diff options
| -rw-r--r-- | drivers/mfd/88pm860x-core.c | 22 | ||||
| -rw-r--r-- | drivers/power/88pm860x_battery.c | 1041 | ||||
| -rw-r--r-- | drivers/power/88pm860x_charger.c | 746 | ||||
| -rw-r--r-- | drivers/power/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/power/Makefile | 2 | ||||
| -rw-r--r-- | include/linux/mfd/88pm860x.h | 84 |
6 files changed, 1905 insertions, 2 deletions
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index d09918cf1b1..229cb292008 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -18,6 +18,7 @@ #include <linux/mfd/core.h> #include <linux/mfd/88pm860x.h> #include <linux/regulator/machine.h> +#include <linux/power/charger-manager.h> #define INT_STATUS_NUM 3 @@ -84,7 +85,8 @@ static struct resource battery_resources[] __devinitdata = { static struct resource charger_resources[] __devinitdata = { {PM8607_IRQ_CHG, PM8607_IRQ_CHG, "charger detect", IORESOURCE_IRQ,}, {PM8607_IRQ_CHG_DONE, PM8607_IRQ_CHG_DONE, "charging done", IORESOURCE_IRQ,}, - {PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging timeout", IORESOURCE_IRQ,}, + {PM8607_IRQ_CHG_FAIL, PM8607_IRQ_CHG_FAIL, "charging timeout", IORESOURCE_IRQ,}, + {PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault", IORESOURCE_IRQ,}, {PM8607_IRQ_GPADC1, PM8607_IRQ_GPADC1, "battery temperature", IORESOURCE_IRQ,}, {PM8607_IRQ_VBAT, PM8607_IRQ_VBAT, "battery voltage", IORESOURCE_IRQ,}, {PM8607_IRQ_VCHG, PM8607_IRQ_VCHG, "vchg voltage", IORESOURCE_IRQ,}, @@ -155,10 +157,15 @@ static struct regulator_init_data preg_init_data = { .consumer_supplies = &preg_supply[0], }; +static struct regulator_bulk_data chg_desc_regulator_data[] = { + { .supply = "preg", }, +}; + static struct mfd_cell power_devs[] = { {"88pm860x-battery", -1,}, {"88pm860x-charger", -1,}, {"88pm860x-preg", -1,}, + {"charger-manager", -1,}, }; static struct mfd_cell rtc_devs[] = { @@ -791,6 +798,19 @@ static void __devinit device_power_init(struct pm860x_chip *chip, &preg_resources[0], chip->irq_base); if (ret < 0) dev_err(chip->dev, "Failed to add preg subdev\n"); + + if (pdata->chg_desc) { + pdata->chg_desc->charger_regulators = + &chg_desc_regulator_data[0]; + pdata->chg_desc->num_charger_regulators = + ARRAY_SIZE(chg_desc_regulator_data), + power_devs[3].platform_data = pdata->chg_desc; + power_devs[3].pdata_size = sizeof(*pdata->chg_desc); + ret = mfd_add_devices(chip->dev, 0, &power_devs[3], 1, + NULL, chip->irq_base); + if (ret < 0) + dev_err(chip->dev, "Failed to add chg-manager subdev\n"); + } } static void __devinit device_onkey_init(struct pm860x_chip *chip, diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c new file mode 100644 index 00000000000..5e905f3db4b --- /dev/null +++ b/drivers/power/88pm860x_battery.c @@ -0,0 +1,1041 @@ +/* + * Battery driver for Marvell 88PM860x PMIC + * + * Copyright (c) 2012 Marvell International Ltd. + * Author: Jett Zhou <jtzhou@marvell.com> + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/string.h> +#include <linux/power_supply.h> +#include <linux/mfd/88pm860x.h> +#include <linux/delay.h> + +/* bit definitions of Status Query Interface 2 */ +#define STATUS2_CHG (1 << 2) +#define STATUS2_BAT (1 << 3) +#define STATUS2_VBUS (1 << 4) + +/* bit definitions of Measurement Enable 1 Register */ +#define MEAS1_TINT (1 << 3) +#define MEAS1_GP1 (1 << 5) + +/* bit definitions of Measurement Enable 3 Register */ +#define MEAS3_IBAT (1 << 0) +#define MEAS3_BAT_DET (1 << 1) +#define MEAS3_CC (1 << 2) + +/* bit definitions of Measurement Off Time Register */ +#define MEAS_OFF_SLEEP_EN (1 << 1) + +/* bit definitions of GPADC Bias Current 2 Register */ +#define GPBIAS2_GPADC1_SET (2 << 4) +/* GPADC1 Bias Current value in uA unit */ +#define GPBIAS2_GPADC1_UA ((GPBIAS2_GPADC1_SET >> 4) * 5 + 1) + +/* bit definitions of GPADC Misc 1 Register */ +#define GPMISC1_GPADC_EN (1 << 0) + +/* bit definitions of Charger Control 6 Register */ +#define CC6_BAT_DET_GPADC1 1 + +/* bit definitions of Coulomb Counter Reading Register */ +#define CCNT_AVG_SEL (4 << 3) + +/* bit definitions of RTC miscellaneous Register1 */ +#define RTC_SOC_5LSB (0x1F << 3) + +/* bit definitions of RTC Register1 */ +#define RTC_SOC_3MSB (0x7) + +/* bit definitions of Power up Log register */ +#define BAT_WU_LOG (1<<6) + +/* coulomb counter index */ +#define CCNT_POS1 0 +#define CCNT_POS2 1 +#define CCNT_NEG1 2 +#define CCNT_NEG2 3 +#define CCNT_SPOS 4 +#define CCNT_SNEG 5 + +/* OCV -- Open Circuit Voltage */ +#define OCV_MODE_ACTIVE 0 +#define OCV_MODE_SLEEP 1 + +/* Vbat range of CC for measuring Rbat */ +#define LOW_BAT_THRESHOLD 3600 +#define VBATT_RESISTOR_MIN 3800 +#define VBATT_RESISTOR_MAX 4100 + +/* TBAT for batt, TINT for chip itself */ +#define PM860X_TEMP_TINT (0) +#define PM860X_TEMP_TBAT (1) + +/* + * Battery temperature based on NTC resistor, defined + * corresponding resistor value -- Ohm / C degeree. + */ +#define TBAT_NEG_25D 127773 /* -25 */ +#define TBAT_NEG_10D 54564 /* -10 */ +#define TBAT_0D 32330 /* 0 */ +#define TBAT_10D 19785 /* 10 */ +#define TBAT_20D 12468 /* 20 */ +#define TBAT_30D 8072 /* 30 */ +#define TBAT_40D 5356 /* 40 */ + +struct pm860x_battery_info { + struct pm860x_chip *chip; + struct i2c_client *i2c; + struct device *dev; + + struct power_supply battery; + struct mutex lock; + int status; + int irq_cc; + int irq_batt; + int max_capacity; + int resistor; /* Battery Internal Resistor */ + int last_capacity; + int start_soc; + unsigned present:1; + unsigned temp_type:1; /* TINT or TBAT */ +}; + +struct ccnt { + unsigned long long int pos; + unsigned long long int neg; + unsigned int spos; + unsigned int sneg; + + int total_chg; /* mAh(3.6C) */ + int total_dischg; /* mAh(3.6C) */ +}; + +/* + * State of Charge. + * The first number is mAh(=3.6C), and the second number is percent point. + */ +int array_soc[][2] = { + {4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96}, + {4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91}, + {4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86}, + {4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81}, + {3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76}, + {3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71}, + {3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66}, + {3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61}, + {3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56}, + {3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51}, + {3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46}, + {3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41}, + {3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36}, + {3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31}, + {3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26}, + {3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21}, + {3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16}, + {3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11}, + {3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6}, + {3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1}, +}; + +static struct ccnt ccnt_data; + +/* + * register 1 bit[7:0] -- bit[11:4] of measured value of voltage + * register 0 bit[3:0] -- bit[3:0] of measured value of voltage + */ +static int measure_12bit_voltage(struct pm860x_battery_info *info, + int offset, int *data) +{ + unsigned char buf[2]; + int ret; + + ret = pm860x_bulk_read(info->i2c, offset, 2, buf); + if (ret < 0) + return ret; + + *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); + /* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xfff) * 9 * 25) >> 9; + return 0; +} + +static int measure_vbatt(struct pm860x_battery_info *info, int state, + int *data) +{ + unsigned char buf[5]; + int ret; + + switch (state) { + case OCV_MODE_ACTIVE: + ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data); + if (ret) + return ret; + /* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */ + *data *= 3; + break; + case OCV_MODE_SLEEP: + /* + * voltage value of VBATT in sleep mode is saved in different + * registers. + * bit[11:10] -- bit[7:6] of LDO9(0x18) + * bit[9:8] -- bit[7:6] of LDO8(0x17) + * bit[7:6] -- bit[7:6] of LDO7(0x16) + * bit[5:4] -- bit[7:6] of LDO6(0x15) + * bit[3:0] -- bit[7:4] of LDO5(0x14) + */ + ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf); + if (ret < 0) + return ret; + ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8) + | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4) + | (buf[0] >> 4); + /* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xff) * 27 * 25) >> 9; + break; + default: + return -EINVAL; + } + return 0; +} + +/* + * Return value is signed data. + * Negative value means discharging, and positive value means charging. + */ +static int measure_current(struct pm860x_battery_info *info, int *data) +{ + unsigned char buf[2]; + short s; + int ret; + + ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf); + if (ret < 0) + return ret; + + s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); + /* current(mA) = value * 0.125 */ + *data = s >> 3; + return 0; +} + +static int set_charger_current(struct pm860x_battery_info *info, int data, + int *old) +{ + int ret; + + if (data < 50 || data > 1600 || !old) + return -EINVAL; + + data = ((data - 50) / 50) & 0x1f; + *old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2); + *old = (*old & 0x1f) * 50 + 50; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data); + if (ret < 0) + return ret; + return 0; +} + +static int read_ccnt(struct pm860x_battery_info *info, int offset, + int *ccnt) +{ + unsigned char buf[2]; + int ret; + + ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7); + if (ret < 0) + goto out; + ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf); + if (ret < 0) + goto out; + *ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff); + return 0; +out: + return ret; +} + +static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) +{ + unsigned int sum; + int ret; + int data; + + ret = read_ccnt(info, CCNT_POS1, &data); + if (ret) + goto out; + sum = data & 0xffff; + ret = read_ccnt(info, CCNT_POS2, &data); + if (ret) + goto out; + sum |= (data & 0xffff) << 16; + ccnt->pos += sum; + + ret = read_ccnt(info, CCNT_NEG1, &data); + if (ret) + goto out; + sum = data & 0xffff; + ret = read_ccnt(info, CCNT_NEG2, &data); + if (ret) + goto out; + sum |= (data & 0xffff) << 16; + sum = ~sum + 1; /* since it's negative */ + ccnt->neg += sum; + + ret = read_ccnt(info, CCNT_SPOS, &data); + if (ret) + goto out; + ccnt->spos += data; + ret = read_ccnt(info, CCNT_SNEG, &data); + if (ret) + goto out; + + /* + * charge(mAh) = count * 1.6984 * 1e(-8) + * = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40) + * = count * 18236 / (2 ^ 40) + */ + ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40); + ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40); + return 0; +out: + return ret; +} + +static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt) +{ + int data; + + memset(ccnt, 0, sizeof(*ccnt)); + /* read to clear ccnt */ + read_ccnt(info, CCNT_POS1, &data); + read_ccnt(info, CCNT_POS2, &data); + read_ccnt(info, CCNT_NEG1, &data); + read_ccnt(info, CCNT_NEG2, &data); + read_ccnt(info, CCNT_SPOS, &data); + read_ccnt(info, CCNT_SNEG, &data); + return 0; +} + +/* Calculate Open Circuit Voltage */ +static int calc_ocv(struct pm860x_battery_info *info, int *ocv) +{ + int ret; + int i; + int data; + int vbatt_avg; + int vbatt_sum; + int ibatt_avg; + int ibatt_sum; + + if (!ocv) + return -EINVAL; + + for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + vbatt_sum += data; + ret = measure_current(info, &data); + if (ret) + goto out; + ibatt_sum += data; + } + vbatt_avg = vbatt_sum / 10; + ibatt_avg = ibatt_sum / 10; + + mutex_lock(&info->lock); + if (info->present) + *ocv = vbatt_avg - ibatt_avg * info->resistor / 1000; + else + *ocv = vbatt_avg; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv); + return 0; +out: + return ret; +} + +/* Calculate State of Charge (percent points) */ +static int calc_soc(struct pm860x_battery_info *info, int state, int *soc) +{ + int i; + int ocv; + int count; + int ret = -EINVAL; + + if (!soc) + return -EINVAL; + + switch (state) { + case OCV_MODE_ACTIVE: + ret = calc_ocv(info, &ocv); + break; + case OCV_MODE_SLEEP: + ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv); + break; + } + if (ret) + return ret; + + count = ARRAY_SIZE(array_soc); + if (ocv < array_soc[count - 1][0]) { + *soc = 0; + return 0; + } + + for (i = 0; i < count; i++) { + if (ocv >= array_soc[i][0]) { + *soc = array_soc[i][1]; + break; + } + } + return 0; +} + +static irqreturn_t pm860x_coulomb_handler(int irq, void *data) +{ + struct pm860x_battery_info *info = data; + + calc_ccnt(info, &ccnt_data); + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_batt_handler(int irq, void *data) +{ + struct pm860x_battery_info *info = data; + int ret; + + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret & STATUS2_BAT) { + info->present = 1; + info->temp_type = PM860X_TEMP_TBAT; + } else { + info->present = 0; + info->temp_type = PM860X_TEMP_TINT; + } + mutex_unlock(&info->lock); + /* clear ccnt since battery is attached or dettached */ + clear_ccnt(info, &ccnt_data); + return IRQ_HANDLED; +} + +static void pm860x_init_battery(struct pm860x_battery_info *info) +{ + unsigned char buf[2]; + int ret; + int data; + int bat_remove; + int soc; + + /* measure enable on GPADC1 */ + data = MEAS1_GP1; + if (info->temp_type == PM860X_TEMP_TINT) + data |= MEAS1_TINT; + ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data); + if (ret) + goto out; + + /* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */ + data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC; + ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data); + if (ret) + goto out; + + /* measure disable CC in sleep time */ + ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82); + if (ret) + goto out; + ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c); + if (ret) + goto out; + + /* enable GPADC */ + ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1, + GPMISC1_GPADC_EN, GPMISC1_GPADC_EN); + if (ret < 0) + goto out; + + /* detect battery via GPADC1 */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, + CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1); + if (ret < 0) + goto out; + + ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3, + CCNT_AVG_SEL); + if (ret < 0) + goto out; + + /* set GPADC1 bias */ + ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4, + GPBIAS2_GPADC1_SET); + if (ret < 0) + goto out; + + /* check whether battery present) */ + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) { + mutex_unlock(&info->lock); + goto out; + } + if (ret & STATUS2_BAT) { + info->present = 1; + info->temp_type = PM860X_TEMP_TBAT; + } else { + info->present = 0; + info->temp_type = PM860X_TEMP_TINT; + } + mutex_unlock(&info->lock); + + calc_soc(info, OCV_MODE_ACTIVE, &soc); + + data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG); + bat_remove = data & BAT_WU_LOG; + + dev_dbg(info->dev, "battery wake up? %s\n", + bat_remove != 0 ? "yes" : "no"); + + /* restore SOC from RTC domain register */ + if (bat_remove == 0) { + buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2); + buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1); + data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F); + if (data > soc + 15) + info->start_soc = soc; + else if (data < soc - 15) + info->start_soc = soc; + else + info->start_soc = data; + dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc); + } else { + pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG, + BAT_WU_LOG, BAT_WU_LOG); + info->start_soc = soc; + } + info->last_capacity = info->start_soc; + dev_dbg(info->dev, "init soc : %d\n", info->last_capacity); +out: + return; +} + +static void set_temp_threshold(struct pm860x_battery_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 8) / 1800; + pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data); + dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 8) / 1800; + pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data); + dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data); +} + +static int measure_temp(struct pm860x_battery_info *info, int *data) +{ + int ret; + int temp; + int min; + int max; + + if (info->temp_type == PM860X_TEMP_TINT) { + ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data); + if (ret) + return ret; + *data = (*data - 884) * 1000 / 3611; + } else { + ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data); + if (ret) + return ret; + /* meausered Vtbat(mV) / Ibias_current(11uA)*/ + *data = (*data * 1000) / GPBIAS2_GPADC1_UA; + + if (*data > TBAT_NEG_25D) { + temp = -30; /* over cold , suppose -30 roughly */ + max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, 0, max); + } else if (*data > TBAT_NEG_10D) { + temp = -15; /* -15 degree, code */ + max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, 0, max); + } else if (*data > TBAT_0D) { + temp = -5; /* -5 degree */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_10D) { + temp = 5; /* in range of (0, 10) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_20D) { + temp = 15; /* in range of (10, 20) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_30D) { + temp = 25; /* in range of (20, 30) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else if (*data > TBAT_40D) { + temp = 35; /* in range of (30, 40) */ + min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000; + max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, max); + } else { + min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000; + set_temp_threshold(info, min, 0); + temp = 45; /* over heat ,suppose 45 roughly */ + } + + dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data); + *data = temp; + } + return 0; +} + +static int calc_resistor(struct pm860x_battery_info *info) +{ + int vbatt_sum1; + int vbatt_sum2; + int chg_current; + int ibatt_sum1; + int ibatt_sum2; + int data; + int ret; + int i; + + ret = measure_current(info, &data); + /* make sure that charging is launched by data > 0 */ + if (ret || data < 0) + goto out; + + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + /* calculate resistor only in CC charge mode */ + if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX) + goto out; + + /* current is saved */ + if (set_charger_current(info, 500, &chg_current)) + goto out; + + /* + * set charge current as 500mA, wait about 500ms till charging + * process is launched and stable with the newer charging current. + */ + msleep(500); + + for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out_meas; + vbatt_sum1 += data; + ret = measure_current(info, &data); + if (ret) + goto out_meas; + + if (data < 0) + ibatt_sum1 = ibatt_sum1 - data; /* discharging */ + else + ibatt_sum1 = ibatt_sum1 + data; /* charging */ + } + + if (set_charger_current(info, 100, &ret)) + goto out_meas; + /* + * set charge current as 100mA, wait about 500ms till charging + * process is launched and stable with the newer charging current. + */ + msleep(500); + + for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) { + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out_meas; + vbatt_sum2 += data; + ret = measure_current(info, &data); + if (ret) + goto out_meas; + + if (data < 0) + ibatt_sum2 = ibatt_sum2 - data; /* discharging */ + else + ibatt_sum2 = ibatt_sum2 + data; /* charging */ + } + + /* restore current setting */ + if (set_charger_current(info, chg_current, &ret)) + goto out_meas; + + if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) && + (ibatt_sum2 > 0)) { + /* calculate resistor in discharging case */ + data = 1000 * (vbatt_sum1 - vbatt_sum2) + / (ibatt_sum1 - ibatt_sum2); + if ((data - info->resistor > 0) && + (data - info->resistor < info->resistor)) + info->resistor = data; + if ((info->resistor - data > 0) && + (info->resistor - data < data)) + info->resistor = data; + } + return 0; + +out_meas: + set_charger_current(info, chg_current, &ret); +out: + return -EINVAL; +} + +static int calc_capacity(struct pm860x_battery_info *info, int *cap) +{ + int ret; + int data; + int ibat; + int cap_ocv = 0; + int cap_cc = 0; + + ret = calc_ccnt(info, &ccnt_data); + if (ret) + goto out; +soc: + data = info->max_capacity * info->start_soc / 100; + if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) { + cap_cc = + data + ccnt_data.total_chg - ccnt_data.total_dischg; + } else { + clear_ccnt(info, &ccnt_data); + calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc); + dev_dbg(info->dev, "restart soc = %d !\n", + info->start_soc); + goto soc; + } + + cap_cc = cap_cc * 100 / info->max_capacity; + if (cap_cc < 0) + cap_cc = 0; + else if (cap_cc > 100) + cap_cc = 100; + + dev_dbg(info->dev, "%s, last cap : %d", __func__, + info->last_capacity); + + ret = measure_current(info, &ibat); + if (ret) + goto out; + /* Calculate the capacity when discharging(ibat < 0) */ + if (ibat < 0) { + ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv); + if (ret) + cap_ocv = info->last_capacity; + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + goto out; + if (data <= LOW_BAT_THRESHOLD) { + /* choose the lower capacity value to report + * between vbat and CC when vbat < 3.6v; + * than 3.6v; + */ + *cap = min(cap_ocv, cap_cc); + } else { + /* when detect vbat > 3.6v, but cap_cc < 15,and + * cap_ocv is 10% larger than cap_cc, we can think + * CC have some accumulation error, switch to OCV + * to estimate capacity; + * */ + if (cap_cc < 15 && cap_ocv - cap_cc > 10) + *cap = cap_ocv; + else + *cap = cap_cc; + } + /* when discharging, make sure current capacity + * is lower than last*/ + if (*cap > info->last_capacity) + *cap = info->last_capacity; + } else { + *cap = cap_cc; + } + info->last_capacity = *cap; + + dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n", + (ibat < 0) ? "discharging" : "charging", + cap_ocv, cap_cc, *cap); + /* + * store the current capacity to RTC domain register, + * after next power up , it will be restored. + */ + pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB, + (*cap & 0x1F) << 3); + pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB, + ((*cap >> 5) & 0x3)); + return 0; +out: + return ret; +} + +static void pm860x_external_power_changed(struct power_supply *psy) +{ + struct pm860x_battery_info *info; + + info = container_of(psy, struct pm860x_battery_info, battery); + calc_resistor(info); +} + +static int pm860x_batt_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent); + int data; + int ret; + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + val->intval = info->present; + break; + case POWER_SUPPLY_PROP_CAPACITY: + ret = calc_capacity(info, &data); + if (ret) + return ret; + if (data < 0) + data = 0; + else if (data > 100) + data = 100; + /* return 100 if battery is not attached */ + if (!info->present) + data = 100; + val->intval = data; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + /* return real vbatt Voltage */ + ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data); + if (ret) + return ret; + val->intval = data * 1000; + break; + case POWER_SUPPLY_PROP_VOLTAGE_AVG: + /* return Open Circuit Voltage (not measured voltage) */ + ret = calc_ocv(info, &data); + if (ret) + return ret; + val->intval = data * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + ret = measure_current(info, &data); + if (ret) + return ret; + val->intval = data; + break; + case POWER_SUPPLY_PROP_TEMP: + if (info->present) { + ret = measure_temp(info, &data); + if (ret) + return ret; + data *= 10; + } else { + /* Fake Temp 25C Without Battery */ + data = 250; + } + val->intval = data; + break; + default: + return -ENODEV; + } + return 0; +} + +static int pm860x_batt_set_prop(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_FULL: + clear_ccnt(info, &ccnt_data); + info->start_soc = 100; + dev_dbg(info->dev, "chg done, update soc = %d\n", + info->start_soc); + break; + default: + return -EPERM; + } + + return 0; +} + + +static enum power_supply_property pm860x_batt_props[] = { + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_VOLTAGE_AVG, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_TEMP, +}; + +static __devinit int pm860x_battery_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_battery_info *info; + struct pm860x_power_pdata *pdata; + int ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->irq_cc = platform_get_irq(pdev, 0); + if (info->irq_cc <= 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + ret = -EINVAL; + goto out; + } + + info->irq_batt = platform_get_irq(pdev, 1); + if (info->irq_batt <= 0) { + dev_err(&pdev->dev, "No IRQ resource!\n"); + ret = -EINVAL; + goto out; + } + + info->chip = chip; + info->i2c = + (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + info->dev = &pdev->dev; + info->status = POWER_SUPPLY_STATUS_UNKNOWN; + pdata = pdev->dev.platform_data; + + mutex_init(&info->lock); + platform_set_drvdata(pdev, info); + + pm860x_init_battery(info); + + info->battery.name = "battery-monitor"; + info->battery.type = POWER_SUPPLY_TYPE_BATTERY; + info->battery.properties = pm860x_batt_props; + info->battery.num_properties = ARRAY_SIZE(pm860x_batt_props); + info->battery.get_property = pm860x_batt_get_prop; + info->battery.set_property = pm860x_batt_set_prop; + info->battery.external_power_changed = pm860x_external_power_changed; + + if (pdata && pdata->max_capacity) + info->max_capacity = pdata->max_capacity; + else + info->max_capacity = 1500; /* set default capacity */ + if (pdata && pdata->resistor) + info->resistor = pdata->resistor; + else + info->resistor = 300; /* set default internal resistor */ + + ret = power_supply_register(&pdev->dev, &info->battery); + if (ret) + goto out; + info->battery.dev->parent = &pdev->dev; + + ret = request_threaded_irq(info->irq_cc, NULL, + pm860x_coulomb_handler, IRQF_ONESHOT, + "coulomb", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq_cc, ret); + goto out_reg; + } + + ret = request_threaded_irq(info->irq_batt, NULL, pm860x_batt_handler, + IRQF_ONESHOT, "battery", info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq_batt, ret); + goto out_coulomb; + } + + + return 0; + +out_coulomb: + free_irq(info->irq_cc, info); +out_reg: + power_supply_unregister(&info->battery); +out: + kfree(info); + return ret; +} + +static int __devexit pm860x_battery_remove(struct platform_device *pdev) +{ + struct pm860x_battery_info *info = platform_get_drvdata(pdev); + + power_supply_unregister(&info->battery); + free_irq(info->irq_batt, info); + free_irq(info->irq_cc, info); + kfree(info); + platform_set_drvdata(pdev, NULL); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pm860x_battery_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag |= 1 << PM8607_IRQ_CC; + return 0; +} + +static int pm860x_battery_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) + chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC); + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops, + pm860x_battery_suspend, pm860x_battery_resume); + +static struct platform_driver pm860x_battery_driver = { + .driver = { + .name = "88pm860x-battery", + .owner = THIS_MODULE, + .pm = &pm860x_battery_pm_ops, + }, + .probe = pm860x_battery_probe, + .remove = __devexit_p(pm860x_battery_remove), +}; +module_platform_driver(pm860x_battery_driver); + +MODULE_DESCRIPTION("Marvell 88PM860x Battery driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c new file mode 100644 index 00000000000..4fd7614ee83 --- /dev/null +++ b/drivers/power/88pm860x_charger.c @@ -0,0 +1,746 @@ +/* + * Battery driver for Marvell 88PM860x PMIC + * + * Copyright (c) 2012 Marvell International Ltd. + * Author: Jett Zhou <jtzhou@marvell.com> + * Haojian Zhuang <haojian.zhuang@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/power_supply.h> +#include <linux/mfd/88pm860x.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <asm/div64.h> + +/* bit definitions of Status Query Interface 2 */ +#define STATUS2_CHG (1 << 2) + +/* bit definitions of Reset Out Register */ +#define RESET_SW_PD (1 << 7) + +/* bit definitions of PreReg 1 */ +#define PREREG1_90MA (0x0) +#define PREREG1_180MA (0x1) +#define PREREG1_450MA (0x4) +#define PREREG1_540MA (0x5) +#define PREREG1_1350MA (0xE) +#define PREREG1_VSYS_4_5V (3 << 4) + +/* bit definitions of Charger Control 1 Register */ +#define CC1_MODE_OFF (0) +#define CC1_MODE_PRECHARGE (1) +#define CC1_MODE_FASTCHARGE (2) +#define CC1_MODE_PULSECHARGE (3) +#define CC1_ITERM_20MA (0 << 2) +#define CC1_ITERM_60MA (2 << 2) +#define CC1_VFCHG_4_2V (9 << 4) + +/* bit definitions of Charger Control 2 Register */ +#define CC2_ICHG_100MA (0x1) +#define CC2_ICHG_500MA (0x9) +#define CC2_ICHG_1000MA (0x13) + +/* bit definitions of Charger Control 3 Register */ +#define CC3_180MIN_TIMEOUT (0x6 << 4) +#define CC3_270MIN_TIMEOUT (0x7 << 4) +#define CC3_360MIN_TIMEOUT (0xA << 4) +#define CC3_DISABLE_TIMEOUT (0xF << 4) + +/* bit definitions of Charger Control 4 Register */ +#define CC4_IPRE_40MA (7) +#define CC4_VPCHG_3_2V (3 << 4) +#define CC4_IFCHG_MON_EN (1 << 6) +#define CC4_BTEMP_MON_EN (1 << 7) + +/* bit definitions of Charger Control 6 Register */ +#define CC6_BAT_OV_EN (1 << 2) +#define CC6_BAT_UV_EN (1 << 3) +#define CC6_UV_VBAT_SET (0x3 << 6) /* 2.8v */ + +/* bit definitions of Charger Control 7 Register */ +#define CC7_BAT_REM_EN (1 << 3) +#define CC7_IFSM_EN (1 << 7) + +/* bit definitions of Measurement Enable 1 Register */ +#define MEAS1_VBAT (1 << 0) + +/* bit definitions of Measurement Enable 3 Register */ +#define MEAS3_IBAT_EN (1 << 0) +#define MEAS3_CC_EN (1 << 2) + +#define FSM_INIT 0 +#define FSM_DISCHARGE 1 +#define FSM_PRECHARGE 2 +#define FSM_FASTCHARGE 3 + +#define PRECHARGE_THRESHOLD 3100 +#define POWEROFF_THRESHOLD 3400 +#define CHARGE_THRESHOLD 4000 +#define DISCHARGE_THRESHOLD 4180 + +/* over-temperature on PM8606 setting */ +#define OVER_TEMP_FLAG (1 << 6) +#define OVTEMP_AUTORECOVER (1 << 3) + +/* over-voltage protect on vchg setting mv */ +#define VCHG_NORMAL_LOW 4200 +#define VCHG_NORMAL_CHECK 5800 +#define VCHG_NORMAL_HIGH 6000 +#define VCHG_OVP_LOW 5500 + +struct pm860x_charger_info { + struct pm860x_chip *chip; + struct i2c_client *i2c; + struct i2c_client *i2c_8606; + struct device *dev; + + struct power_supply usb; + struct mutex lock; + int irq_nums; + int irq[7]; + unsigned state:3; /* fsm state */ + unsigned online:1; /* usb charger */ + unsigned present:1; /* battery present */ + unsigned allowed:1; +}; + +static char *pm860x_supplied_to[] = { + "battery-monitor", +}; + +static int measure_vchg(struct pm860x_charger_info *info, int *data) +{ + unsigned char buf[2]; + int ret = 0; + + ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf); + if (ret < 0) + return ret; + + *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f); + /* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */ + *data = ((*data & 0xfff) * 9 * 125) >> 9; + + dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data); + + return ret; +} + +static void set_vchg_threshold(struct pm860x_charger_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) * / 5 / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 5) / 1125; + pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data); + dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 5) / 1125; + pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data); + dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data); + +} + +static void set_vbatt_threshold(struct pm860x_charger_info *info, + int min, int max) +{ + int data; + + /* (tmp << 8) * 3 / 1800 */ + if (min <= 0) + data = 0; + else + data = (min << 5) / 675; + pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data); + dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data); + + if (max <= 0) + data = 0xff; + else + data = (max << 5) / 675; + pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data); + dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data); + + return; +} + +static int start_precharge(struct pm860x_charger_info *info) +{ + int ret; + + dev_dbg(info->dev, "Start Pre-charging!\n"); + set_vbatt_threshold(info, 0, 0); + + ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA, + PREREG1_1350MA | PREREG1_VSYS_4_5V); + if (ret < 0) + goto out; + /* stop charging */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, + CC1_MODE_OFF); + if (ret < 0) + goto out; + /* set 270 minutes timeout */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4), + CC3_270MIN_TIMEOUT); + if (ret < 0) + goto out; + /* set precharge current, termination voltage, IBAT & TBAT monitor */ + ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4, + CC4_IPRE_40MA | CC4_VPCHG_3_2V | + CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7, + CC7_BAT_REM_EN | CC7_IFSM_EN, + CC7_BAT_REM_EN | CC7_IFSM_EN); + if (ret < 0) + goto out; + /* trigger precharge */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, + CC1_MODE_PRECHARGE); +out: + return ret; +} + +static int start_fastcharge(struct pm860x_charger_info *info) +{ + int ret; + + dev_dbg(info->dev, "Start Fast-charging!\n"); + + /* set fastcharge termination current & voltage, disable charging */ + ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1, + CC1_MODE_OFF | CC1_ITERM_60MA | + CC1_VFCHG_4_2V); + if (ret < 0) + goto out; + ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA, + PREREG1_540MA | PREREG1_VSYS_4_5V); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, + CC2_ICHG_500MA); + if (ret < 0) + goto out; + /* set 270 minutes timeout */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4), + CC3_270MIN_TIMEOUT); + if (ret < 0) + goto out; + /* set IBAT & TBAT monitor */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4, + CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN, + CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6, + CC6_BAT_OV_EN | CC6_BAT_UV_EN | + CC6_UV_VBAT_SET, + CC6_BAT_OV_EN | CC6_BAT_UV_EN | + CC6_UV_VBAT_SET); + if (ret < 0) + goto out; + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7, + CC7_BAT_REM_EN | CC7_IFSM_EN, + CC7_BAT_REM_EN | CC7_IFSM_EN); + if (ret < 0) + goto out; + /* launch fast-charge */ + ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, + CC1_MODE_FASTCHARGE); + /* vchg threshold setting */ + set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH); +out: + return ret; +} + +static void stop_charge(struct pm860x_charger_info *info, int vbatt) +{ + dev_dbg(info->dev, "Stop charging!\n"); + pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF); + if (vbatt > CHARGE_THRESHOLD && info->online) + set_vbatt_threshold(info, CHARGE_THRESHOLD, 0); +} + +static void power_off_notification(struct pm860x_charger_info *info) +{ + dev_dbg(info->dev, "Power-off notification!\n"); +} + +static int set_charging_fsm(struct pm860x_charger_info *info) +{ + struct power_supply *psy; + union power_supply_propval data; + unsigned char fsm_state[][16] = { "init", "discharge", "precharge", + "fastcharge", + }; + int ret; + int vbatt; + + psy = power_supply_get_by_name(pm860x_supplied_to[0]); + if (!psy) + return -EINVAL; + ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &data); + if (ret) + return ret; + vbatt = data.intval / 1000; + + ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data); + if (ret) + return ret; + + mutex_lock(&info->lock); + info->present = data.intval; + + dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, " + "Allowed:%d\n", + &fsm_state[info->state][0], + (info->online) ? "online" : "N/A", + (info->present) ? "present" : "N/A", info->allowed); + dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt); + + switch (info->state) { + case FSM_INIT: + if (info->online && info->present && info->allowed) { + if (vbatt < PRECHARGE_THRESHOLD) { + info->state = FSM_PRECHARGE; + start_precharge(info); + } else if (vbatt > DISCHARGE_THRESHOLD) { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } else if (vbatt < DISCHARGE_THRESHOLD) { + info->state = FSM_FASTCHARGE; + start_fastcharge(info); + } + } else { + if (vbatt < POWEROFF_THRESHOLD) { + power_off_notification(info); + } else { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } + } + break; + case FSM_PRECHARGE: + if (info->online && info->present && info->allowed) { + if (vbatt > PRECHARGE_THRESHOLD) { + info->state = FSM_FASTCHARGE; + start_fastcharge(info); + } + } else { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } + break; + case FSM_FASTCHARGE: + if (info->online && info->present && info->allowed) { + if (vbatt < PRECHARGE_THRESHOLD) { + info->state = FSM_PRECHARGE; + start_precharge(info); + } + } else { + info->state = FSM_DISCHARGE; + stop_charge(info, vbatt); + } + break; + case FSM_DISCHARGE: + if (info->online && info->present && info->allowed) { + if (vbatt < PRECHARGE_THRESHOLD) { + info->state = FSM_PRECHARGE; + start_precharge(info); + } else if (vbatt < DISCHARGE_THRESHOLD) { + info->state = FSM_FASTCHARGE; + start_fastcharge(info); + } + } else { + if (vbatt < POWEROFF_THRESHOLD) + power_off_notification(info); + else if (vbatt > CHARGE_THRESHOLD && info->online) + set_vbatt_threshold(info, CHARGE_THRESHOLD, 0); + } + break; + default: + dev_warn(info->dev, "FSM meets wrong state:%d\n", + info->state); + break; + } + dev_dbg(info->dev, + "Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n", + &fsm_state[info->state][0], + (info->online) ? "online" : "N/A", + (info->present) ? "present" : "N/A", info->allowed); + mutex_unlock(&info->lock); + + return 0; +} + +static irqreturn_t pm860x_charger_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + int ret; + + mutex_lock(&info->lock); + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) { + mutex_unlock(&info->lock); + goto out; + } + if (ret & STATUS2_CHG) { + info->online = 1; + info->allowed = 1; + } else { + info->online = 0; + info->allowed = 0; + } + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__, + (info->online) ? "online" : "N/A", info->allowed); + + set_charging_fsm(info); + + power_supply_changed(&info->usb); +out: + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_temp_handler(int irq, void *data) +{ + struct power_supply *psy; + struct pm860x_charger_info *info = data; + union power_supply_propval temp; + int value; + int ret; + + psy = power_supply_get_by_name(pm860x_supplied_to[0]); + if (!psy) + goto out; + ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp); + if (ret) + goto out; + value = temp.intval / 10; + + mutex_lock(&info->lock); + /* Temperature < -10 C or >40 C, Will not allow charge */ + if (value < -10 || value > 40) + info->allowed = 0; + else + info->allowed = 1; + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + mutex_unlock(&info->lock); + + set_charging_fsm(info); +out: + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_exception_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + + mutex_lock(&info->lock); + info->allowed = 0; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq); + + set_charging_fsm(info); + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_done_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + struct power_supply *psy; + union power_supply_propval val; + int ret; + int vbatt; + + mutex_lock(&info->lock); + /* pre-charge done, will transimit to fast-charge stage */ + if (info->state == FSM_PRECHARGE) { + info->allowed = 1; + goto out; + } + /* + * Fast charge done, delay to read + * the correct status of CHG_DET. + */ + mdelay(5); + info->allowed = 0; + psy = power_supply_get_by_name(pm860x_supplied_to[0]); + if (!psy) + goto out; + ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &val); + if (ret) + goto out; + vbatt = val.intval / 1000; + /* + * CHG_DONE interrupt is faster than CHG_DET interrupt when + * plug in/out usb, So we can not rely on info->online, we + * need check pm8607 status register to check usb is online + * or not, then we can decide it is real charge done + * automatically or it is triggered by usb plug out; + */ + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) + goto out; + if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG) + psy->set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, &val); + +out: + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + set_charging_fsm(info); + + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_vbattery_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + + mutex_lock(&info->lock); + + set_vbatt_threshold(info, 0, 0); + + if (info->present && info->online) + info->allowed = 1; + else + info->allowed = 0; + mutex_unlock(&info->lock); + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + + set_charging_fsm(info); + + return IRQ_HANDLED; +} + +static irqreturn_t pm860x_vchg_handler(int irq, void *data) +{ + struct pm860x_charger_info *info = data; + int vchg = 0; + + if (info->present) + goto out; + + measure_vchg(info, &vchg); + + mutex_lock(&info->lock); + if (!info->online) { + int status; + /* check if over-temp on pm8606 or not */ + status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS); + if (status & OVER_TEMP_FLAG) { + /* clear over temp flag and set auto recover */ + pm860x_set_bits(info->i2c_8606, PM8606_FLAGS, + OVER_TEMP_FLAG, OVER_TEMP_FLAG); + pm860x_set_bits(info->i2c_8606, + PM8606_VSYS, + OVTEMP_AUTORECOVER, + OVTEMP_AUTORECOVER); + dev_dbg(info->dev, + "%s, pm8606 over-temp occure\n", __func__); + } + } + + if (vchg > VCHG_NORMAL_CHECK) { + set_vchg_threshold(info, VCHG_OVP_LOW, 0); + info->allowed = 0; + dev_dbg(info->dev, + "%s,pm8607 over-vchg occure,vchg = %dmv\n", + __func__, vchg); + } else if (vchg < VCHG_OVP_LOW) { + set_vchg_threshold(info, VCHG_NORMAL_LOW, + VCHG_NORMAL_HIGH); + info->allowed = 1; + dev_dbg(info->dev, + "%s,pm8607 over-vchg recover,vchg = %dmv\n", + __func__, vchg); + } + mutex_unlock(&info->lock); + + dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed); + set_charging_fsm(info); +out: + return IRQ_HANDLED; +} + +static int pm860x_usb_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct pm860x_charger_info *info = + dev_get_drvdata(psy->dev->parent); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (info->state == FSM_FASTCHARGE || + info->state == FSM_PRECHARGE) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = info->online; + break; + default: + return -ENODEV; + } + return 0; +} + +static enum power_supply_property pm860x_usb_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, +}; + +static int pm860x_init_charger(struct pm860x_charger_info *info) +{ + int ret; + + ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2); + if (ret < 0) + return ret; + + mutex_lock(&info->lock); + info->state = FSM_INIT; + if (ret & STATUS2_CHG) { + info->online = 1; + info->allowed = 1; + } else { + info->online = 0; + info->allowed = 0; + } + mutex_unlock(&info->lock); + + set_charging_fsm(info); + return 0; +} + +struct pm860x_irq_desc { + const char *name; + irqreturn_t (*handler)(int irq, void *data); +} pm860x_irq_descs[] = { + { "usb supply detect", pm860x_charger_handler }, + { "charge done", pm860x_done_handler }, + { "charge timeout", pm860x_exception_handler }, + { "charge fault", pm860x_exception_handler }, + { "temperature", pm860x_temp_handler }, + { "vbatt", pm860x_vbattery_handler }, + { "vchg", pm860x_vchg_handler }, +}; + +static __devinit int pm860x_charger_probe(struct platform_device *pdev) +{ + struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct pm860x_charger_info *info; + int ret; + int count; + int i; + int j; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + count = pdev->num_resources; + for (i = 0, j = 0; i < count; i++) { + info->irq[j] = platform_get_irq(pdev, i); + if (info->irq[j] < 0) + continue; + j++; + } + info->irq_nums = j; + + info->chip = chip; + info->i2c = + (chip->id == CHIP_PM8607) ? chip->client : chip->companion; + info->i2c_8606 = + (chip->id == CHIP_PM8607) ? chip->companion : chip->client; + if (!info->i2c_8606) { + dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n"); + ret = -EINVAL; + goto out; + } + info->dev = &pdev->dev; + + /* set init value for the case we are not using battery */ + set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW); + + mutex_init(&info->lock); + platform_set_drvdata(pdev, info); + + info->usb.name = "usb"; + info->usb.type = POWER_SUPPLY_TYPE_USB; + info->usb.supplied_to = pm860x_supplied_to; + info->usb.num_supplicants = ARRAY_SIZE(pm860x_supplied_to); + info->usb.properties = pm860x_usb_props; + info->usb.num_properties = ARRAY_SIZE(pm860x_usb_props); + info->usb.get_property = pm860x_usb_get_prop; + ret = power_supply_register(&pdev->dev, &info->usb); + if (ret) + goto out; + + pm860x_init_charger(info); + + for (i = 0; i < ARRAY_SIZE(info->irq); i++) { + ret = request_threaded_irq(info->irq[i], NULL, + pm860x_irq_descs[i].handler, + IRQF_ONESHOT, pm860x_irq_descs[i].name, info); + if (ret < 0) { + dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", + info->irq[i], ret); + goto out_irq; + } + } + return 0; + +out_irq: + while (--i >= 0) + free_irq(info->irq[i], info); +out: + kfree(info); + return ret; +} + +static int __devexit pm860x_charger_remove(struct platform_device *pdev) +{ + struct pm860x_charger_info *info = platform_get_drvdata(pdev); + int i; + + platform_set_drvdata(pdev, NULL); + power_supply_unregister(&info->usb); + free_irq(info->irq[0], info); + for (i = 0; i < info->irq_nums; i++) + free_irq(info->irq[i], info); + kfree(info); + return 0; +} + +static struct platform_driver pm860x_charger_driver = { + .driver = { + .name = "88pm860x-charger", + .owner = THIS_MODULE, + }, + .probe = pm860x_charger_probe, + .remove = __devexit_p(pm860x_charger_remove), +}; +module_platform_driver(pm860x_charger_driver); + +MODULE_DESCRIPTION("Marvell 88PM860x Charger driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 4ec2ff0ee4a..9d804773584 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -62,6 +62,12 @@ config TEST_POWER help This driver is used for testing. It's safe to say M here. +config BATTERY_88PM860X + tristate "Marvell 88PM860x battery driver" + depends on MFD_88PM860X + help + Say Y here to enable battery monitor for Marvell 88PM860x chip. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" depends on W1 && W1_SLAVE_DS2760 @@ -202,6 +208,12 @@ config BATTERY_S3C_ADC help Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery +config CHARGER_88PM860X + tristate "Marvell 88PM860x Charger driver" + depends on MFD_88PM860X && BATTERY_88PM860X + help + Say Y here to enable charger for Marvell 88PM860x chip. + config CHARGER_PCF50633 tristate "NXP PCF50633 MBC" depends on MFD_PCF50633 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 587c5f17462..059c0a93152 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_WM831X_POWER) += wm831x_power.o obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_TEST_POWER) += test_power.o +obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o @@ -31,6 +32,7 @@ obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o obj-$(CONFIG_BATTERY_Z2) += z2_battery.o obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o +obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h index 7b24943779f..b7c5a3c27c9 100644 --- a/include/linux/mfd/88pm860x.h +++ b/include/linux/mfd/88pm860x.h @@ -55,6 +55,21 @@ enum { #define PM8606_DCM_BOOST (0x00) #define PM8606_PWM (0x01) +#define PM8607_MISC2 (0x42) + +/* Power Up Log Register */ +#define PM8607_POWER_UP_LOG (0x3F) + +/* Charger Control Registers */ +#define PM8607_CCNT (0x47) +#define PM8607_CHG_CTRL1 (0x48) +#define PM8607_CHG_CTRL2 (0x49) +#define PM8607_CHG_CTRL3 (0x4A) +#define PM8607_CHG_CTRL4 (0x4B) +#define PM8607_CHG_CTRL5 (0x4C) +#define PM8607_CHG_CTRL6 (0x4D) +#define PM8607_CHG_CTRL7 (0x4E) + /* Backlight Registers */ #define PM8606_WLED1A (0x02) #define PM8606_WLED1B (0x03) @@ -205,6 +220,71 @@ enum { #define PM8607_PD_PREBIAS (0x56) /* prebias time */ #define PM8607_GPADC_MISC1 (0x57) +/* bit definitions of MEAS_EN1*/ +#define PM8607_MEAS_EN1_VBAT (1 << 0) +#define PM8607_MEAS_EN1_VCHG (1 << 1) +#define PM8607_MEAS_EN1_VSYS (1 << 2) +#define PM8607_MEAS_EN1_TINT (1 << 3) +#define PM8607_MEAS_EN1_RFTMP (1 << 4) +#define PM8607_MEAS_EN1_TBAT (1 << 5) +#define PM8607_MEAS_EN1_GPADC2 (1 << 6) +#define PM8607_MEAS_EN1_GPADC3 (1 << 7) + +/* Battery Monitor Registers */ +#define PM8607_GP_BIAS2 (0x5A) +#define PM8607_VBAT_LOWTH (0x5B) +#define PM8607_VCHG_LOWTH (0x5C) +#define PM8607_VSYS_LOWTH (0x5D) +#define PM8607_TINT_LOWTH (0x5E) +#define PM8607_GPADC0_LOWTH (0x5F) +#define PM8607_GPADC1_LOWTH (0x60) +#define PM8607_GPADC2_LOWTH (0x61) +#define PM8607_GPADC3_LOWTH (0x62) +#define PM8607_VBAT_HIGHTH (0x63) +#define PM8607_VCHG_HIGHTH (0x64) +#define PM8607_VSYS_HIGHTH (0x65) +#define PM8607_TINT_HIGHTH (0x66) +#define PM8607_GPADC0_HIGHTH (0x67) +#define PM8607_GPADC1_HIGHTH (0x68) +#define PM8607_GPADC2_HIGHTH (0x69) +#define PM8607_GPADC3_HIGHTH (0x6A) +#define PM8607_IBAT_MEAS1 (0x6B) +#define PM8607_IBAT_MEAS2 (0x6C) +#define PM8607_VBAT_MEAS1 (0x6D) +#define PM8607_VBAT_MEAS2 (0x6E) +#define PM8607_VCHG_MEAS1 (0x6F) +#define PM8607_VCHG_MEAS2 (0x70) +#define PM8607_VSYS_MEAS1 (0x71) +#define PM8607_VSYS_MEAS2 (0x72) +#define PM8607_TINT_MEAS1 (0x73) +#define PM8607_TINT_MEAS2 (0x74) +#define PM8607_GPADC0_MEAS1 (0x75) +#define PM8607_GPADC0_MEAS2 (0x76) +#define PM8607_GPADC1_MEAS1 (0x77) +#define PM8607_GPADC1_MEAS2 (0x78) +#define PM8607_GPADC2_MEAS1 (0x79) +#define PM8607_GPADC2_MEAS2 (0x7A) +#define PM8607_GPADC3_MEAS1 (0x7B) +#define PM8607_GPADC3_MEAS2 (0x7C) +#define PM8607_CCNT_MEAS1 (0x95) +#define PM8607_CCNT_MEAS2 (0x96) +#define PM8607_VBAT_AVG (0x97) +#define PM8607_VCHG_AVG (0x98) +#define PM8607_VSYS_AVG (0x99) +#define PM8607_VBAT_MIN (0x9A) +#define PM8607_VCHG_MIN (0x9B) +#define PM8607_VSYS_MIN (0x9C) +#define PM8607_VBAT_MAX (0x9D) +#define PM8607_VCHG_MAX (0x9E) +#define PM8607_VSYS_MAX (0x9F) + +#define PM8607_GPADC_MISC2 (0x59) +#define PM8607_GPADC0_GP_BIAS_A0 (1 << 0) +#define PM8607_GPADC1_GP_BIAS_A1 (1 << 1) +#define PM8607_GPADC2_GP_BIAS_A2 (1 << 2) +#define PM8607_GPADC3_GP_BIAS_A3 (1 << 3) +#define PM8607_GPADC2_GP_BIAS_OUT2 (1 << 6) + /* RTC Control Registers */ #define PM8607_RTC1 (0xA0) #define PM8607_RTC_COUNTER1 (0xA1) @@ -370,7 +450,8 @@ struct pm860x_touch_pdata { }; struct pm860x_power_pdata { - unsigned fast_charge; /* charge current */ + int max_capacity; + int resistor; }; struct pm860x_platform_data { @@ -379,6 +460,7 @@ struct pm860x_platform_data { struct pm860x_rtc_pdata *rtc; struct pm860x_touch_pdata *touch; struct pm860x_power_pdata *power; + struct charger_desc *chg_desc; struct regulator_init_data *regulator; unsigned short companion_addr; /* I2C address of companion chip */ |