ free_irq(sa1100_rtc->irq_1Hz, dev);
}
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
{
- spin_lock_irq(&sa1100_rtc_lock);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ unsigned int rtsr;
+
+ spin_lock_irq(&sa1100_rtc->lock);
+
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
if (enabled)
- RTSR |= RTSR_ALE;
+ rtsr |= RTSR_ALE;
else
- RTSR &= ~RTSR_ALE;
- spin_unlock_irq(&sa1100_rtc_lock);
+ rtsr &= ~RTSR_ALE;
+ rtc_writel(sa1100_rtc, RTSR, rtsr);
+
+ spin_unlock_irq(&sa1100_rtc->lock);
return 0;
}
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- rtc_time_to_tm(RCNR, tm);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
+ rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
return 0;
}
static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
unsigned long time;
int ret;
ret = rtc_tm_to_time(tm, &time);
if (ret == 0)
- RCNR = time;
+ rtc_writel(sa1100_rtc, RCNR, time);
return ret;
}
static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- u32 rtsr;
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ unsigned long time;
+ unsigned int rtsr;
- memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time));
- rtsr = RTSR;
+ time = rtc_readl(sa1100_rtc, RCNR);
+ rtc_time_to_tm(time, &alrm->time);
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
return 0;
@@ -237,26 +233,39 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
- int ret;
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ struct rtc_time now_tm, alarm_tm;
+ unsigned long time, alarm;
+ unsigned int rtsr;
- spin_lock_irq(&sa1100_rtc_lock);
- ret = rtc_update_alarm(&alrm->time);
- if (ret == 0) {
- if (alrm->enabled)
- RTSR |= RTSR_ALE;
- else
- RTSR &= ~RTSR_ALE;
- }
- spin_unlock_irq(&sa1100_rtc_lock);
+ spin_lock_irq(&sa1100_rtc->lock);
- return ret;
+ time = rtc_readl(sa1100_rtc, RCNR);
+ rtc_time_to_tm(time, &now_tm);
+ rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
+ rtc_tm_to_time(&alarm_tm, &alarm);
+ rtc_writel(sa1100_rtc, RTAR, alarm);
+
+ rtsr = rtc_readl(sa1100_rtc, RTSR);
+ if (alrm->enabled)
+ rtsr |= RTSR_ALE;
+ else
+ rtsr &= ~RTSR_ALE;
+ rtc_writel(sa1100_rtc, RTSR, rtsr);
+
+ spin_unlock_irq(&sa1100_rtc->lock);
+
+ return 0;
}
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
- seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR);
- seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR);
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+ seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
+ rtc_readl(sa1100_rtc, RTTR));
+ seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
+ rtc_readl(sa1100_rtc, RTSR));
return 0;
}
@@ -273,7 +282,51 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
static int sa1100_rtc_probe(struct platform_device *pdev)
{
- struct rtc_device *rtc;
+ struct sa1100_rtc *sa1100_rtc;
+ unsigned int rttr;
+ int ret;
+
+ sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
+ if (!sa1100_rtc)
+ return -ENOMEM;
+
+ spin_lock_init(&sa1100_rtc->lock);
+ platform_set_drvdata(pdev, sa1100_rtc);
+
+ ret = -ENXIO;
+ sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!sa1100_rtc->ress) {
+ dev_err(&pdev->dev, "No I/O memory resource defined\n");
+ goto err_ress;
+ }
+
+ sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
+ if (sa1100_rtc->irq_1Hz < 0) {
+ dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
+ goto err_ress;
+ }
+ sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
+ if (sa1100_rtc->irq_Alrm < 0) {
+ dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
+ goto err_ress;
+ }
+
+ ret = -ENOMEM;
+ sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
+ resource_size(sa1100_rtc->ress));
+ if (!sa1100_rtc->base) {
+ dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
+ goto err_map;
+ }
+
+ sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(sa1100_rtc->clk)) {
+ dev_err(&pdev->dev, "failed to find rtc clock source\n");
+ ret = PTR_ERR(sa1100_rtc->clk);
+ goto err_clk;
+ }
+ clk_prepare(sa1100_rtc->clk);
+ clk_enable(sa1100_rtc->clk);
/*
* According to the manual we should be able to let RTTR be zero
@@ -282,24 +335,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
* If the clock divider is uninitialized then reset it to the
* default value to get the 1Hz clock.
*/
- if (RTTR == 0) {
- RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
- dev_warn(&pdev->dev, "warning: "
- "initializing default clock divider/trim value\n");
+ if (rtc_readl(sa1100_rtc, RTTR) == 0) {
+ rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
+ rtc_writel(sa1100_rtc, RTTR, rttr);
+ dev_warn(&pdev->dev, "warning: initializing default clock"
+ " divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
- RCNR = 0;
+ rtc_writel(sa1100_rtc, RCNR, 0);
}
device_init_wakeup(&pdev->dev, 1);
- rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
- THIS_MODULE);
-
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- platform_set_drvdata(pdev, rtc);
-
+ sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
+ &sa1100_rtc_ops, THIS_MODULE);
+ if (IS_ERR(sa1100_rtc->rtc)) {
+ dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
+ ret);
+ goto err_rtc_reg;
+ }
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_interrupt().
*
@@ -322,33 +375,46 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
*
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
* the corresponding bits in RTSR. */
- RTSR = RTSR_AL | RTSR_HZ;
+ rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
return 0;
+
+err_rtc_reg:
+err_clk:
+ iounmap(sa1100_rtc->base);
+err_ress:
+err_map:
+ kfree(sa1100_rtc);
+ return ret;
}
static int sa1100_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(pdev);
-
- if (rtc)
- rtc_device_unregister(rtc);
+ struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
+ rtc_device_unregister(sa1100_rtc->rtc);
+ clk_disable(sa1100_rtc->clk);
+ clk_unprepare(sa1100_rtc->clk);
+ iounmap(sa1100_rtc->base);
return 0;
}
#ifdef CONFIG_PM
static int sa1100_rtc_suspend(struct device *dev)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
if (device_may_wakeup(dev))
- enable_irq_wake(IRQ_RTCAlrm);
+ enable_irq_wake(sa1100_rtc->irq_Alrm);
return 0;
}
static int sa1100_rtc_resume(struct device *dev)
{
+ struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
+
if (device_may_wakeup(dev))
- disable_irq_wake(IRQ_RTCAlrm);
+ disable_irq_wake(sa1100_rtc->irq_Alrm);
return 0;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-19 04:43:38 +0000