summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/mach-pxa/cm-x2xx.c13
-rw-r--r--arch/arm/mach-pxa/cpufreq-pxa2xx.c10
-rw-r--r--arch/arm/mach-pxa/csb726.c7
-rw-r--r--arch/arm/mach-pxa/generic.c1
-rw-r--r--arch/arm/mach-pxa/h5000.c9
-rw-r--r--arch/arm/mach-pxa/include/mach/pxa2xx-regs.h55
-rw-r--r--arch/arm/mach-pxa/include/mach/smemc.h74
-rw-r--r--arch/arm/mach-pxa/lpd270.c3
-rw-r--r--arch/arm/mach-pxa/lubbock.c3
-rw-r--r--arch/arm/mach-pxa/mainstone.c3
-rw-r--r--arch/arm/mach-pxa/pxa25x.c5
-rw-r--r--arch/arm/mach-pxa/pxa27x.c11
-rw-r--r--arch/arm/mach-pxa/pxa3xx.c5
-rw-r--r--arch/arm/mach-pxa/sleep.S2
-rw-r--r--arch/arm/mach-pxa/smemc.c51
-rw-r--r--arch/arm/mach-pxa/spitz.c6
-rw-r--r--arch/arm/mach-pxa/stargate2.c3
-rw-r--r--arch/arm/mach-pxa/tosa.c7
-rw-r--r--arch/arm/mach-pxa/trizeps4.c3
-rw-r--r--arch/arm/mach-pxa/xcep.c5
-rw-r--r--arch/arm/mach-pxa/zeus.c8
-rw-r--r--drivers/pcmcia/pxa2xx_base.c28
22 files changed, 176 insertions, 136 deletions
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 47e242005fa..b734d846816 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,6 +24,7 @@
#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
+#include <mach/smemc.h>
#include <asm/hardware/it8152.h>
@@ -392,9 +393,9 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
cmx2xx_pci_suspend();
/* save MSC registers */
- sleep_save_msc[0] = MSC0;
- sleep_save_msc[1] = MSC1;
- sleep_save_msc[2] = MSC2;
+ sleep_save_msc[0] = __raw_readl(MSC0);
+ sleep_save_msc[1] = __raw_readl(MSC1);
+ sleep_save_msc[2] = __raw_readl(MSC2);
/* setup power saving mode registers */
PCFR = 0x0;
@@ -416,9 +417,9 @@ static int cmx2xx_resume(struct sys_device *dev)
cmx2xx_pci_resume();
/* restore MSC registers */
- MSC0 = sleep_save_msc[0];
- MSC1 = sleep_save_msc[1];
- MSC2 = sleep_save_msc[2];
+ __raw_writel(sleep_save_msc[0], MSC0);
+ __raw_writel(sleep_save_msc[1], MSC1);
+ __raw_writel(sleep_save_msc[2], MSC2);
return 0;
}
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 58093d9e07b..6a7aeab42f6 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -38,8 +38,10 @@
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
+#include <linux/io.h>
#include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
#ifdef DEBUG
static unsigned int freq_debug;
@@ -242,7 +244,7 @@ static void pxa27x_guess_max_freq(void)
static void init_sdram_rows(void)
{
- uint32_t mdcnfg = MDCNFG;
+ uint32_t mdcnfg = __raw_readl(MDCNFG);
unsigned int drac2 = 0, drac0 = 0;
if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@ static int pxa_set_target(struct cpufreq_policy *policy,
* we need to preset the smaller DRI before the change. If we're
* speeding up we need to set the larger DRI value after the change.
*/
- preset_mdrefr = postset_mdrefr = MDREFR;
- if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+ preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+ if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
preset_mdrefr |= mdrefr_dri(new_freq_mem);
}
@@ -370,7 +372,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
3: nop \n\
"
: "=&r" (unused)
- : "r" (&MDREFR), "r" (cclkcfg),
+ : "r" (MDREFR), "r" (cclkcfg),
"r" (preset_mdrefr), "r" (postset_mdrefr)
: "r4", "r5");
local_irq_restore(flags);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 225a2a11781..a305424a967 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -27,6 +27,7 @@
#include <mach/ohci.h>
#include <mach/pxa2xx-regs.h>
#include <mach/audio.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -255,9 +256,9 @@ static struct platform_device *devices[] __initdata = {
static void __init csb726_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/* MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/* MSC2 = 0x06697ff4; *//* none/SM501 */
- MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/* __raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/* __raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+ __raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 6a5f3793537..d4ce8f9233d 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,6 +28,7 @@
#include <mach/reset.h>
#include <mach/gpio.h>
+#include <mach/smemc.h>
#include "generic.h"
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0ef16351bf9..657db469de1 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -32,6 +32,7 @@
#include <mach/pxa25x.h>
#include <mach/h5000.h>
#include <mach/udc.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -172,11 +173,11 @@ static unsigned long h5000_pin_config[] __initdata = {
static void fix_msc(void)
{
- MSC0 = 0x129c24f2;
- MSC1 = 0x7ff424fa;
- MSC2 = 0x7ff47ff4;
+ __raw_writel(0x129c24f2, MSC0);
+ __raw_writel(0x7ff424fa, MSC1);
+ __raw_writel(0x7ff47ff4, MSC2);
- MDREFR |= 0x02080000;
+ __raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
}
/*
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index dd0fc1c95cc..ee6ced1cea7 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -17,61 +17,6 @@
#include <mach/hardware.h>
/*
- * Memory controller
- */
-
-#define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */
-#define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */
-#define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */
-#define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */
-#define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */
-#define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */
-#define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */
-#define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s) __REG2(0x48000028, (s)<<2 ) /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s) __REG2(0x48000030, (s)<<2 ) /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s) __REG2(0x48000038, (s)<<2 ) /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
-#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
-#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
-
-/*
* Power Manager
*/
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
new file mode 100644
index 00000000000..654adc90c9a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -0,0 +1,74 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE 0x48000000
+#define PXA3XX_SMEMC_BASE 0x4a000000
+#define SMEMC_VIRT 0xf6000000
+
+#define MDCNFG (SMEMC_VIRT + 0x00) /* SDRAM Configuration Register 0 */
+#define MDREFR (SMEMC_VIRT + 0x04) /* SDRAM Refresh Control Register */
+#define MSC0 (SMEMC_VIRT + 0x08) /* Static Memory Control Register 0 */
+#define MSC1 (SMEMC_VIRT + 0x0C) /* Static Memory Control Register 1 */
+#define MSC2 (SMEMC_VIRT + 0x10) /* Static Memory Control Register 2 */
+#define MECR (SMEMC_VIRT + 0x14) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR (SMEMC_VIRT + 0x18) /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG (SMEMC_VIRT + 0x1C) /* Synchronous Static Memory Control Register */
+#define SXMRS (SMEMC_VIRT + 0x24) /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0 (SMEMC_VIRT + 0x28) /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1 (SMEMC_VIRT + 0x2C) /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0 (SMEMC_VIRT + 0x30) /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1 (SMEMC_VIRT + 0x34) /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0 (SMEMC_VIRT + 0x38) /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1 (SMEMC_VIRT + 0x3C) /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS (SMEMC_VIRT + 0x40) /* MRS value to be written to SDRAM */
+#define BOOT_DEF (SMEMC_VIRT + 0x44) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG (SMEMC_VIRT + 0x68) /* Clock Configuration */
+#define CSADRCFG0 (SMEMC_VIRT + 0x80) /* Address Configuration Register for CS0 */
+#define CSADRCFG1 (SMEMC_VIRT + 0x84) /* Address Configuration Register for CS1 */
+#define CSADRCFG2 (SMEMC_VIRT + 0x88) /* Address Configuration Register for CS2 */
+#define CSADRCFG3 (SMEMC_VIRT + 0x8C) /* Address Configuration Register for CS3 */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s) (SMEMC_VIRT + 0x28 + ((s)<<2)) /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s) (SMEMC_VIRT + 0x30 + ((s)<<2)) /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s) (SMEMC_VIRT + 0x38 + ((s)<<2)) /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS (1 << 0) /* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT (1 << 1) /* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0 (1 << 0) /* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1 (1 << 1) /* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2 (1 << 16) /* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3 (1 << 17) /* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */
+#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */
+#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
+
+#endif
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index db615d578c0..8ab62a67780 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -463,7 +464,7 @@ static void __init lpd270_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
lpd270_flash_data[1].width = 4;
/*
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 5b1cc1c01c6..d3375486c8c 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -50,6 +50,7 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/pm.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "clock.h"
@@ -525,7 +526,7 @@ static void __init lubbock_init(void)
pxa_set_ac97_info(NULL);
lubbock_flash_data[0].width = lubbock_flash_data[1].width =
- (BOOT_DEF & 1) ? 2 : 4;
+ (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
/* Compensate for the nROMBT switch which swaps the flash banks */
printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
flashboot?"Flash":"ROM", flashboot);
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 8bef7c8bcbb..740c03590e3 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -51,6 +51,7 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/pxa27x_keypad.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -565,7 +566,7 @@ static void __init mainstone_init(void)
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
- mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+ mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
/* Compensate for SW7 which swaps the flash banks */
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 67200ce25e1..23136b6afa8 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -31,6 +31,7 @@
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
+#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
@@ -323,8 +324,8 @@ void __init pxa26x_init_irq(void)
static struct map_desc pxa25x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = 0xf6000000,
- .pfn = __phys_to_pfn(0x48000000),
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
},
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 71dbee42edf..839548d9418 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -17,6 +17,7 @@
#include <linux/suspend.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
+#include <linux/io.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -28,6 +29,8 @@
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
+#include <mach/smemc.h>
+
#include <plat/i2c.h>
#include "generic.h"
@@ -255,7 +258,7 @@ enum {
void pxa27x_cpu_pm_save(unsigned long *sleep_save)
{
- SAVE(MDREFR);
+ sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
SAVE(PCFR);
SAVE(CKEN);
@@ -264,7 +267,7 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
{
- RESTORE(MDREFR);
+ __raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
RESTORE(PCFR);
PSSR = PSSR_RDH | PSSR_PH;
@@ -373,8 +376,8 @@ void __init pxa27x_init_irq(void)
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = 0xf6000000,
- .pfn = __phys_to_pfn(0x48000000),
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA2XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
}, { /* IMem ctl */
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 5480a94e646..dc658ad234e 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -31,6 +31,7 @@
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/regs-intc.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
@@ -583,8 +584,8 @@ void __init pxa3xx_init_irq(void)
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
- .virtual = 0xf6000000,
- .pfn = __phys_to_pfn(0x4a000000),
+ .virtual = SMEMC_VIRT,
+ .pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 52c30b01a67..2f5b08aeb52 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -14,7 +14,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
-
+#include <mach/smemc.h>
#include <mach/pxa2xx-regs.h>
#define MDREFR_KDIV 0x200a4000 // all banks
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index d6f6904132a..232b7316ec0 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -9,50 +9,37 @@
#include <linux/sysdev.h>
#include <mach/hardware.h>
-
-#define SMEMC_PHYS_BASE (0x4A000000)
-#define SMEMC_PHYS_SIZE (0x90)
-
-#define MSC0 (0x08) /* Static Memory Controller Register 0 */
-#define MSC1 (0x0C) /* Static Memory Controller Register 1 */
-#define SXCNFG (0x1C) /* Synchronous Static Memory Control Register */
-#define MEMCLKCFG (0x68) /* Clock Configuration */
-#define CSADRCFG0 (0x80) /* Address Configuration Register for CS0 */
-#define CSADRCFG1 (0x84) /* Address Configuration Register for CS1 */
-#define CSADRCFG2 (0x88) /* Address Configuration Register for CS2 */
-#define CSADRCFG3 (0x8C) /* Address Configuration Register for CS3 */
+#include <mach/smemc.h>
#ifdef CONFIG_PM
-static void __iomem *smemc_mmio_base;
-
static unsigned long msc[2];
static unsigned long sxcnfg, memclkcfg;
static unsigned long csadrcfg[4];
static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
{
- msc[0] = __raw_readl(smemc_mmio_base + MSC0);
- msc[1] = __raw_readl(smemc_mmio_base + MSC1);
- sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
- memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
- csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
- csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
- csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
- csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+ msc[0] = __raw_readl(MSC0);
+ msc[1] = __raw_readl(MSC1);
+ sxcnfg = __raw_readl(SXCNFG);
+ memclkcfg = __raw_readl(MEMCLKCFG);
+ csadrcfg[0] = __raw_readl(CSADRCFG0);
+ csadrcfg[1] = __raw_readl(CSADRCFG1);
+ csadrcfg[2] = __raw_readl(CSADRCFG2);
+ csadrcfg[3] = __raw_readl(CSADRCFG3);
return 0;
}
static int pxa3xx_smemc_resume(struct sys_device *dev)
{
- __raw_writel(msc[0], smemc_mmio_base + MSC0);
- __raw_writel(msc[1], smemc_mmio_base + MSC1);
- __raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
- __raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
- __raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
- __raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
- __raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
- __raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+ __raw_writel(msc[0], MSC0);
+ __raw_writel(msc[1], MSC1);
+ __raw_writel(sxcnfg, SXCNFG);
+ __raw_writel(memclkcfg, MEMCLKCFG);
+ __raw_writel(csadrcfg[0], CSADRCFG0);
+ __raw_writel(csadrcfg[1], CSADRCFG1);
+ __raw_writel(csadrcfg[2], CSADRCFG2);
+ __raw_writel(csadrcfg[3], CSADRCFG3);
return 0;
}
@@ -73,10 +60,6 @@ static int __init smemc_init(void)
int ret = 0;
if (cpu_is_pxa3xx()) {
- smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
- if (smemc_mmio_base == NULL)
- return -ENODEV;
-
ret = sysdev_class_register(&smemc_sysclass);
if (ret)
return ret;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 38bcc2a0c51..0499a69e767 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -45,6 +45,7 @@
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
@@ -930,9 +931,10 @@ static void spitz_poweroff(void)
static void spitz_restart(char mode, const char *cmd)
{
+ uint32_t msc0 = __raw_readl(MSC0);
/* Bootloader magic for a reboot */
- if ((MSC0 & 0xffff0000) == 0x7ff00000)
- MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ if ((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
spitz_poweroff();
}
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 19f5378e766..3498a142394 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -48,6 +48,7 @@
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x-udc.h>
+#include <mach/smemc.h>
#include <linux/spi/spi.h>
#include <linux/mfd/da903x.h>
@@ -976,7 +977,7 @@ static void __init stargate2_init(void)
{
/* This is probably a board specific hack as this must be set
prior to connecting the MFP stuff up. */
- MECR &= ~MECR_NOS;
+ __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 38833858cf8..57d61ee9b22 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -46,6 +46,7 @@
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
#include <mach/audio.h>
+#include <mach/smemc.h>
#include <asm/mach/arch.h>
#include <mach/tosa.h>
@@ -893,9 +894,11 @@ static void tosa_poweroff(void)
static void tosa_restart(char mode, const char *cmd)
{
+ uint32_t msc0 = __raw_readl(MSC0);
+
/* Bootloader magic for a reboot */
- if((MSC0 & 0xffff0000) == 0x7ff00000)
- MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+ if((msc0 & 0xffff0000) == 0x7ff00000)
+ __raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
tosa_poweroff();
}
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index ab3b933e346..43fc9ca1459 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -47,6 +47,7 @@
#include <mach/mmc.h>
#include <mach/irda.h>
#include <mach/ohci.h>
+#include <mach/smemc.h>
#include <plat/i2c.h>
#include "generic.h"
@@ -542,7 +543,7 @@ static void __init trizeps4_map_io(void)
pxa27x_map_io();
iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
- if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+ if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
/* if flash is 16 bit wide its a Trizeps4 WL */
__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
trizeps4_flash_data[0].width = 2;
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 99744f4d05a..51c0281c6e0 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -172,9 +173,9 @@ static void __init xcep_init(void)
/* See Intel XScale Developer's Guide for details */
/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
- MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+ __raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
- MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+ __raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
platform_add_devices(ARRAY_AND_SIZE(devices));
pxa_set_i2c_info(&xcep_i2c_platform_data);
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 0909df2151e..c87f2b35ee0 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -47,6 +47,7 @@
#include <mach/audio.h>
#include <mach/arcom-pcmcia.h>
#include <mach/zeus.h>
+#include <mach/smemc.h>
#include "generic.h"
@@ -823,13 +824,16 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
static void __init zeus_init(void)
{
u16 dm9000_msc = DM9K_MSC_VALUE;
+ u32 msc0, msc1;
system_rev = __raw_readw(ZEUS_CPLD_VERSION);
pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
/* Fix timings for dm9000s (CS1/CS2)*/
- MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
- MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+ msc0 = __raw_readl(MSC0) & 0x0000ffff | (dm9000_msc << 16);
+ msc1 = __raw_readl(MSC1) & 0xffff0000 | dm9000_msc;
+ __raw_writel(msc0, MSC0);
+ __raw_writel(msc1, MSC1);
pm_power_off = zeus_power_off;
zeus_setup_apm();
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ae07b4db8a6..55a7d0b045b 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -26,6 +26,7 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
+#include <mach/smemc.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
@@ -116,37 +117,49 @@ static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
{
- MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCMEM(sock));
+
return 0;
}
static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
{
- MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCIO(sock));
+
return 0;
}
static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
{
- MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+ uint32_t val;
+
+ val = ((pxa2xx_mcxx_setup(speed, clock)
& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
| ((pxa2xx_mcxx_asst(speed, clock)
& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
| ((pxa2xx_mcxx_hold(speed, clock)
& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
+ __raw_writel(val, MCATT(sock));
+
return 0;
}
@@ -205,19 +218,18 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
static void pxa2xx_configure_sockets(struct device *dev)
{
struct pcmcia_low_level *ops = dev->platform_data;
-
/*
* We have at least one socket, so set MECR:CIT
* (Card Is There)
*/
- MECR |= MECR_CIT;
+ uint32_t mecr = MECR_CIT;
/* Set MECR:NOS (Number Of Sockets) */
if ((ops->first + ops->nr) > 1 ||
machine_is_viper() || machine_is_arcom_zeus())
- MECR |= MECR_NOS;
- else
- MECR &= ~MECR_NOS;
+ mecr |= MECR_NOS;
+
+ __raw_writel(mecr, MECR);
}
static const char *skt_names[] = {