summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/staging/agnx/agnx.h2
-rw-r--r--drivers/staging/android/binder.c16
-rw-r--r--drivers/staging/android/lowmemorykiller.txt16
-rw-r--r--drivers/staging/android/timed_gpio.c5
-rw-r--r--drivers/staging/comedi/Kconfig1
-rw-r--r--drivers/staging/meilhaus/Kconfig21
-rw-r--r--drivers/staging/poch/poch.c2
-rw-r--r--drivers/staging/usbip/usbip_common.c16
8 files changed, 56 insertions, 23 deletions
diff --git a/drivers/staging/agnx/agnx.h b/drivers/staging/agnx/agnx.h
index a75b0db3726..20f36da6247 100644
--- a/drivers/staging/agnx/agnx.h
+++ b/drivers/staging/agnx/agnx.h
@@ -1,6 +1,8 @@
#ifndef AGNX_H_
#define AGNX_H_
+#include <linux/io.h>
+
#include "xmit.h"
#define PFX KBUILD_MODNAME ": "
diff --git a/drivers/staging/android/binder.c b/drivers/staging/android/binder.c
index 6a4ceacb33f..758131cad08 100644
--- a/drivers/staging/android/binder.c
+++ b/drivers/staging/android/binder.c
@@ -319,6 +319,7 @@ int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
int fd, error;
struct fdtable *fdt;
unsigned long rlim_cur;
+ unsigned long irqs;
if (files == NULL)
return -ESRCH;
@@ -335,12 +336,11 @@ repeat:
* N.B. For clone tasks sharing a files structure, this test
* will limit the total number of files that can be opened.
*/
- rcu_read_lock();
- if (tsk->signal)
+ rlim_cur = 0;
+ if (lock_task_sighand(tsk, &irqs)) {
rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
- else
- rlim_cur = 0;
- rcu_read_unlock();
+ unlock_task_sighand(tsk, &irqs);
+ }
if (fd >= rlim_cur)
goto out;
@@ -2649,14 +2649,14 @@ static void binder_vma_open(struct vm_area_struct *vma)
{
struct binder_proc *proc = vma->vm_private_data;
if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
- printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+ printk(KERN_INFO "binder: %d open vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
dump_stack();
}
static void binder_vma_close(struct vm_area_struct *vma)
{
struct binder_proc *proc = vma->vm_private_data;
if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
- printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+ printk(KERN_INFO "binder: %d close vm area %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
proc->vma = NULL;
}
@@ -2677,7 +2677,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma)
vma->vm_end = vma->vm_start + SZ_4M;
if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
- printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, vma->vm_page_prot.pgprot);
+ printk(KERN_INFO "binder_mmap: %d %lx-%lx (%ld K) vma %lx pagep %lx\n", proc->pid, vma->vm_start, vma->vm_end, (vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags, pgprot_val(vma->vm_page_prot));
if (vma->vm_flags & FORBIDDEN_MMAP_FLAGS) {
ret = -EPERM;
diff --git a/drivers/staging/android/lowmemorykiller.txt b/drivers/staging/android/lowmemorykiller.txt
new file mode 100644
index 00000000000..bd5c0c02896
--- /dev/null
+++ b/drivers/staging/android/lowmemorykiller.txt
@@ -0,0 +1,16 @@
+The lowmemorykiller driver lets user-space specify a set of memory thresholds
+where processes with a range of oom_adj values will get killed. Specify the
+minimum oom_adj values in /sys/module/lowmemorykiller/parameters/adj and the
+number of free pages in /sys/module/lowmemorykiller/parameters/minfree. Both
+files take a comma separated list of numbers in ascending order.
+
+For example, write "0,8" to /sys/module/lowmemorykiller/parameters/adj and
+"1024,4096" to /sys/module/lowmemorykiller/parameters/minfree to kill processes
+with a oom_adj value of 8 or higher when the free memory drops below 4096 pages
+and kill processes with a oom_adj value of 0 or higher when the free memory
+drops below 1024 pages.
+
+The driver considers memory used for caches to be free, but if a large
+percentage of the cached memory is locked this can be very inaccurate
+and processes may not get killed until the normal oom killer is triggered.
+
diff --git a/drivers/staging/android/timed_gpio.c b/drivers/staging/android/timed_gpio.c
index bea68c9fc94..903270cbbe0 100644
--- a/drivers/staging/android/timed_gpio.c
+++ b/drivers/staging/android/timed_gpio.c
@@ -18,7 +18,7 @@
#include <linux/platform_device.h>
#include <linux/hrtimer.h>
#include <linux/err.h>
-#include <asm/arch/gpio.h>
+#include <linux/gpio.h>
#include "timed_gpio.h"
@@ -49,7 +49,8 @@ static ssize_t gpio_enable_show(struct device *dev, struct device_attribute *att
if (hrtimer_active(&gpio_data->timer)) {
ktime_t r = hrtimer_get_remaining(&gpio_data->timer);
- remaining = r.tv.sec * 1000 + r.tv.nsec / 1000000;
+ struct timeval t = ktime_to_timeval(r);
+ remaining = t.tv_sec * 1000 + t.tv_usec;
} else
remaining = 0;
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig
index b501bfb9c75..b47ca1e7e38 100644
--- a/drivers/staging/comedi/Kconfig
+++ b/drivers/staging/comedi/Kconfig
@@ -1,6 +1,7 @@
config COMEDI
tristate "Data Acquision support (comedi)"
default N
+ depends on m
---help---
Enable support a wide range of data acquision devices
for Linux.
diff --git a/drivers/staging/meilhaus/Kconfig b/drivers/staging/meilhaus/Kconfig
index 6def83fa2c9..923af22a468 100644
--- a/drivers/staging/meilhaus/Kconfig
+++ b/drivers/staging/meilhaus/Kconfig
@@ -4,6 +4,7 @@
menuconfig MEILHAUS
tristate "Meilhaus support"
+ depends on m
---help---
If you have a Meilhaus card, say Y (or M) here.
@@ -18,7 +19,7 @@ if MEILHAUS
config ME0600
tristate "Meilhaus ME-600 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-600 family of boards
that do data collection and multipurpose I/O.
@@ -29,7 +30,7 @@ config ME0600
config ME0900
tristate "Meilhaus ME-900 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-900 family of boards
that do data collection and multipurpose I/O.
@@ -40,7 +41,7 @@ config ME0900
config ME1000
tristate "Meilhaus ME-1000 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-1000 family of boards
that do data collection and multipurpose I/O.
@@ -51,7 +52,7 @@ config ME1000
config ME1400
tristate "Meilhaus ME-1400 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-1400 family of boards
that do data collection and multipurpose I/O.
@@ -62,7 +63,7 @@ config ME1400
config ME1600
tristate "Meilhaus ME-1600 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-1600 family of boards
that do data collection and multipurpose I/O.
@@ -73,7 +74,7 @@ config ME1600
config ME4600
tristate "Meilhaus ME-4600 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-4600 family of boards
that do data collection and multipurpose I/O.
@@ -84,7 +85,7 @@ config ME4600
config ME6000
tristate "Meilhaus ME-6000 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-6000 family of boards
that do data collection and multipurpose I/O.
@@ -95,7 +96,7 @@ config ME6000
config ME8100
tristate "Meilhaus ME-8100 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-8100 family of boards
that do data collection and multipurpose I/O.
@@ -106,7 +107,7 @@ config ME8100
config ME8200
tristate "Meilhaus ME-8200 support"
default n
- depends on PCI
+ depends on PCI && m
help
This driver supports the Meilhaus ME-8200 family of boards
that do data collection and multipurpose I/O.
@@ -117,7 +118,7 @@ config ME8200
config MEDUMMY
tristate "Meilhaus dummy driver"
default n
- depends on PCI
+ depends on PCI && m
help
This provides a dummy driver for the Meilhaus driver package
diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c
index ec343ef53a8..0d111ddfabb 100644
--- a/drivers/staging/poch/poch.c
+++ b/drivers/staging/poch/poch.c
@@ -1026,7 +1026,7 @@ static int poch_ioctl(struct inode *inode, struct file *filp,
}
break;
case POCH_IOC_GET_COUNTERS:
- if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
+ if (!access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters)))
return -EFAULT;
spin_lock_irq(&channel->counters_lock);
diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c
index 72e209276ea..22f93dd0ba0 100644
--- a/drivers/staging/usbip/usbip_common.c
+++ b/drivers/staging/usbip/usbip_common.c
@@ -406,8 +406,20 @@ void usbip_start_threads(struct usbip_device *ud)
/*
* threads are invoked per one device (per one connection).
*/
- kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
- kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+ int retval;
+
+ retval = kernel_thread(usbip_thread, (void *)&ud->tcp_rx, 0);
+ if (retval < 0) {
+ printk(KERN_ERR "Creating tcp_rx thread for ud %p failed.\n",
+ ud);
+ return;
+ }
+ retval = kernel_thread(usbip_thread, (void *)&ud->tcp_tx, 0);
+ if (retval < 0) {
+ printk(KERN_ERR "Creating tcp_tx thread for ud %p failed.\n",
+ ud);
+ return;
+ }
/* confirm threads are starting */
wait_for_completion(&ud->tcp_rx.thread_done);