diff options
42 files changed, 1662 insertions, 162 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d80930d58da..3bc48b0bd3a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2834,6 +2834,12 @@ and is between 256 and 4096 characters. It is defined in the file default x2apic cluster mode on platforms supporting x2apic. + x86_mrst_timer= [X86-32,APBT] + Choose timer option for x86 Moorestown MID platform. + Two valid options are apbt timer only and lapic timer + plus one apbt timer for broadcast timer. + x86_mrst_timer=apbt_only | lapic_and_apbt + xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. xd_geo= See header of drivers/block/xd.c. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f15f37bfbd6..e9844037152 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -393,8 +393,12 @@ config X86_ELAN config X86_MRST bool "Moorestown MID platform" + depends on PCI + depends on PCI_GOANY depends on X86_32 depends on X86_EXTENDED_PLATFORM + depends on X86_IO_APIC + select APB_TIMER ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: @@ -429,6 +433,7 @@ config X86_32_NON_STANDARD config X86_NUMAQ bool "NUMAQ (IBM/Sequent)" depends on X86_32_NON_STANDARD + depends on PCI select NUMA select X86_MPPARSE ---help--- @@ -629,6 +634,16 @@ config HPET_EMULATE_RTC def_bool y depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) +config APB_TIMER + def_bool y if MRST + prompt "Langwell APB Timer Support" if X86_MRST + help + APB timer is the replacement for 8254, HPET on X86 MID platforms. + The APBT provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. APB timers are always running regardless of CPU + C states, they are used as per CPU clockevent device when possible. + # Mark as embedded because too many people got it wrong. # The code disables itself when not needed. config DMI diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h new file mode 100644 index 00000000000..c74a2eebe57 --- /dev/null +++ b/arch/x86/include/asm/apb_timer.h @@ -0,0 +1,70 @@ +/* + * apb_timer.h: Driver for Langwell APB timer based on Synopsis DesignWare + * + * (C) Copyright 2009 Intel Corporation + * Author: Jacob Pan (jacob.jun.pan@intel.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + */ + +#ifndef ASM_X86_APBT_H +#define ASM_X86_APBT_H +#include <linux/sfi.h> + +#ifdef CONFIG_APB_TIMER + +/* Langwell DW APB timer registers */ +#define APBTMR_N_LOAD_COUNT 0x00 +#define APBTMR_N_CURRENT_VALUE 0x04 +#define APBTMR_N_CONTROL 0x08 +#define APBTMR_N_EOI 0x0c +#define APBTMR_N_INT_STATUS 0x10 + +#define APBTMRS_INT_STATUS 0xa0 +#define APBTMRS_EOI 0xa4 +#define APBTMRS_RAW_INT_STATUS 0xa8 +#define APBTMRS_COMP_VERSION 0xac +#define APBTMRS_REG_SIZE 0x14 + +/* register bits */ +#define APBTMR_CONTROL_ENABLE (1<<0) +#define APBTMR_CONTROL_MODE_PERIODIC (1<<1) /*1: periodic 0:free running */ +#define APBTMR_CONTROL_INT (1<<2) + +/* default memory mapped register base */ +#define LNW_SCU_ADDR 0xFF100000 +#define LNW_EXT_TIMER_OFFSET 0x1B800 +#define APBT_DEFAULT_BASE (LNW_SCU_ADDR+LNW_EXT_TIMER_OFFSET) +#define LNW_EXT_TIMER_PGOFFSET 0x800 + +/* APBT clock speed range from PCLK to fabric base, 25-100MHz */ +#define APBT_MAX_FREQ 50 +#define APBT_MIN_FREQ 1 +#define APBT_MMAP_SIZE 1024 + +#define APBT_DEV_USED 1 + +extern void apbt_time_init(void); +extern struct clock_event_device *global_clock_event; +extern unsigned long apbt_quick_calibrate(void); +extern int arch_setup_apbt_irqs(int irq, int trigger, int mask, int cpu); +extern void apbt_setup_secondary_clock(void); +extern unsigned int boot_cpu_id; +extern int disable_apbt_percpu; + +extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint); +extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr); +extern int sfi_mtimer_num; + +#else /* CONFIG_APB_TIMER */ + +static inline unsigned long apbt_quick_calibrate(void) {return 0; } +static inline void apbt_time_init(void) {return 0; } + +#endif +#endif /* ASM_X86_APBT_H */ diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h index eeac829a0f4..a929c9ede33 100644 --- a/arch/x86/include/asm/hw_irq.h +++ b/arch/x86/include/asm/hw_irq.h @@ -53,13 +53,6 @@ extern void threshold_interrupt(void); extern void call_function_interrupt(void); extern void call_function_single_interrupt(void); -/* PIC specific functions */ -extern void disable_8259A_irq(unsigned int irq); -extern void enable_8259A_irq(unsigned int irq); -extern int i8259A_irq_pending(unsigned int irq); -extern void make_8259A_irq(unsigned int irq); -extern void init_8259A(int aeoi); - /* IOAPIC */ #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs)) extern unsigned long io_apic_irqs; diff --git a/arch/x86/include/asm/i8259.h b/arch/x86/include/asm/i8259.h index 7ec65b18085..1655147646a 100644 --- a/arch/x86/include/asm/i8259.h +++ b/arch/x86/include/asm/i8259.h @@ -26,11 +26,6 @@ extern unsigned int cached_irq_mask; extern raw_spinlock_t i8259A_lock; -extern void init_8259A(int auto_eoi); -extern void enable_8259A_irq(unsigned int irq); -extern void disable_8259A_irq(unsigned int irq); -extern unsigned int startup_8259A_irq(unsigned int irq); - /* the PIC may need a careful delay on some platforms, hence specific calls */ static inline unsigned char inb_pic(unsigned int port) { @@ -57,7 +52,17 @@ static inline void outb_pic(unsigned char value, unsigned int port) extern struct irq_chip i8259A_chip; -extern void mask_8259A(void); -extern void unmask_8259A(void); +struct legacy_pic { + int nr_legacy_irqs; + struct irq_chip *chip; + void (*mask_all)(void); + void (*restore_mask)(void); + void (*init)(int auto_eoi); + int (*irq_pending)(unsigned int irq); + void (*make_irq)(unsigned int irq); +}; + +extern struct legacy_pic *legacy_pic; +extern struct legacy_pic null_legacy_pic; #endif /* _ASM_X86_I8259_H */ diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 5f61f6e0ffd..35832a03a51 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -143,8 +143,6 @@ extern int noioapicreroute; /* 1 if the timer IRQ uses the '8259A Virtual Wire' mode */ extern int timer_through_8259; -extern void io_apic_disable_legacy(void); - /* * If we use the IO-APIC for IRQ routing, disable automatic * assignment of PCI IRQ's. @@ -189,6 +187,7 @@ extern struct mp_ioapic_gsi mp_gsi_routing[]; int mp_find_ioapic(int gsi); int mp_find_ioapic_pin(int ioapic, int gsi); void __init mp_register_ioapic(int id, u32 address, u32 gsi_base); +extern void __init pre_init_apic_IRQ0(void); #else /* !CONFIG_X86_IO_APIC */ @@ -198,7 +197,11 @@ static const int timer_through_8259 = 0; static inline void ioapic_init_mappings(void) { } static inline void ioapic_insert_resources(void) { } static inline void probe_nr_irqs_gsi(void) { } +static inline int mp_find_ioapic(int gsi) { return 0; } +struct io_apic_irq_attr; +static inline int io_apic_set_pci_routing(struct device *dev, int irq, + struct io_apic_irq_attr *irq_attr) { return 0; } #endif #endif /* _ASM_X86_IO_APIC_H */ diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h index 262292729fc..5458380b6ef 100644 --- a/arch/x86/include/asm/irq.h +++ b/arch/x86/include/asm/irq.h @@ -48,6 +48,5 @@ extern DECLARE_BITMAP(used_vectors, NR_VECTORS); extern int vector_used_by_percpu_irq(unsigned int vector); extern void init_ISA_irqs(void); -extern int nr_legacy_irqs; #endif /* _ASM_X86_IRQ_H */ diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h new file mode 100644 index 00000000000..451d30e7f62 --- /dev/null +++ b/arch/x86/include/asm/mrst.h @@ -0,0 +1,19 @@ +/* + * mrst.h: Intel Moorestown platform specific setup code + * + * (C) Copyright 2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ +#ifndef _ASM_X86_MRST_H +#define _ASM_X86_MRST_H +extern int pci_mrst_init(void); +int __init sfi_parse_mrtc(struct sfi_table_header *table); + +#define SFI_MTMR_MAX_NUM 8 +#define SFI_MRTC_MAX 8 + +#endif /* _ASM_X86_MRST_H */ diff --git a/arch/x86/include/asm/numaq.h b/arch/x86/include/asm/numaq.h index 13370b95ea9..37c516545ec 100644 --- a/arch/x86/include/asm/numaq.h +++ b/arch/x86/include/asm/numaq.h @@ -30,6 +30,7 @@ extern int found_numaq; extern int get_memcfg_numaq(void); +extern int pci_numaq_init(void); extern void *xquad_portio; diff --git a/arch/x86/include/asm/olpc.h b/arch/x86/include/asm/olpc.h index 3a57385d9fa..101229b0d8e 100644 --- a/arch/x86/include/asm/olpc.h +++ b/arch/x86/include/asm/olpc.h @@ -13,7 +13,6 @@ struct olpc_platform_t { #define OLPC_F_PRESENT 0x01 #define OLPC_F_DCON 0x02 -#define OLPC_F_VSA 0x04 #ifdef CONFIG_OLPC @@ -51,18 +50,6 @@ static inline int olpc_has_dcon(void) } /* - * The VSA is software from AMD that typical Geode bioses will include. - * It is used to emulate the PCI bus, VGA, etc. OLPC's Open Firmware does - * not include the VSA; instead, PCI is emulated by the kernel. - * - * The VSA is described further in arch/x86/pci/olpc.c. - */ -static inline int olpc_has_vsa(void) -{ - return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0; -} - -/* * The "Mass Production" version of OLPC's XO is identified as being model * C2. During the prototype phase, the following models (in chronological * order) were created: A1, B1, B2, B3, B4, C1. The A1 through B2 models @@ -87,13 +74,10 @@ static inline int olpc_has_dcon(void) return 0; } -static inline int olpc_has_vsa(void) -{ - return 0; -} - #endif +extern int pci_olpc_init(void); + /* EC related functions */ extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen, diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h index b4a00dd4eed..3e002ca5a28 100644 --- a/arch/x86/include/asm/pci.h +++ b/arch/x86/include/asm/pci.h @@ -45,8 +45,15 @@ static inline int pci_proc_domain(struct pci_bus *bus) #ifdef CONFIG_PCI extern unsigned int pcibios_assign_all_busses(void); +extern int pci_legacy_init(void); +# ifdef CONFIG_ACPI +# define x86_default_pci_init pci_acpi_init +# else +# define x86_default_pci_init pci_legacy_init +# endif #else -#define pcibios_assign_all_busses() 0 +# define pcibios_assign_all_busses() 0 +# define x86_default_pci_init NULL #endif extern unsigned long pci_mem_start; diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index 05b58ccb2e8..1a0422348d6 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -83,7 +83,6 @@ struct irq_routing_table { extern unsigned int pcibios_irq_mask; -extern int pcibios_scanned; extern spinlock_t pci_config_lock; extern int (*pcibios_enable_irq)(struct pci_dev *dev); @@ -106,16 +105,15 @@ extern bool port_cf9_safe; extern int pci_direct_probe(void); extern void pci_direct_init(int type); extern void pci_pcbios_init(void); -extern int pci_olpc_init(void); extern void __init dmi_check_pciprobe(void); extern void __init dmi_check_skip_isa_align(void); /* some common used subsys_initcalls */ extern int __init pci_acpi_init(void); -extern int __init pcibios_irq_init(void); -extern int __init pci_visws_init(void); -extern int __init pci_numaq_init(void); +extern void __init pcibios_irq_init(void); extern int __init pcibios_init(void); +extern int pci_legacy_init(void); +extern void pcibios_fixup_irqs(void); /* pci-mmconfig.c */ @@ -183,3 +181,17 @@ static inline void mmio_config_writel(void __iomem *pos, u32 val) { asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory"); } + +#ifdef CONFIG_PCI +# ifdef CONFIG_ACPI +# define x86_default_pci_init pci_acpi_init +# else +# define x86_default_pci_init pci_legacy_init +# endif +# define x86_default_pci_init_irq pcibios_irq_init +# define x86_default_pci_fixup_irqs pcibios_fixup_irqs +#else +# define x86_default_pci_init NULL +# define x86_default_pci_init_irq NULL +# define x86_default_pci_fixup_irqs NULL +#endif diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index 18e496c98ff..86b1506f417 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -37,10 +37,8 @@ void setup_bios_corruption_check(void); #ifdef CONFIG_X86_VISWS extern void visws_early_detect(void); -extern int is_visws_box(void); #else static inline void visws_early_detect(void) { } -static inline int is_visws_box(void) { return 0; } #endif extern unsigned long saved_video_mode; diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h index 166adf61e77..2edb37637ea 100644 --- a/arch/x86/include/asm/visws/cobalt.h +++ b/arch/x86/include/asm/visws/cobalt.h @@ -122,4 +122,6 @@ extern char visws_board_type; extern char visws_board_rev; +extern int pci_visws_init(void); + #endif /* _ASM_X86_VISWS_COBALT_H */ diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 60cc3526908..519b54327d7 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -99,6 +99,20 @@ struct x86_init_iommu { }; /** + * struct x86_init_pci - platform specific pci init functions + * @arch_init: platform specific pci arch init call + * @init: platform specific pci subsystem init + * @init_irq: platform specific pci irq init + * @fixup_irqs: platform specific pci irq fixup + */ +struct x86_init_pci { + int (*arch_init)(void); + int (*init)(void); + void (*init_irq)(void); + void (*fixup_irqs)(void); +}; + +/** * struct x86_init_ops - functions for platform specific setup * */ @@ -110,6 +124,7 @@ struct x86_init_ops { struct x86_init_paging paging; struct x86_init_timers timers; struct x86_init_iommu iommu; + struct x86_init_pci pci; }; /** diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index d87f09bc5a5..4c58352209e 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o +obj-$(CONFIG_APB_TIMER) += apb_timer.o obj-$(CONFIG_K8_NB) += k8.o obj-$(CONFIG_DEBUG_RODATA_TEST) += test_rodata.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 738fcb60e70..a54d714545f 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -35,6 +35,7 @@ #include <linux/ioport.h> #include <linux/pci.h> +#include <asm/pci_x86.h> #include <asm/pgtable.h> #include <asm/io_apic.h> #include <asm/apic.h> @@ -1624,6 +1625,9 @@ int __init acpi_boot_init(void) acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet); + if (!acpi_noirq) + x86_init.pci.init = pci_acpi_init; + return 0; } diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c new file mode 100644 index 00000000000..4b7099526d2 --- /dev/null +++ b/arch/x86/kernel/apb_timer.c @@ -0,0 +1,784 @@ +/* + * apb_timer.c: Driver for Langwell APB timers + * + * (C) Copyright 2009 Intel Corporation + * Author: Jacob Pan (jacob.jun.pan@intel.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + * + * Note: + * Langwell is the south complex of Intel Moorestown MID platform. There are + * eight external timers in total that can be used by the operating system. + * The timer information, such as frequency and addresses, is provided to the + * OS via SFI tables. + * Timer interrupts are routed via FW/HW emulated IOAPIC independently via + * individual redirection table entries (RTE). + * Unlike HPET, there is no master counter, therefore one of the timers are + * used as clocksource. The overall allocation looks like: + * - timer 0 - NR_CPUs for per cpu timer + * - one timer for clocksource + * - one timer for watchdog driver. + * It is also worth notice that APB timer does not support true one-shot mode, + * free-running mode will be used here to emulate one-shot mode. + * APB timer can also be used as broadcast timer along with per cpu local APIC + * timer, but by default APB timer has higher rating than local APIC timers. + */ + +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/sysdev.h> +#include <linux/pm.h> +#include <linux/pci.h> +#include <linux/sfi.h> +#include <linux/interrupt.h> +#include <linux/cpu.h> +#include <linux/irq.h> + +#include <asm/fixmap.h> +#include <asm/apb_timer.h> + +#define APBT_MASK CLOCKSOURCE_MASK(32) +#define APBT_SHIFT 22 +#define APBT_CLOCKEVENT_RATING 150 +#define APBT_CLOCKSOURCE_RATING 250 +#define APBT_MIN_DELTA_USEC 200 + +#define EVT_TO_APBT_DEV(evt) container_of(evt, struct apbt_dev, evt) +#define APBT_CLOCKEVENT0_NUM (0) +#define APBT_CLOCKEVENT1_NUM (1) +#define APBT_CLOCKSOURCE_NUM (2) + +static unsigned long apbt_address; +static int apb_timer_block_enabled; +static void __iomem *apbt_virt_address; +static int phy_cs_timer_id; + +/* + * Common DW APB timer info + */ +static uint64_t apbt_freq; + +static void apbt_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt); +static int apbt_next_event(unsigned long delta, + struct clock_event_device *evt); +static cycle_t apbt_read_clocksource(struct clocksource *cs); +static void apbt_restart_clocksource(struct clocksource *cs); + +struct apbt_dev { + struct clock_event_device evt; + unsigned int num; + int cpu; + unsigned int irq; + unsigned int tick; + unsigned int count; + unsigned int flags; + char name[10]; +}; + +int disable_apbt_percpu __cpuinitdata; + +static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev); + +#ifdef CONFIG_SMP +static unsigned int apbt_num_timers_used; +static struct apbt_dev *apbt_devs; +#endif + +static inline unsigned long apbt_readl_reg(unsigned long a) +{ + return readl(apbt_virt_address + a); +} + +static inline void apbt_writel_reg(unsigned long d, unsigned long a) +{ + writel(d, apbt_virt_address + a); +} + +static inline unsigned long apbt_readl(int n, unsigned long a) +{ + return readl(apbt_virt_address + a + n * APBTMRS_REG_SIZE); +} + +static inline void apbt_writel(int n, unsigned long d, unsigned long a) +{ + writel(d, apbt_virt_address + a + n * APBTMRS_REG_SIZE); +} + +static inline void apbt_set_mapping(void) +{ + struct sfi_timer_table_entry *mtmr; + + if (apbt_virt_address) { + pr_debug("APBT base already mapped\n"); + return; + } + mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); + if (mtmr == NULL) { + printk(KERN_ERR "Failed to get MTMR %d from SFI\n", + APBT_CLOCKEVENT0_NUM); + return; + } + apbt_address = (unsigned long)mtmr->phys_addr; + if (!apbt_address) { + printk(KERN_WARNING "No timer base from SFI, use default\n"); + apbt_address = APBT_DEFAULT_BASE; + } + apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE); + if (apbt_virt_address) { + pr_debug("Mapped APBT physical addr %p at virtual addr %p\n",\ + (void *)apbt_address, (void *)apbt_virt_address); + } else { + pr_debug("Failed mapping APBT phy address at %p\n",\ + (void *)apbt_address); + goto panic_noapbt; + } + apbt_freq = mtmr->freq_hz / USEC_PER_SEC; + sfi_free_mtmr(mtmr); + + /* Now figure out the physical timer id for clocksource device */ + mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM); + if (mtmr == NULL) + goto panic_noapbt; + + /* Now figure out the physical timer id */ + phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff) + / APBTMRS_REG_SIZE; + pr_debug("Use timer %d for clocksource\n", phy_cs_timer_id); + return; + +panic_noapbt: + panic("Failed to setup APB system timer\n"); + +} + +static inline void apbt_clear_mapping(void) +{ + iounmap(apbt_virt_address); + apbt_virt_address = NULL; +} + +/* + * APBT timer interrupt enable / disable + */ +static inline int is_apbt_capable(void) +{ + return apbt_virt_address ? 1 : 0; +} + +static struct clocksource clocksource_apbt = { + .name = "apbt", + .rating = APBT_CLOCKSOURCE_RATING, + .read = apbt_read_clocksource, + .mask = APBT_MASK, + .shift = APBT_SHIFT, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = apbt_restart_clocksource, +}; + +/* boot APB clock event device */ +static struct clock_event_device apbt_clockevent = { + .name = "apbt0", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = apbt_set_mode, + .set_next_event = apbt_next_event, + .shift = APBT_SHIFT, + .irq = 0, + .rating = APBT_CLOCKEVENT_RATING, +}; + +/* + * if user does not want to use per CPU apb timer, just give it a lower rating + * than local apic timer and skip the late per cpu timer init. + */ +static inline int __init setup_x86_mrst_timer(char *arg) +{ + if (!arg) + return -EINVAL; + + if (strcmp("apbt_only", arg) == 0) + disable_apbt_percpu = 0; + else if (strcmp("lapic_and_apbt", arg) == 0) + disable_apbt_percpu = 1; + else { + pr_warning("X86 MRST timer option %s not recognised" + " use x86_mrst_timer=apbt_only or lapic_and_apbt\n", + arg); + return -EINVAL; + } + return 0; +} +__setup("x86_mrst_timer=", setup_x86_mrst_timer); + +/* + * start count down from 0xffff_ffff. this is done by toggling the enable bit + * then load initial load count to ~0. + */ +static void apbt_start_counter(int n) +{ + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); + apbt_writel(n, ~0, APBTMR_N_LOAD_COUNT); + /* enable, mask interrupt */ + ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; + ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT); + apbt_writel(n, ctrl, APBTMR_N_CONTROL); + /* read it once to get cached counter value initialized */ + apbt_read_clocksource(&clocksource_apbt); +} + +static irqreturn_t apbt_interrupt_handler(int irq, void *data) +{ + struct apbt_dev *dev = (struct apbt_dev *)data; + struct clock_event_device *aevt = &dev->evt; + + if (!aevt->event_handler) { + printk(KERN_INFO "Spurious APBT timer interrupt on %d\n", + dev->num); + return IRQ_NONE; + } + aevt->event_handler(aevt); + return IRQ_HANDLED; +} + +static void apbt_restart_clocksource(struct clocksource *cs) +{ + apbt_start_counter(phy_cs_timer_id); +} + +/* Setup IRQ routing via IOAPIC */ +#ifdef CONFIG_SMP +static void apbt_setup_irq(struct apbt_dev *adev) +{ + struct irq_chip *chip; + struct irq_desc *desc; + + /* timer0 irq has been setup early */ + if (adev->irq == 0) + return; + desc = irq_to_desc(adev->irq); + chip = get_irq_chip(adev->irq); + disable_irq(adev->irq); + desc->status |= IRQ_MOVE_PCNTXT; + irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); + /* APB timer irqs are set up as mp_irqs, timer is edge triggerred */ + set_irq_chip_and_handler_name(adev->irq, chip, handle_edge_irq, "edge"); + enable_irq(adev->irq); + if (system_state == SYSTEM_BOOTING) + if (request_irq(adev->irq, apbt_interrupt_handler, + IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, + adev->name, adev)) { + printk(KERN_ERR "Failed request IRQ for APBT%d\n", + adev->num); + } +} +#endif + +static void apbt_enable_int(int n) +{ + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + /* clear pending intr */ + apbt_readl(n, APBTMR_N_EOI); + ctrl &= ~APBTMR_CONTROL_INT; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); +} + +static void apbt_disable_int(int n) +{ + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + + ctrl |= APBTMR_CONTROL_INT; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); +} + + +static int __init apbt_clockevent_register(void) +{ + struct sfi_timer_table_entry *mtmr; + struct apbt_dev *adev = &__get_cpu_var(cpu_apbt_dev); + + mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); + if (mtmr == NULL) { + printk(KERN_ERR "Failed to get MTMR %d from SFI\n", + APBT_CLOCKEVENT0_NUM); + return -ENODEV; + } + + /* + * We need to calculate the scaled math multiplication factor for + * nanosecond to apbt tick conversion. + * mult = (nsec/cycle)*2^APBT_SHIFT + */ + apbt_clockevent.mult = div_sc((unsigned long) mtmr->freq_hz + , NSEC_PER_SEC, APBT_SHIFT); + + /* Calculate the min / max delta */ + apbt_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, + &apbt_clockevent); + apbt_clockevent.min_delta_ns = clockevent_delta2ns( + APBT_MIN_DELTA_USEC*apbt_freq, + &apbt_clockevent); + /* + * Start apbt with the boot cpu mask and make it + * global if not used for per cpu timer. + */ + apbt_clockevent.cpumask = cpumask_of(smp_processor_id()); + adev->num = smp_processor_id(); + memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); + + if (disable_apbt_percpu) { + apbt_clockevent.rating = APBT_CLOCKEVENT_RATING - 100; + global_clock_event = &adev->evt; + printk(KERN_DEBUG "%s clockevent registered as global\n", + global_clock_event->name); + } + + if (request_irq(apbt_clockevent.irq, apbt_interrupt_handler, + IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING, + apbt_clockevent.name, adev)) { + printk(KERN_ERR "Failed request IRQ for APBT%d\n", + apbt_clockevent.irq); + } + + clockevents_register_device(&adev->evt); + /* Start APBT 0 interrupts */ + apbt_enable_int(APBT_CLOCKEVENT0_NUM); + + sfi_free_mtmr(mtmr); + return 0; +} + +#ifdef CONFIG_SMP +/* Should be called with per cpu */ +void apbt_setup_secondary_clock(void) +{ + struct apbt_dev *adev; + struct clock_event_device *aevt; + int cpu; + + /* Don't register boot CPU clockevent */ + cpu = smp_processor_id(); + if (cpu == boot_cpu_id) + return; + /* + * We need to calculate the scaled math multiplication factor for + * nanosecond to apbt tick conversion. + * mult = (nsec/cycle)*2^APBT_SHIFT + */ + printk(KERN_INFO "Init per CPU clockevent %d\n", cpu); + adev = &per_cpu(cpu_apbt_dev, cpu); + aevt = &adev->evt; + + memcpy(aevt, &apbt_clockevent, sizeof(*aevt)); + aevt->cpumask = cpumask_of(cpu); + aevt->name = adev->name; + aevt->mode = CLOCK_EVT_MODE_UNUSED; + + printk(KERN_INFO "Registering CPU %d clockevent device %s, mask %08x\n", + cpu, aevt->name, *(u32 *)aevt->cpumask); + + apbt_setup_irq(adev); + + clockevents_register_device(aevt); + + apbt_enable_int(cpu); + + return; +} + +/* + * this notify handler process CPU hotplug events. in case of S0i3, nonboot + * cpus are disabled/enabled frequently, for performance reasons, we keep the + * per cpu timer irq registered so that we do need to do free_irq/request_irq. + * + * TODO: it might be more reliable to directly disable percpu clockevent device + * without the notifier chain. currently, cpu 0 may get interrupts from other + * cpu timers during the offline process due to the ordering of notification. + * the extra interrupt is harmless. + */ +static int apbt_cpuhp_notify(struct notifier_block *n, + unsigned long action, void *hcpu) +{ + unsigned long cpu = (unsigned long)hcpu; + struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu); + + switch (action & 0xf) { + case CPU_DEAD: + apbt_disable_int(cpu); + if (system_state == SYSTEM_RUNNING) + pr_debug("skipping APBT CPU %lu offline\n", cpu); + else if (adev) { + pr_debug("APBT clockevent for cpu %lu offline\n", cpu); + free_irq(adev->irq, adev); + } + break; + default: + pr_debug(KERN_INFO "APBT notified %lu, no action\n", action); + } + return NOTIFY_OK; +} + +static __init int apbt_late_init(void) +{ + if (disable_apbt_percpu) + return 0; + /* This notifier should be called after workqueue is ready */ + hotcpu_notifier(apbt_cpuhp_notify, -20); + return 0; +} +fs_initcall(apbt_late_init); +#else + +void apbt_setup_secondary_clock(void) {} + +#endif /* CONFIG_SMP */ + +static void apbt_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + unsigned long ctrl; + uint64_t delta; + int timer_num; + struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); + + timer_num = adev->num; + pr_debug("%s CPU %d timer %d mode=%d\n", + __func__, first_cpu(*evt->cpumask), timer_num, mode); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * apbt_clockevent.mult; + delta >>= apbt_clockevent.shift; + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + ctrl |= APBTMR_CONTROL_MODE_PERIODIC; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + /* + * DW APB p. 46, have to disable timer before load counter, + * may cause sync problem. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + udelay(1); + pr_debug("Setting clock period %d for HZ %d\n", (int)delta, HZ); + apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT); + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + break; + /* APB timer does not have one-shot mode, use free running mode */ + case CLOCK_EVT_MODE_ONESHOT: + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + /* + * set free running mode, this mode will let timer reload max + * timeout which will give time (3min on 25MHz clock) to rearm + * the next event, therefore emulate the one-shot mode. + */ + ctrl &= ~APBTMR_CONTROL_ENABLE; + ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; + + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + /* write again to set free running mode */ + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + + /* + * DW APB p. 46, load counter with all 1s before starting free + * running mode. + */ + apbt_writel(timer_num, ~0, APBTMR_N_LOAD_COUNT); + ctrl &= ~APBTMR_CONTROL_INT; + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + break; + + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + apbt_disable_int(timer_num); + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + break; + + case CLOCK_EVT_MODE_RESUME: + apbt_enable_int(timer_num); + break; + } +} + +static int apbt_next_event(unsigned long delta, + struct clock_event_device *evt) +{ + unsigned long ctrl; + int timer_num; + + struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); + + timer_num = adev->num; + /* Disable timer */ + ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + /* write new count */ + apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT); + ctrl |= APBTMR_CONTROL_ENABLE; + apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); + return 0; +} + +/* + * APB timer clock is not in sync with pclk on Langwell, which translates to + * unreliable read value caused by sampling error. the error does not add up + * overtime and only happens when sampling a 0 as a 1 by mistake. so the time + * would go backwards. the following code is trying to prevent time traveling + * backwards. little bit paranoid. + */ +static cycle_t apbt_read_clocksource(struct clocksource *cs) +{ + unsigned long t0, t1, t2; + static unsigned long last_read; + +bad_count: + t1 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + t2 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + if (unlikely(t1 < t2)) { + pr_debug("APBT: read current count error %lx:%lx:%lx\n", + t1, t2, t2 - t1); + goto bad_count; + } + /* + * check against cached last read, makes sure time does not go back. + * it could be a normal rollover but we will do tripple check anyway + */ + if (unlikely(t2 > last_read)) { + /* check if we have a normal rollover */ + unsigned long raw_intr_status = + apbt_readl_reg(APBTMRS_RAW_INT_STATUS); + /* + * cs timer interrupt is masked but raw intr bit is set if + * rollover occurs. then we read EOI reg to clear it. + */ + if (raw_intr_status & (1 << phy_cs_timer_id)) { + apbt_readl(phy_cs_timer_id, APBTMR_N_EOI); + goto out; + } + pr_debug("APB CS going back %lx:%lx:%lx ", + t2, last_read, t2 - last_read); +bad_count_x3: + pr_debug(KERN_INFO "tripple check enforced\n"); + t0 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + udelay(1); + t1 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + udelay(1); + t2 = apbt_readl(phy_cs_timer_id, + APBTMR_N_CURRENT_VALUE); + if ((t2 > t1) || (t1 > t0)) { + printk(KERN_ERR "Error: APB CS tripple check failed\n"); + goto bad_count_x3; + } + } +out: + last_read = t2; + return (cycle_t)~t2; +} + +static int apbt_clocksource_register(void) +{ + u64 start, now; + cycle_t t1; + + /* Start the counter, use timer 2 as source, timer 0/1 for event */ + apbt_start_counter(phy_cs_timer_id); + + /* Verify whether apbt counter works */ + t1 = apbt_read_clocksource(&clocksource_apbt); + rdtscll(start); + + /* + * We don't know the TSC frequency yet, but waiting for + * 200000 TSC cycles is safe: + * 4 GHz == 50us + * 1 GHz == 200us + */ + do { + rep_nop(); + rdtscll(now); + } while ((now - start) < 200000UL); + + /* APBT is the only always on clocksource, it has to work! */ + if (t1 == apbt_read_clocksource(&clocksource_apbt)) + panic("APBT counter not counting. APBT disabled\n"); + + /* + * initialize and register APBT clocksource + * convert that to ns/clock cycle + * mult = (ns/c) * 2^APBT_SHIFT + */ + clocksource_apbt.mult = div_sc(MSEC_PER_SEC, + (unsigned long) apbt_freq, APBT_SHIFT); + clocksource_register(&clocksource_apbt); + + return 0; +} + +/* + * Early setup the APBT timer, only use timer 0 for booting then switch to + * per CPU timer if possible. + * returns 1 if per cpu apbt is setup + * returns 0 if no per cpu apbt is chosen + * panic if set up failed, this is the only platform timer on Moorestown. + */ +void __init apbt_time_init(void) +{ +#ifdef CONFIG_SMP + int i; + struct sfi_timer_table_entry *p_mtmr; + unsigned int percpu_timer; + struct apbt_dev *adev; +#endif + + if (apb_timer_block_enabled) + return; + apbt_set_mapping(); + if (apbt_virt_address) { + pr_debug("Found APBT version 0x%lx\n",\ + apbt_readl_reg(APBTMRS_COMP_VERSION)); + } else + goto out_noapbt; + /* + * Read the frequency and check for a sane value, for ESL model + * we extend the possible clock range to allow time scaling. + */ + + if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) { + pr_debug("APBT has invalid freq 0x%llx\n", apbt_freq); + goto out_noapbt; + } + if (apbt_clocksource_register()) { + pr_debug("APBT has failed to register clocksource\n"); + goto out_noapbt; + } + if (!apbt_clockevent_register()) + apb_timer_block_enabled = 1; + else { + pr_debug("APBT has failed to register clockevent\n"); + goto out_noapbt; + } +#ifdef CONFIG_SMP + /* kernel cmdline disable apb timer, so we will use lapic timers */ + if (disable_apbt_percpu) { + printk(KERN_INFO "apbt: disabled per cpu timer\n"); + return; + } + pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus()); + if (num_possible_cpus() <= sfi_mtimer_num) { + percpu_timer = 1; + apbt_num_timers_used = num_possible_cpus(); + } else { + percpu_timer = 0; + apbt_num_timers_used = 1; + adev = &per_cpu(cpu_apbt_dev, 0); + adev->flags &= ~APBT_DEV_USED; + } + pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used); + + /* here we set up per CPU timer data structure */ + apbt_devs = kzalloc(sizeof(struct apbt_dev) * apbt_num_timers_used, + GFP_KERNEL); + if (!apbt_devs) { + printk(KERN_ERR "Failed to allocate APB timer devices\n"); + return; + } + for (i = 0; i < apbt_num_timers_used; i++) { + adev = &per_cpu(cpu_apbt_dev, i); + adev->num = i; + adev->cpu = i; + p_mtmr = sfi_get_mtmr(i); + if (p_mtmr) { + adev->tick = p_mtmr->freq_hz; + adev->irq = p_mtmr->irq; + } else + printk(KERN_ERR "Failed to get timer for cpu %d\n", i); + adev->count = 0; + sprintf(adev->name, "apbt%d", i); + } +#endif + + return; + +out_noapbt: + apbt_clear_mapping(); + apb_timer_block_enabled = 0; + panic("failed to enable APB timer\n"); +} + +static inline void apbt_disable(int n) +{ + if (is_apbt_capable()) { + unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); + ctrl &= ~APBTMR_CONTROL_ENABLE; + apbt_writel(n, ctrl, APBTMR_N_CONTROL); + } +} + +/* called before apb_timer_enable, use early map */ +unsigned long apbt_quick_calibrate() +{ + int i, scale; + u64 old, new; + cycle_t t1, t2; + unsigned long khz = 0; + u32 loop, shift; + + apbt_set_mapping(); + apbt_start_counter(phy_cs_timer_id); + + /* check if the timer can count down, otherwise return */ + old = apbt_read_clocksource(&clocksource_apbt); + i = 10000; + while (--i) { + if (old != apbt_read_clocksource(&clocksource_apbt)) + break; + } + if (!i) + goto failed; + + /* count 16 ms */ + loop = (apbt_freq * 1000) << 4; + + /* restart the timer to ensure it won't get to 0 in the calibration */ + apbt_start_counter(phy_cs_timer_id); + + old = apbt_read_clocksource(&clocksource_apbt); + old += loop; + + t1 = __native_read_tsc(); + + do { + new = apbt_read_clocksource(&clocksource_apbt); + } while (new < old); + + t2 = __native_read_tsc(); + + shift = 5; + if (unlikely(loop >> shift == 0)) { + printk(KERN_INFO + "APBT TSC calibration failed, not enough resolution\n"); + return 0; + } + scale = (int)div_u64((t2 - t1), loop >> shift); + khz = (scale * apbt_freq * 1000) >> shift; + printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz); + return khz; +failed: + return 0; +} diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 6e29b2a77aa..00187f1fcfb 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1390,7 +1390,7 @@ void __init enable_IR_x2apic(void) } local_irq_save(flags); - mask_8259A(); + legacy_pic->mask_all(); mask_IO_APIC_setup(ioapic_entries); if (dmar_table_init_ret) @@ -1422,7 +1422,7 @@ void __init enable_IR_x2apic(void) nox2apic: if (!ret) /* IR enabling failed */ restore_IO_APIC_setup(ioapic_entries); - unmask_8259A(); + legacy_pic->restore_mask(); local_irq_restore(flags); out: @@ -2018,7 +2018,7 @@ static int lapic_resume(struct sys_device *dev) } mask_IO_APIC_setup(ioapic_entries); - mask_8259A(); + legacy_pic->mask_all(); } if (x2apic_mode) @@ -2062,7 +2062,7 @@ static int lapic_resume(struct sys_device *dev) if (intr_remapping_enabled) { reenable_intr_remapping(x2apic_mode); - unmask_8259A(); + legacy_pic->restore_mask(); restore_IO_APIC_setup(ioapic_entries); free_ioapic_entries(ioapic_entries); } diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 14862f11cc4..e4e0ddcb154 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -143,12 +143,6 @@ static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY]; static struct irq_cfg irq_cfgx[NR_IRQS]; #endif -void __init io_apic_disable_legacy(void) -{ - nr_legacy_irqs = 0; - nr_irqs_gsi = 0; -} - int __init arch_early_irq_init(void) { struct irq_cfg *cfg; @@ -157,6 +151,11 @@ int __init arch_early_irq_init(void) int node; int i; + if (!legacy_pic->nr_legacy_irqs) { + nr_irqs_gsi = 0; + io_apic_irqs = ~0UL; + } + cfg = irq_cfgx; count = ARRAY_SIZE(irq_cfgx); node= cpu_to_node(boot_cpu_id); @@ -170,7 +169,7 @@ int __init arch_early_irq_init(void) * For legacy IRQ's, start with assigning irq0 to irq15 to * IRQ0_VECTOR to IRQ15_VECTOR on cpu 0. */ - if (i < nr_legacy_irqs) { + if (i < legacy_pic->nr_legacy_irqs) { cfg[i].vector = IRQ0_VECTOR + i; cpumask_set_cpu(0, cfg[i].domain); } @@ -852,7 +851,7 @@ static int __init find_isa_irq_apic(int irq, int type) */ static int EISA_ELCR(unsigned int irq) { - if (irq < nr_legacy_irqs) { + if (irq < legacy_pic->nr_legacy_irqs) { unsigned int port = 0x4d0 + (irq >> 3); return (inb(port) >> (irq & 7)) & 1; } @@ -1439,7 +1438,7 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq * controllers like 8259. Now that IO-APIC can handle this irq, update * the cfg->domain. */ - if (irq < nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain)) + if (irq < legacy_pic->nr_legacy_irqs && cpumask_test_cpu(0, cfg->domain)) apic->vector_allocation_domain(0, cfg->domain); if (assign_irq_vector(irq, cfg, apic->target_cpus())) @@ -1463,8 +1462,8 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq } ioapic_register_intr(irq, desc, trigger); - if (irq < nr_legacy_irqs) - disable_8259A_irq(irq); + if (irq < legacy_pic->nr_legacy_irqs) + legacy_pic->chip->mask(irq); ioapic_write_entry(apic_id, pin, entry); } @@ -1873,7 +1872,7 @@ __apicdebuginit(void) print_PIC(void) unsigned int v; unsigned long flags; - if (!nr_legacy_irqs) + if (!legacy_pic->nr_legacy_irqs) return; printk(KERN_DEBUG "\nprinting PIC contents\n"); @@ -1957,7 +1956,7 @@ void __init enable_IO_APIC(void) nr_ioapic_registers[apic] = reg_01.bits.entries+1; } - if (!nr_legacy_irqs) + if (!legacy_pic->nr_legacy_irqs) return; for(apic = 0; apic < nr_ioapics; apic++) { @@ -2014,7 +2013,7 @@ void disable_IO_APIC(void) */ clear_IO_APIC(); - if (!nr_legacy_irqs) + if (!legacy_pic->nr_legacy_irqs) return; /* @@ -2247,9 +2246,9 @@ static unsigned int startup_ioapic_irq(unsigned int irq) struct irq_cfg *cfg; raw_spin_lock_irqsave(&ioapic_lock, flags); - if (irq < nr_legacy_irqs) { - disable_8259A_irq(irq); - if (i8259A_irq_pending(irq)) + if (irq < legacy_pic->nr_legacy_irqs) { + legacy_pic->chip->mask(irq); + if (legacy_pic->irq_pending(irq)) was_pending = 1; } cfg = irq_cfg(irq); @@ -2782,8 +2781,8 @@ static inline void init_IO_APIC_traps(void) * so default to an old-fashioned 8259 * interrupt if we can.. */ - if (irq < nr_legacy_irqs) - make_8259A_irq(irq); + if (irq < legacy_pic->nr_legacy_irqs) + legacy_pic->make_irq(irq); else /* Strange. Oh, well.. */ desc->chip = &no_irq_chip; @@ -2940,7 +2939,7 @@ static inline void __init check_timer(void) /* * get/set the timer IRQ vector: */ - disable_8259A_irq(0); + legacy_pic->chip->mask(0); assign_irq_vector(0, cfg, apic->target_cpus()); /* @@ -2953,7 +2952,7 @@ static inline void __init check_timer(void) * automatically. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - init_8259A(1); + legacy_pic->init(1); #ifdef CONFIG_X86_32 { unsigned int ver; @@ -3012,7 +3011,7 @@ static inline void __init check_timer(void) if (timer_irq_works()) { if (nmi_watchdog == NMI_IO_APIC) { setup_nmi(); - enable_8259A_irq(0); + legacy_pic->chip->unmask(0); } if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); @@ -3035,14 +3034,14 @@ static inline void __init check_timer(void) */ replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2); setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); - enable_8259A_irq(0); + legacy_pic->chip->unmask(0); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); + legacy_pic->chip->mask(0); setup_nmi(); - enable_8259A_irq(0); + legacy_pic->chip->unmask(0); } goto out; } @@ -3050,7 +3049,7 @@ static inline void __init check_timer(void) * Cleanup, just in case ... */ local_irq_disable(); - disable_8259A_irq(0); + legacy_pic->chip->mask(0); clear_IO_APIC_pin(apic2, pin2); apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } @@ -3069,22 +3068,22 @@ static inline void __init check_timer(void) lapic_register_intr(0, desc); apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ - enable_8259A_irq(0); + legacy_pic->chip->unmask(0); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } local_irq_disable(); - disable_8259A_irq(0); + legacy_pic->chip->mask(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as ExtINT IRQ...\n"); - init_8259A(0); - make_8259A_irq(0); + legacy_pic->init(0); + legacy_pic->make_irq(0); apic_write(APIC_LVT0, APIC_DM_EXTINT); unlock_ExtINT_logic(); @@ -3126,7 +3125,7 @@ void __init setup_IO_APIC(void) /* * calling enable_IO_APIC() is moved to setup_local_APIC for BP */ - io_apic_irqs = nr_legacy_irqs ? ~PIC_IRQS : ~0UL; + io_apic_irqs = legacy_pic->nr_legacy_irqs ? ~PIC_IRQS : ~0UL; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); /* @@ -3137,7 +3136,7 @@ void __init setup_IO_APIC(void) sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); - if (nr_legacy_irqs) + if (legacy_pic->nr_legacy_irqs) check_timer(); } @@ -3928,7 +3927,7 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq, /* * IRQs < 16 are already in the irq_2_pin[] map */ - if (irq >= nr_legacy_irqs) { + if (irq >= legacy_pic->nr_legacy_irqs) { cfg = desc->chip_data; if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) { printk(KERN_INFO "can not add pin %d for irq %d\n", @@ -4302,3 +4301,24 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) nr_ioapics++; } + +/* Enable IOAPIC early just for system timer */ +void __init pre_init_apic_IRQ0(void) +{ + struct irq_cfg *cfg; + struct irq_desc *desc; + + printk(KERN_INFO "Early APIC setup for system timer0\n"); +#ifndef CONFIG_SMP + phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid); +#endif + desc = irq_to_desc_alloc_node(0, 0); + + setup_local_APIC(); + + cfg = irq_cfg(0); + add_pin_to_irq_node(cfg, 0, 0, 0); + set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); + + setup_IO_APIC_irq(0, 0, 0, desc, 0, 0); +} diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index bd7c96b5e8d..8aa65adbd25 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -177,7 +177,7 @@ int __init check_nmi_watchdog(void) error: if (nmi_watchdog == NMI_IO_APIC) { if (!timer_through_8259) - disable_8259A_irq(0); + legacy_pic->chip->mask(0); on_each_cpu(__acpi_nmi_disable, NULL, 1); } diff --git a/arch/x86/kernel/apic/numaq_32.c b/arch/x86/kernel/apic/numaq_32.c index 47dd856708e..3e28401f161 100644 --- a/arch/x86/kernel/apic/numaq_32.c +++ b/arch/x86/kernel/apic/numaq_32.c @@ -277,6 +277,7 @@ static __init void early_check_numaq(void) x86_init.mpparse.mpc_oem_pci_bus = mpc_oem_pci_bus; x86_init.mpparse.mpc_oem_bus_info = mpc_oem_bus_info; x86_init.timers.tsc_pre_init = numaq_tsc_init; + x86_init.pci.init = pci_numaq_init; } } diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c index 8c93a84bb62..fb725ee15f5 100644 --- a/arch/x86/kernel/i8259.c +++ b/arch/x86/kernel/i8259.c @@ -34,6 +34,12 @@ static int i8259A_auto_eoi; DEFINE_RAW_SPINLOCK(i8259A_lock); static void mask_and_ack_8259A(unsigned int); +static void mask_8259A(void); +static void unmask_8259A(void); +static void disable_8259A_irq(unsigned int irq); +static void enable_8259A_irq(unsigned int irq); +static void init_8259A(int auto_eoi); +static int i8259A_irq_pending(unsigned int irq); struct irq_chip i8259A_chip = { .name = "XT-PIC", @@ -63,7 +69,7 @@ unsigned int cached_irq_mask = 0xffff; */ unsigned long io_apic_irqs; -void disable_8259A_irq(unsigned int irq) +static void disable_8259A_irq(unsigned int irq) { unsigned int mask = 1 << irq; unsigned long flags; @@ -77,7 +83,7 @@ void disable_8259A_irq(unsigned int irq) raw_spin_unlock_irqrestore(&i8259A_lock, flags); } -void enable_8259A_irq(unsigned int irq) +static void enable_8259A_irq(unsigned int irq) { unsigned int mask = ~(1 << irq); unsigned long flags; @@ -91,7 +97,7 @@ void enable_8259A_irq(unsigned int irq) raw_spin_unlock_irqrestore(&i8259A_lock, flags); } -int i8259A_irq_pending(unsigned int irq) +static int i8259A_irq_pending(unsigned int irq) { unsigned int mask = 1<<irq; unsigned long flags; @@ -107,7 +113,7 @@ int i8259A_irq_pending(unsigned int irq) return ret; } -void make_8259A_irq(unsigned int irq) +static void make_8259A_irq(unsigned int irq) { disable_irq_nosync(irq); io_apic_irqs &= ~(1<<irq); @@ -281,7 +287,7 @@ static int __init i8259A_init_sysfs(void) device_initcall(i8259A_init_sysfs); -void mask_8259A(void) +static void mask_8259A(void) { unsigned long flags; @@ -293,7 +299,7 @@ void mask_8259A(void) raw_spin_unlock_irqrestore(&i8259A_lock, flags); } -void unmask_8259A(void) +static void unmask_8259A(void) { unsigned long flags; @@ -305,7 +311,7 @@ void unmask_8259A(void) raw_spin_unlock_irqrestore(&i8259A_lock, flags); } -void init_8259A(int auto_eoi) +static void init_8259A(int auto_eoi) { unsigned long flags; @@ -358,3 +364,47 @@ void init_8259A(int auto_eoi) raw_spin_unlock_irqrestore(&i8259A_lock, flags); } + +/* + * make i8259 a driver so that we can select pic functions at run time. the goal + * is to make x86 binary compatible among pc compatible and non-pc compatible + * platforms, such as x86 MID. + */ + +static void legacy_pic_noop(void) { }; +static void legacy_pic_uint_noop(unsigned int unused) { }; +static void legacy_pic_int_noop(int unused) { }; + +static struct irq_chip dummy_pic_chip = { + .name = "dummy pic", + .mask = legacy_pic_uint_noop, + .unmask = legacy_pic_uint_noop, + .disable = legacy_pic_uint_noop, + .mask_ack = legacy_pic_uint_noop, +}; +static int legacy_pic_irq_pending_noop(unsigned int irq) +{ + return 0; +} + +struct legacy_pic null_legacy_pic = { + .nr_legacy_irqs = 0, + .chip = &dummy_pic_chip, + .mask_all = legacy_pic_noop, + .restore_mask = legacy_pic_noop, + .init = legacy_pic_int_noop, + .irq_pending = legacy_pic_irq_pending_noop, + .make_irq = legacy_pic_uint_noop, +}; + +struct legacy_pic default_legacy_pic = { + .nr_legacy_irqs = NR_IRQS_LEGACY, + .chip = &i8259A_chip, + .mask_all = mask_8259A, + .restore_mask = unmask_8259A, + .init = init_8259A, + .irq_pending = i8259A_irq_pending, + .make_irq = make_8259A_irq, +}; + +struct legacy_pic *legacy_pic = &default_legacy_pic; diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index fce55d53263..ef257fc2921 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -99,9 +99,6 @@ int vector_used_by_percpu_irq(unsigned int vector) return 0; } -/* Number of legacy interrupts */ -int nr_legacy_irqs __read_mostly = NR_IRQS_LEGACY; - void __init init_ISA_irqs(void) { int i; @@ -109,12 +106,12 @@ void __init init_ISA_irqs(void) #if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) init_bsp_APIC(); #endif - init_8259A(0); + legacy_pic->init(0); /* * 16 old-style INTA-cycle interrupts: */ - for (i = 0; i < NR_IRQS_LEGACY; i++) { + for (i = 0; i < legacy_pic->nr_legacy_irqs; i++) { struct irq_desc *desc = irq_to_desc(i); desc->status = IRQ_DISABLED; @@ -138,7 +135,7 @@ void __init init_IRQ(void) * then this vector space can be freed and re-used dynamically as the * irq's migrate etc. */ - for (i = 0; i < nr_legacy_irqs; i++) + for (i = 0; i < legacy_pic->nr_legacy_irqs; i++) per_cpu(vector_irq, 0)[IRQ0_VECTOR + i] = i; x86_init.irqs.intr_init(); diff --git a/arch/x86/kernel/mrst.c b/arch/x86/kernel/mrst.c index 3b7078abc87..0aad8670858 100644 --- a/arch/x86/kernel/mrst.c +++ b/arch/x86/kernel/mrst.c @@ -10,8 +10,211 @@ * of the License. */ #include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sfi.h> +#include <linux/irq.h> +#include <linux/module.h> #include <asm/setup.h> +#include <asm/mpspec_def.h> +#include <asm/hw_irq.h> +#include <asm/apic.h> +#include <asm/io_apic.h> +#include <asm/mrst.h> +#include <asm/io.h> +#include <asm/i8259.h> +#include <asm/apb_timer.h> + +static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; +static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; +int sfi_mtimer_num; + +struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; +EXPORT_SYMBOL_GPL(sfi_mrtc_array); +int sfi_mrtc_num; + +static inline void assign_to_mp_irq(struct mpc_intsrc *m, + struct mpc_intsrc *mp_irq) +{ + memcpy(mp_irq, m, sizeof(struct mpc_intsrc)); +} + +static inline int mp_irq_cmp(struct mpc_intsrc *mp_irq, + struct mpc_intsrc *m) +{ + return memcmp(mp_irq, m, sizeof(struct mpc_intsrc)); +} + +static void save_mp_irq(struct mpc_intsrc *m) +{ + int i; + + for (i = 0; i < mp_irq_entries; i++) { + if (!mp_irq_cmp(&mp_irqs[i], m)) + return; + } + + assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]); + if (++mp_irq_entries == MAX_IRQ_SOURCES) + panic("Max # of irq sources exceeded!!\n"); +} + +/* parse all the mtimer info to a static mtimer array */ +static int __init sfi_parse_mtmr(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_timer_table_entry *pentry; + struct mpc_intsrc mp_irq; + int totallen; + + sb = (struct sfi_table_simple *)table; + if (!sfi_mtimer_num) { + sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, + struct sfi_timer_table_entry); + pentry = (struct sfi_timer_table_entry *) sb->pentry; + totallen = sfi_mtimer_num * sizeof(*pentry); + memcpy(sfi_mtimer_array, pentry, totallen); + } + + printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num); + pentry = sfi_mtimer_array; + for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { + printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz," + " irq = %d\n", totallen, (u32)pentry->phys_addr, + pentry->freq_hz, pentry->irq); + if (!pentry->irq) + continue; + mp_irq.type = MP_IOAPIC; + mp_irq.irqtype = mp_INT; +/* triggering mode edge bit 2-3, active high polarity bit 0-1 */ + mp_irq.irqflag = 5; + mp_irq.srcbus = 0; + mp_irq.srcbusirq = pentry->irq; /* IRQ */ + mp_irq.dstapic = MP_APIC_ALL; + mp_irq.dstirq = pentry->irq; + save_mp_irq(&mp_irq); + } + + return 0; +} + +struct sfi_timer_table_entry *sfi_get_mtmr(int hint) +{ + int i; + if (hint < sfi_mtimer_num) { + if (!sfi_mtimer_usage[hint]) { + pr_debug("hint taken for timer %d irq %d\n",\ + hint, sfi_mtimer_array[hint].irq); + sfi_mtimer_usage[hint] = 1; + return &sfi_mtimer_array[hint]; + } + } + /* take the first timer available */ + for (i = 0; i < sfi_mtimer_num;) { + if (!sfi_mtimer_usage[i]) { + sfi_mtimer_usage[i] = 1; + return &sfi_mtimer_array[i]; + } + i++; + } + return NULL; +} + +void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) +{ + int i; + for (i = 0; i < sfi_mtimer_num;) { + if (mtmr->irq == sfi_mtimer_array[i].irq) { + sfi_mtimer_usage[i] = 0; + return; + } + i++; + } +} + +/* parse all the mrtc info to a global mrtc array */ +int __init sfi_parse_mrtc(struct sfi_table_header *table) +{ + struct sfi_table_simple *sb; + struct sfi_rtc_table_entry *pentry; + struct mpc_intsrc mp_irq; + + int totallen; + + sb = (struct sfi_table_simple *)table; + if (!sfi_mrtc_num) { + sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, + struct sfi_rtc_table_entry); + pentry = (struct sfi_rtc_table_entry *)sb->pentry; + totallen = sfi_mrtc_num * sizeof(*pentry); + memcpy(sfi_mrtc_array, pentry, totallen); + } + + printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num); + pentry = sfi_mrtc_array; + for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { + printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n", + totallen, (u32)pentry->phys_addr, pentry->irq); + mp_irq.type = MP_IOAPIC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = 0; + mp_irq.srcbus = 0; + mp_irq.srcbusirq = pentry->irq; /* IRQ */ + mp_irq.dstapic = MP_APIC_ALL; + mp_irq.dstirq = pentry->irq; + save_mp_irq(&mp_irq); + } + return 0; +} + +/* + * the secondary clock in Moorestown can be APBT or LAPIC clock, default to + * APBT but cmdline option can also override it. + */ +static void __cpuinit mrst_setup_secondary_clock(void) +{ + /* restore default lapic clock if disabled by cmdline */ + if (disable_apbt_percpu) + return setup_secondary_APIC_clock(); + apbt_setup_secondary_clock(); +} + +static unsigned long __init mrst_calibrate_tsc(void) +{ + unsigned long flags, fast_calibrate; + + local_irq_save(flags); + fast_calibrate = apbt_quick_calibrate(); + local_irq_restore(flags); + + if (fast_calibrate) + return fast_calibrate; + + return 0; +} + +void __init mrst_time_init(void) +{ + sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); + pre_init_apic_IRQ0(); + apbt_time_init(); +} + +void __init mrst_rtc_init(void) +{ + sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); +} + +/* + * if we use per cpu apb timer, the bootclock already setup. if we use lapic + * timer and one apbt timer for broadcast, we need to set up lapic boot clock. + */ +static void __init mrst_setup_boot_clock(void) +{ + pr_info("%s: per cpu apbt flag %d \n", __func__, disable_apbt_percpu); + if (disable_apbt_percpu) + setup_boot_APIC_clock(); +}; /* * Moorestown specific x86_init function overrides and early setup @@ -21,4 +224,17 @@ void __init x86_mrst_early_setup(void) { x86_init.resources.probe_roms = x86_init_noop; x86_init.resources.reserve_resources = x86_init_noop; + + x86_init.timers.timer_init = mrst_time_init; + x86_init.timers.setup_percpu_clockev = mrst_setup_boot_clock; + + x86_init.irqs.pre_vector_init = x86_init_noop; + + x86_cpuinit.setup_percpu_clockev = mrst_setup_secondary_clock; + + x86_platform.calibrate_tsc = mrst_calibrate_tsc; + x86_init.pci.init = pci_mrst_init; + x86_init.pci.fixup_irqs = x86_init_noop; + + legacy_pic = &null_legacy_pic; } diff --git a/arch/x86/kernel/olpc.c b/arch/x86/kernel/olpc.c index 9d1d263f786..8297160c41b 100644 --- a/arch/x86/kernel/olpc.c +++ b/arch/x86/kernel/olpc.c @@ -17,7 +17,9 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <linux/string.h> + #include <asm/geode.h> +#include <asm/setup.h> #include <asm/olpc.h> #ifdef CONFIG_OPEN_FIRMWARE @@ -243,9 +245,11 @@ static int __init olpc_init(void) olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, (unsigned char *) &olpc_platform_info.ecver, 1); - /* check to see if the VSA exists */ - if (cs5535_has_vsa2()) - olpc_platform_info.flags |= OLPC_F_VSA; +#ifdef CONFIG_PCI_OLPC + /* If the VSA exists let it emulate PCI, if not emulate in kernel */ + if (!cs5535_has_vsa2()) + x86_init.pci.arch_init = pci_olpc_init; +#endif printk(KERN_INFO "OLPC board revision %s%X (EC=%x)\n", ((olpc_platform_info.boardrev & 0xf) < 8) ? "pre" : "", diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index a435c76d714..a02e80c3c54 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -48,6 +48,7 @@ #include <linux/err.h> #include <linux/nmi.h> #include <linux/tboot.h> +#include <linux/stackprotector.h> #include <asm/acpi.h> #include <asm/desc.h> @@ -67,6 +68,7 @@ #include <linux/mc146818rtc.h> #include <asm/smpboot_hooks.h> +#include <asm/i8259.h> #ifdef CONFIG_X86_32 u8 apicid_2_node[MAX_APICID]; @@ -291,9 +293,9 @@ notrace static void __cpuinit start_secondary(void *unused) check_tsc_sync_target(); if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); + legacy_pic->chip->mask(0); enable_NMI_through_LVT0(); - enable_8259A_irq(0); + legacy_pic->chip->unmask(0); } #ifdef CONFIG_X86_32 @@ -329,6 +331,9 @@ notrace static void __cpuinit start_secondary(void *unused) /* enable local interrupts */ local_irq_enable(); + /* to prevent fake stack check failure in clock setup */ + boot_init_stack_canary(); + x86_cpuinit.setup_percpu_clockev(); wmb(); diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c index ab38ce0984f..e680ea52db9 100644 --- a/arch/x86/kernel/visws_quirks.c +++ b/arch/x86/kernel/visws_quirks.c @@ -49,11 +49,6 @@ extern int no_broadcast; char visws_board_type = -1; char visws_board_rev = -1; -int is_visws_box(void) -{ - return visws_board_type >= 0; -} - static void __init visws_time_init(void) { printk(KERN_INFO "Starting Cobalt Timer system clock\n"); @@ -242,6 +237,8 @@ void __init visws_early_detect(void) x86_init.irqs.pre_vector_init = visws_pre_intr_init; x86_init.irqs.trap_init = visws_trap_init; x86_init.timers.timer_init = visws_time_init; + x86_init.pci.init = pci_visws_init; + x86_init.pci.init_irq = x86_init_noop; /* * Install reboot quirks: @@ -508,7 +505,7 @@ static struct irq_chip cobalt_irq_type = { */ static unsigned int startup_piix4_master_irq(unsigned int irq) { - init_8259A(0); + legacy_pic->init(0); return startup_cobalt_irq(irq); } @@ -532,9 +529,6 @@ static struct irq_chip piix4_master_irq_type = { static struct irq_chip piix4_virtual_irq_type = { .name = "PIIX4-virtual", - .shutdown = disable_8259A_irq, - .enable = enable_8259A_irq, - .disable = disable_8259A_irq, }; @@ -609,7 +603,7 @@ static irqreturn_t piix4_master_intr(int irq, void *dev_id) handle_IRQ_event(realirq, desc->action); if (!(desc->status & IRQ_DISABLED)) - enable_8259A_irq(realirq); + legacy_pic->chip->unmask(realirq); return IRQ_HANDLED; @@ -628,6 +622,12 @@ static struct irqaction cascade_action = { .name = "cascade", }; +static inline void set_piix4_virtual_irq_type(void) +{ + piix4_virtual_irq_type.shutdown = i8259A_chip.mask; + piix4_virtual_irq_type.enable = i8259A_chip.unmask; + piix4_virtual_irq_type.disable = i8259A_chip.mask; +} void init_VISWS_APIC_irqs(void) { @@ -653,6 +653,7 @@ void init_VISWS_APIC_irqs(void) desc->chip = &piix4_master_irq_type; } else if (i < CO_IRQ_APIC0) { + set_piix4_virtual_irq_type(); desc->chip = &piix4_virtual_irq_type; } else if (IS_CO_APIC(i)) { diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index ee5746c9462..61a1e8c7e19 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -4,9 +4,11 @@ * For licencing details see kernel-base/COPYING */ #include <linux/init.h> +#include <linux/ioport.h> #include <asm/bios_ebda.h> #include <asm/paravirt.h> +#include <asm/pci_x86.h> #include <asm/mpspec.h> #include <asm/setup.h> #include <asm/apic.h> @@ -70,6 +72,12 @@ struct x86_init_ops x86_init __initdata = { .iommu = { .iommu_init = iommu_init_noop, }, + + .pci = { + .init = x86_default_pci_init, + .init_irq = x86_default_pci_init_irq, + .fixup_irqs = x86_default_pci_fixup_irqs, + }, }; struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = { diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index 0b7d3e9593e..b110d97fb92 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -13,6 +13,8 @@ obj-$(CONFIG_X86_VISWS) += visws.o obj-$(CONFIG_X86_NUMAQ) += numaq_32.o +obj-$(CONFIG_X86_MRST) += mrst.o + obj-y += common.o early.o obj-y += amd_bus.o bus_numa.o diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 5f11ff6f538..6e22454bfaa 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -298,17 +298,14 @@ int __init pci_acpi_init(void) { struct pci_dev *dev = NULL; - if (pcibios_scanned) - return 0; - if (acpi_noirq) - return 0; + return -ENODEV; printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n"); acpi_irq_penalty_init(); - pcibios_scanned++; pcibios_enable_irq = acpi_pci_irq_enable; pcibios_disable_irq = acpi_pci_irq_disable; + x86_init.pci.init_irq = x86_init_noop; if (pci_routeirq) { /* diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 3736176acaa..294e10cb11e 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -72,12 +72,6 @@ struct pci_ops pci_root_ops = { }; /* - * legacy, numa, and acpi all want to call pcibios_scan_root - * from their initcalls. This flag prevents that. - */ -int pcibios_scanned; - -/* * This interrupt-safe spinlock protects all accesses to PCI * configuration space. */ diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index 25a1f8efed4..adb62aaa7ec 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c @@ -1,6 +1,7 @@ #include <linux/pci.h> #include <linux/init.h> #include <asm/pci_x86.h> +#include <asm/x86_init.h> /* arch_initcall has too random ordering, so call the initializers in the right sequence from here. */ @@ -15,10 +16,9 @@ static __init int pci_arch_init(void) if (!(pci_probe & PCI_PROBE_NOEARLY)) pci_mmcfg_early_init(); -#ifdef CONFIG_PCI_OLPC - if (!pci_olpc_init()) - return 0; /* skip additional checks if it's an XO */ -#endif + if (x86_init.pci.arch_init && !x86_init.pci.arch_init()) + return 0; + #ifdef CONFIG_PCI_BIOS pci_pcbios_init(); #endif diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index b02f6d8ac92..8b107521d24 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -53,7 +53,7 @@ struct irq_router_handler { int (*probe)(struct irq_router *r, struct pci_dev *router, u16 device); }; -int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL; +int (*pcibios_enable_irq)(struct pci_dev *dev) = pirq_enable_irq; void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL; /* @@ -1018,7 +1018,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 1; } -static void __init pcibios_fixup_irqs(void) +void __init pcibios_fixup_irqs(void) { struct pci_dev *dev = NULL; u8 pin; @@ -1112,12 +1112,12 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = { { } }; -int __init pcibios_irq_init(void) +void __init pcibios_irq_init(void) { DBG(KERN_DEBUG "PCI: IRQ init\n"); - if (pcibios_enable_irq || raw_pci_ops == NULL) - return 0; + if (raw_pci_ops == NULL) + return; dmi_check_system(pciirq_dmi_table); @@ -1144,9 +1144,7 @@ int __init pcibios_irq_init(void) pirq_table = NULL; } - pcibios_enable_irq = pirq_enable_irq; - - pcibios_fixup_irqs(); + x86_init.pci.fixup_irqs(); if (io_apic_assign_pci_irqs && pci_routeirq) { struct pci_dev *dev = NULL; @@ -1159,8 +1157,6 @@ int __init pcibios_irq_init(void) for_each_pci_dev(dev) pirq_enable_irq(dev); } - - return 0; } static void pirq_penalize_isa_irq(int irq, int active) diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c index 4061bb0f267..0db5eaf5456 100644 --- a/arch/x86/pci/legacy.c +++ b/arch/x86/pci/legacy.c @@ -35,16 +35,13 @@ static void __devinit pcibios_fixup_peer_bridges(void) } } -static int __init pci_legacy_init(void) +int __init pci_legacy_init(void) { if (!raw_pci_ops) { printk("PCI: System does not support PCI\n"); return 0; } - if (pcibios_scanned++) - return 0; - printk("PCI: Probing PCI hardware\n"); pci_root_bus = pcibios_scan_root(0); if (pci_root_bus) @@ -55,18 +52,15 @@ static int __init pci_legacy_init(void) int __init pci_subsys_init(void) { -#ifdef CONFIG_X86_NUMAQ - pci_numaq_init(); -#endif -#ifdef CONFIG_ACPI - pci_acpi_init(); -#endif -#ifdef CONFIG_X86_VISWS - pci_visws_init(); -#endif - pci_legacy_init(); + /* + * The init function returns an non zero value when + * pci_legacy_init should be invoked. + */ + if (x86_init.pci.init()) + pci_legacy_init(); + pcibios_fixup_peer_bridges(); - pcibios_irq_init(); + x86_init.pci.init_irq(); pcibios_init(); return 0; diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c new file mode 100644 index 00000000000..8bf2fcb88d0 --- /dev/null +++ b/arch/x86/pci/mrst.c @@ -0,0 +1,262 @@ +/* + * Moorestown PCI support + * Copyright (c) 2008 Intel Corporation + * Jesse Barnes <jesse.barnes@intel.com> + * + * Moorestown has an interesting PCI implementation: + * - configuration space is memory mapped (as defined by MCFG) + * - Lincroft devices also have a real, type 1 configuration space + * - Early Lincroft silicon has a type 1 access bug that will cause + * a hang if non-existent devices are accessed + * - some devices have the "fixed BAR" capability, which means + * they can't be relocated or modified; check for that during + * BAR sizing + * + * So, we use the MCFG space for all reads and writes, but also send + * Lincroft writes to type 1 space. But only read/write if the device + * actually exists, otherwise return all 1s for reads and bit bucket + * the writes. + */ + +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/dmi.h> + +#include <asm/acpi.h> +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/smp.h> +#include <asm/pci_x86.h> +#include <asm/hw_irq.h> +#include <asm/io_apic.h> + +#define PCIE_CAP_OFFSET 0x100 + +/* Fixed BAR fields */ +#define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */ +#define PCI_FIXED_BAR_0_SIZE 0x04 +#define PCI_FIXED_BAR_1_SIZE 0x08 +#define PCI_FIXED_BAR_2_SIZE 0x0c +#define PCI_FIXED_BAR_3_SIZE 0x10 +#define PCI_FIXED_BAR_4_SIZE 0x14 +#define PCI_FIXED_BAR_5_SIZE 0x1c + +/** + * fixed_bar_cap - return the offset of the fixed BAR cap if found + * @bus: PCI bus + * @devfn: device in question + * + * Look for the fixed BAR cap on @bus and @devfn, returning its offset + * if found or 0 otherwise. + */ +static int fixed_bar_cap(struct pci_bus *bus, unsigned int devfn) +{ + int pos; + u32 pcie_cap = 0, cap_data; + + pos = PCIE_CAP_OFFSET; + + if (!raw_pci_ext_ops) + return 0; + + while (pos) { + if (raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, + devfn, pos, 4, &pcie_cap)) + return 0; + + if (pcie_cap == 0xffffffff) + return 0; + + if (PCI_EXT_CAP_ID(pcie_cap) == PCI_EXT_CAP_ID_VNDR) { + raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, + devfn, pos + 4, 4, &cap_data); + if ((cap_data & 0xffff) == PCIE_VNDR_CAP_ID_FIXED_BAR) + return pos; + } + + pos = pcie_cap >> 20; + } + + return 0; +} + +static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, + int reg, int len, u32 val, int offset) +{ + u32 size; + unsigned int domain, busnum; + int bar = (reg - PCI_BASE_ADDRESS_0) >> 2; + + domain = pci_domain_nr(bus); + busnum = bus->number; + + if (val == ~0 && len == 4) { + unsigned long decode; + + raw_pci_ext_ops->read(domain, busnum, devfn, + offset + 8 + (bar * 4), 4, &size); + + /* Turn the size into a decode pattern for the sizing code */ + if (size) { + decode = size - 1; + decode |= decode >> 1; + decode |= decode >> 2; + decode |= decode >> 4; + decode |= decode >> 8; + decode |= decode >> 16; + decode++; + decode = ~(decode - 1); + } else { + decode = ~0; + } + + /* + * If val is all ones, the core code is trying to size the reg, + * so update the mmconfig space with the real size. + * + * Note: this assumes the fixed size we got is a power of two. + */ + return raw_pci_ext_ops->write(domain, busnum, devfn, reg, 4, + decode); + } + + /* This is some other kind of BAR write, so just do it. */ + return raw_pci_ext_ops->write(domain, busnum, devfn, reg, len, val); +} + +/** + * type1_access_ok - check whether to use type 1 + * @bus: bus number + * @devfn: device & function in question + * + * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at + * all, the we can go ahead with any reads & writes. If it's on a Lincroft, + * but doesn't exist, avoid the access altogether to keep the chip from + * hanging. + */ +static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) +{ + /* This is a workaround for A0 LNC bug where PCI status register does + * not have new CAP bit set. can not be written by SW either. + * + * PCI header type in real LNC indicates a single function device, this + * will prevent probing other devices under the same function in PCI + * shim. Therefore, use the header type in shim instead. + */ + if (reg >= 0x100 || reg == PCI_STATUS || reg == PCI_HEADER_TYPE) + return 0; + if (bus == 0 && (devfn == PCI_DEVFN(2, 0) || devfn == PCI_DEVFN(0, 0))) + return 1; + return 0; /* langwell on others */ +} + +static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + if (type1_access_ok(bus->number, devfn, where)) + return pci_direct_conf1.read(pci_domain_nr(bus), bus->number, + devfn, where, size, value); + return raw_pci_ext_ops->read(pci_domain_nr(bus), bus->number, + devfn, where, size, value); +} + +static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 value) +{ + int offset; + + /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read + * to ROM BAR return 0 then being ignored. + */ + if (where == PCI_ROM_ADDRESS) + return 0; + + /* + * Devices with fixed BARs need special handling: + * - BAR sizing code will save, write ~0, read size, restore + * - so writes to fixed BARs need special handling + * - other writes to fixed BAR devices should go through mmconfig + */ + offset = fixed_bar_cap(bus, devfn); + if (offset && + (where >= PCI_BASE_ADDRESS_0 && where <= PCI_BASE_ADDRESS_5)) { + return pci_device_update_fixed(bus, devfn, where, size, value, + offset); + } + + /* + * On Moorestown update both real & mmconfig space + * Note: early Lincroft silicon can't handle type 1 accesses to + * non-existent devices, so just eat the write in that case. + */ + if (type1_access_ok(bus->number, devfn, where)) + return pci_direct_conf1.write(pci_domain_nr(bus), bus->number, + devfn, where, size, value); + return raw_pci_ext_ops->write(pci_domain_nr(bus), bus->number, devfn, + where, size, value); +} + +static int mrst_pci_irq_enable(struct pci_dev *dev) +{ + u8 pin; + struct io_apic_irq_attr irq_attr; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + + /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to + * IOAPIC RTE entries, so we just enable RTE for the device. + */ + irq_attr.ioapic = mp_find_ioapic(dev->irq); + irq_attr.ioapic_pin = dev->irq; + irq_attr.trigger = 1; /* level */ + irq_attr.polarity = 1; /* active low */ + io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr); + + return 0; +} + +struct pci_ops pci_mrst_ops = { + .read = pci_read, + .write = pci_write, +}; + +/** + * pci_mrst_init - installs pci_mrst_ops + * + * Moorestown has an interesting PCI implementation (see above). + * Called when the early platform detection installs it. + */ +int __init pci_mrst_init(void) +{ + printk(KERN_INFO "Moorestown platform detected, using MRST PCI ops\n"); + pci_mmcfg_late_init(); + pcibios_enable_irq = mrst_pci_irq_enable; + pci_root_ops = pci_mrst_ops; + /* Continue with standard init */ + return 1; +} + +/* + * Langwell devices reside at fixed offsets, don't try to move them. + */ +static void __devinit pci_fixed_bar_fixup(struct pci_dev *dev) +{ + unsigned long offset; + u32 size; + int i; + + /* Fixup the BAR sizes for fixed BAR devices and make them unmoveable */ + offset = fixed_bar_cap(dev->bus, dev->devfn); + if (!offset || PCI_DEVFN(2, 0) == dev->devfn || + PCI_DEVFN(2, 2) == dev->devfn) + return; + + for (i = 0; i < PCI_ROM_RESOURCE; i++) { + pci_read_config_dword(dev, offset + 8 + (i * 4), &size); + dev->resource[i].end = dev->resource[i].start + size - 1; + dev->resource[i].flags |= IORESOURCE_PCI_FIXED; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixed_bar_fixup); diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c index 8884a1c1ada..8223738ad80 100644 --- a/arch/x86/pci/numaq_32.c +++ b/arch/x86/pci/numaq_32.c @@ -148,14 +148,8 @@ int __init pci_numaq_init(void) { int quad; - if (!found_numaq) - return 0; - raw_pci_ops = &pci_direct_conf1_mq; - if (pcibios_scanned++) - return 0; - pci_root_bus = pcibios_scan_root(0); if (pci_root_bus) pci_bus_add_devices(pci_root_bus); diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c index b889d824f7c..b34815408f5 100644 --- a/arch/x86/pci/olpc.c +++ b/arch/x86/pci/olpc.c @@ -304,9 +304,6 @@ static struct pci_raw_ops pci_olpc_conf = { int __init pci_olpc_init(void) { - if (!machine_is_olpc() || olpc_has_vsa()) - return -ENODEV; - printk(KERN_INFO "PCI: Using configuration type OLPC\n"); raw_pci_ops = &pci_olpc_conf; is_lx = is_geode_lx(); diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c index bcead7a4687..03008f72eb0 100644 --- a/arch/x86/pci/visws.c +++ b/arch/x86/pci/visws.c @@ -69,9 +69,6 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) int __init pci_visws_init(void) { - if (!is_visws_box()) - return -1; - pcibios_enable_irq = &pci_visws_enable_irq; pcibios_disable_irq = &pci_visws_disable_irq; @@ -90,5 +87,6 @@ int __init pci_visws_init(void) pci_scan_bus_with_sysdata(pci_bus1); pci_fixup_irqs(pci_common_swizzle, visws_map_irq); pcibios_resource_survey(); - return 0; + /* Request bus scan */ + return 1; } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5b548aee9cb..77b493b3d97 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -303,6 +303,49 @@ int pci_find_ext_capability(struct pci_dev *dev, int cap) } EXPORT_SYMBOL_GPL(pci_find_ext_capability); +/** + * pci_bus_find_ext_capability - find an extended capability + * @bus: the PCI bus to query + * @devfn: PCI device to query + * @cap: capability code + * + * Like pci_find_ext_capability() but works for pci devices that do not have a + * pci_dev structure set up yet. + * + * Returns the address of the requested capability structure within the + * device's PCI configuration space or 0 in case the device does not + * support it. + */ +int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, + int cap) +{ + u32 header; + int ttl; + int pos = PCI_CFG_SPACE_SIZE; + + /* minimum 8 bytes per capability */ + ttl = (PCI_CFG_SPACE_EXP_SIZE - PCI_CFG_SPACE_SIZE) / 8; + + if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) + return 0; + if (header == 0xffffffff || header == 0) + return 0; + + while (ttl-- > 0) { + if (PCI_EXT_CAP_ID(header) == cap) + return pos; + + pos = PCI_EXT_CAP_NEXT(header); + if (pos < PCI_CFG_SPACE_SIZE) + break; + + if (!pci_bus_read_config_dword(bus, devfn, pos, &header)) + break; + } + + return 0; +} + static int __pci_find_next_ht_cap(struct pci_dev *dev, int pos, int ht_cap) { int rc, ttl = PCI_FIND_CAP_TTL; diff --git a/include/linux/pci.h b/include/linux/pci.h index ec95ebe629f..cd5809a5963 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -678,6 +678,8 @@ enum pci_lost_interrupt_reason pci_lost_interrupt(struct pci_dev *dev); int pci_find_capability(struct pci_dev *dev, int cap); int pci_find_next_capability(struct pci_dev *dev, u8 pos, int cap); int pci_find_ext_capability(struct pci_dev *dev, int cap); +int pci_bus_find_ext_capability(struct pci_bus *bus, unsigned int devfn, + int cap); int pci_find_ht_capability(struct pci_dev *dev, int ht_cap); int pci_find_next_ht_capability(struct pci_dev *dev, int pos, int ht_cap); struct pci_bus *pci_find_next_bus(const struct pci_bus *from); diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 9f2ad0aa3c3..c8f302991b6 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -507,6 +507,7 @@ #define PCI_EXT_CAP_ID_VC 2 #define PCI_EXT_CAP_ID_DSN 3 #define PCI_EXT_CAP_ID_PWR 4 +#define PCI_EXT_CAP_ID_VNDR 11 #define PCI_EXT_CAP_ID_ACS 13 #define PCI_EXT_CAP_ID_ARI 14 #define PCI_EXT_CAP_ID_ATS 15 |