diff options
90 files changed, 3003 insertions, 1245 deletions
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig index b2038b0e266..813cfb366c1 100644 --- a/arch/arm/configs/mx27_defconfig +++ b/arch/arm/configs/mx27_defconfig @@ -21,8 +21,14 @@ CONFIG_ARCH_MX2=y CONFIG_MACH_MX27=y CONFIG_MACH_MX27ADS=y CONFIG_MACH_PCM038=y +CONFIG_MACH_CPUIMX27=y +CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y +CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y +CONFIG_MACH_IMX27_VISSTRIM_M10=y CONFIG_MACH_IMX27LITE=y +CONFIG_MACH_PCA100=y +CONFIG_MACH_MXT_TD60=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -76,7 +82,9 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m # CONFIG_SERIO is not set +CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_LEGACY_PTYS is not set @@ -85,19 +93,20 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y CONFIG_SPI=y -CONFIG_SPI_BITBANG=y +CONFIG_SPI_IMX=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y # CONFIG_HWMON is not set CONFIG_FB=y CONFIG_FB_IMX=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=m +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_RTC_CLASS=y diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig deleted file mode 100644 index 2d29329749e..00000000000 --- a/arch/arm/configs/mx31pdk_defconfig +++ /dev/null @@ -1,44 +0,0 @@ -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_COMPAT_BRK is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_MXC=y -# CONFIG_MACH_MX31ADS is not set -CONFIG_MACH_MX31_3DS=y -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_LRO is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -# CONFIG_FIRMWARE_IN_KERNEL is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_DNOTIFY is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 161f907b611..f0c339fd5d2 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -24,6 +24,7 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y @@ -108,7 +109,6 @@ CONFIG_MMC=y CONFIG_MMC_MXC=y CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index a665ecbbe2b..163cfee7644 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -15,6 +15,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_ARCH_MXC=y CONFIG_ARCH_MX5=y CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX51_3DS=y +CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT_VOLUNTARY=y @@ -69,7 +71,6 @@ CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=y CONFIG_STE10XP=y CONFIG_LSI_ET1011C_PHY=y -CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_NET_ETHERNET=y @@ -100,7 +101,6 @@ CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_EHCI_HCD=y @@ -117,13 +117,11 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y -CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set @@ -136,6 +134,7 @@ CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y +CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=m CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -151,7 +150,6 @@ CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -159,7 +157,6 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_ARM_UNWIND is not set CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_KEYS=y CONFIG_SECURITYFS=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c5c0369bb48..9b45f1f523f 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -146,8 +146,8 @@ choice default MACH_EUKREA_MBIMX27_BASEBOARD config MACH_EUKREA_MBIMX27_BASEBOARD - prompt "Eukrea MBIMX27 development board" - bool + bool "Eukrea MBIMX27 development board" + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SPI_IMX help @@ -163,6 +163,15 @@ config MACH_MX27_3DS Include support for MX27PDK platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX27_VISSTRIM_M10 + bool "Vista Silicon i.MX27 Visstrim_m10" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Visstrim_m10 platform and its different variants. + This includes specific configurations for the board and its + peripherals. + config MACH_IMX27LITE bool "LogicPD MX27 LITEKIT platform" select IMX_HAVE_PLATFORM_IMX_UART @@ -173,6 +182,7 @@ config MACH_IMX27LITE config MACH_PCA100 bool "Phytec phyCARD-s (pca100)" select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_SPI_IMX diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 46a9fdfbbd1..5582692bb17 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o +obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += mach-pca100.o diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index c05096c3830..daca30b2d5b 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -592,7 +592,7 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, spi_clk) + _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "mshc", mshc_clk) diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index bb419ef4d13..cf15ea516a7 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1172,9 +1172,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0]) _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0]) _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1]) - _REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0]) - _REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1]) - _REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2]) + _REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0]) + _REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1]) + _REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2]) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0]) _REGISTER_CLOCK(NULL, "csi", csi_clk[0]) _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0]) diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 5a1aa15c8a1..98a25bada78 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -594,27 +594,27 @@ DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk); DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk); /* Clocks we cannot directly gate, but drivers need their rates */ -DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk); -DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk); -DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk); -DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk); -DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk); -DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk); -DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk); -DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk); -DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk); -DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk); -DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk); -DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk); -DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk); -DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk); -DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk); -DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk); -DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk); -DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk); -DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk); -DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk); -DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); +DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk); +DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk); +DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk); +DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk); +DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk); +DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk); +DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk); +DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk); +DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk); +DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk); +DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk); +DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk); +DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk); +DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk); +DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk); +DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk); +DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk); +DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk); +DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk); +DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk); +DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -640,9 +640,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h index a8d94f07819..81979486218 100644 --- a/arch/arm/mach-imx/devices-imx1.h +++ b/arch/arm/mach-imx/devices-imx1.h @@ -9,10 +9,12 @@ #include <mach/mx1.h> #include <mach/devices-common.h> -#define imx1_add_i2c_imx(pdata) \ - imx_add_imx_i2c(0, MX1_I2C_BASE_ADDR, SZ_4K, MX1_INT_I2C, pdata) +extern const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst; +#define imx1_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) -#define imx1_add_imx_uart0(pdata) \ - imx_add_imx_uart_3irq(0, MX1_UART1_BASE_ADDR, 0xd0, MX1_INT_UART1RX, MX1_INT_UART1TX, MX1_INT_UART1RTS, pdata) -#define imx1_add_imx_uart1(pdata) \ - imx_add_imx_uart_3irq(0, MX1_UART2_BASE_ADDR, 0xd0, MX1_INT_UART2RX, MX1_INT_UART2TX, MX1_INT_UART2RTS, pdata) +extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst; +#define imx1_add_imx_uart(id, pdata) \ + imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) +#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) +#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 42788e99d12..d189039749b 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -9,22 +9,28 @@ #include <mach/mx21.h> #include <mach/devices-common.h> -#define imx21_add_i2c_imx(pdata) \ - imx_add_imx_i2c(0, MX2x_I2C_BASE_ADDR, SZ_4K, MX2x_INT_I2C, pdata) +extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst; +#define imx21_add_imx_i2c(pdata) \ + imx_add_imx_i2c(&imx21_imx_i2c_data, pdata) -#define imx21_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX21_UART1_BASE_ADDR, SZ_4K, MX21_INT_UART1, pdata) -#define imx21_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX21_UART2_BASE_ADDR, SZ_4K, MX21_INT_UART2, pdata) -#define imx21_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX21_UART3_BASE_ADDR, SZ_4K, MX21_INT_UART3, pdata) -#define imx21_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX21_UART4_BASE_ADDR, SZ_4K, MX21_INT_UART4, pdata) +extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst; +#define imx21_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst; +#define imx21_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx21_imx_uart_data[id], pdata) +#define imx21_add_imx_uart0(pdata) imx21_add_imx_uart(0, pdata) +#define imx21_add_imx_uart1(pdata) imx21_add_imx_uart(1, pdata) +#define imx21_add_imx_uart2(pdata) imx21_add_imx_uart(2, pdata) +#define imx21_add_imx_uart3(pdata) imx21_add_imx_uart(3, pdata) + +extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst; #define imx21_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX21_NFC_BASE_ADDR, MX21_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) -#define imx21_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX21_CSPI1_BASE_ADDR, SZ_4K, MX21_INT_CSPI1, pdata) -#define imx21_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX21_CSPI2_BASE_ADDR, SZ_4K, MX21_INT_CSPI2, pdata) +extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst; +#define imx21_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx21_cspi_data[id], pdata) +#define imx21_add_spi_imx0(pdata) imx21_add_cspi(0, pdata) +#define imx21_add_spi_imx1(pdata) imx21_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 65e7bb7ec2e..7011690364f 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -9,30 +9,35 @@ #include <mach/mx27.h> #include <mach/devices-common.h> -#define imx27_add_i2c_imx0(pdata) \ - imx_add_imx_i2c(0, MX27_I2C1_BASE_ADDR, SZ_4K, MX27_INT_I2C1, pdata) -#define imx27_add_i2c_imx1(pdata) \ - imx_add_imx_i2c(1, MX27_I2C2_BASE_ADDR, SZ_4K, MX27_INT_I2C2, pdata) +extern const struct imx_fec_data imx27_fec_data __initconst; +#define imx27_add_fec(pdata) \ + imx_add_fec(&imx27_fec_data, pdata) -#define imx27_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX27_UART1_BASE_ADDR, SZ_4K, MX27_INT_UART1, pdata) -#define imx27_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX27_UART2_BASE_ADDR, SZ_4K, MX27_INT_UART2, pdata) -#define imx27_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX27_UART3_BASE_ADDR, SZ_4K, MX27_INT_UART3, pdata) -#define imx27_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX27_UART4_BASE_ADDR, SZ_4K, MX27_INT_UART4, pdata) -#define imx27_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX27_UART5_BASE_ADDR, SZ_4K, MX27_INT_UART5, pdata) -#define imx27_add_imx_uart5(pdata) \ - imx_add_imx_uart_1irq(5, MX27_UART6_BASE_ADDR, SZ_4K, MX27_INT_UART6, pdata) +extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst; +#define imx27_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata) +extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst; +#define imx27_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst; +#define imx27_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx27_imx_uart_data[id], pdata) +#define imx27_add_imx_uart0(pdata) imx27_add_imx_uart(0, pdata) +#define imx27_add_imx_uart1(pdata) imx27_add_imx_uart(1, pdata) +#define imx27_add_imx_uart2(pdata) imx27_add_imx_uart(2, pdata) +#define imx27_add_imx_uart3(pdata) imx27_add_imx_uart(3, pdata) +#define imx27_add_imx_uart4(pdata) imx27_add_imx_uart(4, pdata) +#define imx27_add_imx_uart5(pdata) imx27_add_imx_uart(5, pdata) + +extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst; #define imx27_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX27_NFC_BASE_ADDR, MX27_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) -#define imx27_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX27_CSPI1_BASE_ADDR, SZ_4K, MX27_INT_CSPI1, pdata) -#define imx27_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX27_CSPI2_BASE_ADDR, SZ_4K, MX27_INT_CSPI2, pdata) -#define imx27_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX27_CSPI3_BASE_ADDR, SZ_4K, MX27_INT_CSPI3, pdata) +extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst; +#define imx27_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx27_cspi_data[id], pdata) +#define imx27_add_spi_imx0(pdata) imx27_add_cspi(0, pdata) +#define imx27_add_spi_imx1(pdata) imx27_add_cspi(1, pdata) +#define imx27_add_spi_imx2(pdata) imx27_add_cspi(2, pdata) diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c index 9c271a752b8..fba5047de8b 100644 --- a/arch/arm/mach-imx/devices.c +++ b/arch/arm/mach-imx/devices.c @@ -314,27 +314,6 @@ struct platform_device mxc_fb_device = { }, }; -#ifdef CONFIG_MACH_MX27 -static struct resource mxc_fec_resources[] = { - { - .start = MX27_FEC_BASE_ADDR, - .end = MX27_FEC_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX27_INT_FEC, - .end = MX27_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; -#endif - static struct resource mxc_pwm_resources[] = { { .start = MX2x_PWM_BASE_ADDR, @@ -480,41 +459,6 @@ struct platform_device mxc_usbh2 = { }; #endif -#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \ - { \ - .name = _name, \ - .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \ - .flags = IORESOURCE_DMA, \ - } - -#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \ - static struct resource imx_ssi_resources ## n[] = { \ - { \ - .start = MX2x_SSI ## ssin ## _BASE_ADDR, \ - .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \ - .flags = IORESOURCE_MEM, \ - }, { \ - .start = MX2x_INT_SSI1, \ - .end = MX2x_INT_SSI1, \ - .flags = IORESOURCE_IRQ, \ - }, \ - DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \ - DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \ - DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \ - DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \ - }; \ - \ - struct platform_device imx_ssi_device ## n = { \ - .name = "imx-ssi", \ - .id = n, \ - .num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \ - .resource = imx_ssi_resources ## n, \ - } - -DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); -DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1); - /* GPIO port description */ #define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \ { \ diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h index efd4527506a..807f02a031c 100644 --- a/arch/arm/mach-imx/devices.h +++ b/arch/arm/mach-imx/devices.h @@ -16,7 +16,6 @@ extern struct platform_device mxc_gpt5; extern struct platform_device mxc_wdt; extern struct platform_device mxc_w1_master_device; extern struct platform_device mxc_fb_device; -extern struct platform_device mxc_fec_device; extern struct platform_device mxc_pwm_device; extern struct platform_device mxc_sdhc_device0; extern struct platform_device mxc_sdhc_device1; @@ -26,7 +25,5 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mx21_usbhc_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; extern struct platform_device imx_kpp_device; #endif diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 4edc5f43920..026263c665c 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -36,13 +36,12 @@ #include <mach/hardware.h> #include <mach/mmc.h> #include <mach/spi.h> -#include <mach/ssi.h> #include <mach/audmux.h> #include "devices-imx27.h" #include "devices.h" -static int eukrea_mbimx27_pins[] = { +static const int eukrea_mbimx27_pins[] __initconst = { /* UART2 */ PE3_PF_UART2_CTS, PE4_PF_UART2_RTS, @@ -311,7 +310,8 @@ static struct imxmmc_platform_data sdhc_pdata = { .dat3_card_detect = 1, }; -struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE, }; @@ -357,7 +357,7 @@ void __init eukrea_mbimx27_baseboard_init(void) i2c_register_board_info(0, eukrea_mbimx27_i2c_devices, ARRAY_SIZE(eukrea_mbimx27_i2c_devices)); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimx27_ssi_pdata); + imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata); #if defined(CONFIG_TOUCHSCREEN_ADS7846) \ || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 339150ab0ea..28f73a1c79f 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -46,7 +46,7 @@ #include "devices-imx27.h" #include "devices.h" -static int eukrea_cpuimx27_pins[] = { +static const int eukrea_cpuimx27_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -157,7 +157,6 @@ cpuimx27_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &eukrea_cpuimx27_nor_mtd_device, - &mxc_fec_device, &mxc_wdt, &mxc_w1_master_device, }; @@ -259,8 +258,9 @@ static void __init eukrea_cpuimx27_init(void) i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - imx27_add_i2c_imx1(&cpuimx27_i2c1_data); + imx27_add_imx_i2c(1, &cpuimx27_i2c1_data); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c new file mode 100644 index 00000000000..a0d78faa08e --- /dev/null +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -0,0 +1,263 @@ +/* + * mach-imx27_visstrim_m10.c + * + * Copyright 2010 Javier Martin <javier.martin@vista-silicon.com> + * + * Based on mach-pcm038.c, mach-pca100.c, mach-mx27ads.c and others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <mach/common.h> +#include <mach/mmc.h> +#include <mach/iomux.h> +#include <mach/mxc_ehci.h> + +#include "devices-imx27.h" +#include "devices.h" + +#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) +#define SDHC1_IRQ IRQ_GPIOB(25) + +static const int visstrim_m10_pins[] __initconst = { + /* UART1 (console) */ + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PE14_PF_UART1_CTS, + PE15_PF_UART1_RTS, + /* FEC */ + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_RX_CLK, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + /* SDHC1 */ + PE18_PF_SD1_D0, + PE19_PF_SD1_D1, + PE20_PF_SD1_D2, + PE21_PF_SD1_D3, + PE22_PF_SD1_CMD, + PE23_PF_SD1_CLK, + /* Both I2Cs */ + PD17_PF_I2C_DATA, + PD18_PF_I2C_CLK, + PC5_PF_I2C2_SDA, + PC6_PF_I2C2_SCL, + /* USB OTG */ + OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT, + PC9_PF_USBOTG_DATA0, + PC11_PF_USBOTG_DATA1, + PC10_PF_USBOTG_DATA2, + PC13_PF_USBOTG_DATA3, + PC12_PF_USBOTG_DATA4, + PC7_PF_USBOTG_DATA5, + PC8_PF_USBOTG_DATA6, + PE25_PF_USBOTG_DATA7, + PE24_PF_USBOTG_CLK, + PE2_PF_USBOTG_DIR, + PE0_PF_USBOTG_NXT, + PE1_PF_USBOTG_STP, + PB23_PF_USB_PWR, + PB24_PF_USB_OC, +}; + +/* GPIOs used as events for applications */ +static struct gpio_keys_button visstrim_gpio_keys[] = { + { + .type = EV_KEY, + .code = KEY_RESTART, + .gpio = (GPIO_PORTC + 15), + .desc = "Default config", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_RECORD, + .gpio = (GPIO_PORTF + 14), + .desc = "Record", + .active_low = 0, + .wakeup = 1, + }, + { + .type = EV_KEY, + .code = KEY_STOP, + .gpio = (GPIO_PORTF + 13), + .desc = "Stop", + .active_low = 0, + .wakeup = 1, + } +}; + +static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = { + .buttons = visstrim_gpio_keys, + .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), +}; + +static struct platform_device visstrim_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &visstrim_gpio_keys_platform_data, + }, +}; + +/* Visstrim_SM10 has a microSD slot connected to sdhc1 */ +static int visstrim_m10_sdhc1_init(struct device *dev, + irq_handler_t detect_irq, void *data) +{ + int ret; + + ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING, + "mmc-detect", data); + return ret; +} + +static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) +{ + free_irq(SDHC1_IRQ, data); +} + +static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = { + .init = visstrim_m10_sdhc1_init, + .exit = visstrim_m10_sdhc1_exit, +}; + +/* Visstrim_SM10 NOR flash */ +static struct physmap_flash_data visstrim_m10_flash_data = { + .width = 2, +}; + +static struct resource visstrim_m10_flash_resource = { + .start = 0xc0000000, + .end = 0xc0000000 + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device visstrim_m10_nor_mtd_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &visstrim_m10_flash_data, + }, + .num_resources = 1, + .resource = &visstrim_m10_flash_resource, +}; + +static struct platform_device *platform_devices[] __initdata = { + &visstrim_gpio_keys_device, + &visstrim_m10_nor_mtd_device, +}; + +/* Visstrim_M10 uses UART0 as console */ +static const struct imxuart_platform_data uart_pdata __initconst = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +/* I2C */ +static const struct imxi2c_platform_data visstrim_m10_i2c_data __initconst = { + .bitrate = 100000, +}; + +static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { + .gpio_base = 240, /* After MX27 internal GPIOs */ + .invert = 0, +}; + +static struct i2c_board_info visstrim_m10_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &visstrim_m10_pca9555_pdata, + }, +}; + +/* USB OTG */ +static int otg_phy_init(struct platform_device *pdev) +{ + gpio_set_value(OTG_PHY_CS_GPIO, 0); + return 0; +} + +static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = { + .init = otg_phy_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED, +}; + +static void __init visstrim_m10_board_init(void) +{ + int ret; + + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, + ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); + if (ret) + pr_err("Failed to setup pins (%d)\n", ret); + + imx27_add_imx_uart0(&uart_pdata); + + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); + imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata); + mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata); + imx27_add_fec(NULL); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); +} + +static void __init visstrim_m10_timer_init(void) +{ + mx27_clocks_init((unsigned long)25000000); +} + +static struct sys_timer visstrim_m10_timer = { + .init = visstrim_m10_timer_init, +}; + +MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") + .phys_io = MX27_AIPI_BASE_ADDR, + .io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX27_PHYS_OFFSET + 0x100, + .map_io = mx27_map_io, + .init_irq = mx27_init_irq, + .init_machine = visstrim_m10_board_init, + .timer = &visstrim_m10_timer, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 22a2b5d9121..60d4d0ac493 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -27,7 +27,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mx27lite_pins[] = { +static const int mx27lite_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -58,16 +58,12 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_fec_device, -}; - static void __init mx27lite_init(void) { mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_fec(NULL); } static void __init mx27lite_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 77a760cfadc..85e2877572b 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -32,7 +32,7 @@ #include "devices-imx1.h" #include "devices.h" -static int mx1ads_pins[] = { +static const int mx1ads_pins[] __initconst = { /* UART1 */ PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, @@ -131,7 +131,7 @@ static void __init mx1ads_init(void) i2c_register_board_info(0, mx1ads_i2c_devices, ARRAY_SIZE(mx1ads_i2c_devices)); - imx1_add_i2c_imx(&mx1ads_i2c_data); + imx1_add_imx_i2c(&mx1ads_i2c_data); } static void __init mx1ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 96d7f8189f3..7f021e6f6ac 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -67,7 +67,7 @@ #define MX21ADS_IO_LED4_ON 0x4000 #define MX21ADS_IO_LED3_ON 0x8000 -static unsigned int mx21ads_pins[] = { +static const int mx21ads_pins[] __initconst = { /* CS8900A */ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11), diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index e66ffaa1c26..a69dba25265 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -33,7 +33,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mx27pdk_pins[] = { +static const int mx27pdk_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -64,10 +64,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_fec_device, -}; - /* * Matrix keyboard */ @@ -94,7 +90,7 @@ static void __init mx27pdk_init(void) mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); imx27_add_imx_uart0(&uart_pdata); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_fec(NULL); mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data); } diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 9c77da98a10..ffb39a42f24 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -66,7 +66,7 @@ /* to determine the correct external crystal reference */ #define CKIH_27MHZ_BIT_SET (1 << 3) -static unsigned int mx27ads_pins[] = { +static const int mx27ads_pins[] __initconst = { /* UART0 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -284,7 +284,6 @@ static struct imxmmc_platform_data sdhc2_pdata = { static struct platform_device *platform_devices[] __initdata = { &mx27ads_nor_mtd_device, - &mxc_fec_device, &mxc_w1_master_device, }; @@ -308,11 +307,12 @@ static void __init mx27ads_board_init(void) /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, mx27ads_i2c_devices, ARRAY_SIZE(mx27ads_i2c_devices)); - imx27_add_i2c_imx1(&mx27ads_i2c1_data); + imx27_add_imx_i2c(1, &mx27ads_i2c1_data); mxc_register_device(&mxc_fb_device, &mx27ads_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index a3a1e452d4c..f4c397dec79 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -37,7 +37,7 @@ #include "devices-imx27.h" #include "devices.h" -static unsigned int mxt_td60_pins[] __initdata = { +static const int mxt_td60_pins[] __initconst = { /* UART0 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -231,10 +231,6 @@ static struct imxmmc_platform_data sdhc1_pdata = { .exit = mxt_td60_sdhc1_exit, }; -static struct platform_device *platform_devices[] __initdata = { - &mxc_fec_device, -}; - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -255,12 +251,11 @@ static void __init mxt_td60_board_init(void) i2c_register_board_info(1, mxt_td60_i2c2_devices, ARRAY_SIZE(mxt_td60_i2c2_devices)); - imx27_add_i2c_imx0(&mxt_td60_i2c0_data); - imx27_add_i2c_imx1(&mxt_td60_i2c1_data); + imx27_add_imx_i2c(0, &mxt_td60_i2c0_data); + imx27_add_imx_i2c(1, &mxt_td60_i2c1_data); mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data); mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx27_add_fec(NULL); } static void __init mxt_td60_timer_init(void) diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index 23c9e1f37b9..223c31c48db 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -38,7 +38,6 @@ #include <mach/iomux-mx27.h> #include <asm/mach/time.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include <mach/mxc_nand.h> #include <mach/irqs.h> #include <mach/mmc.h> @@ -55,7 +54,7 @@ #define SPI1_SS1 (GPIO_PORTD + 27) #define SD2_CD (GPIO_PORTC + 29) -static int pca100_pins[] = { +static const int pca100_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -174,7 +173,6 @@ pca100_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &mxc_w1_master_device, - &mxc_fec_device, &mxc_wdt, }; @@ -193,11 +191,9 @@ static struct i2c_board_info pca100_i2c_devices[] = { I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */ .platform_data = &board_eeprom, }, { - I2C_BOARD_INFO("rtc-pcf8563", 0x51), - .type = "pcf8563" + I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("lm75", 0x4a), - .type = "lm75" } }; @@ -252,7 +248,7 @@ static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) msleep(2); } -static struct imx_ssi_platform_data pca100_ssi_pdata = { +static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { .ac97_reset = pca100_ac97_cold_reset, .ac97_warm_reset = pca100_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -389,7 +385,7 @@ static void __init pca100_init(void) if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); - mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata); + imx27_add_imx_ssi(0, &pca100_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); @@ -401,7 +397,7 @@ static void __init pca100_init(void) i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); - imx27_add_i2c_imx1(&pca100_i2c1_data); + imx27_add_imx_i2c(1, &pca100_i2c1_data); #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE) mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); @@ -436,6 +432,7 @@ static void __init pca100_init(void) mxc_register_device(&mxc_fb_device, &pca100_fb_data); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); } diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 9212e8f3700..b9888a8defc 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -43,7 +43,7 @@ #include "devices-imx27.h" #include "devices.h" -static int pcm038_pins[] = { +static const int pcm038_pins[] __initconst = { /* UART1 */ PE12_PF_UART1_TXD, PE13_PF_UART1_RXD, @@ -173,7 +173,6 @@ pcm038_nand_board_info __initconst = { static struct platform_device *platform_devices[] __initdata = { &pcm038_nor_mtd_device, &mxc_w1_master_device, - &mxc_fec_device, &pcm038_sram_mtd_device, &mxc_wdt, }; @@ -257,7 +256,7 @@ static struct regulator_init_data cam_data = { .consumer_supplies = cam_consumers, }; -struct mc13783_regulator_init_data pcm038_regulators[] = { +static struct mc13783_regulator_init_data pcm038_regulators[] = { { .id = MC13783_REGU_VCAM, .init_data = &cam_data, @@ -309,7 +308,7 @@ static void __init pcm038_init(void) i2c_register_board_info(1, pcm038_i2c_devices, ARRAY_SIZE(pcm038_i2c_devices)); - imx27_add_i2c_imx1(&pcm038_i2c1_data); + imx27_add_imx_i2c(1, &pcm038_i2c1_data); /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); @@ -325,6 +324,7 @@ static void __init pcm038_init(void) mxc_register_device(&mxc_usbh2, &usbh2_pdata); + imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index 88bf0d1e26e..fb2e5f3d37f 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -95,7 +95,7 @@ static struct platform_device dm9000x_device = { } }; -static int mxc_uart1_pins[] = { +static const int mxc_uart1_pins[] = { PC9_PF_UART1_CTS, PC10_PF_UART1_RTS, PC11_PF_UART1_TXD, diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c index f490a406d57..9110d9cca7a 100644 --- a/arch/arm/mach-imx/pcm970-baseboard.c +++ b/arch/arm/mach-imx/pcm970-baseboard.c @@ -31,7 +31,7 @@ #include "devices.h" -static int pcm970_pins[] = { +static const int pcm970_pins[] __initconst = { /* SDHC */ PB4_PF_SD2_D0, PB5_PF_SD2_D1, @@ -200,7 +200,7 @@ static struct resource pcm970_sja1000_resources[] = { }, }; -struct sja1000_platform_data pcm970_sja1000_platform_data = { +static struct sja1000_platform_data pcm970_sja1000_platform_data = { .osc_freq = 16000000, .ocr = OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL, .cdr = CDR_CBP, diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig index c71a7bc1928..aa57e35ce3c 100644 --- a/arch/arm/mach-mx25/Kconfig +++ b/arch/arm/mach-mx25/Kconfig @@ -12,6 +12,8 @@ config MACH_EUKREA_CPUIMX25 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI choice @@ -20,8 +22,8 @@ choice default MACH_EUKREA_MBIMXSD25_BASEBOARD config MACH_EUKREA_MBIMXSD25_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c index 40c7cc41cee..2179713873c 100644 --- a/arch/arm/mach-mx25/clock.c +++ b/arch/arm/mach-mx25/clock.c @@ -139,6 +139,16 @@ static unsigned long get_rate_lcdc(struct clk *clk) return get_rate_per(7); } +static unsigned long get_rate_esdhc1(struct clk *clk) +{ + return get_rate_per(3); +} + +static unsigned long get_rate_esdhc2(struct clk *clk) +{ + return get_rate_per(4); +} + static unsigned long get_rate_csi(struct clk *clk) { return get_rate_per(0); @@ -213,6 +223,12 @@ DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL); +DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL); +DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL, + &esdhc1_ahb_clk); +DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL); +DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL, + &esdhc2_ahb_clk); DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL); DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk); @@ -238,6 +254,10 @@ DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk); DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL); DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk); DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk); +DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL, + &esdhc1_per_clk); +DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL, + &esdhc2_per_clk); DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL); DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk); DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL); @@ -261,9 +281,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) @@ -279,6 +299,8 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-mx25/devices-imx25.h index d86a7c3ca8b..733aaee5bae 100644 --- a/arch/arm/mach-mx25/devices-imx25.h +++ b/arch/arm/mach-mx25/devices-imx25.h @@ -9,35 +9,47 @@ #include <mach/mx25.h> #include <mach/devices-common.h> +extern const struct imx_fec_data imx25_fec_data __initconst; +#define imx25_add_fec(pdata) \ + imx_add_fec(&imx25_fec_data, pdata) + #define imx25_add_flexcan0(pdata) \ imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata) #define imx25_add_flexcan1(pdata) \ imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata) -#define imx25_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX25_I2C1_BASE_ADDR, SZ_16K, MX25_INT_I2C1, pdata) -#define imx25_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX25_I2C2_BASE_ADDR, SZ_16K, MX25_INT_I2C2, pdata) -#define imx25_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX25_I2C3_BASE_ADDR, SZ_16K, MX25_INT_I2C3, pdata) - -#define imx25_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX25_UART1_BASE_ADDR, SZ_16K, MX25_INT_UART1, pdata) -#define imx25_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX25_UART2_BASE_ADDR, SZ_16K, MX25_INT_UART2, pdata) -#define imx25_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX25_UART3_BASE_ADDR, SZ_16K, MX25_INT_UART3, pdata) -#define imx25_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX25_UART4_BASE_ADDR, SZ_16K, MX25_INT_UART4, pdata) -#define imx25_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX25_UART5_BASE_ADDR, SZ_16K, MX25_INT_UART5, pdata) +extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst; +#define imx25_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata) +#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata) +#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata) +#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata) + +extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst; +#define imx25_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst; +#define imx25_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata) +#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata) +#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata) +#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata) +#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata) +#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata) +extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst; #define imx25_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v21(MX25_NFC_BASE_ADDR, MX25_INT_NANDFC, pdata) - -#define imx25_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX25_CSPI1_BASE_ADDR, SZ_16K, MX25_INT_CSPI1, pdata) -#define imx25_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX25_CSPI2_BASE_ADDR, SZ_16K, MX25_INT_CSPI2, pdata) -#define imx25_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX25_CSPI3_BASE_ADDR, SZ_16K, MX25_INT_CSPI3, pdata) + imx_add_mxc_nand(&imx25_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst; +#define imx25_add_spi_imx(id, pdata) \ + imx_add_spi_imx(&imx25_spi_imx_data[id], pdata) +#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata) +#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata) +#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata) + +#define imx25_add_esdhc0(pdata) \ + imx_add_esdhc(0, MX25_ESDHC1_BASE_ADDR, SZ_16K, MX25_INT_MMC_SDHC1, pdata) +#define imx25_add_esdhc1(pdata) \ + imx_add_esdhc(1, MX25_ESDHC2_BASE_ADDR, SZ_16K, MX25_INT_MMC_SDHC2, pdata) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 3468eb15b23..1d0eb3e8594 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -208,26 +208,6 @@ int __init imx25_register_gpios(void) return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports)); } -static struct resource mx25_fec_resources[] = { - { - .start = MX25_FEC_BASE_ADDR, - .end = MX25_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = MX25_INT_FEC, - .end = MX25_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mx25_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mx25_fec_resources), - .resource = mx25_fec_resources, -}; - static struct resource mx25_rtc_resources[] = { { .start = MX25_DRYICE_BASE_ADDR, @@ -305,44 +285,6 @@ struct platform_device mx25_kpp_device = { .resource = mx25_kpp_resources, }; -static struct resource imx_ssi_resources0[] = { - { - .start = MX25_SSI1_BASE_ADDR, - .end = MX25_SSI1_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM, - }, { - .start = MX25_INT_SSI1, - .end = MX25_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = MX25_SSI2_BASE_ADDR, - .end = MX25_SSI2_BASE_ADDR + 0x3fff, - .flags = IORESOURCE_MEM - }, { - .start = MX25_INT_SSI2, - .end = MX25_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; - -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; - static struct resource mx25_csi_resources[] = { { .start = MX25_CSI_BASE_ADDR, diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h index 4aceb68e35a..7b70a43c3a4 100644 --- a/arch/arm/mach-mx25/devices.h +++ b/arch/arm/mach-mx25/devices.h @@ -6,11 +6,8 @@ extern struct platform_device mxc_pwm_device1; extern struct platform_device mxc_pwm_device2; extern struct platform_device mxc_pwm_device3; extern struct platform_device mxc_keypad_device; -extern struct platform_device mx25_fec_device; extern struct platform_device mx25_rtc_device; extern struct platform_device mx25_fb_device; extern struct platform_device mxc_wdt; extern struct platform_device mx25_kpp_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; extern struct platform_device mx25_csi_device; diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c index 4aaadc753d3..c1fe048c445 100644 --- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c @@ -34,7 +34,6 @@ #include <mach/mx25.h> #include <mach/imx-uart.h> #include <mach/imxfb.h> -#include <mach/ssi.h> #include <mach/audmux.h> #include "devices-imx25.h" @@ -90,6 +89,9 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX25_PAD_KPP_COL2__AUD5_TXC, MX25_PAD_KPP_COL1__AUD5_RXD, MX25_PAD_KPP_COL0__AUD5_TXD, + /* CAN */ + MX25_PAD_GPIO_D__CAN2_RX, + MX25_PAD_GPIO_C__CAN2_TX, }; #define GPIO_LED1 83 @@ -205,7 +207,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { }, }; -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; @@ -239,7 +242,10 @@ void __init eukrea_mbimxsd25_baseboard_init(void) imx25_add_imx_uart1(&uart_pdata); mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); + + imx25_add_flexcan1(NULL); + imx25_add_esdhc0(NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c index e064bb3d691..21d9b9e9c92 100644 --- a/arch/arm/mach-mx25/mach-cpuimx25.c +++ b/arch/arm/mach-mx25/mach-cpuimx25.c @@ -23,7 +23,6 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/fec.h> #include <linux/platform_device.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> @@ -67,7 +66,7 @@ static struct pad_desc eukrea_cpuimx25_pads[] = { MX25_PAD_I2C1_DAT__I2C1_DAT, }; -static struct fec_platform_data mx25_fec_pdata = { +static const struct fec_platform_data mx25_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -129,7 +128,7 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); mxc_register_device(&mx25_rtc_device, NULL); - mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); + imx25_add_fec(&mx25_fec_pdata); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-mx25/mach-mx25_3ds.c index 62bc21f11a7..bd180569863 100644 --- a/arch/arm/mach-mx25/mach-mx25_3ds.c +++ b/arch/arm/mach-mx25/mach-mx25_3ds.c @@ -28,7 +28,6 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> -#include <linux/fec.h> #include <linux/platform_device.h> #include <linux/input/matrix_keypad.h> @@ -99,7 +98,7 @@ static struct pad_desc mx25pdk_pads[] = { MX25_PAD_KPP_COL3__KPP_COL3, }; -static struct fec_platform_data mx25_fec_pdata = { +static const struct fec_platform_data mx25_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; @@ -192,7 +191,7 @@ static void __init mx25pdk_init(void) mxc_register_device(&mxc_wdt, NULL); mx25pdk_fec_reset(); - mxc_register_device(&mx25_fec_device, &mx25_fec_pdata); + imx25_add_fec(&mx25_fec_pdata); mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data); } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 85beece802a..096fd33f8ab 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -9,6 +9,7 @@ config ARCH_MX35 bool select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 + select HAVE_EPIT comment "MX3 platforms:" @@ -16,6 +17,7 @@ config MACH_MX31ADS bool "Support MX31ADS platforms" select ARCH_MX31 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART default y help @@ -117,9 +119,11 @@ config MACH_PCM043 bool "Support Phytec pcm043 (i.MX35) platforms" select ARCH_MX35 select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI help Include support for Phytec pcm043 platform. This includes @@ -140,6 +144,7 @@ config MACH_MX35_3DS bool "Support MX35PDK platform" select ARCH_MX35 select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_NAND default n help Include support for MX35PDK platform. This includes specific @@ -159,6 +164,8 @@ config MACH_EUKREA_CPUIMX35 select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_FLEXCAN + select IMX_HAVE_PLATFORM_ESDHC select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX35 platform. This includes @@ -170,8 +177,8 @@ choice default MACH_EUKREA_MBIMXSD35_BASEBOARD config MACH_EUKREA_MBIMXSD35_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool + bool "Eukrea MBIMXSD development board" + select IMX_HAVE_PLATFORM_IMX_SSI help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile index 2bd7beceb99..8a182d0a3fc 100644 --- a/arch/arm/mach-mx3/Makefile +++ b/arch/arm/mach-mx3/Makefile @@ -7,7 +7,6 @@ obj-y := mm.o devices.o cpu.o CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS -CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o obj-$(CONFIG_ARCH_MX35) += clock-imx35.o obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 9a9eb6de612..109e98f323e 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -477,7 +477,7 @@ DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk); DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk); DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(ata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk); -DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, &sdma_clk1, &ahb_clk); +DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk); DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk); DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk); DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk); @@ -525,9 +525,9 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) - _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) + _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) @@ -564,7 +564,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "rng", rng_clk) - _REGISTER_CLOCK(NULL, "sdma_ahb", sdma_clk1) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1) _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index 7a62e744a8b..61e4a318980 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -364,8 +364,8 @@ DEFINE_CLOCK(cspi2_clk, 1, CCM_CGR0, 12, get_rate_ipg, NULL); DEFINE_CLOCK(ect_clk, 0, CCM_CGR0, 14, get_rate_ipg, NULL); DEFINE_CLOCK(edio_clk, 0, CCM_CGR0, 16, NULL, NULL); DEFINE_CLOCK(emi_clk, 0, CCM_CGR0, 18, get_rate_ipg, NULL); -DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg_per, NULL); -DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg_per, NULL); +DEFINE_CLOCK(epit1_clk, 0, CCM_CGR0, 20, get_rate_ipg, NULL); +DEFINE_CLOCK(epit2_clk, 1, CCM_CGR0, 22, get_rate_ipg, NULL); DEFINE_CLOCK(esai_clk, 0, CCM_CGR0, 24, NULL, NULL); DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGR0, 26, get_rate_sdhc, NULL); DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGR0, 28, get_rate_sdhc, NULL); @@ -451,17 +451,17 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) _REGISTER_CLOCK(NULL, "ect", ect_clk) _REGISTER_CLOCK(NULL, "edio", edio_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) - _REGISTER_CLOCK(NULL, "epit", epit1_clk) - _REGISTER_CLOCK(NULL, "epit", epit2_clk) + _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) + _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) _REGISTER_CLOCK(NULL, "esai", esai_clk) - _REGISTER_CLOCK(NULL, "sdhc", esdhc1_clk) - _REGISTER_CLOCK(NULL, "sdhc", esdhc2_clk) - _REGISTER_CLOCK(NULL, "sdhc", esdhc3_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) _REGISTER_CLOCK("fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) @@ -482,7 +482,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK(NULL, "sdma", sdma_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "spba", spba_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) @@ -535,8 +535,16 @@ int __init mx35_clocks_init() __raw_writel(cgr2, CCM_BASE + CCM_CGR2); __raw_writel(cgr3, CCM_BASE + CCM_CGR3); + clk_enable(&iim_clk); + mx35_read_cpu_rev(); + +#ifdef CONFIG_MXC_USE_EPIT + epit_timer_init(&epit1_clk, + MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); +#else mxc_timer_init(&gpt_clk, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); +#endif return 0; } diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c index 861afe0fe3a..d00a7545781 100644 --- a/arch/arm/mach-mx3/cpu.c +++ b/arch/arm/mach-mx3/cpu.c @@ -25,15 +25,15 @@ struct mx3_cpu_type { }; static struct mx3_cpu_type mx31_cpu_type[] __initdata = { - { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = CHIP_REV_1_0 }, - { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = CHIP_REV_1_1 }, - { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = CHIP_REV_1_1 }, - { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = CHIP_REV_1_1 }, - { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = CHIP_REV_1_1 }, - { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = CHIP_REV_1_2 }, - { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = CHIP_REV_1_2 }, - { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = CHIP_REV_2_0 }, - { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = CHIP_REV_2_0 }, + { .srev = 0x00, .name = "i.MX31(L)", .v = "1.0", .rev = MX3x_CHIP_REV_1_0 }, + { .srev = 0x10, .name = "i.MX31", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x11, .name = "i.MX31L", .v = "1.1", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x12, .name = "i.MX31", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x13, .name = "i.MX31L", .v = "1.15", .rev = MX3x_CHIP_REV_1_1 }, + { .srev = 0x14, .name = "i.MX31", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, + { .srev = 0x15, .name = "i.MX31L", .v = "1.2", .rev = MX3x_CHIP_REV_1_2 }, + { .srev = 0x28, .name = "i.MX31", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, + { .srev = 0x29, .name = "i.MX31L", .v = "2.0", .rev = MX3x_CHIP_REV_2_0 }, }; void __init mx31_read_cpu_rev(void) @@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void) u32 i, srev; /* read SREV register from IIM module */ - srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV)); + srev = __raw_readl(MX31_IO_ADDRESS(MX31_IIM_BASE_ADDR + MXC_IIMSREV)); for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++) if (srev == mx31_cpu_type[i].srev) { @@ -55,3 +55,30 @@ void __init mx31_read_cpu_rev(void) printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev); } + +unsigned int mx35_cpu_rev; +EXPORT_SYMBOL(mx35_cpu_rev); + +void __init mx35_read_cpu_rev(void) +{ + u32 rev; + char *srev = "unknown"; + + rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV)); + switch (rev) { + case 0x00: + mx35_cpu_rev = MX3x_CHIP_REV_1_0; + srev = "1.0"; + break; + case 0x10: + mx35_cpu_rev = MX3x_CHIP_REV_2_0; + srev = "2.0"; + break; + case 0x11: + mx35_cpu_rev = MX3x_CHIP_REV_2_1; + srev = "2.1"; + break; + } + + printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev); +} diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h index 3b1a44a2058..de9598590eb 100644 --- a/arch/arm/mach-mx3/devices-imx31.h +++ b/arch/arm/mach-mx3/devices-imx31.h @@ -9,30 +9,33 @@ #include <mach/mx31.h> #include <mach/devices-common.h> -#define imx31_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX31_I2C1_BASE_ADDR, SZ_4K, MX31_INT_I2C1, pdata) -#define imx31_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX31_I2C2_BASE_ADDR, SZ_4K, MX31_INT_I2C2, pdata) -#define imx31_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX31_I2C3_BASE_ADDR, SZ_4K, MX31_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst; +#define imx31_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata) +#define imx31_add_imx_i2c0(pdata) imx31_add_imx_i2c(0, pdata) +#define imx31_add_imx_i2c1(pdata) imx31_add_imx_i2c(1, pdata) +#define imx31_add_imx_i2c2(pdata) imx31_add_imx_i2c(2, pdata) -#define imx31_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX31_UART1_BASE_ADDR, SZ_16K, MX31_INT_UART1, pdata) -#define imx31_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX31_UART2_BASE_ADDR, SZ_16K, MX31_INT_UART2, pdata) -#define imx31_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX31_UART3_BASE_ADDR, SZ_16K, MX31_INT_UART3, pdata) -#define imx31_add_imx_uart3(pdata) \ - imx_add_imx_uart_1irq(3, MX31_UART4_BASE_ADDR, SZ_16K, MX31_INT_UART4, pdata) -#define imx31_add_imx_uart4(pdata) \ - imx_add_imx_uart_1irq(4, MX31_UART5_BASE_ADDR, SZ_16K, MX31_INT_UART5, pdata) +extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst; +#define imx31_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata) +extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst; +#define imx31_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx31_imx_uart_data[id], pdata) +#define imx31_add_imx_uart0(pdata) imx31_add_imx_uart(0, pdata) +#define imx31_add_imx_uart1(pdata) imx31_add_imx_uart(1, pdata) +#define imx31_add_imx_uart2(pdata) imx31_add_imx_uart(2, pdata) +#define imx31_add_imx_uart3(pdata) imx31_add_imx_uart(3, pdata) +#define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) + +extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst; #define imx31_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v1(MX31_NFC_BASE_ADDR, MX31_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) -#define imx31_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX31_CSPI1_BASE_ADDR, SZ_4K, MX31_INT_CSPI1, pdata) -#define imx31_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX31_CSPI2_BASE_ADDR, SZ_4K, MX31_INT_CSPI2, pdata) -#define imx31_add_spi_imx2(pdata) \ - imx_add_spi_imx(2, MX31_CSPI3_BASE_ADDR, SZ_4K, MX31_INT_CSPI3, pdata) +extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst; +#define imx31_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx31_cspi_data[id], pdata) +#define imx31_add_spi_imx0(pdata) imx31_add_cspi(0, pdata) +#define imx31_add_spi_imx1(pdata) imx31_add_cspi(1, pdata) +#define imx31_add_spi_imx2(pdata) imx31_add_cspi(2, pdata) diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h index f6a431a4c3d..509b346b7fe 100644 --- a/arch/arm/mach-mx3/devices-imx35.h +++ b/arch/arm/mach-mx3/devices-imx35.h @@ -9,29 +9,46 @@ #include <mach/mx35.h> #include <mach/devices-common.h> +extern const struct imx_fec_data imx35_fec_data __initconst; +#define imx35_add_fec(pdata) \ + imx_add_fec(&imx35_fec_data, pdata) + #define imx35_add_flexcan0(pdata) \ imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata) #define imx35_add_flexcan1(pdata) \ imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata) -#define imx35_add_imx_i2c0(pdata) \ - imx_add_imx_i2c(0, MX35_I2C1_BASE_ADDR, SZ_4K, MX35_INT_I2C1, pdata) -#define imx35_add_imx_i2c1(pdata) \ - imx_add_imx_i2c(1, MX35_I2C2_BASE_ADDR, SZ_4K, MX35_INT_I2C2, pdata) -#define imx35_add_imx_i2c2(pdata) \ - imx_add_imx_i2c(2, MX35_I2C3_BASE_ADDR, SZ_4K, MX35_INT_I2C3, pdata) +extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst; +#define imx35_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx35_imx_i2c_data[id], pdata) +#define imx35_add_imx_i2c0(pdata) imx35_add_imx_i2c(0, pdata) +#define imx35_add_imx_i2c1(pdata) imx35_add_imx_i2c(1, pdata) +#define imx35_add_imx_i2c2(pdata) imx35_add_imx_i2c(2, pdata) + +extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst; +#define imx35_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata) -#define imx35_add_imx_uart0(pdata) \ - imx_add_imx_uart_1irq(0, MX35_UART1_BASE_ADDR, SZ_16K, MX35_INT_UART1, pdata) -#define imx35_add_imx_uart1(pdata) \ - imx_add_imx_uart_1irq(1, MX35_UART2_BASE_ADDR, SZ_16K, MX35_INT_UART2, pdata) -#define imx35_add_imx_uart2(pdata) \ - imx_add_imx_uart_1irq(2, MX35_UART3_BASE_ADDR, SZ_16K, MX35_INT_UART3, pdata) +extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst; +#define imx35_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx35_imx_uart_data[id], pdata) +#define imx35_add_imx_uart0(pdata) imx35_add_imx_uart(0, pdata) +#define imx35_add_imx_uart1(pdata) imx35_add_imx_uart(1, pdata) +#define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) +extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst; #define imx35_add_mxc_nand(pdata) \ - imx_add_mxc_nand_v21(MX35_NFC_BASE_ADDR, MX35_INT_NANDFC, pdata) + imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst; +#define imx35_add_cspi(id, pdata) \ + imx_add_spi_imx(&imx35_cspi_data[id], pdata) +#define imx35_add_spi_imx0(pdata) imx35_add_cspi(0, pdata) +#define imx35_add_spi_imx1(pdata) imx35_add_cspi(1, pdata) -#define imx35_add_spi_imx0(pdata) \ - imx_add_spi_imx(0, MX35_CSPI1_BASE_ADDR, SZ_4K, MX35_INT_CSPI1, pdata) -#define imx35_add_spi_imx1(pdata) \ - imx_add_spi_imx(1, MX35_CSPI2_BASE_ADDR, SZ_4K, MX35_INT_CSPI2, pdata) +#define imx35_add_esdhc0(pdata) \ + imx_add_esdhc(0, MX35_ESDHC1_BASE_ADDR, SZ_16K, MX35_INT_MMC_SDHC1, pdata) +#define imx35_add_esdhc1(pdata) \ + imx_add_esdhc(1, MX35_ESDHC2_BASE_ADDR, SZ_16K, MX35_INT_MMC_SDHC2, pdata) +#define imx35_add_esdhc2(pdata) \ + imx_add_esdhc(2, MX35_ESDHC3_BASE_ADDR, SZ_16K, MX35_INT_MMC_SDHC3, pdata) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index a4fd1a26fc9..f4dff11aaee 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -281,65 +281,6 @@ struct platform_device mxc_usbh2 = { .num_resources = ARRAY_SIZE(mxc_usbh2_resources), }; -#if defined(CONFIG_ARCH_MX35) -static struct resource mxc_fec_resources[] = { - { - .start = MXC_FEC_BASE_ADDR, - .end = MXC_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MXC_INT_FEC, - .end = MXC_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; -#endif - -static struct resource imx_ssi_resources0[] = { - { - .start = SSI1_BASE_ADDR, - .end = SSI1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX31_INT_SSI1, - .end = MX31_INT_SSI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource imx_ssi_resources1[] = { - { - .start = SSI2_BASE_ADDR, - .end = SSI2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM - }, { - .start = MX31_INT_SSI2, - .end = MX31_INT_SSI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device imx_ssi_device0 = { - .name = "imx-ssi", - .id = 0, - .num_resources = ARRAY_SIZE(imx_ssi_resources0), - .resource = imx_ssi_resources0, -}; - -struct platform_device imx_ssi_device1 = { - .name = "imx-ssi", - .id = 1, - .num_resources = ARRAY_SIZE(imx_ssi_resources1), - .resource = imx_ssi_resources1, -}; - static struct resource imx_wdt_resources[] = { { .flags = IORESOURCE_MEM, @@ -410,10 +351,6 @@ static int __init mx3_devices_init(void) mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff; mxc_usbh1_resources[1].start = MXC_INT_USBHS; mxc_usbh1_resources[1].end = MXC_INT_USBHS; - imx_ssi_resources0[1].start = MX35_INT_SSI1; - imx_ssi_resources0[1].end = MX35_INT_SSI1; - imx_ssi_resources1[1].start = MX35_INT_SSI2; - imx_ssi_resources1[1].end = MX35_INT_SSI2; imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index e5535234839..585f814473d 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -2,7 +2,6 @@ extern struct platform_device mxc_w1_master_device; extern struct platform_device mx3_ipu; extern struct platform_device mx3_fb; extern struct platform_device mx3_camera; -extern struct platform_device mxc_fec_device; extern struct platform_device mxcsdhc_device0; extern struct platform_device mxcsdhc_device1; extern struct platform_device mxc_otg_udc_device; @@ -10,9 +9,6 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_ssi_device0; -extern struct platform_device imx_ssi_device1; -extern struct platform_device imx_ssi_device1; extern struct platform_device imx_wdt_device0; extern struct platform_device imx_rtc_device0; extern struct platform_device imx_kpp_device; diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c index f8f15e3ac7a..886959906fb 100644 --- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c @@ -43,7 +43,6 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include "devices-imx35.h" #include "devices.h" @@ -120,6 +119,16 @@ static struct pad_desc eukrea_mbimxsd_pads[] = { MX35_PAD_STXD4__AUDMUX_AUD4_TXD, MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, MX35_PAD_SCK4__AUDMUX_AUD4_TXC, + /* CAN2 */ + MX35_PAD_TX5_RX0__CAN2_TXCAN, + MX35_PAD_TX4_RX1__CAN2_RXCAN, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; #define GPIO_LED1 (2 * 32 + 29) @@ -206,7 +215,8 @@ static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { }, }; -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = { +static const +struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, }; @@ -242,7 +252,10 @@ void __init eukrea_mbimxsd35_baseboard_init(void) mxc_register_device(&mx3_ipu, &mx3_ipu_data); mxc_register_device(&mx3_fb, &mx3fb_pdata); - mxc_register_device(&imx_ssi_device0, &eukrea_mbimxsd_ssi_pdata); + imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); + + imx35_add_flexcan1(NULL); + imx35_add_esdhc0(NULL); gpio_request(GPIO_LED1, "LED1"); gpio_direction_output(GPIO_LED1, 1); diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c index 2a4f8b781ba..6024bb958ee 100644 --- a/arch/arm/mach-mx3/mach-cpuimx35.c +++ b/arch/arm/mach-mx3/mach-cpuimx35.c @@ -31,6 +31,7 @@ #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> #include <linux/fsl_devices.h> +#include <linux/i2c-gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -53,39 +54,16 @@ static const struct imxuart_platform_data uart_pdata __initconst = { }; static const struct imxi2c_platform_data -eukrea_cpuimx35_i2c0_data __initconst = { - .bitrate = 50000, + eukrea_cpuimx35_i2c0_data __initconst = { + .bitrate = 100000, }; -#define TSC2007_IRQGPIO (2 * 32 + 2) -static int ts_get_pendown_state(void) -{ - int val = 0; - gpio_free(TSC2007_IRQGPIO); - gpio_request(TSC2007_IRQGPIO, NULL); - gpio_direction_input(TSC2007_IRQGPIO); - - val = gpio_get_value(TSC2007_IRQGPIO); - - gpio_free(TSC2007_IRQGPIO); - gpio_request(TSC2007_IRQGPIO, NULL); - - return val ? 0 : 1; -} - -static int ts_init(void) -{ - gpio_request(TSC2007_IRQGPIO, NULL); - return 0; -} - static struct tsc2007_platform_data tsc2007_info = { .model = 2007, .x_plate_ohms = 180, - .get_pendown_state = ts_get_pendown_state, - .init_platform_hw = ts_init, }; +#define TSC2007_IRQGPIO (2 * 32 + 2) static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), @@ -98,7 +76,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }; static struct platform_device *devices[] __initdata = { - &mxc_fec_device, &imx_wdt_device0, }; @@ -135,18 +112,18 @@ static struct pad_desc eukrea_cpuimx35_pads[] = { }; static const struct mxc_nand_platform_data -eukrea_cpuimx35_nand_board_info __initconst = { + eukrea_cpuimx35_nand_board_info __initconst = { .width = 1, .hw_ecc = 1, .flash_bbt = 1, }; -static struct mxc_usbh_platform_data otg_pdata = { +static struct mxc_usbh_platform_data __maybe_unused otg_pdata = { .portsc = MXC_EHCI_MODE_UTMI, .flags = MXC_EHCI_INTERFACE_DIFF_UNI, }; -static struct mxc_usbh_platform_data usbh1_pdata = { +static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = { .portsc = MXC_EHCI_MODE_SERIAL, .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN, @@ -180,6 +157,7 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-mx3/mach-mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c index 94b3e7c4240..96cedc4a47f 100644 --- a/arch/arm/mach-mx3/mach-mx31ads.c +++ b/arch/arm/mach-mx3/mach-mx31ads.c @@ -517,7 +517,7 @@ static unsigned int ssi_pins[] = { static void mxc_init_audio(void) { - mxc_register_device(&imx_ssi_device0, NULL); + imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); } diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index 1c30d7212f1..91bb06552af 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -1,5 +1,6 @@ /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix * * Author: Fabio Estevam <fabio.estevam@freescale.com> * @@ -27,6 +28,8 @@ #include <linux/gpio.h> #include <linux/fsl_devices.h> +#include <linux/mtd/physmap.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -35,6 +38,7 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" @@ -43,8 +47,34 @@ static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct physmap_flash_data mx35pdk_flash_data = { + .width = 2, +}; + +static struct resource mx35pdk_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx35pdk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx35pdk_flash_data, + }, + .resource = &mx35pdk_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + static struct platform_device *devices[] __initdata = { - &mxc_fec_device, + &mx35pdk_flash, }; static struct pad_desc mx35pdk_pads[] = { @@ -75,14 +105,24 @@ static struct pad_desc mx35pdk_pads[] = { /* USBOTG */ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* USBH1 */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, }; /* OTG config */ -static struct fsl_usb2_platform_data usb_pdata = { +static struct fsl_usb2_platform_data usb_otg_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; +/* USB HOST config */ +static struct mxc_usbh_platform_data usb_host_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + /* * Board specific initialization. */ @@ -90,11 +130,16 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + + mxc_register_device(&mxc_usbh1, &usb_host_pdata); + + imx35_add_mxc_nand(&mx35pdk_nand_board_info); } static void __init mx35pdk_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c index 28886f0e62f..e790a00cf99 100644 --- a/arch/arm/mach-mx3/mach-pcm043.c +++ b/arch/arm/mach-mx3/mach-pcm043.c @@ -42,7 +42,6 @@ #include <mach/mxc_ehci.h> #include <mach/ulpi.h> #include <mach/audmux.h> -#include <mach/ssi.h> #include "devices-imx35.h" #include "devices.h" @@ -141,7 +140,6 @@ static struct i2c_board_info pcm043_i2c_devices[] = { static struct platform_device *devices[] __initdata = { &pcm043_flash, - &mxc_fec_device, &imx_wdt_device0, }; @@ -217,6 +215,13 @@ static struct pad_desc pcm043_pads[] = { /* CAN2 */ MX35_PAD_TX5_RX0__CAN2_TXCAN, MX35_PAD_TX4_RX1__CAN2_RXCAN, + /* esdhc */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; #define AC97_GPIO_TXFS (1 * 32 + 31) @@ -293,7 +298,7 @@ err1: mdelay(1); } -static struct imx_ssi_platform_data pcm043_ssi_pdata = { +static const struct imx_ssi_platform_data pcm043_ssi_pdata __initconst = { .ac97_reset = pcm043_ac97_cold_reset, .ac97_warm_reset = pcm043_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, @@ -357,11 +362,12 @@ static void __init mxc_board_init(void) MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ MXC_AUDMUX_V2_PDCR_RXDSEL(3)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&pcm037_nand_board_info); - mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata); + imx35_add_imx_ssi(0, &pcm043_ssi_pdata); imx35_add_imx_uart1(&uart_pdata); @@ -389,6 +395,7 @@ static void __init mxc_board_init(void) mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata); imx35_add_flexcan1(NULL); + imx35_add_esdhc0(NULL); } static void __init pcm043_timer_init(void) diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index 20e48c0195c..b4ffc531a82 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -110,6 +110,24 @@ void __init mx35_init_irq(void) static int mxc_init_l2x0(void) { void __iomem *l2x0_base; + void __iomem *clkctl_base; +/* + * First of all, we must repair broken chip settings. There are some + * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These + * misconfigured CPUs will run amok immediately when the L2 cache gets enabled. + * Workaraound is to setup the correct register setting prior enabling the + * L2 cache. This should not hurt already working CPUs, as they are using the + * same value + */ +#define L2_MEM_VAL 0x10 + + clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096); + if (clkctl_base != NULL) { + writel(0x00000515, clkctl_base + L2_MEM_VAL); + iounmap(clkctl_base); + } else { + pr_err("L2 cache: Cannot fix timing. Trying to continue without\n"); + } l2x0_base = ioremap(L2CC_BASE_ADDR, 4096); if (IS_ERR(l2x0_base)) { diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 0848db5dd36..fad31cc5004 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -5,11 +5,14 @@ config ARCH_MX51 default y select MXC_TZIC select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 comment "MX5 platforms:" config MACH_MX51_BABBAGE bool "Support MX51 BABBAGE platforms" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for MX51 Babbage platform, also known as MX51EVK in u-boot. This includes specific configurations for the board and its @@ -17,6 +20,8 @@ config MACH_MX51_BABBAGE config MACH_MX51_3DS bool "Support MX51PDK (3DS)" + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SPI_IMX select MXC_DEBUG_BOARD help Include support for MX51PDK (3DS) platform. This includes specific @@ -24,6 +29,8 @@ config MACH_MX51_3DS config MACH_EUKREA_CPUIMX51 bool "Support Eukrea CPUIMX51 module" + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART help Include support for Eukrea CPUIMX51 platform. This includes specific configurations for the module and its peripherals. @@ -42,4 +49,11 @@ config MACH_EUKREA_MBIMX51_BASEBOARD endchoice +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select IMX_HAVE_PLATFORM_IMX_UART + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 86c66e7f52f..d1aac9c3d33 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 623607a20f5..61f051043bb 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -28,9 +28,7 @@ #include <mach/eukrea-baseboards.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -39,6 +37,7 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" #define CPUIMX51_USBH1_STP (0*32 + 27) @@ -109,7 +108,6 @@ static struct platform_device serial_device = { #endif static struct platform_device *devices[] __initdata = { - &mxc_fec_device, #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) &serial_device, #endif @@ -148,11 +146,12 @@ static struct pad_desc eukrea_cpuimx51_pads[] = { MX51_PAD_USBH1_STP__USBH1_STP, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct imxi2c_platform_data eukrea_cpuimx51_i2c_data = { +static const +struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = { .bitrate = 100000, }; @@ -239,7 +238,7 @@ static void __init eukrea_cpuimx51_init(void) mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); - mxc_register_device(&mxc_uart_device0, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); gpio_direction_input(CPUIMX51_QUARTA_GPIO); gpio_free(CPUIMX51_QUARTA_GPIO); @@ -253,9 +252,10 @@ static void __init eukrea_cpuimx51_init(void) gpio_direction_input(CPUIMX51_QUARTD_GPIO); gpio_free(CPUIMX51_QUARTD_GPIO); + imx51_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); - mxc_register_device(&mxc_i2c_device1, &eukrea_cpuimx51_i2c_data); + imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index f95c2fd9466..ed08a2352a1 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -21,12 +22,13 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx51.h> -#include <mach/imx-uart.h> #include <mach/3ds_debugboard.h> +#include "devices-imx51.h" #include "devices.h" #define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) +#define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static struct pad_desc mx51_3ds_pads[] = { /* UART1 */ @@ -61,19 +63,25 @@ static struct pad_desc mx51_3ds_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, MX51_PAD_KEY_COL4__KEY_COL4, MX51_PAD_KEY_COL5__KEY_COL5, + + /* eCSPI2 */ + MX51_PAD_NANDF_RB2__ECSPI2_SCLK, + MX51_PAD_NANDF_RB3__ECSPI2_MISO, + MX51_PAD_NANDF_D15__ECSPI2_MOSI, + MX51_PAD_NANDF_D12__GPIO_3_28, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -127,6 +135,26 @@ static inline void mxc_init_keypad(void) } #endif +static int mx51_3ds_spi2_cs[] = { + MXC_SPI_CS(0), + MX51_3DS_ECSPI2_CS, +}; + +static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = { + .chipselect = mx51_3ds_spi2_cs, + .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs), +}; + +static struct spi_board_info mx51_3ds_spi_nor_device[] = { + { + .modalias = "m25p80", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .mode = SPI_MODE_0, + .platform_data = NULL,}, +}; + /* * Board specific initialization. */ @@ -136,6 +164,10 @@ static void __init mxc_board_init(void) ARRAY_SIZE(mx51_3ds_pads)); mxc_init_imx_uart(); + imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata); + spi_register_board_info(mx51_3ds_spi_nor_device, + ARRAY_SIZE(mx51_3ds_spi_nor_device)); + if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT)) printk(KERN_WARNING "Init of the debugboard failed, all " "devices on the board are unusable.\n"); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 6e384d92e62..23ee4a44740 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -17,12 +17,11 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/fsl_devices.h> +#include <linux/fec.h> #include <mach/common.h> #include <mach/hardware.h> -#include <mach/imx-uart.h> #include <mach/iomux-mx51.h> -#include <mach/i2c.h> #include <mach/mxc_ehci.h> #include <asm/irq.h> @@ -31,11 +30,13 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> +#include "devices-imx51.h" #include "devices.h" #define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */ #define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */ -#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */ +#define BABBAGE_PHY_RESET (1*32 + 5) /* GPIO_2_5 */ +#define BABBAGE_FEC_PHY_RESET (1*32 + 14) /* GPIO_2_14 */ /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -45,10 +46,6 @@ #define MX51_USB_PLL_DIV_19_2_MHZ 0x01 #define MX51_USB_PLL_DIV_24_MHZ 0x02 -static struct platform_device *devices[] __initdata = { - &mxc_fec_device, -}; - static struct pad_desc mx51babbage_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, @@ -93,19 +90,41 @@ static struct pad_desc mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO_1_7__GPIO_1_7, + + /* FEC */ + MX51_PAD_EIM_EB2__FEC_MDIO, + MX51_PAD_EIM_EB3__FEC_RDAT1, + MX51_PAD_EIM_CS2__FEC_RDAT2, + MX51_PAD_EIM_CS3__FEC_RDAT3, + MX51_PAD_EIM_CS4__FEC_RX_ER, + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_NANDF_RB2__FEC_COL, + MX51_PAD_NANDF_RB3__FEC_RXCLK, + MX51_PAD_NANDF_RB6__FEC_RDAT0, + MX51_PAD_NANDF_RB7__FEC_TDAT0, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_CS3__FEC_MDC, + MX51_PAD_NANDF_CS4__FEC_TDAT1, + MX51_PAD_NANDF_CS5__FEC_TDAT2, + MX51_PAD_NANDF_CS6__FEC_TDAT3, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + + /* FEC PHY reset line */ + MX51_PAD_EIM_A20__GPIO_2_14, }; /* Serial ports */ #if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; static inline void mxc_init_imx_uart(void) { - mxc_register_device(&mxc_uart_device0, &uart_pdata); - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); } #else /* !SERIAL_IMX */ static inline void mxc_init_imx_uart(void) @@ -113,7 +132,7 @@ static inline void mxc_init_imx_uart(void) } #endif /* SERIAL_IMX */ -static struct imxi2c_platform_data babbage_i2c_data = { +static const struct imxi2c_platform_data babbage_i2c_data __initconst = { .bitrate = 100000, }; @@ -171,6 +190,22 @@ static inline void babbage_usbhub_reset(void) gpio_set_value(BABBAGE_USB_HUB_RESET, 1); } +static inline void babbage_fec_reset(void) +{ + int ret; + + /* reset FEC PHY */ + ret = gpio_request(BABBAGE_FEC_PHY_RESET, "fec-phy-reset"); + if (ret) { + printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); + return; + } + gpio_direction_output(BABBAGE_FEC_PHY_RESET, 0); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 0); + msleep(1); + gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); +} + /* This function is board specific as the bit mask for the plldiv will also be different for other Freescale SoCs, thus a common bitmask is not possible and cannot get place in /plat-mxc/ehci.c.*/ @@ -178,7 +213,7 @@ static int initialize_otg_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -196,7 +231,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) { u32 v; void __iomem *usb_base; - u32 usbother_base; + void __iomem *usbother_base; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; @@ -250,10 +285,11 @@ static void __init mxc_board_init(void) mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, ARRAY_SIZE(mx51babbage_pads)); mxc_init_imx_uart(); - platform_add_devices(devices, ARRAY_SIZE(devices)); + babbage_fec_reset(); + imx51_add_fec(NULL); - mxc_register_device(&mxc_i2c_device0, &babbage_i2c_data); - mxc_register_device(&mxc_i2c_device1, &babbage_i2c_data); + imx51_add_imx_i2c(0, &babbage_i2c_data); + imx51_add_imx_i2c(1, &babbage_i2c_data); mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data); if (otg_mode_host) @@ -283,7 +319,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ .phys_io = MX51_AIPS1_BASE_ADDR, .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, - .boot_params = PHYS_OFFSET + 0x100, + .boot_params = MX51_PHYS_OFFSET + 0x100, .map_io = mx51_map_io, .init_irq = mx51_init_irq, .init_machine = mxc_board_init, diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c new file mode 100644 index 00000000000..b00502acdc1 --- /dev/null +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2010 Linaro Limited + * + * based on code from the following + * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. + * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/fsl_devices.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx51.h> +#include <mach/i2c.h> +#include <mach/mxc_ehci.h> + +#include <asm/irq.h> +#include <asm/setup.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "devices-imx51.h" +#include "devices.h" + +#define MX51_USB_PLL_DIV_24_MHZ 0x01 + +static struct pad_desc mx51efikamx_pads[] = { + /* UART1 */ + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + MX51_PAD_UART1_RTS__UART1_RTS, + MX51_PAD_UART1_CTS__UART1_CTS, +}; + +/* Serial ports */ +#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +static const struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static inline void mxc_init_imx_uart(void) +{ + imx51_add_imx_uart(0, &uart_pdata); + imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(2, &uart_pdata); +} +#else /* !SERIAL_IMX */ +static inline void mxc_init_imx_uart(void) +{ +} +#endif /* SERIAL_IMX */ + +/* This function is board specific as the bit mask for the plldiv will also + * be different for other Freescale SoCs, thus a common bitmask is not + * possible and cannot get place in /plat-mxc/ehci.c. + */ +static int initialize_otg_port(struct platform_device *pdev) +{ + u32 v; + void __iomem *usb_base; + void __iomem *usbother_base; + usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); + usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); + + /* Set the PHY clock to 19.2MHz */ + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; + v |= MX51_USB_PLL_DIV_24_MHZ; + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); + iounmap(usb_base); + return 0; +} + +static struct mxc_usbh_platform_data dr_utmi_config = { + .init = initialize_otg_port, + .portsc = MXC_EHCI_UTMI_16BIT, + .flags = MXC_EHCI_INTERNAL_PHY, +}; + +static void __init mxc_board_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, + ARRAY_SIZE(mx51efikamx_pads)); + mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config); + mxc_init_imx_uart(); +} + +static void __init mx51_efikamx_timer_init(void) +{ + mx51_clocks_init(32768, 24000000, 22579200, 24576000); +} + +static struct sys_timer mxc_timer = { + .init = mx51_efikamx_timer_init, +}; + +MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop") + /* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */ + .phys_io = MX51_AIPS1_BASE_ADDR, + .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, + .boot_params = MX51_PHYS_OFFSET + 0x100, + .map_io = mx51_map_io, + .init_irq = mx51_init_irq, + .init_machine = mxc_board_init, + .timer = &mxc_timer, +MACHINE_END diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index 57c10a9926c..21cecc04017 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -41,34 +41,36 @@ static struct clk usboh3_clk; #define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ -static int _clk_ccgr_enable(struct clk *clk) +static void _clk_ccgr_setclk(struct clk *clk, unsigned mode) { - u32 reg; + u32 reg = __raw_readl(clk->enable_reg); + + reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); + reg |= mode << clk->enable_shift; - reg = __raw_readl(clk->enable_reg); - reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift; __raw_writel(reg, clk->enable_reg); +} +static int _clk_ccgr_enable(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON); return 0; } static void _clk_ccgr_disable(struct clk *clk) { - u32 reg; - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF); +} +static int _clk_ccgr_enable_inrun(struct clk *clk) +{ + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); + return 0; } static void _clk_ccgr_disable_inwait(struct clk *clk) { - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift); - reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); + _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE); } /* @@ -571,6 +573,64 @@ static int _clk_uart_set_parent(struct clk *clk, struct clk *parent) return 0; } +#define clk_nfc_set_parent NULL + +static unsigned long clk_nfc_get_rate(struct clk *clk) +{ + unsigned long rate; + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >> + MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1; + rate = clk_get_rate(clk->parent) / div; + WARN_ON(rate == 0); + return rate; +} + +static unsigned long clk_nfc_round_rate(struct clk *clk, + unsigned long rate) +{ + u32 div; + unsigned long parent_rate = clk_get_rate(clk->parent); + + if (!rate) + return -EINVAL; + + div = parent_rate / rate; + + if (parent_rate % rate) + div++; + + if (div > 8) + return -EINVAL; + + return parent_rate / div; + +} + +static int clk_nfc_set_rate(struct clk *clk, unsigned long rate) +{ + u32 reg, div; + + div = clk_get_rate(clk->parent) / rate; + if (div == 0) + div++; + if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8)) + return -EINVAL; + + reg = __raw_readl(MXC_CCM_CBCDR); + reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK; + reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET; + __raw_writel(reg, MXC_CCM_CBCDR); + + while (__raw_readl(MXC_CCM_CDHIPR) & + MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){ + } + + return 0; +} + static unsigned long clk_usboh3_get_rate(struct clk *clk) { u32 reg, prediv, podf; @@ -620,6 +680,17 @@ static unsigned long get_ckih2_reference_clock_rate(struct clk *clk) return ckih2_reference; } +static unsigned long clk_emi_slow_get_rate(struct clk *clk) +{ + u32 reg, div; + + reg = __raw_readl(MXC_CCM_CBCDR); + div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >> + MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1; + + return clk_get_rate(clk->parent) / div; +} + /* External high frequency clock */ static struct clk ckih_clk = { .get_rate = get_high_reference_clock_rate, @@ -762,45 +833,105 @@ static struct clk kpp_clk = { .id = 0, }; -#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ +static struct clk emi_slow_clk = { + .parent = &pll2_sw_clk, + .enable_reg = MXC_CCM_CCGR5, + .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET, + .enable = _clk_ccgr_enable, + .disable = _clk_ccgr_disable_inwait, + .get_rate = clk_emi_slow_get_rate, +}; + +#define DEFINE_CLOCK1(name, i, er, es, pfx, p, s) \ static struct clk name = { \ .id = i, \ .enable_reg = er, \ .enable_shift = es, \ - .get_rate = gr, \ - .set_rate = sr, \ + .get_rate = pfx##_get_rate, \ + .set_rate = pfx##_set_rate, \ + .round_rate = pfx##_round_rate, \ + .set_parent = pfx##_set_parent, \ .enable = _clk_ccgr_enable, \ .disable = _clk_ccgr_disable, \ .parent = p, \ .secondary = s, \ } -/* DEFINE_CLOCK(name, id, enable_reg, enable_shift, - get_rate, set_rate, parent, secondary); */ +/* eCSPI */ +static unsigned long clk_ecspi_get_rate(struct clk *clk) +{ + u32 reg, pred, podf; + + reg = __raw_readl(MXC_CCM_CSCDR2); + + pred = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; + podf = (reg & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) >> + MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; + + return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), + (pred + 1) * (podf + 1)); +} + +static int clk_ecspi_set_parent(struct clk *clk, struct clk *parent) +{ + u32 reg, mux; + + mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk, + &lp_apm_clk); + + reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK; + reg |= mux << MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; + __raw_writel(reg, MXC_CCM_CSCMR1); + + return 0; +} + +static struct clk ecspi_main_clk = { + .parent = &pll3_sw_clk, + .get_rate = clk_ecspi_get_rate, + .set_parent = clk_ecspi_set_parent, +}; + +#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \ + static struct clk name = { \ + .id = i, \ + .enable_reg = er, \ + .enable_shift = es, \ + .get_rate = gr, \ + .set_rate = sr, \ + .enable = e, \ + .disable = d, \ + .parent = p, \ + .secondary = s, \ + } + +#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \ + DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s) /* Shared peripheral bus arbiter */ DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET, NULL, NULL, &ipg_clk, NULL); /* UART */ -DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, - NULL, NULL, &uart_root_clk, NULL); -DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, - NULL, NULL, &uart_root_clk, NULL); DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &uart_root_clk, &uart1_ipg_clk); +DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &uart_root_clk, &uart2_ipg_clk); +DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &uart_root_clk, &uart3_ipg_clk); /* GPT */ -DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &gpt_ipg_clk); /* I2C */ DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, @@ -814,6 +945,42 @@ DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, NULL, NULL, &ipg_clk, NULL); +/* NFC */ +DEFINE_CLOCK1(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET, + clk_nfc, &emi_slow_clk, NULL); + +/* SSI */ +DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk); +DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk); + +/* eCSPI */ +DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &spba_clk); +DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk); +DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable, + &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET, + NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk); + +/* CSPI */ +DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET, + NULL, NULL, &ipg_clk, &aips_tz2_clk); +DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET, + NULL, NULL, &ipg_clk, &cspi_ipg_clk); + +/* SDMA */ +DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET, + NULL, NULL, &ahb_clk, NULL); + #define _REGISTER_CLOCK(d, n, c) \ { \ .dev_id = d, \ @@ -837,6 +1004,16 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk) _REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk) + _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK(NULL, "ckih", ckih_clk) + _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) + _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h new file mode 100644 index 00000000000..c233379256b --- /dev/null +++ b/arch/arm/mach-mx5/devices-imx51.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/mx51.h> +#include <mach/devices-common.h> + +extern const struct imx_fec_data imx51_fec_data __initconst; +#define imx51_add_fec(pdata) \ + imx_add_fec(&imx51_fec_data, pdata) + +extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst; +#define imx51_add_imx_i2c(id, pdata) \ + imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata) + +extern const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst; +#define imx51_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata) + +extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst; +#define imx51_add_imx_uart(id, pdata) \ + imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata) + +extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst; +#define imx51_add_mxc_nand(pdata) \ + imx_add_mxc_nand(&imx51_mxc_nand_data, pdata) + +extern const struct imx_spi_imx_data imx51_cspi_data __initconst; +#define imx51_add_cspi(pdata) \ + imx_add_spi_imx(&imx51_cspi_data, pdata) + +extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst; +#define imx51_add_ecspi(id, pdata) \ + imx_add_spi_imx(&imx51_ecspi_data[id], pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 1920ff4963b..4c7be87a7c9 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -17,120 +17,6 @@ #include <mach/imx-uart.h> #include <mach/irqs.h> -static struct resource uart0[] = { - { - .start = MX51_UART1_BASE_ADDR, - .end = MX51_UART1_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART1, - .end = MX51_MXC_INT_UART1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MX51_UART2_BASE_ADDR, - .end = MX51_UART2_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART2, - .end = MX51_MXC_INT_UART2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MX51_UART3_BASE_ADDR, - .end = MX51_UART3_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_UART3, - .end = MX51_MXC_INT_UART3, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -static struct resource mxc_fec_resources[] = { - { - .start = MX51_MXC_FEC_BASE_ADDR, - .end = MX51_MXC_FEC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_FEC, - .end = MX51_MXC_INT_FEC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_fec_device = { - .name = "fec", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_fec_resources), - .resource = mxc_fec_resources, -}; - -static struct resource mxc_i2c0_resources[] = { - { - .start = MX51_I2C1_BASE_ADDR, - .end = MX51_I2C1_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C1, - .end = MX51_MXC_INT_I2C1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device0 = { - .name = "imx-i2c", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_i2c0_resources), - .resource = mxc_i2c0_resources, -}; - -static struct resource mxc_i2c1_resources[] = { - { - .start = MX51_I2C2_BASE_ADDR, - .end = MX51_I2C2_BASE_ADDR + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MX51_MXC_INT_I2C2, - .end = MX51_MXC_INT_I2C2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_i2c_device1 = { - .name = "imx-i2c", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_i2c1_resources), - .resource = mxc_i2c1_resources, -}; - static struct resource mxc_hsi2c_resources[] = { { .start = MX51_HSI2C_DMA_BASE_ADDR, diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h index e509cfaad1d..af1d07c0bbc 100644 --- a/arch/arm/mach-mx5/devices.h +++ b/arch/arm/mach-mx5/devices.h @@ -1,12 +1,6 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; -extern struct platform_device mxc_fec_device; extern struct platform_device mxc_usbdr_host_device; extern struct platform_device mxc_usbh1_device; extern struct platform_device mxc_usbdr_udc_device; extern struct platform_device mxc_wdt; -extern struct platform_device mxc_i2c_device0; -extern struct platform_device mxc_i2c_device1; extern struct platform_device mxc_hsi2c_device; extern struct platform_device mxc_keypad_device; diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index ffa93d1d6ef..d0e417ce2c0 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -30,6 +30,7 @@ #include <asm/mach/arch.h> +#include "devices-imx51.h" #include "devices.h" #define MBIMX51_TSC2007_GPIO (2*32 + 30) @@ -114,7 +115,7 @@ static struct pad_desc mbimx51_pads[] = { MX51_PAD_KEY_COL3__KEY_COL3, }; -static struct imxuart_platform_data uart_pdata = { +static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -172,8 +173,8 @@ void __init eukrea_mbimx51_baseboard_init(void) mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, ARRAY_SIZE(mbimx51_pads)); - mxc_register_device(&mxc_uart_device1, NULL); - mxc_register_device(&mxc_uart_device2, &uart_pdata); + imx51_add_imx_uart(1, NULL); + imx51_add_imx_uart(2, &uart_pdata); gpio_request(MBIMX51_LED0, "LED0"); gpio_direction_output(MBIMX51_LED0, 1); diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index 6785db4179b..95f8d614d4f 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -92,6 +92,18 @@ config MXC_DEBUG_BOARD data/address de-multiplexing and decode, signal level shift, interrupt control and various board functions. +config HAVE_EPIT + bool + +config MXC_USE_EPIT + bool "Use EPIT instead of GPT" + depends on HAVE_EPIT + help + Use EPIT as the system timer on systems that have it. Normally you + don't have a reason to do so as the EPIT has the same features and + uses the same clocks as the GPT. Anyway, on some systems the GPT + may be in use for other purposes. + config MXC_ULPI bool diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 78d405ed861..bb3443f9751 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o +obj-$(CONFIG_MXC_USE_EPIT) += epit.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index f9e7cdbd000..62920490c0d 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -186,7 +186,13 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); static int mxc_audmux_v2_init(void) { int ret; - +#if defined(CONFIG_ARCH_MX5) + if (cpu_is_mx51()) { + audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); + ret = 0; + return ret; + } +#endif #if defined(CONFIG_ARCH_MX3) if (cpu_is_mx31()) audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig index 9ab784b776f..404799487f1 100644 --- a/arch/arm/plat-mxc/devices/Kconfig +++ b/arch/arm/plat-mxc/devices/Kconfig @@ -1,3 +1,10 @@ +config IMX_HAVE_PLATFORM_ESDHC + bool + +config IMX_HAVE_PLATFORM_FEC + bool + default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51 + config IMX_HAVE_PLATFORM_FLEXCAN select HAVE_CAN_FLEXCAN bool @@ -5,6 +12,9 @@ config IMX_HAVE_PLATFORM_FLEXCAN config IMX_HAVE_PLATFORM_IMX_I2C bool +config IMX_HAVE_PLATFORM_IMX_SSI + bool + config IMX_HAVE_PLATFORM_IMX_UART bool diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index 347da5161f7..0a3c1f08941 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -1,8 +1,9 @@ -ifdef CONFIG_CAN_FLEXCAN -# the ifdef can be removed once the flexcan driver has been merged -obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o -endif +obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o +obj-y += platform-imx-dma.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o +obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) += platform-spi_imx.o diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c new file mode 100644 index 00000000000..68db2a22d2c --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-esdhc.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include <mach/devices-common.h> +#include <mach/esdhc.h> + +struct platform_device *__init imx_add_esdhc(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct esdhc_platform_data *pdata) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("sdhci-esdhc-imx", id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c new file mode 100644 index 00000000000..11d087f4e21 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <asm/sizes.h> +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_fec_data_entry_single(soc) \ + { \ + .iobase = soc ## _FEC_BASE_ADDR, \ + .irq = soc ## _INT_FEC, \ + } + +#ifdef CONFIG_ARCH_MX25 +const struct imx_fec_data imx25_fec_data __initconst = + imx_fec_data_entry_single(MX25); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_fec_data imx27_fec_data __initconst = + imx_fec_data_entry_single(MX27); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_fec_data imx35_fec_data __initconst = + imx_fec_data_entry_single(MX35); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_fec_data imx51_fec_data __initconst = + imx_fec_data_entry_single(MX51); +#endif + +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("fec", 0 /* -1? */, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c new file mode 100644 index 00000000000..02d98901805 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/hardware.h> +#include <mach/devices-common.h> +#ifdef SDMA_IS_MERGED +#include <mach/sdma.h> +#else +struct sdma_platform_data { + int sdma_version; + char *cpu_name; + int to_version; +}; +#endif + +struct imx_imx_sdma_data { + resource_size_t iobase; + resource_size_t irq; + struct sdma_platform_data pdata; +}; + +#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\ + { \ + .iobase = soc ## _SDMA ## _BASE_ADDR, \ + .irq = soc ## _INT_SDMA, \ + .pdata = { \ + .sdma_version = _sdma_version, \ + .cpu_name = _cpu_name, \ + .to_version = _to_version, \ + }, \ + } + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_ARCH_MX31 +struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = + imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0); +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = + imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0); +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = + imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0); +#endif /* ifdef CONFIG_ARCH_MX51 */ + +static struct platform_device __init __maybe_unused *imx_add_imx_sdma( + const struct imx_imx_sdma_data *data) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return imx_add_platform_device("imx-sdma", -1, + res, ARRAY_SIZE(res), + &data->pdata, sizeof(data->pdata)); +} + +static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +{ + return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); +} + +static int __init imxXX_add_imx_dma(void) +{ + struct platform_device *ret; + +#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27) + if (cpu_is_mx21() || cpu_is_mx27()) + ret = imx_add_imx_dma(); + else +#endif + +#if defined(CONFIG_ARCH_MX25) + if (cpu_is_mx25()) + ret = imx_add_imx_sdma(&imx25_imx_sdma_data); + else +#endif + +#if defined(CONFIG_ARCH_MX31) + if (cpu_is_mx31()) { + imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4; + ret = imx_add_imx_sdma(&imx31_imx_sdma_data); + } else +#endif + +#if defined(CONFIG_ARCH_MX35) + if (cpu_is_mx35()) { + imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4; + ret = imx_add_imx_sdma(&imx35_imx_sdma_data); + } else +#endif + +#if defined(CONFIG_ARCH_MX51) + if (cpu_is_mx51()) + ret = imx_add_imx_sdma(&imx51_imx_sdma_data); + else +#endif + ret = ERR_PTR(-ENODEV); + + if (IS_ERR(ret)) + return PTR_ERR(ret); + + return 0; +} +arch_initcall(imxXX_add_imx_dma); diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index d0af9f7d8ae..ca988d40a3d 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -6,24 +6,94 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_imx_i2c(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +#define imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) \ + { \ + .id = _id, \ + .iobase = soc ## _I2C ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_I2C ## _hwid, \ + } + +#define imx_imx_i2c_data_entry(soc, _id, _hwid, _size) \ + [_id] = imx_imx_i2c_data_entry_single(soc, _id, _hwid, _size) + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX1, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = + imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = { +#define imx25_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_i2c_data_entry(0, 1), + imx25_imx_i2c_data_entry(1, 2), + imx25_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = { +#define imx27_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_i2c_data_entry(0, 1), + imx27_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = { +#define imx31_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_i2c_data_entry(0, 1), + imx31_imx_i2c_data_entry(1, 2), + imx31_imx_i2c_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = { +#define imx35_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_i2c_data_entry(0, 1), + imx35_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = { +#define imx51_imx_i2c_data_entry(_id, _hwid) \ + imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_i2c_data_entry(0, 1), + imx51_imx_i2c_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-i2c", id, res, ARRAY_SIZE(res), + return imx_add_platform_device("imx-i2c", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c new file mode 100644 index 00000000000..38a7a0b8f2f --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2010 Pengutronix + * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/hardware.h> +#include <mach/devices-common.h> + +#define imx_imx_ssi_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _SSI ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_SSI ## _hwid, \ + .dmatx0 = soc ## _DMA_REQ_SSI ## _hwid ## _TX0, \ + .dmarx0 = soc ## _DMA_REQ_SSI ## _hwid ## _RX0, \ + .dmatx1 = soc ## _DMA_REQ_SSI ## _hwid ## _TX1, \ + .dmarx1 = soc ## _DMA_REQ_SSI ## _hwid ## _RX1, \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = { +#define imx21_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_ssi_data_entry(0, 1), + imx21_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = { +#define imx25_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K) + imx25_imx_ssi_data_entry(0, 1), + imx25_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = { +#define imx27_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_ssi_data_entry(0, 1), + imx27_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = { +#define imx31_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_ssi_data_entry(0, 1), + imx31_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { +#define imx35_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K) + imx35_imx_ssi_data_entry(0, 1), + imx35_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { +#define imx51_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_ssi_data_entry(0, 1), + imx51_imx_ssi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata) +{ + struct resource res[] = { + { + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, + .flags = IORESOURCE_IRQ, + }, +#define DMARES(_name) { \ + .name = #_name, \ + .start = data->dma ## _name, \ + .end = data->dma ## _name, \ + .flags = IORESOURCE_DMA, \ +} + DMARES(tx0), + DMARES(rx0), + DMARES(tx1), + DMARES(rx1), + }; + + return imx_add_platform_device("imx-ssi", data->id, + res, ARRAY_SIZE(res), + pdata, sizeof(*pdata)); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index fa3dff1433e..2039640adf2 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -6,55 +6,148 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_imx_uart_3irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irqrx, resource_size_t irqtx, - resource_size_t irqrts, +#define imx_imx_uart_3irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irqrx = soc ## _INT_UART ## _hwid ## RX, \ + .irqtx = soc ## _INT_UART ## _hwid ## TX, \ + .irqrts = soc ## _INT_UART ## _hwid ## RTS, \ + } + +#define imx_imx_uart_1irq_data_entry(soc, _id, _hwid, _size) \ + [_id] = { \ + .id = _id, \ + .iobase = soc ## _UART ## _hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_UART ## _hwid, \ + } + +#ifdef CONFIG_SOC_IMX1 +const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { +#define imx1_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) + imx1_imx_uart_data_entry(0, 1), + imx1_imx_uart_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_SOC_IMX1 */ + +#ifdef CONFIG_SOC_IMX21 +const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { +#define imx21_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX21, _id, _hwid, SZ_4K) + imx21_imx_uart_data_entry(0, 1), + imx21_imx_uart_data_entry(1, 2), + imx21_imx_uart_data_entry(2, 3), + imx21_imx_uart_data_entry(3, 4), +}; +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = { +#define imx25_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K) + imx25_imx_uart_data_entry(0, 1), + imx25_imx_uart_data_entry(1, 2), + imx25_imx_uart_data_entry(2, 3), + imx25_imx_uart_data_entry(3, 4), + imx25_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = { +#define imx27_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX27, _id, _hwid, SZ_4K) + imx27_imx_uart_data_entry(0, 1), + imx27_imx_uart_data_entry(1, 2), + imx27_imx_uart_data_entry(2, 3), + imx27_imx_uart_data_entry(3, 4), + imx27_imx_uart_data_entry(4, 5), + imx27_imx_uart_data_entry(5, 6), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = { +#define imx31_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K) + imx31_imx_uart_data_entry(0, 1), + imx31_imx_uart_data_entry(1, 2), + imx31_imx_uart_data_entry(2, 3), + imx31_imx_uart_data_entry(3, 4), + imx31_imx_uart_data_entry(4, 5), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { +#define imx35_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K) + imx35_imx_uart_data_entry(0, 1), + imx35_imx_uart_data_entry(1, 2), + imx35_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = { +#define imx51_imx_uart_data_entry(_id, _hwid) \ + imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K) + imx51_imx_uart_data_entry(0, 1), + imx51_imx_uart_data_entry(1, 2), + imx51_imx_uart_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, const struct imxuart_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irqrx, - .end = irqrx, + .start = data->irqrx, + .end = data->irqrx, .flags = IORESOURCE_IRQ, }, { - .start = irqtx, - .end = irqtx, + .start = data->irqtx, + .end = data->irqtx, .flags = IORESOURCE_IRQ, }, { - .start = irqrts, - .end = irqrx, + .start = data->irqrts, + .end = data->irqrx, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device("imx-uart", data->id, res, + ARRAY_SIZE(res), pdata, sizeof(*pdata)); } -struct platform_device *__init imx_add_imx_uart_1irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-uart", id, res, ARRAY_SIZE(res), + return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c index 1c286418d12..3fdcc32e3d6 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -7,38 +7,77 @@ * Free Software Foundation. */ #include <asm/sizes.h> +#include <mach/hardware.h> #include <mach/devices-common.h> -static struct platform_device *__init imx_add_mxc_nand(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata, - resource_size_t iosize) +#define imx_mxc_nand_data_entry_single(soc, _size) \ + { \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_NFC \ + } + +#define imx_mxc_nandv3_data_entry_single(soc, _size) \ + { \ + .id = -1, \ + .iobase = soc ## _NFC_BASE_ADDR, \ + .iosize = _size, \ + .axibase = soc ## _NFC_AXI_BASE_ADDR, \ + .irq = soc ## _INT_NFC \ + } + +#ifdef CONFIG_SOC_IMX21 +const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX21, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX21 */ + +#ifdef CONFIG_ARCH_MX25 +const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX25, SZ_8K); +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX27, SZ_4K); +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX31, SZ_4K); +#endif + +#ifdef CONFIG_ARCH_MX35 +const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst = + imx_mxc_nand_data_entry_single(MX35, SZ_8K); +#endif + +#ifdef CONFIG_ARCH_MX51 +const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst = + imx_mxc_nandv3_data_entry_single(MX51, SZ_16K); +#endif + +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata) { - static int id = 0; - + /* AXI has to come first, that's how the mxc_nand driver expect it */ struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->axibase, + .end = data->axibase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - - return imx_add_platform_device("mxc_nand", id++, res, ARRAY_SIZE(res), + return imx_add_platform_device("mxc_nand", data->id, + res + !data->axibase, + ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } - -struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata) -{ - return imx_add_mxc_nand(iobase, irq, pdata, SZ_4K); -} - -struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata) -{ - return imx_add_mxc_nand(iobase, irq, pdata, SZ_8K); -} diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index 2831a6d3eb4..e48340ec331 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -6,25 +6,96 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <asm/sizes.h> +#include <mach/hardware.h> #include <mach/devices-common.h> -struct platform_device *__init imx_add_spi_imx(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +#define imx_spi_imx_data_entry_single(soc, type, _devid, _id, hwid, _size) \ + { \ + .devid = _devid, \ + .id = _id, \ + .iobase = soc ## _ ## type ## hwid ## _BASE_ADDR, \ + .iosize = _size, \ + .irq = soc ## _INT_ ## type ## hwid, \ + } + +#define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ + [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) + +#ifdef CONFIG_SOC_IMX21 +const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { +#define imx21_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K) + imx21_cspi_data_entry(0, 1), + imx21_cspi_data_entry(1, 2), +#endif + +#ifdef CONFIG_ARCH_MX25 +const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { +#define imx25_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx25_cspi_data_entry(0, 1), + imx25_cspi_data_entry(1, 2), + imx25_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX25 */ + +#ifdef CONFIG_SOC_IMX27 +const struct imx_spi_imx_data imx27_cspi_data[] __initconst = { +#define imx27_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX27, CSPI, "imx27-cspi", _id, _hwid, SZ_4K) + imx27_cspi_data_entry(0, 1), + imx27_cspi_data_entry(1, 2), + imx27_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX27 */ + +#ifdef CONFIG_ARCH_MX31 +const struct imx_spi_imx_data imx31_cspi_data[] __initconst = { +#define imx31_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K) + imx31_cspi_data_entry(0, 1), + imx31_cspi_data_entry(1, 2), + imx31_cspi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_ARCH_MX31 */ + +#ifdef CONFIG_ARCH_MX35 +const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { +#define imx35_cspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K) + imx35_cspi_data_entry(0, 1), + imx35_cspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX35 */ + +#ifdef CONFIG_ARCH_MX51 +const struct imx_spi_imx_data imx51_cspi_data __initconst = + imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K); + +const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { +#define imx51_ecspi_data_entry(_id, _hwid) \ + imx_spi_imx_data_entry(MX51, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) + imx51_ecspi_data_entry(0, 1), + imx51_ecspi_data_entry(1, 2), +}; +#endif /* ifdef CONFIG_ARCH_MX51 */ + +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata) { struct resource res[] = { { - .start = iobase, - .end = iobase + iosize - 1, + .start = data->iobase, + .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, }, { - .start = irq, - .end = irq, + .start = data->irq, + .end = data->irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("spi_imx", id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + return imx_add_platform_device(data->devid, data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c index 35a064ff02b..9915607683d 100644 --- a/arch/arm/plat-mxc/ehci.c +++ b/arch/arm/plat-mxc/ehci.c @@ -249,8 +249,8 @@ int mxc_initialize_usb_hw(int port, unsigned int flags) #ifdef CONFIG_ARCH_MX51 if (cpu_is_mx51()) { void __iomem *usb_base; - u32 usbotg_base; - u32 usbother_base; + void __iomem *usbotg_base; + void __iomem *usbother_base; int ret = 0; usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K); diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c new file mode 100644 index 00000000000..ee9582f4972 --- /dev/null +++ b/arch/arm/plat-mxc/epit.c @@ -0,0 +1,242 @@ +/* + * linux/arch/arm/plat-mxc/epit.c + * + * Copyright (C) 2010 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#define EPITCR 0x00 +#define EPITSR 0x04 +#define EPITLR 0x08 +#define EPITCMPR 0x0c +#define EPITCNR 0x10 + +#define EPITCR_EN (1 << 0) +#define EPITCR_ENMOD (1 << 1) +#define EPITCR_OCIEN (1 << 2) +#define EPITCR_RLD (1 << 3) +#define EPITCR_PRESC(x) (((x) & 0xfff) << 4) +#define EPITCR_SWR (1 << 16) +#define EPITCR_IOVW (1 << 17) +#define EPITCR_DBGEN (1 << 18) +#define EPITCR_WAITEN (1 << 19) +#define EPITCR_RES (1 << 20) +#define EPITCR_STOPEN (1 << 21) +#define EPITCR_OM_DISCON (0 << 22) +#define EPITCR_OM_TOGGLE (1 << 22) +#define EPITCR_OM_CLEAR (2 << 22) +#define EPITCR_OM_SET (3 << 22) +#define EPITCR_CLKSRC_OFF (0 << 24) +#define EPITCR_CLKSRC_PERIPHERAL (1 << 24) +#define EPITCR_CLKSRC_REF_HIGH (1 << 24) +#define EPITCR_CLKSRC_REF_LOW (3 << 24) + +#define EPITSR_OCIF (1 << 0) + +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clk.h> + +#include <mach/hardware.h> +#include <asm/mach/time.h> +#include <mach/common.h> + +static struct clock_event_device clockevent_epit; +static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; + +static void __iomem *timer_base; + +static inline void epit_irq_disable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val &= ~EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static inline void epit_irq_enable(void) +{ + u32 val; + + val = __raw_readl(timer_base + EPITCR); + val |= EPITCR_OCIEN; + __raw_writel(val, timer_base + EPITCR); +} + +static void epit_irq_acknowledge(void) +{ + __raw_writel(EPITSR_OCIF, timer_base + EPITSR); +} + +static cycle_t epit_read(struct clocksource *cs) +{ + return 0 - __raw_readl(timer_base + EPITCNR); +} + +static struct clocksource clocksource_epit = { + .name = "epit", + .rating = 200, + .read = epit_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 20, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init epit_clocksource_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clocksource_epit.mult = clocksource_hz2mult(c, + clocksource_epit.shift); + clocksource_register(&clocksource_epit); + + return 0; +} + +/* clock event */ + +static int epit_set_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + unsigned long tcmp; + + tcmp = __raw_readl(timer_base + EPITCNR); + + __raw_writel(tcmp - evt, timer_base + EPITCMPR); + + return 0; +} + +static void epit_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long flags; + + /* + * The timer interrupt generation is disabled at least + * for enough time to call epit_set_next_event() + */ + local_irq_save(flags); + + /* Disable interrupt in GPT module */ + epit_irq_disable(); + + if (mode != clockevent_mode) { + /* Set event time into far-far future */ + + /* Clear pending interrupt */ + epit_irq_acknowledge(); + } + + /* Remember timer mode */ + clockevent_mode = mode; + local_irq_restore(flags); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + printk(KERN_ERR "epit_set_mode: Periodic mode is not " + "supported for i.MX EPIT\n"); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* + * Do not put overhead of interrupt enable/disable into + * epit_set_next_event(), the core has about 4 minutes + * to call epit_set_next_event() or shutdown clock after + * mode switching + */ + local_irq_save(flags); + epit_irq_enable(); + local_irq_restore(flags); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + /* Left event sources disabled, no more interrupts appear */ + break; + } +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t epit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_epit; + + epit_irq_acknowledge(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction epit_timer_irq = { + .name = "i.MX EPIT Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = epit_timer_interrupt, +}; + +static struct clock_event_device clockevent_epit = { + .name = "epit", + .features = CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_mode = epit_set_mode, + .set_next_event = epit_set_next_event, + .rating = 200, +}; + +static int __init epit_clockevent_init(struct clk *timer_clk) +{ + unsigned int c = clk_get_rate(timer_clk); + + clockevent_epit.mult = div_sc(c, NSEC_PER_SEC, + clockevent_epit.shift); + clockevent_epit.max_delta_ns = + clockevent_delta2ns(0xfffffffe, &clockevent_epit); + clockevent_epit.min_delta_ns = + clockevent_delta2ns(0x800, &clockevent_epit); + + clockevent_epit.cpumask = cpumask_of(0); + + clockevents_register_device(&clockevent_epit); + + return 0; +} + +void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +{ + clk_enable(timer_clk); + + timer_base = base; + + /* + * Initialise to a known state (all timers off, and timing reset) + */ + __raw_writel(0x0, timer_base + EPITCR); + + __raw_writel(0xffffffff, timer_base + EPITLR); + __raw_writel(EPITCR_EN | EPITCR_CLKSRC_REF_HIGH | EPITCR_WAITEN, + timer_base + EPITCR); + + /* init and register the timer to the framework */ + epit_clocksource_init(timer_clk); + epit_clockevent_init(timer_clk); + + /* Make irqs happen */ + setup_irq(irq, &epit_timer_irq); +} diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 57ec4a896a5..9d38da077ed 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -235,7 +235,7 @@ static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) unsigned long flags; spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (value << offset); + l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); __raw_writel(l, reg); spin_unlock_irqrestore(&port->lock, flags); } diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index 2941472582d..7a1e1f89ff0 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -32,6 +32,7 @@ extern void mx31_init_irq(void); extern void mx35_init_irq(void); extern void mx51_init_irq(void); extern void mxc91231_init_irq(void); +extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index c5f68c58730..04989788040 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -14,47 +14,101 @@ struct platform_device *imx_add_platform_device(const char *name, int id, const struct resource *res, unsigned int num_resources, const void *data, size_t size_data); -#if defined (CONFIG_CAN_FLEXCAN) || defined (CONFIG_CAN_FLEXCAN_MODULE) +#include <linux/fec.h> +struct imx_fec_data { + resource_size_t iobase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_fec( + const struct imx_fec_data *data, + const struct fec_platform_data *pdata); + #include <linux/can/platform/flexcan.h> struct platform_device *__init imx_add_flexcan(int id, resource_size_t iobase, resource_size_t iosize, resource_size_t irq, const struct flexcan_platform_data *pdata); -#else -/* the ifdef can be removed once the flexcan driver has been merged */ -struct flexcan_platform_data; -static inline struct platform_device *__init imx_add_flexcan(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, - const struct flexcan_platform_data *pdata) -{ - return NULL; -} -#endif #include <mach/i2c.h> -struct platform_device *__init imx_add_imx_i2c(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +struct imx_imx_i2c_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_i2c( + const struct imx_imx_i2c_data *data, const struct imxi2c_platform_data *pdata); +#include <mach/ssi.h> +struct imx_imx_ssi_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; + resource_size_t dmatx0; + resource_size_t dmarx0; + resource_size_t dmatx1; + resource_size_t dmarx1; +}; +struct platform_device *__init imx_add_imx_ssi( + const struct imx_imx_ssi_data *data, + const struct imx_ssi_platform_data *pdata); + #include <mach/imx-uart.h> -struct platform_device *__init imx_add_imx_uart_3irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irqrx, resource_size_t irqtx, - resource_size_t irqrts, +struct imx_imx_uart_3irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irqrx; + resource_size_t irqtx; + resource_size_t irqrts; +}; +struct platform_device *__init imx_add_imx_uart_3irq( + const struct imx_imx_uart_3irq_data *data, const struct imxuart_platform_data *pdata); -struct platform_device *__init imx_add_imx_uart_1irq(int id, - resource_size_t iobase, resource_size_t iosize, - resource_size_t irq, + +struct imx_imx_uart_1irq_data { + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t irq; +}; +struct platform_device *__init imx_add_imx_uart_1irq( + const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata); #include <mach/mxc_nand.h> -struct platform_device *__init imx_add_mxc_nand_v1(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata); -struct platform_device *__init imx_add_mxc_nand_v21(resource_size_t iobase, - int irq, const struct mxc_nand_platform_data *pdata); +struct imx_mxc_nand_data { + /* + * id is traditionally 0, but -1 is more appropriate. We use -1 for new + * machines but don't change existing devices as the nand device usually + * appears in the kernel command line to pass its partitioning. + */ + int id; + resource_size_t iobase; + resource_size_t iosize; + resource_size_t axibase; + resource_size_t irq; +}; +struct platform_device *__init imx_add_mxc_nand( + const struct imx_mxc_nand_data *data, + const struct mxc_nand_platform_data *pdata); #include <mach/spi.h> -struct platform_device *__init imx_add_spi_imx(int id, - resource_size_t iobase, resource_size_t iosize, int irq, +struct imx_spi_imx_data { + const char *devid; + int id; + resource_size_t iobase; + resource_size_t iosize; + int irq; +}; +struct platform_device *__init imx_add_spi_imx( + const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); + +#include <mach/esdhc.h> +struct platform_device *__init imx_add_esdhc(int id, + resource_size_t iobase, resource_size_t iosize, + resource_size_t irq, + const struct esdhc_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h new file mode 100644 index 00000000000..a48a9aaa56b --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -0,0 +1,16 @@ +/* + * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +struct esdhc_platform_data { + unsigned int wp_gpio; /* write protect pin */ +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h index 21bfa46785b..5160f1073ec 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h @@ -45,6 +45,15 @@ typedef enum iomux_config { PAD_CTL_PKE | PAD_CTL_HYS) #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \ PAD_CTL_SRE_FAST) +#define MX51_ECSPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST) + +#define MX51_PAD_CTRL_1 (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_2 (PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_3 (PAD_CTL_PKE | PAD_CTL_PUS_100K_UP) +#define MX51_PAD_CTRL_4 (PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> @@ -106,14 +115,20 @@ typedef enum iomux_config { #define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_EB2__GPIO_2_22 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB2__FEC_MDIO IOMUX_PAD(0x468, 0x0d4, 3, 0x0, 0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP) #define MX51_PAD_EIM_EB3__GPIO_2_23 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_EB3__FEC_RDAT1 IOMUX_PAD(0x46c, 0x0d8, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_OE__GPIO_2_24 IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS0__GPIO_2_25 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS1__GPIO_2_26 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CS2__GPIO_2_27 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS2__FEC_RDAT2 IOMUX_PAD(0x47c, 0x0e8, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS3__GPIO_2_28 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS3__FEC_RDAT3 IOMUX_PAD(0x480, 0x0ec, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS4__GPIO_2_29 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS4__FEC_RX_ER IOMUX_PAD(0x484, 0x0f0, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_CS5__GPIO_2_30 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_EIM_CS5__FEC_CRS IOMUX_PAD(0x488, 0x0f4, 3, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_EIM_DTACK__GPIO_2_31 IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_LBA__GPIO_3_1 IOMUX_PAD(0x494, 0x0FC, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_EIM_CRE__GPIO_3_2 IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL) @@ -126,18 +141,32 @@ typedef enum iomux_config { #define MX51_PAD_NANDF_RB0__GPIO_3_8 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB1__GPIO_3_9 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_RB2__GPIO_3_10 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK IOMUX_PAD(0x500, 0x124, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB2__FEC_COL IOMUX_PAD(0x500, 0x124, 1, 0x0, 0, MX51_PAD_CTRL_2) #define MX51_PAD_NANDF_RB3__GPIO_3_11 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__ECSPI2_MISO IOMUX_PAD(0x504, 0x128, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) +#define MX51_PAD_NANDF_RB3__FEC_RXCLK IOMUX_PAD(0x504, 0x128, 1, 0x0, 0, MX51_PAD_CTRL_2) +#define MX51_PAD_NANDF_RB6__FEC_RDAT0 IOMUX_PAD(0x5DC, 0x134, 1, 0x0, 0, MX51_PAD_CTRL_4) +#define MX51_PAD_NANDF_RB7__FEC_TDAT0 IOMUX_PAD(0x5E0, 0x138, 1, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_GPIO_NAND__GPIO_3_12 IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS0__GPIO_3_16 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS1__GPIO_3_17 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_CS2__GPIO_3_18 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS2__FEC_TX_ER IOMUX_PAD(0x520, 0x138, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS3__GPIO_3_19 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS3__FEC_MDC IOMUX_PAD(0x524, 0x13C, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS4__GPIO_3_20 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS4__FEC_TDAT1 IOMUX_PAD(0x528, 0x140, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS5__GPIO_3_21 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS5__FEC_TDAT2 IOMUX_PAD(0x52C, 0x144, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS6__GPIO_3_22 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS6__FEC_TDAT3 IOMUX_PAD(0x530, 0x148, 2, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_CS7__GPIO_3_23 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_CS7__FEC_TX_EN IOMUX_PAD(0x534, 0x14C, 1, 0x0, 0, MX51_PAD_CTRL_5) #define MX51_PAD_NANDF_RDY_INT__GPIO_3_24 IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK IOMUX_PAD(0x538, 0x150, 1, 0x0, 0, MX51_PAD_CTRL_4) #define MX51_PAD_NANDF_D15__GPIO_3_25 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_NANDF_D15__ECSPI2_MOSI IOMUX_PAD(0x53C, 0x154, 2, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_NANDF_D14__GPIO_3_26 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_D13__GPIO_3_27 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_NANDF_D12__GPIO_3_28 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL) @@ -185,15 +214,25 @@ typedef enum iomux_config { #define MX51_PAD_I2C1_CLK__HSI2C_CLK IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_I2C1_DAT__GPIO_4_17 IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_I2C1_DAT__HSI2C_DAT IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_TXD__GPIO_4_18 IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_RXD__GPIO_4_19 IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_CK__GPIO_4_20 IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_AUD3_BB_FS__GPIO_4_21 IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI IOMUX_PAD(0x600, 0x210, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_MOSI__GPIO_4_22 IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO IOMUX_PAD(0x604, 0x214, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_MISO__GPIO_4_23 IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0 IOMUX_PAD(0x608, 0x218, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SS0__GPIO_4_24 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SS1__GPIO_4_25 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY IOMUX_PAD(0x610, 0x220, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_RDY__GPIO_4_26 IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK IOMUX_PAD(0x614, 0x224, 0, 0x0, 0, MX51_ECSPI_PAD_CTRL) #define MX51_PAD_CSPI1_SCLK__GPIO_4_27 IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) #define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, 0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST) @@ -236,14 +275,14 @@ typedef enum iomux_config { #define MX51_PAD_USBH1_DATA6__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_USBH1_DATA7__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0, 0, MX51_USBH1_PAD_CTRL) #define MX51_PAD_DI1_PIN11__GPIO_3_0 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL) -#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN12__GPIO_3_1 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_PIN13__GPIO_3_2 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D0_CS__GPIO_3_3 IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL) +#define MX51_PAD_DI1_D1_CS__GPIO_3_4 IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5 IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6 IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7 IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL) +#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8 IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL) @@ -295,11 +334,17 @@ typedef enum iomux_config { #define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CMD__AUD5_RXFS IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL) #define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_CLK__AUD5_RXC IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL) #define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA0__AUD5_TXD IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL) #define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA1__AUD5_RXD IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL) #define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA2__AUD5_TXC IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL) #define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL) +#define MX51_PAD_SD1_DATA3__AUD5_TXFS IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL) #define MX51_PAD_GPIO_1_0__GPIO_1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_GPIO_1_1__GPIO_1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL) #define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h index ed98b9c9f38..8bc59720b6e 100644 --- a/arch/arm/plat-mxc/include/mach/mx21.h +++ b/arch/arm/plat-mxc/include/mach/mx21.h @@ -120,7 +120,7 @@ #define MX21_INT_GPT1 26 #define MX21_INT_WDOG 27 #define MX21_INT_PCMCIA 28 -#define MX21_INT_NANDFC 29 +#define MX21_INT_NFC 29 #define MX21_INT_BMI 30 #define MX21_INT_CSI 31 #define MX21_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 4a6f800990f..153dd1b2a47 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -50,6 +50,8 @@ #define MX25_SSI1_BASE_ADDR 0x50034000 #define MX25_NFC_BASE_ADDR 0xbb000000 #define MX25_DRYICE_BASE_ADDR 0x53ffc000 +#define MX25_ESDHC1_BASE_ADDR 0x53fb4000 +#define MX25_ESDHC2_BASE_ADDR 0x53fb8000 #define MX25_LCDC_BASE_ADDR 0x53fbc000 #define MX25_KPP_BASE_ADDR 0x43fa8000 #define MX25_OTG_BASE_ADDR 0x53ff4000 @@ -59,6 +61,8 @@ #define MX25_INT_I2C1 3 #define MX25_INT_I2C2 4 #define MX25_INT_UART4 5 +#define MX25_INT_MMC_SDHC2 8 +#define MX25_INT_MMC_SDHC1 9 #define MX25_INT_I2C3 10 #define MX25_INT_SSI2 11 #define MX25_INT_SSI1 12 @@ -69,7 +73,7 @@ #define MX25_INT_KPP 24 #define MX25_INT_DRYICE 25 #define MX25_INT_UART2 32 -#define MX25_INT_NANDFC 33 +#define MX25_INT_NFC 33 #define MX25_INT_LCDC 39 #define MX25_INT_UART5 40 #define MX25_INT_CAN1 43 @@ -77,4 +81,13 @@ #define MX25_INT_UART1 45 #define MX25_INT_FEC 57 +#define MX25_DMA_REQ_SSI2_RX1 22 +#define MX25_DMA_REQ_SSI2_TX1 23 +#define MX25_DMA_REQ_SSI2_RX0 24 +#define MX25_DMA_REQ_SSI2_TX0 25 +#define MX25_DMA_REQ_SSI1_RX1 26 +#define MX25_DMA_REQ_SSI1_TX1 27 +#define MX25_DMA_REQ_SSI1_RX0 28 +#define MX25_DMA_REQ_SSI1_TX0 29 + #endif /* ifndef __MACH_MX25_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index a8ab2e02a8c..2237ba2e535 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -167,7 +167,7 @@ static inline void mx27_setup_weimcs(size_t cs, #define MX27_INT_GPT1 26 #define MX27_INT_WDOG 27 #define MX27_INT_PCMCIA 28 -#define MX27_INT_NANDFC 29 +#define MX27_INT_NFC 29 #define MX27_INT_ATA 30 #define MX27_INT_CSI 31 #define MX27_INT_DMACH0 32 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index afee3ab9d62..03e2afabc9f 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -168,7 +168,7 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_POWER_FAIL 30 #define MX31_INT_CCM_DVFS 31 #define MX31_INT_UART2 32 -#define MX31_INT_NANDFC 33 +#define MX31_INT_NFC 33 #define MX31_INT_SDMA 34 #define MX31_INT_USB1 35 #define MX31_INT_USB2 36 @@ -197,6 +197,15 @@ static inline void mx31_setup_weimcs(size_t cs, #define MX31_INT_EXT_WDOG 62 #define MX31_INT_EXT_TV 63 +#define MX31_DMA_REQ_SSI2_RX1 22 +#define MX31_DMA_REQ_SSI2_TX1 23 +#define MX31_DMA_REQ_SSI2_RX0 24 +#define MX31_DMA_REQ_SSI2_TX0 25 +#define MX31_DMA_REQ_SSI1_RX1 26 +#define MX31_DMA_REQ_SSI1_TX1 27 +#define MX31_DMA_REQ_SSI1_RX0 28 +#define MX31_DMA_REQ_SSI1_TX0 29 + #define MX31_PROD_SIGNATURE 0x1 /* For MX31 */ /* silicon revisions specific to i.MX31 */ diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h index af3038c12e3..cb071b7b17e 100644 --- a/arch/arm/plat-mxc/include/mach/mx35.h +++ b/arch/arm/plat-mxc/include/mach/mx35.h @@ -1,5 +1,6 @@ #ifndef __MACH_MX35_H__ #define __MACH_MX35_H__ + /* * IRAM */ @@ -52,6 +53,9 @@ #define MX35_GPIO3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xa4000) #define MX35_SCC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xac000) #define MX35_RNGA_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb0000) +#define MX35_ESDHC1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb4000) +#define MX35_ESDHC2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xb8000) +#define MX35_ESDHC3_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xbc000) #define MX35_IPU_CTRL_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc0000) #define MX35_AUDMUX_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xc4000) #define MX35_GPIO1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xcc000) @@ -63,6 +67,8 @@ #define MX35_CAN1_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe4000) #define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000) #define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000) +#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000) + #define MX35_OTG_BASE_ADDR 0x53ff4000 #define MX35_ROMP_BASE_ADDR 0x60000000 @@ -145,7 +151,7 @@ #define MX35_INT_GPT 29 #define MX35_INT_POWER_FAIL 30 #define MX35_INT_UART2 32 -#define MX35_INT_NANDFC 33 +#define MX35_INT_NFC 33 #define MX35_INT_SDMA 34 #define MX35_INT_USBHS 35 #define MX35_INT_USBOTG 37 @@ -173,22 +179,18 @@ #define MX35_INT_EXT_WDOG 62 #define MX35_INT_EXT_TV 63 +#define MX35_DMA_REQ_SSI2_RX1 22 +#define MX35_DMA_REQ_SSI2_TX1 23 +#define MX35_DMA_REQ_SSI2_RX0 24 +#define MX35_DMA_REQ_SSI2_TX0 25 +#define MX35_DMA_REQ_SSI1_RX1 26 +#define MX35_DMA_REQ_SSI1_TX1 27 +#define MX35_DMA_REQ_SSI1_RX0 28 +#define MX35_DMA_REQ_SSI1_TX0 29 + #define MX35_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ -#define MX35_CHIP_REV_1_0 0x10 -#define MX35_CHIP_REV_1_1 0x11 -#define MX35_CHIP_REV_1_2 0x12 -#define MX35_CHIP_REV_1_3 0x13 -#define MX35_CHIP_REV_2_0 0x20 -#define MX35_CHIP_REV_2_1 0x21 -#define MX35_CHIP_REV_2_2 0x22 -#define MX35_CHIP_REV_2_3 0x23 -#define MX35_CHIP_REV_3_0 0x30 -#define MX35_CHIP_REV_3_1 0x31 -#define MX35_CHIP_REV_3_2 0x32 - -#define MX35_SYSTEM_REV_MIN MX35_CHIP_REV_1_0 +#define MX35_SYSTEM_REV_MIN MX3x_CHIP_REV_1_0 #define MX35_SYSTEM_REV_NUM 3 #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h index 7a356de385f..d1bd26d7b8a 100644 --- a/arch/arm/plat-mxc/include/mach/mx3x.h +++ b/arch/arm/plat-mxc/include/mach/mx3x.h @@ -240,7 +240,7 @@ #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ -/* silicon revisions specific to i.MX31 */ +/* silicon revisions specific to i.MX31 and i.MX35 */ #define MX3x_CHIP_REV_1_0 0x10 #define MX3x_CHIP_REV_1_1 0x11 #define MX3x_CHIP_REV_1_2 0x12 @@ -267,6 +267,14 @@ static inline int mx31_revision(void) { return mx31_cpu_rev; } + +extern unsigned int mx35_cpu_rev; +extern void mx35_read_cpu_rev(void); + +static inline int mx35_revision(void) +{ + return mx35_cpu_rev; +} #endif #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS @@ -389,19 +397,6 @@ static inline int mx31_revision(void) #define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG #define MXC_INT_EXT_TV MX3x_INT_EXT_TV #define PROD_SIGNATURE MX3x_PROD_SIGNATURE -#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0 -#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1 -#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2 -#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3 -#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0 -#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1 -#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2 -#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3 -#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0 -#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1 -#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2 -#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN -#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM #endif #endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 5aad344d565..c54b5c32d82 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -1,5 +1,5 @@ -#ifndef __ASM_ARCH_MXC_MX51_H__ -#define __ASM_ARCH_MXC_MX51_H__ +#ifndef __MACH_MX51_H__ +#define __MACH_MX51_H__ /* * MX51 memory map: @@ -7,24 +7,23 @@ * * Virt Phys Size What * --------------------------------------------------------------------------- - * FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM) + * fa3e0000 1ffe0000 128K IRAM (SCCv2 RAM) * 30000000 256M GPU * 40000000 512M IPU - * FA200000 60000000 1M DEBUG - * FB100000 70000000 1M SPBA 0 - * FB000000 73F00000 1M AIPS 1 - * FB200000 83F00000 1M AIPS 2 - * 8FFFC000 16K TZIC (interrupt controller) + * fa200000 60000000 1M DEBUG + * fb100000 70000000 1M SPBA 0 + * fb000000 73f00000 1M AIPS 1 + * fb200000 83f00000 1M AIPS 2 + * 8fffc000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR - * A0000000 256M CSD1 SDRAM/DDR - * B0000000 128M CS0 Flash - * B8000000 128M CS1 Flash - * C0000000 128M CS2 Flash - * C8000000 64M CS3 Flash - * CC000000 32M CS4 SRAM - * CE000000 32M CS5 SRAM - * CFFF0000 64K NFC (NAND Flash AXI) - * + * a0000000 256M CSD1 SDRAM/DDR + * b0000000 128M CS0 Flash + * b8000000 128M CS1 Flash + * c0000000 128M CS2 Flash + * c8000000 64M CS3 Flash + * cc000000 32M CS4 SRAM + * ce000000 32M CS5 SRAM + * cfff0000 64K NFC (NAND Flash AXI) */ /* @@ -36,65 +35,151 @@ /* * IRAM */ -#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ -#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000 +#define MX51_IRAM_BASE_ADDR 0x1ffe0000 /* internal ram */ +#define MX51_IRAM_BASE_ADDR_VIRT 0xfa3e0000 #define MX51_IRAM_PARTITIONS 16 -#define MX51_IRAM_PARTITIONS_TO1 12 #define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */ +#define MX51_GPU_BASE_ADDR 0x20000000 +#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 +#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 + +#define MX51_DEBUG_BASE_ADDR 0x60000000 +#define MX51_DEBUG_BASE_ADDR_VIRT 0xfa200000 +#define MX51_DEBUG_SIZE SZ_1M + +#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x01000) +#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x02000) +#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x03000) +#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x04000) +#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x05000) +#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x06000) +#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x07000) +#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x08000) + /* - * NFC + * SPBA global module enabled #0 */ -#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_SIZE SZ_64K +#define MX51_SPBA0_BASE_ADDR 0x70000000 +#define MX51_SPBA0_BASE_ADDR_VIRT 0xfb100000 +#define MX51_SPBA0_SIZE SZ_1M + +#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x04000) +#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x08000) +#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0c000) +#define MX51_ECSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x10000) +#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x14000) +#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x20000) +#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x24000) +#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x28000) +#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x30000) +#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x34000) +#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x38000) +#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x3c000) /* - * Graphics Memory of GPU + * AIPS 1 */ -#define MX51_GPU_BASE_ADDR 0x20000000 -#define MX51_GPU2D_BASE_ADDR 0xD0000000 +#define MX51_AIPS1_BASE_ADDR 0x73f00000 +#define MX51_AIPS1_BASE_ADDR_VIRT 0xfb000000 +#define MX51_AIPS1_SIZE SZ_1M + +#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x80000) +#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x84000) +#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x88000) +#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x8c000) +#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x90000) +#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x94000) +#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x98000) +#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x9c000) +#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa0000) +#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa4000) +#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xa8000) +#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xac000) +#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb0000) +#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb4000) +#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xb8000) +#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xbc000) +#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xc0000) +#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd0000) +#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd4000) +#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0xd8000) -#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR 0xE0000000 +/* + * AIPS 2 + */ +#define MX51_AIPS2_BASE_ADDR 0x83f00000 +#define MX51_AIPS2_BASE_ADDR_VIRT 0xfb200000 +#define MX51_AIPS2_SIZE SZ_1M -#define MX51_DEBUG_BASE_ADDR 0x60000000 -#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 -#define MX51_DEBUG_SIZE SZ_1M -#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000) -#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000) -#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000) -#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000) -#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000) -#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000) -#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000) -#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000) +#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x80000) +#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x84000) +#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x88000) +#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x94000) +#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x98000) +#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x9c000) +#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa0000) +#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa4000) +#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xa8000) +#define MX51_ECSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xac000) +#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb0000) +#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb4000) +#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xb8000) +#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xbc000) +#define MX51_CSPI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc0000) +#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc4000) +#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xc8000) +#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xcc000) +#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd0000) +#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd8000) +#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xd9000) +#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xda000) +#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdb000) +#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdbf00) +#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xdc000) +#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe0000) +#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe4000) +#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xe8000) +#define MX51_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xec000) +#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf0000) +#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf4000) +#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0xf8000) + +#define MX51_CSD0_BASE_ADDR 0x90000000 +#define MX51_CSD1_BASE_ADDR 0xa0000000 +#define MX51_CS0_BASE_ADDR 0xb0000000 +#define MX51_CS1_BASE_ADDR 0xb8000000 +#define MX51_CS2_BASE_ADDR 0xc0000000 +#define MX51_CS3_BASE_ADDR 0xc8000000 +#define MX51_CS4_BASE_ADDR 0xcc000000 +#define MX51_CS5_BASE_ADDR 0xce000000 /* - * SPBA global module enabled #0 + * NFC */ -#define MX51_SPBA0_BASE_ADDR 0x70000000 -#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000 -#define MX51_SPBA0_SIZE SZ_1M +#define MX51_NFC_AXI_BASE_ADDR 0xcfff0000 /* NAND flash AXI */ +#define MX51_NFC_AXI_SIZE SZ_64K + +#define MX51_GPU2D_BASE_ADDR 0xd0000000 +#define MX51_TZIC_BASE_ADDR 0xe0000000 -#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000) -#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000) -#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000) -#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000) -#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000) -#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000) -#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000) -#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000) -#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000) -#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000) -#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000) -#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000) +#define MX51_IO_ADDRESS(x) ( \ + IMX_IO_ADDRESS(x, MX51_IRAM) ?: \ + IMX_IO_ADDRESS(x, MX51_DEBUG) ?: \ + IMX_IO_ADDRESS(x, MX51_SPBA0) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS1) ?: \ + IMX_IO_ADDRESS(x, MX51_AIPS2)) + +/* This is currently used in <mach/debug-macro.S>, but should go away */ +#define MX51_AIPS1_IO_ADDRESS(x) \ + (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) /* * defines for SPBA modules */ #define MX51_SPBA_SDHC1 0x04 #define MX51_SPBA_SDHC2 0x08 -#define MX51_SPBA_UART3 0x0C +#define MX51_SPBA_UART3 0x0c #define MX51_SPBA_CSPI1 0x10 #define MX51_SPBA_SSI2 0x14 #define MX51_SPBA_SDHC3 0x20 @@ -103,35 +188,7 @@ #define MX51_SPBA_ATA 0x30 #define MX51_SPBA_SLIM 0x34 #define MX51_SPBA_HSI2C 0x38 -#define MX51_SPBA_CTRL 0x3C - -/* - * AIPS 1 - */ -#define MX51_AIPS1_BASE_ADDR 0x73F00000 -#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000 -#define MX51_AIPS1_SIZE SZ_1M - -#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000) -#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000) -#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000) -#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000) -#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000) -#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000) -#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000) -#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000) -#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000) -#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000) -#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000) -#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000) -#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000) -#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000) -#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000) -#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000) -#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000) -#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000) -#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000) -#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000) +#define MX51_SPBA_CTRL 0x3c /* * Defines for modules using static and dynamic DMA channels @@ -164,282 +221,186 @@ #define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL #define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL -/* - * AIPS 2 - */ -#define MX51_AIPS2_BASE_ADDR 0x83F00000 -#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000 -#define MX51_AIPS2_SIZE SZ_1M - -#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000) -#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000) -#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000) -#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000) -#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000) -#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000) -#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000) -#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000) -#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000) -#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000) -#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000) -#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000) -#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000) -#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000) -#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000) -#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000) -#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000) -#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000) -#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000) -#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000) -#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000) -#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000) -#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000) -#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00) -#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000) -#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000) -#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000) -#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000) -#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000) -#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000) -#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000) -#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000) - -/* - * Memory regions and CS - */ -#define MX51_GPU_CTRL_BASE_ADDR 0x30000000 -#define MX51_IPU_CTRL_BASE_ADDR 0x40000000 -#define MX51_CSD0_BASE_ADDR 0x90000000 -#define MX51_CSD1_BASE_ADDR 0xA0000000 -#define MX51_CS0_BASE_ADDR 0xB0000000 -#define MX51_CS1_BASE_ADDR 0xB8000000 -#define MX51_CS2_BASE_ADDR 0xC0000000 -#define MX51_CS3_BASE_ADDR 0xC8000000 -#define MX51_CS4_BASE_ADDR 0xCC000000 -#define MX51_CS5_BASE_ADDR 0xCE000000 - -/* Does given address belongs to the specified memory region? */ -#define ADDRESS_IN_REGION(addr, start, size) \ - (((addr) >= (start)) && ((addr) < (start)+(size))) - -/* Does given address belongs to the specified named `module'? */ -#define MX51_IS_MODULE(addr, module) \ - ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \ - MX51_ ## module ## _SIZE) -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. If the physical address is not mapped, - * it returns 0xDEADBEEF - */ - -#define MX51_IO_ADDRESS(x) \ - (void __iomem *) \ - (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - 0xDEADBEEF) - -/* - * define the address mapping macros: in physical address order - */ -#define MX51_IRAM_IO_ADDRESS(x) \ - (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) - -#define MX51_DEBUG_IO_ADDRESS(x) \ - (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) - -#define MX51_SPBA0_IO_ADDRESS(x) \ - (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT) - -#define MX51_AIPS1_IO_ADDRESS(x) \ - (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT) - -#define MX51_AIPS2_IO_ADDRESS(x) \ - (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* * DMA request assignments */ -#define MX51_DMA_REQ_SSI3_TX1 47 -#define MX51_DMA_REQ_SSI3_RX1 46 -#define MX51_DMA_REQ_SPDIF 45 -#define MX51_DMA_REQ_UART3_TX 44 -#define MX51_DMA_REQ_UART3_RX 43 -#define MX51_DMA_REQ_SLIM_B_TX 42 -#define MX51_DMA_REQ_SDHC4 41 -#define MX51_DMA_REQ_SDHC3 40 -#define MX51_DMA_REQ_CSPI_TX 39 -#define MX51_DMA_REQ_CSPI_RX 38 -#define MX51_DMA_REQ_SSI3_TX2 37 -#define MX51_DMA_REQ_IPU 36 -#define MX51_DMA_REQ_SSI3_RX2 35 -#define MX51_DMA_REQ_EPIT2 34 -#define MX51_DMA_REQ_CTI2_1 33 -#define MX51_DMA_REQ_EMI_WR 32 -#define MX51_DMA_REQ_CTI2_0 31 -#define MX51_DMA_REQ_EMI_RD 30 -#define MX51_DMA_REQ_SSI1_TX1 29 -#define MX51_DMA_REQ_SSI1_RX1 28 -#define MX51_DMA_REQ_SSI1_TX2 27 -#define MX51_DMA_REQ_SSI1_RX2 26 -#define MX51_DMA_REQ_SSI2_TX1 25 -#define MX51_DMA_REQ_SSI2_RX1 24 -#define MX51_DMA_REQ_SSI2_TX2 23 -#define MX51_DMA_REQ_SSI2_RX2 22 -#define MX51_DMA_REQ_SDHC2 21 -#define MX51_DMA_REQ_SDHC1 20 -#define MX51_DMA_REQ_UART1_TX 19 -#define MX51_DMA_REQ_UART1_RX 18 -#define MX51_DMA_REQ_UART2_TX 17 -#define MX51_DMA_REQ_UART2_RX 16 -#define MX51_DMA_REQ_GPU 15 -#define MX51_DMA_REQ_EXTREQ1 14 -#define MX51_DMA_REQ_FIRI_TX 13 -#define MX51_DMA_REQ_FIRI_RX 12 -#define MX51_DMA_REQ_HS_I2C_RX 11 -#define MX51_DMA_REQ_HS_I2C_TX 10 -#define MX51_DMA_REQ_CSPI2_TX 9 -#define MX51_DMA_REQ_CSPI2_RX 8 -#define MX51_DMA_REQ_CSPI1_TX 7 -#define MX51_DMA_REQ_CSPI1_RX 6 -#define MX51_DMA_REQ_SLIM_B 5 -#define MX51_DMA_REQ_ATA_TX_END 4 -#define MX51_DMA_REQ_ATA_TX 3 -#define MX51_DMA_REQ_ATA_RX 2 -#define MX51_DMA_REQ_GPC 1 -#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_VPU 0 +#define MX51_DMA_REQ_GPC 1 +#define MX51_DMA_REQ_ATA_RX 2 +#define MX51_DMA_REQ_ATA_TX 3 +#define MX51_DMA_REQ_ATA_TX_END 4 +#define MX51_DMA_REQ_SLIM_B 5 +#define MX51_DMA_REQ_CSPI1_RX 6 +#define MX51_DMA_REQ_CSPI1_TX 7 +#define MX51_DMA_REQ_CSPI2_RX 8 +#define MX51_DMA_REQ_CSPI2_TX 9 +#define MX51_DMA_REQ_HS_I2C_TX 10 +#define MX51_DMA_REQ_HS_I2C_RX 11 +#define MX51_DMA_REQ_FIRI_RX 12 +#define MX51_DMA_REQ_FIRI_TX 13 +#define MX51_DMA_REQ_EXTREQ1 14 +#define MX51_DMA_REQ_GPU 15 +#define MX51_DMA_REQ_UART2_RX 16 +#define MX51_DMA_REQ_UART2_TX 17 +#define MX51_DMA_REQ_UART1_RX 18 +#define MX51_DMA_REQ_UART1_TX 19 +#define MX51_DMA_REQ_SDHC1 20 +#define MX51_DMA_REQ_SDHC2 21 +#define MX51_DMA_REQ_SSI2_RX1 22 +#define MX51_DMA_REQ_SSI2_TX1 23 +#define MX51_DMA_REQ_SSI2_RX0 24 +#define MX51_DMA_REQ_SSI2_TX0 25 +#define MX51_DMA_REQ_SSI1_RX1 26 +#define MX51_DMA_REQ_SSI1_TX1 27 +#define MX51_DMA_REQ_SSI1_RX0 28 +#define MX51_DMA_REQ_SSI1_TX0 29 +#define MX51_DMA_REQ_EMI_RD 30 +#define MX51_DMA_REQ_CTI2_0 31 +#define MX51_DMA_REQ_EMI_WR 32 +#define MX51_DMA_REQ_CTI2_1 33 +#define MX51_DMA_REQ_EPIT2 34 +#define MX51_DMA_REQ_SSI3_RX2 35 +#define MX51_DMA_REQ_IPU 36 +#define MX51_DMA_REQ_SSI3_TX2 37 +#define MX51_DMA_REQ_CSPI_RX 38 +#define MX51_DMA_REQ_CSPI_TX 39 +#define MX51_DMA_REQ_SDHC3 40 +#define MX51_DMA_REQ_SDHC4 41 +#define MX51_DMA_REQ_SLIM_B_TX 42 +#define MX51_DMA_REQ_UART3_RX 43 +#define MX51_DMA_REQ_UART3_TX 44 +#define MX51_DMA_REQ_SPDIF 45 +#define MX51_DMA_REQ_SSI3_RX1 46 +#define MX51_DMA_REQ_SSI3_TX1 47 /* * Interrupt numbers */ -#define MX51_MXC_INT_BASE 0 -#define MX51_MXC_INT_RESV0 0 -#define MX51_MXC_INT_MMC_SDHC1 1 -#define MX51_MXC_INT_MMC_SDHC2 2 -#define MX51_MXC_INT_MMC_SDHC3 3 -#define MX51_MXC_INT_MMC_SDHC4 4 -#define MX51_MXC_INT_RESV5 5 -#define MX51_MXC_INT_SDMA 6 -#define MX51_MXC_INT_IOMUX 7 -#define MX51_MXC_INT_NFC 8 -#define MX51_MXC_INT_VPU 9 -#define MX51_MXC_INT_IPU_ERR 10 -#define MX51_MXC_INT_IPU_SYN 11 -#define MX51_MXC_INT_GPU 12 -#define MX51_MXC_INT_RESV13 13 -#define MX51_MXC_INT_USB_H1 14 -#define MX51_MXC_INT_EMI 15 -#define MX51_MXC_INT_USB_H2 16 -#define MX51_MXC_INT_USB_H3 17 -#define MX51_MXC_INT_USB_OTG 18 -#define MX51_MXC_INT_SAHARA_H0 19 -#define MX51_MXC_INT_SAHARA_H1 20 -#define MX51_MXC_INT_SCC_SMN 21 -#define MX51_MXC_INT_SCC_STZ 22 -#define MX51_MXC_INT_SCC_SCM 23 -#define MX51_MXC_INT_SRTC_NTZ 24 -#define MX51_MXC_INT_SRTC_TZ 25 -#define MX51_MXC_INT_RTIC 26 -#define MX51_MXC_INT_CSU 27 -#define MX51_MXC_INT_SLIM_B 28 -#define MX51_MXC_INT_SSI1 29 -#define MX51_MXC_INT_SSI2 30 -#define MX51_MXC_INT_UART1 31 -#define MX51_MXC_INT_UART2 32 -#define MX51_MXC_INT_UART3 33 -#define MX51_MXC_INT_RESV34 34 -#define MX51_MXC_INT_RESV35 35 -#define MX51_MXC_INT_CSPI1 36 -#define MX51_MXC_INT_CSPI2 37 -#define MX51_MXC_INT_CSPI 38 -#define MX51_MXC_INT_GPT 39 -#define MX51_MXC_INT_EPIT1 40 -#define MX51_MXC_INT_EPIT2 41 -#define MX51_MXC_INT_GPIO1_INT7 42 -#define MX51_MXC_INT_GPIO1_INT6 43 -#define MX51_MXC_INT_GPIO1_INT5 44 -#define MX51_MXC_INT_GPIO1_INT4 45 -#define MX51_MXC_INT_GPIO1_INT3 46 -#define MX51_MXC_INT_GPIO1_INT2 47 -#define MX51_MXC_INT_GPIO1_INT1 48 -#define MX51_MXC_INT_GPIO1_INT0 49 -#define MX51_MXC_INT_GPIO1_LOW 50 -#define MX51_MXC_INT_GPIO1_HIGH 51 -#define MX51_MXC_INT_GPIO2_LOW 52 -#define MX51_MXC_INT_GPIO2_HIGH 53 -#define MX51_MXC_INT_GPIO3_LOW 54 -#define MX51_MXC_INT_GPIO3_HIGH 55 -#define MX51_MXC_INT_GPIO4_LOW 56 -#define MX51_MXC_INT_GPIO4_HIGH 57 -#define MX51_MXC_INT_WDOG1 58 -#define MX51_MXC_INT_WDOG2 59 -#define MX51_MXC_INT_KPP 60 -#define MX51_MXC_INT_PWM1 61 -#define MX51_MXC_INT_I2C1 62 -#define MX51_MXC_INT_I2C2 63 -#define MX51_MXC_INT_HS_I2C 64 -#define MX51_MXC_INT_RESV65 65 -#define MX51_MXC_INT_RESV66 66 -#define MX51_MXC_INT_SIM_IPB 67 -#define MX51_MXC_INT_SIM_DAT 68 -#define MX51_MXC_INT_IIM 69 -#define MX51_MXC_INT_ATA 70 -#define MX51_MXC_INT_CCM1 71 -#define MX51_MXC_INT_CCM2 72 -#define MX51_MXC_INT_GPC1 73 -#define MX51_MXC_INT_GPC2 74 -#define MX51_MXC_INT_SRC 75 -#define MX51_MXC_INT_NM 76 -#define MX51_MXC_INT_PMU 77 -#define MX51_MXC_INT_CTI_IRQ 78 -#define MX51_MXC_INT_CTI1_TG0 79 -#define MX51_MXC_INT_CTI1_TG1 80 -#define MX51_MXC_INT_MCG_ERR 81 -#define MX51_MXC_INT_MCG_TMR 82 -#define MX51_MXC_INT_MCG_FUNC 83 -#define MX51_MXC_INT_GPU2_IRQ 84 -#define MX51_MXC_INT_GPU2_BUSY 85 -#define MX51_MXC_INT_RESV86 86 -#define MX51_MXC_INT_FEC 87 -#define MX51_MXC_INT_OWIRE 88 -#define MX51_MXC_INT_CTI1_TG2 89 -#define MX51_MXC_INT_SJC 90 -#define MX51_MXC_INT_SPDIF 91 -#define MX51_MXC_INT_TVE 92 -#define MX51_MXC_INT_FIRI 93 -#define MX51_MXC_INT_PWM2 94 -#define MX51_MXC_INT_SLIM_EXP 95 -#define MX51_MXC_INT_SSI3 96 -#define MX51_MXC_INT_EMI_BOOT 97 -#define MX51_MXC_INT_CTI1_TG3 98 -#define MX51_MXC_INT_SMC_RX 99 -#define MX51_MXC_INT_VPU_IDLE 100 -#define MX51_MXC_INT_EMI_NFC 101 -#define MX51_MXC_INT_GPU_IDLE 102 +#define MX51_MXC_INT_BASE 0 +#define MX51_MXC_INT_RESV0 0 +#define MX51_MXC_INT_MMC_SDHC1 1 +#define MX51_MXC_INT_MMC_SDHC2 2 +#define MX51_MXC_INT_MMC_SDHC3 3 +#define MX51_MXC_INT_MMC_SDHC4 4 +#define MX51_MXC_INT_RESV5 5 +#define MX51_INT_SDMA 6 +#define MX51_MXC_INT_IOMUX 7 +#define MX51_INT_NFC 8 +#define MX51_MXC_INT_VPU 9 +#define MX51_MXC_INT_IPU_ERR 10 +#define MX51_MXC_INT_IPU_SYN 11 +#define MX51_MXC_INT_GPU 12 +#define MX51_MXC_INT_RESV13 13 +#define MX51_MXC_INT_USB_H1 14 +#define MX51_MXC_INT_EMI 15 +#define MX51_MXC_INT_USB_H2 16 +#define MX51_MXC_INT_USB_H3 17 +#define MX51_MXC_INT_USB_OTG 18 +#define MX51_MXC_INT_SAHARA_H0 19 +#define MX51_MXC_INT_SAHARA_H1 20 +#define MX51_MXC_INT_SCC_SMN 21 +#define MX51_MXC_INT_SCC_STZ 22 +#define MX51_MXC_INT_SCC_SCM 23 +#define MX51_MXC_INT_SRTC_NTZ 24 +#define MX51_MXC_INT_SRTC_TZ 25 +#define MX51_MXC_INT_RTIC 26 +#define MX51_MXC_INT_CSU 27 +#define MX51_MXC_INT_SLIM_B 28 +#define MX51_INT_SSI1 29 +#define MX51_INT_SSI2 30 +#define MX51_INT_UART1 31 +#define MX51_INT_UART2 32 +#define MX51_INT_UART3 33 +#define MX51_MXC_INT_RESV34 34 +#define MX51_MXC_INT_RESV35 35 +#define MX51_INT_ECSPI1 36 +#define MX51_INT_ECSPI2 37 +#define MX51_INT_CSPI 38 +#define MX51_MXC_INT_GPT 39 +#define MX51_MXC_INT_EPIT1 40 +#define MX51_MXC_INT_EPIT2 41 +#define MX51_MXC_INT_GPIO1_INT7 42 +#define MX51_MXC_INT_GPIO1_INT6 43 +#define MX51_MXC_INT_GPIO1_INT5 44 +#define MX51_MXC_INT_GPIO1_INT4 45 +#define MX51_MXC_INT_GPIO1_INT3 46 +#define MX51_MXC_INT_GPIO1_INT2 47 +#define MX51_MXC_INT_GPIO1_INT1 48 +#define MX51_MXC_INT_GPIO1_INT0 49 +#define MX51_MXC_INT_GPIO1_LOW 50 +#define MX51_MXC_INT_GPIO1_HIGH 51 +#define MX51_MXC_INT_GPIO2_LOW 52 +#define MX51_MXC_INT_GPIO2_HIGH 53 +#define MX51_MXC_INT_GPIO3_LOW 54 +#define MX51_MXC_INT_GPIO3_HIGH 55 +#define MX51_MXC_INT_GPIO4_LOW 56 +#define MX51_MXC_INT_GPIO4_HIGH 57 +#define MX51_MXC_INT_WDOG1 58 +#define MX51_MXC_INT_WDOG2 59 +#define MX51_MXC_INT_KPP 60 +#define MX51_MXC_INT_PWM1 61 +#define MX51_INT_I2C1 62 +#define MX51_INT_I2C2 63 +#define MX51_MXC_INT_HS_I2C 64 +#define MX51_MXC_INT_RESV65 65 +#define MX51_MXC_INT_RESV66 66 +#define MX51_MXC_INT_SIM_IPB 67 +#define MX51_MXC_INT_SIM_DAT 68 +#define MX51_MXC_INT_IIM 69 +#define MX51_MXC_INT_ATA 70 +#define MX51_MXC_INT_CCM1 71 +#define MX51_MXC_INT_CCM2 72 +#define MX51_MXC_INT_GPC1 73 +#define MX51_MXC_INT_GPC2 74 +#define MX51_MXC_INT_SRC 75 +#define MX51_MXC_INT_NM 76 +#define MX51_MXC_INT_PMU 77 +#define MX51_MXC_INT_CTI_IRQ 78 +#define MX51_MXC_INT_CTI1_TG0 79 +#define MX51_MXC_INT_CTI1_TG1 80 +#define MX51_MXC_INT_MCG_ERR 81 +#define MX51_MXC_INT_MCG_TMR 82 +#define MX51_MXC_INT_MCG_FUNC 83 +#define MX51_MXC_INT_GPU2_IRQ 84 +#define MX51_MXC_INT_GPU2_BUSY 85 +#define MX51_MXC_INT_RESV86 86 +#define MX51_INT_FEC 87 +#define MX51_MXC_INT_OWIRE 88 +#define MX51_MXC_INT_CTI1_TG2 89 +#define MX51_MXC_INT_SJC 90 +#define MX51_MXC_INT_SPDIF 91 +#define MX51_MXC_INT_TVE 92 +#define MX51_MXC_INT_FIRI 93 +#define MX51_MXC_INT_PWM2 94 +#define MX51_MXC_INT_SLIM_EXP 95 +#define MX51_MXC_INT_SSI3 96 +#define MX51_MXC_INT_EMI_BOOT 97 +#define MX51_MXC_INT_CTI1_TG3 98 +#define MX51_MXC_INT_SMC_RX 99 +#define MX51_MXC_INT_VPU_IDLE 100 +#define MX51_MXC_INT_EMI_NFC 101 +#define MX51_MXC_INT_GPU_IDLE 102 /* silicon revisions specific to i.MX51 */ -#define MX51_CHIP_REV_1_0 0x10 -#define MX51_CHIP_REV_1_1 0x11 -#define MX51_CHIP_REV_1_2 0x12 -#define MX51_CHIP_REV_1_3 0x13 -#define MX51_CHIP_REV_2_0 0x20 -#define MX51_CHIP_REV_2_1 0x21 -#define MX51_CHIP_REV_2_2 0x22 -#define MX51_CHIP_REV_2_3 0x23 -#define MX51_CHIP_REV_3_0 0x30 -#define MX51_CHIP_REV_3_1 0x31 -#define MX51_CHIP_REV_3_2 0x32 - -/* Mandatory defines used globally */ +#define MX51_CHIP_REV_1_0 0x10 +#define MX51_CHIP_REV_1_1 0x11 +#define MX51_CHIP_REV_1_2 0x12 +#define MX51_CHIP_REV_1_3 0x13 +#define MX51_CHIP_REV_2_0 0x20 +#define MX51_CHIP_REV_2_1 0x21 +#define MX51_CHIP_REV_2_2 0x22 +#define MX51_CHIP_REV_2_3 0x23 +#define MX51_CHIP_REV_3_0 0x30 +#define MX51_CHIP_REV_3_1 0x31 +#define MX51_CHIP_REV_3_2 0x32 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) - extern int mx51_revision(void); #endif -#endif /* __ASM_ARCH_MXC_MX51_H__ */ +/* tape-out 1 defines */ +#define MX51_TZIC_BASE_ADDR_TO1 0x8fffc000 + +#endif /* ifndef __MACH_MX51_H__ */ diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 91c2f4f3af1..7e631fa5109 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -143,10 +143,26 @@ config SPI_GPIO GPIO operations, you should be able to leverage that for better speed with a custom version of this driver; see the source code. +config SPI_IMX_VER_IMX1 + def_bool y if SOC_IMX1 + +config SPI_IMX_VER_0_0 + def_bool y if SOC_IMX21 || SOC_IMX27 + +config SPI_IMX_VER_0_4 + def_bool y if ARCH_MX31 + +config SPI_IMX_VER_0_7 + def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51 + +config SPI_IMX_VER_2_3 + def_bool y if ARCH_MX51 + config SPI_IMX tristate "Freescale i.MX SPI controllers" depends on ARCH_MXC select SPI_BITBANG + default m if IMX_HAVE_PLATFORM_SPI_IMX help This enables using the Freescale i.MX SPI controllers in master mode. diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c index 7972e907747..55a38e2c6c1 100644 --- a/drivers/spi/spi_imx.c +++ b/drivers/spi/spi_imx.c @@ -56,7 +56,28 @@ struct spi_imx_config { unsigned int speed_hz; unsigned int bpw; unsigned int mode; - int cs; + u8 cs; +}; + +enum spi_imx_devtype { + SPI_IMX_VER_IMX1, + SPI_IMX_VER_0_0, + SPI_IMX_VER_0_4, + SPI_IMX_VER_0_5, + SPI_IMX_VER_0_7, + SPI_IMX_VER_2_3, + SPI_IMX_VER_AUTODETECT, +}; + +struct spi_imx_data; + +struct spi_imx_devtype_data { + void (*intctrl)(struct spi_imx_data *, int); + int (*config)(struct spi_imx_data *, struct spi_imx_config *); + void (*trigger)(struct spi_imx_data *); + int (*rx_available)(struct spi_imx_data *); + void (*reset)(struct spi_imx_data *); + unsigned int fifosize; }; struct spi_imx_data { @@ -76,11 +97,7 @@ struct spi_imx_data { const void *tx_buf; unsigned int txfifo; /* number of words pushed in tx FIFO */ - /* SoC specific functions */ - void (*intctrl)(struct spi_imx_data *, int); - int (*config)(struct spi_imx_data *, struct spi_imx_config *); - void (*trigger)(struct spi_imx_data *); - int (*rx_available)(struct spi_imx_data *); + struct spi_imx_devtype_data devtype_data; }; #define MXC_SPI_BUF_RX(type) \ @@ -140,7 +157,7 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin, return max; } -/* MX1, MX31, MX35 */ +/* MX1, MX31, MX35, MX51 CSPI */ static unsigned int spi_imx_clkdiv_2(unsigned int fin, unsigned int fspi) { @@ -155,6 +172,128 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, return 7; } +#define SPI_IMX2_3_CTRL 0x08 +#define SPI_IMX2_3_CTRL_ENABLE (1 << 0) +#define SPI_IMX2_3_CTRL_XCH (1 << 2) +#define SPI_IMX2_3_CTRL_MODE(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8 +#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12 +#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18) +#define SPI_IMX2_3_CTRL_BL_OFFSET 20 + +#define SPI_IMX2_3_CONFIG 0x0c +#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) +#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) +#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) +#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) + +#define SPI_IMX2_3_INT 0x10 +#define SPI_IMX2_3_INT_TEEN (1 << 0) +#define SPI_IMX2_3_INT_RREN (1 << 3) + +#define SPI_IMX2_3_STAT 0x18 +#define SPI_IMX2_3_STAT_RR (1 << 3) + +/* MX51 eCSPI */ +static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi) +{ + /* + * there are two 4-bit dividers, the pre-divider divides by + * $pre, the post-divider by 2^$post + */ + unsigned int pre, post; + + if (unlikely(fspi > fin)) + return 0; + + post = fls(fin) - fls(fspi); + if (fin > fspi << post) + post++; + + /* now we have: (fin <= fspi << post) with post being minimal */ + + post = max(4U, post) - 4; + if (unlikely(post > 0xf)) { + pr_err("%s: cannot set clock freq: %u (base freq: %u)\n", + __func__, fspi, fin); + return 0xff; + } + + pre = DIV_ROUND_UP(fin, fspi << post) - 1; + + pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n", + __func__, fin, fspi, post, pre); + return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) | + (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET); +} + +static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable) +{ + unsigned val = 0; + + if (enable & MXC_INT_TE) + val |= SPI_IMX2_3_INT_TEEN; + + if (enable & MXC_INT_RR) + val |= SPI_IMX2_3_INT_RREN; + + writel(val, spi_imx->base + SPI_IMX2_3_INT); +} + +static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx) +{ + u32 reg; + + reg = readl(spi_imx->base + SPI_IMX2_3_CTRL); + reg |= SPI_IMX2_3_CTRL_XCH; + writel(reg, spi_imx->base + SPI_IMX2_3_CTRL); +} + +static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0; + + /* set master mode */ + ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs); + + /* set clock speed */ + ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz); + + /* set chip select to use */ + ctrl |= SPI_IMX2_3_CTRL_CS(config->cs); + + ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET; + + cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs); + + if (config->mode & SPI_CPHA) + cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs); + + if (config->mode & SPI_CPOL) + cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs); + + if (config->mode & SPI_CS_HIGH) + cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs); + + writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL); + writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG); + + return 0; +} + +static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx) +{ + return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR; +} + +static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (spi_imx2_3_rx_available(spi_imx)) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + #define MX31_INTREG_TEEN (1 << 0) #define MX31_INTREG_RREN (1 << 3) @@ -178,7 +317,7 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin, * the i.MX35 has a slightly different register layout for bits * we do not use here. */ -static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx31_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -190,7 +329,7 @@ static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx31_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx31_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -199,20 +338,16 @@ static void mx31_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx31_config(struct spi_imx_data *spi_imx, +static int __maybe_unused spi_imx0_4_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << MX31_CSPICTRL_DR_SHIFT; - if (cpu_is_mx31()) - reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; - else if (cpu_is_mx25() || cpu_is_mx35()) { - reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; - reg |= MX31_CSPICTRL_SSCTL; - } + reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT; if (config->mode & SPI_CPHA) reg |= MX31_CSPICTRL_PHA; @@ -220,23 +355,52 @@ static int mx31_config(struct spi_imx_data *spi_imx, reg |= MX31_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) reg |= MX31_CSPICTRL_SSPOL; - if (config->cs < 0) { - if (cpu_is_mx31()) - reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT; - else if (cpu_is_mx25() || cpu_is_mx35()) - reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT; - } + if (cs < 0) + reg |= (cs + 32) << MX31_CSPICTRL_CS_SHIFT; + + writel(reg, spi_imx->base + MXC_CSPICTRL); + + return 0; +} + +static int __maybe_unused spi_imx0_7_config(struct spi_imx_data *spi_imx, + struct spi_imx_config *config) +{ + unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; + + reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) << + MX31_CSPICTRL_DR_SHIFT; + + reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT; + reg |= MX31_CSPICTRL_SSCTL; + + if (config->mode & SPI_CPHA) + reg |= MX31_CSPICTRL_PHA; + if (config->mode & SPI_CPOL) + reg |= MX31_CSPICTRL_POL; + if (config->mode & SPI_CS_HIGH) + reg |= MX31_CSPICTRL_SSPOL; + if (cs < 0) + reg |= (cs + 32) << MX35_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx31_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx31_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR; } +static void __maybe_unused spi_imx0_4_reset(struct spi_imx_data *spi_imx) +{ + /* drain receive buffer */ + while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) + readl(spi_imx->base + MXC_CSPIRXDATA); +} + #define MX27_INTREG_RR (1 << 4) #define MX27_INTREG_TEEN (1 << 9) #define MX27_INTREG_RREN (1 << 13) @@ -250,7 +414,7 @@ static int mx31_rx_available(struct spi_imx_data *spi_imx) #define MX27_CSPICTRL_DR_SHIFT 14 #define MX27_CSPICTRL_CS_SHIFT 19 -static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx27_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -262,7 +426,7 @@ static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx27_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx27_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -271,10 +435,11 @@ static void mx27_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx27_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx27_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER; + int cs = spi_imx->chipselect[config->cs]; reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) << MX27_CSPICTRL_DR_SHIFT; @@ -286,19 +451,24 @@ static int mx27_config(struct spi_imx_data *spi_imx, reg |= MX27_CSPICTRL_POL; if (config->mode & SPI_CS_HIGH) reg |= MX27_CSPICTRL_SSPOL; - if (config->cs < 0) - reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT; + if (cs < 0) + reg |= (cs + 32) << MX27_CSPICTRL_CS_SHIFT; writel(reg, spi_imx->base + MXC_CSPICTRL); return 0; } -static int mx27_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx27_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR; } +static void __maybe_unused spi_imx0_0_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + #define MX1_INTREG_RR (1 << 3) #define MX1_INTREG_TEEN (1 << 8) #define MX1_INTREG_RREN (1 << 11) @@ -310,7 +480,7 @@ static int mx27_rx_available(struct spi_imx_data *spi_imx) #define MX1_CSPICTRL_MASTER (1 << 10) #define MX1_CSPICTRL_DR_SHIFT 13 -static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) +static void __maybe_unused mx1_intctrl(struct spi_imx_data *spi_imx, int enable) { unsigned int val = 0; @@ -322,7 +492,7 @@ static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable) writel(val, spi_imx->base + MXC_CSPIINT); } -static void mx1_trigger(struct spi_imx_data *spi_imx) +static void __maybe_unused mx1_trigger(struct spi_imx_data *spi_imx) { unsigned int reg; @@ -331,7 +501,7 @@ static void mx1_trigger(struct spi_imx_data *spi_imx) writel(reg, spi_imx->base + MXC_CSPICTRL); } -static int mx1_config(struct spi_imx_data *spi_imx, +static int __maybe_unused mx1_config(struct spi_imx_data *spi_imx, struct spi_imx_config *config) { unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER; @@ -350,11 +520,73 @@ static int mx1_config(struct spi_imx_data *spi_imx, return 0; } -static int mx1_rx_available(struct spi_imx_data *spi_imx) +static int __maybe_unused mx1_rx_available(struct spi_imx_data *spi_imx) { return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR; } +static void __maybe_unused mx1_reset(struct spi_imx_data *spi_imx) +{ + writel(1, spi_imx->base + MXC_RESET); +} + +/* + * These version numbers are taken from the Freescale driver. Unfortunately it + * doesn't support i.MX1, so this entry doesn't match the scheme. :-( + */ +static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = { +#ifdef CONFIG_SPI_IMX_VER_IMX1 + [SPI_IMX_VER_IMX1] = { + .intctrl = mx1_intctrl, + .config = mx1_config, + .trigger = mx1_trigger, + .rx_available = mx1_rx_available, + .reset = mx1_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_0 + [SPI_IMX_VER_0_0] = { + .intctrl = mx27_intctrl, + .config = mx27_config, + .trigger = mx27_trigger, + .rx_available = mx27_rx_available, + .reset = spi_imx0_0_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_4 + [SPI_IMX_VER_0_4] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_4_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_0_7 + [SPI_IMX_VER_0_7] = { + .intctrl = mx31_intctrl, + .config = spi_imx0_7_config, + .trigger = mx31_trigger, + .rx_available = mx31_rx_available, + .reset = spi_imx0_4_reset, + .fifosize = 8, + }, +#endif +#ifdef CONFIG_SPI_IMX_VER_2_3 + [SPI_IMX_VER_2_3] = { + .intctrl = spi_imx2_3_intctrl, + .config = spi_imx2_3_config, + .trigger = spi_imx2_3_trigger, + .rx_available = spi_imx2_3_rx_available, + .reset = spi_imx2_3_reset, + .fifosize = 64, + }, +#endif +}; + static void spi_imx_chipselect(struct spi_device *spi, int is_active) { struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master); @@ -370,21 +602,21 @@ static void spi_imx_chipselect(struct spi_device *spi, int is_active) static void spi_imx_push(struct spi_imx_data *spi_imx) { - while (spi_imx->txfifo < 8) { + while (spi_imx->txfifo < spi_imx->devtype_data.fifosize) { if (!spi_imx->count) break; spi_imx->tx(spi_imx); spi_imx->txfifo++; } - spi_imx->trigger(spi_imx); + spi_imx->devtype_data.trigger(spi_imx); } static irqreturn_t spi_imx_isr(int irq, void *dev_id) { struct spi_imx_data *spi_imx = dev_id; - while (spi_imx->rx_available(spi_imx)) { + while (spi_imx->devtype_data.rx_available(spi_imx)) { spi_imx->rx(spi_imx); spi_imx->txfifo--; } @@ -398,11 +630,12 @@ static irqreturn_t spi_imx_isr(int irq, void *dev_id) /* No data left to push, but still waiting for rx data, * enable receive data available interrupt. */ - spi_imx->intctrl(spi_imx, MXC_INT_RR); + spi_imx->devtype_data.intctrl( + spi_imx, MXC_INT_RR); return IRQ_HANDLED; } - spi_imx->intctrl(spi_imx, 0); + spi_imx->devtype_data.intctrl(spi_imx, 0); complete(&spi_imx->xfer_done); return IRQ_HANDLED; @@ -417,7 +650,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, config.bpw = t ? t->bits_per_word : spi->bits_per_word; config.speed_hz = t ? t->speed_hz : spi->max_speed_hz; config.mode = spi->mode; - config.cs = spi_imx->chipselect[spi->chip_select]; + config.cs = spi->chip_select; if (!config.speed_hz) config.speed_hz = spi->max_speed_hz; @@ -439,7 +672,7 @@ static int spi_imx_setupxfer(struct spi_device *spi, } else BUG(); - spi_imx->config(spi_imx, &config); + spi_imx->devtype_data.config(spi_imx, &config); return 0; } @@ -458,7 +691,7 @@ static int spi_imx_transfer(struct spi_device *spi, spi_imx_push(spi_imx); - spi_imx->intctrl(spi_imx, MXC_INT_TE); + spi_imx->devtype_data.intctrl(spi_imx, MXC_INT_TE); wait_for_completion(&spi_imx->xfer_done); @@ -485,6 +718,39 @@ static void spi_imx_cleanup(struct spi_device *spi) { } +static struct platform_device_id spi_imx_devtype[] = { + { + .name = DRIVER_NAME, + .driver_data = SPI_IMX_VER_AUTODETECT, + }, { + .name = "imx1-cspi", + .driver_data = SPI_IMX_VER_IMX1, + }, { + .name = "imx21-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx25-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx27-cspi", + .driver_data = SPI_IMX_VER_0_0, + }, { + .name = "imx31-cspi", + .driver_data = SPI_IMX_VER_0_4, + }, { + .name = "imx35-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-cspi", + .driver_data = SPI_IMX_VER_0_7, + }, { + .name = "imx51-ecspi", + .driver_data = SPI_IMX_VER_2_3, + }, { + /* sentinel */ + } +}; + static int __devinit spi_imx_probe(struct platform_device *pdev) { struct spi_imx_master *mxc_platform_info; @@ -536,6 +802,31 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) init_completion(&spi_imx->xfer_done); + if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) { + if (cpu_is_mx25() || cpu_is_mx35()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_7]; + else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_4]; + else if (cpu_is_mx27() || cpu_is_mx21()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_0_0]; + else if (cpu_is_mx1()) + spi_imx->devtype_data = + spi_imx_devtype_data[SPI_IMX_VER_IMX1]; + else + BUG(); + } else + spi_imx->devtype_data = + spi_imx_devtype_data[pdev->id_entry->driver_data]; + + if (!spi_imx->devtype_data.intctrl) { + dev_err(&pdev->dev, "no support for this device compiled in\n"); + ret = -ENODEV; + goto out_gpio_free; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "can't get platform resource\n"); @@ -567,24 +858,6 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) goto out_iounmap; } - if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) { - spi_imx->intctrl = mx31_intctrl; - spi_imx->config = mx31_config; - spi_imx->trigger = mx31_trigger; - spi_imx->rx_available = mx31_rx_available; - } else if (cpu_is_mx27() || cpu_is_mx21()) { - spi_imx->intctrl = mx27_intctrl; - spi_imx->config = mx27_config; - spi_imx->trigger = mx27_trigger; - spi_imx->rx_available = mx27_rx_available; - } else if (cpu_is_mx1()) { - spi_imx->intctrl = mx1_intctrl; - spi_imx->config = mx1_config; - spi_imx->trigger = mx1_trigger; - spi_imx->rx_available = mx1_rx_available; - } else - BUG(); - spi_imx->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(spi_imx->clk)) { dev_err(&pdev->dev, "unable to get clock\n"); @@ -595,15 +868,9 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) clk_enable(spi_imx->clk); spi_imx->spi_clk = clk_get_rate(spi_imx->clk); - if (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) - writel(1, spi_imx->base + MXC_RESET); - - /* drain receive buffer */ - if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35()) - while (readl(spi_imx->base + MX3_CSPISTAT) & MX3_CSPISTAT_RR) - readl(spi_imx->base + MXC_CSPIRXDATA); + spi_imx->devtype_data.reset(spi_imx); - spi_imx->intctrl(spi_imx, 0); + spi_imx->devtype_data.intctrl(spi_imx, 0); ret = spi_bitbang_start(&spi_imx->bitbang); if (ret) { @@ -668,6 +935,7 @@ static struct platform_driver spi_imx_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, }, + .id_table = spi_imx_devtype, .probe = spi_imx_probe, .remove = __devexit_p(spi_imx_remove), }; |