diff options
25 files changed, 538 insertions, 90 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 703a44fa0f9..552ea6d71ea 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -118,6 +118,7 @@ endif machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_OMAP1) := omap1 machine-$(CONFIG_ARCH_OMAP2) := omap2 + machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7069c9d536f..e2481e4045e 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -15,8 +15,17 @@ config ARCH_OMAP2430 bool "OMAP2430 support" depends on ARCH_OMAP24XX +config ARCH_OMAP34XX + bool "OMAP34xx Based System" + depends on ARCH_OMAP3 + +config ARCH_OMAP3430 + bool "OMAP3430 support" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select ARCH_OMAP_OTG + comment "OMAP Board Type" - depends on ARCH_OMAP2 + depends on ARCH_OMAP2 || ARCH_OMAP3 config MACH_OMAP_GENERIC bool "Generic OMAP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 800639e7c6a..0dc40db3811 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o # Functions loaded to SRAM obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o +obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o # Power Management ifeq ($(CONFIG_PM),y) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 149bfba43cf..375ad27479c 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -220,6 +220,11 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); + if (cpu_is_omap34xx()) { + GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus); + GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access); + } + /* caller is expected to have initialized CONFIG1 to cover * at least sync vs async */ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 03c6ab1a3b1..71a9de382d2 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -43,7 +43,9 @@ * The machine specific code may provide the extra mapping besides the * default mapping provided here. */ -static struct map_desc omap2_io_desc[] __initdata = { + +#ifdef CONFIG_ARCH_OMAP24XX +static struct map_desc omap24xx_io_desc[] __initdata = { { .virtual = L3_24XX_VIRT, .pfn = __phys_to_pfn(L3_24XX_PHYS), @@ -51,12 +53,39 @@ static struct map_desc omap2_io_desc[] __initdata = { .type = MT_DEVICE }, { - .virtual = L4_24XX_VIRT, - .pfn = __phys_to_pfn(L4_24XX_PHYS), - .length = L4_24XX_SIZE, - .type = MT_DEVICE + .virtual = L4_24XX_VIRT, + .pfn = __phys_to_pfn(L4_24XX_PHYS), + .length = L4_24XX_SIZE, + .type = MT_DEVICE + }, +}; + +#ifdef CONFIG_ARCH_OMAP2420 +static struct map_desc omap242x_io_desc[] __initdata = { + { + .virtual = DSP_MEM_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), + .length = DSP_MEM_24XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = DSP_IPI_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), + .length = DSP_IPI_24XX_SIZE, + .type = MT_DEVICE }, + { + .virtual = DSP_MMU_24XX_VIRT, + .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), + .length = DSP_MMU_24XX_SIZE, + .type = MT_DEVICE + }, +}; + +#endif + #ifdef CONFIG_ARCH_OMAP2430 +static struct map_desc omap243x_io_desc[] __initdata = { { .virtual = L4_WK_243X_VIRT, .pfn = __phys_to_pfn(L4_WK_243X_PHYS), @@ -69,30 +98,90 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = OMAP243X_GPMC_SIZE, .type = MT_DEVICE }, + { + .virtual = OMAP243X_SDRC_VIRT, + .pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS), + .length = OMAP243X_SDRC_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP243X_SMS_VIRT, + .pfn = __phys_to_pfn(OMAP243X_SMS_PHYS), + .length = OMAP243X_SMS_SIZE, + .type = MT_DEVICE + }, +}; #endif +#endif + +#ifdef CONFIG_ARCH_OMAP34XX +static struct map_desc omap34xx_io_desc[] __initdata = { { - .virtual = DSP_MEM_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), - .length = DSP_MEM_24XX_SIZE, + .virtual = L3_34XX_VIRT, + .pfn = __phys_to_pfn(L3_34XX_PHYS), + .length = L3_34XX_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_IPI_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_IPI_24XX_PHYS), - .length = DSP_IPI_24XX_SIZE, + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, .type = MT_DEVICE }, { - .virtual = DSP_MMU_24XX_VIRT, - .pfn = __phys_to_pfn(DSP_MMU_24XX_PHYS), - .length = DSP_MMU_24XX_SIZE, + .virtual = L4_WK_34XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_34XX_PHYS), + .length = L4_WK_34XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP34XX_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS), + .length = OMAP34XX_GPMC_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP343X_SMS_VIRT, + .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS), + .length = OMAP343X_SMS_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP343X_SDRC_VIRT, + .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS), + .length = OMAP343X_SDRC_SIZE, .type = MT_DEVICE - } + }, + { + .virtual = L4_PER_34XX_VIRT, + .pfn = __phys_to_pfn(L4_PER_34XX_PHYS), + .length = L4_PER_34XX_SIZE, + .type = MT_DEVICE + }, + { + .virtual = L4_EMU_34XX_VIRT, + .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS), + .length = L4_EMU_34XX_SIZE, + .type = MT_DEVICE + }, }; +#endif void __init omap2_map_common_io(void) { - iotable_init(omap2_io_desc, ARRAY_SIZE(omap2_io_desc)); +#if defined(CONFIG_ARCH_OMAP2420) + iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); + iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc)); +#endif + +#if defined(CONFIG_ARCH_OMAP2430) + iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc)); + iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc)); +#endif + +#if defined(CONFIG_ARCH_OMAP34XX) + iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc)); +#endif /* Normally devicemaps_init() would flush caches and tlb after * mdesc->map_io(), but we must also do it here because of the CPU @@ -112,11 +201,6 @@ void __init omap2_init_common_hw(void) pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); -/* - * Need to Fix this for 2430 - */ -#ifndef CONFIG_ARCH_OMAP2430 omap2_init_memory(); -#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index c39e26dc5ee..d354e0fe447 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -128,6 +128,8 @@ void __init omap_init_irq(void) if (cpu_is_omap24xx()) bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE); + else if (cpu_is_omap34xx()) + bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE); omap_irq_bank_init_one(bank); diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 6b49cc9cbdc..48b01f4cebc 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -102,6 +102,17 @@ u32 omap2_reprogram_sdrc(u32 level, u32 force) return prev; } +#if !defined(CONFIG_ARCH_OMAP2) +void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, + u32 base_cs, u32 force_unlock) +{ +} +void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, + u32 mem_type) +{ +} +#endif + void omap2_init_memory_params(u32 force_lock_to_unlock_mode) { unsigned long dll_cnt; @@ -166,6 +177,9 @@ void __init omap2_init_memory(void) { u32 l; + if (!cpu_is_omap2420()) + return; + l = sms_read_reg(SMS_SYSCONFIG); l &= ~(0x3 << 3); l |= (0x2 << 3); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 6188e2f9785..5558803cd99 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -298,13 +298,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, /* TLL - HSUSB: 12-pin TLL Port 1*/ MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, @@ -324,13 +324,13 @@ MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, /* TLL - HSUSB: 12-pin TLL Port 2*/ MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, @@ -350,13 +350,13 @@ MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, /* TLL - HSUSB: 12-pin TLL Port 3*/ MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, @@ -373,6 +373,49 @@ MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) + +/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ +MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + +/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ +MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, + OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) + +/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ +MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) +MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, + OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) + }; #define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S new file mode 100644 index 00000000000..2c714613634 --- /dev/null +++ b/arch/arm/mach-omap2/sram34xx.S @@ -0,0 +1,179 @@ +/* + * linux/arch/arm/mach-omap3/sram.S + * + * Omap3 specific functions that need to be run in internal SRAM + * + * (C) Copyright 2007 + * Texas Instruments Inc. + * Rajendra Nayak <rnayak@ti.com> + * + * (C) Copyright 2004 + * Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/hardware.h> + +#include <mach/io.h> + +#include "sdrc.h" +#include "cm.h" + + .text + +/* + * Change frequency of core dpll + * r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2 + */ +ENTRY(omap3_sram_configure_core_dpll) + stmfd sp!, {r1-r12, lr} @ store regs to stack + cmp r3, #0x2 + blne configure_sdrc + cmp r3, #0x2 + blne lock_dll + cmp r3, #0x1 + blne unlock_dll + bl sdram_in_selfrefresh @ put the SDRAM in self refresh + bl configure_core_dpll + bl enable_sdrc + cmp r3, #0x1 + blne wait_dll_unlock + cmp r3, #0x2 + blne wait_dll_lock + cmp r3, #0x1 + blne configure_sdrc + mov r0, #0 @ return value + ldmfd sp!, {r1-r12, pc} @ restore regs and return +unlock_dll: + ldr r4, omap3_sdrc_dlla_ctrl + ldr r5, [r4] + orr r5, r5, #0x4 + str r5, [r4] + bx lr +lock_dll: + ldr r4, omap3_sdrc_dlla_ctrl + ldr r5, [r4] + bic r5, r5, #0x4 + str r5, [r4] + bx lr +sdram_in_selfrefresh: + mov r5, #0x0 @ Move 0 to R5 + mcr p15, 0, r5, c7, c10, 5 @ memory barrier + ldr r4, omap3_sdrc_power @ read the SDRC_POWER register + ldr r5, [r4] @ read the contents of SDRC_POWER + orr r5, r5, #0x40 @ enable self refresh on idle req + str r5, [r4] @ write back to SDRC_POWER register + ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg + ldr r5, [r4] + bic r5, r5, #0x2 @ disable iclk bit for SRDC + str r5, [r4] +wait_sdrc_idle: + ldr r4, omap3_cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 @ check for SDRC idle + cmp r5, #2 + bne wait_sdrc_idle + bx lr +configure_core_dpll: + ldr r4, omap3_cm_clksel1_pll + ldr r5, [r4] + ldr r6, core_m2_mask_val @ modify m2 for core dpll + and r5, r5, r6 + orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val + str r5, [r4] + mov r5, #0x800 @ wait for the clock to stabilise + cmp r3, #2 + bne wait_clk_stable + bx lr +wait_clk_stable: + subs r5, r5, #1 + bne wait_clk_stable + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + bx lr +enable_sdrc: + ldr r4, omap3_cm_iclken1_core + ldr r5, [r4] + orr r5, r5, #0x2 @ enable iclk bit for SDRC + str r5, [r4] +wait_sdrc_idle1: + ldr r4, omap3_cm_idlest1_core + ldr r5, [r4] + and r5, r5, #0x2 + cmp r5, #0 + bne wait_sdrc_idle1 + ldr r4, omap3_sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + bx lr +wait_dll_lock: + ldr r4, omap3_sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + bx lr +wait_dll_unlock: + ldr r4, omap3_sdrc_dlla_status + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x0 + bne wait_dll_unlock + bx lr +configure_sdrc: + ldr r4, omap3_sdrc_rfr_ctrl + str r0, [r4] + ldr r4, omap3_sdrc_actim_ctrla + str r1, [r4] + ldr r4, omap3_sdrc_actim_ctrlb + str r2, [r4] + bx lr + +omap3_sdrc_power: + .word OMAP34XX_SDRC_REGADDR(SDRC_POWER) +omap3_cm_clksel1_pll: + .word OMAP34XX_CM_REGADDR(PLL_MOD, CM_CLKSEL1) +omap3_cm_idlest1_core: + .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST) +omap3_cm_iclken1_core: + .word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1) +omap3_sdrc_rfr_ctrl: + .word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0) +omap3_sdrc_actim_ctrla: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0) +omap3_sdrc_actim_ctrlb: + .word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0) +omap3_sdrc_dlla_status: + .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS) +omap3_sdrc_dlla_ctrl: + .word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL) +core_m2_mask_val: + .word 0x07FFFFFF + +ENTRY(omap3_sram_configure_core_dpll_sz) + .word . - omap3_sram_configure_core_dpll diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ef62bf21e17..a94f0c44ebc 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -15,6 +15,9 @@ config ARCH_OMAP1 config ARCH_OMAP2 bool "TI OMAP2" +config ARCH_OMAP3 + bool "TI OMAP3" + endchoice comment "OMAP Feature Selections" @@ -112,13 +115,13 @@ config OMAP_MPU_TIMER config OMAP_32K_TIMER bool "Use 32KHz timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to enable the OMAP 32KHz timer. This timer saves power compared to the OMAP_MPU_TIMER, and has support for no tick during idle. The 32KHz timer provides less intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is - currently only available for OMAP16XX and 24XX. + currently only available for OMAP16XX, 24XX and 34XX. endchoice @@ -133,7 +136,7 @@ config OMAP_32K_TIMER_HZ config OMAP_DM_TIMER bool "Use dual-mode timer" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help Select this option if you want to use OMAP Dual-Mode timers. diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 1c1d831a0c0..2625ce32e60 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -94,6 +94,10 @@ static inline void omap_init_dsp(void) { } static void omap_init_kp(void) { + /* 2430 and 34xx keypad is on TWL4030 */ + if (cpu_is_omap2430() || cpu_is_omap34xx()) + return; + if (machine_is_omap_h2() || machine_is_omap_h3()) { omap_cfg_reg(F18_1610_KBC0); omap_cfg_reg(D20_1610_KBC1); @@ -395,8 +399,17 @@ static inline void omap_init_uwire(void) {} #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -#ifdef CONFIG_ARCH_OMAP24XX +#if defined(CONFIG_ARCH_OMAP34XX) +#define OMAP_WDT_BASE 0x48314000 +#elif defined(CONFIG_ARCH_OMAP24XX) + +#ifdef CONFIG_ARCH_OMAP2430 +/* WDT2 */ +#define OMAP_WDT_BASE 0x49016000 +#else #define OMAP_WDT_BASE 0x48022000 +#endif + #else #define OMAP_WDT_BASE 0xfffeb000 #endif diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S index 1b0039bdeb4..1b11f5c6a2d 100644 --- a/arch/arm/plat-omap/include/mach/debug-macro.S +++ b/arch/arm/plat-omap/include/mach/debug-macro.S @@ -35,6 +35,18 @@ #ifdef CONFIG_OMAP_LL_DEBUG_UART3 add \rx, \rx, #0x00004000 @ UART 3 #endif + +#elif CONFIG_ARCH_OMAP3 + moveq \rx, #0x48000000 @ physical base address + movne \rx, #0xd8000000 @ virtual base + orr \rx, \rx, #0x0006a000 +#ifdef CONFIG_OMAP_LL_DEBUG_UART2 + add \rx, \rx, #0x00002000 @ UART 2 +#endif +#ifdef CONFIG_OMAP_LL_DEBUG_UART3 + add \rx, \rx, #0x00fb0000 @ UART 3 + add \rx, \rx, #0x00006000 +#endif #endif .endm diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index d4e9043bf20..030118ee204 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -55,9 +55,17 @@ 1510: .endm -#elif defined(CONFIG_ARCH_OMAP24XX) +#endif +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) +#if defined(CONFIG_ARCH_OMAP24XX) #include <mach/omap24xx.h> +#endif +#if defined(CONFIG_ARCH_OMAP34XX) +#include <mach/omap34xx.h> +#endif + +#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt number */ .macro disable_fiq .endm @@ -79,7 +87,7 @@ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */ cmp \irqnr, #0x0 2222: - ldrne \irqnr, [\base, #IRQ_SIR_IRQ] + ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET] .endm diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h index 3c7b425c585..45b678439bb 100644 --- a/arch/arm/plat-omap/include/mach/gpmc.h +++ b/arch/arm/plat-omap/include/mach/gpmc.h @@ -84,6 +84,10 @@ struct gpmc_timings { u16 access; /* Start-cycle to first data valid delay */ u16 rd_cycle; /* Total read cycle time */ u16 wr_cycle; /* Total write cycle time */ + + /* The following are only on OMAP3430 */ + u16 wr_access; /* WRACCESSTIME */ + u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h index dd0cf069431..adc83b7b820 100644 --- a/arch/arm/plat-omap/include/mach/io.h +++ b/arch/arm/plat-omap/include/mach/io.h @@ -73,7 +73,6 @@ #define L4_24XX_VIRT 0xd8000000 #define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ -#ifdef CONFIG_ARCH_OMAP2430 #define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 */ #define L4_WK_243X_VIRT 0xd9000000 #define L4_WK_243X_SIZE SZ_1M @@ -87,8 +86,6 @@ #define OMAP243X_SMS_VIRT 0xFC000000 #define OMAP243X_SMS_SIZE SZ_1M -#endif - #define IO_OFFSET 0x90000000 #define __IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ #define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET) /* Works for L3 and L4 */ diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index e9fd63055cb..9ee04969d36 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -286,6 +286,41 @@ #define INT_24XX_USB_IRQ_OTG 80 #define INT_24XX_MMC_IRQ 83 +#define INT_34XX_BENCH_MPU_EMUL 3 +#define INT_34XX_ST_MCBSP2_IRQ 4 +#define INT_34XX_ST_MCBSP3_IRQ 5 +#define INT_34XX_SSM_ABORT_IRQ 6 +#define INT_34XX_SYS_NIRQ 7 +#define INT_34XX_D2D_FW_IRQ 8 +#define INT_34XX_PRCM_MPU_IRQ 11 +#define INT_34XX_MCBSP1_IRQ 16 +#define INT_34XX_MCBSP2_IRQ 17 +#define INT_34XX_MCBSP3_IRQ 22 +#define INT_34XX_MCBSP4_IRQ 23 +#define INT_34XX_CAM_IRQ 24 +#define INT_34XX_MCBSP5_IRQ 27 +#define INT_34XX_GPIO_BANK1 29 +#define INT_34XX_GPIO_BANK2 30 +#define INT_34XX_GPIO_BANK3 31 +#define INT_34XX_GPIO_BANK4 32 +#define INT_34XX_GPIO_BANK5 33 +#define INT_34XX_GPIO_BANK6 34 +#define INT_34XX_USIM_IRQ 35 +#define INT_34XX_WDT3_IRQ 36 +#define INT_34XX_SPI4_IRQ 48 +#define INT_34XX_SHA1MD52_IRQ 49 +#define INT_34XX_FPKA_READY_IRQ 50 +#define INT_34XX_SHA1MD51_IRQ 51 +#define INT_34XX_RNG_IRQ 52 +#define INT_34XX_I2C3_IRQ 61 +#define INT_34XX_FPKA_ERROR_IRQ 64 +#define INT_34XX_PBIAS_IRQ 75 +#define INT_34XX_OHCI_IRQ 76 +#define INT_34XX_EHCI_IRQ 77 +#define INT_34XX_TLL_IRQ 78 +#define INT_34XX_PARTHASH_IRQ 79 +#define INT_34XX_MMC3_IRQ 94 +#define INT_34XX_GPT12_IRQ 95 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index a3074f2fb7c..c8d0aa118be 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -91,7 +91,7 @@ #define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX #define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX -#elif defined(CONFIG_ARCH_OMAP24XX) +#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x04 diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index a325caf80d0..d40cac60b95 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -38,7 +38,7 @@ */ #if defined(CONFIG_ARCH_OMAP1) #define PHYS_OFFSET UL(0x10000000) -#elif defined(CONFIG_ARCH_OMAP2) +#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) #define PHYS_OFFSET UL(0x80000000) #endif diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 5670d563f37..6bbf1789bed 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -723,7 +723,31 @@ enum omap34xx_index { AB12_3430_USB3HS_TLL_DATA4, AB13_3430_USB3HS_TLL_DATA5, AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7 + AA12_3430_USB3HS_TLL_DATA7, + + /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ + AF10_3430_USB1FS_PHY_MM1_RXDP, + AG9_3430_USB1FS_PHY_MM1_RXDM, + W13_3430_USB1FS_PHY_MM1_RXRCV, + W12_3430_USB1FS_PHY_MM1_TXSE0, + W11_3430_USB1FS_PHY_MM1_TXDAT, + Y11_3430_USB1FS_PHY_MM1_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ + AF7_3430_USB2FS_PHY_MM2_RXDP, + AH7_3430_USB2FS_PHY_MM2_RXDM, + AB10_3430_USB2FS_PHY_MM2_RXRCV, + AB9_3430_USB2FS_PHY_MM2_TXSE0, + W3_3430_USB2FS_PHY_MM2_TXDAT, + T4_3430_USB2FS_PHY_MM2_TXEN_N, + + /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ + AH3_3430_USB3FS_PHY_MM3_RXDP, + AE3_3430_USB3FS_PHY_MM3_RXDM, + AD1_3430_USB3FS_PHY_MM3_RXRCV, + AE1_3430_USB3FS_PHY_MM3_TXSE0, + AD2_3430_USB3FS_PHY_MM3_TXDAT, + AC1_3430_USB3FS_PHY_MM3_TXEN_N, }; diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h index 556f0eb4d55..24335d4932f 100644 --- a/arch/arm/plat-omap/include/mach/omap24xx.h +++ b/arch/arm/plat-omap/include/mach/omap24xx.h @@ -39,7 +39,6 @@ /* interrupt controller */ #define OMAP24XX_IC_BASE (L4_24XX_BASE + 0xfe000) #define OMAP24XX_IVA_INTC_BASE 0x40000000 -#define IRQ_SIR_IRQ 0x0040 #define OMAP2420_CTRL_BASE L4_24XX_BASE #define OMAP2420_32KSYNCT_BASE (L4_24XX_BASE + 0x4000) diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h index 25ee3819faa..a98c6c3beb2 100644 --- a/arch/arm/plat-omap/include/mach/sdrc.h +++ b/arch/arm/plat-omap/include/mach/sdrc.h @@ -25,8 +25,8 @@ #define SDRC_DLLB_STATUS 0x06C #define SDRC_POWER 0x070 #define SDRC_MR_0 0x084 -#define SDRC_ACTIM_CTRL_A 0x09c -#define SDRC_ACTIM_CTRL_B 0x0a0 +#define SDRC_ACTIM_CTRL_A_0 0x09c +#define SDRC_ACTIM_CTRL_B_0 0x0a0 #define SDRC_RFR_CTRL_0 0x0a4 /* diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h index e0932344998..ab35d622dcf 100644 --- a/arch/arm/plat-omap/include/mach/sram.h +++ b/arch/arm/plat-omap/include/mach/sram.h @@ -21,6 +21,10 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass); +extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); + /* Do not use these */ extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl); extern unsigned long omap1_sram_reprogram_clock_sz; @@ -53,4 +57,10 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type); extern unsigned long omap243x_sram_reprogram_sdrc_sz; + +extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2); +extern unsigned long omap3_sram_configure_core_dpll_sz; + #endif diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h index 06a28c7b98d..06923f26154 100644 --- a/arch/arm/plat-omap/include/mach/system.h +++ b/arch/arm/plat-omap/include/mach/system.h @@ -40,7 +40,7 @@ static inline void omap1_arch_reset(char mode) static inline void arch_reset(char mode) { - if (!cpu_is_omap24xx()) + if (!cpu_class_is_omap2()) omap1_arch_reset(mode); else omap_prcm_arch_reset(mode); diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index 0253c456ed5..af326efc1ad 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -47,11 +47,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) } #endif #ifdef CONFIG_ARCH_OMAP2 - if (cpu_class_is_omap2()) { + if (cpu_is_omap24xx()) { if (BETWEEN(p, L3_24XX_PHYS, L3_24XX_SIZE)) return XLATE(p, L3_24XX_PHYS, L3_24XX_VIRT); if (BETWEEN(p, L4_24XX_PHYS, L4_24XX_SIZE)) return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT); + } + if (cpu_is_omap2420()) { if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE)) return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT); if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE)) @@ -59,14 +61,36 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE)) return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT); } -#ifdef CONFIG_ARCH_OMAP2430 if (cpu_is_omap2430()) { if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE)) - return XLATE(L4_WK_243X_PHYS, L4_WK_243X_VIRT); + return XLATE(p, L4_WK_243X_PHYS, L4_WK_243X_VIRT); if (BETWEEN(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_SIZE)) - return XLATE(OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + return XLATE(p, OMAP243X_GPMC_PHYS, OMAP243X_GPMC_VIRT); + if (BETWEEN(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_SIZE)) + return XLATE(p, OMAP243X_SDRC_PHYS, OMAP243X_SDRC_VIRT); + if (BETWEEN(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_SIZE)) + return XLATE(p, OMAP243X_SMS_PHYS, OMAP243X_SMS_VIRT); } #endif +#ifdef CONFIG_ARCH_OMAP3 + if (cpu_is_omap34xx()) { + if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) + return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); + if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) + return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE)) + return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT); + if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE)) + return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT); + if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE)) + return XLATE(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_VIRT); + if (BETWEEN(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_SIZE)) + return XLATE(p, OMAP343X_SDRC_PHYS, OMAP343X_SDRC_VIRT); + if (BETWEEN(p, L4_PER_34XX_PHYS, L4_PER_34XX_SIZE)) + return XLATE(p, L4_PER_34XX_PHYS, L4_PER_34XX_VIRT); + if (BETWEEN(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_SIZE)) + return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT); + } #endif return __arm_ioremap(p, size, type); diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ac67eeb6ca6..4d22452a074 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -271,7 +271,7 @@ int __init omap1_sram_init(void) #define omap1_sram_init() do {} while (0) #endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +#if defined(CONFIG_ARCH_OMAP2) static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl, u32 base_cs, u32 force_unlock); @@ -352,23 +352,19 @@ static inline int omap243x_sram_init(void) #ifdef CONFIG_ARCH_OMAP3 -static u32 (*_omap2_sram_reprogram_gpmc)(u32 perf_level); -u32 omap2_sram_reprogram_gpmc(u32 perf_level) -{ - if (!_omap2_sram_reprogram_gpmc) - omap_sram_error(); - - return _omap2_sram_reprogram_gpmc(perf_level); -} - -static u32 (*_omap2_sram_configure_core_dpll)(u32 m, u32 n, - u32 freqsel, u32 m2); -u32 omap2_sram_configure_core_dpll(u32 m, u32 n, u32 freqsel, u32 m2) +static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl, + u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, + u32 m2); +u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla, + u32 sdrc_actim_ctrlb, u32 m2) { - if (!_omap2_sram_configure_core_dpll) + if (!_omap3_sram_configure_core_dpll) omap_sram_error(); - return _omap2_sram_configure_core_dpll(m, n, freqsel, m2); + return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl, + sdrc_actim_ctrla, + sdrc_actim_ctrlb, m2); } /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */ @@ -376,31 +372,16 @@ void restore_sram_functions(void) { omap_sram_ceil = omap_sram_base + omap_sram_size; - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); } int __init omap34xx_sram_init(void) { - _omap2_sram_ddr_init = omap_sram_push(omap34xx_sram_ddr_init, - omap34xx_sram_ddr_init_sz); - - _omap2_sram_reprogram_sdrc = omap_sram_push(omap34xx_sram_reprogram_sdrc, - omap34xx_sram_reprogram_sdrc_sz); - - _omap2_set_prcm = omap_sram_push(omap34xx_sram_set_prcm, - omap34xx_sram_set_prcm_sz); - - _omap2_sram_reprogram_gpmc = omap_sram_push(omap34xx_sram_reprogram_gpmc, - omap34xx_sram_reprogram_gpmc_sz); - - _omap2_sram_configure_core_dpll = - omap_sram_push(omap34xx_sram_configure_core_dpll, - omap34xx_sram_configure_core_dpll_sz); + _omap3_sram_configure_core_dpll = + omap_sram_push(omap3_sram_configure_core_dpll, + omap3_sram_configure_core_dpll_sz); return 0; } |