summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/char/watchdog/Kconfig93
-rw-r--r--drivers/char/watchdog/Makefile7
-rw-r--r--drivers/char/watchdog/i6300esb.c527
-rw-r--r--drivers/char/watchdog/ibmasr.c405
-rw-r--r--drivers/char/watchdog/mv64x60_wdt.c252
-rw-r--r--drivers/char/watchdog/pcwd_pci.c44
-rw-r--r--drivers/char/watchdog/s3c2410_wdt.c2
-rw-r--r--drivers/char/watchdog/sbc8360.c414
-rw-r--r--drivers/char/watchdog/w83977f_wdt.c543
-rw-r--r--include/asm-ppc/mv64x60.h8
10 files changed, 2252 insertions, 43 deletions
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig
index fa789ea36bb..344001b45af 100644
--- a/drivers/char/watchdog/Kconfig
+++ b/drivers/char/watchdog/Kconfig
@@ -84,6 +84,17 @@ config 977_WATCHDOG
Not sure? It's safe to say N.
+config IXP2000_WATCHDOG
+ tristate "IXP2000 Watchdog"
+ depends on WATCHDOG && ARCH_IXP2000
+ help
+ Say Y here if to include support for the watchdog timer
+ in the Intel IXP2000(2400, 2800, 2850) network processors.
+ This driver can be built as a module by choosing M. The module
+ will be called ixp2000_wdt.
+
+ Say N if you are unsure.
+
config IXP4XX_WATCHDOG
tristate "IXP4xx Watchdog"
depends on WATCHDOG && ARCH_IXP4XX
@@ -100,17 +111,6 @@ config IXP4XX_WATCHDOG
Say N if you are unsure.
-config IXP2000_WATCHDOG
- tristate "IXP2000 Watchdog"
- depends on WATCHDOG && ARCH_IXP2000
- help
- Say Y here if to include support for the watchdog timer
- in the Intel IXP2000(2400, 2800, 2850) network processors.
- This driver can be built as a module by choosing M. The module
- will be called ixp2000_wdt.
-
- Say N if you are unsure.
-
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
depends on WATCHDOG && ARCH_S3C2410
@@ -233,6 +233,16 @@ config IB700_WDT
Most people will say N.
+config IBMASR
+ tristate "IBM Automatic Server Restart"
+ depends on WATCHDOG && X86
+ help
+ This is the driver for the IBM Automatic Server Restart watchdog
+ timer builtin into some eServer xSeries machines.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmasr.
+
config WAFER_WDT
tristate "ICP Wafer 5823 Single Board Computer Watchdog"
depends on WATCHDOG && X86
@@ -243,6 +253,16 @@ config WAFER_WDT
To compile this driver as a module, choose M here: the
module will be called wafer5823wdt.
+config I6300ESB_WDT
+ tristate "Intel 6300ESB Timer/Watchdog"
+ depends on WATCHDOG && X86 && PCI
+ ---help---
+ Hardware driver for the watchdog timer built into the Intel
+ 6300ESB controller hub.
+
+ To compile this driver as a module, choose M here: the
+ module will be called i6300esb.
+
config I8XX_TCO
tristate "Intel i8xx TCO Timer/Watchdog"
depends on WATCHDOG && (X86 || IA64) && PCI
@@ -298,6 +318,19 @@ config 60XX_WDT
You can compile this driver directly into the kernel, or use
it as a module. The module will be called sbc60xxwdt.
+config SBC8360_WDT
+ tristate "SBC8360 Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+
+ This is the driver for the hardware watchdog on the SBC8360 Single
+ Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbc8360.ko.
+
+ Most people will say N.
+
config CPU5_WDT
tristate "SMA CPU5 Watchdog"
depends on WATCHDOG && X86
@@ -336,6 +369,19 @@ config W83877F_WDT
Most people will say N.
+config W83977F_WDT
+ tristate "W83977F (PCM-5335) Watchdog Timer"
+ depends on WATCHDOG && X86
+ ---help---
+ This is the driver for the hardware watchdog on the W83977F I/O chip
+ as used in AAEON's PCM-5335 SBC (and likely others). This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83977f_wdt.
+
config MACHZ_WDT
tristate "ZF MachZ Watchdog"
depends on WATCHDOG && X86
@@ -355,6 +401,10 @@ config 8xx_WDT
tristate "MPC8xx Watchdog Timer"
depends on WATCHDOG && 8xx
+config MV64X60_WDT
+ tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
+ depends on WATCHDOG && MV64X60
+
config BOOKE_WDT
tristate "PowerPC Book-E Watchdog Timer"
depends on WATCHDOG && (BOOKE || 4xx)
@@ -362,6 +412,17 @@ config BOOKE_WDT
Please see Documentation/watchdog/watchdog-api.txt for
more information.
+# PPC64 Architecture
+
+config WATCHDOG_RTAS
+ tristate "RTAS watchdog"
+ depends on WATCHDOG && PPC_RTAS
+ help
+ This driver adds watchdog support for the RTAS watchdog.
+
+ To compile this driver as a module, choose M here. The module
+ will be called wdrtas.
+
# MIPS Architecture
config INDYDOG
@@ -430,16 +491,6 @@ config WATCHDOG_RIO
machines. The watchdog timeout period is normally one minute but
can be changed with a boot-time parameter.
-# ppc64 RTAS watchdog
-config WATCHDOG_RTAS
- tristate "RTAS watchdog"
- depends on WATCHDOG && PPC_RTAS
- help
- This driver adds watchdog support for the RTAS watchdog.
-
- To compile this driver as a module, choose M here. The module
- will be called wdrtas.
-
#
# ISA-based Watchdog Cards
#
diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile
index bc6f5fe88c8..cfd0a398771 100644
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -39,22 +39,27 @@ obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_IB700_WDT) += ib700wdt.o
+obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
+obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
# PowerPC Architecture
obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
+obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
# PPC64 Architecture
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
-obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
# MIPS Architecture
obj-$(CONFIG_INDYDOG) += indydog.o
diff --git a/drivers/char/watchdog/i6300esb.c b/drivers/char/watchdog/i6300esb.c
new file mode 100644
index 00000000000..93785f13242
--- /dev/null
+++ b/drivers/char/watchdog/i6300esb.c
@@ -0,0 +1,527 @@
+/*
+ * i6300esb: Watchdog timer driver for Intel 6300ESB chipset
+ *
+ * (c) Copyright 2004 Google Inc.
+ * (c) Copyright 2005 David Härdeman <david@2gen.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * based on i810-tco.c which is in turn based on softdog.c
+ *
+ * The timer is implemented in the following I/O controller hubs:
+ * (See the intel documentation on http://developer.intel.com.)
+ * 6300ESB chip : document number 300641-003
+ *
+ * 2004YYZZ Ross Biro
+ * Initial version 0.01
+ * 2004YYZZ Ross Biro
+ * Version 0.02
+ * 20050210 David Härdeman <david@2gen.com>
+ * Ported driver to kernel 2.6
+ */
+
+/*
+ * Includes, defines, variables, module parameters, ...
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/* Module and version information */
+#define ESB_VERSION "0.03"
+#define ESB_MODULE_NAME "i6300ESB timer"
+#define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
+#define PFX ESB_MODULE_NAME ": "
+
+/* PCI configuration registers */
+#define ESB_CONFIG_REG 0x60 /* Config register */
+#define ESB_LOCK_REG 0x68 /* WDT lock register */
+
+/* Memory mapped registers */
+#define ESB_TIMER1_REG BASEADDR + 0x00 /* Timer1 value after each reset */
+#define ESB_TIMER2_REG BASEADDR + 0x04 /* Timer2 value after each reset */
+#define ESB_GINTSR_REG BASEADDR + 0x08 /* General Interrupt Status Register */
+#define ESB_RELOAD_REG BASEADDR + 0x0c /* Reload register */
+
+/* Lock register bits */
+#define ESB_WDT_FUNC ( 0x01 << 2 ) /* Watchdog functionality */
+#define ESB_WDT_ENABLE ( 0x01 << 1 ) /* Enable WDT */
+#define ESB_WDT_LOCK ( 0x01 << 0 ) /* Lock (nowayout) */
+
+/* Config register bits */
+#define ESB_WDT_REBOOT ( 0x01 << 5 ) /* Enable reboot on timeout */
+#define ESB_WDT_FREQ ( 0x01 << 2 ) /* Decrement frequency */
+#define ESB_WDT_INTTYPE ( 0x11 << 0 ) /* Interrupt type on timer1 timeout */
+
+/* Reload register bits */
+#define ESB_WDT_RELOAD ( 0x01 << 8 ) /* prevent timeout */
+
+/* Magic constants */
+#define ESB_UNLOCK1 0x80 /* Step 1 to unlock reset registers */
+#define ESB_UNLOCK2 0x86 /* Step 2 to unlock reset registers */
+
+/* internal variables */
+static void __iomem *BASEADDR;
+static spinlock_t esb_lock; /* Guards the hardware */
+static unsigned long timer_alive;
+static struct pci_dev *esb_pci;
+static unsigned short triggered; /* The status of the watchdog upon boot */
+static char esb_expect_close;
+
+/* module parameters */
+#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (1<heartbeat<2*1023) */
+static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (1<heartbeat<2046, default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Some i6300ESB specific functions
+ */
+
+/*
+ * Prepare for reloading the timer by unlocking the proper registers.
+ * This is performed by first writing 0x80 followed by 0x86 to the
+ * reload register. After this the appropriate registers can be written
+ * to once before they need to be unlocked again.
+ */
+static inline void esb_unlock_registers(void) {
+ writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
+ writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
+}
+
+static void esb_timer_start(void)
+{
+ u8 val;
+
+ /* Enable or Enable + Lock? */
+ val = 0x02 | (nowayout ? 0x01 : 0x00);
+
+ pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
+}
+
+static int esb_timer_stop(void)
+{
+ u8 val;
+
+ spin_lock(&esb_lock);
+ /* First, reset timers as suggested by the docs */
+ esb_unlock_registers();
+ writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+ /* Then disable the WDT */
+ pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
+ pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
+ spin_unlock(&esb_lock);
+
+ /* Returns 0 if the timer was disabled, non-zero otherwise */
+ return (val & 0x01);
+}
+
+static void esb_timer_keepalive(void)
+{
+ spin_lock(&esb_lock);
+ esb_unlock_registers();
+ writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+ /* FIXME: Do we need to flush anything here? */
+ spin_unlock(&esb_lock);
+}
+
+static int esb_timer_set_heartbeat(int time)
+{
+ u32 val;
+
+ if (time < 0x1 || time > (2 * 0x03ff))
+ return -EINVAL;
+
+ spin_lock(&esb_lock);
+
+ /* We shift by 9, so if we are passed a value of 1 sec,
+ * val will be 1 << 9 = 512, then write that to two
+ * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
+ */
+ val = time << 9;
+
+ /* Write timer 1 */
+ esb_unlock_registers();
+ writel(val, ESB_TIMER1_REG);
+
+ /* Write timer 2 */
+ esb_unlock_registers();
+ writel(val, ESB_TIMER2_REG);
+
+ /* Reload */
+ esb_unlock_registers();
+ writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
+
+ /* FIXME: Do we need to flush everything out? */
+
+ /* Done */
+ heartbeat = time;
+ spin_unlock(&esb_lock);
+ return 0;
+}
+
+static int esb_timer_read (void)
+{
+ u32 count;
+
+ /* This isn't documented, and doesn't take into
+ * acount which stage is running, but it looks
+ * like a 20 bit count down, so we might as well report it.
+ */
+ pci_read_config_dword(esb_pci, 0x64, &count);
+ return (int)count;
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static int esb_open (struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &timer_alive))
+ return -EBUSY;
+
+ /* Reload and activate timer */
+ esb_timer_keepalive ();
+ esb_timer_start ();
+
+ return nonseekable_open(inode, file);
+}
+
+static int esb_release (struct inode *inode, struct file *file)
+{
+ /* Shut off the timer. */
+ if (esb_expect_close == 42) {
+ esb_timer_stop ();
+ } else {
+ printk(KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n");
+ esb_timer_keepalive ();
+ }
+ clear_bit(0, &timer_alive);
+ esb_expect_close = 0;
+ return 0;
+}
+
+static ssize_t esb_write (struct file *file, const char __user *data,
+ size_t len, loff_t * ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* note: just in case someone wrote the magic character
+ * five months ago... */
+ esb_expect_close = 0;
+
+ /* scan to see whether or not we got the magic character */
+ for (i = 0; i != len; i++) {
+ char c;
+ if(get_user(c, data+i))
+ return -EFAULT;
+ if (c == 'V')
+ esb_expect_close = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ esb_timer_keepalive ();
+ }
+ return len;
+}
+
+static int esb_ioctl (struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int new_options, retval = -EINVAL;
+ int new_heartbeat;
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = ESB_MODULE_NAME,
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident,
+ sizeof (ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ return put_user (esb_timer_read(), p);
+
+ case WDIOC_GETBOOTSTATUS:
+ return put_user (triggered, p);
+
+ case WDIOC_KEEPALIVE:
+ esb_timer_keepalive ();
+ return 0;
+
+ case WDIOC_SETOPTIONS:
+ {
+ if (get_user (new_options, p))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ esb_timer_stop ();
+ retval = 0;
+ }
+
+ if (new_options & WDIOS_ENABLECARD) {
+ esb_timer_keepalive ();
+ esb_timer_start ();
+ retval = 0;
+ }
+
+ return retval;
+ }
+
+ case WDIOC_SETTIMEOUT:
+ {
+ if (get_user(new_heartbeat, p))
+ return -EFAULT;
+
+ if (esb_timer_set_heartbeat(new_heartbeat))
+ return -EINVAL;
+
+ esb_timer_keepalive ();
+ /* Fall */
+ }
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(heartbeat, p);
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+/*
+ * Notify system
+ */
+
+static int esb_notify_sys (struct notifier_block *this, unsigned long code, void *unused)
+{
+ if (code==SYS_DOWN || code==SYS_HALT) {
+ /* Turn the WDT off */
+ esb_timer_stop ();
+ }
+
+ return NOTIFY_DONE;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static struct file_operations esb_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = esb_write,
+ .ioctl = esb_ioctl,
+ .open = esb_open,
+ .release = esb_release,
+};
+
+static struct miscdevice esb_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &esb_fops,
+};
+
+static struct notifier_block esb_notifier = {
+ .notifier_call = esb_notify_sys,
+};
+
+/*
+ * Data for PCI driver interface
+ *
+ * This data only exists for exporting the supported
+ * PCI ids via MODULE_DEVICE_TABLE. We do not actually
+ * register a pci_driver, because someone else might one day
+ * want to register another driver on the same PCI id.
+ */
+static struct pci_device_id esb_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
+ { 0, }, /* End of list */
+};
+MODULE_DEVICE_TABLE (pci, esb_pci_tbl);
+
+/*
+ * Init & exit routines
+ */
+
+static unsigned char __init esb_getdevice (void)
+{
+ u8 val1;
+ unsigned short val2;
+
+ struct pci_dev *dev = NULL;
+ /*
+ * Find the PCI device
+ */
+
+ for_each_pci_dev(dev) {
+ if (pci_match_id(esb_pci_tbl, dev)) {
+ esb_pci = dev;
+ break;
+ }
+ }
+
+ if (esb_pci) {
+ if (pci_enable_device(esb_pci)) {
+ printk (KERN_ERR PFX "failed to enable device\n");
+ goto err_devput;
+ }
+
+ if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
+ printk (KERN_ERR PFX "failed to request region\n");
+ goto err_disable;
+ }
+
+ BASEADDR = ioremap(pci_resource_start(esb_pci, 0),
+ pci_resource_len(esb_pci, 0));
+ if (BASEADDR == NULL) {
+ /* Something's wrong here, BASEADDR has to be set */
+ printk (KERN_ERR PFX "failed to get BASEADDR\n");
+ goto err_release;
+ }
+
+ /*
+ * The watchdog has two timers, it can be setup so that the
+ * expiry of timer1 results in an interrupt and the expiry of
+ * timer2 results in a reboot. We set it to not generate
+ * any interrupts as there is not much we can do with it
+ * right now.
+ *
+ * We also enable reboots and set the timer frequency to
+ * the PCI clock divided by 2^15 (approx 1KHz).
+ */
+ pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);
+
+ /* Check that the WDT isn't already locked */
+ pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
+ if (val1 & ESB_WDT_LOCK)
+ printk (KERN_WARNING PFX "nowayout already set\n");
+
+ /* Set the timer to watchdog mode and disable it for now */
+ pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);
+
+ /* Check if the watchdog was previously triggered */
+ esb_unlock_registers();
+ val2 = readw(ESB_RELOAD_REG);
+ triggered = (val2 & (0x01 << 9) >> 9);
+
+ /* Reset trigger flag and timers */
+ esb_unlock_registers();
+ writew((0x11 << 8), ESB_RELOAD_REG);
+
+ /* Done */
+ return 1;
+
+err_release:
+ pci_release_region(esb_pci, 0);
+err_disable:
+ pci_disable_device(esb_pci);
+err_devput:
+ pci_dev_put(esb_pci);
+ }
+ return 0;
+}
+
+static int __init watchdog_init (void)
+{
+ int ret;
+
+ spin_lock_init(&esb_lock);
+
+ /* Check whether or not the hardware watchdog is there */
+ if (!esb_getdevice () || esb_pci == NULL)
+ return -ENODEV;
+
+ /* Check that the heartbeat value is within it's range ; if not reset to the default */
+ if (esb_timer_set_heartbeat (heartbeat)) {
+ esb_timer_set_heartbeat (WATCHDOG_HEARTBEAT);
+ printk(KERN_INFO PFX "heartbeat value must be 1<heartbeat<2046, using %d\n",
+ heartbeat);
+ }
+
+ ret = register_reboot_notifier(&esb_notifier);
+ if (ret != 0) {
+ printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ ret);
+ goto err_unmap;
+ }
+
+ ret = misc_register(&esb_miscdev);
+ if (ret != 0) {
+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto err_notifier;
+ }
+
+ esb_timer_stop ();
+
+ printk (KERN_INFO PFX "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
+ BASEADDR, heartbeat, nowayout);
+
+ return 0;
+
+err_notifier:
+ unregister_reboot_notifier(&esb_notifier);
+err_unmap:
+ iounmap(BASEADDR);
+/* err_release: */
+ pci_release_region(esb_pci, 0);
+/* err_disable: */
+ pci_disable_device(esb_pci);
+/* err_devput: */
+ pci_dev_put(esb_pci);
+ return ret;
+}
+
+static void __exit watchdog_cleanup (void)
+{
+ /* Stop the timer before we leave */
+ if (!nowayout)
+ esb_timer_stop ();
+
+ /* Deregister */
+ misc_deregister(&esb_miscdev);
+ unregister_reboot_notifier(&esb_notifier);
+ iounmap(BASEADDR);
+ pci_release_region(esb_pci, 0);
+ pci_disable_device(esb_pci);
+ pci_dev_put(esb_pci);
+}
+
+module_init(watchdog_init);
+module_exit(watchdog_cleanup);
+
+MODULE_AUTHOR("Ross Biro and David Härdeman");
+MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/ibmasr.c b/drivers/char/watchdog/ibmasr.c
new file mode 100644
index 00000000000..294c474ae48
--- /dev/null
+++ b/drivers/char/watchdog/ibmasr.c
@@ -0,0 +1,405 @@
+/*
+ * IBM Automatic Server Restart driver.
+ *
+ * Copyright (c) 2005 Andrey Panin <pazke@donpac.ru>
+ *
+ * Based on driver written by Pete Reynolds.
+ * Copyright (c) IBM Corporation, 1998-2004.
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU Public License, incorporated herein by reference.
+ */
+
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/timer.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/dmi.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+
+enum {
+ ASMTYPE_UNKNOWN,
+ ASMTYPE_TOPAZ,
+ ASMTYPE_JASPER,
+ ASMTYPE_PEARL,
+ ASMTYPE_JUNIPER,
+ ASMTYPE_SPRUCE,
+};
+
+#define PFX "ibmasr: "
+
+#define TOPAZ_ASR_REG_OFFSET 4
+#define TOPAZ_ASR_TOGGLE 0x40
+#define TOPAZ_ASR_DISABLE 0x80
+
+/* PEARL ASR S/W REGISTER SUPERIO PORT ADDRESSES */
+#define PEARL_BASE 0xe04
+#define PEARL_WRITE 0xe06
+#define PEARL_READ 0xe07
+
+#define PEARL_ASR_DISABLE_MASK 0x80 /* bit 7: disable = 1, enable = 0 */
+#define PEARL_ASR_TOGGLE_MASK 0x40 /* bit 6: 0, then 1, then 0 */
+
+/* JASPER OFFSET FROM SIO BASE ADDR TO ASR S/W REGISTERS. */
+#define JASPER_ASR_REG_OFFSET 0x38
+
+#define JASPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1, enable = 0 */
+#define JASPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
+
+#define JUNIPER_BASE_ADDRESS 0x54b /* Base address of Juniper ASR */
+#define JUNIPER_ASR_DISABLE_MASK 0x01 /* bit 0: disable = 1 enable = 0 */
+#define JUNIPER_ASR_TOGGLE_MASK 0x02 /* bit 1: 0, then 1, then 0 */
+
+#define SPRUCE_BASE_ADDRESS 0x118e /* Base address of Spruce ASR */
+#define SPRUCE_ASR_DISABLE_MASK 0x01 /* bit 1: disable = 1 enable = 0 */
+#define SPRUCE_ASR_TOGGLE_MASK 0x02 /* bit 0: 0, then 1, then 0 */
+
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+static unsigned long asr_is_open;
+static char asr_expect_close;
+
+static unsigned int asr_type, asr_base, asr_length;
+static unsigned int asr_read_addr, asr_write_addr;
+static unsigned char asr_toggle_mask, asr_disable_mask;
+
+static void asr_toggle(void)
+{
+ unsigned char reg = inb(asr_read_addr);
+
+ outb(reg & ~asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+
+ outb(reg | asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+
+ outb(reg & ~asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+}
+
+static void asr_enable(void)
+{
+ unsigned char reg;
+
+ if (asr_type == ASMTYPE_TOPAZ) {
+ /* asr_write_addr == asr_read_addr */
+ reg = inb(asr_read_addr);
+ outb(reg & ~(TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE),
+ asr_read_addr);
+ } else {
+ /*
+ * First make sure the hardware timer is reset by toggling
+ * ASR hardware timer line.
+ */
+ asr_toggle();
+
+ reg = inb(asr_read_addr);
+ outb(reg & ~asr_disable_mask, asr_write_addr);
+ }
+ reg = inb(asr_read_addr);
+}
+
+static void asr_disable(void)
+{
+ unsigned char reg = inb(asr_read_addr);
+
+ if (asr_type == ASMTYPE_TOPAZ)
+ /* asr_write_addr == asr_read_addr */
+ outb(reg | TOPAZ_ASR_TOGGLE | TOPAZ_ASR_DISABLE,
+ asr_read_addr);
+ else {
+ outb(reg | asr_toggle_mask, asr_write_addr);
+ reg = inb(asr_read_addr);
+
+ outb(reg | asr_disable_mask, asr_write_addr);
+ }
+ reg = inb(asr_read_addr);
+}
+
+static int __init asr_get_base_address(void)
+{
+ unsigned char low, high;
+ const char *type = "";
+
+ asr_length = 1;
+
+ switch (asr_type) {
+ case ASMTYPE_TOPAZ:
+ /* SELECT SuperIO CHIP FOR QUERYING (WRITE 0x07 TO BOTH 0x2E and 0x2F) */
+ outb(0x07, 0x2e);
+ outb(0x07, 0x2f);
+
+ /* SELECT AND READ THE HIGH-NIBBLE OF THE GPIO BASE ADDRESS */
+ outb(0x60, 0x2e);
+ high = inb(0x2f);
+
+ /* SELECT AND READ THE LOW-NIBBLE OF THE GPIO BASE ADDRESS */
+ outb(0x61, 0x2e);
+ low = inb(0x2f);
+
+ asr_base = (high << 16) | low;
+ asr_read_addr = asr_write_addr =
+ asr_base + TOPAZ_ASR_REG_OFFSET;
+ asr_length = 5;
+
+ break;
+
+ case ASMTYPE_JASPER:
+ type = "Jaspers ";
+
+ /* FIXME: need to use pci_config_lock here, but it's not exported */
+
+/* spin_lock_irqsave(&pci_config_lock, flags);*/
+
+ /* Select the SuperIO chip in the PCI I/O port register */
+ outl(0x8000f858, 0xcf8);
+
+ /*
+ * Read the base address for the SuperIO chip.
+ * Only the lower 16 bits are valid, but the address is word
+ * aligned so the last bit must be masked off.
+ */
+ asr_base = inl(0xcfc) & 0xfffe;
+
+/* spin_unlock_irqrestore(&pci_config_lock, flags);*/
+
+ asr_read_addr = asr_write_addr =
+ asr_base + JASPER_ASR_REG_OFFSET;
+ asr_toggle_mask = JASPER_ASR_TOGGLE_MASK;
+ asr_disable_mask = JASPER_ASR_DISABLE_MASK;
+ asr_length = JASPER_ASR_REG_OFFSET + 1;
+
+ break;
+
+ case ASMTYPE_PEARL:
+ type = "Pearls ";
+ asr_base = PEARL_BASE;
+ asr_read_addr = PEARL_READ;
+ asr_write_addr = PEARL_WRITE;
+ asr_toggle_mask = PEARL_ASR_TOGGLE_MASK;
+ asr_disable_mask = PEARL_ASR_DISABLE_MASK;
+ asr_length = 4;
+ break;
+
+ case ASMTYPE_JUNIPER:
+ type = "Junipers ";
+ asr_base = JUNIPER_BASE_ADDRESS;
+ asr_read_addr = asr_write_addr = asr_base;
+ asr_toggle_mask = JUNIPER_ASR_TOGGLE_MASK;
+ asr_disable_mask = JUNIPER_ASR_DISABLE_MASK;
+ break;
+
+ case ASMTYPE_SPRUCE:
+ type = "Spruce's ";
+ asr_base = SPRUCE_BASE_ADDRESS;
+ asr_read_addr = asr_write_addr = asr_base;
+ asr_toggle_mask = SPRUCE_ASR_TOGGLE_MASK;
+ asr_disable_mask = SPRUCE_ASR_DISABLE_MASK;
+ break;
+ }
+
+ if (!request_region(asr_base, asr_length, "ibmasr")) {
+ printk(KERN_ERR PFX "address %#x already in use\n",
+ asr_base);
+ return -EBUSY;
+ }
+
+ printk(KERN_INFO PFX "found %sASR @ addr %#x\n", type, asr_base);
+
+ return 0;
+}
+
+
+static ssize_t asr_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ if (count) {
+ if (!nowayout) {
+ size_t i;
+
+ /* In case it was set long ago */
+ asr_expect_close = 0;
+
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (c == 'V')
+ asr_expect_close = 42;
+ }
+ }
+ asr_toggle();
+ }
+ return count;
+}
+
+static int asr_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ static const struct watchdog_info ident = {
+ .options = WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .identity = "IBM ASR"
+ };
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int heartbeat;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident, sizeof(ident)) ?
+ -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ asr_toggle();
+ return 0;
+
+ /*
+ * The hardware has a fixed timeout value, so no WDIOC_SETTIMEOUT
+ * and WDIOC_GETTIMEOUT always returns 256.
+ */
+ case WDIOC_GETTIMEOUT:
+ heartbeat = 256;
+ return put_user(heartbeat, p);
+
+ case WDIOC_SETOPTIONS: {
+ int new_options, retval = -EINVAL;
+
+ if (get_user(new_options, p))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ asr_disable();
+ retval = 0;
+ }
+
+ if (new_options & WDIOS_ENABLECARD) {
+ asr_enable();
+ asr_toggle();
+ retval = 0;
+ }
+
+ return retval;
+ }
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static int asr_open(struct inode *inode, struct file *file)
+{
+ if(test_and_set_bit(0, &asr_is_open))
+ return -EBUSY;
+
+ asr_toggle();
+ asr_enable();
+
+ return nonseekable_open(inode, file);
+}
+
+static int asr_release(struct inode *inode, struct file *file)
+{
+ if (asr_expect_close == 42)
+ asr_disable();
+ else {
+ printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+ asr_toggle();
+ }
+ clear_bit(0, &asr_is_open);
+ asr_expect_close = 0;
+ return 0;
+}
+
+static struct file_operations asr_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = asr_write,
+ .ioctl = asr_ioctl,
+ .open = asr_open,
+ .release = asr_release,
+};
+
+static struct miscdevice asr_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &asr_fops,
+};
+
+
+struct ibmasr_id {
+ const char *desc;
+ int type;
+};
+
+static struct ibmasr_id __initdata ibmasr_id_table[] = {
+ { "IBM Automatic Server Restart - eserver xSeries 220", ASMTYPE_TOPAZ },
+ { "IBM Automatic Server Restart - Machine Type 8673", ASMTYPE_PEARL },
+ { "IBM Automatic Server Restart - Machine Type 8480", ASMTYPE_JASPER },
+ { "IBM Automatic Server Restart - Machine Type 8482", ASMTYPE_JUNIPER },
+ { "IBM Automatic Server Restart - Machine Type 8648", ASMTYPE_SPRUCE },
+ { NULL }
+};
+
+static int __init ibmasr_init(void)
+{
+ struct ibmasr_id *id;
+ int rc;
+
+ for (id = ibmasr_id_table; id->desc; id++) {
+ if (dmi_find_device(DMI_DEV_TYPE_OTHER, id->desc, NULL)) {
+ asr_type = id->type;
+ break;
+ }
+ }
+
+ if (!asr_type)
+ return -ENODEV;
+
+ rc = misc_register(&asr_miscdev);
+ if (rc < 0) {
+ printk(KERN_ERR PFX "failed to register misc device\n");
+ return rc;
+ }
+
+ rc = asr_get_base_address();
+ if (rc) {
+ misc_deregister(&asr_miscdev);
+ return rc;
+ }
+
+ return 0;
+}
+
+static void __exit ibmasr_exit(void)
+{
+ if (!nowayout)
+ asr_disable();
+
+ misc_deregister(&asr_miscdev);
+
+ release_region(asr_base, asr_length);
+}
+
+module_init(ibmasr_init);
+module_exit(ibmasr_exit);
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+MODULE_DESCRIPTION("IBM Automatic Server Restart driver");
+MODULE_AUTHOR("Andrey Panin");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/mv64x60_wdt.c b/drivers/char/watchdog/mv64x60_wdt.c
new file mode 100644
index 00000000000..1436aea3b28
--- /dev/null
+++ b/drivers/char/watchdog/mv64x60_wdt.c
@@ -0,0 +1,252 @@
+/*
+ * mv64x60_wdt.c - MV64X60 (Marvell Discovery) watchdog userspace interface
+ *
+ * Author: James Chapman <jchapman@katalix.com>
+ *
+ * Platform-specific setup code should configure the dog to generate
+ * interrupt or reset as required. This code only enables/disables
+ * and services the watchdog.
+ *
+ * Derived from mpc8xx_wdt.c, with the following copyright.
+ *
+ * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <asm/mv64x60.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+/* MV64x60 WDC (config) register access definitions */
+#define MV64x60_WDC_CTL1_MASK (3 << 24)
+#define MV64x60_WDC_CTL1(val) ((val & 3) << 24)
+#define MV64x60_WDC_CTL2_MASK (3 << 26)
+#define MV64x60_WDC_CTL2(val) ((val & 3) << 26)
+
+/* Flags bits */
+#define MV64x60_WDOG_FLAG_OPENED 0
+#define MV64x60_WDOG_FLAG_ENABLED 1
+
+static unsigned long wdt_flags;
+static int wdt_status;
+static void __iomem *mv64x60_regs;
+static int mv64x60_wdt_timeout;
+
+static void mv64x60_wdt_reg_write(u32 val)
+{
+ /* Allow write only to CTL1 / CTL2 fields, retaining values in
+ * other fields.
+ */
+ u32 data = readl(mv64x60_regs + MV64x60_WDT_WDC);
+ data &= ~(MV64x60_WDC_CTL1_MASK | MV64x60_WDC_CTL2_MASK);
+ data |= val;
+ writel(data, mv64x60_regs + MV64x60_WDT_WDC);
+}
+
+static void mv64x60_wdt_service(void)
+{
+ /* Write 01 followed by 10 to CTL2 */
+ mv64x60_wdt_reg_write(MV64x60_WDC_CTL2(0x01));
+ mv64x60_wdt_reg_write(MV64x60_WDC_CTL2(0x02));
+}
+
+static void mv64x60_wdt_handler_disable(void)
+{
+ if (test_and_clear_bit(MV64x60_WDOG_FLAG_ENABLED, &wdt_flags)) {
+ /* Write 01 followed by 10 to CTL1 */
+ mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x01));
+ mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x02));
+ printk(KERN_NOTICE "mv64x60_wdt: watchdog deactivated\n");
+ }
+}
+
+static void mv64x60_wdt_handler_enable(void)
+{
+ if (!test_and_set_bit(MV64x60_WDOG_FLAG_ENABLED, &wdt_flags)) {
+ /* Write 01 followed by 10 to CTL1 */
+ mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x01));
+ mv64x60_wdt_reg_write(MV64x60_WDC_CTL1(0x02));
+ printk(KERN_NOTICE "mv64x60_wdt: watchdog activated\n");
+ }
+}
+
+static int mv64x60_wdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags))
+ return -EBUSY;
+
+ mv64x60_wdt_service();
+ mv64x60_wdt_handler_enable();
+
+ return 0;
+}
+
+static int mv64x60_wdt_release(struct inode *inode, struct file *file)
+{
+ mv64x60_wdt_service();
+
+#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
+ mv64x60_wdt_handler_disable();
+#endif
+
+ clear_bit(MV64x60_WDOG_FLAG_OPENED, &wdt_flags);
+
+ return 0;
+}
+
+static ssize_t mv64x60_wdt_write(struct file *file, const char *data,
+ size_t len, loff_t * ppos)
+{
+ if (*ppos != file->f_pos)
+ return -ESPIPE;
+
+ if (len)
+ mv64x60_wdt_service();
+
+ return len;
+}
+
+static int mv64x60_wdt_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int timeout;
+ static struct watchdog_info info = {
+ .options = WDIOF_KEEPALIVEPING,
+ .firmware_version = 0,
+ .identity = "MV64x60 watchdog",
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user((void *)arg, &info, sizeof(info)))
+ return -EFAULT;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ if (put_user(wdt_status, (int *)arg))
+ return -EFAULT;
+ wdt_status &= ~WDIOF_KEEPALIVEPING;
+ break;
+
+ case WDIOC_GETTEMP:
+ return -EOPNOTSUPP;
+
+ case WDIOC_SETOPTIONS:
+ return -EOPNOTSUPP;
+
+ case WDIOC_KEEPALIVE:
+ mv64x60_wdt_service();
+ wdt_status |= WDIOF_KEEPALIVEPING;
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ return -EOPNOTSUPP;
+
+ case WDIOC_GETTIMEOUT:
+ timeout = mv64x60_wdt_timeout * HZ;
+ if (put_user(timeout, (int *)arg))
+ return -EFAULT;
+ break;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+
+ return 0;
+}
+
+static struct file_operations mv64x60_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = mv64x60_wdt_write,
+ .ioctl = mv64x60_wdt_ioctl,
+ .open = mv64x60_wdt_open,
+ .release = mv64x60_wdt_release,
+};
+
+static struct miscdevice mv64x60_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &mv64x60_wdt_fops,
+};
+
+static int __devinit mv64x60_wdt_probe(struct device *dev)
+{
+ struct platform_device *pd = to_platform_device(dev);
+ struct mv64x60_wdt_pdata *pdata = pd->dev.platform_data;
+ int bus_clk = 133;
+
+ mv64x60_wdt_timeout = 10;
+ if (pdata) {
+ mv64x60_wdt_timeout = pdata->timeout;
+ bus_clk = pdata->bus_clk;
+ }
+
+ mv64x60_regs = mv64x60_get_bridge_vbase();
+
+ writel((mv64x60_wdt_timeout * (bus_clk * 1000000)) >> 8,
+ mv64x60_regs + MV64x60_WDT_WDC);
+
+ return misc_register(&mv64x60_wdt_miscdev);
+}
+
+static int __devexit mv64x60_wdt_remove(struct device *dev)
+{
+ misc_deregister(&mv64x60_wdt_miscdev);
+
+ mv64x60_wdt_service();
+ mv64x60_wdt_handler_disable();
+
+ return 0;
+}
+
+static struct device_driver mv64x60_wdt_driver = {
+ .name = MV64x60_WDT_NAME,
+ .bus = &platform_bus_type,
+ .probe = mv64x60_wdt_probe,
+ .remove = __devexit_p(mv64x60_wdt_remove),
+};
+
+static struct platform_device *mv64x60_wdt_dev;
+
+static int __init mv64x60_wdt_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "MV64x60 watchdog driver\n");
+
+ mv64x60_wdt_dev = platform_device_register_simple(MV64x60_WDT_NAME,
+ -1, NULL, 0);
+ if (IS_ERR(mv64x60_wdt_dev)) {
+ ret = PTR_ERR(mv64x60_wdt_dev);
+ goto out;
+ }
+
+ ret = driver_register(&mv64x60_wdt_driver);
+ out:
+ return ret;
+}
+
+static void __exit mv64x60_wdt_exit(void)
+{
+ driver_unregister(&mv64x60_wdt_driver);
+ platform_device_unregister(mv64x60_wdt_dev);
+}
+
+module_init(mv64x60_wdt_init);
+module_exit(mv64x60_wdt_exit);
+
+MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
+MODULE_DESCRIPTION("MV64x60 watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/char/watchdog/pcwd_pci.c b/drivers/char/watchdog/pcwd_pci.c
index 2b13afb09c5..5a80adbf803 100644
--- a/drivers/char/watchdog/pcwd_pci.c
+++ b/drivers/char/watchdog/pcwd_pci.c
@@ -29,27 +29,29 @@
* Includes, defines, variables, module parameters, ...
*/
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
+#include <linux/config.h> /* For CONFIG_WATCHDOG_NOWAYOUT/... */
+#include <linux/module.h> /* For module specific items */
+#include <linux/moduleparam.h> /* For new moduleparam's */
+#include <linux/types.h> /* For standard types (like size_t) */
+#include <linux/errno.h> /* For the -ENODEV/... values */
+#include <linux/kernel.h> /* For printk/panic/... */
+#include <linux/delay.h> /* For mdelay function */
+#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR) */
+#include <linux/watchdog.h> /* For the watchdog specific items */
+#include <linux/notifier.h> /* For notifier support */
+#include <linux/reboot.h> /* For reboot_notifier stuff */
+#include <linux/init.h> /* For __init/__exit/... */
+#include <linux/fs.h> /* For file operations */
+#include <linux/pci.h> /* For pci functions */
+#include <linux/ioport.h> /* For io-port access */
+#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
+
+#include <asm/uaccess.h> /* For copy_to_user/put_user/... */
+#include <asm/io.h> /* For inb/outb/... */
/* Module and version information */
#define WATCHDOG_VERSION "1.01"
-#define WATCHDOG_DATE "15 Mar 2005"
+#define WATCHDOG_DATE "02 Sep 2005"
#define WATCHDOG_DRIVER_NAME "PCI-PC Watchdog"
#define WATCHDOG_NAME "pcwd_pci"
#define PFX WATCHDOG_NAME ": "
@@ -335,12 +337,14 @@ static int pcipcwd_ioctl(struct inode *inode, struct file *file,
return -EFAULT;
if (new_options & WDIOS_DISABLECARD) {
- pcipcwd_stop();
+ if (pcipcwd_stop())
+ return -EIO;
retval = 0;
}
if (new_options & WDIOS_ENABLECARD) {
- pcipcwd_start();
+ if (pcipcwd_start())
+ return -EIO;
retval = 0;
}
diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c
index 8b292bf343c..3625b2601b4 100644
--- a/drivers/char/watchdog/s3c2410_wdt.c
+++ b/drivers/char/watchdog/s3c2410_wdt.c
@@ -464,7 +464,7 @@ static void s3c2410wdt_shutdown(struct device *dev)
static unsigned long wtcon_save;
static unsigned long wtdat_save;
-static int s3c2410wdt_suspend(struct device *dev, u32 state, u32 level)
+static int s3c2410wdt_suspend(struct device *dev, pm_message_t state, u32 level)
{
if (level == SUSPEND_POWER_DOWN) {
/* Save watchdog state, and turn it off. */
diff --git a/drivers/char/watchdog/sbc8360.c b/drivers/char/watchdog/sbc8360.c
new file mode 100644
index 00000000000..c6cbf808d8c
--- /dev/null
+++ b/drivers/char/watchdog/sbc8360.c
@@ -0,0 +1,414 @@
+/*
+ * SBC8360 Watchdog driver
+ *
+ * (c) Copyright 2005 Webcon, Inc.
+ *
+ * Based on ib700wdt.c, which is based on advantechwdt.c which is based
+ * on acquirewdt.c which is based on wdt.c.
+ *
+ * (c) Copyright 2001 Charles Howes <chowes@vsol.net>
+ *
+ * Based on advantechwdt.c which is based on acquirewdt.c which
+ * is based on wdt.c.
+ *
+ * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl>
+ *
+ * Based on acquirewdt.c which is based on wdt.c.
+ * Original copyright messages:
+ *
+ * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ * http://www.redhat.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Alan Cox nor CymruNet Ltd. admit liability nor provide
+ * warranty for any of this software. This material is provided
+ * "AS-IS" and at no charge.
+ *
+ * (c) Copyright 1995 Alan Cox <alan@redhat.com>
+ *
+ * 14-Dec-2001 Matt Domsch <Matt_Domsch@dell.com>
+ * Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
+ * Added timeout module option to override default
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/moduleparam.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+static unsigned long sbc8360_is_open;
+static spinlock_t sbc8360_lock;
+static char expect_close;
+
+#define PFX "sbc8360: "
+
+/*
+ *
+ * Watchdog Timer Configuration
+ *
+ * The function of the watchdog timer is to reset the system automatically
+ * and is defined at I/O port 0120H and 0121H. To enable the watchdog timer
+ * and allow the system to reset, write appropriate values from the table
+ * below to I/O port 0120H and 0121H. To disable the timer, write a zero
+ * value to I/O port 0121H for the system to stop the watchdog function.
+ *
+ * The following describes how the timer should be programmed (according to
+ * the vendor documentation)
+ *
+ * Enabling Watchdog:
+ * MOV AX,000AH (enable, phase I)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000BH (enable, phase II)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000nH (set multiplier n, from 1-4)
+ * MOV DX,0120H
+ * OUT DX,AX
+ * MOV AX,000mH (set base timer m, from 0-F)
+ * MOV DX,0121H
+ * OUT DX,AX
+ *
+ * Reset timer:
+ * MOV AX,000mH (same as set base timer, above)
+ * MOV DX,0121H
+ * OUT DX,AX
+ *
+ * Disabling Watchdog:
+ * MOV AX,0000H (a zero value)
+ * MOV DX,0120H
+ * OUT DX,AX
+ *
+ * Watchdog timeout configuration values:
+ * N
+ * M | 1 2 3 4
+ * --|----------------------------------
+ * 0 | 0.5s 5s 50s 100s
+ * 1 | 1s 10s 100s 200s
+ * 2 | 1.5s 15s 150s 300s
+ * 3 | 2s 20s 200s 400s
+ * 4 | 2.5s 25s 250s 500s
+ * 5 | 3s 30s 300s 600s
+ * 6 | 3.5s 35s 350s 700s
+ * 7 | 4s 40s 400s 800s
+ * 8 | 4.5s 45s 450s 900s
+ * 9 | 5s 50s 500s 1000s
+ * A | 5.5s 55s 550s 1100s
+ * B | 6s 60s 600s 1200s
+ * C | 6.5s 65s 650s 1300s
+ * D | 7s 70s 700s 1400s
+ * E | 7.5s 75s 750s 1500s
+ * F | 8s 80s 800s 1600s
+ *
+ * Another way to say the same things is:
+ * For N=1, Timeout = (M+1) * 0.5s
+ * For N=2, Timeout = (M+1) * 5s
+ * For N=3, Timeout = (M+1) * 50s
+ * For N=4, Timeout = (M+1) * 100s
+ *
+ */
+
+static int wd_times[64][2] = {
+ {0, 1}, /* 0 = 0.5s */
+ {1, 1}, /* 1 = 1s */
+ {2, 1}, /* 2 = 1.5s */
+ {3, 1}, /* 3 = 2s */
+ {4, 1}, /* 4 = 2.5s */
+ {5, 1}, /* 5 = 3s */
+ {6, 1}, /* 6 = 3.5s */
+ {7, 1}, /* 7 = 4s */
+ {8, 1}, /* 8 = 4.5s */
+ {9, 1}, /* 9 = 5s */
+ {0xA, 1}, /* 10 = 5.5s */
+ {0xB, 1}, /* 11 = 6s */
+ {0xC, 1}, /* 12 = 6.5s */
+ {0xD, 1}, /* 13 = 7s */
+ {0xE, 1}, /* 14 = 7.5s */
+ {0xF, 1}, /* 15 = 8s */
+ {0, 2}, /* 16 = 5s */
+ {1, 2}, /* 17 = 10s */
+ {2, 2}, /* 18 = 15s */
+ {3, 2}, /* 19 = 20s */
+ {4, 2}, /* 20 = 25s */
+ {5, 2}, /* 21 = 30s */
+ {6, 2}, /* 22 = 35s */
+ {7, 2}, /* 23 = 40s */
+ {8, 2}, /* 24 = 45s */
+ {9, 2}, /* 25 = 50s */
+ {0xA, 2}, /* 26 = 55s */
+ {0xB, 2}, /* 27 = 60s */
+ {0xC, 2}, /* 28 = 65s */
+ {0xD, 2}, /* 29 = 70s */
+ {0xE, 2}, /* 30 = 75s */
+ {0xF, 2}, /* 31 = 80s */
+ {0, 3}, /* 32 = 50s */
+ {1, 3}, /* 33 = 100s */
+ {2, 3}, /* 34 = 150s */
+ {3, 3}, /* 35 = 200s */
+ {4, 3}, /* 36 = 250s */
+ {5, 3}, /* 37 = 300s */
+ {6, 3}, /* 38 = 350s */
+ {7, 3}, /* 39 = 400s */
+ {8, 3}, /* 40 = 450s */
+ {9, 3}, /* 41 = 500s */
+ {0xA, 3}, /* 42 = 550s */
+ {0xB, 3}, /* 43 = 600s */
+ {0xC, 3}, /* 44 = 650s */
+ {0xD, 3}, /* 45 = 700s */
+ {0xE, 3}, /* 46 = 750s */
+ {0xF, 3}, /* 47 = 800s */
+ {0, 4}, /* 48 = 100s */
+ {1, 4}, /* 49 = 200s */
+ {2, 4}, /* 50 = 300s */
+ {3, 4}, /* 51 = 400s */
+ {4, 4}, /* 52 = 500s */
+ {5, 4}, /* 53 = 600s */
+ {6, 4}, /* 54 = 700s */
+ {7, 4}, /* 55 = 800s */
+ {8, 4}, /* 56 = 900s */
+ {9, 4}, /* 57 = 1000s */
+ {0xA, 4}, /* 58 = 1100s */
+ {0xB, 4}, /* 59 = 1200s */
+ {0xC, 4}, /* 60 = 1300s */
+ {0xD, 4}, /* 61 = 1400s */
+ {0xE, 4}, /* 62 = 1500s */
+ {0xF, 4} /* 63 = 1600s */
+};
+
+#define SBC8360_ENABLE 0x120
+#define SBC8360_BASETIME 0x121
+
+static int timeout = 27;
+static int wd_margin = 0xB;
+static int wd_multiplier = 2;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(timeout, int, 27);
+MODULE_PARM_DESC(timeout, "Index into timeout table (0-63) (default=27 (60s))");
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Kernel methods.
+ */
+
+/* Activate and pre-configure watchdog */
+static void sbc8360_activate(void)
+{
+ /* Enable the watchdog */
+ outb(0x0A, SBC8360_ENABLE);
+ msleep_interruptible(100);
+ outb(0x0B, SBC8360_ENABLE);
+ msleep_interruptible(100);
+ /* Set timeout multiplier */
+ outb(wd_multiplier, SBC8360_ENABLE);
+ msleep_interruptible(100);
+ /* Nothing happens until first sbc8360_ping() */
+}
+
+/* Kernel pings watchdog */
+static void sbc8360_ping(void)
+{
+ /* Write the base timer register */
+ outb(wd_margin, SBC8360_BASETIME);
+}
+
+/* Userspace pings kernel driver, or requests clean close */
+static ssize_t sbc8360_write(struct file *file, const char __user * buf,
+ size_t count, loff_t * ppos)
+{
+ if (count) {
+ if (!nowayout) {
+ size_t i;
+
+ /* In case it was set long ago */
+ expect_close = 0;
+
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_close = 42;
+ }
+ }
+ sbc8360_ping();
+ }
+ return count;
+}
+
+static int sbc8360_open(struct inode *inode, struct file *file)
+{
+ spin_lock(&sbc8360_lock);
+ if (test_and_set_bit(0, &sbc8360_is_open)) {
+ spin_unlock(&sbc8360_lock);
+ return -EBUSY;
+ }
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ /* Activate and ping once to start the countdown */
+ spin_unlock(&sbc8360_lock);
+ sbc8360_activate();
+ sbc8360_ping();
+ return nonseekable_open(inode, file);
+}
+
+static int sbc8360_close(struct inode *inode, struct file *file)
+{
+ spin_lock(&sbc8360_lock);
+ if (expect_close == 42)
+ outb(0, SBC8360_ENABLE);
+ else
+ printk(KERN_CRIT PFX
+ "SBC8360 device closed unexpectedly. SBC8360 will not stop!\n");
+
+ clear_bit(0, &sbc8360_is_open);
+ expect_close = 0;
+ spin_unlock(&sbc8360_lock);
+ return 0;
+}
+
+/*
+ * Notifier for system down
+ */
+
+static int sbc8360_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ /* Disable the SBC8360 Watchdog */
+ outb(0, SBC8360_ENABLE);
+ }
+ return NOTIFY_DONE;
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static struct file_operations sbc8360_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = sbc8360_write,
+ .open = sbc8360_open,
+ .release = sbc8360_close,
+};
+
+static struct miscdevice sbc8360_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &sbc8360_fops,
+};
+
+/*
+ * The SBC8360 needs to learn about soft shutdowns in order to
+ * turn the timebomb registers off.
+ */
+
+static struct notifier_block sbc8360_notifier = {
+ .notifier_call = sbc8360_notify_sys,
+};
+
+static int __init sbc8360_init(void)
+{
+ int res;
+ unsigned long int mseconds = 60000;
+
+ spin_lock_init(&sbc8360_lock);
+ res = misc_register(&sbc8360_miscdev);
+ if (res) {
+ printk(KERN_ERR PFX "failed to register misc device\n");
+ goto out_nomisc;
+ }
+
+ if (!request_region(SBC8360_ENABLE, 1, "SBC8360")) {
+ printk(KERN_ERR PFX "ENABLE method I/O %X is not available.\n",
+ SBC8360_ENABLE);
+ res = -EIO;
+ goto out_noenablereg;
+ }
+ if (!request_region(SBC8360_BASETIME, 1, "SBC8360")) {
+ printk(KERN_ERR PFX
+ "BASETIME method I/O %X is not available.\n",
+ SBC8360_BASETIME);
+ res = -EIO;
+ goto out_nobasetimereg;
+ }
+
+ res = register_reboot_notifier(&sbc8360_notifier);
+ if (res) {
+ printk(KERN_ERR PFX "Failed to register reboot notifier.\n");
+ goto out_noreboot;
+ }
+
+ if (timeout < 0 || timeout > 63) {
+ printk(KERN_ERR PFX "Invalid timeout index (must be 0-63).\n");
+ res = -EINVAL;
+ goto out_noreboot;
+ }
+
+ wd_margin = wd_times[timeout][0];
+ wd_multiplier = wd_times[timeout][1];
+
+ if (wd_multiplier == 1)
+ mseconds = (wd_margin + 1) * 500;
+ else if (wd_multiplier == 2)
+ mseconds = (wd_margin + 1) * 5000;
+ else if (wd_multiplier == 3)
+ mseconds = (wd_margin + 1) * 50000;
+ else if (wd_multiplier == 4)
+ mseconds = (wd_margin + 1) * 100000;
+
+ /* My kingdom for the ability to print "0.5 seconds" in the kernel! */
+ printk(KERN_INFO PFX "Timeout set at %ld ms.\n", mseconds);
+
+ return 0;
+
+ out_noreboot:
+ release_region(SBC8360_ENABLE, 1);
+ release_region(SBC8360_BASETIME, 1);
+ out_noenablereg:
+ out_nobasetimereg:
+ misc_deregister(&sbc8360_miscdev);
+ out_nomisc:
+ return res;
+}
+
+static void __exit sbc8360_exit(void)
+{
+ misc_deregister(&sbc8360_miscdev);
+ unregister_reboot_notifier(&sbc8360_notifier);
+ release_region(SBC8360_ENABLE, 1);
+ release_region(SBC8360_BASETIME, 1);
+}
+
+module_init(sbc8360_init);
+module_exit(sbc8360_exit);
+
+MODULE_AUTHOR("Ian E. Morgan <imorgan@webcon.ca>");
+MODULE_DESCRIPTION("SBC8360 watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("1.0");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+/* end of sbc8360.c */
diff --git a/drivers/char/watchdog/w83977f_wdt.c b/drivers/char/watchdog/w83977f_wdt.c
new file mode 100644
index 00000000000..a7ff64c8921
--- /dev/null
+++ b/drivers/char/watchdog/w83977f_wdt.c
@@ -0,0 +1,543 @@
+/*
+ * W83977F Watchdog Timer Driver for Winbond W83977F I/O Chip
+ *
+ * (c) Copyright 2005 Jose Goncalves <jose.goncalves@inov.pt>
+ *
+ * Based on w83877f_wdt.c by Scott Jennings,
+ * and wdt977.c by Woody Suwalski
+ *
+ * -----------------------
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/watchdog.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+#define WATCHDOG_VERSION "1.00"
+#define WATCHDOG_NAME "W83977F WDT"
+#define PFX WATCHDOG_NAME ": "
+#define DRIVER_VERSION WATCHDOG_NAME " driver, v" WATCHDOG_VERSION "\n"
+
+#define IO_INDEX_PORT 0x3F0
+#define IO_DATA_PORT (IO_INDEX_PORT+1)
+
+#define UNLOCK_DATA 0x87
+#define LOCK_DATA 0xAA
+#define DEVICE_REGISTER 0x07
+
+#define DEFAULT_TIMEOUT 45 /* default timeout in seconds */
+
+static int timeout = DEFAULT_TIMEOUT;
+static int timeoutW; /* timeout in watchdog counter units */
+static unsigned long timer_alive;
+static int testmode;
+static char expect_close;
+static spinlock_t spinlock;
+
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout,"Watchdog timeout in seconds (15..7635), default=" __MODULE_STRING(DEFAULT_TIMEOUT) ")");
+module_param(testmode, int, 0);
+MODULE_PARM_DESC(testmode,"Watchdog testmode (1 = no reboot), default=0");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)");
+
+/*
+ * Start the watchdog
+ */
+
+static int wdt_start(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&spinlock, flags);
+
+ /* Unlock the SuperIO chip */
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+ /*
+ * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
+ * F2 has the timeout in watchdog counter units.
+ * F3 is set to enable watchdog LED blink at timeout.
+ * F4 is used to just clear the TIMEOUT'ed state (bit 0).
+ */
+ outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+ outb_p(0x08,IO_DATA_PORT);
+ outb_p(0xF2,IO_INDEX_PORT);
+ outb_p(timeoutW,IO_DATA_PORT);
+ outb_p(0xF3,IO_INDEX_PORT);
+ outb_p(0x08,IO_DATA_PORT);
+ outb_p(0xF4,IO_INDEX_PORT);
+ outb_p(0x00,IO_DATA_PORT);
+
+ /* Set device Aux2 active */
+ outb_p(0x30,IO_INDEX_PORT);
+ outb_p(0x01,IO_DATA_PORT);
+
+ /*
+ * Select device Aux1 (dev=7) to set GP16 as the watchdog output
+ * (in reg E6) and GP13 as the watchdog LED output (in reg E3).
+ * Map GP16 at pin 119.
+ * In test mode watch the bit 0 on F4 to indicate "triggered" or
+ * check watchdog LED on SBC.
+ */
+ outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+ outb_p(0x07,IO_DATA_PORT);
+ if (!testmode)
+ {
+ unsigned pin_map;
+
+ outb_p(0xE6,IO_INDEX_PORT);
+ outb_p(0x0A,IO_DATA_PORT);
+ outb_p(0x2C,IO_INDEX_PORT);
+ pin_map = inb_p(IO_DATA_PORT);
+ pin_map |= 0x10;
+ pin_map &= ~(0x20);
+ outb_p(0x2C,IO_INDEX_PORT);
+ outb_p(pin_map,IO_DATA_PORT);
+ }
+ outb_p(0xE3,IO_INDEX_PORT);
+ outb_p(0x08,IO_DATA_PORT);
+
+ /* Set device Aux1 active */
+ outb_p(0x30,IO_INDEX_PORT);
+ outb_p(0x01,IO_DATA_PORT);
+
+ /* Lock the SuperIO chip */
+ outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+ spin_unlock_irqrestore(&spinlock, flags);
+
+ printk(KERN_INFO PFX "activated.\n");
+
+ return 0;
+}
+
+/*
+ * Stop the watchdog
+ */
+
+static int wdt_stop(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&spinlock, flags);
+
+ /* Unlock the SuperIO chip */
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+ /*
+ * Select device Aux2 (device=8) to set watchdog regs F2, F3 and F4.
+ * F2 is reset to its default value (watchdog timer disabled).
+ * F3 is reset to its default state.
+ * F4 clears the TIMEOUT'ed state (bit 0) - back to default.
+ */
+ outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+ outb_p(0x08,IO_DATA_PORT);
+ outb_p(0xF2,IO_INDEX_PORT);
+ outb_p(0xFF,IO_DATA_PORT);
+ outb_p(0xF3,IO_INDEX_PORT);
+ outb_p(0x00,IO_DATA_PORT);
+ outb_p(0xF4,IO_INDEX_PORT);
+ outb_p(0x00,IO_DATA_PORT);
+ outb_p(0xF2,IO_INDEX_PORT);
+ outb_p(0x00,IO_DATA_PORT);
+
+ /*
+ * Select device Aux1 (dev=7) to set GP16 (in reg E6) and
+ * Gp13 (in reg E3) as inputs.
+ */
+ outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+ outb_p(0x07,IO_DATA_PORT);
+ if (!testmode)
+ {
+ outb_p(0xE6,IO_INDEX_PORT);
+ outb_p(0x01,IO_DATA_PORT);
+ }
+ outb_p(0xE3,IO_INDEX_PORT);
+ outb_p(0x01,IO_DATA_PORT);
+
+ /* Lock the SuperIO chip */
+ outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+ spin_unlock_irqrestore(&spinlock, flags);
+
+ printk(KERN_INFO PFX "shutdown.\n");
+
+ return 0;
+}
+
+/*
+ * Send a keepalive ping to the watchdog
+ * This is done by simply re-writing the timeout to reg. 0xF2
+ */
+
+static int wdt_keepalive(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&spinlock, flags);
+
+ /* Unlock the SuperIO chip */
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+ /* Select device Aux2 (device=8) to kick watchdog reg F2 */
+ outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+ outb_p(0x08,IO_DATA_PORT);
+ outb_p(0xF2,IO_INDEX_PORT);
+ outb_p(timeoutW,IO_DATA_PORT);
+
+ /* Lock the SuperIO chip */
+ outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+ spin_unlock_irqrestore(&spinlock, flags);
+
+ return 0;
+}
+
+/*
+ * Set the watchdog timeout value
+ */
+
+static int wdt_set_timeout(int t)
+{
+ int tmrval;
+
+ /*
+ * Convert seconds to watchdog counter time units, rounding up.
+ * On PCM-5335 watchdog units are 30 seconds/step with 15 sec startup
+ * value. This information is supplied in the PCM-5335 manual and was
+ * checked by me on a real board. This is a bit strange because W83977f
+ * datasheet says counter unit is in minutes!
+ */
+ if (t < 15)
+ return -EINVAL;
+
+ tmrval = ((t + 15) + 29) / 30;
+
+ if (tmrval > 255)
+ return -EINVAL;
+
+ /*
+ * timeout is the timeout in seconds,
+ * timeoutW is the timeout in watchdog counter units.
+ */
+ timeoutW = tmrval;
+ timeout = (timeoutW * 30) - 15;
+ return 0;
+}
+
+/*
+ * Get the watchdog status
+ */
+
+static int wdt_get_status(int *status)
+{
+ int new_status;
+ unsigned long flags;
+
+ spin_lock_irqsave(&spinlock, flags);
+
+ /* Unlock the SuperIO chip */
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+ outb_p(UNLOCK_DATA,IO_INDEX_PORT);
+
+ /* Select device Aux2 (device=8) to read watchdog reg F4 */
+ outb_p(DEVICE_REGISTER,IO_INDEX_PORT);
+ outb_p(0x08,IO_DATA_PORT);
+ outb_p(0xF4,IO_INDEX_PORT);
+ new_status = inb_p(IO_DATA_PORT);
+
+ /* Lock the SuperIO chip */
+ outb_p(LOCK_DATA,IO_INDEX_PORT);
+
+ spin_unlock_irqrestore(&spinlock, flags);
+
+ *status = 0;
+ if (new_status & 1)
+ *status |= WDIOF_CARDRESET;
+
+ return 0;
+}
+
+
+/*
+ * /dev/watchdog handling
+ */
+
+static int wdt_open(struct inode *inode, struct file *file)
+{
+ /* If the watchdog is alive we don't need to start it again */
+ if( test_and_set_bit(0, &timer_alive) )
+ return -EBUSY;
+
+ if (nowayout)
+ __module_get(THIS_MODULE);
+
+ wdt_start();
+ return nonseekable_open(inode, file);
+}
+
+static int wdt_release(struct inode *inode, struct file *file)
+{
+ /*
+ * Shut off the timer.
+ * Lock it in if it's a module and we set nowayout
+ */
+ if (expect_close == 42)
+ {
+ wdt_stop();
+ clear_bit(0, &timer_alive);
+ } else {
+ wdt_keepalive();
+ printk(KERN_CRIT PFX "unexpected close, not stopping watchdog!\n");
+ }
+ expect_close = 0;
+ return 0;
+}
+
+/*
+ * wdt_write:
+ * @file: file handle to the watchdog
+ * @buf: buffer to write (unused as data does not matter here
+ * @count: count of bytes
+ * @ppos: pointer to the position to write. No seeks allowed
+ *
+ * A write to a watchdog device is defined as a keepalive signal. Any
+ * write of data will do, as we we don't define content meaning.
+ */
+
+static ssize_t wdt_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if(count)
+ {
+ if (!nowayout)
+ {
+ size_t ofs;
+
+ /* note: just in case someone wrote the magic character long ago */
+ expect_close = 0;
+
+ /* scan to see whether or not we got the magic character */
+ for(ofs = 0; ofs != count; ofs++)
+ {
+ char c;
+ if (get_user(c, buf + ofs))
+ return -EFAULT;
+ if (c == 'V') {
+ expect_close = 42;
+ }
+ }
+ }
+
+ /* someone wrote to us, we should restart timer */
+ wdt_keepalive();
+ }
+ return count;
+}
+
+/*
+ * wdt_ioctl:
+ * @inode: inode of the device
+ * @file: file handle to the device
+ * @cmd: watchdog command
+ * @arg: argument pointer
+ *
+ * The watchdog API defines a common set of functions for all watchdogs
+ * according to their available features.
+ */
+
+static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING,
+ .firmware_version = 1,
+ .identity = WATCHDOG_NAME,
+};
+
+static int wdt_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int status;
+ int new_options, retval = -EINVAL;
+ int new_timeout;
+ union {
+ struct watchdog_info __user *ident;
+ int __user *i;
+ } uarg;
+
+ uarg.i = (int __user *)arg;
+
+ switch(cmd)
+ {
+ default:
+ return -ENOIOCTLCMD;
+
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(uarg.ident, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+ case WDIOC_GETSTATUS:
+ wdt_get_status(&status);
+ return put_user(status, uarg.i);
+
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, uarg.i);
+
+ case WDIOC_KEEPALIVE:
+ wdt_keepalive();
+ return 0;
+
+ case WDIOC_SETOPTIONS:
+ if (get_user (new_options, uarg.i))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ wdt_stop();
+ retval = 0;
+ }
+
+ if (new_options & WDIOS_ENABLECARD) {
+ wdt_start();
+ retval = 0;
+ }
+
+ return retval;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, uarg.i))
+ return -EFAULT;
+
+ if (wdt_set_timeout(new_timeout))
+ return -EINVAL;
+
+ wdt_keepalive();
+ /* Fall */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, uarg.i);
+
+ }
+}
+
+static int wdt_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ if (code==SYS_DOWN || code==SYS_HALT)
+ wdt_stop();
+ return NOTIFY_DONE;
+}
+
+static struct file_operations wdt_fops=
+{
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = wdt_write,
+ .ioctl = wdt_ioctl,
+ .open = wdt_open,
+ .release = wdt_release,
+};
+
+static struct miscdevice wdt_miscdev=
+{
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &wdt_fops,
+};
+
+static struct notifier_block wdt_notifier = {
+ .notifier_call = wdt_notify_sys,
+};
+
+static int __init w83977f_wdt_init(void)
+{
+ int rc;
+
+ printk(KERN_INFO PFX DRIVER_VERSION);
+
+ spin_lock_init(&spinlock);
+
+ /*
+ * Check that the timeout value is within it's range ;
+ * if not reset to the default
+ */
+ if (wdt_set_timeout(timeout)) {
+ wdt_set_timeout(DEFAULT_TIMEOUT);
+ printk(KERN_INFO PFX "timeout value must be 15<=timeout<=7635, using %d\n",
+ DEFAULT_TIMEOUT);
+ }
+
+ if (!request_region(IO_INDEX_PORT, 2, WATCHDOG_NAME))
+ {
+ printk(KERN_ERR PFX "I/O address 0x%04x already in use\n",
+ IO_INDEX_PORT);
+ rc = -EIO;
+ goto err_out;
+ }
+
+ rc = misc_register(&wdt_miscdev);
+ if (rc)
+ {
+ printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ wdt_miscdev.minor, rc);
+ goto err_out_region;
+ }
+
+ rc = register_reboot_notifier(&wdt_notifier);
+ if (rc)
+ {
+ printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n",
+ rc);
+ goto err_out_miscdev;
+ }
+
+ printk(KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d testmode=%d)\n",
+ timeout, nowayout, testmode);
+
+ return 0;
+
+err_out_miscdev:
+ misc_deregister(&wdt_miscdev);
+err_out_region:
+ release_region(IO_INDEX_PORT,2);
+err_out:
+ return rc;
+}
+
+static void __exit w83977f_wdt_exit(void)
+{
+ wdt_stop();
+ misc_deregister(&wdt_miscdev);
+ unregister_reboot_notifier(&wdt_notifier);
+ release_region(IO_INDEX_PORT,2);
+}
+
+module_init(w83977f_wdt_init);
+module_exit(w83977f_wdt_exit);
+
+MODULE_AUTHOR("Jose Goncalves <jose.goncalves@inov.pt>");
+MODULE_DESCRIPTION("Driver for watchdog timer in W83977F I/O chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/include/asm-ppc/mv64x60.h b/include/asm-ppc/mv64x60.h
index 835930d6faa..75c2ffa26b2 100644
--- a/include/asm-ppc/mv64x60.h
+++ b/include/asm-ppc/mv64x60.h
@@ -119,6 +119,14 @@ extern spinlock_t mv64x60_lock;
#define MV64x60_64BIT_WIN_COUNT 24
+/* Watchdog Platform Device, Driver Data */
+#define MV64x60_WDT_NAME "wdt"
+
+struct mv64x60_wdt_pdata {
+ int timeout; /* watchdog expiry in seconds, default 10 */
+ int bus_clk; /* bus clock in MHz, default 133 */
+};
+
/*
* Define a structure that's used to pass in config information to the
* core routines.
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 03:23:50 +0000