diff options
| -rw-r--r-- | drivers/char/ipmi/ipmi_devintf.c | 25 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_msghandler.c | 117 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 9 | ||||
| -rw-r--r-- | include/linux/ipmi.h | 45 | ||||
| -rw-r--r-- | include/linux/ipmi_msgdefs.h | 5 | ||||
| -rw-r--r-- | include/linux/ipmi_smi.h | 7 |
6 files changed, 207 insertions, 1 deletions
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c index 81fcf0ce21d..375d3378eec 100644 --- a/drivers/char/ipmi/ipmi_devintf.c +++ b/drivers/char/ipmi/ipmi_devintf.c @@ -596,6 +596,31 @@ static int ipmi_ioctl(struct inode *inode, rv = 0; break; } + + case IPMICTL_GET_MAINTENANCE_MODE_CMD: + { + int mode; + + mode = ipmi_get_maintenance_mode(priv->user); + if (copy_to_user(arg, &mode, sizeof(mode))) { + rv = -EFAULT; + break; + } + rv = 0; + break; + } + + case IPMICTL_SET_MAINTENANCE_MODE_CMD: + { + int mode; + + if (copy_from_user(&mode, arg, sizeof(mode))) { + rv = -EFAULT; + break; + } + rv = ipmi_set_maintenance_mode(priv->user, mode); + break; + } } return rv; diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 03f32611831..ff0e68f0386 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -48,7 +48,7 @@ #define PFX "IPMI message handler: " -#define IPMI_DRIVER_VERSION "39.0" +#define IPMI_DRIVER_VERSION "39.1" static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); static int ipmi_init_msghandler(void); @@ -59,6 +59,9 @@ static int initialized = 0; static struct proc_dir_entry *proc_ipmi_root = NULL; #endif /* CONFIG_PROC_FS */ +/* Remain in auto-maintenance mode for this amount of time (in ms). */ +#define IPMI_MAINTENANCE_MODE_TIMEOUT 30000 + #define MAX_EVENTS_IN_QUEUE 25 /* Don't let a message sit in a queue forever, always time it with at lest @@ -262,6 +265,12 @@ struct ipmi_smi unsigned char local_sel_device; unsigned char local_event_generator; + /* For handling of maintenance mode. */ + int maintenance_mode; + int maintenance_mode_enable; + int auto_maintenance_timeout; + spinlock_t maintenance_mode_lock; /* Used in a timer... */ + /* A cheap hack, if this is non-null and a message to an interface comes in with a NULL user, call this routine with it. Note that the message will still be freed by the @@ -985,6 +994,65 @@ int ipmi_get_my_LUN(ipmi_user_t user, return 0; } +int ipmi_get_maintenance_mode(ipmi_user_t user) +{ + int mode; + unsigned long flags; + + spin_lock_irqsave(&user->intf->maintenance_mode_lock, flags); + mode = user->intf->maintenance_mode; + spin_unlock_irqrestore(&user->intf->maintenance_mode_lock, flags); + + return mode; +} +EXPORT_SYMBOL(ipmi_get_maintenance_mode); + +static void maintenance_mode_update(ipmi_smi_t intf) +{ + if (intf->handlers->set_maintenance_mode) + intf->handlers->set_maintenance_mode( + intf->send_info, intf->maintenance_mode_enable); +} + +int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) +{ + int rv = 0; + unsigned long flags; + ipmi_smi_t intf = user->intf; + + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); + if (intf->maintenance_mode != mode) { + switch (mode) { + case IPMI_MAINTENANCE_MODE_AUTO: + intf->maintenance_mode = mode; + intf->maintenance_mode_enable + = (intf->auto_maintenance_timeout > 0); + break; + + case IPMI_MAINTENANCE_MODE_OFF: + intf->maintenance_mode = mode; + intf->maintenance_mode_enable = 0; + break; + + case IPMI_MAINTENANCE_MODE_ON: + intf->maintenance_mode = mode; + intf->maintenance_mode_enable = 1; + break; + + default: + rv = -EINVAL; + goto out_unlock; + } + + maintenance_mode_update(intf); + } + out_unlock: + spin_unlock_irqrestore(&intf->maintenance_mode_lock, flags); + + return rv; +} +EXPORT_SYMBOL(ipmi_set_maintenance_mode); + int ipmi_set_gets_events(ipmi_user_t user, int val) { unsigned long flags; @@ -1322,6 +1390,24 @@ static int i_ipmi_request(ipmi_user_t user, goto out_err; } + if (((msg->netfn == IPMI_NETFN_APP_REQUEST) + && ((msg->cmd == IPMI_COLD_RESET_CMD) + || (msg->cmd == IPMI_WARM_RESET_CMD))) + || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) + { + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); + intf->auto_maintenance_timeout + = IPMI_MAINTENANCE_MODE_TIMEOUT; + if (!intf->maintenance_mode + && !intf->maintenance_mode_enable) + { + intf->maintenance_mode_enable = 1; + maintenance_mode_update(intf); + } + spin_unlock_irqrestore(&intf->maintenance_mode_lock, + flags); + } + if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { spin_lock_irqsave(&intf->counter_lock, flags); intf->sent_invalid_commands++; @@ -2605,6 +2691,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, INIT_LIST_HEAD(&intf->waiting_events); intf->waiting_events_count = 0; mutex_init(&intf->cmd_rcvrs_mutex); + spin_lock_init(&intf->maintenance_mode_lock); INIT_LIST_HEAD(&intf->cmd_rcvrs); init_waitqueue_head(&intf->waitq); @@ -3593,6 +3680,30 @@ static void ipmi_timeout_handler(long timeout_period) list_for_each_entry_safe(msg, msg2, &timeouts, link) deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); + + /* + * Maintenance mode handling. Check the timeout + * optimistically before we claim the lock. It may + * mean a timeout gets missed occasionally, but that + * only means the timeout gets extended by one period + * in that case. No big deal, and it avoids the lock + * most of the time. + */ + if (intf->auto_maintenance_timeout > 0) { + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); + if (intf->auto_maintenance_timeout > 0) { + intf->auto_maintenance_timeout + -= timeout_period; + if (!intf->maintenance_mode + && (intf->auto_maintenance_timeout <= 0)) + { + intf->maintenance_mode_enable = 0; + maintenance_mode_update(intf); + } + } + spin_unlock_irqrestore(&intf->maintenance_mode_lock, + flags); + } } rcu_read_unlock(); } @@ -3606,6 +3717,10 @@ static void ipmi_request_event(void) /* Called from the timer, no need to check if handlers is * valid. */ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + /* No event requests when in maintenance mode. */ + if (intf->maintenance_mode_enable) + continue; + handlers = intf->handlers; if (handlers) handlers->request_events(intf->send_info); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 89cdb928061..f04bee76ba2 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -949,12 +949,21 @@ static int smi_start_processing(void *send_info, return 0; } +static void set_maintenance_mode(void *send_info, int enable) +{ + struct smi_info *smi_info = send_info; + + if (!enable) + atomic_set(&smi_info->req_events, 0); +} + static struct ipmi_smi_handlers handlers = { .owner = THIS_MODULE, .start_processing = smi_start_processing, .sender = sender, .request_events = request_events, + .set_maintenance_mode = set_maintenance_mode, .set_run_to_completion = set_run_to_completion, .poll = poll, }; diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 796ca009fd4..7a9db390c56 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -208,6 +208,15 @@ struct kernel_ipmi_msg code as the first byte of the incoming data, unlike a response. */ +/* + * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO + * setting is the default and means it will be set on certain + * commands. Hard setting it on and off will override automatic + * operation. + */ +#define IPMI_MAINTENANCE_MODE_AUTO 0 +#define IPMI_MAINTENANCE_MODE_OFF 1 +#define IPMI_MAINTENANCE_MODE_ON 2 #ifdef __KERNEL__ @@ -374,6 +383,35 @@ int ipmi_unregister_for_cmd(ipmi_user_t user, unsigned int chans); /* + * Go into a mode where the driver will not autonomously attempt to do + * things with the interface. It will still respond to attentions and + * interrupts, and it will expect that commands will complete. It + * will not automatcially check for flags, events, or things of that + * nature. + * + * This is primarily used for firmware upgrades. The idea is that + * when you go into firmware upgrade mode, you do this operation + * and the driver will not attempt to do anything but what you tell + * it or what the BMC asks for. + * + * Note that if you send a command that resets the BMC, the driver + * will still expect a response from that command. So the BMC should + * reset itself *after* the response is sent. Resetting before the + * response is just silly. + * + * If in auto maintenance mode, the driver will automatically go into + * maintenance mode for 30 seconds if it sees a cold reset, a warm + * reset, or a firmware NetFN. This means that code that uses only + * firmware NetFN commands to do upgrades will work automatically + * without change, assuming it sends a message every 30 seconds or + * less. + * + * See the IPMI_MAINTENANCE_MODE_xxx defines for what the mode means. + */ +int ipmi_get_maintenance_mode(ipmi_user_t user); +int ipmi_set_maintenance_mode(ipmi_user_t user, int mode); + +/* * Allow run-to-completion mode to be set for the interface of * a specific user. */ @@ -656,4 +694,11 @@ struct ipmi_timing_parms #define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \ struct ipmi_timing_parms) +/* + * Set the maintenance mode. See ipmi_set_maintenance_mode() above + * for a description of what this does. + */ +#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int) +#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int) + #endif /* __LINUX_IPMI_H */ diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index 4d04d8b58a0..8d6759cc1a7 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -46,6 +46,8 @@ #define IPMI_NETFN_APP_REQUEST 0x06 #define IPMI_NETFN_APP_RESPONSE 0x07 #define IPMI_GET_DEVICE_ID_CMD 0x01 +#define IPMI_COLD_RESET_CMD 0x02 +#define IPMI_WARM_RESET_CMD 0x03 #define IPMI_CLEAR_MSG_FLAGS_CMD 0x30 #define IPMI_GET_DEVICE_GUID_CMD 0x08 #define IPMI_GET_MSG_FLAGS_CMD 0x31 @@ -60,6 +62,9 @@ #define IPMI_NETFN_STORAGE_RESPONSE 0x0b #define IPMI_ADD_SEL_ENTRY_CMD 0x44 +#define IPMI_NETFN_FIRMWARE_REQUEST 0x08 +#define IPMI_NETFN_FIRMWARE_RESPONSE 0x09 + /* The default slave address */ #define IPMI_BMC_SLAVE_ADDR 0x20 diff --git a/include/linux/ipmi_smi.h b/include/linux/ipmi_smi.h index 2cc960da417..c0633108d05 100644 --- a/include/linux/ipmi_smi.h +++ b/include/linux/ipmi_smi.h @@ -115,6 +115,13 @@ struct ipmi_smi_handlers poll for operations during things like crash dumps. */ void (*poll)(void *send_info); + /* Enable/disable firmware maintenance mode. Note that this + is *not* the modes defined, this is simply an on/off + setting. The message handler does the mode handling. Note + that this is called from interupt context, so it cannot + block. */ + void (*set_maintenance_mode)(void *send_info, int enable); + /* Tell the handler that we are using it/not using it. The message handler get the modules that this handler belongs to; this function lets the SMI claim any modules that it |