diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-mpu6050 | 13 | ||||
| -rw-r--r-- | drivers/iio/imu/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/iio/imu/Makefile | 2 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/Kconfig | 13 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/Makefile | 6 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 795 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 246 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 196 | ||||
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 155 | ||||
| -rw-r--r-- | include/linux/platform_data/invensense_mpu6050.h | 31 |
10 files changed, 1459 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 new file mode 100644 index 00000000000..cb53737aacb --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 @@ -0,0 +1,13 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_accel_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_magn_matrix +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + This is mounting matrix for motion sensors. Mounting matrix + is a 3x3 unitary matrix. A typical mounting matrix would look like + [0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be + easy to tell the relative positions among sensors as well as their + positions relative to the board that holds these sensors. Identity matrix + [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly + aligned with each other. All axes are exactly the same. diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 47f66ed9c4e..4f40a10cb74 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -36,3 +36,5 @@ config IIO_ADIS_LIB_BUFFER help A set of buffer helper functions for the Analog Devices ADIS* device family. + +source "drivers/iio/imu/inv_mpu6050/Kconfig" diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index 019b717c5ff..f2f56ceaed2 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -11,3 +11,5 @@ adis_lib-y += adis.o adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_trigger.o adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o + +obj-y += inv_mpu6050/ diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig new file mode 100644 index 00000000000..b5cfa3a354c --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/Kconfig @@ -0,0 +1,13 @@ +# +# inv-mpu6050 drivers for Invensense MPU devices and combos +# + +config INV_MPU6050_IIO + tristate "Invensense MPU6050 devices" + depends on I2C && SYSFS + select IIO_TRIGGERED_BUFFER + help + This driver supports the Invensense MPU6050 devices. + It is a gyroscope/accelerometer combo device. + This driver can be built as a module. The module will be called + inv-mpu6050. diff --git a/drivers/iio/imu/inv_mpu6050/Makefile b/drivers/iio/imu/inv_mpu6050/Makefile new file mode 100644 index 00000000000..3a677c778af --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for Invensense MPU6050 device. +# + +obj-$(CONFIG_INV_MPU6050_IIO) += inv-mpu6050.o +inv-mpu6050-objs := inv_mpu_core.o inv_mpu_ring.o inv_mpu_trigger.o diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c new file mode 100644 index 00000000000..37ca05b47e4 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -0,0 +1,795 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/sysfs.h> +#include <linux/jiffies.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/spinlock.h> +#include "inv_mpu_iio.h" + +/* + * this is the gyro scale translated from dynamic range plus/minus + * {250, 500, 1000, 2000} to rad/s + */ +static const int gyro_scale_6050[] = {133090, 266181, 532362, 1064724}; + +/* + * this is the accel scale translated from dynamic range plus/minus + * {2, 4, 8, 16} to m/s^2 + */ +static const int accel_scale[] = {598, 1196, 2392, 4785}; + +static const struct inv_mpu6050_reg_map reg_set_6050 = { + .sample_rate_div = INV_MPU6050_REG_SAMPLE_RATE_DIV, + .lpf = INV_MPU6050_REG_CONFIG, + .user_ctrl = INV_MPU6050_REG_USER_CTRL, + .fifo_en = INV_MPU6050_REG_FIFO_EN, + .gyro_config = INV_MPU6050_REG_GYRO_CONFIG, + .accl_config = INV_MPU6050_REG_ACCEL_CONFIG, + .fifo_count_h = INV_MPU6050_REG_FIFO_COUNT_H, + .fifo_r_w = INV_MPU6050_REG_FIFO_R_W, + .raw_gyro = INV_MPU6050_REG_RAW_GYRO, + .raw_accl = INV_MPU6050_REG_RAW_ACCEL, + .temperature = INV_MPU6050_REG_TEMPERATURE, + .int_enable = INV_MPU6050_REG_INT_ENABLE, + .pwr_mgmt_1 = INV_MPU6050_REG_PWR_MGMT_1, + .pwr_mgmt_2 = INV_MPU6050_REG_PWR_MGMT_2, +}; + +static const struct inv_mpu6050_chip_config chip_config_6050 = { + .fsr = INV_MPU6050_FSR_2000DPS, + .lpf = INV_MPU6050_FILTER_20HZ, + .fifo_rate = INV_MPU6050_INIT_FIFO_RATE, + .gyro_fifo_enable = false, + .accl_fifo_enable = false, + .accl_fs = INV_MPU6050_FS_02G, +}; + +static const struct inv_mpu6050_hw hw_info[INV_NUM_PARTS] = { + { + .num_reg = 117, + .name = "MPU6050", + .reg = ®_set_6050, + .config = &chip_config_6050, + }, +}; + +int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 d) +{ + return i2c_smbus_write_i2c_block_data(st->client, reg, 1, &d); +} + +int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask) +{ + u8 d, mgmt_1; + int result; + + /* switch clock needs to be careful. Only when gyro is on, can + clock source be switched to gyro. Otherwise, it must be set to + internal clock */ + if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { + result = i2c_smbus_read_i2c_block_data(st->client, + st->reg->pwr_mgmt_1, 1, &mgmt_1); + if (result != 1) + return result; + + mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK; + } + + if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) { + /* turning off gyro requires switch to internal clock first. + Then turn off gyro engine */ + mgmt_1 |= INV_CLK_INTERNAL; + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, mgmt_1); + if (result) + return result; + } + + result = i2c_smbus_read_i2c_block_data(st->client, + st->reg->pwr_mgmt_2, 1, &d); + if (result != 1) + return result; + if (en) + d &= ~mask; + else + d |= mask; + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_2, d); + if (result) + return result; + + if (en) { + /* Wait for output stablize */ + msleep(INV_MPU6050_TEMP_UP_TIME); + if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) { + /* switch internal clock to PLL */ + mgmt_1 |= INV_CLK_PLL; + result = inv_mpu6050_write_reg(st, + st->reg->pwr_mgmt_1, mgmt_1); + if (result) + return result; + } + } + + return 0; +} + +int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on) +{ + int result; + + if (power_on) + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, 0); + else + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_SLEEP); + if (result) + return result; + + if (power_on) + msleep(INV_MPU6050_REG_UP_TIME); + + return 0; +} + +/** + * inv_mpu6050_init_config() - Initialize hardware, disable FIFO. + * + * Initial configuration: + * FSR: ± 2000DPS + * DLPF: 20Hz + * FIFO rate: 50Hz + * Clock source: Gyro PLL + */ +static int inv_mpu6050_init_config(struct iio_dev *indio_dev) +{ + int result; + u8 d; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + result = inv_mpu6050_set_power_itg(st, true); + if (result) + return result; + d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); + if (result) + return result; + + d = INV_MPU6050_FILTER_20HZ; + result = inv_mpu6050_write_reg(st, st->reg->lpf, d); + if (result) + return result; + + d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1; + result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + if (result) + return result; + + d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); + if (result) + return result; + + memcpy(&st->chip_config, hw_info[st->chip_type].config, + sizeof(struct inv_mpu6050_chip_config)); + result = inv_mpu6050_set_power_itg(st, false); + + return result; +} + +static int inv_mpu6050_sensor_show(struct inv_mpu6050_state *st, int reg, + int axis, int *val) +{ + int ind, result; + __be16 d; + + ind = (axis - IIO_MOD_X) * 2; + result = i2c_smbus_read_i2c_block_data(st->client, reg + ind, 2, + (u8 *)&d); + if (result != 2) + return -EINVAL; + *val = (short)be16_to_cpup(&d); + + return IIO_VAL_INT; +} + +static int inv_mpu6050_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) { + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + { + int ret, result; + + ret = IIO_VAL_INT; + result = 0; + mutex_lock(&indio_dev->mlock); + if (!st->chip_config.enable) { + result = inv_mpu6050_set_power_itg(st, true); + if (result) + goto error_read_raw; + } + /* when enable is on, power is already on */ + switch (chan->type) { + case IIO_ANGL_VEL: + if (!st->chip_config.gyro_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + goto error_read_raw; + } + ret = inv_mpu6050_sensor_show(st, st->reg->raw_gyro, + chan->channel2, val); + if (!st->chip_config.gyro_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + goto error_read_raw; + } + break; + case IIO_ACCEL: + if (!st->chip_config.accl_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + goto error_read_raw; + } + ret = inv_mpu6050_sensor_show(st, st->reg->raw_accl, + chan->channel2, val); + if (!st->chip_config.accl_fifo_enable || + !st->chip_config.enable) { + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + goto error_read_raw; + } + break; + case IIO_TEMP: + /* wait for stablization */ + msleep(INV_MPU6050_SENSOR_UP_TIME); + inv_mpu6050_sensor_show(st, st->reg->temperature, + IIO_MOD_X, val); + break; + default: + ret = -EINVAL; + break; + } +error_read_raw: + if (!st->chip_config.enable) + result |= inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&indio_dev->mlock); + if (result) + return result; + + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + *val = 0; + *val2 = gyro_scale_6050[st->chip_config.fsr]; + + return IIO_VAL_INT_PLUS_NANO; + case IIO_ACCEL: + *val = 0; + *val2 = accel_scale[st->chip_config.accl_fs]; + + return IIO_VAL_INT_PLUS_MICRO; + case IIO_TEMP: + *val = 0; + *val2 = INV_MPU6050_TEMP_SCALE; + + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } + case IIO_CHAN_INFO_OFFSET: + switch (chan->type) { + case IIO_TEMP: + *val = INV_MPU6050_TEMP_OFFSET; + + return IIO_VAL_INT; + default: + return -EINVAL; + } + default: + return -EINVAL; + } +} + +static int inv_mpu6050_write_fsr(struct inv_mpu6050_state *st, int fsr) +{ + int result; + u8 d; + + if (fsr < 0 || fsr > INV_MPU6050_MAX_GYRO_FS_PARAM) + return -EINVAL; + if (fsr == st->chip_config.fsr) + return 0; + + d = (fsr << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, st->reg->gyro_config, d); + if (result) + return result; + st->chip_config.fsr = fsr; + + return 0; +} + +static int inv_mpu6050_write_accel_fs(struct inv_mpu6050_state *st, int fs) +{ + int result; + u8 d; + + if (fs < 0 || fs > INV_MPU6050_MAX_ACCL_FS_PARAM) + return -EINVAL; + if (fs == st->chip_config.accl_fs) + return 0; + + d = (fs << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT); + result = inv_mpu6050_write_reg(st, st->reg->accl_config, d); + if (result) + return result; + st->chip_config.accl_fs = fs; + + return 0; +} + +static int inv_mpu6050_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) { + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int result; + + mutex_lock(&indio_dev->mlock); + /* we should only update scale when the chip is disabled, i.e., + not running */ + if (st->chip_config.enable) { + result = -EBUSY; + goto error_write_raw; + } + result = inv_mpu6050_set_power_itg(st, true); + if (result) + goto error_write_raw; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_ANGL_VEL: + result = inv_mpu6050_write_fsr(st, val); + break; + case IIO_ACCEL: + result = inv_mpu6050_write_accel_fs(st, val); + break; + default: + result = -EINVAL; + break; + } + break; + default: + result = -EINVAL; + break; + } + +error_write_raw: + result |= inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&indio_dev->mlock); + + return result; +} + +/** + * inv_mpu6050_set_lpf() - set low pass filer based on fifo rate. + * + * Based on the Nyquist principle, the sampling rate must + * exceed twice of the bandwidth of the signal, or there + * would be alising. This function basically search for the + * correct low pass parameters based on the fifo rate, e.g, + * sampling frequency. + */ +static int inv_mpu6050_set_lpf(struct inv_mpu6050_state *st, int rate) +{ + const int hz[] = {188, 98, 42, 20, 10, 5}; + const int d[] = {INV_MPU6050_FILTER_188HZ, INV_MPU6050_FILTER_98HZ, + INV_MPU6050_FILTER_42HZ, INV_MPU6050_FILTER_20HZ, + INV_MPU6050_FILTER_10HZ, INV_MPU6050_FILTER_5HZ}; + int i, h, result; + u8 data; + + h = (rate >> 1); + i = 0; + while ((h < hz[i]) && (i < ARRAY_SIZE(d) - 1)) + i++; + data = d[i]; + result = inv_mpu6050_write_reg(st, st->reg->lpf, data); + if (result) + return result; + st->chip_config.lpf = data; + + return 0; +} + +/** + * inv_mpu6050_fifo_rate_store() - Set fifo rate. + */ +static ssize_t inv_mpu6050_fifo_rate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + s32 fifo_rate; + u8 d; + int result; + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + if (kstrtoint(buf, 10, &fifo_rate)) + return -EINVAL; + if (fifo_rate < INV_MPU6050_MIN_FIFO_RATE || + fifo_rate > INV_MPU6050_MAX_FIFO_RATE) + return -EINVAL; + if (fifo_rate == st->chip_config.fifo_rate) + return count; + + mutex_lock(&indio_dev->mlock); + if (st->chip_config.enable) { + result = -EBUSY; + goto fifo_rate_fail; + } + result = inv_mpu6050_set_power_itg(st, true); + if (result) + goto fifo_rate_fail; + + d = INV_MPU6050_ONE_K_HZ / fifo_rate - 1; + result = inv_mpu6050_write_reg(st, st->reg->sample_rate_div, d); + if (result) + goto fifo_rate_fail; + st->chip_config.fifo_rate = fifo_rate; + + result = inv_mpu6050_set_lpf(st, fifo_rate); + if (result) + goto fifo_rate_fail; + +fifo_rate_fail: + result |= inv_mpu6050_set_power_itg(st, false); + mutex_unlock(&indio_dev->mlock); + if (result) + return result; + + return count; +} + +/** + * inv_fifo_rate_show() - Get the current sampling rate. + */ +static ssize_t inv_fifo_rate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); + + return sprintf(buf, "%d\n", st->chip_config.fifo_rate); +} + +/** + * inv_attr_show() - calling this function will show current + * parameters. + */ +static ssize_t inv_attr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct inv_mpu6050_state *st = iio_priv(dev_to_iio_dev(dev)); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + s8 *m; + + switch (this_attr->address) { + /* In MPU6050, the two matrix are the same because gyro and accel + are integrated in one chip */ + case ATTR_GYRO_MATRIX: + case ATTR_ACCL_MATRIX: + m = st->plat_data.orientation; + + return sprintf(buf, "%d, %d, %d; %d, %d, %d; %d, %d, %d\n", + m[0], m[1], m[2], m[3], m[4], m[5], m[6], m[7], m[8]); + default: + return -EINVAL; + } +} + +/** + * inv_mpu6050_validate_trigger() - validate_trigger callback for invensense + * MPU6050 device. + * @indio_dev: The IIO device + * @trig: The new trigger + * + * Returns: 0 if the 'trig' matches the trigger registered by the MPU6050 + * device, -EINVAL otherwise. + */ +static int inv_mpu6050_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + if (st->trig != trig) + return -EINVAL; + + return 0; +} + +#define INV_MPU6050_CHAN(_type, _channel2, _index) \ + { \ + .type = _type, \ + .modified = 1, \ + .channel2 = _channel2, \ + .info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT \ + | IIO_CHAN_INFO_RAW_SEPARATE_BIT, \ + .scan_index = _index, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .shift = 0 , \ + .endianness = IIO_BE, \ + }, \ + } + +static const struct iio_chan_spec inv_mpu_channels[] = { + IIO_CHAN_SOFT_TIMESTAMP(INV_MPU6050_SCAN_TIMESTAMP), + /* + * Note that temperature should only be via polled reading only, + * not the final scan elements output. + */ + { + .type = IIO_TEMP, + .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT + | IIO_CHAN_INFO_OFFSET_SEPARATE_BIT + | IIO_CHAN_INFO_SCALE_SEPARATE_BIT, + .scan_index = -1, + }, + INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_MPU6050_SCAN_GYRO_X), + INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_MPU6050_SCAN_GYRO_Y), + INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_MPU6050_SCAN_GYRO_Z), + + INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_MPU6050_SCAN_ACCL_X), + INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_MPU6050_SCAN_ACCL_Y), + INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z), +}; + +/* constant IIO attribute */ +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("10 20 50 100 200 500"); +static IIO_DEV_ATTR_SAMP_FREQ(S_IRUGO | S_IWUSR, inv_fifo_rate_show, + inv_mpu6050_fifo_rate_store); +static IIO_DEVICE_ATTR(in_gyro_matrix, S_IRUGO, inv_attr_show, NULL, + ATTR_GYRO_MATRIX); +static IIO_DEVICE_ATTR(in_accel_matrix, S_IRUGO, inv_attr_show, NULL, + ATTR_ACCL_MATRIX); + +static struct attribute *inv_attributes[] = { + &iio_dev_attr_in_gyro_matrix.dev_attr.attr, + &iio_dev_attr_in_accel_matrix.dev_attr.attr, + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group inv_attribute_group = { + .attrs = inv_attributes +}; + +static const struct iio_info mpu_info = { + .driver_module = THIS_MODULE, + .read_raw = &inv_mpu6050_read_raw, + .write_raw = &inv_mpu6050_write_raw, + .attrs = &inv_attribute_group, + .validate_trigger = inv_mpu6050_validate_trigger, +}; + +/** + * inv_check_and_setup_chip() - check and setup chip. + */ +static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, + const struct i2c_device_id *id) +{ + int result; + + st->chip_type = INV_MPU6050; + st->hw = &hw_info[st->chip_type]; + st->reg = hw_info[st->chip_type].reg; + + /* reset to make sure previous state are not there */ + result = inv_mpu6050_write_reg(st, st->reg->pwr_mgmt_1, + INV_MPU6050_BIT_H_RESET); + if (result) + return result; + msleep(INV_MPU6050_POWER_UP_TIME); + /* toggle power state. After reset, the sleep bit could be on + or off depending on the OTP settings. Toggling power would + make it in a definite state as well as making the hardware + state align with the software state */ + result = inv_mpu6050_set_power_itg(st, false); + if (result) + return result; + result = inv_mpu6050_set_power_itg(st, true); + if (result) + return result; + + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + return result; + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + return result; + + return 0; +} + +/** + * inv_mpu_probe() - probe function. + * @client: i2c client. + * @id: i2c device id. + * + * Returns 0 on success, a negative error code otherwise. + */ +static int inv_mpu_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct inv_mpu6050_state *st; + struct iio_dev *indio_dev; + int result; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK | + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + result = -ENOSYS; + goto out_no_free; + } + indio_dev = iio_device_alloc(sizeof(*st)); + if (indio_dev == NULL) { + result = -ENOMEM; + goto out_no_free; + } + st = iio_priv(indio_dev); + st->client = client; + st->plat_data = *(struct inv_mpu6050_platform_data + *)dev_get_platdata(&client->dev); + /* power is turned on inside check chip type*/ + result = inv_check_and_setup_chip(st, id); + if (result) + goto out_free; + + result = inv_mpu6050_init_config(indio_dev); + if (result) { + dev_err(&client->dev, + "Could not initialize device.\n"); + goto out_free; + } + + i2c_set_clientdata(client, indio_dev); + indio_dev->dev.parent = &client->dev; + indio_dev->name = id->name; + indio_dev->channels = inv_mpu_channels; + indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels); + + indio_dev->info = &mpu_info; + indio_dev->modes = INDIO_BUFFER_TRIGGERED; + + result = iio_triggered_buffer_setup(indio_dev, + inv_mpu6050_irq_handler, + inv_mpu6050_read_fifo, + NULL); + if (result) { + dev_err(&st->client->dev, "configure buffer fail %d\n", + result); + goto out_free; + } + result = inv_mpu6050_probe_trigger(indio_dev); + if (result) { + dev_err(&st->client->dev, "trigger probe fail %d\n", result); + goto out_unreg_ring; + } + + INIT_KFIFO(st->timestamps); + spin_lock_init(&st->time_stamp_lock); + result = iio_device_register(indio_dev); + if (result) { + dev_err(&st->client->dev, "IIO register fail %d\n", result); + goto out_remove_trigger; + } + + return 0; + +out_remove_trigger: + inv_mpu6050_remove_trigger(st); +out_unreg_ring: + iio_triggered_buffer_cleanup(indio_dev); +out_free: + iio_device_free(indio_dev); +out_no_free: + + return result; +} + +static int inv_mpu_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + inv_mpu6050_remove_trigger(st); + iio_triggered_buffer_cleanup(indio_dev); + iio_device_free(indio_dev); + + return 0; +} +#ifdef CONFIG_PM_SLEEP + +static int inv_mpu_resume(struct device *dev) +{ + return inv_mpu6050_set_power_itg( + iio_priv(i2c_get_clientdata(to_i2c_client(dev))), true); +} + +static int inv_mpu_suspend(struct device *dev) +{ + return inv_mpu6050_set_power_itg( + iio_priv(i2c_get_clientdata(to_i2c_client(dev))), false); +} +static SIMPLE_DEV_PM_OPS(inv_mpu_pmops, inv_mpu_suspend, inv_mpu_resume); + +#define INV_MPU6050_PMOPS (&inv_mpu_pmops) +#else +#define INV_MPU6050_PMOPS NULL +#endif /* CONFIG_PM_SLEEP */ + +/* + * device id table is used to identify what device can be + * supported by this driver + */ +static const struct i2c_device_id inv_mpu_id[] = { + {"mpu6050", INV_MPU6050}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, inv_mpu_id); + +static struct i2c_driver inv_mpu_driver = { + .probe = inv_mpu_probe, + .remove = inv_mpu_remove, + .id_table = inv_mpu_id, + .driver = { + .owner = THIS_MODULE, + .name = "inv-mpu6050", + .pm = INV_MPU6050_PMOPS, + }, +}; + +module_i2c_driver(inv_mpu_driver); + +MODULE_AUTHOR("Invensense Corporation"); +MODULE_DESCRIPTION("Invensense device MPU6050 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h new file mode 100644 index 00000000000..f38395529a4 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -0,0 +1,246 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ +#include <linux/i2c.h> +#include <linux/kfifo.h> +#include <linux/spinlock.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/platform_data/invensense_mpu6050.h> + +/** + * struct inv_mpu6050_reg_map - Notable registers. + * @sample_rate_div: Divider applied to gyro output rate. + * @lpf: Configures internal low pass filter. + * @user_ctrl: Enables/resets the FIFO. + * @fifo_en: Determines which data will appear in FIFO. + * @gyro_config: gyro config register. + * @accl_config: accel config register + * @fifo_count_h: Upper byte of FIFO count. + * @fifo_r_w: FIFO register. + * @raw_gyro: Address of first gyro register. + * @raw_accl: Address of first accel register. + * @temperature: temperature register + * @int_enable: Interrupt enable register. + * @pwr_mgmt_1: Controls chip's power state and clock source. + * @pwr_mgmt_2: Controls power state of individual sensors. + */ +struct inv_mpu6050_reg_map { + u8 sample_rate_div; + u8 lpf; + u8 user_ctrl; + u8 fifo_en; + u8 gyro_config; + u8 accl_config; + u8 fifo_count_h; + u8 fifo_r_w; + u8 raw_gyro; + u8 raw_accl; + u8 temperature; + u8 int_enable; + u8 pwr_mgmt_1; + u8 pwr_mgmt_2; +}; + +/*device enum */ +enum inv_devices { + INV_MPU6050, + INV_NUM_PARTS +}; + +/** + * struct inv_mpu6050_chip_config - Cached chip configuration data. + * @fsr: Full scale range. + * @lpf: Digital low pass filter frequency. + * @accl_fs: accel full scale range. + * @enable: master enable state. + * @accl_fifo_enable: enable accel data output + * @gyro_fifo_enable: enable gyro data output + * @fifo_rate: FIFO update rate. + */ +struct inv_mpu6050_chip_config { + unsigned int fsr:2; + unsigned int lpf:3; + unsigned int accl_fs:2; + unsigned int enable:1; + unsigned int accl_fifo_enable:1; + unsigned int gyro_fifo_enable:1; + u16 fifo_rate; +}; + +/** + * struct inv_mpu6050_hw - Other important hardware information. + * @num_reg: Number of registers on device. + * @name: name of the chip. + * @reg: register map of the chip. + * @config: configuration of the chip. + */ +struct inv_mpu6050_hw { + u8 num_reg; + u8 *name; + const struct inv_mpu6050_reg_map *reg; + const struct inv_mpu6050_chip_config *config; +}; + +/* + * struct inv_mpu6050_state - Driver state variables. + * @TIMESTAMP_FIFO_SIZE: fifo size for timestamp. + * @trig: IIO trigger. + * @chip_config: Cached attribute information. + * @reg: Map of important registers. + * @hw: Other hardware-specific information. + * @chip_type: chip type. + * @time_stamp_lock: spin lock to time stamp. + * @client: i2c client handle. + * @plat_data: platform data. + * @timestamps: kfifo queue to store time stamp. + */ +struct inv_mpu6050_state { +#define TIMESTAMP_FIFO_SIZE 16 + struct iio_trigger *trig; + struct inv_mpu6050_chip_config chip_config; + const struct inv_mpu6050_reg_map *reg; + const struct inv_mpu6050_hw *hw; + enum inv_devices chip_type; + spinlock_t time_stamp_lock; + struct i2c_client *client; + struct inv_mpu6050_platform_data plat_data; + DECLARE_KFIFO(timestamps, long long, TIMESTAMP_FIFO_SIZE); +}; + +/*register and associated bit definition*/ +#define INV_MPU6050_REG_SAMPLE_RATE_DIV 0x19 +#define INV_MPU6050_REG_CONFIG 0x1A +#define INV_MPU6050_REG_GYRO_CONFIG 0x1B +#define INV_MPU6050_REG_ACCEL_CONFIG 0x1C + +#define INV_MPU6050_REG_FIFO_EN 0x23 +#define INV_MPU6050_BIT_ACCEL_OUT 0x08 +#define INV_MPU6050_BITS_GYRO_OUT 0x70 + +#define INV_MPU6050_REG_INT_ENABLE 0x38 +#define INV_MPU6050_BIT_DATA_RDY_EN 0x01 +#define INV_MPU6050_BIT_DMP_INT_EN 0x02 + +#define INV_MPU6050_REG_RAW_ACCEL 0x3B +#define INV_MPU6050_REG_TEMPERATURE 0x41 +#define INV_MPU6050_REG_RAW_GYRO 0x43 + +#define INV_MPU6050_REG_USER_CTRL 0x6A +#define INV_MPU6050_BIT_FIFO_RST 0x04 +#define INV_MPU6050_BIT_DMP_RST 0x08 +#define INV_MPU6050_BIT_I2C_MST_EN 0x20 +#define INV_MPU6050_BIT_FIFO_EN 0x40 +#define INV_MPU6050_BIT_DMP_EN 0x80 + +#define INV_MPU6050_REG_PWR_MGMT_1 0x6B +#define INV_MPU6050_BIT_H_RESET 0x80 +#define INV_MPU6050_BIT_SLEEP 0x40 +#define INV_MPU6050_BIT_CLK_MASK 0x7 + +#define INV_MPU6050_REG_PWR_MGMT_2 0x6C +#define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38 +#define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07 + +#define INV_MPU6050_REG_FIFO_COUNT_H 0x72 +#define INV_MPU6050_REG_FIFO_R_W 0x74 + +#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6 +#define INV_MPU6050_FIFO_COUNT_BYTE 2 +#define INV_MPU6050_FIFO_THRESHOLD 500 +#define INV_MPU6050_POWER_UP_TIME 100 +#define INV_MPU6050_TEMP_UP_TIME 100 +#define INV_MPU6050_SENSOR_UP_TIME 30 +#define INV_MPU6050_REG_UP_TIME 5 + +#define INV_MPU6050_TEMP_OFFSET 12421 +#define INV_MPU6050_TEMP_SCALE 2941 +#define INV_MPU6050_MAX_GYRO_FS_PARAM 3 +#define INV_MPU6050_MAX_ACCL_FS_PARAM 3 +#define INV_MPU6050_THREE_AXIS 3 +#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3 +#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3 + +/* 6 + 6 round up and plus 8 */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 24 + +/* init parameters */ +#define INV_MPU6050_INIT_FIFO_RATE 50 +#define INV_MPU6050_TIME_STAMP_TOR 5 +#define INV_MPU6050_MAX_FIFO_RATE 1000 +#define INV_MPU6050_MIN_FIFO_RATE 4 +#define INV_MPU6050_ONE_K_HZ 1000 + +/* scan element definition */ +enum inv_mpu6050_scan { + INV_MPU6050_SCAN_ACCL_X, + INV_MPU6050_SCAN_ACCL_Y, + INV_MPU6050_SCAN_ACCL_Z, + INV_MPU6050_SCAN_GYRO_X, + INV_MPU6050_SCAN_GYRO_Y, + INV_MPU6050_SCAN_GYRO_Z, + INV_MPU6050_SCAN_TIMESTAMP, +}; + +enum inv_mpu6050_filter_e { + INV_MPU6050_FILTER_256HZ_NOLPF2 = 0, + INV_MPU6050_FILTER_188HZ, + INV_MPU6050_FILTER_98HZ, + INV_MPU6050_FILTER_42HZ, + INV_MPU6050_FILTER_20HZ, + INV_MPU6050_FILTER_10HZ, + INV_MPU6050_FILTER_5HZ, + INV_MPU6050_FILTER_2100HZ_NOLPF, + NUM_MPU6050_FILTER +}; + +/* IIO attribute address */ +enum INV_MPU6050_IIO_ATTR_ADDR { + ATTR_GYRO_MATRIX, + ATTR_ACCL_MATRIX, +}; + +enum inv_mpu6050_accl_fs_e { + INV_MPU6050_FS_02G = 0, + INV_MPU6050_FS_04G, + INV_MPU6050_FS_08G, + INV_MPU6050_FS_16G, + NUM_ACCL_FSR +}; + +enum inv_mpu6050_fsr_e { + INV_MPU6050_FSR_250DPS = 0, + INV_MPU6050_FSR_500DPS, + INV_MPU6050_FSR_1000DPS, + INV_MPU6050_FSR_2000DPS, + NUM_MPU6050_FSR +}; + +enum inv_mpu6050_clock_sel_e { + INV_CLK_INTERNAL = 0, + INV_CLK_PLL, + NUM_CLK +}; + +irqreturn_t inv_mpu6050_irq_handler(int irq, void *p); +irqreturn_t inv_mpu6050_read_fifo(int irq, void *p); +int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev); +void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st); +int inv_reset_fifo(struct iio_dev *indio_dev); +int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask); +int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); +int inv_mpu6050_set_power_itg(struct inv_mpu6050_state *st, bool power_on); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c new file mode 100644 index 00000000000..331781ffbb1 --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -0,0 +1,196 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/sysfs.h> +#include <linux/jiffies.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/poll.h> +#include "inv_mpu_iio.h" + +int inv_reset_fifo(struct iio_dev *indio_dev) +{ + int result; + u8 d; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + /* disable interrupt */ + result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + if (result) { + dev_err(&st->client->dev, "int_enable failed %d\n", result); + return result; + } + /* disable the sensor output to FIFO */ + result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + if (result) + goto reset_fifo_fail; + /* disable fifo reading */ + result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + if (result) + goto reset_fifo_fail; + + /* reset FIFO*/ + result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, + INV_MPU6050_BIT_FIFO_RST); + if (result) + goto reset_fifo_fail; + /* enable interrupt */ + if (st->chip_config.accl_fifo_enable || + st->chip_config.gyro_fifo_enable) { + result = inv_mpu6050_write_reg(st, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); + if (result) + return result; + } + /* enable FIFO reading and I2C master interface*/ + result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, + INV_MPU6050_BIT_FIFO_EN); + if (result) + goto reset_fifo_fail; + /* enable sensor output to FIFO */ + d = 0; + if (st->chip_config.gyro_fifo_enable) + d |= INV_MPU6050_BITS_GYRO_OUT; + if (st->chip_config.accl_fifo_enable) + d |= INV_MPU6050_BIT_ACCEL_OUT; + result = inv_mpu6050_write_reg(st, st->reg->fifo_en, d); + if (result) + goto reset_fifo_fail; + + return 0; + +reset_fifo_fail: + dev_err(&st->client->dev, "reset fifo failed %d\n", result); + result = inv_mpu6050_write_reg(st, st->reg->int_enable, + INV_MPU6050_BIT_DATA_RDY_EN); + + return result; +} + +static void inv_clear_kfifo(struct inv_mpu6050_state *st) +{ + unsigned long flags; + + /* take the spin lock sem to avoid interrupt kick in */ + spin_lock_irqsave(&st->time_stamp_lock, flags); + kfifo_reset(&st->timestamps); + spin_unlock_irqrestore(&st->time_stamp_lock, flags); +} + +/** + * inv_mpu6050_irq_handler() - Cache a timestamp at each data ready interrupt. + */ +irqreturn_t inv_mpu6050_irq_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + s64 timestamp; + + timestamp = iio_get_time_ns(); + spin_lock(&st->time_stamp_lock); + kfifo_in(&st->timestamps, ×tamp, 1); + spin_unlock(&st->time_stamp_lock); + + return IRQ_WAKE_THREAD; +} + +/** + * inv_mpu6050_read_fifo() - Transfer data from hardware FIFO to KFIFO. + */ +irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + size_t bytes_per_datum; + int result; + u8 data[INV_MPU6050_OUTPUT_DATA_SIZE]; + u16 fifo_count; + s64 timestamp; + u64 *tmp; + + mutex_lock(&indio_dev->mlock); + if (!(st->chip_config.accl_fifo_enable | + st->chip_config.gyro_fifo_enable)) + goto end_session; + bytes_per_datum = 0; + if (st->chip_config.accl_fifo_enable) + bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR; + + if (st->chip_config.gyro_fifo_enable) + bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR; + + /* + * read fifo_count register to know how many bytes inside FIFO + * right now + */ + result = i2c_smbus_read_i2c_block_data(st->client, + st->reg->fifo_count_h, + INV_MPU6050_FIFO_COUNT_BYTE, data); + if (result != INV_MPU6050_FIFO_COUNT_BYTE) + goto end_session; + fifo_count = be16_to_cpup((__be16 *)(&data[0])); + if (fifo_count < bytes_per_datum) + goto end_session; + /* fifo count can't be odd number, if it is odd, reset fifo*/ + if (fifo_count & 1) + goto flush_fifo; + if (fifo_count > INV_MPU6050_FIFO_THRESHOLD) + goto flush_fifo; + /* Timestamp mismatch. */ + if (kfifo_len(&st->timestamps) > + fifo_count / bytes_per_datum + INV_MPU6050_TIME_STAMP_TOR) + goto flush_fifo; + while (fifo_count >= bytes_per_datum) { + result = i2c_smbus_read_i2c_block_data(st->client, + st->reg->fifo_r_w, + bytes_per_datum, data); + if (result != bytes_per_datum) + goto flush_fifo; + + result = kfifo_out(&st->timestamps, ×tamp, 1); + /* when there is no timestamp, put timestamp as 0 */ + if (0 == result) + timestamp = 0; + + tmp = (u64 *)data; + tmp[DIV_ROUND_UP(bytes_per_datum, 8)] = timestamp; + result = iio_push_to_buffers(indio_dev, data); + if (result) + goto flush_fifo; + fifo_count -= bytes_per_datum; + } + +end_session: + mutex_unlock(&indio_dev->mlock); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; + +flush_fifo: + /* Flush HW and SW FIFOs. */ + inv_reset_fifo(indio_dev); + inv_clear_kfifo(st); + mutex_unlock(&indio_dev->mlock); + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c new file mode 100644 index 00000000000..e1d0869e0ad --- /dev/null +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c @@ -0,0 +1,155 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#include "inv_mpu_iio.h" + +static void inv_scan_query(struct iio_dev *indio_dev) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + st->chip_config.gyro_fifo_enable = + test_bit(INV_MPU6050_SCAN_GYRO_X, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_GYRO_Z, + indio_dev->active_scan_mask); + + st->chip_config.accl_fifo_enable = + test_bit(INV_MPU6050_SCAN_ACCL_X, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Y, + indio_dev->active_scan_mask) || + test_bit(INV_MPU6050_SCAN_ACCL_Z, + indio_dev->active_scan_mask); +} + +/** + * inv_mpu6050_set_enable() - enable chip functions. + * @indio_dev: Device driver instance. + * @enable: enable/disable + */ +static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable) +{ + struct inv_mpu6050_state *st = iio_priv(indio_dev); + int result; + + if (enable) { + result = inv_mpu6050_set_power_itg(st, true); + if (result) + return result; + inv_scan_query(indio_dev); + if (st->chip_config.gyro_fifo_enable) { + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + return result; + } + if (st->chip_config.accl_fifo_enable) { + result = inv_mpu6050_switch_engine(st, true, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + return result; + } + result = inv_reset_fifo(indio_dev); + if (result) + return result; + } else { + result = inv_mpu6050_write_reg(st, st->reg->fifo_en, 0); + if (result) + return result; + + result = inv_mpu6050_write_reg(st, st->reg->int_enable, 0); + if (result) + return result; + + result = inv_mpu6050_write_reg(st, st->reg->user_ctrl, 0); + if (result) + return result; + + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_GYRO_STBY); + if (result) + return result; + + result = inv_mpu6050_switch_engine(st, false, + INV_MPU6050_BIT_PWR_ACCL_STBY); + if (result) + return result; + result = inv_mpu6050_set_power_itg(st, false); + if (result) + return result; + } + st->chip_config.enable = enable; + + return 0; +} + +/** + * inv_mpu_data_rdy_trigger_set_state() - set data ready interrupt state + * @trig: Trigger instance + * @state: Desired trigger state + */ +static int inv_mpu_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + return inv_mpu6050_set_enable(trig->private_data, state); +} + +static const struct iio_trigger_ops inv_mpu_trigger_ops = { + .owner = THIS_MODULE, + .set_trigger_state = &inv_mpu_data_rdy_trigger_set_state, +}; + +int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev) +{ + int ret; + struct inv_mpu6050_state *st = iio_priv(indio_dev); + + st->trig = iio_trigger_alloc("%s-dev%d", + indio_dev->name, + indio_dev->id); + if (st->trig == NULL) { + ret = -ENOMEM; + goto error_ret; + } + ret = request_irq(st->client->irq, &iio_trigger_generic_data_rdy_poll, + IRQF_TRIGGER_RISING, + "inv_mpu", + st->trig); + if (ret) + goto error_free_trig; + st->trig->dev.parent = &st->client->dev; + st->trig->private_data = indio_dev; + st->trig->ops = &inv_mpu_trigger_ops; + ret = iio_trigger_register(st->trig); + if (ret) + goto error_free_irq; + indio_dev->trig = st->trig; + + return 0; + +error_free_irq: + free_irq(st->client->irq, st->trig); +error_free_trig: + iio_trigger_free(st->trig); +error_ret: + return ret; +} + +void inv_mpu6050_remove_trigger(struct inv_mpu6050_state *st) +{ + iio_trigger_unregister(st->trig); + free_irq(st->client->irq, st->trig); + iio_trigger_free(st->trig); +} diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h new file mode 100644 index 00000000000..ad3aa7b95f3 --- /dev/null +++ b/include/linux/platform_data/invensense_mpu6050.h @@ -0,0 +1,31 @@ +/* +* Copyright (C) 2012 Invensense, Inc. +* +* This software is licensed under the terms of the GNU General Public +* License version 2, as published by the Free Software Foundation, and +* may be copied, distributed, and modified under those terms. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __INV_MPU6050_PLATFORM_H_ +#define __INV_MPU6050_PLATFORM_H_ + +/** + * struct inv_mpu6050_platform_data - Platform data for the mpu driver + * @orientation: Orientation matrix of the chip + * + * Contains platform specific information on how to configure the MPU6050 to + * work on this platform. The orientation matricies are 3x3 rotation matricies + * that are applied to the data to rotate from the mounting orientation to the + * platform orientation. The values must be one of 0, 1, or -1 and each row and + * column should have exactly 1 non-zero value. + */ +struct inv_mpu6050_platform_data { + __s8 orientation[9]; +}; + +#endif |