summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--lib/Kconfig.debug13
-rw-r--r--lib/Makefile1
-rw-r--r--lib/test_firmware.c117
-rw-r--r--tools/testing/selftests/Makefile1
-rw-r--r--tools/testing/selftests/firmware/Makefile27
-rw-r--r--tools/testing/selftests/firmware/fw_filesystem.sh62
-rw-r--r--tools/testing/selftests/firmware/fw_userhelper.sh89
7 files changed, 310 insertions, 0 deletions
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 7a638aa3545..213cd9f7e95 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1649,6 +1649,19 @@ config TEST_BPF
If unsure, say N.
+config TEST_FIRMWARE
+ tristate "Test firmware loading via userspace interface"
+ default n
+ depends on FW_LOADER
+ help
+ This builds the "test_firmware" module that creates a userspace
+ interface for testing firmware loading. This can be used to
+ control the triggering of firmware loading without needing an
+ actual firmware-using device. The contents can be rechecked by
+ userspace.
+
+ If unsure, say N.
+
source "samples/Kconfig"
source "lib/Kconfig.kgdb"
diff --git a/lib/Makefile b/lib/Makefile
index ba967a19edb..230b4b1456d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
obj-$(CONFIG_TEST_MODULE) += test_module.o
obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
obj-$(CONFIG_TEST_BPF) += test_bpf.o
+obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
diff --git a/lib/test_firmware.c b/lib/test_firmware.c
new file mode 100644
index 00000000000..86374c1c49a
--- /dev/null
+++ b/lib/test_firmware.c
@@ -0,0 +1,117 @@
+/*
+ * This module provides an interface to trigger and test firmware loading.
+ *
+ * It is designed to be used for basic evaluation of the firmware loading
+ * subsystem (for example when validating firmware verification). It lacks
+ * any extra dependencies, and will not normally be loaded by the system
+ * unless explicitly requested by name.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/firmware.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+static DEFINE_MUTEX(test_fw_mutex);
+static const struct firmware *test_firmware;
+
+static ssize_t test_fw_misc_read(struct file *f, char __user *buf,
+ size_t size, loff_t *offset)
+{
+ ssize_t rc = 0;
+
+ mutex_lock(&test_fw_mutex);
+ if (test_firmware)
+ rc = simple_read_from_buffer(buf, size, offset,
+ test_firmware->data,
+ test_firmware->size);
+ mutex_unlock(&test_fw_mutex);
+ return rc;
+}
+
+static const struct file_operations test_fw_fops = {
+ .owner = THIS_MODULE,
+ .read = test_fw_misc_read,
+};
+
+static struct miscdevice test_fw_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "test_firmware",
+ .fops = &test_fw_fops,
+};
+
+static ssize_t trigger_request_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rc;
+ char *name;
+
+ name = kzalloc(count + 1, GFP_KERNEL);
+ if (!name)
+ return -ENOSPC;
+ memcpy(name, buf, count);
+
+ pr_info("loading '%s'\n", name);
+
+ mutex_lock(&test_fw_mutex);
+ release_firmware(test_firmware);
+ test_firmware = NULL;
+ rc = request_firmware(&test_firmware, name, dev);
+ if (rc)
+ pr_info("load of '%s' failed: %d\n", name, rc);
+ pr_info("loaded: %zu\n", test_firmware ? test_firmware->size : 0);
+ mutex_unlock(&test_fw_mutex);
+
+ kfree(name);
+
+ return count;
+}
+static DEVICE_ATTR_WO(trigger_request);
+
+static int __init test_firmware_init(void)
+{
+ int rc;
+
+ rc = misc_register(&test_fw_misc_device);
+ if (rc) {
+ pr_err("could not register misc device: %d\n", rc);
+ return rc;
+ }
+ rc = device_create_file(test_fw_misc_device.this_device,
+ &dev_attr_trigger_request);
+ if (rc) {
+ pr_err("could not create sysfs interface: %d\n", rc);
+ goto dereg;
+ }
+
+ pr_warn("interface ready\n");
+
+ return 0;
+dereg:
+ misc_deregister(&test_fw_misc_device);
+ return rc;
+}
+
+module_init(test_firmware_init);
+
+static void __exit test_firmware_exit(void)
+{
+ release_firmware(test_firmware);
+ device_remove_file(test_fw_misc_device.this_device,
+ &dev_attr_trigger_request);
+ misc_deregister(&test_fw_misc_device);
+ pr_warn("removed interface\n");
+}
+
+module_exit(test_firmware_exit);
+
+MODULE_AUTHOR("Kees Cook <keescook@chromium.org>");
+MODULE_LICENSE("GPL");
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index e66e710cc59..5c2bf8ec18f 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -11,6 +11,7 @@ TARGETS += vm
TARGETS += powerpc
TARGETS += user
TARGETS += sysctl
+TARGETS += firmware
all:
for TARGET in $(TARGETS); do \
diff --git a/tools/testing/selftests/firmware/Makefile b/tools/testing/selftests/firmware/Makefile
new file mode 100644
index 00000000000..e23cce0bbc3
--- /dev/null
+++ b/tools/testing/selftests/firmware/Makefile
@@ -0,0 +1,27 @@
+# Makefile for firmware loading selftests
+
+# No binaries, but make sure arg-less "make" doesn't trigger "run_tests"
+all:
+
+fw_filesystem:
+ @if /bin/sh ./fw_filesystem.sh ; then \
+ echo "fw_filesystem: ok"; \
+ else \
+ echo "fw_filesystem: [FAIL]"; \
+ exit 1; \
+ fi
+
+fw_userhelper:
+ @if /bin/sh ./fw_userhelper.sh ; then \
+ echo "fw_userhelper: ok"; \
+ else \
+ echo "fw_userhelper: [FAIL]"; \
+ exit 1; \
+ fi
+
+run_tests: all fw_filesystem fw_userhelper
+
+# Nothing to clean up.
+clean:
+
+.PHONY: all clean run_tests fw_filesystem fw_userhelper
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
new file mode 100644
index 00000000000..3fc6c10c247
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# This validates that the kernel will load firmware out of its list of
+# firmware locations on disk. Since the user helper does similar work,
+# we reset the custom load directory to a location the user helper doesn't
+# know so we can be sure we're not accidentally testing the user helper.
+set -e
+
+modprobe test_firmware
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+OLD_FWPATH=$(cat /sys/module/firmware_class/parameters/path)
+
+FWPATH=$(mktemp -d)
+FW="$FWPATH/test-firmware.bin"
+
+test_finish()
+{
+ echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+ echo -n "$OLD_PATH" >/sys/module/firmware_class/parameters/path
+ rm -f "$FW"
+ rmdir "$FWPATH"
+}
+
+trap "test_finish" EXIT
+
+# Turn down the timeout so failures don't take so long.
+echo 1 >/sys/class/firmware/timeout
+# Set the kernel search path.
+echo -n "$FWPATH" >/sys/module/firmware_class/parameters/path
+
+# This is an unlikely real-world firmware content. :)
+echo "ABCD0123" >"$FW"
+
+NAME=$(basename "$FW")
+
+# Request a firmware that doesn't exist, it should fail.
+echo -n "nope-$NAME" >"$DIR"/trigger_request
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ echo "$0: timeout works"
+fi
+
+# This should succeed via kernel load or will fail after 1 second after
+# being handed over to the user helper, which won't find the fw either.
+if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
+ echo "$0: could not trigger request" >&2
+ exit 1
+fi
+
+# Verify the contents are what we expect.
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not loaded" >&2
+ exit 1
+else
+ echo "$0: filesystem loading works"
+fi
+
+exit 0
diff --git a/tools/testing/selftests/firmware/fw_userhelper.sh b/tools/testing/selftests/firmware/fw_userhelper.sh
new file mode 100644
index 00000000000..6efbade1213
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_userhelper.sh
@@ -0,0 +1,89 @@
+#!/bin/sh
+# This validates that the kernel will fall back to using the user helper
+# to load firmware it can't find on disk itself. We must request a firmware
+# that the kernel won't find, and any installed helper (e.g. udev) also
+# won't find so that we can do the load ourself manually.
+set -e
+
+modprobe test_firmware
+
+DIR=/sys/devices/virtual/misc/test_firmware
+
+OLD_TIMEOUT=$(cat /sys/class/firmware/timeout)
+
+FWPATH=$(mktemp -d)
+FW="$FWPATH/test-firmware.bin"
+
+test_finish()
+{
+ echo "$OLD_TIMEOUT" >/sys/class/firmware/timeout
+ rm -f "$FW"
+ rmdir "$FWPATH"
+}
+
+load_fw()
+{
+ local name="$1"
+ local file="$2"
+
+ # This will block until our load (below) has finished.
+ echo -n "$name" >"$DIR"/trigger_request &
+
+ # Give kernel a chance to react.
+ local timeout=10
+ while [ ! -e "$DIR"/"$name"/loading ]; do
+ sleep 0.1
+ timeout=$(( $timeout - 1 ))
+ if [ "$timeout" -eq 0 ]; then
+ echo "$0: firmware interface never appeared" >&2
+ exit 1
+ fi
+ done
+
+ echo 1 >"$DIR"/"$name"/loading
+ cat "$file" >"$DIR"/"$name"/data
+ echo 0 >"$DIR"/"$name"/loading
+
+ # Wait for request to finish.
+ wait
+}
+
+trap "test_finish" EXIT
+
+# This is an unlikely real-world firmware content. :)
+echo "ABCD0123" >"$FW"
+NAME=$(basename "$FW")
+
+# Test failure when doing nothing (timeout works).
+echo 1 >/sys/class/firmware/timeout
+echo -n "$NAME" >"$DIR"/trigger_request
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ echo "$0: timeout works"
+fi
+
+# Put timeout high enough for us to do work but not so long that failures
+# slow down this test too much.
+echo 4 >/sys/class/firmware/timeout
+
+# Load this script instead of the desired firmware.
+load_fw "$NAME" "$0"
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ echo "$0: firmware comparison works"
+fi
+
+# Do a proper load, which should work correctly.
+load_fw "$NAME" "$FW"
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not loaded" >&2
+ exit 1
+else
+ echo "$0: user helper firmware loading works"
+fi
+
+exit 0
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 02:19:03 +0000