summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/hwmon/sch562722
-rw-r--r--MAINTAINERS7
-rw-r--r--drivers/hwmon/Kconfig9
-rw-r--r--drivers/hwmon/Makefile1
-rw-r--r--drivers/hwmon/sch5627.c858
5 files changed, 897 insertions, 0 deletions
diff --git a/Documentation/hwmon/sch5627 b/Documentation/hwmon/sch5627
new file mode 100644
index 00000000000..446a054e491
--- /dev/null
+++ b/Documentation/hwmon/sch5627
@@ -0,0 +1,22 @@
+Kernel driver sch5627
+=====================
+
+Supported chips:
+ * SMSC SCH5627
+ Prefix: 'sch5627'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: Application Note available upon request
+
+Author: Hans de Goede <hdegoede@redhat.com>
+
+
+Description
+-----------
+
+SMSC SCH5627 Super I/O chips include complete hardware monitoring
+capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures.
+
+The hardware monitoring part of the SMSC SCH5627 is accessed by talking
+through an embedded microcontroller. An application note describing the
+protocol for communicating with the microcontroller is available upon
+request. Please mail me if you want a copy.
diff --git a/MAINTAINERS b/MAINTAINERS
index 666287a6f3d..b8a123f7e81 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5769,6 +5769,13 @@ S: Supported
F: Documentation/hwmon/emc2103
F: drivers/hwmon/emc2103.c
+SMSC SCH5627 HARDWARE MONITOR DRIVER
+M: Hans de Goede <hdegoede@redhat.com>
+L: lm-sensors@lm-sensors.org
+S: Supported
+F: Documentation/hwmon/sch5627
+F: drivers/hwmon/sch5627.c
+
SMSC47B397 HARDWARE MONITOR DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
L: lm-sensors@lm-sensors.org
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 19d72bcf966..6fad9f082f6 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -959,6 +959,15 @@ config SENSORS_SMSC47B397
This driver can also be built as a module. If so, the module
will be called smsc47b397.
+config SENSORS_SCH5627
+ tristate "SMSC SCH5627"
+ help
+ If you say yes here you get support for the hardware monitoring
+ features of the SMSC SCH5627 Super-I/O chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called sch5627.
+
config SENSORS_ADS7828
tristate "Texas Instruments ADS7828"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index c068f82082c..4d0122c5221 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_SENSORS_S3C) += s3c-hwmon.o
+obj-$(CONFIG_SENSORS_SCH5627) += sch5627.o
obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SHT21) += sht21.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
diff --git a/drivers/hwmon/sch5627.c b/drivers/hwmon/sch5627.c
new file mode 100644
index 00000000000..9a51dcca9b0
--- /dev/null
+++ b/drivers/hwmon/sch5627.c
@@ -0,0 +1,858 @@
+/***************************************************************************
+ * Copyright (C) 2010-2011 Hans de Goede <hdegoede@redhat.com> *
+ * *
+ * This program is free software; you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation; either version 2 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program; if not, write to the *
+ * Free Software Foundation, Inc., *
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ ***************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+
+#define DRVNAME "sch5627"
+#define DEVNAME DRVNAME /* We only support one model */
+
+#define SIO_SCH5627_EM_LD 0x0C /* Embedded Microcontroller LD */
+#define SIO_UNLOCK_KEY 0x55 /* Key to enable Super-I/O */
+#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
+
+#define SIO_REG_LDSEL 0x07 /* Logical device select */
+#define SIO_REG_DEVID 0x20 /* Device ID */
+#define SIO_REG_ENABLE 0x30 /* Logical device enable */
+#define SIO_REG_ADDR 0x66 /* Logical device address (2 bytes) */
+
+#define SIO_SCH5627_ID 0xC6 /* Chipset ID */
+
+#define REGION_LENGTH 9
+
+#define SCH5627_HWMON_ID 0xa5
+#define SCH5627_COMPANY_ID 0x5c
+#define SCH5627_PRIMARY_ID 0xa0
+
+#define SCH5627_REG_BUILD_CODE 0x39
+#define SCH5627_REG_BUILD_ID 0x3a
+#define SCH5627_REG_HWMON_ID 0x3c
+#define SCH5627_REG_HWMON_REV 0x3d
+#define SCH5627_REG_COMPANY_ID 0x3e
+#define SCH5627_REG_PRIMARY_ID 0x3f
+#define SCH5627_REG_CTRL 0x40
+
+#define SCH5627_NO_TEMPS 8
+#define SCH5627_NO_FANS 4
+#define SCH5627_NO_IN 5
+
+static const u16 SCH5627_REG_TEMP_MSB[SCH5627_NO_TEMPS] = {
+ 0x2B, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x180, 0x181 };
+static const u16 SCH5627_REG_TEMP_LSN[SCH5627_NO_TEMPS] = {
+ 0xE2, 0xE1, 0xE1, 0xE5, 0xE5, 0xE6, 0x182, 0x182 };
+static const u16 SCH5627_REG_TEMP_HIGH_NIBBLE[SCH5627_NO_TEMPS] = {
+ 0, 0, 1, 1, 0, 0, 0, 1 };
+static const u16 SCH5627_REG_TEMP_HIGH[SCH5627_NO_TEMPS] = {
+ 0x61, 0x57, 0x59, 0x5B, 0x5D, 0x5F, 0x184, 0x186 };
+static const u16 SCH5627_REG_TEMP_ABS[SCH5627_NO_TEMPS] = {
+ 0x9B, 0x96, 0x97, 0x98, 0x99, 0x9A, 0x1A8, 0x1A9 };
+
+static const u16 SCH5627_REG_FAN[SCH5627_NO_FANS] = {
+ 0x2C, 0x2E, 0x30, 0x32 };
+static const u16 SCH5627_REG_FAN_MIN[SCH5627_NO_FANS] = {
+ 0x62, 0x64, 0x66, 0x68 };
+
+static const u16 SCH5627_REG_IN_MSB[SCH5627_NO_IN] = {
+ 0x22, 0x23, 0x24, 0x25, 0x189 };
+static const u16 SCH5627_REG_IN_LSN[SCH5627_NO_IN] = {
+ 0xE4, 0xE4, 0xE3, 0xE3, 0x18A };
+static const u16 SCH5627_REG_IN_HIGH_NIBBLE[SCH5627_NO_IN] = {
+ 1, 0, 1, 0, 1 };
+static const u16 SCH5627_REG_IN_FACTOR[SCH5627_NO_IN] = {
+ 10745, 3660, 9765, 10745, 3660 };
+static const char * const SCH5627_IN_LABELS[SCH5627_NO_IN] = {
+ "VCC", "VTT", "VBAT", "VTR", "V_IN" };
+
+struct sch5627_data {
+ unsigned short addr;
+ struct device *hwmon_dev;
+ u8 temp_max[SCH5627_NO_TEMPS];
+ u8 temp_crit[SCH5627_NO_TEMPS];
+ u16 fan_min[SCH5627_NO_FANS];
+
+ struct mutex update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+ u16 temp[SCH5627_NO_TEMPS];
+ u16 fan[SCH5627_NO_FANS];
+ u16 in[SCH5627_NO_IN];
+};
+
+static struct platform_device *sch5627_pdev;
+
+/* Super I/O functions */
+static inline int superio_inb(int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static inline int superio_enter(int base)
+{
+ /* Don't step on other drivers' I/O space by accident */
+ if (!request_muxed_region(base, 2, DRVNAME)) {
+ pr_err("I/O address 0x%04x already in use\n", base);
+ return -EBUSY;
+ }
+
+ outb(SIO_UNLOCK_KEY, base);
+
+ return 0;
+}
+
+static inline void superio_select(int base, int ld)
+{
+ outb(SIO_REG_LDSEL, base);
+ outb(ld, base + 1);
+}
+
+static inline void superio_exit(int base)
+{
+ outb(SIO_LOCK_KEY, base);
+ release_region(base, 2);
+}
+
+static int sch5627_read_virtual_reg(struct sch5627_data *data, u16 reg)
+{
+ u8 val;
+ int i;
+ /*
+ * According to SMSC for the commands we use the maximum time for
+ * the EM to respond is 15 ms, but testing shows in practice it
+ * responds within 15-32 reads, so we first busy poll, and if
+ * that fails sleep a bit and try again until we are way past
+ * the 15 ms maximum response time.
+ */
+ const int max_busy_polls = 64;
+ const int max_lazy_polls = 32;
+
+ /* (Optional) Write-Clear the EC to Host Mailbox Register */
+ val = inb(data->addr + 1);
+ outb(val, data->addr + 1);
+
+ /* Set Mailbox Address Pointer to first location in Region 1 */
+ outb(0x00, data->addr + 2);
+ outb(0x80, data->addr + 3);
+
+ /* Write Request Packet Header */
+ outb(0x02, data->addr + 4); /* Access Type: VREG read */
+ outb(0x01, data->addr + 5); /* # of Entries: 1 Byte (8-bit) */
+ outb(0x04, data->addr + 2); /* Mailbox AP to first data entry loc. */
+
+ /* Write Address field */
+ outb(reg & 0xff, data->addr + 6);
+ outb(reg >> 8, data->addr + 7);
+
+ /* Execute the Random Access Command */
+ outb(0x01, data->addr); /* Write 01h to the Host-to-EC register */
+
+ /* EM Interface Polling "Algorithm" */
+ for (i = 0; i < max_busy_polls + max_lazy_polls; i++) {
+ if (i >= max_busy_polls)
+ msleep(1);
+ /* Read Interrupt source Register */
+ val = inb(data->addr + 8);
+ /* Write Clear the interrupt source bits */
+ if (val)
+ outb(val, data->addr + 8);
+ /* Command Completed ? */
+ if (val & 0x01)
+ break;
+ }
+ if (i == max_busy_polls + max_lazy_polls) {
+ pr_err("Max retries exceeded reading virtual "
+ "register 0x%04hx (%d)\n", reg, 1);
+ return -EIO;
+ }
+
+ /*
+ * According to SMSC we may need to retry this, but sofar I've always
+ * seen this succeed in 1 try.
+ */
+ for (i = 0; i < max_busy_polls; i++) {
+ /* Read EC-to-Host Register */
+ val = inb(data->addr + 1);
+ /* Command Completed ? */
+ if (val == 0x01)
+ break;
+
+ if (i == 0)
+ pr_warn("EC reports: 0x%02x reading virtual register "
+ "0x%04hx\n", (unsigned int)val, reg);
+ }
+ if (i == max_busy_polls) {
+ pr_err("Max retries exceeded reading virtual "
+ "register 0x%04hx (%d)\n", reg, 2);
+ return -EIO;
+ }
+
+ /*
+ * According to the SMSC app note we should now do:
+ *
+ * Set Mailbox Address Pointer to first location in Region 1 *
+ * outb(0x00, data->addr + 2);
+ * outb(0x80, data->addr + 3);
+ *
+ * But if we do that things don't work, so let's not.
+ */
+
+ /* Read Data from Mailbox */
+ return inb(data->addr + 4);
+}
+
+static int sch5627_read_virtual_reg16(struct sch5627_data *data, u16 reg)
+{
+ int lsb, msb;
+
+ /* Read LSB first, this will cause the matching MSB to be latched */
+ lsb = sch5627_read_virtual_reg(data, reg);
+ if (lsb < 0)
+ return lsb;
+
+ msb = sch5627_read_virtual_reg(data, reg + 1);
+ if (msb < 0)
+ return msb;
+
+ return lsb | (msb << 8);
+}
+
+static int sch5627_read_virtual_reg12(struct sch5627_data *data, u16 msb_reg,
+ u16 lsn_reg, int high_nibble)
+{
+ int msb, lsn;
+
+ /* Read MSB first, this will cause the matching LSN to be latched */
+ msb = sch5627_read_virtual_reg(data, msb_reg);
+ if (msb < 0)
+ return msb;
+
+ lsn = sch5627_read_virtual_reg(data, lsn_reg);
+ if (lsn < 0)
+ return lsn;
+
+ if (high_nibble)
+ return (msb << 4) | (lsn >> 4);
+ else
+ return (msb << 4) | (lsn & 0x0f);
+}
+
+static struct sch5627_data *sch5627_update_device(struct device *dev)
+{
+ struct sch5627_data *data = dev_get_drvdata(dev);
+ struct sch5627_data *ret = data;
+ int i, val;
+
+ mutex_lock(&data->update_lock);
+
+ /* Cache the values for 1 second */
+ if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
+ for (i = 0; i < SCH5627_NO_TEMPS; i++) {
+ val = sch5627_read_virtual_reg12(data,
+ SCH5627_REG_TEMP_MSB[i],
+ SCH5627_REG_TEMP_LSN[i],
+ SCH5627_REG_TEMP_HIGH_NIBBLE[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->temp[i] = val;
+ }
+
+ for (i = 0; i < SCH5627_NO_FANS; i++) {
+ val = sch5627_read_virtual_reg16(data,
+ SCH5627_REG_FAN[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->fan[i] = val;
+ }
+
+ for (i = 0; i < SCH5627_NO_IN; i++) {
+ val = sch5627_read_virtual_reg12(data,
+ SCH5627_REG_IN_MSB[i],
+ SCH5627_REG_IN_LSN[i],
+ SCH5627_REG_IN_HIGH_NIBBLE[i]);
+ if (unlikely(val < 0)) {
+ ret = ERR_PTR(val);
+ goto abort;
+ }
+ data->in[i] = val;
+ }
+
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+abort:
+ mutex_unlock(&data->update_lock);
+ return ret;
+}
+
+static int __devinit sch5627_read_limits(struct sch5627_data *data)
+{
+ int i, val;
+
+ for (i = 0; i < SCH5627_NO_TEMPS; i++) {
+ /*
+ * Note what SMSC calls ABS, is what lm_sensors calls max
+ * (aka high), and HIGH is what lm_sensors calls crit.
+ */
+ val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_ABS[i]);
+ if (val < 0)
+ return val;
+ data->temp_max[i] = val;
+
+ val = sch5627_read_virtual_reg(data, SCH5627_REG_TEMP_HIGH[i]);
+ if (val < 0)
+ return val;
+ data->temp_crit[i] = val;
+ }
+ for (i = 0; i < SCH5627_NO_FANS; i++) {
+ val = sch5627_read_virtual_reg16(data, SCH5627_REG_FAN_MIN[i]);
+ if (val < 0)
+ return val;
+ data->fan_min[i] = val;
+ }
+
+ return 0;
+}
+
+static int reg_to_temp(u16 reg)
+{
+ return (reg * 625) / 10 - 64000;
+}
+
+static int reg_to_temp_limit(u8 reg)
+{
+ return (reg - 64) * 1000;
+}
+
+static int reg_to_rpm(u16 reg)
+{
+ if (reg == 0)
+ return -EIO;
+ if (reg == 0xffff)
+ return 0;
+
+ return 5400540 / reg;
+}
+
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", DEVNAME);
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = sch5627_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = reg_to_temp(data->temp[attr->index]);
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = sch5627_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", data->temp[attr->index] == 0);
+}
+
+static ssize_t show_temp_max(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = dev_get_drvdata(dev);
+ int val;
+
+ val = reg_to_temp_limit(data->temp_max[attr->index]);
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_temp_crit(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = dev_get_drvdata(dev);
+ int val;
+
+ val = reg_to_temp_limit(data->temp_crit[attr->index]);
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = sch5627_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = reg_to_rpm(data->fan[attr->index]);
+ if (val < 0)
+ return val;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = sch5627_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ data->fan[attr->index] == 0xffff);
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = dev_get_drvdata(dev);
+ int val = reg_to_rpm(data->fan_min[attr->index]);
+ if (val < 0)
+ return val;
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct sch5627_data *data = sch5627_update_device(dev);
+ int val;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ val = DIV_ROUND_CLOSEST(
+ data->in[attr->index] * SCH5627_REG_IN_FACTOR[attr->index],
+ 10000);
+ return snprintf(buf, PAGE_SIZE, "%d\n", val);
+}
+
+static ssize_t show_in_label(struct device *dev, struct device_attribute
+ *devattr, char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ SCH5627_IN_LABELS[attr->index]);
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_temp, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_temp, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_temp, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_temp, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_temp_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_temp_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_temp_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_fault, S_IRUGO, show_temp_fault, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_fault, S_IRUGO, show_temp_fault, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_fault, S_IRUGO, show_temp_fault, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_fault, S_IRUGO, show_temp_fault, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_max, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_max, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_max, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_max, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_max, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_max, S_IRUGO, show_temp_max, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_max, S_IRUGO, show_temp_max, NULL, 7);
+static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 2);
+static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 3);
+static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 4);
+static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 5);
+static SENSOR_DEVICE_ATTR(temp7_crit, S_IRUGO, show_temp_crit, NULL, 6);
+static SENSOR_DEVICE_ATTR(temp8_crit, S_IRUGO, show_temp_crit, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO, show_fan_min, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO, show_fan_min, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO, show_fan_min, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IRUGO, show_fan_min, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
+static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
+static SENSOR_DEVICE_ATTR(in0_label, S_IRUGO, show_in_label, NULL, 0);
+static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_in_label, NULL, 1);
+static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_in_label, NULL, 2);
+static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_in_label, NULL, 3);
+
+static struct attribute *sch5627_attributes[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp6_input.dev_attr.attr,
+ &sensor_dev_attr_temp7_input.dev_attr.attr,
+ &sensor_dev_attr_temp8_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ &sensor_dev_attr_temp5_fault.dev_attr.attr,
+ &sensor_dev_attr_temp6_fault.dev_attr.attr,
+ &sensor_dev_attr_temp7_fault.dev_attr.attr,
+ &sensor_dev_attr_temp8_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp6_max.dev_attr.attr,
+ &sensor_dev_attr_temp7_max.dev_attr.attr,
+ &sensor_dev_attr_temp8_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit.dev_attr.attr,
+ &sensor_dev_attr_temp6_crit.dev_attr.attr,
+ &sensor_dev_attr_temp7_crit.dev_attr.attr,
+ &sensor_dev_attr_temp8_crit.dev_attr.attr,
+
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan4_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_fault.dev_attr.attr,
+ &sensor_dev_attr_fan2_fault.dev_attr.attr,
+ &sensor_dev_attr_fan3_fault.dev_attr.attr,
+ &sensor_dev_attr_fan4_fault.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan4_min.dev_attr.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_in2_label.dev_attr.attr,
+ &sensor_dev_attr_in3_label.dev_attr.attr,
+ /* No in4_label as in4 is a generic input pin */
+
+ NULL
+};
+
+static const struct attribute_group sch5627_group = {
+ .attrs = sch5627_attributes,
+};
+
+static int sch5627_remove(struct platform_device *pdev)
+{
+ struct sch5627_data *data = platform_get_drvdata(pdev);
+
+ if (data->hwmon_dev)
+ hwmon_device_unregister(data->hwmon_dev);
+
+ sysfs_remove_group(&pdev->dev.kobj, &sch5627_group);
+ platform_set_drvdata(pdev, NULL);
+ kfree(data);
+
+ return 0;
+}
+
+static int __devinit sch5627_probe(struct platform_device *pdev)
+{
+ struct sch5627_data *data;
+ int err, build_code, build_id, hwmon_rev, val;
+
+ data = kzalloc(sizeof(struct sch5627_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
+ mutex_init(&data->update_lock);
+ platform_set_drvdata(pdev, data);
+
+ val = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_ID);
+ if (val < 0) {
+ err = val;
+ goto error;
+ }
+ if (val != SCH5627_HWMON_ID) {
+ pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "hwmon",
+ val, SCH5627_HWMON_ID);
+ err = -ENODEV;
+ goto error;
+ }
+
+ val = sch5627_read_virtual_reg(data, SCH5627_REG_COMPANY_ID);
+ if (val < 0) {
+ err = val;
+ goto error;
+ }
+ if (val != SCH5627_COMPANY_ID) {
+ pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "company",
+ val, SCH5627_COMPANY_ID);
+ err = -ENODEV;
+ goto error;
+ }
+
+ val = sch5627_read_virtual_reg(data, SCH5627_REG_PRIMARY_ID);
+ if (val < 0) {
+ err = val;
+ goto error;
+ }
+ if (val != SCH5627_PRIMARY_ID) {
+ pr_err("invalid %s id: 0x%02X (expected 0x%02X)\n", "primary",
+ val, SCH5627_PRIMARY_ID);
+ err = -ENODEV;
+ goto error;
+ }
+
+ build_code = sch5627_read_virtual_reg(data, SCH5627_REG_BUILD_CODE);
+ if (build_code < 0) {
+ err = build_code;
+ goto error;
+ }
+
+ build_id = sch5627_read_virtual_reg16(data, SCH5627_REG_BUILD_ID);
+ if (build_id < 0) {
+ err = build_id;
+ goto error;
+ }
+
+ hwmon_rev = sch5627_read_virtual_reg(data, SCH5627_REG_HWMON_REV);
+ if (hwmon_rev < 0) {
+ err = hwmon_rev;
+ goto error;
+ }
+
+ val = sch5627_read_virtual_reg(data, SCH5627_REG_CTRL);
+ if (val < 0) {
+ err = val;
+ goto error;
+ }
+ if (!(val & 0x01)) {
+ pr_err("hardware monitoring not enabled\n");
+ err = -ENODEV;
+ goto error;
+ }
+
+ /*
+ * Read limits, we do this only once as reading a register on
+ * the sch5627 is quite expensive (and they don't change).
+ */
+ err = sch5627_read_limits(data);
+ if (err)
+ goto error;
+
+ pr_info("firmware build: code 0x%02X, id 0x%04X, hwmon: rev 0x%02X\n",
+ build_code, build_id, hwmon_rev);
+
+ /* Register sysfs interface files */
+ err = sysfs_create_group(&pdev->dev.kobj, &sch5627_group);
+ if (err)
+ goto error;
+
+ data->hwmon_dev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ err = PTR_ERR(data->hwmon_dev);
+ data->hwmon_dev = NULL;
+ goto error;
+ }
+
+ return 0;
+
+error:
+ sch5627_remove(pdev);
+ return err;
+}
+
+static int __init sch5627_find(int sioaddr, unsigned short *address)
+{
+ u8 devid;
+ int err = superio_enter(sioaddr);
+ if (err)
+ return err;
+
+ devid = superio_inb(sioaddr, SIO_REG_DEVID);
+ if (devid != SIO_SCH5627_ID) {
+ pr_debug("Unsupported device id: 0x%02x\n",
+ (unsigned int)devid);
+ err = -ENODEV;
+ goto exit;
+ }
+
+ superio_select(sioaddr, SIO_SCH5627_EM_LD);
+
+ if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
+ pr_warn("Device not activated\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /*
+ * Warning the order of the low / high byte is the other way around
+ * as on most other superio devices!!
+ */
+ *address = superio_inb(sioaddr, SIO_REG_ADDR) |
+ superio_inb(sioaddr, SIO_REG_ADDR + 1) << 8;
+ if (*address == 0) {
+ pr_warn("Base address not set\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ pr_info("Found %s chip at %#hx\n", DEVNAME, *address);
+exit:
+ superio_exit(sioaddr);
+ return err;
+}
+
+static int __init sch5627_device_add(unsigned short address)
+{
+ struct resource res = {
+ .start = address,
+ .end = address + REGION_LENGTH - 1,
+ .flags = IORESOURCE_IO,
+ };
+ int err;
+
+ sch5627_pdev = platform_device_alloc(DRVNAME, address);
+ if (!sch5627_pdev)
+ return -ENOMEM;
+
+ res.name = sch5627_pdev->name;
+ err = acpi_check_resource_conflict(&res);
+ if (err)
+ goto exit_device_put;
+
+ err = platform_device_add_resources(sch5627_pdev, &res, 1);
+ if (err) {
+ pr_err("Device resource addition failed\n");
+ goto exit_device_put;
+ }
+
+ err = platform_device_add(sch5627_pdev);
+ if (err) {
+ pr_err("Device addition failed\n");
+ goto exit_device_put;
+ }
+
+ return 0;
+
+exit_device_put:
+ platform_device_put(sch5627_pdev);
+
+ return err;
+}
+
+static struct platform_driver sch5627_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+ .probe = sch5627_probe,
+ .remove = sch5627_remove,
+};
+
+static int __init sch5627_init(void)
+{
+ int err = -ENODEV;
+ unsigned short address;
+
+ if (sch5627_find(0x4e, &address) && sch5627_find(0x2e, &address))
+ goto exit;
+
+ err = platform_driver_register(&sch5627_driver);
+ if (err)
+ goto exit;
+
+ err = sch5627_device_add(address);
+ if (err)
+ goto exit_driver;
+
+ return 0;
+
+exit_driver:
+ platform_driver_unregister(&sch5627_driver);
+exit:
+ return err;
+}
+
+static void __exit sch5627_exit(void)
+{
+ platform_device_unregister(sch5627_pdev);
+ platform_driver_unregister(&sch5627_driver);
+}
+
+MODULE_DESCRIPTION("SMSC SCH5627 Hardware Monitoring Driver");
+MODULE_AUTHOR("Hans de Goede (hdegoede@redhat.com)");
+MODULE_LICENSE("GPL");
+
+module_init(sch5627_init);
+module_exit(sch5627_exit);