diff options
| -rw-r--r-- | drivers/net/ethernet/smsc/smc9194.c | 24 |
1 files changed, 0 insertions, 24 deletions
diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c index e85c2e7e824..afd9873e9bd 100644 --- a/drivers/net/ethernet/smsc/smc9194.c +++ b/drivers/net/ethernet/smsc/smc9194.c @@ -95,14 +95,6 @@ static const char version[] = #define USE_32_BIT 1 #endif -#if defined(__H8300H__) || defined(__H8300S__) -#define NO_AUTOPROBE -#undef insl -#undef outsl -#define insl(a,b,l) io_insl_noswap(a,b,l) -#define outsl(a,b,l) io_outsl_noswap(a,b,l) -#endif - /* .the SMC9194 can be at any of the following port addresses. To change, .for a slightly different card, you can add it to the array. Keep in @@ -114,12 +106,6 @@ struct devlist { unsigned int irq; }; -#if defined(CONFIG_H8S_EDOSK2674) -static struct devlist smc_devlist[] __initdata = { - {.port = 0xf80000, .irq = 16}, - {.port = 0, .irq = 0 }, -}; -#else static struct devlist smc_devlist[] __initdata = { {.port = 0x200, .irq = 0}, {.port = 0x220, .irq = 0}, @@ -139,7 +125,6 @@ static struct devlist smc_devlist[] __initdata = { {.port = 0x3E0, .irq = 0}, {.port = 0, .irq = 0}, }; -#endif /* . Wait time for memory to be free. This probably shouldn't be . tuned that much, as waiting for this means nothing else happens @@ -651,11 +636,7 @@ static void smc_hardware_send_packet( struct net_device * dev ) #ifdef USE_32_BIT if ( length & 0x2 ) { outsl(ioaddr + DATA_1, buf, length >> 2 ); -#if !defined(__H8300H__) && !defined(__H8300S__) outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1); -#else - ctrl_outw( *((word *)(buf + (length & 0xFFFFFFFC))),ioaddr +DATA_1); -#endif } else outsl(ioaddr + DATA_1, buf, length >> 2 ); @@ -899,7 +880,6 @@ static int __init smc_probe(struct net_device *dev, int ioaddr) retval = -ENODEV; goto err_out; } -#if !defined(CONFIG_H8S_EDOSK2674) /* well, we've already written once, so hopefully another time won't hurt. This time, I need to switch the bank register to bank 1, so I can access the base address register */ @@ -914,10 +894,6 @@ static int __init smc_probe(struct net_device *dev, int ioaddr) retval = -ENODEV; goto err_out; } -#else - (void)base_address_register; /* Warning suppression */ -#endif - /* check if the revision register is something that I recognize. These might need to be added to later, as future revisions |