diff options
169 files changed, 1300 insertions, 826 deletions
diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d111e3b23db..d18ecd827c4 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -3,15 +3,21 @@ biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt - - Generic Block Device Capability (/sys/block/<disk>/capability) + - Generic Block Device Capability (/sys/block/<device>/capability) +cfq-iosched.txt + - CFQ IO scheduler tunables +data-integrity.txt + - Block data integrity deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +queue-sysfs.txt + - Queue's sysfs entries request.txt - The members of struct request (in include/linux/blkdev.h) stat.txt - - Block layer statistics in /sys/block/<dev>/stat + - Block layer statistics in /sys/block/<device>/stat switching-sched.txt - Switching I/O schedulers at runtime writeback_cache_control.txt diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 6d670f57045..d89b4fe724d 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -1,3 +1,14 @@ +CFQ (Complete Fairness Queueing) +=============================== + +The main aim of CFQ scheduler is to provide a fair allocation of the disk +I/O bandwidth for all the processes which requests an I/O operation. + +CFQ maintains the per process queue for the processes which request I/O +operation(syncronous requests). In case of asynchronous requests, all the +requests from all the processes are batched together according to their +process's I/O priority. + CFQ ioscheduler tunables ======================== @@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID controller or for storage arrays), setting slice_idle=0 might end up in better throughput and acceptable latencies. +back_seek_max +------------- +This specifies, given in Kbytes, the maximum "distance" for backward seeking. +The distance is the amount of space from the current head location to the +sectors that are backward in terms of distance. + +This parameter allows the scheduler to anticipate requests in the "backward" +direction and consider them as being the "next" if they are within this +distance from the current head location. + +back_seek_penalty +----------------- +This parameter is used to compute the cost of backward seeking. If the +backward distance of request is just 1/back_seek_penalty from a "front" +request, then the seeking cost of two requests is considered equivalent. + +So scheduler will not bias toward one or the other request (otherwise scheduler +will bias toward front request). Default value of back_seek_penalty is 2. + +fifo_expire_async +----------------- +This parameter is used to set the timeout of asynchronous requests. Default +value of this is 248ms. + +fifo_expire_sync +---------------- +This parameter is used to set the timeout of synchronous requests. Default +value of this is 124ms. In case to favor synchronous requests over asynchronous +one, this value should be decreased relative to fifo_expire_async. + +slice_async +----------- +This parameter is same as of slice_sync but for asynchronous queue. The +default value is 40ms. + +slice_async_rq +-------------- +This parameter is used to limit the dispatching of asynchronous request to +device request queue in queue's slice time. The maximum number of request that +are allowed to be dispatched also depends upon the io priority. Default value +for this is 2. + +slice_sync +---------- +When a queue is selected for execution, the queues IO requests are only +executed for a certain amount of time(time_slice) before switching to another +queue. This parameter is used to calculate the time slice of synchronous +queue. + +time_slice is computed using the below equation:- +time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the +time_slice of synchronous queue, increase the value of slice_sync. Default +value is 100ms. + +quantum +------- +This specifies the number of request dispatched to the device queue. In a +queue's time slice, a request will not be dispatched if the number of request +in the device exceeds this parameter. This parameter is used for synchronous +request. + +In case of storage with several disk, this setting can limit the parallel +processing of request. Therefore, increasing the value can imporve the +performace although this can cause the latency of some I/O to increase due +to more number of requests. + CFQ IOPS Mode for group scheduling =================================== Basic CFQ design is to provide priority based time slices. Higher priority diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 6518a55273e..e54ac1d5340 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory. Files denoted with a RO postfix are readonly and the RW postfix means read-write. +add_random (RW) +---------------- +This file allows to trun off the disk entropy contribution. Default +value of this file is '1'(on). + +discard_granularity (RO) +----------------------- +This shows the size of internal allocation of the device in bytes, if +reported by the device. A value of '0' means device does not support +the discard functionality. + +discard_max_bytes (RO) +---------------------- +Devices that support discard functionality may have internal limits on +the number of bytes that can be trimmed or unmapped in a single operation. +The discard_max_bytes parameter is set by the device driver to the maximum +number of bytes that can be discarded in a single operation. Discard +requests issued to the device must not exceed this limit. A discard_max_bytes +value of 0 means that the device does not support discard functionality. + +discard_zeroes_data (RO) +------------------------ +When read, this file will show if the discarded block are zeroed by the +device or not. If its value is '1' the blocks are zeroed otherwise not. + hw_sector_size (RO) ------------------- This is the hardware sector size of the device, in bytes. +iostats (RW) +------------- +This file is used to control (on/off) the iostats accounting of the +disk. + +logical_block_size (RO) +----------------------- +This is the logcal block size of the device, in bytes. + max_hw_sectors_kb (RO) ---------------------- This is the maximum number of kilobytes supported in a single data transfer. +max_integrity_segments (RO) +--------------------------- +When read, this file shows the max limit of integrity segments as +set by block layer which a hardware controller can handle. + max_sectors_kb (RW) ------------------- This is the maximum number of kilobytes that the block layer will allow for a filesystem request. Must be smaller than or equal to the maximum size allowed by the hardware. +max_segments (RO) +----------------- +Maximum number of segments of the device. + +max_segment_size (RO) +--------------------- +Maximum segment size of the device. + +minimum_io_size (RO) +-------------------- +This is the smallest preferred io size reported by the device. + nomerges (RW) ------------- This enables the user to disable the lookup logic involved with IO @@ -45,11 +96,24 @@ per-block-cgroup request pool. IOW, if there are N block cgroups, each request queue may have upto N request pools, each independently regulated by nr_requests. +optimal_io_size (RO) +-------------------- +This is the optimal io size reported by the device. + +physical_block_size (RO) +------------------------ +This is the physical block size of device, in bytes. + read_ahead_kb (RW) ------------------ Maximum number of kilobytes to read-ahead for filesystems on this block device. +rotational (RW) +--------------- +This file is used to stat if the device is of rotational type or +non-rotational type. + rq_affinity (RW) ---------------- If this option is '1', the block layer will migrate request completions to the diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa..1dd622546d0 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,<chip>-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 6d6e18fee9f..c5f9ae5dbd1 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -2144,6 +2144,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e..bd0cff3f808 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -154,5 +154,10 @@ #size-cells = <0>; ti,hwmods = "i2c3"; }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea..59d9789e550 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,8 +25,8 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d94704510..f8ca6fa8819 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -41,9 +41,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7e..d351b27d721 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -66,6 +66,7 @@ vcxio: regulator@8 { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; vusb: regulator@9 { @@ -74,10 +75,12 @@ v1v8: regulator@10 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; v2v1: regulator@11 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; clk32kg: regulator@12 { diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf..da6845493ca 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a..6321567d8ea 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -102,7 +102,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d..4e574c24581 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -42,6 +42,7 @@ #include <plat/backlight.h> #include <plat/fb.h> #include <plat/mfc.h> +#include <plat/hdmi.h> #include <mach/ohci.h> #include <mach/map.h> @@ -734,6 +735,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +787,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274..73f2bce097e 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -40,6 +40,7 @@ #include <plat/mfc.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/hdmi.h> #include <mach/map.h> #include <mach/ohci.h> @@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4c..d004d37ad9d 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o @@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e2..4233d9e3531 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,7 +152,7 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; @@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S index 7e49deb128a..7e49deb128a 100644 --- a/arch/arm/mach-imx/head-v7.S +++ b/arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1a..f8f7437c83b 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * @@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); + /* spin here until hardware takes it down */ + while (1) + ; } int platform_cpu_disable(unsigned int cpu) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a7..045b3f6a387 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -112,7 +112,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index a5717558ee8..a13299d758e 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb -dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-qnap-ts219.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb +dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index c4b64adcbfc..3226077735b 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, - IRQ_KIRKWOOD_GE00_ERR); + IRQ_KIRKWOOD_GE00_ERR, 1600); /* The interface forgets the MAC address assigned by u-boot if the clock is turned off, so claim the clk now. */ clk_prepare_enable(ge0); @@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, - IRQ_KIRKWOOD_GE01_ERR); + IRQ_KIRKWOOD_GE01_ERR, 1600); clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 4304f951937..7e8a5a2e1ec 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev) struct resource *res; int ret = 0; - if (!pdata && !pdata->pool_name) + if (!pdata || !pdata->pool_name) return -ENODEV; info = kzalloc(sizeof(*info), GFP_KERNEL); diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 62b53d710ef..a9bc84180d2 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -37,7 +37,7 @@ #define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4)) #define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4)) -static void __init __iomem *win_cfg_base(int win) +static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win) { /* * Find the control register base address for this window. diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index b4c53b846c9..3057f7d4329 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM, - IRQ_MV78XX0_GE_ERR); + IRQ_MV78XX0_GE_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } @@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM, - NO_IRQ); + NO_IRQ, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db025f77..fcd4e85c4dd 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -62,13 +62,14 @@ config ARCH_OMAP4 select PM_OPP if PM select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_CPU_SUSPEND if PM - select ARCH_NEEDS_CPU_IDLE_COUPLED + select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP config SOC_OMAP5 bool "TI OMAP5" select CPU_V7 select ARM_GIC select HAVE_SMP + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 74915295482..28214483aab 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ + OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index ef230a0eb5e..0d362e9f9cb 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -58,6 +58,7 @@ #include "hsmmc.h" #include "common-board-devices.h" +#define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 #define OMAP3_EVM_EHCI_SELECT 61 diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 14734746457..c1875862679 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, }; -/* - * ADS7846 driver maybe request a gpio according to the value - * of pdata->get_pendown_state, but we have done this. So set - * get_pendown_state to avoid twice gpio requesting. - */ -static int omap3_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, @@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = { .debounce_rep = 1, .gpio_pendown = -EINVAL, .keep_vref_on = 1, - .get_pendown_state = &omap3_get_pendown_state, }; static struct spi_board_info ads7846_spi_board_info __initdata = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 4c4ef6a6166..a0b4a42836a 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -4,7 +4,6 @@ #include "twl-common.h" #define NAND_BLOCK_SIZE SZ_128K -#define OMAP3_EVM_TS_GPIO 175 struct mtd_partition; struct ads7846_platform_data; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index ee05e193fc6..288bee6cbb7 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -238,8 +238,9 @@ int __init omap4_idle_init(void) for_each_cpu(cpu_id, cpu_online_mask) { dev = &per_cpu(omap4_idle_dev, cpu_id); dev->cpu = cpu_id; +#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED dev->coupled_cpus = *cpu_online_mask; - +#endif cpuidle_register_driver(&omap4_idle_driver); if (cpuidle_register_device(dev)) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 471e62a74a1..76f9b3c2f58 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -127,7 +127,6 @@ struct omap_mux_partition { * @gpio: GPIO number * @muxnames: available signal modes for a ball * @balls: available balls on the package - * @partition: mux partition */ struct omap_mux { u16 reg_offset; diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c index 2293ba27101..c95415da23c 100644 --- a/arch/arm/mach-omap2/opp4xxx_data.c +++ b/arch/arm/mach-omap2/opp4xxx_data.c @@ -94,7 +94,7 @@ int __init omap4_opp_init(void) { int r = -ENODEV; - if (!cpu_is_omap44xx()) + if (!cpu_is_omap443x()) return r; r = omap_init_opp_table(omap44xx_opp_def_list, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index e4fc88c65db..05bd8f02723 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -272,21 +272,16 @@ void omap_sram_idle(void) per_next_state = pwrdm_read_next_pwrst(per_pwrdm); core_next_state = pwrdm_read_next_pwrst(core_pwrdm); - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(mpu_pwrdm); - pwrdm_pre_transition(neon_pwrdm); - } + pwrdm_pre_transition(NULL); /* PER */ if (per_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(per_pwrdm); per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap2_gpio_prepare_for_idle(per_going_off); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { - pwrdm_pre_transition(core_pwrdm); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); @@ -339,20 +334,14 @@ void omap_sram_idle(void) omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK, OMAP3430_GR_MOD, OMAP3_PRM_VOLTCTRL_OFFSET); - pwrdm_post_transition(core_pwrdm); } omap3_intc_resume_idle(); + pwrdm_post_transition(NULL); + /* PER */ - if (per_next_state < PWRDM_POWER_ON) { + if (per_next_state < PWRDM_POWER_ON) omap2_gpio_resume_after_idle(); - pwrdm_post_transition(per_pwrdm); - } - - if (mpu_next_state < PWRDM_POWER_ON) { - pwrdm_post_transition(mpu_pwrdm); - pwrdm_post_transition(neon_pwrdm); - } } static void omap3_pm_idle(void) diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9f6b83d1b19..91e71d8f46f 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -56,9 +56,13 @@ ppa_por_params: * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET. * It returns to the caller for CPU INACTIVE and ON power states or in case * CPU failed to transition to targeted OFF/DORMANT state. + * + * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save + * stack frame and it expects the caller to take care of it. Hence the entire + * stack frame is saved to avoid possible stack corruption. */ ENTRY(omap4_finish_suspend) - stmfd sp!, {lr} + stmfd sp!, {r4-r12, lr} cmp r0, #0x0 beq do_WFI @ No lowpower state, jump to WFI @@ -226,7 +230,7 @@ scu_gp_clear: skip_scu_gp_clear: isb dsb - ldmfd sp!, {pc} + ldmfd sp!, {r4-r12, pc} ENDPROC(omap4_finish_suspend) /* diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba5..db5ff664237 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq; diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9148b229d0d..410291c6766 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM, - IRQ_ORION5X_ETH_ERR); + IRQ_ORION5X_ETH_ERR, + MV643XX_TX_CSUM_DEFAULT_LIMIT); } diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h index 454831b6603..ee99fd56c04 100644 --- a/arch/arm/mach-s3c24xx/include/mach/dma.h +++ b/arch/arm/mach-s3c24xx/include/mach/dma.h @@ -24,7 +24,8 @@ */ enum dma_ch { - DMACH_XD0, + DMACH_DT_PROP = -1, /* not yet supported, do not use */ + DMACH_XD0 = 0, DMACH_XD1, DMACH_SDI, DMACH_SPI0, diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c013bbf79ca..53d3d46dec1 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -41,7 +41,6 @@ config MACH_HREFV60 config MACH_SNOWBALL bool "U8500 Snowball platform" select MACH_MOP500 - select LEDS_GPIO help Include support for the snowball development platform. diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c index 99604803874..df15646036a 100644 --- a/arch/arm/mach-ux500/board-mop500-msp.c +++ b/arch/arm/mach-ux500/board-mop500-msp.c @@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent, return pdev; } -/* Platform device for ASoC U8500 machine */ -static struct platform_device snd_soc_u8500 = { - .name = "snd-soc-u8500", +/* Platform device for ASoC MOP500 machine */ +static struct platform_device snd_soc_mop500 = { + .name = "snd-soc-mop500", .id = 0, .dev = { .platform_data = NULL, @@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent) { struct platform_device *msp1; - pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__); - platform_device_register(&snd_soc_u8500); + pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__); + platform_device_register(&snd_soc_mop500); pr_info("Initialize MSP I2S-devices.\n"); db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 8674a890fd1..a534d8880de 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -797,6 +797,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); mop500_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, @@ -804,6 +805,8 @@ static void __init u8500_init_machine(void) mop500_uib_init(); + } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { + mop500_msp_init(parent); } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { /* * The HREFv60 board removed a GPIO expander and routed @@ -815,6 +818,7 @@ static void __init u8500_init_machine(void) ARRAY_SIZE(mop500_platform_devs)); hrefv60_sdi_init(parent); + mop500_msp_init(parent); i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 626ad8cad7a..938b50a3343 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer->reserved = 1; break; } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer request failed!\n", __func__); @@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) break; } } + spin_unlock_irqrestore(&dm_timer_lock, flags); if (timer) { ret = omap_dm_timer_prepare(timer); @@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id) timer = NULL; } } - spin_unlock_irqrestore(&dm_timer_lock, flags); if (!timer) pr_debug("%s: timer%d request failed!\n", __func__, id); @@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable); void omap_dm_timer_disable(struct omap_dm_timer *timer) { - pm_runtime_put(&timer->pdev->dev); + pm_runtime_put_sync(&timer->pdev->dev); } EXPORT_SYMBOL_GPL(omap_dm_timer_disable); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 68b180edcff..bb5d08a70db 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430) #define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \ cpu_is_omap16xx()) #define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \ - cpu_is_omap44xx() || soc_is_omap54xx()) + cpu_is_omap44xx() || soc_is_omap54xx() || \ + soc_is_am33xx()) /* Various silicon revisions for omap2 */ #define OMAP242X_CLASS 0x24200024 diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h index 045e320f106..324d31b1485 100644 --- a/arch/arm/plat-omap/include/plat/multi.h +++ b/arch/arm/plat-omap/include/plat/multi.h @@ -108,4 +108,13 @@ # endif #endif +#ifdef CONFIG_SOC_AM33XX +# ifdef OMAP_NAME +# undef MULTI_OMAP2 +# define MULTI_OMAP2 +# else +# define OMAP_NAME am33xx +# endif +#endif + #endif /* __PLAT_OMAP_MULTI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index b8d19a13678..7f7b112accc 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -110,7 +110,7 @@ static inline void flush(void) _DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT, \ AM33XXUART##p) -static inline void __arch_decomp_setup(unsigned long arch_id) +static inline void arch_decomp_setup(void) { int port = 0; @@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) } while (0); } -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - /* * nothing to do */ diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index d245a87dc01..b8b747a9d36 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = { void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge00_shared, orion_ge00_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge00_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge00_shared_data, orion_ge00_resources, irq, &orion_ge00_shared, eth_data, &orion_ge00); @@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = { void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err) + unsigned long irq_err, + unsigned int tx_csum_limit) { fill_resources(&orion_ge01_shared, orion_ge01_shared_resources, mapbase + 0x2000, SZ_16K - 1, irq_err); + orion_ge01_shared_data.tx_csum_limit = tx_csum_limit; ge_complete(&orion_ge01_shared_data, orion_ge01_resources, irq, &orion_ge01_shared, eth_data, &orion_ge01); diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h index e00fdb21360..ae2377ef63e 100644 --- a/arch/arm/plat-orion/include/plat/common.h +++ b/arch/arm/plat-orion/include/plat/common.h @@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase, void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, unsigned long irq, - unsigned long irq_err); + unsigned long irq_err, + unsigned int tx_csum_limit); void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data, unsigned long mapbase, diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 28f898f7538..db98e7021f0 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan) * when necessary. */ -int s3c2410_dma_enqueue(unsigned int channel, void *id, +int s3c2410_dma_enqueue(enum dma_ch channel, void *id, dma_addr_t data, int size) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 74e31ce3553..fc49f3dabd7 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,8 @@ #include <linux/platform_data/s3c-hsudc.h> #include <linux/platform_data/s3c-hsotg.h> +#include <media/s5p_hdmi.h> + #include <asm/irq.h> #include <asm/pmu.h> #include <asm/mach/arch.h> @@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) if (!pd) { pd = &default_i2c_data; - if (soc_is_exynos4210()) + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) pd->bus_num = 8; else if (soc_is_s5pv210()) pd->bus_num = 3; @@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s5p_device_i2c_hdmiphy); } + +struct s5p_hdmi_platform_data s5p_hdmi_def_platdata; + +void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus) +{ + struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata; + + if (soc_is_exynos4210() || + soc_is_exynos4212() || soc_is_exynos4412()) + pd->hdmiphy_bus = 8; + else if (soc_is_s5pv210()) + pd->hdmiphy_bus = 3; + else + pd->hdmiphy_bus = 0; + + pd->hdmiphy_info = hdmiphy_info; + pd->mhl_info = mhl_info; + pd->mhl_bus = mhl_bus; + + s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data), + &s5p_device_hdmi); +} + #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */ /* I2S */ diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h new file mode 100644 index 00000000000..331d046ac2c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/hdmi.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_HDMI_H +#define __PLAT_SAMSUNG_HDMI_H __FILE__ + +extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info, + struct i2c_board_info *mhl_info, int mhl_bus); + +#endif /* __PLAT_SAMSUNG_HDMI_H */ diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 64ab65f0fdb..15070284343 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot; #ifdef CONFIG_SAMSUNG_PM_DEBUG -struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; +static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) { diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 331d574df99..faf65286574 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -89,6 +89,7 @@ config ATH79 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT + select HAVE_CLK select IRQ_CPU select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 diff --git a/arch/mips/alchemy/board-mtx1.c b/arch/mips/alchemy/board-mtx1.c index 99969484c47..a124c251c0c 100644 --- a/arch/mips/alchemy/board-mtx1.c +++ b/arch/mips/alchemy/board-mtx1.c @@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert) * adapter on the mtx-1 "singleboard" variant. It triggers a custom * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals. */ + udelay(1); + if (assert && devsel != 0) /* Suppress signal to Cardbus */ alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c index 36e9570e7bc..b2a2311ec85 100644 --- a/arch/mips/ath79/dev-usb.c +++ b/arch/mips/ath79/dev-usb.c @@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void) ath79_ohci_resources[0].start = AR7240_OHCI_BASE; ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1; + ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB; + ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB; platform_device_register(&ath79_ohci_device); } diff --git a/arch/mips/ath79/gpio.c b/arch/mips/ath79/gpio.c index 29054f21183..48fe762d252 100644 --- a/arch/mips/ath79/gpio.c +++ b/arch/mips/ath79/gpio.c @@ -188,8 +188,10 @@ void __init ath79_gpio_init(void) if (soc_is_ar71xx()) ath79_gpio_count = AR71XX_GPIO_COUNT; - else if (soc_is_ar724x()) - ath79_gpio_count = AR724X_GPIO_COUNT; + else if (soc_is_ar7240()) + ath79_gpio_count = AR7240_GPIO_COUNT; + else if (soc_is_ar7241() || soc_is_ar7242()) + ath79_gpio_count = AR7241_GPIO_COUNT; else if (soc_is_ar913x()) ath79_gpio_count = AR913X_GPIO_COUNT; else if (soc_is_ar933x()) diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c index e39f73048d4..f1c9c3e2f67 100644 --- a/arch/mips/bcm63xx/dev-spi.c +++ b/arch/mips/bcm63xx/dev-spi.c @@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void) if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH; } if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) { spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1; spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE; + spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT; + spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH; } bcm63xx_spi_regs_init(); diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7fb1f222b8a..274cd4fad30 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -61,6 +61,12 @@ static void octeon_irq_set_ciu_mapping(int irq, int line, int bit, octeon_irq_ciu_to_irq[line][bit] = irq; } +static void octeon_irq_force_ciu_mapping(struct irq_domain *domain, + int irq, int line, int bit) +{ + irq_domain_associate(domain, irq, line << 6 | bit); +} + static int octeon_coreid_for_cpu(int cpu) { #ifdef CONFIG_SMP @@ -183,19 +189,9 @@ static void __init octeon_irq_init_core(void) mutex_init(&cd->core_irq_mutex); irq = OCTEON_IRQ_SW0 + i; - switch (irq) { - case OCTEON_IRQ_TIMER: - case OCTEON_IRQ_SW0: - case OCTEON_IRQ_SW1: - case OCTEON_IRQ_5: - case OCTEON_IRQ_PERF: - irq_set_chip_data(irq, cd); - irq_set_chip_and_handler(irq, &octeon_irq_chip_core, - handle_percpu_irq); - break; - default: - break; - } + irq_set_chip_data(irq, cd); + irq_set_chip_and_handler(irq, &octeon_irq_chip_core, + handle_percpu_irq); } } @@ -890,7 +886,6 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, unsigned int type; unsigned int pin; unsigned int trigger; - struct octeon_irq_gpio_domain_data *gpiod; if (d->of_node != node) return -EINVAL; @@ -925,8 +920,7 @@ static int octeon_irq_gpio_xlat(struct irq_domain *d, break; } *out_type = type; - gpiod = d->host_data; - *out_hwirq = gpiod->base_hwirq + pin; + *out_hwirq = pin; return 0; } @@ -996,19 +990,21 @@ static int octeon_irq_ciu_map(struct irq_domain *d, static int octeon_irq_gpio_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hw) { - unsigned int line = hw >> 6; - unsigned int bit = hw & 63; + struct octeon_irq_gpio_domain_data *gpiod = d->host_data; + unsigned int line, bit; if (!octeon_irq_virq_in_range(virq)) return -EINVAL; + hw += gpiod->base_hwirq; + line = hw >> 6; + bit = hw & 63; if (line > 1 || octeon_irq_ciu_to_irq[line][bit] != 0) return -EINVAL; octeon_irq_set_ciu_mapping(virq, line, bit, octeon_irq_gpio_chip, octeon_irq_handle_gpio); - return 0; } @@ -1149,6 +1145,7 @@ static void __init octeon_irq_init_ciu(void) struct irq_chip *chip_wd; struct device_node *gpio_node; struct device_node *ciu_node; + struct irq_domain *ciu_domain = NULL; octeon_irq_init_ciu_percpu(); octeon_irq_setup_secondary = octeon_irq_setup_secondary_ciu; @@ -1177,31 +1174,6 @@ static void __init octeon_irq_init_ciu(void) /* Mips internal */ octeon_irq_init_core(); - /* CIU_0 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WORKQ0, 0, i + 0, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); - - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_INT0, 0, i + 36, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_PCI_MSI0, 0, i + 40, chip, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_RML, 0, 46, chip, handle_level_irq); - for (i = 0; i < 4; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_TIMER0, 0, i + 52, chip, handle_edge_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB0, 0, 56, chip, handle_level_irq); - octeon_irq_set_ciu_mapping(OCTEON_IRQ_BOOTDMA, 0, 63, chip, handle_level_irq); - - /* CIU_1 */ - for (i = 0; i < 16; i++) - octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); - - octeon_irq_set_ciu_mapping(OCTEON_IRQ_USB1, 1, 17, chip, handle_level_irq); - gpio_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-gpio"); if (gpio_node) { struct octeon_irq_gpio_domain_data *gpiod; @@ -1219,10 +1191,35 @@ static void __init octeon_irq_init_ciu(void) ciu_node = of_find_compatible_node(NULL, NULL, "cavium,octeon-3860-ciu"); if (ciu_node) { - irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); + ciu_domain = irq_domain_add_tree(ciu_node, &octeon_irq_domain_ciu_ops, NULL); of_node_put(ciu_node); } else - pr_warn("Cannot find device node for cavium,octeon-3860-ciu.\n"); + panic("Cannot find device node for cavium,octeon-3860-ciu."); + + /* CIU_0 */ + for (i = 0; i < 16; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_WORKQ0, 0, i + 0); + + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX0, 0, 32, chip_mbox, handle_percpu_irq); + octeon_irq_set_ciu_mapping(OCTEON_IRQ_MBOX1, 0, 33, chip_mbox, handle_percpu_irq); + + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_INT0, 0, i + 36); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_PCI_MSI0, 0, i + 40); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_RML, 0, 46); + for (i = 0; i < 4; i++) + octeon_irq_force_ciu_mapping(ciu_domain, i + OCTEON_IRQ_TIMER0, 0, i + 52); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB0, 0, 56); + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_BOOTDMA, 0, 63); + + /* CIU_1 */ + for (i = 0; i < 16; i++) + octeon_irq_set_ciu_mapping(i + OCTEON_IRQ_WDOG0, 1, i + 0, chip_wd, handle_level_irq); + + octeon_irq_force_ciu_mapping(ciu_domain, OCTEON_IRQ_USB1, 1, 17); /* Enable the CIU lines */ set_c0_status(STATUSF_IP3 | STATUSF_IP2); diff --git a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h index 1caa78ad06d..dde504477fa 100644 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h @@ -393,7 +393,8 @@ #define AR71XX_GPIO_REG_FUNC 0x28 #define AR71XX_GPIO_COUNT 16 -#define AR724X_GPIO_COUNT 18 +#define AR7240_GPIO_COUNT 18 +#define AR7241_GPIO_COUNT 20 #define AR913X_GPIO_COUNT 22 #define AR933X_GPIO_COUNT 30 #define AR934X_GPIO_COUNT 23 diff --git a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h index 4476fa03bf3..6ddae926bf7 100644 --- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h @@ -42,7 +42,6 @@ #define cpu_has_mips64r1 0 #define cpu_has_mips64r2 0 -#define cpu_has_dsp 0 #define cpu_has_mipsmt 0 #define cpu_has_64bits 0 diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h index 7d98dbe5d4b..c9bae136260 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h @@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void); struct bcm63xx_spi_pdata { unsigned int fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; int bus_num; int num_chipselect; u32 speed_hz; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 4ccc2a748af..61f2a2a5099 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -1054,7 +1054,8 @@ #define SPI_6338_FILL_BYTE 0x07 #define SPI_6338_MSG_TAIL 0x09 #define SPI_6338_RX_TAIL 0x0b -#define SPI_6338_MSG_CTL 0x40 +#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6338_MSG_CTL_WIDTH 8 #define SPI_6338_MSG_DATA 0x41 #define SPI_6338_MSG_DATA_SIZE 0x3f #define SPI_6338_RX_DATA 0x80 @@ -1070,7 +1071,8 @@ #define SPI_6348_FILL_BYTE 0x07 #define SPI_6348_MSG_TAIL 0x09 #define SPI_6348_RX_TAIL 0x0b -#define SPI_6348_MSG_CTL 0x40 +#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */ +#define SPI_6348_MSG_CTL_WIDTH 8 #define SPI_6348_MSG_DATA 0x41 #define SPI_6348_MSG_DATA_SIZE 0x3f #define SPI_6348_RX_DATA 0x80 @@ -1078,6 +1080,7 @@ /* BCM 6358 SPI core */ #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6358_MSG_CTL_WIDTH 16 #define SPI_6358_MSG_DATA 0x02 #define SPI_6358_MSG_DATA_SIZE 0x21e #define SPI_6358_RX_DATA 0x400 @@ -1094,6 +1097,7 @@ /* BCM 6358 SPI core */ #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */ +#define SPI_6368_MSG_CTL_WIDTH 16 #define SPI_6368_MSG_DATA 0x02 #define SPI_6368_MSG_DATA_SIZE 0x21e #define SPI_6368_RX_DATA 0x400 @@ -1115,7 +1119,10 @@ #define SPI_HD_W 0x01 #define SPI_HD_R 0x02 #define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 +#define SPI_6338_MSG_TYPE_SHIFT 6 +#define SPI_6348_MSG_TYPE_SHIFT 6 +#define SPI_6358_MSG_TYPE_SHIFT 14 +#define SPI_6368_MSG_TYPE_SHIFT 14 /* Command */ #define SPI_CMD_NOOP 0x00 diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h index 418992042f6..c22a3078bf1 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/irq.h +++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h @@ -21,14 +21,10 @@ enum octeon_irq { OCTEON_IRQ_TIMER, /* sources in CIU_INTX_EN0 */ OCTEON_IRQ_WORKQ0, - OCTEON_IRQ_GPIO0 = OCTEON_IRQ_WORKQ0 + 16, - OCTEON_IRQ_WDOG0 = OCTEON_IRQ_GPIO0 + 16, + OCTEON_IRQ_WDOG0 = OCTEON_IRQ_WORKQ0 + 16, OCTEON_IRQ_WDOG15 = OCTEON_IRQ_WDOG0 + 15, OCTEON_IRQ_MBOX0 = OCTEON_IRQ_WDOG0 + 16, OCTEON_IRQ_MBOX1, - OCTEON_IRQ_UART0, - OCTEON_IRQ_UART1, - OCTEON_IRQ_UART2, OCTEON_IRQ_PCI_INT0, OCTEON_IRQ_PCI_INT1, OCTEON_IRQ_PCI_INT2, @@ -38,8 +34,6 @@ enum octeon_irq { OCTEON_IRQ_PCI_MSI2, OCTEON_IRQ_PCI_MSI3, - OCTEON_IRQ_TWSI, - OCTEON_IRQ_TWSI2, OCTEON_IRQ_RML, OCTEON_IRQ_TIMER0, OCTEON_IRQ_TIMER1, @@ -47,8 +41,6 @@ enum octeon_irq { OCTEON_IRQ_TIMER3, OCTEON_IRQ_USB0, OCTEON_IRQ_USB1, - OCTEON_IRQ_MII0, - OCTEON_IRQ_MII1, OCTEON_IRQ_BOOTDMA, #ifndef CONFIG_PCI_MSI OCTEON_IRQ_LAST = 127 diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h index 7531ecd654d..dca8bce8c7a 100644 --- a/arch/mips/include/asm/module.h +++ b/arch/mips/include/asm/module.h @@ -10,6 +10,7 @@ struct mod_arch_specific { struct list_head dbe_list; const struct exception_table_entry *dbe_start; const struct exception_table_entry *dbe_end; + struct mips_hi16 *r_mips_hi16_list; }; typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */ diff --git a/arch/mips/include/asm/r4k-timer.h b/arch/mips/include/asm/r4k-timer.h index a37d12b3b61..afe9e0e03fe 100644 --- a/arch/mips/include/asm/r4k-timer.h +++ b/arch/mips/include/asm/r4k-timer.h @@ -12,16 +12,16 @@ #ifdef CONFIG_SYNC_R4K -extern void synchronise_count_master(void); -extern void synchronise_count_slave(void); +extern void synchronise_count_master(int cpu); +extern void synchronise_count_slave(int cpu); #else -static inline void synchronise_count_master(void) +static inline void synchronise_count_master(int cpu) { } -static inline void synchronise_count_slave(void) +static inline void synchronise_count_slave(int cpu) { } diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c index a5066b1c3de..4f8c3cba8c0 100644 --- a/arch/mips/kernel/module.c +++ b/arch/mips/kernel/module.c @@ -39,8 +39,6 @@ struct mips_hi16 { Elf_Addr value; }; -static struct mips_hi16 *mips_hi16_list; - static LIST_HEAD(dbe_list); static DEFINE_SPINLOCK(dbe_lock); @@ -128,8 +126,8 @@ static int apply_r_mips_hi16_rel(struct module *me, u32 *location, Elf_Addr v) n->addr = (Elf_Addr *)location; n->value = v; - n->next = mips_hi16_list; - mips_hi16_list = n; + n->next = me->arch.r_mips_hi16_list; + me->arch.r_mips_hi16_list = n; return 0; } @@ -142,18 +140,28 @@ static int apply_r_mips_hi16_rela(struct module *me, u32 *location, Elf_Addr v) return 0; } +static void free_relocation_chain(struct mips_hi16 *l) +{ + struct mips_hi16 *next; + + while (l) { + next = l->next; + kfree(l); + l = next; + } +} + static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) { unsigned long insnlo = *location; + struct mips_hi16 *l; Elf_Addr val, vallo; /* Sign extend the addend we extract from the lo insn. */ vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; - if (mips_hi16_list != NULL) { - struct mips_hi16 *l; - - l = mips_hi16_list; + if (me->arch.r_mips_hi16_list != NULL) { + l = me->arch.r_mips_hi16_list; while (l != NULL) { struct mips_hi16 *next; unsigned long insn; @@ -188,7 +196,7 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) l = next; } - mips_hi16_list = NULL; + me->arch.r_mips_hi16_list = NULL; } /* @@ -201,6 +209,9 @@ static int apply_r_mips_lo16_rel(struct module *me, u32 *location, Elf_Addr v) return 0; out_danger: + free_relocation_chain(l); + me->arch.r_mips_hi16_list = NULL; + pr_err("module %s: dangerous R_MIPS_LO16 REL relocation\n", me->name); return -ENOEXEC; @@ -273,6 +284,7 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); + me->arch.r_mips_hi16_list = NULL; for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr @@ -296,6 +308,19 @@ int apply_relocate(Elf_Shdr *sechdrs, const char *strtab, return res; } + /* + * Normally the hi16 list should be deallocated at this point. A + * malformed binary however could contain a series of R_MIPS_HI16 + * relocations not followed by a R_MIPS_LO16 relocation. In that + * case, free up the list and return an error. + */ + if (me->arch.r_mips_hi16_list) { + free_relocation_chain(me->arch.r_mips_hi16_list); + me->arch.r_mips_hi16_list = NULL; + + return -ENOEXEC; + } + return 0; } diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 31637d8c873..9005bf9fb85 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -130,7 +130,7 @@ asmlinkage __cpuinit void start_secondary(void) cpu_set(cpu, cpu_callin_map); - synchronise_count_slave(); + synchronise_count_slave(cpu); /* * irq will be enabled in ->smp_finish(), enabling it too early @@ -173,7 +173,6 @@ void smp_send_stop(void) void __init smp_cpus_done(unsigned int max_cpus) { mp_ops->cpus_done(); - synchronise_count_master(); } /* called from main before smp_init() */ @@ -206,6 +205,7 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); + synchronise_count_master(cpu); return 0; } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 842d55e411f..7f1eca3858d 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -28,12 +28,11 @@ static atomic_t __cpuinitdata count_reference = ATOMIC_INIT(0); #define COUNTON 100 #define NR_LOOPS 5 -void __cpuinit synchronise_count_master(void) +void __cpuinit synchronise_count_master(int cpu) { int i; unsigned long flags; unsigned int initcount; - int nslaves; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -43,8 +42,7 @@ void __cpuinit synchronise_count_master(void) return; #endif - printk(KERN_INFO "Synchronize counters across %u CPUs: ", - num_online_cpus()); + printk(KERN_INFO "Synchronize counters for CPU %u: ", cpu); local_irq_save(flags); @@ -52,7 +50,7 @@ void __cpuinit synchronise_count_master(void) * Notify the slaves that it's time to start */ atomic_set(&count_reference, read_c0_count()); - atomic_set(&count_start_flag, 1); + atomic_set(&count_start_flag, cpu); smp_wmb(); /* Count will be initialised to current timer for all CPU's */ @@ -69,10 +67,9 @@ void __cpuinit synchronise_count_master(void) * two CPUs. */ - nslaves = num_online_cpus()-1; for (i = 0; i < NR_LOOPS; i++) { - /* slaves loop on '!= ncpus' */ - while (atomic_read(&count_count_start) != nslaves) + /* slaves loop on '!= 2' */ + while (atomic_read(&count_count_start) != 1) mb(); atomic_set(&count_count_stop, 0); smp_wmb(); @@ -89,7 +86,7 @@ void __cpuinit synchronise_count_master(void) /* * Wait for all slaves to leave the synchronization point: */ - while (atomic_read(&count_count_stop) != nslaves) + while (atomic_read(&count_count_stop) != 1) mb(); atomic_set(&count_count_start, 0); smp_wmb(); @@ -97,6 +94,7 @@ void __cpuinit synchronise_count_master(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); + atomic_set(&count_start_flag, 0); local_irq_restore(flags); @@ -108,11 +106,10 @@ void __cpuinit synchronise_count_master(void) printk("done.\n"); } -void __cpuinit synchronise_count_slave(void) +void __cpuinit synchronise_count_slave(int cpu) { int i; unsigned int initcount; - int ncpus; #ifdef CONFIG_MIPS_MT_SMTC /* @@ -127,16 +124,15 @@ void __cpuinit synchronise_count_slave(void) * so we first wait for the master to say everyone is ready */ - while (!atomic_read(&count_start_flag)) + while (atomic_read(&count_start_flag) != cpu) mb(); /* Count will be initialised to next expire for all CPU's */ initcount = atomic_read(&count_reference); - ncpus = num_online_cpus(); for (i = 0; i < NR_LOOPS; i++) { atomic_inc(&count_count_start); - while (atomic_read(&count_count_start) != ncpus) + while (atomic_read(&count_count_start) != 2) mb(); /* @@ -146,7 +142,7 @@ void __cpuinit synchronise_count_slave(void) write_c0_count(initcount); atomic_inc(&count_count_stop); - while (atomic_read(&count_count_stop) != ncpus) + while (atomic_read(&count_count_stop) != 2) mb(); } /* Arrange for an interrupt in a short while */ diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index 284dea54faf..2147cb34e70 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -252,16 +252,3 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } - -/* Enable PCI 2.1 compatibility in PIIX4 */ -static void __devinit quirk_dlcsetup(struct pci_dev *dev) -{ - u8 odlc, ndlc; - (void) pci_read_config_byte(dev, 0x82, &odlc); - /* Enable passive releases and delayed transaction */ - ndlc = odlc | 7; - (void) pci_write_config_byte(dev, 0x82, ndlc); -} - -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - quirk_dlcsetup); diff --git a/arch/mips/pci/pci-ar724x.c b/arch/mips/pci/pci-ar724x.c index 414a7459858..86d77a66645 100644 --- a/arch/mips/pci/pci-ar724x.c +++ b/arch/mips/pci/pci-ar724x.c @@ -23,9 +23,12 @@ #define AR724X_PCI_MEM_BASE 0x10000000 #define AR724X_PCI_MEM_SIZE 0x08000000 +#define AR724X_PCI_REG_RESET 0x18 #define AR724X_PCI_REG_INT_STATUS 0x4c #define AR724X_PCI_REG_INT_MASK 0x50 +#define AR724X_PCI_RESET_LINK_UP BIT(0) + #define AR724X_PCI_INT_DEV0 BIT(14) #define AR724X_PCI_IRQ_COUNT 1 @@ -38,6 +41,15 @@ static void __iomem *ar724x_pci_ctrl_base; static u32 ar724x_pci_bar0_value; static bool ar724x_pci_bar0_is_cached; +static bool ar724x_pci_link_up; + +static inline bool ar724x_pci_check_link(void) +{ + u32 reset; + + reset = __raw_readl(ar724x_pci_ctrl_base + AR724X_PCI_REG_RESET); + return reset & AR724X_PCI_RESET_LINK_UP; +} static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, uint32_t *value) @@ -46,6 +58,9 @@ static int ar724x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, void __iomem *base; u32 data; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -96,6 +111,9 @@ static int ar724x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, u32 data; int s; + if (!ar724x_pci_link_up) + return PCIBIOS_DEVICE_NOT_FOUND; + if (devfn) return PCIBIOS_DEVICE_NOT_FOUND; @@ -280,6 +298,10 @@ int __init ar724x_pcibios_init(int irq) if (ar724x_pci_ctrl_base == NULL) goto err_unmap_devcfg; + ar724x_pci_link_up = ar724x_pci_check_link(); + if (!ar724x_pci_link_up) + pr_warn("ar724x: PCIe link is down\n"); + ar724x_pci_irq_init(irq); register_pci_controller(&ar724x_pci_controller); diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 8d35d2c1f69..4f9c9f682ec 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -345,6 +345,13 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.0-0.dtsi" }; diff --git a/arch/powerpc/configs/85xx/p1023rds_defconfig b/arch/powerpc/configs/85xx/p1023rds_defconfig index f4337bacd0e..26e541c4662 100644 --- a/arch/powerpc/configs/85xx/p1023rds_defconfig +++ b/arch/powerpc/configs/85xx/p1023rds_defconfig @@ -6,28 +6,27 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_EMBEDDED=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P1023_RDS=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_CPM2=y -CONFIG_GPIO_MPC8XXX=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y @@ -63,11 +62,11 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -80,15 +79,14 @@ CONFIG_SATA_FSL=y CONFIG_SATA_SIL24=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_FS_ENET=y +CONFIG_FSL_PQ_MDIO=y +CONFIG_E1000E=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_FS_ENET=y -CONFIG_E1000E=y -CONFIG_FSL_PQ_MDIO=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -98,16 +96,15 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_QE=m -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CPM=m CONFIG_I2C_MPC=y +CONFIG_GPIO_MPC8XXX=y # CONFIG_HWMON is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_SOUND=y @@ -123,7 +120,6 @@ CONFIG_DMADEVICES=y CONFIG_FSL_DMA=y # CONFIG_NET_DMA is not set CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set @@ -150,22 +146,15 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_FRAME_WARN=8092 CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig index cbb98c1234f..8b3d57c1ebe 100644 --- a/arch/powerpc/configs/corenet32_smp_defconfig +++ b/arch/powerpc/configs/corenet32_smp_defconfig @@ -6,8 +6,8 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y -CONFIG_RCU_TRACE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -21,23 +21,22 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_P2041_RDB=y CONFIG_P3041_DS=y CONFIG_P4080_DS=y CONFIG_P5020_DS=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_MISC=m CONFIG_KEXEC=y CONFIG_IRQ_ALL_CPUS=y CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_FSL_LBC=y CONFIG_PCI=y CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y # CONFIG_PCIEASPM is not set +CONFIG_PCI_MSI=y CONFIG_RAPIDIO=y CONFIG_FSL_RIO=y CONFIG_NET=y @@ -70,6 +69,7 @@ CONFIG_INET_IPCOMP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y @@ -77,17 +77,14 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_FSL_IFC=y CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_FSL_IFC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -115,11 +112,9 @@ CONFIG_SERIO_LIBPS2=y CONFIG_PPC_EPAPR_HV_BYTECHAN=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -132,7 +127,6 @@ CONFIG_SPI_FSL_ESPI=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_USB_HID=m CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -142,8 +136,6 @@ CONFIG_USB_OHCI_HCD_PPC_OF_LE=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_OF=y -CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y @@ -170,19 +162,16 @@ CONFIG_HUGETLBFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=m CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_RCU_TRACE=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_MD4=y diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig index dd89de8b0b7..0516e22ca3d 100644 --- a/arch/powerpc/configs/corenet64_smp_defconfig +++ b/arch/powerpc/configs/corenet64_smp_defconfig @@ -56,6 +56,7 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 15130066e5e..07b7f2af2dc 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,8 +1,10 @@ +CONFIG_PPC64=y +CONFIG_ALTIVEC=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_BLK_DEV_INITRD=y @@ -13,15 +15,16 @@ CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_SMP=y -CONFIG_NR_CPUS=4 -CONFIG_KEXEC=y -# CONFIG_RELOCATABLE is not set +# CONFIG_PPC_PSERIES is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_PMAC64=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_MIGRATION is not set CONFIG_PCI_MSI=y CONFIG_NET=y CONFIG_PACKET=y @@ -49,6 +52,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CONNTRACK_IPV4=m CONFIG_IP_NF_QUEUE=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y @@ -56,6 +60,8 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_CDROM_PKTCDVD=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y @@ -79,24 +85,33 @@ CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m CONFIG_DM_ZERO=m -CONFIG_MACINTOSH_DRIVERS=y +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y +CONFIG_WINDFARM_PM112=y +CONFIG_WINDFARM_PM121=y CONFIG_NETDEVICES=y -CONFIG_BONDING=m CONFIG_DUMMY=m -CONFIG_MII=y +CONFIG_BONDING=m CONFIG_TUN=m +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SUNGEM=y CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y -CONFIG_TIGON3=y CONFIG_E1000=y -CONFIG_SUNGEM=y -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPPOE=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m +CONFIG_TIGON3=y CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m @@ -106,24 +121,36 @@ CONFIG_USB_USBNET=m # CONFIG_USB_NET_NET1080 is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set +CONFIG_PPP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPPOE=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set # CONFIG_MOUSE_PS2 is not set +# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y CONFIG_RAW_DRIVER=y CONFIG_I2C_CHARDEV=y # CONFIG_HWMON is not set -CONFIG_AGP=y -CONFIG_DRM=y -CONFIG_DRM_NOUVEAU=y +CONFIG_AGP=m +CONFIG_AGP_UNINORTH=m CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_TILEBLITTING=y +CONFIG_FB_OF=y +CONFIG_FB_NVIDIA=y +CONFIG_FB_NVIDIA_I2C=y CONFIG_FB_RADEON=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m @@ -131,7 +158,15 @@ CONFIG_SND_SEQUENCER=m CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_POWERMAC=m +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m CONFIG_SND_USB_AUDIO=m +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y CONFIG_HID_GYRATION=y CONFIG_LOGITECH_FF=y CONFIG_HID_PANTHERLORD=y @@ -139,12 +174,13 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y CONFIG_USB=y +CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y @@ -208,6 +244,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y +CONFIG_INOTIFY=y +CONFIG_AUTOFS_FS=m CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y @@ -221,12 +259,14 @@ CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFSD=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_1250=y CONFIG_NLS_CODEPAGE_1251=y @@ -234,23 +274,29 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=m CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MUTEXES=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_STRICT_DEVMEM=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_BOOTX_TEXT=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m @@ -260,6 +306,3 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set -# CONFIG_VIRTUALIZATION is not set -CONFIG_CRC_T10DIF=y -CONFIG_LIBCRC32C=m diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 5aac9a8bc53..9352e4430c3 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -2,12 +2,12 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_CHRP is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y @@ -25,7 +25,6 @@ CONFIG_ASP834x=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_MATH_EMULATION=y -CONFIG_SPARSE_IRQ=y CONFIG_PCI=y CONFIG_NET=y CONFIG_PACKET=y @@ -42,10 +41,9 @@ CONFIG_INET_ESP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y # CONFIG_FW_LOADER is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -64,15 +62,14 @@ CONFIG_ATA=y CONFIG_SATA_FSL=y CONFIG_SATA_SIL=y CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_VITESSE_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_FIXED_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_GIANFAR=y -CONFIG_UCC_GETH=y CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set @@ -112,17 +109,12 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_PROC_KCORE=y CONFIG_TMPFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y CONFIG_CRC_T10DIF=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 03ee911c457..8b5bda27d24 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -5,7 +5,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -17,6 +19,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -40,8 +44,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_FORCE_MAX_ZONEORDER=12 @@ -74,36 +76,25 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -115,6 +106,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_FSL=y CONFIG_PATA_ALI=y +CONFIG_PATA_VIA=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_FS_ENET=y @@ -134,7 +126,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -183,7 +174,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -229,18 +219,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index fdfa84dc908..b0974e7e98a 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -7,7 +7,9 @@ CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_AUDIT=y -CONFIG_SPARSE_IRQ=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -19,6 +21,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y CONFIG_MPC8540_ADS=y CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y @@ -42,8 +46,6 @@ CONFIG_SBC8548=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y CONFIG_HIGHMEM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IRQ_ALL_CPUS=y @@ -77,36 +79,25 @@ CONFIG_INET_ESP=y CONFIG_IPV6=y CONFIG_IP_SCTP=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y CONFIG_FTL=y -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_MTD_NAND_FSL_IFC=y -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_M25P80=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_LEGACY=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y @@ -137,7 +128,6 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y @@ -186,7 +176,6 @@ CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_FSL=y @@ -232,18 +221,13 @@ CONFIG_QNX4FS_FS=m CONFIG_SYSV_FS=m CONFIG_UFS_FS=m CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NFSD=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y CONFIG_CRC_T10DIF=y CONFIG_DEBUG_FS=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_IRQ_DOMAIN_DEBUG=y CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 50d82c8a037..b3c083de17a 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -553,9 +553,7 @@ static inline int cpu_has_feature(unsigned long feature) & feature); } -#ifdef CONFIG_HAVE_HW_BREAKPOINT #define HBP_NUM 1 -#endif /* CONFIG_HAVE_HW_BREAKPOINT */ #endif /* !__ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 50ea12fd7bf..a8bf5c673a3 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #include <asm/kvm_asm.h> #include <asm/processor.h> #include <asm/page.h> +#include <asm/cacheflush.h> #define KVM_MAX_VCPUS NR_CPUS #define KVM_MAX_VCORES NR_CPUS diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 0124937a23b..e006f0bdea9 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -219,4 +219,16 @@ void kvmppc_claim_lpid(long lpid); void kvmppc_free_lpid(long lpid); void kvmppc_init_lpid(unsigned long nr_lpids); +static inline void kvmppc_mmu_flush_icache(pfn_t pfn) +{ + /* Clear i-cache for new pages */ + struct page *page; + page = pfn_to_page(pfn); + if (!test_bit(PG_arch_1, &page->flags)) { + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } +} + + #endif /* __POWERPC_KVM_PPC_H__ */ diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h index 326d33ca55c..d4f471fb103 100644 --- a/arch/powerpc/include/asm/mpic_msgr.h +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -14,6 +14,7 @@ #include <linux/types.h> #include <linux/spinlock.h> #include <asm/smp.h> +#include <asm/io.h> struct mpic_msgr { u32 __iomem *base; diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c index 2d7bb8ced13..e4897523de4 100644 --- a/arch/powerpc/kernel/dma-iommu.c +++ b/arch/powerpc/kernel/dma-iommu.c @@ -83,11 +83,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask) return 0; } - if ((tbl->it_offset + tbl->it_size) > (mask >> IOMMU_PAGE_SHIFT)) { - dev_info(dev, "Warning: IOMMU window too big for device mask\n"); - dev_info(dev, "mask: 0x%08llx, table end: 0x%08lx\n", - mask, (tbl->it_offset + tbl->it_size) << - IOMMU_PAGE_SHIFT); + if (tbl->it_offset > (mask >> IOMMU_PAGE_SHIFT)) { + dev_info(dev, "Warning: IOMMU offset too big for device mask\n"); + dev_info(dev, "mask: 0x%08llx, table offset: 0x%08lx\n", + mask, tbl->it_offset << IOMMU_PAGE_SHIFT); return 0; } else return 1; diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c index f3a82dde61d..956a4c496de 100644 --- a/arch/powerpc/kernel/hw_breakpoint.c +++ b/arch/powerpc/kernel/hw_breakpoint.c @@ -253,7 +253,7 @@ int __kprobes hw_breakpoint_handler(struct die_args *args) /* Do not emulate user-space instructions, instead single-step them */ if (user_mode(regs)) { - bp->ctx->task->thread.last_hit_ubp = bp; + current->thread.last_hit_ubp = bp; regs->msr |= MSR_SE; goto out; } diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index 782bd0a3c2f..c470a40b29f 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -25,6 +25,7 @@ #include <asm/processor.h> #include <asm/machdep.h> #include <asm/debug.h> +#include <linux/slab.h> /* * This table contains the mapping between PowerPC hardware trap types, and @@ -101,6 +102,21 @@ static int computeSignal(unsigned int tt) return SIGHUP; /* default for things we don't know about */ } +/** + * + * kgdb_skipexception - Bail out of KGDB when we've been triggered. + * @exception: Exception vector number + * @regs: Current &struct pt_regs. + * + * On some architectures we need to skip a breakpoint exception when + * it occurs after a breakpoint has been removed. + * + */ +int kgdb_skipexception(int exception, struct pt_regs *regs) +{ + return kgdb_isremovedbreak(regs->nip); +} + static int kgdb_call_nmi_hook(struct pt_regs *regs) { kgdb_nmicallback(raw_smp_processor_id(), regs); @@ -138,6 +154,8 @@ static int kgdb_handle_breakpoint(struct pt_regs *regs) static int kgdb_singlestep(struct pt_regs *regs) { struct thread_info *thread_info, *exception_thread_info; + struct thread_info *backup_current_thread_info = \ + (struct thread_info *)kmalloc(sizeof(struct thread_info), GFP_KERNEL); if (user_mode(regs)) return 0; @@ -155,13 +173,17 @@ static int kgdb_singlestep(struct pt_regs *regs) thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1)); exception_thread_info = current_thread_info(); - if (thread_info != exception_thread_info) + if (thread_info != exception_thread_info) { + /* Save the original current_thread_info. */ + memcpy(backup_current_thread_info, exception_thread_info, sizeof *thread_info); memcpy(exception_thread_info, thread_info, sizeof *thread_info); + } kgdb_handle_exception(0, SIGTRAP, 0, regs); if (thread_info != exception_thread_info) - memcpy(thread_info, exception_thread_info, sizeof *thread_info); + /* Restore current_thread_info lastly. */ + memcpy(exception_thread_info, backup_current_thread_info, sizeof *thread_info); return 1; } @@ -410,7 +432,6 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, #else linux_regs->msr |= MSR_SE; #endif - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index f2496f2faec..4e3cc47f26b 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -107,11 +107,11 @@ long ppc64_personality(unsigned long personality) long ret; if (personality(current->personality) == PER_LINUX32 - && personality == PER_LINUX) - personality = PER_LINUX32; + && personality(personality) == PER_LINUX) + personality = (personality & ~PER_MASK) | PER_LINUX32; ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + if (personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } #endif diff --git a/arch/powerpc/kvm/book3s_32_mmu_host.c b/arch/powerpc/kvm/book3s_32_mmu_host.c index f922c29bb23..837f13e7b6b 100644 --- a/arch/powerpc/kvm/book3s_32_mmu_host.c +++ b/arch/powerpc/kvm/book3s_32_mmu_host.c @@ -211,6 +211,9 @@ next_pteg: pteg1 |= PP_RWRX; } + if (orig_pte->may_execute) + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); + local_irq_disable(); if (pteg[rr]) { diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c index 10fc8ec9d2a..0688b6b3958 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -126,6 +126,8 @@ int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) if (!orig_pte->may_execute) rflags |= HPTE_R_N; + else + kvmppc_mmu_flush_icache(hpaddr >> PAGE_SHIFT); hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 5a84c8d3d04..44b72feaff7 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1421,13 +1421,13 @@ _GLOBAL(kvmppc_h_cede) sync /* order setting ceded vs. testing prodded */ lbz r5,VCPU_PRODDED(r3) cmpwi r5,0 - bne 1f + bne kvm_cede_prodded li r0,0 /* set trap to 0 to say hcall is handled */ stw r0,VCPU_TRAP(r3) li r0,H_SUCCESS std r0,VCPU_GPR(R3)(r3) BEGIN_FTR_SECTION - b 2f /* just send it up to host on 970 */ + b kvm_cede_exit /* just send it up to host on 970 */ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) /* @@ -1446,7 +1446,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_206) or r4,r4,r0 PPC_POPCNTW(R7,R4) cmpw r7,r8 - bge 2f + bge kvm_cede_exit stwcx. r4,0,r6 bne 31b li r0,1 @@ -1555,7 +1555,8 @@ kvm_end_cede: b hcall_real_fallback /* cede when already previously prodded case */ -1: li r0,0 +kvm_cede_prodded: + li r0,0 stb r0,VCPU_PRODDED(r3) sync /* order testing prodded vs. clearing ceded */ stb r0,VCPU_CEDED(r3) @@ -1563,7 +1564,8 @@ kvm_end_cede: blr /* we've ceded but we want to give control to the host */ -2: li r3,H_TOO_HARD +kvm_cede_exit: + li r3,H_TOO_HARD blr secondary_too_late: diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c index c510fc96130..a2b66717813 100644 --- a/arch/powerpc/kvm/e500_tlb.c +++ b/arch/powerpc/kvm/e500_tlb.c @@ -322,11 +322,11 @@ static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref) static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500) { if (vcpu_e500->g2h_tlb1_map) - memset(vcpu_e500->g2h_tlb1_map, - sizeof(u64) * vcpu_e500->gtlb_params[1].entries, 0); + memset(vcpu_e500->g2h_tlb1_map, 0, + sizeof(u64) * vcpu_e500->gtlb_params[1].entries); if (vcpu_e500->h2g_tlb1_rmap) - memset(vcpu_e500->h2g_tlb1_rmap, - sizeof(unsigned int) * host_tlb_params[1].entries, 0); + memset(vcpu_e500->h2g_tlb1_rmap, 0, + sizeof(unsigned int) * host_tlb_params[1].entries); } static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500) @@ -539,6 +539,9 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, ref, gvaddr, stlbe); + + /* Clear i-cache for new pages */ + kvmppc_mmu_flush_icache(pfn); } /* XXX only map the one-one case, for now use TLB0 */ diff --git a/arch/powerpc/lib/copyuser_power7.S b/arch/powerpc/lib/copyuser_power7.S index f9ede7c6606..0d24ff15f5f 100644 --- a/arch/powerpc/lib/copyuser_power7.S +++ b/arch/powerpc/lib/copyuser_power7.S @@ -288,7 +288,7 @@ err1; stb r0,0(r3) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_usercopy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -326,38 +326,7 @@ err1; stb r0,0(r3) dcbt r0,r8,0b01010 /* GO */ .machine pop - /* - * We prefetch both the source and destination using enhanced touch - * instructions. We use a stream ID of 0 for the load side and - * 1 for the store side. - */ - clrrdi r6,r4,7 - clrrdi r9,r3,7 - ori r9,r9,1 /* stream=1 */ - - srdi r7,r5,7 /* length in cachelines, capped at 0x3FF */ - cmpldi cr1,r7,0x3FF - ble cr1,1f - li r7,0x3FF -1: lis r0,0x0E00 /* depth=7 */ - sldi r7,r7,7 - or r7,r7,r0 - ori r10,r7,1 /* stream=1 */ - - lis r8,0x8000 /* GO=1 */ - clrldi r8,r8,32 - -.machine push -.machine "power4" - dcbt r0,r6,0b01000 - dcbt r0,r7,0b01010 - dcbtst r0,r9,0b01000 - dcbtst r0,r10,0b01010 - eieio - dcbt r0,r8,0b01010 /* GO */ -.machine pop - - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/lib/memcpy_power7.S b/arch/powerpc/lib/memcpy_power7.S index 0efdc51bc71..7ba6c96de77 100644 --- a/arch/powerpc/lib/memcpy_power7.S +++ b/arch/powerpc/lib/memcpy_power7.S @@ -222,7 +222,7 @@ _GLOBAL(memcpy_power7) std r0,16(r1) stdu r1,-STACKFRAMESIZE(r1) bl .enter_vmx_copy - cmpwi r3,0 + cmpwi cr1,r3,0 ld r0,STACKFRAMESIZE+16(r1) ld r3,STACKFRAMESIZE+48(r1) ld r4,STACKFRAMESIZE+56(r1) @@ -260,7 +260,7 @@ _GLOBAL(memcpy_power7) dcbt r0,r8,0b01010 /* GO */ .machine pop - beq .Lunwind_stack_nonvmx_copy + beq cr1,.Lunwind_stack_nonvmx_copy /* * If source and destination are not relatively aligned we use a diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index baaafde7d13..fbdad0e3929 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -469,6 +469,7 @@ void flush_dcache_icache_page(struct page *page) __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif } +EXPORT_SYMBOL(flush_dcache_icache_page); void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 77b49ddda9d..7cd2dbd6e4c 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1431,7 +1431,7 @@ static void perf_event_interrupt(struct pt_regs *regs) if (!event->hw.idx || is_limited_pmc(event->hw.idx)) continue; val = read_pmc(event->hw.idx); - if ((int)val < 0) { + if (pmc_overflow(val)) { /* event has overflowed */ found = 1; record_and_restart(event, val, regs); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index a7b2a600d0a..c37f4613632 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -465,7 +465,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) iounmap(hose->cfg_data); iounmap(hose->cfg_addr); pcibios_free_controller(hose); - return 0; + return -ENODEV; } setup_pci_cmd(hose); @@ -827,6 +827,7 @@ struct device_node *fsl_pci_primary; void __devinit fsl_pci_init(void) { + int ret; struct device_node *node; struct pci_controller *hose; dma_addr_t max = 0xffffffff; @@ -855,10 +856,12 @@ void __devinit fsl_pci_init(void) if (!fsl_pci_primary) fsl_pci_primary = node; - fsl_add_bridge(node, fsl_pci_primary == node); - hose = pci_find_hose_for_OF_device(node); - max = min(max, hose->dma_window_base_cur + - hose->dma_window_size); + ret = fsl_add_bridge(node, fsl_pci_primary == node); + if (ret == 0) { + hose = pci_find_hose_for_OF_device(node); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } } } diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c index 483d8fa72e8..e961f8c4a8f 100644 --- a/arch/powerpc/sysdev/mpic_msgr.c +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -14,6 +14,9 @@ #include <linux/list.h> #include <linux/of_platform.h> #include <linux/errno.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/slab.h> #include <asm/prom.h> #include <asm/hw_irq.h> #include <asm/ppc-pci.h> diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index eab3492a45c..9b49c65ee7a 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -17,6 +17,7 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/kallsyms.h> +#include <linux/kmsg_dump.h> #include <linux/cpumask.h> #include <linux/export.h> #include <linux/sysrq.h> @@ -894,13 +895,13 @@ cmds(struct pt_regs *excp) #endif default: printf("Unrecognized command: "); - do { + do { if (' ' < cmd && cmd <= '~') putchar(cmd); else printf("\\x%x", cmd); cmd = inchar(); - } while (cmd != '\n'); + } while (cmd != '\n'); printf(" (type ? for help)\n"); break; } @@ -1097,7 +1098,7 @@ static long check_bp_loc(unsigned long addr) return 1; } -static char *breakpoint_help_string = +static char *breakpoint_help_string = "Breakpoint command usage:\n" "b show breakpoints\n" "b <addr> [cnt] set breakpoint at given instr addr\n" @@ -1193,7 +1194,7 @@ bpt_cmds(void) default: termch = cmd; - cmd = skipbl(); + cmd = skipbl(); if (cmd == '?') { printf(breakpoint_help_string); break; @@ -1359,7 +1360,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr, sp + REGS_OFFSET); break; } - printf("--- Exception: %lx %s at ", regs.trap, + printf("--- Exception: %lx %s at ", regs.trap, getvecname(TRAP(®s))); pc = regs.nip; lr = regs.link; @@ -1623,14 +1624,14 @@ static void super_regs(void) cmd = skipbl(); if (cmd == '\n') { - unsigned long sp, toc; + unsigned long sp, toc; asm("mr %0,1" : "=r" (sp) :); asm("mr %0,2" : "=r" (toc) :); printf("msr = "REG" sprg0= "REG"\n", mfmsr(), mfspr(SPRN_SPRG0)); printf("pvr = "REG" sprg1= "REG"\n", - mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); + mfspr(SPRN_PVR), mfspr(SPRN_SPRG1)); printf("dec = "REG" sprg2= "REG"\n", mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); @@ -1783,7 +1784,7 @@ byterev(unsigned char *val, int size) static int brev; static int mnoread; -static char *memex_help_string = +static char *memex_help_string = "Memory examine command usage:\n" "m [addr] [flags] examine/change memory\n" " addr is optional. will start where left off.\n" @@ -1798,7 +1799,7 @@ static char *memex_help_string = "NOTE: flags are saved as defaults\n" ""; -static char *memex_subcmd_help_string = +static char *memex_subcmd_help_string = "Memory examine subcommands:\n" " hexval write this val to current location\n" " 'string' write chars from string to this location\n" @@ -2064,7 +2065,7 @@ prdump(unsigned long adrs, long ndump) nr = mread(adrs, temp, r); adrs += nr; for (m = 0; m < r; ++m) { - if ((m & (sizeof(long) - 1)) == 0 && m > 0) + if ((m & (sizeof(long) - 1)) == 0 && m > 0) putchar(' '); if (m < nr) printf("%.2x", temp[m]); @@ -2072,7 +2073,7 @@ prdump(unsigned long adrs, long ndump) printf("%s", fault_chars[fault_type]); } for (; m < 16; ++m) { - if ((m & (sizeof(long) - 1)) == 0) + if ((m & (sizeof(long) - 1)) == 0) putchar(' '); printf(" "); } @@ -2148,45 +2149,28 @@ print_address(unsigned long addr) void dump_log_buf(void) { - const unsigned long size = 128; - unsigned long end, addr; - unsigned char buf[size + 1]; - - addr = 0; - buf[size] = '\0'; - - if (setjmp(bus_error_jmp) != 0) { - printf("Unable to lookup symbol __log_buf!\n"); - return; - } - - catch_memory_errors = 1; - sync(); - addr = kallsyms_lookup_name("__log_buf"); - - if (! addr) - printf("Symbol __log_buf not found!\n"); - else { - end = addr + (1 << CONFIG_LOG_BUF_SHIFT); - while (addr < end) { - if (! mread(addr, buf, size)) { - printf("Can't read memory at address 0x%lx\n", addr); - break; - } - - printf("%s", buf); - - if (strlen(buf) < size) - break; - - addr += size; - } - } - - sync(); - /* wait a little while to see if we get a machine check */ - __delay(200); - catch_memory_errors = 0; + struct kmsg_dumper dumper = { .active = 1 }; + unsigned char buf[128]; + size_t len; + + if (setjmp(bus_error_jmp) != 0) { + printf("Error dumping printk buffer!\n"); + return; + } + + catch_memory_errors = 1; + sync(); + + kmsg_dump_rewind_nolock(&dumper); + while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) { + buf[len] = '\0'; + printf("%s", buf); + } + + sync(); + /* wait a little while to see if we get a machine check */ + __delay(200); + catch_memory_errors = 0; } /* diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index b315a33867f..33692eaabab 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -12,8 +12,7 @@ * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. * - * These are fair FIFO ticket locks, which are currently limited to 256 - * CPUs. + * These are fair FIFO ticket locks, which support up to 2^16 CPUs. * * (the type definitions are in asm/spinlock_types.h) */ diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index afb7ff79a29..ced4534baed 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -165,7 +165,7 @@ static const unsigned char * const k7_nops[ASM_NOP_MAX+2] = #endif #ifdef P6_NOP1 -static const unsigned char __initconst_or_module p6nops[] = +static const unsigned char p6nops[] = { P6_NOP1, P6_NOP2, diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 7ad683d7864..d44f7829968 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -270,7 +270,7 @@ void fixup_irqs(void) if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { break_affinity = 1; - affinity = cpu_all_mask; + affinity = cpu_online_mask; } chip = irq_data_get_irq_chip(data); diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 8a2ce8fd41c..82746f942cd 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -143,11 +143,12 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, unsigned int *current_size) { struct microcode_header_amd *mc_hdr; - unsigned int actual_size; + unsigned int actual_size, patch_size; u16 equiv_cpu_id; /* size of the current patch we're staring at */ - *current_size = *(u32 *)(ucode_ptr + 4) + SECTION_HDR_SIZE; + patch_size = *(u32 *)(ucode_ptr + 4); + *current_size = patch_size + SECTION_HDR_SIZE; equiv_cpu_id = find_equiv_id(); if (!equiv_cpu_id) @@ -174,7 +175,7 @@ static int get_matching_microcode(int cpu, const u8 *ucode_ptr, /* * now that the header looks sane, verify its size */ - actual_size = verify_ucode_size(cpu, *current_size, leftover_size); + actual_size = verify_ucode_size(cpu, patch_size, leftover_size); if (!actual_size) return 0; diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 97d9a9914ba..a3b57a27be8 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -475,13 +475,26 @@ register_address(struct x86_emulate_ctxt *ctxt, unsigned long reg) return address_mask(ctxt, reg); } +static void masked_increment(ulong *reg, ulong mask, int inc) +{ + assign_masked(reg, *reg + inc, mask); +} + static inline void register_address_increment(struct x86_emulate_ctxt *ctxt, unsigned long *reg, int inc) { + ulong mask; + if (ctxt->ad_bytes == sizeof(unsigned long)) - *reg += inc; + mask = ~0UL; else - *reg = (*reg & ~ad_mask(ctxt)) | ((*reg + inc) & ad_mask(ctxt)); + mask = ad_mask(ctxt); + masked_increment(reg, mask, inc); +} + +static void rsp_increment(struct x86_emulate_ctxt *ctxt, int inc) +{ + masked_increment(&ctxt->regs[VCPU_REGS_RSP], stack_mask(ctxt), inc); } static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel) @@ -1522,8 +1535,8 @@ static int push(struct x86_emulate_ctxt *ctxt, void *data, int bytes) { struct segmented_address addr; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], -bytes); - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + rsp_increment(ctxt, -bytes); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; return segmented_write(ctxt, addr, data, bytes); @@ -1542,13 +1555,13 @@ static int emulate_pop(struct x86_emulate_ctxt *ctxt, int rc; struct segmented_address addr; - addr.ea = register_address(ctxt, ctxt->regs[VCPU_REGS_RSP]); + addr.ea = ctxt->regs[VCPU_REGS_RSP] & stack_mask(ctxt); addr.seg = VCPU_SREG_SS; rc = segmented_read(ctxt, addr, dest, len); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], len); + rsp_increment(ctxt, len); return rc; } @@ -1688,8 +1701,7 @@ static int em_popa(struct x86_emulate_ctxt *ctxt) while (reg >= VCPU_REGS_RAX) { if (reg == VCPU_REGS_RSP) { - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], - ctxt->op_bytes); + rsp_increment(ctxt, ctxt->op_bytes); --reg; } @@ -2825,7 +2837,7 @@ static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt) rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes); if (rc != X86EMUL_CONTINUE) return rc; - register_address_increment(ctxt, &ctxt->regs[VCPU_REGS_RSP], ctxt->src.val); + rsp_increment(ctxt, ctxt->src.val); return X86EMUL_CONTINUE; } diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 01ca0042393..7fbd0d273ea 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -4113,16 +4113,21 @@ static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) LIST_HEAD(invalid_list); /* + * Never scan more than sc->nr_to_scan VM instances. + * Will not hit this condition practically since we do not try + * to shrink more than one VM and it is very unlikely to see + * !n_used_mmu_pages so many times. + */ + if (!nr_to_scan--) + break; + /* * n_used_mmu_pages is accessed without holding kvm->mmu_lock * here. We may skip a VM instance errorneosly, but we do not * want to shrink a VM that only started to populate its MMU * anyway. */ - if (kvm->arch.n_used_mmu_pages > 0) { - if (!nr_to_scan--) - break; + if (!kvm->arch.n_used_mmu_pages) continue; - } idx = srcu_read_lock(&kvm->srcu); spin_lock(&kvm->mmu_lock); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 42bce48f692..dce75b76031 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -806,7 +806,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc); * kvm-specific. Those are put in the beginning of the list. */ -#define KVM_SAVE_MSRS_BEGIN 9 +#define KVM_SAVE_MSRS_BEGIN 10 static u32 msrs_to_save[] = { MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK, MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW, diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bf4bda6d3e9..9642d4a3860 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -31,7 +31,6 @@ #include <linux/pci.h> #include <linux/gfp.h> #include <linux/memblock.h> -#include <linux/syscore_ops.h> #include <xen/xen.h> #include <xen/interface/xen.h> @@ -1470,130 +1469,38 @@ asmlinkage void __init xen_start_kernel(void) #endif } -#ifdef CONFIG_XEN_PVHVM -/* - * The pfn containing the shared_info is located somewhere in RAM. This - * will cause trouble if the current kernel is doing a kexec boot into a - * new kernel. The new kernel (and its startup code) can not know where - * the pfn is, so it can not reserve the page. The hypervisor will - * continue to update the pfn, and as a result memory corruption occours - * in the new kernel. - * - * One way to work around this issue is to allocate a page in the - * xen-platform pci device's BAR memory range. But pci init is done very - * late and the shared_info page is already in use very early to read - * the pvclock. So moving the pfn from RAM to MMIO is racy because some - * code paths on other vcpus could access the pfn during the small - * window when the old pfn is moved to the new pfn. There is even a - * small window were the old pfn is not backed by a mfn, and during that - * time all reads return -1. - * - * Because it is not known upfront where the MMIO region is located it - * can not be used right from the start in xen_hvm_init_shared_info. - * - * To minimise trouble the move of the pfn is done shortly before kexec. - * This does not eliminate the race because all vcpus are still online - * when the syscore_ops will be called. But hopefully there is no work - * pending at this point in time. Also the syscore_op is run last which - * reduces the risk further. - */ - -static struct shared_info *xen_hvm_shared_info; - -static void xen_hvm_connect_shared_info(unsigned long pfn) +void __ref xen_hvm_init_shared_info(void) { + int cpu; struct xen_add_to_physmap xatp; + static struct shared_info *shared_info_page = 0; + if (!shared_info_page) + shared_info_page = (struct shared_info *) + extend_brk(PAGE_SIZE, PAGE_SIZE); xatp.domid = DOMID_SELF; xatp.idx = 0; xatp.space = XENMAPSPACE_shared_info; - xatp.gpfn = pfn; + xatp.gpfn = __pa(shared_info_page) >> PAGE_SHIFT; if (HYPERVISOR_memory_op(XENMEM_add_to_physmap, &xatp)) BUG(); -} -static void xen_hvm_set_shared_info(struct shared_info *sip) -{ - int cpu; - - HYPERVISOR_shared_info = sip; + HYPERVISOR_shared_info = (struct shared_info *)shared_info_page; /* xen_vcpu is a pointer to the vcpu_info struct in the shared_info * page, we use it in the event channel upcall and in some pvclock * related functions. We don't need the vcpu_info placement * optimizations because we don't use any pv_mmu or pv_irq op on * HVM. - * When xen_hvm_set_shared_info is run at boot time only vcpu 0 is - * online but xen_hvm_set_shared_info is run at resume time too and + * When xen_hvm_init_shared_info is run at boot time only vcpu 0 is + * online but xen_hvm_init_shared_info is run at resume time too and * in that case multiple vcpus might be online. */ for_each_online_cpu(cpu) { per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; } } -/* Reconnect the shared_info pfn to a mfn */ -void xen_hvm_resume_shared_info(void) -{ - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); -} - -#ifdef CONFIG_KEXEC -static struct shared_info *xen_hvm_shared_info_kexec; -static unsigned long xen_hvm_shared_info_pfn_kexec; - -/* Remember a pfn in MMIO space for kexec reboot */ -void __devinit xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn) -{ - xen_hvm_shared_info_kexec = sip; - xen_hvm_shared_info_pfn_kexec = pfn; -} - -static void xen_hvm_syscore_shutdown(void) -{ - struct xen_memory_reservation reservation = { - .domid = DOMID_SELF, - .nr_extents = 1, - }; - unsigned long prev_pfn; - int rc; - - if (!xen_hvm_shared_info_kexec) - return; - - prev_pfn = __pa(xen_hvm_shared_info) >> PAGE_SHIFT; - set_xen_guest_handle(reservation.extent_start, &prev_pfn); - - /* Move pfn to MMIO, disconnects previous pfn from mfn */ - xen_hvm_connect_shared_info(xen_hvm_shared_info_pfn_kexec); - - /* Update pointers, following hypercall is also a memory barrier */ - xen_hvm_set_shared_info(xen_hvm_shared_info_kexec); - - /* Allocate new mfn for previous pfn */ - do { - rc = HYPERVISOR_memory_op(XENMEM_populate_physmap, &reservation); - if (rc == 0) - msleep(123); - } while (rc == 0); - - /* Make sure the previous pfn is really connected to a (new) mfn */ - BUG_ON(rc != 1); -} - -static struct syscore_ops xen_hvm_syscore_ops = { - .shutdown = xen_hvm_syscore_shutdown, -}; -#endif - -/* Use a pfn in RAM, may move to MMIO before kexec. */ -static void __init xen_hvm_init_shared_info(void) -{ - /* Remember pointer for resume */ - xen_hvm_shared_info = extend_brk(PAGE_SIZE, PAGE_SIZE); - xen_hvm_connect_shared_info(__pa(xen_hvm_shared_info) >> PAGE_SHIFT); - xen_hvm_set_shared_info(xen_hvm_shared_info); -} - +#ifdef CONFIG_XEN_PVHVM static void __init init_hvm_pv_info(void) { int major, minor; @@ -1644,9 +1551,6 @@ static void __init xen_hvm_guest_init(void) init_hvm_pv_info(); xen_hvm_init_shared_info(); -#ifdef CONFIG_KEXEC - register_syscore_ops(&xen_hvm_syscore_ops); -#endif if (xen_feature(XENFEAT_hvm_callback_vector)) xen_have_vector_callback = 1; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index b2e91d40a4c..d4b25546325 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -196,9 +196,11 @@ RESERVE_BRK(p2m_mid_identity, PAGE_SIZE * 2 * 3); /* When we populate back during bootup, the amount of pages can vary. The * max we have is seen is 395979, but that does not mean it can't be more. - * But some machines can have 3GB I/O holes even. So lets reserve enough - * for 4GB of I/O and E820 holes. */ -RESERVE_BRK(p2m_populated, PMD_SIZE * 4); + * Some machines can have 3GB I/O holes even. With early_can_reuse_p2m_middle + * it can re-use Xen provided mfn_list array, so we only need to allocate at + * most three P2M top nodes. */ +RESERVE_BRK(p2m_populated, PAGE_SIZE * 3); + static inline unsigned p2m_top_index(unsigned long pfn) { BUG_ON(pfn >= MAX_P2M_PFN); @@ -575,12 +577,99 @@ static bool __init early_alloc_p2m(unsigned long pfn) } return true; } + +/* + * Skim over the P2M tree looking at pages that are either filled with + * INVALID_P2M_ENTRY or with 1:1 PFNs. If found, re-use that page and + * replace the P2M leaf with a p2m_missing or p2m_identity. + * Stick the old page in the new P2M tree location. + */ +bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn) +{ + unsigned topidx; + unsigned mididx; + unsigned ident_pfns; + unsigned inv_pfns; + unsigned long *p2m; + unsigned long *mid_mfn_p; + unsigned idx; + unsigned long pfn; + + /* We only look when this entails a P2M middle layer */ + if (p2m_index(set_pfn)) + return false; + + for (pfn = 0; pfn <= MAX_DOMAIN_PAGES; pfn += P2M_PER_PAGE) { + topidx = p2m_top_index(pfn); + + if (!p2m_top[topidx]) + continue; + + if (p2m_top[topidx] == p2m_mid_missing) + continue; + + mididx = p2m_mid_index(pfn); + p2m = p2m_top[topidx][mididx]; + if (!p2m) + continue; + + if ((p2m == p2m_missing) || (p2m == p2m_identity)) + continue; + + if ((unsigned long)p2m == INVALID_P2M_ENTRY) + continue; + + ident_pfns = 0; + inv_pfns = 0; + for (idx = 0; idx < P2M_PER_PAGE; idx++) { + /* IDENTITY_PFNs are 1:1 */ + if (p2m[idx] == IDENTITY_FRAME(pfn + idx)) + ident_pfns++; + else if (p2m[idx] == INVALID_P2M_ENTRY) + inv_pfns++; + else + break; + } + if ((ident_pfns == P2M_PER_PAGE) || (inv_pfns == P2M_PER_PAGE)) + goto found; + } + return false; +found: + /* Found one, replace old with p2m_identity or p2m_missing */ + p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing); + /* And the other for save/restore.. */ + mid_mfn_p = p2m_top_mfn_p[topidx]; + /* NOTE: Even if it is a p2m_identity it should still be point to + * a page filled with INVALID_P2M_ENTRY entries. */ + mid_mfn_p[mididx] = virt_to_mfn(p2m_missing); + + /* Reset where we want to stick the old page in. */ + topidx = p2m_top_index(set_pfn); + mididx = p2m_mid_index(set_pfn); + + /* This shouldn't happen */ + if (WARN_ON(p2m_top[topidx] == p2m_mid_missing)) + early_alloc_p2m(set_pfn); + + if (WARN_ON(p2m_top[topidx][mididx] != p2m_missing)) + return false; + + p2m_init(p2m); + p2m_top[topidx][mididx] = p2m; + mid_mfn_p = p2m_top_mfn_p[topidx]; + mid_mfn_p[mididx] = virt_to_mfn(p2m); + + return true; +} bool __init early_set_phys_to_machine(unsigned long pfn, unsigned long mfn) { if (unlikely(!__set_phys_to_machine(pfn, mfn))) { if (!early_alloc_p2m(pfn)) return false; + if (early_can_reuse_p2m_middle(pfn, mfn)) + return __set_phys_to_machine(pfn, mfn); + if (!early_alloc_p2m_middle(pfn, false /* boundary crossover OK!*/)) return false; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index ead85576d54..d11ca11d14f 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -78,9 +78,16 @@ static void __init xen_add_extra_mem(u64 start, u64 size) memblock_reserve(start, size); xen_max_p2m_pfn = PFN_DOWN(start + size); + for (pfn = PFN_DOWN(start); pfn < xen_max_p2m_pfn; pfn++) { + unsigned long mfn = pfn_to_mfn(pfn); + + if (WARN(mfn == pfn, "Trying to over-write 1-1 mapping (pfn: %lx)\n", pfn)) + continue; + WARN(mfn != INVALID_P2M_ENTRY, "Trying to remove %lx which has %lx mfn!\n", + pfn, mfn); - for (pfn = PFN_DOWN(start); pfn <= xen_max_p2m_pfn; pfn++) __set_phys_to_machine(pfn, INVALID_P2M_ENTRY); + } } static unsigned long __init xen_do_chunk(unsigned long start, diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index ae8a00c39de..45329c8c226 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -30,7 +30,7 @@ void xen_arch_hvm_post_suspend(int suspend_cancelled) { #ifdef CONFIG_XEN_PVHVM int cpu; - xen_hvm_resume_shared_info(); + xen_hvm_init_shared_info(); xen_callback_vector(); xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 1e4329e04e0..202d4c15015 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -41,7 +41,7 @@ void xen_enable_syscall(void); void xen_vcpu_restore(void); void xen_callback_vector(void); -void xen_hvm_resume_shared_info(void); +void xen_hvm_init_shared_info(void); void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); diff --git a/block/blk-lib.c b/block/blk-lib.c index 2b461b496a7..19cc761cacb 100644 --- a/block/blk-lib.c +++ b/block/blk-lib.c @@ -44,6 +44,7 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, struct request_queue *q = bdev_get_queue(bdev); int type = REQ_WRITE | REQ_DISCARD; unsigned int max_discard_sectors; + unsigned int granularity, alignment, mask; struct bio_batch bb; struct bio *bio; int ret = 0; @@ -54,18 +55,20 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, if (!blk_queue_discard(q)) return -EOPNOTSUPP; + /* Zero-sector (unknown) and one-sector granularities are the same. */ + granularity = max(q->limits.discard_granularity >> 9, 1U); + mask = granularity - 1; + alignment = (bdev_discard_alignment(bdev) >> 9) & mask; + /* * Ensure that max_discard_sectors is of the proper - * granularity + * granularity, so that requests stay aligned after a split. */ max_discard_sectors = min(q->limits.max_discard_sectors, UINT_MAX >> 9); + max_discard_sectors = round_down(max_discard_sectors, granularity); if (unlikely(!max_discard_sectors)) { /* Avoid infinite loop below. Being cautious never hurts. */ return -EOPNOTSUPP; - } else if (q->limits.discard_granularity) { - unsigned int disc_sects = q->limits.discard_granularity >> 9; - - max_discard_sectors &= ~(disc_sects - 1); } if (flags & BLKDEV_DISCARD_SECURE) { @@ -79,25 +82,37 @@ int blkdev_issue_discard(struct block_device *bdev, sector_t sector, bb.wait = &wait; while (nr_sects) { + unsigned int req_sects; + sector_t end_sect; + bio = bio_alloc(gfp_mask, 1); if (!bio) { ret = -ENOMEM; break; } + req_sects = min_t(sector_t, nr_sects, max_discard_sectors); + + /* + * If splitting a request, and the next starting sector would be + * misaligned, stop the discard at the previous aligned sector. + */ + end_sect = sector + req_sects; + if (req_sects < nr_sects && (end_sect & mask) != alignment) { + end_sect = + round_down(end_sect - alignment, granularity) + + alignment; + req_sects = end_sect - sector; + } + bio->bi_sector = sector; bio->bi_end_io = bio_batch_end_io; bio->bi_bdev = bdev; bio->bi_private = &bb; - if (nr_sects > max_discard_sectors) { - bio->bi_size = max_discard_sectors << 9; - nr_sects -= max_discard_sectors; - sector += max_discard_sectors; - } else { - bio->bi_size = nr_sects << 9; - nr_sects = 0; - } + bio->bi_size = req_sects << 9; + nr_sects -= req_sects; + sector = end_sect; atomic_inc(&bb.done); submit_bio(type, bio); diff --git a/block/blk-merge.c b/block/blk-merge.c index 160035f5488..e76279e4116 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -110,6 +110,49 @@ static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio, return 0; } +static void +__blk_segment_map_sg(struct request_queue *q, struct bio_vec *bvec, + struct scatterlist *sglist, struct bio_vec **bvprv, + struct scatterlist **sg, int *nsegs, int *cluster) +{ + + int nbytes = bvec->bv_len; + + if (*bvprv && *cluster) { + if ((*sg)->length + nbytes > queue_max_segment_size(q)) + goto new_segment; + + if (!BIOVEC_PHYS_MERGEABLE(*bvprv, bvec)) + goto new_segment; + if (!BIOVEC_SEG_BOUNDARY(q, *bvprv, bvec)) + goto new_segment; + + (*sg)->length += nbytes; + } else { +new_segment: + if (!*sg) + *sg = sglist; + else { + /* + * If the driver previously mapped a shorter + * list, we could see a termination bit + * prematurely unless it fully inits the sg + * table on each mapping. We KNOW that there + * must be more entries here or the driver + * would be buggy, so force clear the + * termination bit to avoid doing a full + * sg_init_table() in drivers for each command. + */ + (*sg)->page_link &= ~0x02; + *sg = sg_next(*sg); + } + + sg_set_page(*sg, bvec->bv_page, nbytes, bvec->bv_offset); + (*nsegs)++; + } + *bvprv = bvec; +} + /* * map a request to scatterlist, return number of sg entries setup. Caller * must make sure sg can hold rq->nr_phys_segments entries @@ -131,41 +174,8 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq, bvprv = NULL; sg = NULL; rq_for_each_segment(bvec, rq, iter) { - int nbytes = bvec->bv_len; - - if (bvprv && cluster) { - if (sg->length + nbytes > queue_max_segment_size(q)) - goto new_segment; - - if (!BIOVEC_PHYS_MERGEABLE(bvprv, bvec)) - goto new_segment; - if (!BIOVEC_SEG_BOUNDARY(q, bvprv, bvec)) - goto new_segment; - - sg->length += nbytes; - } else { -new_segment: - if (!sg) - sg = sglist; - else { - /* - * If the driver previously mapped a shorter - * list, we could see a termination bit - * prematurely unless it fully inits the sg - * table on each mapping. We KNOW that there - * must be more entries here or the driver - * would be buggy, so force clear the - * termination bit to avoid doing a full - * sg_init_table() in drivers for each command. - */ - sg->page_link &= ~0x02; - sg = sg_next(sg); - } - - sg_set_page(sg, bvec->bv_page, nbytes, bvec->bv_offset); - nsegs++; - } - bvprv = bvec; + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); } /* segments in rq */ @@ -199,6 +209,43 @@ new_segment: } EXPORT_SYMBOL(blk_rq_map_sg); +/** + * blk_bio_map_sg - map a bio to a scatterlist + * @q: request_queue in question + * @bio: bio being mapped + * @sglist: scatterlist being mapped + * + * Note: + * Caller must make sure sg can hold bio->bi_phys_segments entries + * + * Will return the number of sg entries setup + */ +int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist) +{ + struct bio_vec *bvec, *bvprv; + struct scatterlist *sg; + int nsegs, cluster; + unsigned long i; + + nsegs = 0; + cluster = blk_queue_cluster(q); + + bvprv = NULL; + sg = NULL; + bio_for_each_segment(bvec, bio, i) { + __blk_segment_map_sg(q, bvec, sglist, &bvprv, &sg, + &nsegs, &cluster); + } /* segments in bio */ + + if (sg) + sg_mark_end(sg); + + BUG_ON(bio->bi_phys_segments && nsegs > bio->bi_phys_segments); + return nsegs; +} +EXPORT_SYMBOL(blk_bio_map_sg); + static inline int ll_new_hw_segment(struct request_queue *q, struct request *req, struct bio *bio) diff --git a/block/genhd.c b/block/genhd.c index cac7366957c..d839723303c 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -835,7 +835,7 @@ static void disk_seqf_stop(struct seq_file *seqf, void *v) static void *show_partition_start(struct seq_file *seqf, loff_t *pos) { - static void *p; + void *p; p = disk_seqf_start(seqf, pos); if (!IS_ERR_OR_NULL(p) && !*pos) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 2be8ef1d309..27cecd313e7 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -115,7 +115,7 @@ config SATA_SIL24 If unsure, say N. config ATA_SFF - bool "ATA SFF support" + bool "ATA SFF support (for legacy IDE and PATA)" default y help This option adds support for ATA controllers with SFF diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 062e6a1a248..50d5dea0ff5 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -256,6 +256,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8c07), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0e), board_ahci }, /* Lynx Point RAID */ { PCI_VDEVICE(INTEL, 0x8c0f), board_ahci }, /* Lynx Point RAID */ + { PCI_VDEVICE(INTEL, 0x9c02), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c03), board_ahci }, /* Lynx Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c04), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c05), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c06), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c07), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0e), board_ahci }, /* Lynx Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c0f), board_ahci }, /* Lynx Point-LP RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index c2594ddf25b..57eb1c212a4 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -320,6 +320,7 @@ extern struct device_attribute *ahci_sdev_attrs[]; extern struct ata_port_operations ahci_ops; extern struct ata_port_operations ahci_pmp_retry_srst_ops; +unsigned int ahci_dev_classify(struct ata_port *ap); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts); void ahci_save_initial_config(struct device *dev, diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3c809bfbccf..ef773e12af7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -329,6 +329,14 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x8c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (Lynx Point) */ { 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + /* SATA Controller IDE (Lynx Point-LP) */ + { 0x8086, 0x9c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, /* SATA Controller IDE (DH89xxCC) */ { 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index f9eaa82311a..555c07afa05 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1139,7 +1139,7 @@ static void ahci_dev_config(struct ata_device *dev) } } -static unsigned int ahci_dev_classify(struct ata_port *ap) +unsigned int ahci_dev_classify(struct ata_port *ap) { void __iomem *port_mmio = ahci_port_base(ap); struct ata_taskfile tf; @@ -1153,6 +1153,7 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } +EXPORT_SYMBOL_GPL(ahci_dev_classify); void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, u32 opts) diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 902b5a45717..fd9ecf74e63 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -60,17 +60,7 @@ acpi_handle ata_ap_acpi_handle(struct ata_port *ap) if (ap->flags & ATA_FLAG_ACPI_SATA) return NULL; - /* - * If acpi bind operation has already happened, we can get the handle - * for the port by checking the corresponding scsi_host device's - * firmware node, otherwise we will need to find out the handle from - * its parent's acpi node. - */ - if (ap->scsi_host) - return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev); - else - return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), - ap->port_no); + return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), ap->port_no); } EXPORT_SYMBOL(ata_ap_acpi_handle); @@ -1101,6 +1091,9 @@ static int ata_acpi_bind_host(struct ata_port *ap, acpi_handle *handle) if (!*handle) return -ENODEV; + if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0) + ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; + return 0; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index fadd5866d40..8e1039c8e15 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4062,7 +4062,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, { "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA }, { "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA }, - { "2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, + { " 2GB ATA Flash Disk", "ADMA428M", ATA_HORKAGE_NODMA }, /* Odd clown on sil3726/4726 PMPs */ { "Config Disk", NULL, ATA_HORKAGE_DISABLE }, @@ -4128,6 +4128,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + { "BUFFALO HD-QSU2/R5", NULL, ATA_HORKAGE_BRIDGE_OK, }, /* Devices which aren't very happy with higher link speeds */ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 361c75cea57..24e51056ac2 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -20,6 +20,7 @@ #include <linux/delay.h> #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/dmi.h> #define DRV_NAME "pata_atiixp" #define DRV_VERSION "0.4.6" @@ -33,11 +34,26 @@ enum { ATIIXP_IDE_UDMA_MODE = 0x56 }; +static const struct dmi_system_id attixp_cable_override_dmi_table[] = { + { + /* Board has onboard PATA<->SATA converters */ + .ident = "MSI E350DM-E33", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "MSI"), + DMI_MATCH(DMI_BOARD_NAME, "E350DM-E33(MS-7720)"), + }, + }, + { } +}; + static int atiixp_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u8 udma; + if (dmi_check_system(attixp_cable_override_dmi_table)) + return ATA_CBL_PATA40_SHORT; + /* Hack from drivers/ide/pci. Really we want to know how to do the raw detection not play follow the bios mode guess */ pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma); diff --git a/drivers/block/drbd/drbd_bitmap.c b/drivers/block/drbd/drbd_bitmap.c index ba91b408aba..d8456649674 100644 --- a/drivers/block/drbd/drbd_bitmap.c +++ b/drivers/block/drbd/drbd_bitmap.c @@ -889,6 +889,7 @@ struct bm_aio_ctx { unsigned int done; unsigned flags; #define BM_AIO_COPY_PAGES 1 +#define BM_WRITE_ALL_PAGES 2 int error; struct kref kref; }; @@ -1059,7 +1060,8 @@ static int bm_rw(struct drbd_conf *mdev, int rw, unsigned flags, unsigned lazy_w if (lazy_writeout_upper_idx && i == lazy_writeout_upper_idx) break; if (rw & WRITE) { - if (bm_test_page_unchanged(b->bm_pages[i])) { + if (!(flags & BM_WRITE_ALL_PAGES) && + bm_test_page_unchanged(b->bm_pages[i])) { dynamic_dev_dbg(DEV, "skipped bm write for idx %u\n", i); continue; } @@ -1141,6 +1143,17 @@ int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local) } /** + * drbd_bm_write_all() - Write the whole bitmap to its on disk location. + * @mdev: DRBD device. + * + * Will write all pages. + */ +int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local) +{ + return bm_rw(mdev, WRITE, BM_WRITE_ALL_PAGES, 0); +} + +/** * drbd_bm_lazy_write_out() - Write bitmap pages 0 to @upper_idx-1, if they have changed. * @mdev: DRBD device. * @upper_idx: 0: write all changed pages; +ve: page index to stop scanning for changed pages diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h index b2ca143d005..b953cc7c9c0 100644 --- a/drivers/block/drbd/drbd_int.h +++ b/drivers/block/drbd/drbd_int.h @@ -1469,6 +1469,7 @@ extern int drbd_bm_e_weight(struct drbd_conf *mdev, unsigned long enr); extern int drbd_bm_write_page(struct drbd_conf *mdev, unsigned int idx) __must_hold(local); extern int drbd_bm_read(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write(struct drbd_conf *mdev) __must_hold(local); +extern int drbd_bm_write_all(struct drbd_conf *mdev) __must_hold(local); extern int drbd_bm_write_copy_pages(struct drbd_conf *mdev) __must_hold(local); extern unsigned long drbd_bm_ALe_set_all(struct drbd_conf *mdev, unsigned long al_enr); diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index dbe6135a2ab..f93a0320e95 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -79,6 +79,7 @@ static int w_md_sync(struct drbd_conf *mdev, struct drbd_work *w, int unused); static void md_sync_timer_fn(unsigned long data); static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused); static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused); +static void _tl_clear(struct drbd_conf *mdev); MODULE_AUTHOR("Philipp Reisner <phil@linbit.com>, " "Lars Ellenberg <lars@linbit.com>"); @@ -432,19 +433,10 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) /* Actions operating on the disk state, also want to work on requests that got barrier acked. */ - switch (what) { - case fail_frozen_disk_io: - case restart_frozen_disk_io: - list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { - req = list_entry(le, struct drbd_request, tl_requests); - _req_mod(req, what); - } - case connection_lost_while_pending: - case resend: - break; - default: - dev_err(DEV, "what = %d in _tl_restart()\n", what); + list_for_each_safe(le, tle, &mdev->barrier_acked_requests) { + req = list_entry(le, struct drbd_request, tl_requests); + _req_mod(req, what); } } @@ -459,11 +451,16 @@ static void _tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) */ void tl_clear(struct drbd_conf *mdev) { + spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); + spin_unlock_irq(&mdev->req_lock); +} + +static void _tl_clear(struct drbd_conf *mdev) +{ struct list_head *le, *tle; struct drbd_request *r; - spin_lock_irq(&mdev->req_lock); - _tl_restart(mdev, connection_lost_while_pending); /* we expect this list to be empty. */ @@ -482,7 +479,6 @@ void tl_clear(struct drbd_conf *mdev) memset(mdev->app_reads_hash, 0, APP_R_HSIZE*sizeof(void *)); - spin_unlock_irq(&mdev->req_lock); } void tl_restart(struct drbd_conf *mdev, enum drbd_req_event what) @@ -1476,12 +1472,12 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os, if (ns.susp_fen) { /* case1: The outdate peer handler is successful: */ if (os.pdsk > D_OUTDATED && ns.pdsk <= D_OUTDATED) { - tl_clear(mdev); if (test_bit(NEW_CUR_UUID, &mdev->flags)) { drbd_uuid_new_current(mdev); clear_bit(NEW_CUR_UUID, &mdev->flags); } spin_lock_irq(&mdev->req_lock); + _tl_clear(mdev); _drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL); spin_unlock_irq(&mdev->req_lock); } diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c index fb9dce8daa2..edb490aad8b 100644 --- a/drivers/block/drbd/drbd_nl.c +++ b/drivers/block/drbd/drbd_nl.c @@ -674,8 +674,8 @@ enum determine_dev_size drbd_determine_dev_size(struct drbd_conf *mdev, enum dds la_size_changed && md_moved ? "size changed and md moved" : la_size_changed ? "size changed" : "md moved"); /* next line implicitly does drbd_suspend_io()+drbd_resume_io() */ - err = drbd_bitmap_io(mdev, &drbd_bm_write, - "size changed", BM_LOCKED_MASK); + err = drbd_bitmap_io(mdev, md_moved ? &drbd_bm_write_all : &drbd_bm_write, + "size changed", BM_LOCKED_MASK); if (err) { rv = dev_size_error; goto out; diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c index 910335c3092..01b2ac641c7 100644 --- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -695,6 +695,12 @@ int __req_mod(struct drbd_request *req, enum drbd_req_event what, break; case resend: + /* Simply complete (local only) READs. */ + if (!(req->rq_state & RQ_WRITE) && !req->w.cb) { + _req_may_be_done(req, m); + break; + } + /* If RQ_NET_OK is already set, we got a P_WRITE_ACK or P_RECV_ACK before the connection loss (B&C only); only P_BARRIER_ACK was missing. Trowing them out of the TL here by pretending we got a BARRIER_ACK @@ -834,7 +840,15 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns req->private_bio = NULL; } if (rw == WRITE) { - remote = 1; + /* Need to replicate writes. Unless it is an empty flush, + * which is better mapped to a DRBD P_BARRIER packet, + * also for drbd wire protocol compatibility reasons. */ + if (unlikely(size == 0)) { + /* The only size==0 bios we expect are empty flushes. */ + D_ASSERT(bio->bi_rw & REQ_FLUSH); + remote = 0; + } else + remote = 1; } else { /* READ || READA */ if (local) { @@ -870,8 +884,11 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio, uns * extent. This waits for any resync activity in the corresponding * resync extent to finish, and, if necessary, pulls in the target * extent into the activity log, which involves further disk io because - * of transactional on-disk meta data updates. */ - if (rw == WRITE && local && !test_bit(AL_SUSPENDED, &mdev->flags)) { + * of transactional on-disk meta data updates. + * Empty flushes don't need to go into the activity log, they can only + * flush data for pending writes which are already in there. */ + if (rw == WRITE && local && size + && !test_bit(AL_SUSPENDED, &mdev->flags)) { req->rq_state |= RQ_IN_ACT_LOG; drbd_al_begin_io(mdev, sector); } @@ -994,7 +1011,10 @@ allocate_barrier: if (rw == WRITE && _req_conflicts(req)) goto fail_conflicting; - list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); + /* no point in adding empty flushes to the transfer log, + * they are mapped to drbd barriers already. */ + if (likely(size!=0)) + list_add_tail(&req->tl_requests, &mdev->newest_tle->requests); /* NOTE remote first: to get the concurrent write detection right, * we must register the request before start of local IO. */ @@ -1014,6 +1034,14 @@ allocate_barrier: mdev->net_conf->on_congestion != OC_BLOCK && mdev->agreed_pro_version >= 96) maybe_pull_ahead(mdev); + /* If this was a flush, queue a drbd barrier/start a new epoch. + * Unless the current epoch was empty anyways, or we are not currently + * replicating, in which case there is no point. */ + if (unlikely(bio->bi_rw & REQ_FLUSH) + && mdev->newest_tle->n_writes + && drbd_should_do_remote(mdev->state)) + queue_barrier(mdev); + spin_unlock_irq(&mdev->req_lock); kfree(b); /* if someone else has beaten us to it... */ diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 17fa04d08be..b47034e650a 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -218,7 +218,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) policy->cur = policy->min = policy->max = omap_getspeed(policy->cpu); - if (atomic_inc_return(&freq_table_users) == 1) + if (!freq_table) result = opp_init_cpufreq_table(mpu_dev, &freq_table); if (result) { @@ -227,6 +227,8 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) goto fail_ck; } + atomic_inc_return(&freq_table_users); + result = cpufreq_frequency_table_cpuinfo(policy, freq_table); if (result) goto fail_table; diff --git a/drivers/crypto/caam/jr.c b/drivers/crypto/caam/jr.c index 53c8c51d588..93d14070141 100644 --- a/drivers/crypto/caam/jr.c +++ b/drivers/crypto/caam/jr.c @@ -63,7 +63,7 @@ static void caam_jr_dequeue(unsigned long devarg) head = ACCESS_ONCE(jrp->head); - spin_lock_bh(&jrp->outlock); + spin_lock(&jrp->outlock); sw_idx = tail = jrp->tail; hw_idx = jrp->out_ring_read_index; @@ -115,7 +115,7 @@ static void caam_jr_dequeue(unsigned long devarg) jrp->tail = tail; } - spin_unlock_bh(&jrp->outlock); + spin_unlock(&jrp->outlock); /* Finally, execute user's callback */ usercall(dev, userdesc, userstatus, userarg); @@ -236,14 +236,14 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, return -EIO; } - spin_lock(&jrp->inplock); + spin_lock_bh(&jrp->inplock); head = jrp->head; tail = ACCESS_ONCE(jrp->tail); if (!rd_reg32(&jrp->rregs->inpring_avail) || CIRC_SPACE(head, tail, JOBR_DEPTH) <= 0) { - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); dma_unmap_single(dev, desc_dma, desc_size, DMA_TO_DEVICE); return -EBUSY; } @@ -265,7 +265,7 @@ int caam_jr_enqueue(struct device *dev, u32 *desc, wr_reg32(&jrp->rregs->inpring_jobadd, 1); - spin_unlock(&jrp->inplock); + spin_unlock_bh(&jrp->inplock); return 0; } diff --git a/drivers/crypto/hifn_795x.c b/drivers/crypto/hifn_795x.c index c9c4befb5a8..df14358d7fa 100644 --- a/drivers/crypto/hifn_795x.c +++ b/drivers/crypto/hifn_795x.c @@ -821,8 +821,8 @@ static int hifn_register_rng(struct hifn_device *dev) /* * We must wait at least 256 Pk_clk cycles between two reads of the rng. */ - dev->rng_wait_time = DIV_ROUND_UP(NSEC_PER_SEC, dev->pk_clk_freq) * - 256; + dev->rng_wait_time = DIV_ROUND_UP_ULL(NSEC_PER_SEC, + dev->pk_clk_freq) * 256; dev->rng.name = dev->name; dev->rng.data_present = hifn_rng_data_present, diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 60ea284407c..8bf8a64e511 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1624,7 +1624,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_ORTEK, USB_DEVICE_ID_ORTEK_WKB2000) }, { HID_USB_DEVICE(USB_VENDOR_ID_PETALYNX, USB_DEVICE_ID_PETALYNX_MAXTER_REMOTE) }, { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX, USB_DEVICE_ID_PRIMAX_KEYBOARD) }, - { HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONE) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ARVO) }, { HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) }, diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c index 92406097efe..8d1e32d7cd9 100644 --- a/drivers/ide/ide-pm.c +++ b/drivers/ide/ide-pm.c @@ -4,7 +4,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; @@ -40,7 +40,7 @@ int generic_ide_suspend(struct device *dev, pm_message_t mesg) int generic_ide_resume(struct device *dev) { - ide_drive_t *drive = dev_get_drvdata(dev); + ide_drive_t *drive = to_ide_device(dev); ide_drive_t *pair = ide_get_pair_dev(drive); ide_hwif_t *hwif = drive->hwif; struct request *rq; diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index ea0aaa3f13d..a9f4049c676 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -47,6 +47,8 @@ struct bcm63xx_spi { /* Platform data */ u32 speed_hz; unsigned fifo_size; + unsigned int msg_type_shift; + unsigned int msg_ctl_width; /* Data buffers */ const unsigned char *tx_ptr; @@ -221,13 +223,20 @@ static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); if (t->rx_buf && t->tx_buf) - msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_FD_RW << bs->msg_type_shift); else if (t->rx_buf) - msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT); + msg_ctl |= (SPI_HD_R << bs->msg_type_shift); else if (t->tx_buf) - msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT); - - bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + msg_ctl |= (SPI_HD_W << bs->msg_type_shift); + + switch (bs->msg_ctl_width) { + case 8: + bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL); + break; + case 16: + bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL); + break; + } /* Issue the transfer */ cmd = SPI_CMD_START_IMMEDIATE; @@ -406,9 +415,21 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->transfer_one_message = bcm63xx_spi_transfer_one; master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; + bs->msg_type_shift = pdata->msg_type_shift; + bs->msg_ctl_width = pdata->msg_ctl_width; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); + switch (bs->msg_ctl_width) { + case 8: + case 16: + break; + default: + dev_err(dev, "unsupported MSG_CTL width: %d\n", + bs->msg_ctl_width); + goto out_clk_disable; + } + /* Initialize hardware */ clk_enable(bs->clk); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index 3fe82d0e8ca..5b06d31ab6a 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -166,18 +166,17 @@ static long booke_wdt_ioctl(struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user((void *)arg, &ident, sizeof(ident))) - return -EFAULT; + return copy_to_user(p, &ident, sizeof(ident)) ? -EFAULT : 0; case WDIOC_GETSTATUS: return put_user(0, p); case WDIOC_GETBOOTSTATUS: /* XXX: something is clearing TSR */ tmp = mfspr(SPRN_TSR) & TSR_WRS(3); /* returns CARDRESET if last reset was caused by the WDT */ - return (tmp ? WDIOF_CARDRESET : 0); + return put_user((tmp ? WDIOF_CARDRESET : 0), p); case WDIOC_SETOPTIONS: if (get_user(tmp, p)) - return -EINVAL; + return -EFAULT; if (tmp == WDIOS_ENABLECARD) { booke_wdt_ping(); break; diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c index d4c50d63acb..97ca359ae2b 100644 --- a/drivers/xen/platform-pci.c +++ b/drivers/xen/platform-pci.c @@ -101,19 +101,6 @@ static int platform_pci_resume(struct pci_dev *pdev) return 0; } -static void __devinit prepare_shared_info(void) -{ -#ifdef CONFIG_KEXEC - unsigned long addr; - struct shared_info *hvm_shared_info; - - addr = alloc_xen_mmio(PAGE_SIZE); - hvm_shared_info = ioremap(addr, PAGE_SIZE); - memset(hvm_shared_info, 0, PAGE_SIZE); - xen_hvm_prepare_kexec(hvm_shared_info, addr >> PAGE_SHIFT); -#endif -} - static int __devinit platform_pci_init(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -151,8 +138,6 @@ static int __devinit platform_pci_init(struct pci_dev *pdev, platform_mmio = mmio_addr; platform_mmiolen = mmio_len; - prepare_shared_info(); - if (!xen_have_vector_callback) { ret = xen_allocate_irq(pdev); if (ret) { @@ -73,7 +73,7 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) { unsigned int sz = sizeof(struct bio) + extra_size; struct kmem_cache *slab = NULL; - struct bio_slab *bslab; + struct bio_slab *bslab, *new_bio_slabs; unsigned int i, entry = -1; mutex_lock(&bio_slab_lock); @@ -97,11 +97,12 @@ static struct kmem_cache *bio_find_or_create_slab(unsigned int extra_size) if (bio_slab_nr == bio_slab_max && entry == -1) { bio_slab_max <<= 1; - bio_slabs = krealloc(bio_slabs, - bio_slab_max * sizeof(struct bio_slab), - GFP_KERNEL); - if (!bio_slabs) + new_bio_slabs = krealloc(bio_slabs, + bio_slab_max * sizeof(struct bio_slab), + GFP_KERNEL); + if (!new_bio_slabs) goto out_unlock; + bio_slabs = new_bio_slabs; } if (entry == -1) entry = bio_slab_nr++; diff --git a/fs/block_dev.c b/fs/block_dev.c index 1e519195d45..38e721b35d4 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1578,10 +1578,12 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos) { struct file *file = iocb->ki_filp; + struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); + blk_start_plug(&plug); ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); if (ret > 0 || ret == -EIOCBQUEUED) { ssize_t err; @@ -1590,6 +1592,7 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } + blk_finish_plug(&plug); return ret; } EXPORT_SYMBOL_GPL(blkdev_aio_write); diff --git a/fs/buffer.c b/fs/buffer.c index 9f6d2e41281..58e2e7b7737 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -914,7 +914,7 @@ link_dev_buffers(struct page *page, struct buffer_head *head) /* * Initialise the state of a blockdev page's buffers. */ -static void +static sector_t init_page_buffers(struct page *page, struct block_device *bdev, sector_t block, int size) { @@ -936,33 +936,41 @@ init_page_buffers(struct page *page, struct block_device *bdev, block++; bh = bh->b_this_page; } while (bh != head); + + /* + * Caller needs to validate requested block against end of device. + */ + return end_block; } /* * Create the page-cache page that contains the requested block. * - * This is user purely for blockdev mappings. + * This is used purely for blockdev mappings. */ -static struct page * +static int grow_dev_page(struct block_device *bdev, sector_t block, - pgoff_t index, int size) + pgoff_t index, int size, int sizebits) { struct inode *inode = bdev->bd_inode; struct page *page; struct buffer_head *bh; + sector_t end_block; + int ret = 0; /* Will call free_more_memory() */ page = find_or_create_page(inode->i_mapping, index, (mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS)|__GFP_MOVABLE); if (!page) - return NULL; + return ret; BUG_ON(!PageLocked(page)); if (page_has_buffers(page)) { bh = page_buffers(page); if (bh->b_size == size) { - init_page_buffers(page, bdev, block, size); - return page; + end_block = init_page_buffers(page, bdev, + index << sizebits, size); + goto done; } if (!try_to_free_buffers(page)) goto failed; @@ -982,14 +990,14 @@ grow_dev_page(struct block_device *bdev, sector_t block, */ spin_lock(&inode->i_mapping->private_lock); link_dev_buffers(page, bh); - init_page_buffers(page, bdev, block, size); + end_block = init_page_buffers(page, bdev, index << sizebits, size); spin_unlock(&inode->i_mapping->private_lock); - return page; - +done: + ret = (block < end_block) ? 1 : -ENXIO; failed: unlock_page(page); page_cache_release(page); - return NULL; + return ret; } /* @@ -999,7 +1007,6 @@ failed: static int grow_buffers(struct block_device *bdev, sector_t block, int size) { - struct page *page; pgoff_t index; int sizebits; @@ -1023,22 +1030,14 @@ grow_buffers(struct block_device *bdev, sector_t block, int size) bdevname(bdev, b)); return -EIO; } - block = index << sizebits; + /* Create a page with the proper size buffers.. */ - page = grow_dev_page(bdev, block, index, size); - if (!page) - return 0; - unlock_page(page); - page_cache_release(page); - return 1; + return grow_dev_page(bdev, block, index, size, sizebits); } static struct buffer_head * __getblk_slow(struct block_device *bdev, sector_t block, int size) { - int ret; - struct buffer_head *bh; - /* Size must be multiple of hard sectorsize */ if (unlikely(size & (bdev_logical_block_size(bdev)-1) || (size < 512 || size > PAGE_SIZE))) { @@ -1051,21 +1050,20 @@ __getblk_slow(struct block_device *bdev, sector_t block, int size) return NULL; } -retry: - bh = __find_get_block(bdev, block, size); - if (bh) - return bh; + for (;;) { + struct buffer_head *bh; + int ret; - ret = grow_buffers(bdev, block, size); - if (ret == 0) { - free_more_memory(); - goto retry; - } else if (ret > 0) { bh = __find_get_block(bdev, block, size); if (bh) return bh; + + ret = grow_buffers(bdev, block, size); + if (ret < 0) + return NULL; + if (ret == 0) + free_more_memory(); } - return NULL; } /* @@ -1321,10 +1319,6 @@ EXPORT_SYMBOL(__find_get_block); * which corresponds to the passed block_device, block and size. The * returned buffer has its reference count incremented. * - * __getblk() cannot fail - it just keeps trying. If you pass it an - * illegal block number, __getblk() will happily return a buffer_head - * which represents the non-existent block. Very weird. - * * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers() * attempt is failing. FIXME, perhaps? */ diff --git a/fs/direct-io.c b/fs/direct-io.c index 1faf4cb56f3..f86c720dba0 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -1062,6 +1062,7 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, unsigned long user_addr; size_t bytes; struct buffer_head map_bh = { 0, }; + struct blk_plug plug; if (rw & WRITE) rw = WRITE_ODIRECT; @@ -1177,6 +1178,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, PAGE_SIZE - user_addr / PAGE_SIZE); } + blk_start_plug(&plug); + for (seg = 0; seg < nr_segs; seg++) { user_addr = (unsigned long)iov[seg].iov_base; sdio.size += bytes = iov[seg].iov_len; @@ -1235,6 +1238,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, if (sdio.bio) dio_bio_submit(dio, &sdio); + blk_finish_plug(&plug); + /* * It is possible that, we return short IO due to end of file. * In that case, we need to release all the pages we got hold on. diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 09357508ec9..a2862339323 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1113,6 +1113,11 @@ static void mark_journal_empty(journal_t *journal) BUG_ON(!mutex_is_locked(&journal->j_checkpoint_mutex)); spin_lock(&journal->j_state_lock); + /* Is it already empty? */ + if (sb->s_start == 0) { + spin_unlock(&journal->j_state_lock); + return; + } jbd_debug(1, "JBD: Marking journal as empty (seq %d)\n", journal->j_tail_sequence); diff --git a/fs/logfs/dev_bdev.c b/fs/logfs/dev_bdev.c index df0de27c273..e784a217b50 100644 --- a/fs/logfs/dev_bdev.c +++ b/fs/logfs/dev_bdev.c @@ -26,6 +26,7 @@ static int sync_request(struct page *page, struct block_device *bdev, int rw) struct completion complete; bio_init(&bio); + bio.bi_max_vecs = 1; bio.bi_io_vec = &bio_vec; bio_vec.bv_page = page; bio_vec.bv_len = PAGE_SIZE; @@ -95,12 +96,11 @@ static int __bdev_writeseg(struct super_block *sb, u64 ofs, pgoff_t index, struct address_space *mapping = super->s_mapping_inode->i_mapping; struct bio *bio; struct page *page; - struct request_queue *q = bdev_get_queue(sb->s_bdev); - unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9); + unsigned int max_pages; int i; - if (max_pages > BIO_MAX_PAGES) - max_pages = BIO_MAX_PAGES; + max_pages = min(nr_pages, (size_t) bio_get_nr_vecs(super->s_bdev)); + bio = bio_alloc(GFP_NOFS, max_pages); BUG_ON(!bio); @@ -190,12 +190,11 @@ static int do_erase(struct super_block *sb, u64 ofs, pgoff_t index, { struct logfs_super *super = logfs_super(sb); struct bio *bio; - struct request_queue *q = bdev_get_queue(sb->s_bdev); - unsigned int max_pages = queue_max_hw_sectors(q) >> (PAGE_SHIFT - 9); + unsigned int max_pages; int i; - if (max_pages > BIO_MAX_PAGES) - max_pages = BIO_MAX_PAGES; + max_pages = min(nr_pages, (size_t) bio_get_nr_vecs(super->s_bdev)); + bio = bio_alloc(GFP_NOFS, max_pages); BUG_ON(!bio); diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c index a422f42238b..6984562738d 100644 --- a/fs/logfs/inode.c +++ b/fs/logfs/inode.c @@ -156,10 +156,26 @@ static void __logfs_destroy_inode(struct inode *inode) call_rcu(&inode->i_rcu, logfs_i_callback); } +static void __logfs_destroy_meta_inode(struct inode *inode) +{ + struct logfs_inode *li = logfs_inode(inode); + BUG_ON(li->li_block); + call_rcu(&inode->i_rcu, logfs_i_callback); +} + static void logfs_destroy_inode(struct inode *inode) { struct logfs_inode *li = logfs_inode(inode); + if (inode->i_ino < LOGFS_RESERVED_INOS) { + /* + * The reserved inodes are never destroyed unless we are in + * unmont path. + */ + __logfs_destroy_meta_inode(inode); + return; + } + BUG_ON(list_empty(&li->li_freeing_list)); spin_lock(&logfs_inode_lock); li->li_refcount--; @@ -373,8 +389,8 @@ static void logfs_put_super(struct super_block *sb) { struct logfs_super *super = logfs_super(sb); /* kill the meta-inodes */ - iput(super->s_master_inode); iput(super->s_segfile_inode); + iput(super->s_master_inode); iput(super->s_mapping_inode); } diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c index 1e1c369df22..2a09b8d7398 100644 --- a/fs/logfs/journal.c +++ b/fs/logfs/journal.c @@ -565,7 +565,7 @@ static void write_wbuf(struct super_block *sb, struct logfs_area *area, index = ofs >> PAGE_SHIFT; page_ofs = ofs & (PAGE_SIZE - 1); - page = find_lock_page(mapping, index); + page = find_or_create_page(mapping, index, GFP_NOFS); BUG_ON(!page); memcpy(wbuf, page_address(page) + page_ofs, super->s_writesize); unlock_page(page); diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c index f1cb512c501..5be0abef603 100644 --- a/fs/logfs/readwrite.c +++ b/fs/logfs/readwrite.c @@ -2189,7 +2189,6 @@ void logfs_evict_inode(struct inode *inode) return; } - BUG_ON(inode->i_ino < LOGFS_RESERVED_INOS); page = inode_to_page(inode); BUG_ON(!page); /* FIXME: Use emergency page */ logfs_put_write_page(page); diff --git a/fs/logfs/segment.c b/fs/logfs/segment.c index e28d090c98d..038da099179 100644 --- a/fs/logfs/segment.c +++ b/fs/logfs/segment.c @@ -886,7 +886,7 @@ static struct logfs_area *alloc_area(struct super_block *sb) static void map_invalidatepage(struct page *page, unsigned long l) { - BUG(); + return; } static int map_releasepage(struct page *page, gfp_t g) diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c index cbaf4f8bb7b..4c7bd35b187 100644 --- a/fs/nfsd/nfs4callback.c +++ b/fs/nfsd/nfs4callback.c @@ -651,12 +651,12 @@ static int setup_callback_client(struct nfs4_client *clp, struct nfs4_cb_conn *c if (clp->cl_minorversion == 0) { if (!clp->cl_cred.cr_principal && - (clp->cl_flavor >= RPC_AUTH_GSS_KRB5)) + (clp->cl_cred.cr_flavor >= RPC_AUTH_GSS_KRB5)) return -EINVAL; args.client_name = clp->cl_cred.cr_principal; args.prognumber = conn->cb_prog, args.protocol = XPRT_TRANSPORT_TCP; - args.authflavor = clp->cl_flavor; + args.authflavor = clp->cl_cred.cr_flavor; clp->cl_cb_ident = conn->cb_ident; } else { if (!conn->cb_xprt) diff --git a/fs/nfsd/state.h b/fs/nfsd/state.h index e6173147f98..22bd0a66c35 100644 --- a/fs/nfsd/state.h +++ b/fs/nfsd/state.h @@ -231,7 +231,6 @@ struct nfs4_client { nfs4_verifier cl_verifier; /* generated by client */ time_t cl_time; /* time of last lease renewal */ struct sockaddr_storage cl_addr; /* client ipaddress */ - u32 cl_flavor; /* setclientid pseudoflavor */ struct svc_cred cl_cred; /* setclientid principal */ clientid_t cl_clientid; /* generated by server */ nfs4_verifier cl_confirm; /* generated by server */ diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 36a29b753c7..c495a3055e2 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -1589,10 +1589,10 @@ int __dquot_alloc_space(struct inode *inode, qsize_t number, int flags) goto out; } - down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); for (cnt = 0; cnt < MAXQUOTAS; cnt++) warn[cnt].w_type = QUOTA_NL_NOWARN; + down_read(&sb_dqopt(inode->i_sb)->dqptr_sem); spin_lock(&dq_data_lock); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (!dquots[cnt]) diff --git a/fs/reiserfs/bitmap.c b/fs/reiserfs/bitmap.c index 4c0c7d163d1..a98b7740a0f 100644 --- a/fs/reiserfs/bitmap.c +++ b/fs/reiserfs/bitmap.c @@ -1334,9 +1334,7 @@ struct buffer_head *reiserfs_read_bitmap_block(struct super_block *sb, else if (bitmap == 0) block = (REISERFS_DISK_OFFSET_IN_BYTES >> sb->s_blocksize_bits) + 1; - reiserfs_write_unlock(sb); bh = sb_bread(sb, block); - reiserfs_write_lock(sb); if (bh == NULL) reiserfs_warning(sb, "sh-2029: %s: bitmap block (#%u) " "reading failed", __func__, block); diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index a6d4268fb6c..855da58db14 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -76,10 +76,10 @@ void reiserfs_evict_inode(struct inode *inode) ; } out: + reiserfs_write_unlock_once(inode->i_sb, depth); clear_inode(inode); /* note this must go after the journal_end to prevent deadlock */ dquot_drop(inode); inode->i_blocks = 0; - reiserfs_write_unlock_once(inode->i_sb, depth); return; no_delete: diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h index 8b8cc4e945f..760de723dad 100644 --- a/fs/ubifs/debug.h +++ b/fs/ubifs/debug.h @@ -167,7 +167,7 @@ struct ubifs_global_debug_info { #define ubifs_dbg_msg(type, fmt, ...) \ pr_debug("UBIFS DBG " type ": " fmt "\n", ##__VA_ARGS__) -#define DBG_KEY_BUF_LEN 32 +#define DBG_KEY_BUF_LEN 48 #define ubifs_dbg_msg_key(type, key, fmt, ...) do { \ char __tmp_key_buf[DBG_KEY_BUF_LEN]; \ pr_debug("UBIFS DBG " type ": " fmt "%s\n", ##__VA_ARGS__, \ diff --git a/fs/ubifs/lpt.c b/fs/ubifs/lpt.c index ce33b2beb15..8640920766e 100644 --- a/fs/ubifs/lpt.c +++ b/fs/ubifs/lpt.c @@ -1749,7 +1749,10 @@ int ubifs_lpt_init(struct ubifs_info *c, int rd, int wr) return 0; out_err: - ubifs_lpt_free(c, 0); + if (wr) + ubifs_lpt_free(c, 1); + if (rd) + ubifs_lpt_free(c, 0); return err; } diff --git a/fs/ubifs/recovery.c b/fs/ubifs/recovery.c index c30d976b4be..edeec499c04 100644 --- a/fs/ubifs/recovery.c +++ b/fs/ubifs/recovery.c @@ -788,7 +788,7 @@ struct ubifs_scan_leb *ubifs_recover_leb(struct ubifs_info *c, int lnum, corrupted_rescan: /* Re-scan the corrupted data with verbose messages */ - ubifs_err("corruptio %d", ret); + ubifs_err("corruption %d", ret); ubifs_scan_a_node(c, buf, len, lnum, offs, 1); corrupted: ubifs_scanned_corruption(c, lnum, offs, buf); diff --git a/fs/ubifs/replay.c b/fs/ubifs/replay.c index eba46d4a761..94d78fc5d4e 100644 --- a/fs/ubifs/replay.c +++ b/fs/ubifs/replay.c @@ -1026,7 +1026,6 @@ int ubifs_replay_journal(struct ubifs_info *c) c->replaying = 1; lnum = c->ltail_lnum = c->lhead_lnum; - lnum = UBIFS_LOG_LNUM; do { err = replay_log_leb(c, lnum, 0, c->sbuf); if (err == 1) @@ -1035,7 +1034,7 @@ int ubifs_replay_journal(struct ubifs_info *c) if (err) goto out; lnum = ubifs_next_log_lnum(c, lnum); - } while (lnum != UBIFS_LOG_LNUM); + } while (lnum != c->ltail_lnum); err = replay_buds(c); if (err) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index c3fa6c5327a..71a197f0f93 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1157,9 +1157,6 @@ static int check_free_space(struct ubifs_info *c) * * This function mounts UBIFS file system. Returns zero in case of success and * a negative error code in case of failure. - * - * Note, the function does not de-allocate resources it it fails half way - * through, and the caller has to do this instead. */ static int mount_ubifs(struct ubifs_info *c) { diff --git a/fs/udf/inode.c b/fs/udf/inode.c index fafaad795cd..aa233469b3c 100644 --- a/fs/udf/inode.c +++ b/fs/udf/inode.c @@ -1124,14 +1124,17 @@ int udf_setsize(struct inode *inode, loff_t newsize) if (err) return err; down_write(&iinfo->i_data_sem); - } else + } else { iinfo->i_lenAlloc = newsize; + goto set_size; + } } err = udf_extend_file(inode, newsize); if (err) { up_write(&iinfo->i_data_sem); return err; } +set_size: truncate_setsize(inode, newsize); up_write(&iinfo->i_data_sem); } else { diff --git a/fs/udf/super.c b/fs/udf/super.c index dcbf98722af..18fc038a438 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1344,6 +1344,7 @@ static int udf_load_logicalvol(struct super_block *sb, sector_t block, udf_err(sb, "error loading logical volume descriptor: " "Partition table too long (%u > %lu)\n", table_len, sb->s_blocksize - sizeof(*lvd)); + ret = 1; goto out_bh; } @@ -1388,8 +1389,10 @@ static int udf_load_logicalvol(struct super_block *sb, sector_t block, UDF_ID_SPARABLE, strlen(UDF_ID_SPARABLE))) { if (udf_load_sparable_map(sb, map, - (struct sparablePartitionMap *)gpm) < 0) + (struct sparablePartitionMap *)gpm) < 0) { + ret = 1; goto out_bh; + } } else if (!strncmp(upm2->partIdent.ident, UDF_ID_METADATA, strlen(UDF_ID_METADATA))) { @@ -2000,6 +2003,8 @@ static int udf_fill_super(struct super_block *sb, void *options, int silent) if (!silent) pr_notice("Rescanning with blocksize %d\n", UDF_DEFAULT_BLOCKSIZE); + brelse(sbi->s_lvid_bh); + sbi->s_lvid_bh = NULL; uopt.blocksize = UDF_DEFAULT_BLOCKSIZE; ret = udf_load_vrs(sb, &uopt, silent, &fileset); } diff --git a/fs/xfs/xfs_discard.c b/fs/xfs/xfs_discard.c index f9c3fe304a1..69cf4fcde03 100644 --- a/fs/xfs/xfs_discard.c +++ b/fs/xfs/xfs_discard.c @@ -179,12 +179,14 @@ xfs_ioc_trim( * used by the fstrim application. In the end it really doesn't * matter as trimming blocks is an advisory interface. */ + if (range.start >= XFS_FSB_TO_B(mp, mp->m_sb.sb_dblocks) || + range.minlen > XFS_FSB_TO_B(mp, XFS_ALLOC_AG_MAX_USABLE(mp))) + return -XFS_ERROR(EINVAL); + start = BTOBB(range.start); end = start + BTOBBT(range.len) - 1; minlen = BTOBB(max_t(u64, granularity, range.minlen)); - if (XFS_BB_TO_FSB(mp, start) >= mp->m_sb.sb_dblocks) - return -XFS_ERROR(EINVAL); if (end > XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks) - 1) end = XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks)- 1; diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index 21e37b55f7e..5aceb3f8ecd 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -962,23 +962,22 @@ xfs_dialloc( if (!pag->pagi_freecount && !okalloc) goto nextag; + /* + * Then read in the AGI buffer and recheck with the AGI buffer + * lock held. + */ error = xfs_ialloc_read_agi(mp, tp, agno, &agbp); if (error) goto out_error; - /* - * Once the AGI has been read in we have to recheck - * pagi_freecount with the AGI buffer lock held. - */ if (pag->pagi_freecount) { xfs_perag_put(pag); goto out_alloc; } - if (!okalloc) { - xfs_trans_brelse(tp, agbp); - goto nextag; - } + if (!okalloc) + goto nextag_relse_buffer; + error = xfs_ialloc_ag_alloc(tp, agbp, &ialloced); if (error) { @@ -1007,6 +1006,8 @@ xfs_dialloc( return 0; } +nextag_relse_buffer: + xfs_trans_brelse(tp, agbp); nextag: xfs_perag_put(pag); if (++agno == mp->m_sb.sb_agcount) diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index 92d4331cd4f..ca28a4ba4b5 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -857,7 +857,7 @@ xfs_rtbuf_get( xfs_buf_t *bp; /* block buffer, result */ xfs_inode_t *ip; /* bitmap or summary inode */ xfs_bmbt_irec_t map; - int nmap; + int nmap = 1; int error; /* error value */ ip = issum ? mp->m_rsumip : mp->m_rbmip; diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 4e72a9d4823..4a2ab7c8539 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -601,7 +601,7 @@ static inline void blk_clear_rl_full(struct request_list *rl, bool sync) * it already be started by driver. */ #define RQ_NOMERGE_FLAGS \ - (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA) + (REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA | REQ_DISCARD) #define rq_mergeable(rq) \ (!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \ (((rq)->cmd_flags & REQ_DISCARD) || \ @@ -894,6 +894,8 @@ extern void blk_queue_flush_queueable(struct request_queue *q, bool queueable); extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev); extern int blk_rq_map_sg(struct request_queue *, struct request *, struct scatterlist *); +extern int blk_bio_map_sg(struct request_queue *q, struct bio *bio, + struct scatterlist *sglist); extern void blk_dump_rq_flags(struct request *, char *); extern long nr_blockdev_pages(void); @@ -1139,6 +1141,16 @@ static inline int queue_limit_discard_alignment(struct queue_limits *lim, sector & (lim->discard_granularity - 1); } +static inline int bdev_discard_alignment(struct block_device *bdev) +{ + struct request_queue *q = bdev_get_queue(bdev); + + if (bdev != bdev->bd_contains) + return bdev->bd_part->discard_alignment; + + return q->limits.discard_alignment; +} + static inline unsigned int queue_discard_zeroes_data(struct request_queue *q) { if (q->limits.max_discard_sectors && q->limits.discard_zeroes_data == 1) diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 040b13b5c14..279b1eaa8b7 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -194,6 +194,10 @@ static inline int cpuidle_play_dead(void) {return -ENODEV; } #ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a); +#else +static inline void cpuidle_coupled_parallel_barrier(struct cpuidle_device *dev, atomic_t *a) +{ +} #endif /****************************** diff --git a/include/linux/ktime.h b/include/linux/ktime.h index 603bec2913b..06177ba10a1 100644 --- a/include/linux/ktime.h +++ b/include/linux/ktime.h @@ -58,13 +58,6 @@ union ktime { typedef union ktime ktime_t; /* Kill this */ -#define KTIME_MAX ((s64)~((u64)1 << 63)) -#if (BITS_PER_LONG == 64) -# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) -#else -# define KTIME_SEC_MAX LONG_MAX -#endif - /* * ktime_t definitions when using the 64-bit scalar representation: */ diff --git a/include/linux/mv643xx_eth.h b/include/linux/mv643xx_eth.h index 51bf8ada6dc..49258e0ed1c 100644 --- a/include/linux/mv643xx_eth.h +++ b/include/linux/mv643xx_eth.h @@ -15,6 +15,8 @@ #define MV643XX_ETH_SIZE_REG_4 0x2224 #define MV643XX_ETH_BASE_ADDR_ENABLE_REG 0x2290 +#define MV643XX_TX_CSUM_DEFAULT_LIMIT 0 + struct mv643xx_eth_shared_platform_data { struct mbus_dram_target_info *dram; struct platform_device *shared_smi; diff --git a/include/linux/time.h b/include/linux/time.h index c81c5e40fcb..b0bbd8f0130 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -107,11 +107,29 @@ static inline struct timespec timespec_sub(struct timespec lhs, return ts_delta; } +#define KTIME_MAX ((s64)~((u64)1 << 63)) +#if (BITS_PER_LONG == 64) +# define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) +#else +# define KTIME_SEC_MAX LONG_MAX +#endif + /* * Returns true if the timespec is norm, false if denorm: */ -#define timespec_valid(ts) \ - (((ts)->tv_sec >= 0) && (((unsigned long) (ts)->tv_nsec) < NSEC_PER_SEC)) +static inline bool timespec_valid(const struct timespec *ts) +{ + /* Dates before 1970 are bogus */ + if (ts->tv_sec < 0) + return false; + /* Can't have more nanoseconds then a second */ + if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) + return false; + /* Disallow values that could overflow ktime_t */ + if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) + return false; + return true; +} extern void read_persistent_clock(struct timespec *ts); extern void read_boot_clock(struct timespec *ts); diff --git a/include/xen/events.h b/include/xen/events.h index 9c641deb65d..04399b28e82 100644 --- a/include/xen/events.h +++ b/include/xen/events.h @@ -58,8 +58,6 @@ void notify_remote_via_irq(int irq); void xen_irq_resume(void); -void xen_hvm_prepare_kexec(struct shared_info *sip, unsigned long pfn); - /* Clear an irq's pending state, in preparation for polling on it */ void xen_clear_irq_pending(int irq); void xen_set_irq_pending(int irq); diff --git a/kernel/fork.c b/kernel/fork.c index 3bd2280d79f..2c8857e1285 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -455,8 +455,8 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm) if (retval) goto out; - if (file && uprobe_mmap(tmp)) - goto out; + if (file) + uprobe_mmap(tmp); } /* a new mm has just been created */ arch_dup_mmap(oldmm, mm); diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index e16af197a2b..0c1485e42be 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -115,6 +115,7 @@ static void tk_xtime_add(struct timekeeper *tk, const struct timespec *ts) { tk->xtime_sec += ts->tv_sec; tk->xtime_nsec += (u64)ts->tv_nsec << tk->shift; + tk_normalize_xtime(tk); } static void tk_set_wall_to_mono(struct timekeeper *tk, struct timespec wtm) @@ -276,7 +277,7 @@ static void timekeeping_forward_now(struct timekeeper *tk) tk->xtime_nsec += cycle_delta * tk->mult; /* If arch requires, add in gettimeoffset() */ - tk->xtime_nsec += arch_gettimeoffset() << tk->shift; + tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift; tk_normalize_xtime(tk); @@ -427,7 +428,7 @@ int do_settimeofday(const struct timespec *tv) struct timespec ts_delta, xt; unsigned long flags; - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + if (!timespec_valid(tv)) return -EINVAL; write_seqlock_irqsave(&tk->lock, flags); @@ -463,6 +464,8 @@ int timekeeping_inject_offset(struct timespec *ts) { struct timekeeper *tk = &timekeeper; unsigned long flags; + struct timespec tmp; + int ret = 0; if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return -EINVAL; @@ -471,10 +474,17 @@ int timekeeping_inject_offset(struct timespec *ts) timekeeping_forward_now(tk); + /* Make sure the proposed value is valid */ + tmp = timespec_add(tk_xtime(tk), *ts); + if (!timespec_valid(&tmp)) { + ret = -EINVAL; + goto error; + } tk_xtime_add(tk, ts); tk_set_wall_to_mono(tk, timespec_sub(tk->wall_to_monotonic, *ts)); +error: /* even if we error out, we forwarded the time, so call update */ timekeeping_update(tk, true); write_sequnlock_irqrestore(&tk->lock, flags); @@ -482,7 +492,7 @@ int timekeeping_inject_offset(struct timespec *ts) /* signal hrtimers about time change */ clock_was_set(); - return 0; + return ret; } EXPORT_SYMBOL(timekeeping_inject_offset); @@ -649,7 +659,20 @@ void __init timekeeping_init(void) struct timespec now, boot, tmp; read_persistent_clock(&now); + if (!timespec_valid(&now)) { + pr_warn("WARNING: Persistent clock returned invalid value!\n" + " Check your CMOS/BIOS settings.\n"); + now.tv_sec = 0; + now.tv_nsec = 0; + } + read_boot_clock(&boot); + if (!timespec_valid(&boot)) { + pr_warn("WARNING: Boot clock returned invalid value!\n" + " Check your CMOS/BIOS settings.\n"); + boot.tv_sec = 0; + boot.tv_nsec = 0; + } seqlock_init(&tk->lock); @@ -1129,6 +1152,10 @@ static void update_wall_time(void) offset = (clock->read(clock) - clock->cycle_last) & clock->mask; #endif + /* Check if there's really nothing to do */ + if (offset < tk->cycle_interval) + goto out; + /* * With NO_HZ we may have to accumulate many cycle_intervals * (think "ticks") worth of time at once. To do this efficiently, @@ -1161,9 +1188,9 @@ static void update_wall_time(void) * the vsyscall implementations are converted to use xtime_nsec * (shifted nanoseconds), this can be killed. */ - remainder = tk->xtime_nsec & ((1 << tk->shift) - 1); + remainder = tk->xtime_nsec & ((1ULL << tk->shift) - 1); tk->xtime_nsec -= remainder; - tk->xtime_nsec += 1 << tk->shift; + tk->xtime_nsec += 1ULL << tk->shift; tk->ntp_error += remainder << tk->ntp_error_shift; /* diff --git a/kernel/trace/trace_syscalls.c b/kernel/trace/trace_syscalls.c index 60e4d787567..6b245f64c8d 100644 --- a/kernel/trace/trace_syscalls.c +++ b/kernel/trace/trace_syscalls.c @@ -506,6 +506,8 @@ static void perf_syscall_enter(void *ignore, struct pt_regs *regs, long id) int size; syscall_nr = syscall_get_nr(current, regs); + if (syscall_nr < 0) + return; if (!test_bit(syscall_nr, enabled_perf_enter_syscalls)) return; @@ -580,6 +582,8 @@ static void perf_syscall_exit(void *ignore, struct pt_regs *regs, long ret) int size; syscall_nr = syscall_get_nr(current, regs); + if (syscall_nr < 0) + return; if (!test_bit(syscall_nr, enabled_perf_exit_syscalls)) return; diff --git a/mm/filemap.c b/mm/filemap.c index fa5ca304148..384344575c3 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1412,12 +1412,8 @@ generic_file_aio_read(struct kiocb *iocb, const struct iovec *iov, retval = filemap_write_and_wait_range(mapping, pos, pos + iov_length(iov, nr_segs) - 1); if (!retval) { - struct blk_plug plug; - - blk_start_plug(&plug); retval = mapping->a_ops->direct_IO(READ, iocb, iov, pos, nr_segs); - blk_finish_plug(&plug); } if (retval > 0) { *ppos = pos + retval; @@ -2527,14 +2523,12 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov, { struct file *file = iocb->ki_filp; struct inode *inode = file->f_mapping->host; - struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); sb_start_write(inode->i_sb); mutex_lock(&inode->i_mutex); - blk_start_plug(&plug); ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); mutex_unlock(&inode->i_mutex); @@ -2545,7 +2539,6 @@ ssize_t generic_file_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } - blk_finish_plug(&plug); sb_end_write(inode->i_sb); return ret; } diff --git a/mm/mmap.c b/mm/mmap.c index 9adee9fc0d8..ae18a48e7e4 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1356,9 +1356,8 @@ out: } else if ((flags & MAP_POPULATE) && !(flags & MAP_NONBLOCK)) make_pages_present(addr, addr + len); - if (file && uprobe_mmap(vma)) - /* matching probes but cannot insert */ - goto unmap_and_free_vma; + if (file) + uprobe_mmap(vma); return addr; diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index 88f2bf67196..bac973a3136 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -316,7 +316,6 @@ static bool svc_xprt_has_something_to_do(struct svc_xprt *xprt) */ void svc_xprt_enqueue(struct svc_xprt *xprt) { - struct svc_serv *serv = xprt->xpt_server; struct svc_pool *pool; struct svc_rqst *rqstp; int cpu; @@ -362,8 +361,6 @@ void svc_xprt_enqueue(struct svc_xprt *xprt) rqstp, rqstp->rq_xprt); rqstp->rq_xprt = xprt; svc_xprt_get(xprt); - rqstp->rq_reserved = serv->sv_max_mesg; - atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); pool->sp_stats.threads_woken++; wake_up(&rqstp->rq_wait); } else { @@ -640,8 +637,6 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) if (xprt) { rqstp->rq_xprt = xprt; svc_xprt_get(xprt); - rqstp->rq_reserved = serv->sv_max_mesg; - atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); /* As there is a shortage of threads and this request * had to be queued, don't allow the thread to wait so @@ -738,6 +733,8 @@ int svc_recv(struct svc_rqst *rqstp, long timeout) else len = xprt->xpt_ops->xpo_recvfrom(rqstp); dprintk("svc: got len=%d\n", len); + rqstp->rq_reserved = serv->sv_max_mesg; + atomic_add(rqstp->rq_reserved, &xprt->xpt_reserved); } svc_xprt_received(xprt); @@ -794,7 +791,8 @@ int svc_send(struct svc_rqst *rqstp) /* Grab mutex to serialize outgoing data. */ mutex_lock(&xprt->xpt_mutex); - if (test_bit(XPT_DEAD, &xprt->xpt_flags)) + if (test_bit(XPT_DEAD, &xprt->xpt_flags) + || test_bit(XPT_CLOSE, &xprt->xpt_flags)) len = -ENOTCONN; else len = xprt->xpt_ops->xpo_sendto(rqstp); diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 18bc130255a..998aa8c1807 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1129,9 +1129,9 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (len >= 0) svsk->sk_tcplen += len; if (len != want) { + svc_tcp_save_pages(svsk, rqstp); if (len < 0 && len != -EAGAIN) goto err_other; - svc_tcp_save_pages(svsk, rqstp); dprintk("svc: incomplete TCP record (%d of %d)\n", svsk->sk_tcplen, svsk->sk_reclen); goto err_noclose; diff --git a/tools/perf/util/python-ext-sources b/tools/perf/util/python-ext-sources index 2884e67ee62..213362850ab 100644 --- a/tools/perf/util/python-ext-sources +++ b/tools/perf/util/python-ext-sources @@ -10,10 +10,12 @@ util/ctype.c util/evlist.c util/evsel.c util/cpumap.c +util/hweight.c util/thread_map.c util/util.c util/xyarray.c util/cgroup.c util/debugfs.c +util/rblist.c util/strlist.c ../../lib/rbtree.c |