diff options
-rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192de/hw.c | 2325 | ||||
-rw-r--r-- | drivers/net/wireless/rtlwifi/rtl8192de/hw.h | 66 |
2 files changed, 2391 insertions, 0 deletions
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c new file mode 100644 index 00000000000..eedfb38bec8 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -0,0 +1,2325 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#include "../wifi.h" +#include "../efuse.h" +#include "../base.h" +#include "../regd.h" +#include "../cam.h" +#include "../ps.h" +#include "../pci.h" +#include "reg.h" +#include "def.h" +#include "phy.h" +#include "dm.h" +#include "fw.h" +#include "led.h" +#include "sw.h" +#include "hw.h" + +u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, u8 direct) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u32 value; + + rtl_write_word(rtlpriv, REG_DBI_CTRL, (offset & 0xFFC)); + rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(1) | direct); + udelay(10); + value = rtl_read_dword(rtlpriv, REG_DBI_RDATA); + return value; +} + +void rtl92de_write_dword_dbi(struct ieee80211_hw *hw, + u16 offset, u32 value, u8 direct) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtl_write_word(rtlpriv, REG_DBI_CTRL, ((offset & 0xFFC) | 0xF000)); + rtl_write_dword(rtlpriv, REG_DBI_WDATA, value); + rtl_write_byte(rtlpriv, REG_DBI_FLAG, BIT(0) | direct); +} + +static void _rtl92de_set_bcn_ctrl_reg(struct ieee80211_hw *hw, + u8 set_bits, u8 clear_bits) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpci->reg_bcn_ctrl_val |= set_bits; + rtlpci->reg_bcn_ctrl_val &= ~clear_bits; + rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val); +} + +static void _rtl92de_stop_tx_beacon(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 tmp1byte; + + tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); + rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6))); + rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff); + rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64); + tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); + tmp1byte &= ~(BIT(0)); + rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); +} + +static void _rtl92de_resume_tx_beacon(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 tmp1byte; + + tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2); + rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6)); + rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); + rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); + tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2); + tmp1byte |= BIT(0); + rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte); +} + +static void _rtl92de_enable_bcn_sub_func(struct ieee80211_hw *hw) +{ + _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(1)); +} + +static void _rtl92de_disable_bcn_sub_func(struct ieee80211_hw *hw) +{ + _rtl92de_set_bcn_ctrl_reg(hw, BIT(1), 0); +} + +void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + switch (variable) { + case HW_VAR_RCR: + *((u32 *) (val)) = rtlpci->receive_config; + break; + case HW_VAR_RF_STATE: + *((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state; + break; + case HW_VAR_FWLPS_RF_ON:{ + enum rf_pwrstate rfState; + u32 val_rcr; + + rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE, + (u8 *) (&rfState)); + if (rfState == ERFOFF) { + *((bool *) (val)) = true; + } else { + val_rcr = rtl_read_dword(rtlpriv, REG_RCR); + val_rcr &= 0x00070000; + if (val_rcr) + *((bool *) (val)) = false; + else + *((bool *) (val)) = true; + } + break; + } + case HW_VAR_FW_PSMODE_STATUS: + *((bool *) (val)) = ppsc->fw_current_inpsmode; + break; + case HW_VAR_CORRECT_TSF:{ + u64 tsf; + u32 *ptsf_low = (u32 *)&tsf; + u32 *ptsf_high = ((u32 *)&tsf) + 1; + + *ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4)); + *ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR); + *((u64 *) (val)) = tsf; + break; + } + case HW_VAR_INT_MIGRATION: + *((bool *)(val)) = rtlpriv->dm.interrupt_migration; + break; + case HW_VAR_INT_AC: + *((bool *)(val)) = rtlpriv->dm.disable_tx_int; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } +} + +void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + u8 idx; + + switch (variable) { + case HW_VAR_ETHER_ADDR: + for (idx = 0; idx < ETH_ALEN; idx++) { + rtl_write_byte(rtlpriv, (REG_MACID + idx), + val[idx]); + } + break; + case HW_VAR_BASIC_RATE: { + u16 rate_cfg = ((u16 *) val)[0]; + u8 rate_index = 0; + + rate_cfg = rate_cfg & 0x15f; + if (mac->vendor == PEER_CISCO && + ((rate_cfg & 0x150) == 0)) + rate_cfg |= 0x01; + rtl_write_byte(rtlpriv, REG_RRSR, rate_cfg & 0xff); + rtl_write_byte(rtlpriv, REG_RRSR + 1, + (rate_cfg >> 8) & 0xff); + while (rate_cfg > 0x1) { + rate_cfg = (rate_cfg >> 1); + rate_index++; + } + if (rtlhal->fw_version > 0xe) + rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, + rate_index); + break; + } + case HW_VAR_BSSID: + for (idx = 0; idx < ETH_ALEN; idx++) { + rtl_write_byte(rtlpriv, (REG_BSSID + idx), + val[idx]); + } + break; + case HW_VAR_SIFS: + rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]); + rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]); + rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]); + rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]); + if (!mac->ht_enable) + rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, + 0x0e0e); + else + rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM, + *((u16 *) val)); + break; + case HW_VAR_SLOT_TIME: { + u8 e_aci; + + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("HW_VAR_SLOT_TIME %x\n", val[0])); + rtl_write_byte(rtlpriv, REG_SLOT, val[0]); + for (e_aci = 0; e_aci < AC_MAX; e_aci++) + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_AC_PARAM, + (u8 *) (&e_aci)); + break; + } + case HW_VAR_ACK_PREAMBLE: { + u8 reg_tmp; + u8 short_preamble = (bool) (*(u8 *) val); + + reg_tmp = (mac->cur_40_prime_sc) << 5; + if (short_preamble) + reg_tmp |= 0x80; + rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp); + break; + } + case HW_VAR_AMPDU_MIN_SPACE: { + u8 min_spacing_to_set; + u8 sec_min_space; + + min_spacing_to_set = *((u8 *) val); + if (min_spacing_to_set <= 7) { + sec_min_space = 0; + if (min_spacing_to_set < sec_min_space) + min_spacing_to_set = sec_min_space; + mac->min_space_cfg = ((mac->min_space_cfg & 0xf8) | + min_spacing_to_set); + *val = min_spacing_to_set; + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", + mac->min_space_cfg)); + rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, + mac->min_space_cfg); + } + break; + } + case HW_VAR_SHORTGI_DENSITY: { + u8 density_to_set; + + density_to_set = *((u8 *) val); + mac->min_space_cfg = rtlpriv->rtlhal.minspace_cfg; + mac->min_space_cfg |= (density_to_set << 3); + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("Set HW_VAR_SHORTGI_DENSITY: %#x\n", + mac->min_space_cfg)); + rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, + mac->min_space_cfg); + break; + } + case HW_VAR_AMPDU_FACTOR: { + u8 factor_toset; + u32 regtoSet; + u8 *ptmp_byte = NULL; + u8 index; + + if (rtlhal->macphymode == DUALMAC_DUALPHY) + regtoSet = 0xb9726641; + else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) + regtoSet = 0x66626641; + else + regtoSet = 0xb972a841; + factor_toset = *((u8 *) val); + if (factor_toset <= 3) { + factor_toset = (1 << (factor_toset + 2)); + if (factor_toset > 0xf) + factor_toset = 0xf; + for (index = 0; index < 4; index++) { + ptmp_byte = (u8 *) (®toSet) + index; + if ((*ptmp_byte & 0xf0) > + (factor_toset << 4)) + *ptmp_byte = (*ptmp_byte & 0x0f) + | (factor_toset << 4); + if ((*ptmp_byte & 0x0f) > factor_toset) + *ptmp_byte = (*ptmp_byte & 0xf0) + | (factor_toset); + } + rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, regtoSet); + RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD, + ("Set HW_VAR_AMPDU_FACTOR: %#x\n", + factor_toset)); + } + break; + } + case HW_VAR_AC_PARAM: { + u8 e_aci = *((u8 *) val); + rtl92d_dm_init_edca_turbo(hw); + if (rtlpci->acm_method != eAcmWay2_SW) + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACM_CTRL, + (u8 *) (&e_aci)); + break; + } + case HW_VAR_ACM_CTRL: { + u8 e_aci = *((u8 *) val); + union aci_aifsn *p_aci_aifsn = + (union aci_aifsn *)(&(mac->ac[0].aifs)); + u8 acm = p_aci_aifsn->f.acm; + u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL); + + acm_ctrl = acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1); + if (acm) { + switch (e_aci) { + case AC0_BE: + acm_ctrl |= ACMHW_BEQEN; + break; + case AC2_VI: + acm_ctrl |= ACMHW_VIQEN; + break; + case AC3_VO: + acm_ctrl |= ACMHW_VOQEN; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("HW_VAR_ACM_CTRL acm set " + "failed: eACI is %d\n", acm)); + break; + } + } else { + switch (e_aci) { + case AC0_BE: + acm_ctrl &= (~ACMHW_BEQEN); + break; + case AC2_VI: + acm_ctrl &= (~ACMHW_VIQEN); + break; + case AC3_VO: + acm_ctrl &= (~ACMHW_VOQEN); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } + } + RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE, + ("SetHwReg8190pci(): [HW_VAR_ACM_CTRL] " + "Write 0x%X\n", acm_ctrl)); + rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl); + break; + } + case HW_VAR_RCR: + rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]); + rtlpci->receive_config = ((u32 *) (val))[0]; + break; + case HW_VAR_RETRY_LIMIT: { + u8 retry_limit = ((u8 *) (val))[0]; + + rtl_write_word(rtlpriv, REG_RL, + retry_limit << RETRY_LIMIT_SHORT_SHIFT | + retry_limit << RETRY_LIMIT_LONG_SHIFT); + break; + } + case HW_VAR_DUAL_TSF_RST: + rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1))); + break; + case HW_VAR_EFUSE_BYTES: + rtlefuse->efuse_usedbytes = *((u16 *) val); + break; + case HW_VAR_EFUSE_USAGE: + rtlefuse->efuse_usedpercentage = *((u8 *) val); + break; + case HW_VAR_IO_CMD: + rtl92d_phy_set_io_cmd(hw, (*(enum io_type *)val)); + break; + case HW_VAR_WPA_CONFIG: + rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val)); + break; + case HW_VAR_SET_RPWM: + rtl92d_fill_h2c_cmd(hw, H2C_PWRM, 1, (u8 *) (val)); + break; + case HW_VAR_H2C_FW_PWRMODE: + break; + case HW_VAR_FW_PSMODE_STATUS: + ppsc->fw_current_inpsmode = *((bool *) val); + break; + case HW_VAR_H2C_FW_JOINBSSRPT: { + u8 mstatus = (*(u8 *) val); + u8 tmp_regcr, tmp_reg422; + bool recover = false; + + if (mstatus == RT_MEDIA_CONNECT) { + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_AID, NULL); + tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1); + rtl_write_byte(rtlpriv, REG_CR + 1, + (tmp_regcr | BIT(0))); + _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); + _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); + tmp_reg422 = rtl_read_byte(rtlpriv, + REG_FWHW_TXQ_CTRL + 2); + if (tmp_reg422 & BIT(6)) + recover = true; + rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, + tmp_reg422 & (~BIT(6))); + rtl92d_set_fw_rsvdpagepkt(hw, 0); + _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); + _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); + if (recover) + rtl_write_byte(rtlpriv, + REG_FWHW_TXQ_CTRL + 2, + tmp_reg422); + rtl_write_byte(rtlpriv, REG_CR + 1, + (tmp_regcr & ~(BIT(0)))); + } + rtl92d_set_fw_joinbss_report_cmd(hw, (*(u8 *) val)); + break; + } + case HW_VAR_AID: { + u16 u2btmp; + u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT); + u2btmp &= 0xC000; + rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp | + mac->assoc_id)); + break; + } + case HW_VAR_CORRECT_TSF: { + u8 btype_ibss = ((u8 *) (val))[0]; + + if (btype_ibss == true) + _rtl92de_stop_tx_beacon(hw); + _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(3)); + rtl_write_dword(rtlpriv, REG_TSFTR, + (u32) (mac->tsf & 0xffffffff)); + rtl_write_dword(rtlpriv, REG_TSFTR + 4, + (u32) ((mac->tsf >> 32) & 0xffffffff)); + _rtl92de_set_bcn_ctrl_reg(hw, BIT(3), 0); + if (btype_ibss == true) + _rtl92de_resume_tx_beacon(hw); + + break; + } + case HW_VAR_INT_MIGRATION: { + bool int_migration = *(bool *) (val); + + if (int_migration) { + /* Set interrrupt migration timer and + * corresponging Tx/Rx counter. + * timer 25ns*0xfa0=100us for 0xf packets. + * 0x306:Rx, 0x307:Tx */ + rtl_write_dword(rtlpriv, REG_INT_MIG, 0xfe000fa0); + rtlpriv->dm.interrupt_migration = int_migration; + } else { + /* Reset all interrupt migration settings. */ + rtl_write_dword(rtlpriv, REG_INT_MIG, 0); + rtlpriv->dm.interrupt_migration = int_migration; + } + break; + } + case HW_VAR_INT_AC: { + bool disable_ac_int = *((bool *) val); + + /* Disable four ACs interrupts. */ + if (disable_ac_int) { + /* Disable VO, VI, BE and BK four AC interrupts + * to gain more efficient CPU utilization. + * When extremely highly Rx OK occurs, + * we will disable Tx interrupts. + */ + rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, + RT_AC_INT_MASKS); + rtlpriv->dm.disable_tx_int = disable_ac_int; + /* Enable four ACs interrupts. */ + } else { + rtlpriv->cfg->ops->update_interrupt_mask(hw, + RT_AC_INT_MASKS, 0); + rtlpriv->dm.disable_tx_int = disable_ac_int; + } + break; + } + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("switch case not process\n")); + break; + } +} + +static bool _rtl92de_llt_write(struct ieee80211_hw *hw, u32 address, u32 data) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + bool status = true; + long count = 0; + u32 value = _LLT_INIT_ADDR(address) | + _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS); + + rtl_write_dword(rtlpriv, REG_LLT_INIT, value); + do { + value = rtl_read_dword(rtlpriv, REG_LLT_INIT); + if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)) + break; + if (count > POLLING_LLT_THRESHOLD) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Failed to polling write LLT done at " + "address %d!\n", address)); + status = false; + break; + } + } while (++count); + return status; +} + +static bool _rtl92de_llt_table_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + unsigned short i; + u8 txpktbuf_bndy; + u8 maxPage; + bool status; + u32 value32; /* High+low page number */ + u8 value8; /* normal page number */ + + if (rtlpriv->rtlhal.macphymode == SINGLEMAC_SINGLEPHY) { + maxPage = 255; + txpktbuf_bndy = 246; + value8 = 0; + value32 = 0x80bf0d29; + } else if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { + maxPage = 127; + txpktbuf_bndy = 123; + value8 = 0; + value32 = 0x80750005; + } + + /* Set reserved page for each queue */ + /* 11. RQPN 0x200[31:0] = 0x80BD1C1C */ + /* load RQPN */ + rtl_write_byte(rtlpriv, REG_RQPN_NPQ, value8); + rtl_write_dword(rtlpriv, REG_RQPN, value32); + + /* 12. TXRKTBUG_PG_BNDY 0x114[31:0] = 0x27FF00F6 */ + /* TXRKTBUG_PG_BNDY */ + rtl_write_dword(rtlpriv, REG_TRXFF_BNDY, + (rtl_read_word(rtlpriv, REG_TRXFF_BNDY + 2) << 16 | + txpktbuf_bndy)); + + /* 13. TDECTRL[15:8] 0x209[7:0] = 0xF6 */ + /* Beacon Head for TXDMA */ + rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy); + + /* 14. BCNQ_PGBNDY 0x424[7:0] = 0xF6 */ + /* BCNQ_PGBNDY */ + rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); + rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); + + /* 15. WMAC_LBK_BF_HD 0x45D[7:0] = 0xF6 */ + /* WMAC_LBK_BF_HD */ + rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy); + + /* Set Tx/Rx page size (Tx must be 128 Bytes, */ + /* Rx can be 64,128,256,512,1024 bytes) */ + /* 16. PBP [7:0] = 0x11 */ + /* TRX page size */ + rtl_write_byte(rtlpriv, REG_PBP, 0x11); + + /* 17. DRV_INFO_SZ = 0x04 */ + rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4); + + /* 18. LLT_table_init(Adapter); */ + for (i = 0; i < (txpktbuf_bndy - 1); i++) { + status = _rtl92de_llt_write(hw, i, i + 1); + if (true != status) + return status; + } + + /* end of list */ + status = _rtl92de_llt_write(hw, (txpktbuf_bndy - 1), 0xFF); + if (true != status) + return status; + + /* Make the other pages as ring buffer */ + /* This ring buffer is used as beacon buffer if we */ + /* config this MAC as two MAC transfer. */ + /* Otherwise used as local loopback buffer. */ + for (i = txpktbuf_bndy; i < maxPage; i++) { + status = _rtl92de_llt_write(hw, i, (i + 1)); + if (true != status) + return status; + } + + /* Let last entry point to the start entry of ring buffer */ + status = _rtl92de_llt_write(hw, maxPage, txpktbuf_bndy); + if (true != status) + return status; + + return true; +} + +static void _rtl92de_gen_refresh_led_state(struct ieee80211_hw *hw) +{ + struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0); + + if (rtlpci->up_first_time) + return; + if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) + rtl92ce_sw_led_on(hw, pLed0); + else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT) + rtl92ce_sw_led_on(hw, pLed0); + else + rtl92ce_sw_led_off(hw, pLed0); +} + +static bool _rtl92de_init_mac(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + unsigned char bytetmp; + unsigned short wordtmp; + u16 retry; + + rtl92d_phy_set_poweron(hw); + /* Add for resume sequence of power domain according + * to power document V11. Chapter V.11.... */ + /* 0. RSV_CTRL 0x1C[7:0] = 0x00 */ + /* unlock ISO/CLK/Power control register */ + rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00); + rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x05); + + /* 1. AFE_XTAL_CTRL [7:0] = 0x0F enable XTAL */ + /* 2. SPS0_CTRL 0x11[7:0] = 0x2b enable SPS into PWM mode */ + /* 3. delay (1ms) this is not necessary when initially power on */ + + /* C. Resume Sequence */ + /* a. SPS0_CTRL 0x11[7:0] = 0x2b */ + rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b); + + /* b. AFE_XTAL_CTRL [7:0] = 0x0F */ + rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F); + + /* c. DRV runs power on init flow */ + + /* auto enable WLAN */ + /* 4. APS_FSMCO 0x04[8] = 1; wait till 0x04[8] = 0 */ + /* Power On Reset for MAC Block */ + bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0); + udelay(2); + rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp); + udelay(2); + + /* 5. Wait while 0x04[8] == 0 goto 2, otherwise goto 1 */ + bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); + udelay(50); + retry = 0; + while ((bytetmp & BIT(0)) && retry < 1000) { + retry++; + bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1); + udelay(50); + } + + /* Enable Radio off, GPIO, and LED function */ + /* 6. APS_FSMCO 0x04[15:0] = 0x0012 when enable HWPDN */ + rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012); + + /* release RF digital isolation */ + /* 7. SYS_ISO_CTRL 0x01[1] = 0x0; */ + /*Set REG_SYS_ISO_CTRL 0x1=0x82 to prevent wake# problem. */ + rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82); + udelay(2); + + /* make sure that BB reset OK. */ + /* rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3); */ + + /* Disable REG_CR before enable it to assure reset */ + rtl_write_word(rtlpriv, REG_CR, 0x0); + + /* Release MAC IO register reset */ + rtl_write_word(rtlpriv, REG_CR, 0x2ff); + + /* clear stopping tx/rx dma */ + rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0x0); + + /* rtl_write_word(rtlpriv,REG_CR+2, 0x2); */ + + /* System init */ + /* 18. LLT_table_init(Adapter); */ + if (_rtl92de_llt_table_init(hw) == false) + return false; + + /* Clear interrupt and enable interrupt */ + /* 19. HISR 0x124[31:0] = 0xffffffff; */ + /* HISRE 0x12C[7:0] = 0xFF */ + rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff); + rtl_write_byte(rtlpriv, REG_HISRE, 0xff); + + /* 20. HIMR 0x120[31:0] |= [enable INT mask bit map]; */ + /* 21. HIMRE 0x128[7:0] = [enable INT mask bit map] */ + /* The IMR should be enabled later after all init sequence + * is finished. */ + + /* 22. PCIE configuration space configuration */ + /* 23. Ensure PCIe Device 0x80[15:0] = 0x0143 (ASPM+CLKREQ), */ + /* and PCIe gated clock function is enabled. */ + /* PCIE configuration space will be written after + * all init sequence.(Or by BIOS) */ + + rtl92d_phy_config_maccoexist_rfpage(hw); + + /* THe below section is not related to power document Vxx . */ + /* This is only useful for driver and OS setting. */ + /* -------------------Software Relative Setting---------------------- */ + wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL); + wordtmp &= 0xf; + wordtmp |= 0xF771; + rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp); + + /* Reported Tx status from HW for rate adaptive. */ + /* This should be realtive to power on step 14. But in document V11 */ + /* still not contain the description.!!! */ + rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F); + + /* Set Tx/Rx page size (Tx must be 128 Bytes, + * Rx can be 64,128,256,512,1024 bytes) */ + /* rtl_write_byte(rtlpriv,REG_PBP, 0x11); */ + + /* Set RCR register */ + rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config); + /* rtl_write_byte(rtlpriv,REG_RX_DRVINFO_SZ, 4); */ + + /* Set TCR register */ + rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config); + + /* disable earlymode */ + rtl_write_byte(rtlpriv, 0x4d0, 0x0); + + /* Set TX/RX descriptor physical address(from OS API). */ + rtl_write_dword(rtlpriv, REG_BCNQ_DESA, + rtlpci->tx_ring[BEACON_QUEUE].dma); + rtl_write_dword(rtlpriv, REG_MGQ_DESA, rtlpci->tx_ring[MGNT_QUEUE].dma); + rtl_write_dword(rtlpriv, REG_VOQ_DESA, rtlpci->tx_ring[VO_QUEUE].dma); + rtl_write_dword(rtlpriv, REG_VIQ_DESA, rtlpci->tx_ring[VI_QUEUE].dma); + rtl_write_dword(rtlpriv, REG_BEQ_DESA, rtlpci->tx_ring[BE_QUEUE].dma); + rtl_write_dword(rtlpriv, REG_BKQ_DESA, rtlpci->tx_ring[BK_QUEUE].dma); + rtl_write_dword(rtlpriv, REG_HQ_DESA, rtlpci->tx_ring[HIGH_QUEUE].dma); + /* Set RX Desc Address */ + rtl_write_dword(rtlpriv, REG_RX_DESA, + rtlpci->rx_ring[RX_MPDU_QUEUE].dma); + + /* if we want to support 64 bit DMA, we should set it here, + * but now we do not support 64 bit DMA*/ + + rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x33); + + /* Reset interrupt migration setting when initialization */ + rtl_write_dword(rtlpriv, REG_INT_MIG, 0); + + /* Reconsider when to do this operation after asking HWSD. */ + bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); + rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6)); + do { + retry++; + bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL); + } while ((retry < 200) && !(bytetmp & BIT(7))); + + /* After MACIO reset,we must refresh LED state. */ + _rtl92de_gen_refresh_led_state(hw); + + /* Reset H2C protection register */ + rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0); + + return true; +} + +static void _rtl92de_hw_configure(struct ieee80211_hw *hw) +{ + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u8 reg_bw_opmode = BW_OPMODE_20MHZ; + u32 reg_rrsr; + + reg_rrsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG; + rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8); + rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode); + rtl_write_dword(rtlpriv, REG_RRSR, reg_rrsr); + rtl_write_byte(rtlpriv, REG_SLOT, 0x09); + rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0); + rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80); + rtl_write_word(rtlpriv, REG_RL, 0x0707); + rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802); + rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF); + rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000); + rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504); + rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000); + rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504); + /* Aggregation threshold */ + if (rtlhal->macphymode == DUALMAC_DUALPHY) + rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb9726641); + else if (rtlhal->macphymode == DUALMAC_SINGLEPHY) + rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0x66626641); + else + rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841); + rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2); + rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0x0a); + rtlpci->reg_bcn_ctrl_val = 0x1f; + rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val); + rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff); + rtl_write_byte(rtlpriv, REG_PIFS, 0x1C); + rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16); + rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020); + /* For throughput */ + rtl_write_word(rtlpriv, REG_FAST_EDCA_CTRL, 0x6666); + /* ACKTO for IOT issue. */ + rtl_write_byte(rtlpriv, REG_ACKTO, 0x40); + /* Set Spec SIFS (used in NAV) */ + rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010); + rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010); + /* Set SIFS for CCK */ + rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010); + /* Set SIFS for OFDM */ + rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010); + /* Set Multicast Address. */ + rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff); + rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff); + switch (rtlpriv->phy.rf_type) { + case RF_1T2R: + case RF_1T1R: + rtlhal->minspace_cfg = (MAX_MSS_DENSITY_1T << 3); + break; + case RF_2T2R: + case RF_2T2R_GREEN: + rtlhal->minspace_cfg = (MAX_MSS_DENSITY_2T << 3); + break; + } +} + +static void _rtl92de_enable_aspm_back_door(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + + rtl_write_byte(rtlpriv, 0x34b, 0x93); + rtl_write_word(rtlpriv, 0x350, 0x870c); + rtl_write_byte(rtlpriv, 0x352, 0x1); + if (ppsc->support_backdoor) + rtl_write_byte(rtlpriv, 0x349, 0x1b); + else + rtl_write_byte(rtlpriv, 0x349, 0x03); + rtl_write_word(rtlpriv, 0x350, 0x2718); + rtl_write_byte(rtlpriv, 0x352, 0x1); +} + +void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 sec_reg_value; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n", + rtlpriv->sec.pairwise_enc_algorithm, + rtlpriv->sec.group_enc_algorithm)); + if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("not open hw encryption\n")); + return; + } + sec_reg_value = SCR_TXENCENABLE | SCR_RXENCENABLE; + if (rtlpriv->sec.use_defaultkey) { + sec_reg_value |= SCR_TXUSEDK; + sec_reg_value |= SCR_RXUSEDK; + } + sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK); + rtl_write_byte(rtlpriv, REG_CR + 1, 0x02); + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, + ("The SECR-value %x\n", sec_reg_value)); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value); +} + +int rtl92de_hw_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + bool rtstatus = true; + u8 tmp_u1b, i; + int err; + unsigned long flags; + + rtlpci->being_init_adapter = true; + rtlpci->init_ready = false; + spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); + /* we should do iqk after disable/enable */ + rtl92d_phy_reset_iqk_result(hw); + /* rtlpriv->intf_ops->disable_aspm(hw); */ + rtstatus = _rtl92de_init_mac(hw); + if (rtstatus != true) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Init MAC failed\n")); + err = 1; + spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); + return err; + } + err = rtl92d_download_fw(hw); + spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("Failed to download FW. Init HW " + "without FW..\n")); + err = 1; + rtlhal->fw_ready = false; + } else { + rtlhal->fw_ready = true; + } + rtlhal->last_hmeboxnum = 0; + rtlpriv->psc.fw_current_inpsmode = false; + + tmp_u1b = rtl_read_byte(rtlpriv, 0x605); + tmp_u1b = tmp_u1b | 0x30; + rtl_write_byte(rtlpriv, 0x605, tmp_u1b); + + if (rtlhal->earlymode_enable) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EarlyMode Enabled!!!\n")); + + tmp_u1b = rtl_read_byte(rtlpriv, 0x4d0); + tmp_u1b = tmp_u1b | 0x1f; + rtl_write_byte(rtlpriv, 0x4d0, tmp_u1b); + + rtl_write_byte(rtlpriv, 0x4d3, 0x80); + + tmp_u1b = rtl_read_byte(rtlpriv, 0x605); + tmp_u1b = tmp_u1b | 0x40; + rtl_write_byte(rtlpriv, 0x605, tmp_u1b); + } + + if (mac->rdg_en) { + rtl_write_byte(rtlpriv, REG_RD_CTRL, 0xff); + rtl_write_word(rtlpriv, REG_RD_NAV_NXT, 0x200); + rtl_write_byte(rtlpriv, REG_RD_RESP_PKT_TH, 0x05); + } + + rtl92d_phy_mac_config(hw); + /* because last function modify RCR, so we update + * rcr var here, or TP will unstable for receive_config + * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx + * RCR_APP_ICV will cause mac80211 unassoc for cisco 1252*/ + rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR); + rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV); + + rtl92d_phy_bb_config(hw); + + rtlphy->rf_mode = RF_OP_BY_SW_3WIRE; + /* set before initialize RF */ + rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); + + /* config RF */ + rtl92d_phy_rf_config(hw); + + /* After read predefined TXT, we must set BB/MAC/RF + * register as our requirement */ + /* After load BB,RF params,we need do more for 92D. */ + rtl92d_update_bbrf_configuration(hw); + /* set default value after initialize RF, */ + rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0); + rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0, + RF_CHNLBW, BRFREGOFFSETMASK); + rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1, + RF_CHNLBW, BRFREGOFFSETMASK); + + /*---- Set CCK and OFDM Block "ON"----*/ + if (rtlhal->current_bandtype == BAND_ON_2_4G) + rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1); + rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1); + if (rtlhal->interfaceindex == 0) { + /* RFPGA0_ANALOGPARAMETER2: cck clock select, + * set to 20MHz by default */ + rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10) | + BIT(11), 3); + } else { + /* Mac1 */ + rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(11) | + BIT(10), 3); + } + + _rtl92de_hw_configure(hw); + + /* reset hw sec */ + rtl_cam_reset_all_entry(hw); + rtl92de_enable_hw_security_config(hw); + + /* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */ + /* TX power index for different rate set. */ + rtl92d_phy_get_hw_reg_originalvalue(hw); + rtl92d_phy_set_txpower_level(hw, rtlphy->current_channel); + + ppsc->rfpwr_state = ERFON; + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr); + + _rtl92de_enable_aspm_back_door(hw); + /* rtlpriv->intf_ops->enable_aspm(hw); */ + + rtl92d_dm_init(hw); + rtlpci->being_init_adapter = false; + + if (ppsc->rfpwr_state == ERFON) { + rtl92d_phy_lc_calibrate(hw); + /* 5G and 2.4G must wait sometime to let RF LO ready */ + if (rtlhal->macphymode == DUALMAC_DUALPHY) { + u32 tmp_rega; + for (i = 0; i < 10000; i++) { + udelay(MAX_STALL_TIME); + + tmp_rega = rtl_get_rfreg(hw, + (enum radio_path)RF90_PATH_A, + 0x2a, BMASKDWORD); + + if (((tmp_rega & BIT(11)) == BIT(11))) + break; + } + } + } + rtlpci->init_ready = true; + return err; +} + +static enum version_8192d _rtl92de_read_chip_version(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + enum version_8192d version = VERSION_NORMAL_CHIP_92D_SINGLEPHY; + u32 value32; + + value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG); + if (!(value32 & 0x000f0000)) { + version = VERSION_TEST_CHIP_92D_SINGLEPHY; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("TEST CHIP!!!\n")); + } else { + version = VERSION_NORMAL_CHIP_92D_SINGLEPHY; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Normal CHIP!!!\n")); + } + return version; +} + +static int _rtl92de_set_media_status(struct ieee80211_hw *hw, + enum nl80211_iftype type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 bt_msr = rtl_read_byte(rtlpriv, MSR); + enum led_ctl_mode ledaction = LED_CTL_NO_LINK; + u8 bcnfunc_enable; + + bt_msr &= 0xfc; + + if (type == NL80211_IFTYPE_UNSPECIFIED || + type == NL80211_IFTYPE_STATION) { + _rtl92de_stop_tx_beacon(hw); + _rtl92de_enable_bcn_sub_func(hw); + } else if (type == NL80211_IFTYPE_ADHOC || + type == NL80211_IFTYPE_AP) { + _rtl92de_resume_tx_beacon(hw); + _rtl92de_disable_bcn_sub_func(hw); + } else { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("Set HW_VAR_MEDIA_STATUS: No such media " + "status(%x).\n", type)); + } + bcnfunc_enable = rtl_read_byte(rtlpriv, REG_BCN_CTRL); + switch (type) { + case NL80211_IFTYPE_UNSPECIFIED: + bt_msr |= MSR_NOLINK; + ledaction = LED_CTL_LINK; + bcnfunc_enable &= 0xF7; + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to NO LINK!\n")); + break; + case NL80211_IFTYPE_ADHOC: + bt_msr |= MSR_ADHOC; + bcnfunc_enable |= 0x08; + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to Ad Hoc!\n")); + break; + case NL80211_IFTYPE_STATION: + bt_msr |= MSR_INFRA; + ledaction = LED_CTL_LINK; + bcnfunc_enable &= 0xF7; + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to STA!\n")); + break; + case NL80211_IFTYPE_AP: + bt_msr |= MSR_AP; + bcnfunc_enable |= 0x08; + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + ("Set Network type to AP!\n")); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Network type %d not support!\n", type)); + return 1; + break; + + } + rtl_write_byte(rtlpriv, REG_CR + 2, bt_msr); + rtlpriv->cfg->ops->led_control(hw, ledaction); + if ((bt_msr & 0xfc) == MSR_AP) + rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00); + else + rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66); + return 0; +} + +void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + u32 reg_rcr = rtlpci->receive_config; + + if (rtlpriv->psc.rfpwr_state != ERFON) + return; + if (check_bssid == true) { + reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + _rtl92de_set_bcn_ctrl_reg(hw, 0, BIT(4)); + } else if (check_bssid == false) { + reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN)); + _rtl92de_set_bcn_ctrl_reg(hw, BIT(4), 0); + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *)(®_rcr)); + } +} + +int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (_rtl92de_set_media_status(hw, type)) + return -EOPNOTSUPP; + + /* check bssid */ + if (rtlpriv->mac80211.link_state == MAC80211_LINKED) { + if (type != NL80211_IFTYPE_AP) + rtl92de_set_check_bssid(hw, true); + } else { + rtl92de_set_check_bssid(hw, false); + } + return 0; +} + +/* do iqk or reload iqk */ +/* windows just rtl92d_phy_reload_iqk_setting in set channel, + * but it's very strict for time sequence so we add + * rtl92d_phy_reload_iqk_setting here */ +void rtl92d_linked_set_reg(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + u8 indexforchannel; + u8 channel = rtlphy->current_channel; + + indexforchannel = rtl92d_get_rightchnlplace_for_iqk(channel); + if (!rtlphy->iqk_matrix_regsetting[indexforchannel].iqk_done) { + RT_TRACE(rtlpriv, COMP_SCAN | COMP_INIT, DBG_DMESG, + ("Do IQK for channel:%d.\n", channel)); + rtl92d_phy_iq_calibrate(hw); + } +} + +/* don't set REG_EDCA_BE_PARAM here because + * mac80211 will send pkt when scan */ +void rtl92de_set_qos(struct ieee80211_hw *hw, int aci) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + rtl92d_dm_init_edca_turbo(hw); + return; + switch (aci) { + case AC1_BK: + rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f); + break; + case AC0_BE: + break; + case AC2_VI: + rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322); + break; + case AC3_VO: + rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222); + break; + default: + RT_ASSERT(false, ("invalid aci: %d !\n", aci)); + break; + } +} + +void rtl92de_enable_interrupt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF); + rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF); + rtlpci->irq_enabled = true; +} + +void rtl92de_disable_interrupt(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED); + rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED); + rtlpci->irq_enabled = false; + synchronize_irq(rtlpci->pdev->irq); +} + +static void _rtl92de_poweroff_adapter(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 u1b_tmp; + unsigned long flags; + + rtlpriv->intf_ops->enable_aspm(hw); + rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00); + rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(3), 0); + rtl_set_bbreg(hw, RFPGA0_XCD_RFPARAMETER, BIT(15), 0); + + /* 0x20:value 05-->04 */ + rtl_write_byte(rtlpriv, REG_LDOA15_CTRL, 0x04); + + /* ==== Reset digital sequence ====== */ + rtl92d_firmware_selfreset(hw); + + /* f. SYS_FUNC_EN 0x03[7:0]=0x51 reset MCU, MAC register, DCORE */ + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51); + + /* g. MCUFWDL 0x80[1:0]=0 reset MCU ready status */ + rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00); + + /* ==== Pull GPIO PIN to balance level and LED control ====== */ + + /* h. GPIO_PIN_CTRL 0x44[31:0]=0x000 */ + rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000); + + /* i. Value = GPIO_PIN_CTRL[7:0] */ + u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL); + + /* j. GPIO_PIN_CTRL 0x44[31:0] = 0x00FF0000 | (value <<8); */ + /* write external PIN level */ + rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, + 0x00FF0000 | (u1b_tmp << 8)); + + /* k. GPIO_MUXCFG 0x42 [15:0] = 0x0780 */ + rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790); + + /* l. LEDCFG 0x4C[15:0] = 0x8080 */ + rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080); + + /* ==== Disable analog sequence === */ + + /* m. AFE_PLL_CTRL[7:0] = 0x80 disable PLL */ + rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80); + + /* n. SPS0_CTRL 0x11[7:0] = 0x22 enter PFM mode */ + rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23); + + /* o. AFE_XTAL_CTRL 0x24[7:0] = 0x0E disable XTAL, if No BT COEX */ + rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e); + + /* p. RSV_CTRL 0x1C[7:0] = 0x0E lock ISO/CLK/Power control register */ + rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e); + + /* ==== interface into suspend === */ + + /* q. APS_FSMCO[15:8] = 0x58 PCIe suspend mode */ + /* According to power document V11, we need to set this */ + /* value as 0x18. Otherwise, we may not L0s sometimes. */ + /* This indluences power consumption. Bases on SD1's test, */ + /* set as 0x00 do not affect power current. And if it */ + /* is set as 0x18, they had ever met auto load fail problem. */ + rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10); + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("In PowerOff,reg0x%x=%X\n", REG_SPS0_CTRL, + rtl_read_byte(rtlpriv, REG_SPS0_CTRL))); + /* r. Note: for PCIe interface, PON will not turn */ + /* off m-bias and BandGap in PCIe suspend mode. */ + + /* 0x17[7] 1b': power off in process 0b' : power off over */ + if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) { + spin_lock_irqsave(&globalmutex_power, flags); + u1b_tmp = rtl_read_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS); + u1b_tmp &= (~BIT(7)); + rtl_write_byte(rtlpriv, REG_POWER_OFF_IN_PROCESS, u1b_tmp); + spin_unlock_irqrestore(&globalmutex_power, flags); + } + + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("<=======\n")); +} + +void rtl92de_card_disable(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + enum nl80211_iftype opmode; + + mac->link_state = MAC80211_NOLINK; + opmode = NL80211_IFTYPE_UNSPECIFIED; + _rtl92de_set_media_status(hw, opmode); + + if (rtlpci->driver_is_goingto_unload || + ppsc->rfoff_reason > RF_CHANGE_BY_PS) + rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF); + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + /* Power sequence for each MAC. */ + /* a. stop tx DMA */ + /* b. close RF */ + /* c. clear rx buf */ + /* d. stop rx DMA */ + /* e. reset MAC */ + + /* a. stop tx DMA */ + rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xFE); + udelay(50); + + /* b. TXPAUSE 0x522[7:0] = 0xFF Pause MAC TX queue */ + + /* c. ========RF OFF sequence========== */ + /* 0x88c[23:20] = 0xf. */ + rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER4, 0x00f00000, 0xf); + rtl_set_rfreg(hw, RF90_PATH_A, 0x00, BRFREGOFFSETMASK, 0x00); + + /* APSD_CTRL 0x600[7:0] = 0x40 */ + rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40); + + /* Close antenna 0,0xc04,0xd04 */ + rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, BMASKBYTE0, 0); + rtl_set_bbreg(hw, ROFDM1_TRXPATHENABLE, BDWORD, 0); + + /* SYS_FUNC_EN 0x02[7:0] = 0xE2 reset BB state machine */ + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2); + + /* Mac0 can not do Global reset. Mac1 can do. */ + /* SYS_FUNC_EN 0x02[7:0] = 0xE0 reset BB state machine */ + if (rtlpriv->rtlhal.interfaceindex == 1) + rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0); + udelay(50); + + /* d. stop tx/rx dma before disable REG_CR (0x100) to fix */ + /* dma hang issue when disable/enable device. */ + rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 1, 0xff); + udelay(50); + rtl_write_byte(rtlpriv, REG_CR, 0x0); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("==> Do power off.......\n")); + if (rtl92d_phy_check_poweroff(hw)) + _rtl92de_poweroff_adapter(hw); + return; +} + +void rtl92de_interrupt_recognized(struct ieee80211_hw *hw, + u32 *p_inta, u32 *p_intb) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + *p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0]; + rtl_write_dword(rtlpriv, ISR, *p_inta); + + /* + * *p_intb = rtl_read_dword(rtlpriv, REG_HISRE) & rtlpci->irq_mask[1]; + * rtl_write_dword(rtlpriv, ISR + 4, *p_intb); + */ +} + +void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 bcn_interval, atim_window; + + bcn_interval = mac->beacon_interval; + atim_window = 2; + /*rtl92de_disable_interrupt(hw); */ + rtl_write_word(rtlpriv, REG_ATIMWND, atim_window); + rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); + rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f); + rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x20); + if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G) + rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x30); + else + rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x20); + rtl_write_byte(rtlpriv, 0x606, 0x30); +} + +void rtl92de_set_beacon_interval(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 bcn_interval = mac->beacon_interval; + + RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG, + ("beacon_interval:%d\n", bcn_interval)); + /* rtl92de_disable_interrupt(hw); */ + rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval); + /* rtl92de_enable_interrupt(hw); */ +} + +void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw, + u32 add_msr, u32 rm_msr) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, + ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr)); + if (add_msr) + rtlpci->irq_mask[0] |= add_msr; + if (rm_msr) + rtlpci->irq_mask[0] &= (~rm_msr); + rtl92de_disable_interrupt(hw); + rtl92de_enable_interrupt(hw); +} + +static void _rtl92de_readpowervalue_fromprom(struct txpower_info *pwrinfo, + u8 *rom_content, bool autoLoadfail) +{ + u32 rfpath, eeaddr, group, offset1, offset2; + u8 i; + + memset(pwrinfo, 0, sizeof(struct txpower_info)); + if (autoLoadfail) { + for (group = 0; group < CHANNEL_GROUP_MAX; group++) { + for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { + if (group < CHANNEL_GROUP_MAX_2G) { + pwrinfo->cck_index[rfpath][group] = + EEPROM_DEFAULT_TXPOWERLEVEL_2G; + pwrinfo->ht40_1sindex[rfpath][group] = + EEPROM_DEFAULT_TXPOWERLEVEL_2G; + } else { + pwrinfo->ht40_1sindex[rfpath][group] = + EEPROM_DEFAULT_TXPOWERLEVEL_5G; + } + pwrinfo->ht40_2sindexdiff[rfpath][group] = + EEPROM_DEFAULT_HT40_2SDIFF; + pwrinfo->ht20indexdiff[rfpath][group] = + EEPROM_DEFAULT_HT20_DIFF; + pwrinfo->ofdmindexdiff[rfpath][group] = + EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; + pwrinfo->ht40maxoffset[rfpath][group] = + EEPROM_DEFAULT_HT40_PWRMAXOFFSET; + pwrinfo->ht20maxoffset[rfpath][group] = + EEPROM_DEFAULT_HT20_PWRMAXOFFSET; + } + } + for (i = 0; i < 3; i++) { + pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI; + pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI; + } + return; + } + + /* Maybe autoload OK,buf the tx power index value is not filled. + * If we find it, we set it to default value. */ + for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { + for (group = 0; group < CHANNEL_GROUP_MAX_2G; group++) { + eeaddr = EEPROM_CCK_TX_PWR_INX_2G + (rfpath * 3) + + group; + pwrinfo->cck_index[rfpath][group] = + (rom_content[eeaddr] == 0xFF) ? + (eeaddr > 0x7B ? + EEPROM_DEFAULT_TXPOWERLEVEL_5G : + EEPROM_DEFAULT_TXPOWERLEVEL_2G) : + rom_content[eeaddr]; + } + } + for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { + for (group = 0; group < CHANNEL_GROUP_MAX; group++) { + offset1 = group / 3; + offset2 = group % 3; + eeaddr = EEPROM_HT40_1S_TX_PWR_INX_2G + (rfpath * 3) + + offset2 + offset1 * 21; + pwrinfo->ht40_1sindex[rfpath][group] = + (rom_content[eeaddr] == 0xFF) ? (eeaddr > 0x7B ? + EEPROM_DEFAULT_TXPOWERLEVEL_5G : + EEPROM_DEFAULT_TXPOWERLEVEL_2G) : + rom_content[eeaddr]; + } + } + /* These just for 92D efuse offset. */ + for (group = 0; group < CHANNEL_GROUP_MAX; group++) { + for (rfpath = 0; rfpath < RF6052_MAX_PATH; rfpath++) { + int base1 = EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G; + + offset1 = group / 3; + offset2 = group % 3; + + if (rom_content[base1 + offset2 + offset1 * 21] != 0xFF) + pwrinfo->ht40_2sindexdiff[rfpath][group] = + (rom_content[base1 + + offset2 + offset1 * 21] >> (rfpath * 4)) + & 0xF; + else + pwrinfo->ht40_2sindexdiff[rfpath][group] = + EEPROM_DEFAULT_HT40_2SDIFF; + if (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + offset2 + + offset1 * 21] != 0xFF) + pwrinfo->ht20indexdiff[rfpath][group] = + (rom_content[EEPROM_HT20_TX_PWR_INX_DIFF_2G + + offset2 + offset1 * 21] >> (rfpath * 4)) + & 0xF; + else + pwrinfo->ht20indexdiff[rfpath][group] = + EEPROM_DEFAULT_HT20_DIFF; + if (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + offset2 + + offset1 * 21] != 0xFF) + pwrinfo->ofdmindexdiff[rfpath][group] = + (rom_content[EEPROM_OFDM_TX_PWR_INX_DIFF_2G + + offset2 + offset1 * 21] >> (rfpath * 4)) + & 0xF; + else + pwrinfo->ofdmindexdiff[rfpath][group] = + EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF; + if (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + offset2 + + offset1 * 21] != 0xFF) + pwrinfo->ht40maxoffset[rfpath][group] = + (rom_content[EEPROM_HT40_MAX_PWR_OFFSET_2G + + offset2 + offset1 * 21] >> (rfpath * 4)) + & 0xF; + else + pwrinfo->ht40maxoffset[rfpath][group] = + EEPROM_DEFAULT_HT40_PWRMAXOFFSET; + if (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + offset2 + + offset1 * 21] != 0xFF) + pwrinfo->ht20maxoffset[rfpath][group] = + (rom_content[EEPROM_HT20_MAX_PWR_OFFSET_2G + + offset2 + offset1 * 21] >> (rfpath * 4)) & + 0xF; + else + pwrinfo->ht20maxoffset[rfpath][group] = + EEPROM_DEFAULT_HT20_PWRMAXOFFSET; + } + } + if (rom_content[EEPROM_TSSI_A_5G] != 0xFF) { + /* 5GL */ + pwrinfo->tssi_a[0] = rom_content[EEPROM_TSSI_A_5G] & 0x3F; + pwrinfo->tssi_b[0] = rom_content[EEPROM_TSSI_B_5G] & 0x3F; + /* 5GM */ + pwrinfo->tssi_a[1] = rom_content[EEPROM_TSSI_AB_5G] & 0x3F; + pwrinfo->tssi_b[1] = + (rom_content[EEPROM_TSSI_AB_5G] & 0xC0) >> 6 | + (rom_content[EEPROM_TSSI_AB_5G + 1] & 0x0F) << 2; + /* 5GH */ + pwrinfo->tssi_a[2] = (rom_content[EEPROM_TSSI_AB_5G + 1] & + 0xF0) >> 4 | + (rom_content[EEPROM_TSSI_AB_5G + 2] & 0x03) << 4; + pwrinfo->tssi_b[2] = (rom_content[EEPROM_TSSI_AB_5G + 2] & + 0xFC) >> 2; + } else { + for (i = 0; i < 3; i++) { + pwrinfo->tssi_a[i] = EEPROM_DEFAULT_TSSI; + pwrinfo->tssi_b[i] = EEPROM_DEFAULT_TSSI; + } + } +} + +static void _rtl92de_read_txpower_info(struct ieee80211_hw *hw, + bool autoload_fail, u8 *hwinfo) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct txpower_info pwrinfo; + u8 tempval[2], i, pwr, diff; + u32 ch, rfPath, group; + + _rtl92de_readpowervalue_fromprom(&pwrinfo, hwinfo, autoload_fail); + if (!autoload_fail) { + /* bit0~2 */ + rtlefuse->eeprom_regulatory = (hwinfo[EEPROM_RF_OPT1] & 0x7); + rtlefuse->eeprom_thermalmeter = + hwinfo[EEPROM_THERMAL_METER] & 0x1f; + rtlefuse->crystalcap = hwinfo[EEPROM_XTAL_K]; + tempval[0] = hwinfo[EEPROM_IQK_DELTA] & 0x03; + tempval[1] = (hwinfo[EEPROM_LCK_DELTA] & 0x0C) >> 2; + rtlefuse->txpwr_fromeprom = true; + if (IS_92D_D_CUT(rtlpriv->rtlhal.version)) { + rtlefuse->internal_pa_5g[0] = + !((hwinfo[EEPROM_TSSI_A_5G] & + BIT(6)) >> 6); + rtlefuse->internal_pa_5g[1] = + !((hwinfo[EEPROM_TSSI_B_5G] & + BIT(6)) >> 6); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("Is D cut,Internal PA0 %d Internal PA1 %d\n", + rtlefuse->internal_pa_5g[0], + rtlefuse->internal_pa_5g[1])) + } + rtlefuse->eeprom_c9 = hwinfo[EEPROM_RF_OPT6]; + rtlefuse->eeprom_cc = hwinfo[EEPROM_RF_OPT7]; + } else { + rtlefuse->eeprom_regulatory = 0; + rtlefuse->eeprom_thermalmeter = EEPROM_DEFAULT_THERMALMETER; + rtlefuse->crystalcap = EEPROM_DEFAULT_CRYSTALCAP; + tempval[0] = tempval[1] = 3; + } + + /* Use default value to fill parameters if + * efuse is not filled on some place. */ + + /* ThermalMeter from EEPROM */ + if (rtlefuse->eeprom_thermalmeter < 0x06 || + rtlefuse->eeprom_thermalmeter > 0x1c) + rtlefuse->eeprom_thermalmeter = 0x12; + rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter; + + /* check XTAL_K */ + if (rtlefuse->crystalcap == 0xFF) + rtlefuse->crystalcap = 0; + if (rtlefuse->eeprom_regulatory > 3) + rtlefuse->eeprom_regulatory = 0; + + for (i = 0; i < 2; i++) { + switch (tempval[i]) { + case 0: + tempval[i] = 5; + break; + case 1: + tempval[i] = 4; + break; + case 2: + tempval[i] = 3; + break; + case 3: + default: + tempval[i] = 0; + break; + } + } + + rtlefuse->delta_iqk = tempval[0]; + if (tempval[1] > 0) + rtlefuse->delta_lck = tempval[1] - 1; + if (rtlefuse->eeprom_c9 == 0xFF) + rtlefuse->eeprom_c9 = 0x00; + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, + ("EEPROMRegulatory = 0x%x\n", rtlefuse->eeprom_regulatory)); + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, + ("ThermalMeter = 0x%x\n", rtlefuse->eeprom_thermalmeter)); + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, + ("CrystalCap = 0x%x\n", rtlefuse->crystalcap)); + RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD, + ("Delta_IQK = 0x%x Delta_LCK = 0x%x\n", rtlefuse->delta_iqk, + rtlefuse->delta_lck)); + + for (rfPath = 0; rfPath < RF6052_MAX_PATH; rfPath++) { + for (ch = 0; ch < CHANNEL_MAX_NUMBER; ch++) { + group = rtl92d_get_chnlgroup_fromarray((u8) ch); + if (ch < CHANNEL_MAX_NUMBER_2G) + rtlefuse->txpwrlevel_cck[rfPath][ch] = + pwrinfo.cck_index[rfPath][group]; + rtlefuse->txpwrlevel_ht40_1s[rfPath][ch] = + pwrinfo.ht40_1sindex[rfPath][group]; + rtlefuse->txpwr_ht20diff[rfPath][ch] = + pwrinfo.ht20indexdiff[rfPath][group]; + rtlefuse->txpwr_legacyhtdiff[rfPath][ch] = + pwrinfo.ofdmindexdiff[rfPath][group]; + rtlefuse->pwrgroup_ht20[rfPath][ch] = + pwrinfo.ht20maxoffset[rfPath][group]; + rtlefuse->pwrgroup_ht40[rfPath][ch] = + pwrinfo.ht40maxoffset[rfPath][group]; + pwr = pwrinfo.ht40_1sindex[rfPath][group]; + diff = pwrinfo.ht40_2sindexdiff[rfPath][group]; + rtlefuse->txpwrlevel_ht40_2s[rfPath][ch] = + (pwr > diff) ? (pwr - diff) : 0; + } + } +} + +static void _rtl92de_read_macphymode_from_prom(struct ieee80211_hw *hw, + u8 *content) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u8 macphy_crvalue = content[EEPROM_MAC_FUNCTION]; + + if (macphy_crvalue & BIT(3)) { + rtlhal->macphymode = SINGLEMAC_SINGLEPHY; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("MacPhyMode SINGLEMAC_SINGLEPHY\n")); + } else { + rtlhal->macphymode = DUALMAC_DUALPHY; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("MacPhyMode DUALMAC_DUALPHY\n")); + } +} + +static void _rtl92de_read_macphymode_and_bandtype(struct ieee80211_hw *hw, + u8 *content) +{ + _rtl92de_read_macphymode_from_prom(hw, content); + rtl92d_phy_config_macphymode(hw); + rtl92d_phy_config_macphymode_info(hw); +} + +static void _rtl92de_efuse_update_chip_version(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + enum version_8192d chipver = rtlpriv->rtlhal.version; + u8 cutvalue[2]; + u16 chipvalue; + + rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_H, + &cutvalue[1]); + rtlpriv->intf_ops->read_efuse_byte(hw, EEPROME_CHIP_VERSION_L, + &cutvalue[0]); + chipvalue = (cutvalue[1] << 8) | cutvalue[0]; + switch (chipvalue) { + case 0xAA55: + chipver |= CHIP_92D_C_CUT; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("C-CUT!!!\n")); + break; + case 0x9966: + chipver |= CHIP_92D_D_CUT; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("D-CUT!!!\n")); + break; + default: + chipver |= CHIP_92D_D_CUT; + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, ("Unkown CUT!\n")); + break; + } + rtlpriv->rtlhal.version = chipver; +} + +static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u16 i, usvalue; + u8 hwinfo[HWSET_MAX_SIZE]; + u16 eeprom_id; + unsigned long flags; + + if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) { + spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags); + rtl_efuse_shadow_map_update(hw); + _rtl92de_efuse_update_chip_version(hw); + spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags); + memcpy((void *)hwinfo, (void *)&rtlefuse->efuse_map + [EFUSE_INIT_MAP][0], + HWSET_MAX_SIZE); + } else if (rtlefuse->epromtype == EEPROM_93C46) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("RTL819X Not boot from eeprom, check it !!")); + } + RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, ("MAP\n"), + hwinfo, HWSET_MAX_SIZE); + + eeprom_id = *((u16 *)&hwinfo[0]); + if (eeprom_id != RTL8190_EEPROM_ID) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, + ("EEPROM ID(%#x) is invalid!!\n", eeprom_id)); + rtlefuse->autoload_failflag = true; + } else { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n")); + rtlefuse->autoload_failflag = false; + } + if (rtlefuse->autoload_failflag == true) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("RTL819X Not boot from eeprom, check it !!")); + return; + } + rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID]; + _rtl92de_read_macphymode_and_bandtype(hw, hwinfo); + + /* VID, DID SE 0xA-D */ + rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID]; + rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID]; + rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID]; + rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID]; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROMId = 0x%4x\n", eeprom_id)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid)); + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid)); + + /* Read Permanent MAC address */ + if (rtlhal->interfaceindex == 0) { + for (i = 0; i < 6; i += 2) { + usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i]; + *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; + } + } else { + for (i = 0; i < 6; i += 2) { + usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i]; + *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue; + } + } + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, + rtlefuse->dev_addr); + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, + (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr))); + _rtl92de_read_txpower_info(hw, rtlefuse->autoload_failflag, hwinfo); + + /* Read Channel Plan */ + switch (rtlhal->bandset) { + case BAND_ON_2_4G: + rtlefuse->channel_plan = COUNTRY_CODE_TELEC; + break; + case BAND_ON_5G: + rtlefuse->channel_plan = COUNTRY_CODE_FCC; + break; + case BAND_ON_BOTH: + rtlefuse->channel_plan = COUNTRY_CODE_FCC; + break; + default: + rtlefuse->channel_plan = COUNTRY_CODE_FCC; + break; + } + rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION]; + rtlefuse->txpwr_fromeprom = true; + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, + ("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid)); +} + +void rtl92de_read_eeprom_info(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u8 tmp_u1b; + + rtlhal->version = _rtl92de_read_chip_version(hw); + tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR); + rtlefuse->autoload_status = tmp_u1b; + if (tmp_u1b & BIT(4)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n")); + rtlefuse->epromtype = EEPROM_93C46; + } else { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n")); + rtlefuse->epromtype = EEPROM_BOOT_EFUSE; + } + if (tmp_u1b & BIT(5)) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n")); + + rtlefuse->autoload_failflag = false; + _rtl92de_read_adapter_info(hw); + } else { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n")); + } + return; +} + +static void rtl92de_update_hal_rate_table(struct ieee80211_hw *hw, + struct ieee80211_sta *sta) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + u32 ratr_value; + u8 ratr_index = 0; + u8 nmode = mac->ht_enable; + u8 mimo_ps = IEEE80211_SMPS_OFF; + u16 shortgi_rate; + u32 tmp_ratr_value; + u8 curtxbw_40mhz = mac->bw_40; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = mac->mode; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_value = sta->supp_rates[1] << 4; + else + ratr_value = sta->supp_rates[0]; + ratr_value |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); + switch (wirelessmode) { + case WIRELESS_MODE_A: + ratr_value &= 0x00000FF0; + break; + case WIRELESS_MODE_B: + if (ratr_value & 0x0000000c) + ratr_value &= 0x0000000d; + else + ratr_value &= 0x0000000f; + break; + case WIRELESS_MODE_G: + ratr_value &= 0x00000FF5; + break; + case WIRELESS_MODE_N_24G: + case WIRELESS_MODE_N_5G: + nmode = 1; + if (mimo_ps == IEEE80211_SMPS_STATIC) { + ratr_value &= 0x0007F005; + } else { + u32 ratr_mask; + + if (get_rf_type(rtlphy) == RF_1T2R || + get_rf_type(rtlphy) == RF_1T1R) { + ratr_mask = 0x000ff005; + } else { + ratr_mask = 0x0f0ff005; + } + + ratr_value &= ratr_mask; + } + break; + default: + if (rtlphy->rf_type == RF_1T2R) + ratr_value &= 0x000ff0ff; + else + ratr_value &= 0x0f0ff0ff; + + break; + } + ratr_value &= 0x0FFFFFFF; + if (nmode && ((curtxbw_40mhz && curshortgi_40mhz) || + (!curtxbw_40mhz && curshortgi_20mhz))) { + ratr_value |= 0x10000000; + tmp_ratr_value = (ratr_value >> 12); + for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) { + if ((1 << shortgi_rate) & tmp_ratr_value) + break; + } + shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) | + (shortgi_rate << 4) | (shortgi_rate); + } + rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value); + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, + ("%x\n", rtl_read_dword(rtlpriv, REG_ARFR0))); +} + +static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_phy *rtlphy = &(rtlpriv->phy); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_sta_info *sta_entry = NULL; + u32 ratr_bitmap; + u8 ratr_index; + u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) + ? 1 : 0; + u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + 1 : 0; + u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? + 1 : 0; + enum wireless_mode wirelessmode = 0; + bool shortgi = false; + u32 value[2]; + u8 macid = 0; + u8 mimo_ps = IEEE80211_SMPS_OFF; + + sta_entry = (struct rtl_sta_info *) sta->drv_priv; + mimo_ps = sta_entry->mimo_ps; + wirelessmode = sta_entry->wireless_mode; + if (mac->opmode == NL80211_IFTYPE_STATION) + curtxbw_40mhz = mac->bw_40; + else if (mac->opmode == NL80211_IFTYPE_AP || + mac->opmode == NL80211_IFTYPE_ADHOC) + macid = sta->aid + 1; + + if (rtlhal->current_bandtype == BAND_ON_5G) + ratr_bitmap = sta->supp_rates[1] << 4; + else + ratr_bitmap = sta->supp_rates[0]; + ratr_bitmap |= (sta->ht_cap.mcs.rx_mask[1] << 20 | + sta->ht_cap.mcs.rx_mask[0] << 12); + switch (wirelessmode) { + case WIRELESS_MODE_B: + ratr_index = RATR_INX_WIRELESS_B; + if (ratr_bitmap & 0x0000000c) + ratr_bitmap &= 0x0000000d; + else + ratr_bitmap &= 0x0000000f; + break; + case WIRELESS_MODE_G: + ratr_index = RATR_INX_WIRELESS_GB; + + if (rssi_level == 1) + ratr_bitmap &= 0x00000f00; + else if (rssi_level == 2) + ratr_bitmap &= 0x00000ff0; + else + ratr_bitmap &= 0x00000ff5; + break; + case WIRELESS_MODE_A: + ratr_index = RATR_INX_WIRELESS_G; + ratr_bitmap &= 0x00000ff0; + break; + case WIRELESS_MODE_N_24G: + case WIRELESS_MODE_N_5G: + if (wirelessmode == WIRELESS_MODE_N_24G) + ratr_index = RATR_INX_WIRELESS_NGB; + else + ratr_index = RATR_INX_WIRELESS_NG; + if (mimo_ps == IEEE80211_SMPS_STATIC) { + if (rssi_level == 1) + ratr_bitmap &= 0x00070000; + else if (rssi_level == 2) + ratr_bitmap &= 0x0007f000; + else + ratr_bitmap &= 0x0007f005; + } else { + if (rtlphy->rf_type == RF_1T2R || + rtlphy->rf_type == RF_1T1R) { + if (curtxbw_40mhz) { + if (rssi_level == 1) + ratr_bitmap &= 0x000f0000; + else if (rssi_level == 2) + ratr_bitmap &= 0x000ff000; + else + ratr_bitmap &= 0x000ff015; + } else { + if (rssi_level == 1) + ratr_bitmap &= 0x000f0000; + else if (rssi_level == 2) + ratr_bitmap &= 0x000ff000; + else + ratr_bitmap &= 0x000ff005; + } + } else { + if (curtxbw_40mhz) { + if (rssi_level == 1) + ratr_bitmap &= 0x0f0f0000; + else if (rssi_level == 2) + ratr_bitmap &= 0x0f0ff000; + else + ratr_bitmap &= 0x0f0ff015; + } else { + if (rssi_level == 1) + ratr_bitmap &= 0x0f0f0000; + else if (rssi_level == 2) + ratr_bitmap &= 0x0f0ff000; + else + ratr_bitmap &= 0x0f0ff005; + } + } + } + if ((curtxbw_40mhz && curshortgi_40mhz) || + (!curtxbw_40mhz && curshortgi_20mhz)) { + + if (macid == 0) + shortgi = true; + else if (macid == 1) + shortgi = false; + } + break; + default: + ratr_index = RATR_INX_WIRELESS_NGB; + + if (rtlphy->rf_type == RF_1T2R) + ratr_bitmap &= 0x000ff0ff; + else + ratr_bitmap &= 0x0f0ff0ff; + break; + } + + value[0] = (ratr_bitmap & 0x0fffffff) | (ratr_index << 28); + value[1] = macid | (shortgi ? 0x20 : 0x00) | 0x80; + RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, + ("ratr_bitmap :%x value0:%x value1:%x\n", + ratr_bitmap, value[0], value[1])); + rtl92d_fill_h2c_cmd(hw, H2C_RA_MASK, 5, (u8 *) value); + if (macid != 0) + sta_entry->ratr_index = ratr_index; +} + +void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u8 rssi_level) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + if (rtlpriv->dm.useramask) + rtl92de_update_hal_rate_mask(hw, sta, rssi_level); + else + rtl92de_update_hal_rate_table(hw, sta); +} + +void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + u16 sifs_timer; + + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME, + (u8 *)&mac->slot_time); + if (!mac->ht_enable) + sifs_timer = 0x0a0a; + else + sifs_timer = 0x1010; + rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer); +} + +bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); + enum rf_pwrstate e_rfpowerstate_toset; + u8 u1tmp; + bool actuallyset = false; + unsigned long flag; + + if (rtlpci->being_init_adapter) + return false; + if (ppsc->swrf_processing) + return false; + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + if (ppsc->rfchange_inprogress) { + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + return false; + } else { + ppsc->rfchange_inprogress = true; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } + rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv, + REG_MAC_PINMUX_CFG) & ~(BIT(3))); + u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL); + e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF; + if ((ppsc->hwradiooff == true) && (e_rfpowerstate_toset == ERFON)) { + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + ("GPIOChangeRF - HW Radio ON, RF ON\n")); + e_rfpowerstate_toset = ERFON; + ppsc->hwradiooff = false; + actuallyset = true; + } else if ((ppsc->hwradiooff == false) + && (e_rfpowerstate_toset == ERFOFF)) { + RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, + ("GPIOChangeRF - HW Radio OFF, RF OFF\n")); + e_rfpowerstate_toset = ERFOFF; + ppsc->hwradiooff = true; + actuallyset = true; + } + if (actuallyset) { + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + ppsc->rfchange_inprogress = false; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } else { + if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) + RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC); + spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag); + ppsc->rfchange_inprogress = false; + spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag); + } + *valid = 1; + return !ppsc->hwradiooff; +} + +void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index, + u8 *p_macaddr, bool is_group, u8 enc_algo, + bool is_wepkey, bool clear_all) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw)); + u8 *macaddr = p_macaddr; + u32 entry_id; + bool is_pairwise = false; + static u8 cam_const_addr[4][6] = { + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x01}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x02}, + {0x00, 0x00, 0x00, 0x00, 0x00, 0x03} + }; + static u8 cam_const_broad[] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff + }; + + if (clear_all) { + u8 idx; + u8 cam_offset = 0; + u8 clear_number = 5; + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n")); + for (idx = 0; idx < clear_number; idx++) { + rtl_cam_mark_invalid(hw, cam_offset + idx); + rtl_cam_empty_entry(hw, cam_offset + idx); + + if (idx < 5) { + memset(rtlpriv->sec.key_buf[idx], 0, + MAX_KEY_LEN); + rtlpriv->sec.key_len[idx] = 0; + } + } + } else { + switch (enc_algo) { + case WEP40_ENCRYPTION: + enc_algo = CAM_WEP40; + break; + case WEP104_ENCRYPTION: + enc_algo = CAM_WEP104; + break; + case TKIP_ENCRYPTION: + enc_algo = CAM_TKIP; + break; + case AESCCMP_ENCRYPTION: + enc_algo = CAM_AES; + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case " + "not process\n")); + enc_algo = CAM_TKIP; + break; + } + if (is_wepkey || rtlpriv->sec.use_defaultkey) { + macaddr = cam_const_addr[key_index]; + entry_id = key_index; + } else { + if (is_group) { + macaddr = cam_const_broad; + entry_id = key_index; + } else { + if (mac->opmode == NL80211_IFTYPE_AP) { + entry_id = rtl_cam_get_free_entry(hw, + p_macaddr); + if (entry_id >= TOTAL_CAM_ENTRY) { + RT_TRACE(rtlpriv, COMP_SEC, + DBG_EMERG, ("Can not " + "find free hw security" + " cam entry\n")); + return; + } + } else { + entry_id = CAM_PAIRWISE_KEY_POSITION; + } + key_index = PAIRWISE_KEYIDX; + is_pairwise = true; + } + } + if (rtlpriv->sec.key_len[key_index] == 0) { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("delete one entry, entry_id is %d\n", + entry_id)); + if (mac->opmode == NL80211_IFTYPE_AP) + rtl_cam_del_entry(hw, p_macaddr); + rtl_cam_delete_one_entry(hw, p_macaddr, entry_id); + } else { + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, + ("The insert KEY length is %d\n", + rtlpriv->sec.key_len[PAIRWISE_KEYIDX])); + RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, + ("The insert KEY is %x %x\n", + rtlpriv->sec.key_buf[0][0], + rtlpriv->sec.key_buf[0][1])); + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("add one entry\n")); + if (is_pairwise) { + RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD, + "Pairwiase Key content :", + rtlpriv->sec.pairwise_key, + rtlpriv-> + sec.key_len[PAIRWISE_KEYIDX]); + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("set Pairwiase key\n")); + rtl_cam_add_one_entry(hw, macaddr, key_index, + entry_id, enc_algo, + CAM_CONFIG_NO_USEDK, + rtlpriv-> + sec.key_buf[key_index]); + } else { + RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, + ("set group key\n")); + if (mac->opmode == NL80211_IFTYPE_ADHOC) { + rtl_cam_add_one_entry(hw, + rtlefuse->dev_addr, + PAIRWISE_KEYIDX, + CAM_PAIRWISE_KEY_POSITION, + enc_algo, CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf[entry_id]); + } + rtl_cam_add_one_entry(hw, macaddr, key_index, + entry_id, enc_algo, + CAM_CONFIG_NO_USEDK, + rtlpriv->sec.key_buf + [entry_id]); + } + } + } +} + +void rtl92de_suspend(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->rtlhal.macphyctl_reg = rtl_read_byte(rtlpriv, + REG_MAC_PHY_CTRL_NORMAL); +} + +void rtl92de_resume(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtl_write_byte(rtlpriv, REG_MAC_PHY_CTRL_NORMAL, + rtlpriv->rtlhal.macphyctl_reg); +} diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.h b/drivers/net/wireless/rtlwifi/rtl8192de/hw.h new file mode 100644 index 00000000000..ad44ffa520e --- /dev/null +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.h @@ -0,0 +1,66 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2010 Realtek Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae <wlanfae@realtek.com> + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + * Larry Finger <Larry.Finger@lwfinger.net> + * + *****************************************************************************/ + +#ifndef __RTL92DE_HW_H__ +#define __RTL92DE_HW_H__ + +void rtl92de_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); +void rtl92de_read_eeprom_info(struct ieee80211_hw *hw); +void rtl92de_interrupt_recognized(struct ieee80211_hw *hw, + u32 *p_inta, u32 *p_intb); +int rtl92de_hw_init(struct ieee80211_hw *hw); +void rtl92de_card_disable(struct ieee80211_hw *hw); +void rtl92de_enable_interrupt(struct ieee80211_hw *hw); +void rtl92de_disable_interrupt(struct ieee80211_hw *hw); +int rtl92de_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type); +void rtl92de_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid); +void rtl92de_set_qos(struct ieee80211_hw *hw, int aci); +void rtl92de_set_beacon_related_registers(struct ieee80211_hw *hw); +void rtl92de_set_beacon_interval(struct ieee80211_hw *hw); +void rtl92de_update_interrupt_mask(struct ieee80211_hw *hw, + u32 add_msr, u32 rm_msr); +void rtl92de_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val); +void rtl92de_update_hal_rate_tbl(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, u8 rssi_level); +void rtl92de_update_channel_access_setting(struct ieee80211_hw *hw); +bool rtl92de_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid); +void rtl92de_enable_hw_security_config(struct ieee80211_hw *hw); +void rtl92de_set_key(struct ieee80211_hw *hw, u32 key_index, + u8 *p_macaddr, bool is_group, u8 enc_algo, + bool is_wepkey, bool clear_all); + +extern void rtl92de_write_dword_dbi(struct ieee80211_hw *hw, u16 offset, + u32 value, u8 direct); +extern u32 rtl92de_read_dword_dbi(struct ieee80211_hw *hw, u16 offset, + u8 direct); +void rtl92de_suspend(struct ieee80211_hw *hw); +void rtl92de_resume(struct ieee80211_hw *hw); +void rtl92d_linked_set_reg(struct ieee80211_hw *hw); + +#endif |