diff options
32 files changed, 1156 insertions, 108 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-opal.txt b/Documentation/devicetree/bindings/i2c/i2c-opal.txt new file mode 100644 index 00000000000..12bc61465ee --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-opal.txt @@ -0,0 +1,37 @@ +Device-tree bindings for I2C OPAL driver +---------------------------------------- + +Most of the device node and properties layout is specific to the firmware and +used by the firmware itself for configuring the port. From the linux +perspective, the properties of use are "ibm,port-name" and "ibm,opal-id". + +Required properties: + +- reg: Port-id within a given master +- compatible: must be "ibm,opal-i2c" +- ibm,opal-id: Refers to a specific bus and used to identify it when calling + the relevant OPAL functions. +- bus-frequency: Operating frequency of the i2c bus (in HZ). Informational for + linux, used by the FW though. + +Optional properties: +- ibm,port-name: Firmware provides this name that uniquely identifies the i2c + port. + +The node contains a number of other properties that are used by the FW itself +and depend on the specific hardware implementation. The example below depicts +a P8 on-chip bus. + +Example: + +i2c-bus@0 { + reg = <0x0>; + bus-frequency = <0x61a80>; + compatible = "ibm,power8-i2c-port", "ibm,opal-i2c"; + ibm,opal-id = <0x1>; + ibm,port-name = "p8_00000000_e1p0"; + #address-cells = <0x1>; + phandle = <0x10000006>; + #size-cells = <0x0>; + linux,phandle = <0x10000006>; +}; diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h new file mode 100644 index 00000000000..d2f99ca1e3a --- /dev/null +++ b/arch/powerpc/include/asm/cpuidle.h @@ -0,0 +1,20 @@ +#ifndef _ASM_POWERPC_CPUIDLE_H +#define _ASM_POWERPC_CPUIDLE_H + +#ifdef CONFIG_PPC_POWERNV +/* Used in powernv idle state management */ +#define PNV_THREAD_RUNNING 0 +#define PNV_THREAD_NAP 1 +#define PNV_THREAD_SLEEP 2 +#define PNV_THREAD_WINKLE 3 +#define PNV_CORE_IDLE_LOCK_BIT 0x100 +#define PNV_CORE_IDLE_THREAD_BITS 0x0FF + +#ifndef __ASSEMBLY__ +extern u32 pnv_fastsleep_workaround_at_entry[]; +extern u32 pnv_fastsleep_workaround_at_exit[]; +#endif + +#endif + +#endif diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h index 5cd8d2fddba..eb95b675109 100644 --- a/arch/powerpc/include/asm/opal.h +++ b/arch/powerpc/include/asm/opal.h @@ -56,6 +56,14 @@ struct opal_sg_list { #define OPAL_HARDWARE_FROZEN -13 #define OPAL_WRONG_STATE -14 #define OPAL_ASYNC_COMPLETION -15 +#define OPAL_I2C_TIMEOUT -17 +#define OPAL_I2C_INVALID_CMD -18 +#define OPAL_I2C_LBUS_PARITY -19 +#define OPAL_I2C_BKEND_OVERRUN -20 +#define OPAL_I2C_BKEND_ACCESS -21 +#define OPAL_I2C_ARBT_LOST -22 +#define OPAL_I2C_NACK_RCVD -23 +#define OPAL_I2C_STOP_ERR -24 /* API Tokens (in r0) */ #define OPAL_INVALID_CALL -1 @@ -152,12 +160,25 @@ struct opal_sg_list { #define OPAL_PCI_ERR_INJECT 96 #define OPAL_PCI_EEH_FREEZE_SET 97 #define OPAL_HANDLE_HMI 98 +#define OPAL_CONFIG_CPU_IDLE_STATE 99 +#define OPAL_SLW_SET_REG 100 #define OPAL_REGISTER_DUMP_REGION 101 #define OPAL_UNREGISTER_DUMP_REGION 102 #define OPAL_WRITE_TPO 103 #define OPAL_READ_TPO 104 #define OPAL_IPMI_SEND 107 #define OPAL_IPMI_RECV 108 +#define OPAL_I2C_REQUEST 109 + +/* Device tree flags */ + +/* Flags set in power-mgmt nodes in device tree if + * respective idle states are supported in the platform. + */ +#define OPAL_PM_NAP_ENABLED 0x00010000 +#define OPAL_PM_SLEEP_ENABLED 0x00020000 +#define OPAL_PM_WINKLE_ENABLED 0x00040000 +#define OPAL_PM_SLEEP_ENABLED_ER1 0x00080000 #ifndef __ASSEMBLY__ @@ -712,6 +733,24 @@ typedef struct oppanel_line { uint64_t line_len; } oppanel_line_t; +/* OPAL I2C request */ +struct opal_i2c_request { + uint8_t type; +#define OPAL_I2C_RAW_READ 0 +#define OPAL_I2C_RAW_WRITE 1 +#define OPAL_I2C_SM_READ 2 +#define OPAL_I2C_SM_WRITE 3 + uint8_t flags; +#define OPAL_I2C_ADDR_10 0x01 /* Not supported yet */ + uint8_t subaddr_sz; /* Max 4 */ + uint8_t reserved; + __be16 addr; /* 7 or 10 bit address */ + __be16 reserved2; + __be32 subaddr; /* Sub-address if any */ + __be32 size; /* Data size */ + __be64 buffer_ra; /* Buffer real address */ +}; + /* /sys/firmware/opal */ extern struct kobject *opal_kobj; @@ -876,11 +915,14 @@ int64_t opal_sensor_read(uint32_t sensor_hndl, int token, __be32 *sensor_data); int64_t opal_handle_hmi(void); int64_t opal_register_dump_region(uint32_t id, uint64_t start, uint64_t end); int64_t opal_unregister_dump_region(uint32_t id); +int64_t opal_slw_set_reg(uint64_t cpu_pir, uint64_t sprn, uint64_t val); int64_t opal_pci_set_phb_cxl_mode(uint64_t phb_id, uint64_t mode, uint64_t pe_number); int64_t opal_ipmi_send(uint64_t interface, struct opal_ipmi_msg *msg, uint64_t msg_len); int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg, uint64_t *msg_len); +int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id, + struct opal_i2c_request *oreq); /* Internal functions */ extern int early_init_dt_scan_opal(unsigned long node, const char *uname, diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 24a386cbb92..e5f22c6c4bf 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -152,6 +152,16 @@ struct paca_struct { u64 tm_scratch; /* TM scratch area for reclaim */ #endif +#ifdef CONFIG_PPC_POWERNV + /* Per-core mask tracking idle threads and a lock bit-[L][TTTTTTTT] */ + u32 *core_idle_state_ptr; + u8 thread_idle_state; /* PNV_THREAD_RUNNING/NAP/SLEEP */ + /* Mask to indicate thread id in core */ + u8 thread_mask; + /* Mask to denote subcore sibling threads */ + u8 subcore_sibling_mask; +#endif + #ifdef CONFIG_PPC_BOOK3S_64 /* Exclusive emergency stack pointer for machine check exception. */ void *mc_emergency_sp; diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 1a5287759fc..03cd858a401 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -194,6 +194,7 @@ #define PPC_INST_NAP 0x4c000364 #define PPC_INST_SLEEP 0x4c0003a4 +#define PPC_INST_WINKLE 0x4c0003e4 /* A2 specific instructions */ #define PPC_INST_ERATWE 0x7c0001a6 @@ -375,6 +376,7 @@ #define PPC_NAP stringify_in_c(.long PPC_INST_NAP) #define PPC_SLEEP stringify_in_c(.long PPC_INST_SLEEP) +#define PPC_WINKLE stringify_in_c(.long PPC_INST_WINKLE) /* BHRB instructions */ #define PPC_CLRBHRB stringify_in_c(.long PPC_INST_CLRBHRB) diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 29c3798cf80..bf117d8fb45 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -452,7 +452,8 @@ enum idle_boot_override {IDLE_NO_OVERRIDE = 0, IDLE_POWERSAVE_OFF}; extern int powersave_nap; /* set if nap mode can be used in idle loop */ extern unsigned long power7_nap(int check_irq); -extern void power7_sleep(void); +extern unsigned long power7_sleep(void); +extern unsigned long power7_winkle(void); extern void flush_instruction_cache(void); extern void hard_reset_now(void); extern void poweroff_now(void); diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index c998279bd85..1c874fb533b 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -118,8 +118,10 @@ #define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV) #ifdef __BIG_ENDIAN__ #define MSR_ __MSR +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV) #else #define MSR_ (__MSR | MSR_LE) +#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE) #endif #define MSR_KERNEL (MSR_ | MSR_64BIT) #define MSR_USER32 (MSR_ | MSR_PR | MSR_EE) @@ -371,6 +373,7 @@ #define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */ #define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */ #define SPRN_PPR 0x380 /* SMT Thread status Register */ +#define SPRN_TSCR 0x399 /* Thread Switch Control Register */ #define SPRN_DEC 0x016 /* Decrement Register */ #define SPRN_DER 0x095 /* Debug Enable Regsiter */ @@ -728,6 +731,7 @@ #define SPRN_BESCR 806 /* Branch event status and control register */ #define BESCR_GE 0x8000000000000000ULL /* Global Enable */ #define SPRN_WORT 895 /* Workload optimization register - thread */ +#define SPRN_WORC 863 /* Workload optimization register - core */ #define SPRN_PMC1 787 #define SPRN_PMC2 788 diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h index 6240698fee9..ff21b7a2f0c 100644 --- a/arch/powerpc/include/asm/syscall.h +++ b/arch/powerpc/include/asm/syscall.h @@ -90,6 +90,10 @@ static inline void syscall_set_arguments(struct task_struct *task, static inline int syscall_get_arch(void) { - return is_32bit_task() ? AUDIT_ARCH_PPC : AUDIT_ARCH_PPC64; + int arch = is_32bit_task() ? AUDIT_ARCH_PPC : AUDIT_ARCH_PPC64; +#ifdef __LITTLE_ENDIAN__ + arch |= __AUDIT_ARCH_LE; +#endif + return arch; } #endif /* _ASM_SYSCALL_H */ diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h index 9485b43a7c0..a0c071d24e0 100644 --- a/arch/powerpc/include/asm/uaccess.h +++ b/arch/powerpc/include/asm/uaccess.h @@ -284,7 +284,7 @@ do { \ if (!is_kernel_addr((unsigned long)__gu_addr)) \ might_fault(); \ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ + (x) = (__force __typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) #endif /* __powerpc64__ */ @@ -297,7 +297,7 @@ do { \ might_fault(); \ if (access_ok(VERIFY_READ, __gu_addr, (size))) \ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ + (x) = (__force __typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) @@ -308,7 +308,7 @@ do { \ const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ __chk_user_ptr(ptr); \ __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ + (x) = (__force __typeof__(*(ptr)))__gu_val; \ __gu_err; \ }) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 24d78e1871c..e624f964635 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -726,5 +726,16 @@ int main(void) arch.timing_last_enter.tv32.tbl)); #endif +#ifdef CONFIG_PPC_POWERNV + DEFINE(PACA_CORE_IDLE_STATE_PTR, + offsetof(struct paca_struct, core_idle_state_ptr)); + DEFINE(PACA_THREAD_IDLE_STATE, + offsetof(struct paca_struct, thread_idle_state)); + DEFINE(PACA_THREAD_MASK, + offsetof(struct paca_struct, thread_mask)); + DEFINE(PACA_SUBCORE_SIBLING_MASK, + offsetof(struct paca_struct, subcore_sibling_mask)); +#endif + return 0; } diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index db08382e19f..c2df8150bd7 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -15,6 +15,7 @@ #include <asm/hw_irq.h> #include <asm/exception-64s.h> #include <asm/ptrace.h> +#include <asm/cpuidle.h> /* * We layout physical memory as follows: @@ -101,23 +102,34 @@ system_reset_pSeries: #ifdef CONFIG_PPC_P7_NAP BEGIN_FTR_SECTION /* Running native on arch 2.06 or later, check if we are - * waking up from nap. We only handle no state loss and - * supervisor state loss. We do -not- handle hypervisor - * state loss at this time. + * waking up from nap/sleep/winkle. */ mfspr r13,SPRN_SRR1 rlwinm. r13,r13,47-31,30,31 beq 9f - /* waking up from powersave (nap) state */ - cmpwi cr1,r13,2 - /* Total loss of HV state is fatal, we could try to use the - * PIR to locate a PACA, then use an emergency stack etc... - * OPAL v3 based powernv platforms have new idle states - * which fall in this catagory. + cmpwi cr3,r13,2 + + /* + * Check if last bit of HSPGR0 is set. This indicates whether we are + * waking up from winkle. */ - bgt cr1,8f GET_PACA(r13) + clrldi r5,r13,63 + clrrdi r13,r13,1 + cmpwi cr4,r5,1 + mtspr SPRN_HSPRG0,r13 + + lbz r0,PACA_THREAD_IDLE_STATE(r13) + cmpwi cr2,r0,PNV_THREAD_NAP + bgt cr2,8f /* Either sleep or Winkle */ + + /* Waking up from nap should not cause hypervisor state loss */ + bgt cr3,. + + /* Waking up from nap */ + li r0,PNV_THREAD_RUNNING + stb r0,PACA_THREAD_IDLE_STATE(r13) /* Clear thread state */ #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE li r0,KVM_HWTHREAD_IN_KERNEL @@ -133,7 +145,7 @@ BEGIN_FTR_SECTION /* Return SRR1 from power7_nap() */ mfspr r3,SPRN_SRR1 - beq cr1,2f + beq cr3,2f b power7_wakeup_noloss 2: b power7_wakeup_loss @@ -1382,6 +1394,7 @@ machine_check_handle_early: MACHINE_CHECK_HANDLER_WINDUP GET_PACA(r13) ld r1,PACAR1(r13) + li r3,PNV_THREAD_NAP b power7_enter_nap_mode 4: #endif diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 18c0687e5ab..05adc8bbdef 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -18,9 +18,25 @@ #include <asm/hw_irq.h> #include <asm/kvm_book3s_asm.h> #include <asm/opal.h> +#include <asm/cpuidle.h> +#include <asm/mmu-hash64.h> #undef DEBUG +/* + * Use unused space in the interrupt stack to save and restore + * registers for winkle support. + */ +#define _SDR1 GPR3 +#define _RPR GPR4 +#define _SPURR GPR5 +#define _PURR GPR6 +#define _TSCR GPR7 +#define _DSCR GPR8 +#define _AMOR GPR9 +#define _WORT GPR10 +#define _WORC GPR11 + /* Idle state entry routines */ #define IDLE_STATE_ENTER_SEQ(IDLE_INST) \ @@ -37,8 +53,7 @@ /* * Pass requested state in r3: - * 0 - nap - * 1 - sleep + * r3 - PNV_THREAD_NAP/SLEEP/WINKLE * * To check IRQ_HAPPENED in r4 * 0 - don't check @@ -101,18 +116,105 @@ _GLOBAL(power7_powersave_common) std r9,_MSR(r1) std r1,PACAR1(r13) -_GLOBAL(power7_enter_nap_mode) + /* + * Go to real mode to do the nap, as required by the architecture. + * Also, we need to be in real mode before setting hwthread_state, + * because as soon as we do that, another thread can switch + * the MMU context to the guest. + */ + LOAD_REG_IMMEDIATE(r5, MSR_IDLE) + li r6, MSR_RI + andc r6, r9, r6 + LOAD_REG_ADDR(r7, power7_enter_nap_mode) + mtmsrd r6, 1 /* clear RI before setting SRR0/1 */ + mtspr SPRN_SRR0, r7 + mtspr SPRN_SRR1, r5 + rfid + + .globl power7_enter_nap_mode +power7_enter_nap_mode: #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE /* Tell KVM we're napping */ li r4,KVM_HWTHREAD_IN_NAP stb r4,HSTATE_HWTHREAD_STATE(r13) #endif - cmpwi cr0,r3,1 - beq 2f + stb r3,PACA_THREAD_IDLE_STATE(r13) + cmpwi cr3,r3,PNV_THREAD_SLEEP + bge cr3,2f IDLE_STATE_ENTER_SEQ(PPC_NAP) /* No return */ -2: IDLE_STATE_ENTER_SEQ(PPC_SLEEP) - /* No return */ +2: + /* Sleep or winkle */ + lbz r7,PACA_THREAD_MASK(r13) + ld r14,PACA_CORE_IDLE_STATE_PTR(r13) +lwarx_loop1: + lwarx r15,0,r14 + andc r15,r15,r7 /* Clear thread bit */ + + andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS + +/* + * If cr0 = 0, then current thread is the last thread of the core entering + * sleep. Last thread needs to execute the hardware bug workaround code if + * required by the platform. + * Make the workaround call unconditionally here. The below branch call is + * patched out when the idle states are discovered if the platform does not + * require it. + */ +.global pnv_fastsleep_workaround_at_entry +pnv_fastsleep_workaround_at_entry: + beq fastsleep_workaround_at_entry + + stwcx. r15,0,r14 + bne- lwarx_loop1 + isync + +common_enter: /* common code for all the threads entering sleep or winkle */ + bgt cr3,enter_winkle + IDLE_STATE_ENTER_SEQ(PPC_SLEEP) + +fastsleep_workaround_at_entry: + ori r15,r15,PNV_CORE_IDLE_LOCK_BIT + stwcx. r15,0,r14 + bne- lwarx_loop1 + isync + + /* Fast sleep workaround */ + li r3,1 + li r4,1 + li r0,OPAL_CONFIG_CPU_IDLE_STATE + bl opal_call_realmode + + /* Clear Lock bit */ + li r0,0 + lwsync + stw r0,0(r14) + b common_enter + +enter_winkle: + /* + * Note all register i.e per-core, per-subcore or per-thread is saved + * here since any thread in the core might wake up first + */ + mfspr r3,SPRN_SDR1 + std r3,_SDR1(r1) + mfspr r3,SPRN_RPR + std r3,_RPR(r1) + mfspr r3,SPRN_SPURR + std r3,_SPURR(r1) + mfspr r3,SPRN_PURR + std r3,_PURR(r1) + mfspr r3,SPRN_TSCR + std r3,_TSCR(r1) + mfspr r3,SPRN_DSCR + std r3,_DSCR(r1) + mfspr r3,SPRN_AMOR + std r3,_AMOR(r1) + mfspr r3,SPRN_WORT + std r3,_WORT(r1) + mfspr r3,SPRN_WORC + std r3,_WORC(r1) + IDLE_STATE_ENTER_SEQ(PPC_WINKLE) _GLOBAL(power7_idle) /* Now check if user or arch enabled NAP mode */ @@ -125,48 +227,21 @@ _GLOBAL(power7_idle) _GLOBAL(power7_nap) mr r4,r3 - li r3,0 + li r3,PNV_THREAD_NAP b power7_powersave_common /* No return */ _GLOBAL(power7_sleep) - li r3,1 + li r3,PNV_THREAD_SLEEP li r4,1 b power7_powersave_common /* No return */ -/* - * Make opal call in realmode. This is a generic function to be called - * from realmode from reset vector. It handles endianess. - * - * r13 - paca pointer - * r1 - stack pointer - * r3 - opal token - */ -opal_call_realmode: - mflr r12 - std r12,_LINK(r1) - ld r2,PACATOC(r13) - /* Set opal return address */ - LOAD_REG_ADDR(r0,return_from_opal_call) - mtlr r0 - /* Handle endian-ness */ - li r0,MSR_LE - mfmsr r12 - andc r12,r12,r0 - mtspr SPRN_HSRR1,r12 - mr r0,r3 /* Move opal token to r0 */ - LOAD_REG_ADDR(r11,opal) - ld r12,8(r11) - ld r2,0(r11) - mtspr SPRN_HSRR0,r12 - hrfid - -return_from_opal_call: - FIXUP_ENDIAN - ld r0,_LINK(r1) - mtlr r0 - blr +_GLOBAL(power7_winkle) + li r3,3 + li r4,1 + b power7_powersave_common + /* No return */ #define CHECK_HMI_INTERRUPT \ mfspr r0,SPRN_SRR1; \ @@ -181,7 +256,7 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ ld r2,PACATOC(r13); \ ld r1,PACAR1(r13); \ std r3,ORIG_GPR3(r1); /* Save original r3 */ \ - li r3,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \ + li r0,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \ bl opal_call_realmode; \ ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \ 20: nop; @@ -190,16 +265,190 @@ ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \ _GLOBAL(power7_wakeup_tb_loss) ld r2,PACATOC(r13); ld r1,PACAR1(r13) + /* + * Before entering any idle state, the NVGPRs are saved in the stack + * and they are restored before switching to the process context. Hence + * until they are restored, they are free to be used. + * + * Save SRR1 in a NVGPR as it might be clobbered in opal_call_realmode + * (called in CHECK_HMI_INTERRUPT). SRR1 is required to determine the + * wakeup reason if we branch to kvm_start_guest. + */ + mfspr r16,SPRN_SRR1 BEGIN_FTR_SECTION CHECK_HMI_INTERRUPT END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) + + lbz r7,PACA_THREAD_MASK(r13) + ld r14,PACA_CORE_IDLE_STATE_PTR(r13) +lwarx_loop2: + lwarx r15,0,r14 + andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT + /* + * Lock bit is set in one of the 2 cases- + * a. In the sleep/winkle enter path, the last thread is executing + * fastsleep workaround code. + * b. In the wake up path, another thread is executing fastsleep + * workaround undo code or resyncing timebase or restoring context + * In either case loop until the lock bit is cleared. + */ + bne core_idle_lock_held + + cmpwi cr2,r15,0 + lbz r4,PACA_SUBCORE_SIBLING_MASK(r13) + and r4,r4,r15 + cmpwi cr1,r4,0 /* Check if first in subcore */ + + /* + * At this stage + * cr1 - 0b0100 if first thread to wakeup in subcore + * cr2 - 0b0100 if first thread to wakeup in core + * cr3- 0b0010 if waking up from sleep or winkle + * cr4 - 0b0100 if waking up from winkle + */ + + or r15,r15,r7 /* Set thread bit */ + + beq cr1,first_thread_in_subcore + + /* Not first thread in subcore to wake up */ + stwcx. r15,0,r14 + bne- lwarx_loop2 + isync + b common_exit + +core_idle_lock_held: + HMT_LOW +core_idle_lock_loop: + lwz r15,0(14) + andi. r9,r15,PNV_CORE_IDLE_LOCK_BIT + bne core_idle_lock_loop + HMT_MEDIUM + b lwarx_loop2 + +first_thread_in_subcore: + /* First thread in subcore to wakeup */ + ori r15,r15,PNV_CORE_IDLE_LOCK_BIT + stwcx. r15,0,r14 + bne- lwarx_loop2 + isync + + /* + * If waking up from sleep, subcore state is not lost. Hence + * skip subcore state restore + */ + bne cr4,subcore_state_restored + + /* Restore per-subcore state */ + ld r4,_SDR1(r1) + mtspr SPRN_SDR1,r4 + ld r4,_RPR(r1) + mtspr SPRN_RPR,r4 + ld r4,_AMOR(r1) + mtspr SPRN_AMOR,r4 + +subcore_state_restored: + /* + * Check if the thread is also the first thread in the core. If not, + * skip to clear_lock. + */ + bne cr2,clear_lock + +first_thread_in_core: + + /* + * First thread in the core waking up from fastsleep. It needs to + * call the fastsleep workaround code if the platform requires it. + * Call it unconditionally here. The below branch instruction will + * be patched out when the idle states are discovered if platform + * does not require workaround. + */ +.global pnv_fastsleep_workaround_at_exit +pnv_fastsleep_workaround_at_exit: + b fastsleep_workaround_at_exit + +timebase_resync: + /* Do timebase resync if we are waking up from sleep. Use cr3 value + * set in exceptions-64s.S */ + ble cr3,clear_lock /* Time base re-sync */ - li r3,OPAL_RESYNC_TIMEBASE + li r0,OPAL_RESYNC_TIMEBASE bl opal_call_realmode; - /* TODO: Check r3 for failure */ + /* + * If waking up from sleep, per core state is not lost, skip to + * clear_lock. + */ + bne cr4,clear_lock + + /* Restore per core state */ + ld r4,_TSCR(r1) + mtspr SPRN_TSCR,r4 + ld r4,_WORC(r1) + mtspr SPRN_WORC,r4 + +clear_lock: + andi. r15,r15,PNV_CORE_IDLE_THREAD_BITS + lwsync + stw r15,0(r14) + +common_exit: + /* + * Common to all threads. + * + * If waking up from sleep, hypervisor state is not lost. Hence + * skip hypervisor state restore. + */ + bne cr4,hypervisor_state_restored + + /* Waking up from winkle */ + + /* Restore per thread state */ + bl __restore_cpu_power8 + + /* Restore SLB from PACA */ + ld r8,PACA_SLBSHADOWPTR(r13) + + .rept SLB_NUM_BOLTED + li r3, SLBSHADOW_SAVEAREA + LDX_BE r5, r8, r3 + addi r3, r3, 8 + LDX_BE r6, r8, r3 + andis. r7,r5,SLB_ESID_V@h + beq 1f + slbmte r6,r5 +1: addi r8,r8,16 + .endr + + ld r4,_SPURR(r1) + mtspr SPRN_SPURR,r4 + ld r4,_PURR(r1) + mtspr SPRN_PURR,r4 + ld r4,_DSCR(r1) + mtspr SPRN_DSCR,r4 + ld r4,_WORT(r1) + mtspr SPRN_WORT,r4 + +hypervisor_state_restored: + + li r5,PNV_THREAD_RUNNING + stb r5,PACA_THREAD_IDLE_STATE(r13) + + mtspr SPRN_SRR1,r16 +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + li r0,KVM_HWTHREAD_IN_KERNEL + stb r0,HSTATE_HWTHREAD_STATE(r13) + /* Order setting hwthread_state vs. testing hwthread_req */ + sync + lbz r0,HSTATE_HWTHREAD_REQ(r13) + cmpwi r0,0 + beq 6f + b kvm_start_guest +6: +#endif + REST_NVGPRS(r1) REST_GPR(2, r1) ld r3,_CCR(r1) @@ -212,6 +461,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE) mtspr SPRN_SRR0,r5 rfid +fastsleep_workaround_at_exit: + li r3,1 + li r4,0 + li r0,OPAL_CONFIG_CPU_IDLE_STATE + bl opal_call_realmode + b timebase_resync + /* * R3 here contains the value that will be returned to the caller * of power7_nap. diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 8b2d2dc8ef1..8ec017cb444 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -700,7 +700,6 @@ void start_secondary(void *unused) smp_store_cpu_info(cpu); set_dec(tb_ticks_per_jiffy); preempt_disable(); - cpu_callin_map[cpu] = 1; if (smp_ops->setup_cpu) smp_ops->setup_cpu(cpu); @@ -739,6 +738,14 @@ void start_secondary(void *unused) notify_cpu_starting(cpu); set_cpu_online(cpu, true); + /* + * CPU must be marked active and online before we signal back to the + * master, because the scheduler needs to see the cpu_online and + * cpu_active bits set. + */ + smp_wmb(); + cpu_callin_map[cpu] = 1; + local_irq_enable(); cpu_startup_entry(CPUHP_ONLINE); diff --git a/arch/powerpc/perf/hv-24x7.c b/arch/powerpc/perf/hv-24x7.c index dba34088da2..f162d0b8eea 100644 --- a/arch/powerpc/perf/hv-24x7.c +++ b/arch/powerpc/perf/hv-24x7.c @@ -177,7 +177,7 @@ static ssize_t _name##_show(struct device *dev, \ } \ ret = sprintf(buf, _fmt, _expr); \ e_free: \ - kfree(page); \ + kmem_cache_free(hv_page_cache, page); \ return ret; \ } \ static DEVICE_ATTR_RO(_name) @@ -217,11 +217,14 @@ static bool is_physical_domain(int domain) domain == HV_24X7_PERF_DOMAIN_PHYSICAL_CORE; } +DEFINE_PER_CPU(char, hv_24x7_reqb[4096]) __aligned(4096); +DEFINE_PER_CPU(char, hv_24x7_resb[4096]) __aligned(4096); + static unsigned long single_24x7_request(u8 domain, u32 offset, u16 ix, u16 lpar, u64 *res, bool success_expected) { - unsigned long ret = -ENOMEM; + unsigned long ret; /* * request_buffer and result_buffer are not required to be 4k aligned, @@ -243,13 +246,11 @@ static unsigned long single_24x7_request(u8 domain, u32 offset, u16 ix, BUILD_BUG_ON(sizeof(*request_buffer) > 4096); BUILD_BUG_ON(sizeof(*result_buffer) > 4096); - request_buffer = kmem_cache_zalloc(hv_page_cache, GFP_USER); - if (!request_buffer) - goto out; + request_buffer = (void *)get_cpu_var(hv_24x7_reqb); + result_buffer = (void *)get_cpu_var(hv_24x7_resb); - result_buffer = kmem_cache_zalloc(hv_page_cache, GFP_USER); - if (!result_buffer) - goto out_free_request_buffer; + memset(request_buffer, 0, 4096); + memset(result_buffer, 0, 4096); *request_buffer = (struct reqb) { .buf = { @@ -278,15 +279,11 @@ static unsigned long single_24x7_request(u8 domain, u32 offset, u16 ix, domain, offset, ix, lpar, ret, ret, result_buffer->buf.detailed_rc, result_buffer->buf.failing_request_ix); - goto out_free_result_buffer; + goto out; } *res = be64_to_cpu(result_buffer->result); -out_free_result_buffer: - kfree(result_buffer); -out_free_request_buffer: - kfree(request_buffer); out: return ret; } diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 0a299be588a..54eca8b3b28 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -158,6 +158,43 @@ opal_tracepoint_return: blr #endif +/* + * Make opal call in realmode. This is a generic function to be called + * from realmode. It handles endianness. + * + * r13 - paca pointer + * r1 - stack pointer + * r0 - opal token + */ +_GLOBAL(opal_call_realmode) + mflr r12 + std r12,PPC_LR_STKOFF(r1) + ld r2,PACATOC(r13) + /* Set opal return address */ + LOAD_REG_ADDR(r12,return_from_opal_call) + mtlr r12 + + mfmsr r12 +#ifdef __LITTLE_ENDIAN__ + /* Handle endian-ness */ + li r11,MSR_LE + andc r12,r12,r11 +#endif + mtspr SPRN_HSRR1,r12 + LOAD_REG_ADDR(r11,opal) + ld r12,8(r11) + ld r2,0(r11) + mtspr SPRN_HSRR0,r12 + hrfid + +return_from_opal_call: +#ifdef __LITTLE_ENDIAN__ + FIXUP_ENDIAN +#endif + ld r12,PPC_LR_STKOFF(r1) + mtlr r12 + blr + OPAL_CALL(opal_invalid_call, OPAL_INVALID_CALL); OPAL_CALL(opal_console_write, OPAL_CONSOLE_WRITE); OPAL_CALL(opal_console_read, OPAL_CONSOLE_READ); @@ -247,6 +284,7 @@ OPAL_CALL(opal_sensor_read, OPAL_SENSOR_READ); OPAL_CALL(opal_get_param, OPAL_GET_PARAM); OPAL_CALL(opal_set_param, OPAL_SET_PARAM); OPAL_CALL(opal_handle_hmi, OPAL_HANDLE_HMI); +OPAL_CALL(opal_slw_set_reg, OPAL_SLW_SET_REG); OPAL_CALL(opal_register_dump_region, OPAL_REGISTER_DUMP_REGION); OPAL_CALL(opal_unregister_dump_region, OPAL_UNREGISTER_DUMP_REGION); OPAL_CALL(opal_pci_set_phb_cxl_mode, OPAL_PCI_SET_PHB_CXL_MODE); @@ -254,3 +292,4 @@ OPAL_CALL(opal_tpo_write, OPAL_WRITE_TPO); OPAL_CALL(opal_tpo_read, OPAL_READ_TPO); OPAL_CALL(opal_ipmi_send, OPAL_IPMI_SEND); OPAL_CALL(opal_ipmi_recv, OPAL_IPMI_RECV); +OPAL_CALL(opal_i2c_request, OPAL_I2C_REQUEST); diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index cb0b6de79cd..f10b9ec8c1f 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -9,8 +9,9 @@ * 2 of the License, or (at your option) any later version. */ -#undef DEBUG +#define pr_fmt(fmt) "opal: " fmt +#include <linux/printk.h> #include <linux/types.h> #include <linux/of.h> #include <linux/of_fdt.h> @@ -625,6 +626,39 @@ static int opal_sysfs_init(void) return 0; } +static ssize_t symbol_map_read(struct file *fp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + return memory_read_from_buffer(buf, count, &off, bin_attr->private, + bin_attr->size); +} + +static BIN_ATTR_RO(symbol_map, 0); + +static void opal_export_symmap(void) +{ + const __be64 *syms; + unsigned int size; + struct device_node *fw; + int rc; + + fw = of_find_node_by_path("/ibm,opal/firmware"); + if (!fw) + return; + syms = of_get_property(fw, "symbol-map", &size); + if (!syms || size != 2 * sizeof(__be64)) + return; + + /* Setup attributes */ + bin_attr_symbol_map.private = __va(be64_to_cpu(syms[0])); + bin_attr_symbol_map.size = be64_to_cpu(syms[1]); + + rc = sysfs_create_bin_file(opal_kobj, &bin_attr_symbol_map); + if (rc) + pr_warn("Error %d creating OPAL symbols file\n", rc); +} + static void __init opal_dump_region_init(void) { void *addr; @@ -653,6 +687,14 @@ static void opal_ipmi_init(struct device_node *opal_node) of_platform_device_create(np, NULL, NULL); } +static void opal_i2c_create_devs(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "ibm,opal-i2c") + of_platform_device_create(np, NULL, NULL); +} + static int __init opal_init(void) { struct device_node *np, *consoles; @@ -679,6 +721,9 @@ static int __init opal_init(void) of_node_put(consoles); } + /* Create i2c platform devices */ + opal_i2c_create_devs(); + /* Find all OPAL interrupts and request them */ irqs = of_get_property(opal_node, "opal-interrupts", &irqlen); pr_debug("opal: Found %d interrupts reserved for OPAL\n", @@ -702,6 +747,8 @@ static int __init opal_init(void) /* Create "opal" kobject under /sys/firmware */ rc = opal_sysfs_init(); if (rc == 0) { + /* Export symbol map to userspace */ + opal_export_symmap(); /* Setup dump region interface */ opal_dump_region_init(); /* Setup error log interface */ @@ -824,3 +871,4 @@ EXPORT_SYMBOL_GPL(opal_rtc_read); EXPORT_SYMBOL_GPL(opal_rtc_write); EXPORT_SYMBOL_GPL(opal_tpo_read); EXPORT_SYMBOL_GPL(opal_tpo_write); +EXPORT_SYMBOL_GPL(opal_i2c_request); diff --git a/arch/powerpc/platforms/powernv/powernv.h b/arch/powerpc/platforms/powernv/powernv.h index 6c8e2d188cd..604c48e7879 100644 --- a/arch/powerpc/platforms/powernv/powernv.h +++ b/arch/powerpc/platforms/powernv/powernv.h @@ -29,6 +29,8 @@ static inline u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev) } #endif +extern u32 pnv_get_supported_cpuidle_states(void); + extern void pnv_lpc_init(void); bool cpu_core_split_required(void); diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 30b1c3e298a..b700a329c31 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -36,8 +36,12 @@ #include <asm/opal.h> #include <asm/kexec.h> #include <asm/smp.h> +#include <asm/cputhreads.h> +#include <asm/cpuidle.h> +#include <asm/code-patching.h> #include "powernv.h" +#include "subcore.h" static void __init pnv_setup_arch(void) { @@ -288,6 +292,168 @@ static void __init pnv_setup_machdep_rtas(void) } #endif /* CONFIG_PPC_POWERNV_RTAS */ +static u32 supported_cpuidle_states; + +int pnv_save_sprs_for_winkle(void) +{ + int cpu; + int rc; + + /* + * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross + * all cpus at boot. Get these reg values of current cpu and use the + * same accross all cpus. + */ + uint64_t lpcr_val = mfspr(SPRN_LPCR); + uint64_t hid0_val = mfspr(SPRN_HID0); + uint64_t hid1_val = mfspr(SPRN_HID1); + uint64_t hid4_val = mfspr(SPRN_HID4); + uint64_t hid5_val = mfspr(SPRN_HID5); + uint64_t hmeer_val = mfspr(SPRN_HMEER); + + for_each_possible_cpu(cpu) { + uint64_t pir = get_hard_smp_processor_id(cpu); + uint64_t hsprg0_val = (uint64_t)&paca[cpu]; + + /* + * HSPRG0 is used to store the cpu's pointer to paca. Hence last + * 3 bits are guaranteed to be 0. Program slw to restore HSPRG0 + * with 63rd bit set, so that when a thread wakes up at 0x100 we + * can use this bit to distinguish between fastsleep and + * deep winkle. + */ + hsprg0_val |= 1; + + rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val); + if (rc != 0) + return rc; + + rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val); + if (rc != 0) + return rc; + + /* HIDs are per core registers */ + if (cpu_thread_in_core(cpu) == 0) { + + rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val); + if (rc != 0) + return rc; + + rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val); + if (rc != 0) + return rc; + + rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val); + if (rc != 0) + return rc; + + rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val); + if (rc != 0) + return rc; + + rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val); + if (rc != 0) + return rc; + } + } + + return 0; +} + +static void pnv_alloc_idle_core_states(void) +{ + int i, j; + int nr_cores = cpu_nr_cores(); + u32 *core_idle_state; + + /* + * core_idle_state - First 8 bits track the idle state of each thread + * of the core. The 8th bit is the lock bit. Initially all thread bits + * are set. They are cleared when the thread enters deep idle state + * like sleep and winkle. Initially the lock bit is cleared. + * The lock bit has 2 purposes + * a. While the first thread is restoring core state, it prevents + * other threads in the core from switching to process context. + * b. While the last thread in the core is saving the core state, it + * prevents a different thread from waking up. + */ + for (i = 0; i < nr_cores; i++) { + int first_cpu = i * threads_per_core; + int node = cpu_to_node(first_cpu); + + core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node); + *core_idle_state = PNV_CORE_IDLE_THREAD_BITS; + + for (j = 0; j < threads_per_core; j++) { + int cpu = first_cpu + j; + + paca[cpu].core_idle_state_ptr = core_idle_state; + paca[cpu].thread_idle_state = PNV_THREAD_RUNNING; + paca[cpu].thread_mask = 1 << j; + } + } + + update_subcore_sibling_mask(); + + if (supported_cpuidle_states & OPAL_PM_WINKLE_ENABLED) + pnv_save_sprs_for_winkle(); +} + +u32 pnv_get_supported_cpuidle_states(void) +{ + return supported_cpuidle_states; +} +EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states); + +static int __init pnv_init_idle_states(void) +{ + struct device_node *power_mgt; + int dt_idle_states; + const __be32 *idle_state_flags; + u32 len_flags, flags; + int i; + + supported_cpuidle_states = 0; + + if (cpuidle_disable != IDLE_NO_OVERRIDE) + return 0; + + if (!firmware_has_feature(FW_FEATURE_OPALv3)) + return 0; + + power_mgt = of_find_node_by_path("/ibm,opal/power-mgt"); + if (!power_mgt) { + pr_warn("opal: PowerMgmt Node not found\n"); + return 0; + } + + idle_state_flags = of_get_property(power_mgt, + "ibm,cpu-idle-state-flags", &len_flags); + if (!idle_state_flags) { + pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-flags\n"); + return 0; + } + + dt_idle_states = len_flags / sizeof(u32); + + for (i = 0; i < dt_idle_states; i++) { + flags = be32_to_cpu(idle_state_flags[i]); + supported_cpuidle_states |= flags; + } + if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) { + patch_instruction( + (unsigned int *)pnv_fastsleep_workaround_at_entry, + PPC_INST_NOP); + patch_instruction( + (unsigned int *)pnv_fastsleep_workaround_at_exit, + PPC_INST_NOP); + } + pnv_alloc_idle_core_states(); + return 0; +} + +subsys_initcall(pnv_init_idle_states); + static int __init pnv_probe(void) { unsigned long root = of_get_flat_dt_root(); diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c index b716f666e48..fc34025ef82 100644 --- a/arch/powerpc/platforms/powernv/smp.c +++ b/arch/powerpc/platforms/powernv/smp.c @@ -150,6 +150,7 @@ static void pnv_smp_cpu_kill_self(void) { unsigned int cpu; unsigned long srr1; + u32 idle_states; /* Standard hot unplug procedure */ local_irq_disable(); @@ -160,13 +161,23 @@ static void pnv_smp_cpu_kill_self(void) generic_set_cpu_dead(cpu); smp_wmb(); + idle_states = pnv_get_supported_cpuidle_states(); /* We don't want to take decrementer interrupts while we are offline, * so clear LPCR:PECE1. We keep PECE2 enabled. */ mtspr(SPRN_LPCR, mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1); while (!generic_check_cpu_restart(cpu)) { + ppc64_runlatch_off(); - srr1 = power7_nap(1); + + if (idle_states & OPAL_PM_WINKLE_ENABLED) + srr1 = power7_winkle(); + else if ((idle_states & OPAL_PM_SLEEP_ENABLED) || + (idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) + srr1 = power7_sleep(); + else + srr1 = power7_nap(1); + ppc64_runlatch_on(); /* @@ -198,13 +209,27 @@ static void pnv_smp_cpu_kill_self(void) #endif /* CONFIG_HOTPLUG_CPU */ +static int pnv_cpu_bootable(unsigned int nr) +{ + /* + * Starting with POWER8, the subcore logic relies on all threads of a + * core being booted so that they can participate in split mode + * switches. So on those machines we ignore the smt_enabled_at_boot + * setting (smt-enabled on the kernel command line). + */ + if (cpu_has_feature(CPU_FTR_ARCH_207S)) + return 1; + + return smp_generic_cpu_bootable(nr); +} + static struct smp_ops_t pnv_smp_ops = { .message_pass = smp_muxed_ipi_message_pass, .cause_ipi = NULL, /* Filled at runtime by xics_smp_probe() */ .probe = xics_smp_probe, .kick_cpu = pnv_smp_kick_cpu, .setup_cpu = pnv_smp_setup_cpu, - .cpu_bootable = smp_generic_cpu_bootable, + .cpu_bootable = pnv_cpu_bootable, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = pnv_smp_cpu_disable, .cpu_die = generic_cpu_die, diff --git a/arch/powerpc/platforms/powernv/subcore.c b/arch/powerpc/platforms/powernv/subcore.c index c87f96b79d1..f60f80ada90 100644 --- a/arch/powerpc/platforms/powernv/subcore.c +++ b/arch/powerpc/platforms/powernv/subcore.c @@ -160,6 +160,18 @@ static void wait_for_sync_step(int step) mb(); } +static void update_hid_in_slw(u64 hid0) +{ + u64 idle_states = pnv_get_supported_cpuidle_states(); + + if (idle_states & OPAL_PM_WINKLE_ENABLED) { + /* OPAL call to patch slw with the new HID0 value */ + u64 cpu_pir = hard_smp_processor_id(); + + opal_slw_set_reg(cpu_pir, SPRN_HID0, hid0); + } +} + static void unsplit_core(void) { u64 hid0, mask; @@ -179,6 +191,7 @@ static void unsplit_core(void) hid0 = mfspr(SPRN_HID0); hid0 &= ~HID0_POWER8_DYNLPARDIS; mtspr(SPRN_HID0, hid0); + update_hid_in_slw(hid0); while (mfspr(SPRN_HID0) & mask) cpu_relax(); @@ -215,6 +228,7 @@ static void split_core(int new_mode) hid0 = mfspr(SPRN_HID0); hid0 |= HID0_POWER8_DYNLPARDIS | split_parms[i].value; mtspr(SPRN_HID0, hid0); + update_hid_in_slw(hid0); /* Wait for it to happen */ while (!(mfspr(SPRN_HID0) & split_parms[i].mask)) @@ -251,6 +265,25 @@ bool cpu_core_split_required(void) return true; } +void update_subcore_sibling_mask(void) +{ + int cpu; + /* + * sibling mask for the first cpu. Left shift this by required bits + * to get sibling mask for the rest of the cpus. + */ + int sibling_mask_first_cpu = (1 << threads_per_subcore) - 1; + + for_each_possible_cpu(cpu) { + int tid = cpu_thread_in_core(cpu); + int offset = (tid / threads_per_subcore) * threads_per_subcore; + int mask = sibling_mask_first_cpu << offset; + + paca[cpu].subcore_sibling_mask = mask; + + } +} + static int cpu_update_split_mode(void *data) { int cpu, new_mode = *(int *)data; @@ -284,6 +317,7 @@ static int cpu_update_split_mode(void *data) /* Make the new mode public */ subcores_per_core = new_mode; threads_per_subcore = threads_per_core / subcores_per_core; + update_subcore_sibling_mask(); /* Make sure the new mode is written before we exit */ mb(); diff --git a/arch/powerpc/platforms/powernv/subcore.h b/arch/powerpc/platforms/powernv/subcore.h index 148abc91deb..84e02ae5289 100644 --- a/arch/powerpc/platforms/powernv/subcore.h +++ b/arch/powerpc/platforms/powernv/subcore.h @@ -14,5 +14,12 @@ #define SYNC_STEP_FINISHED 3 /* Set by secondary when split/unsplit is done */ #ifndef __ASSEMBLY__ + +#ifdef CONFIG_SMP void split_core_secondary_loop(u8 *state); -#endif +extern void update_subcore_sibling_mask(void); +#else +static inline void update_subcore_sibling_mask(void) { }; +#endif /* CONFIG_SMP */ + +#endif /* __ASSEMBLY__ */ diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c index e9248bb9173..aedec095793 100644 --- a/drivers/cpuidle/cpuidle-powernv.c +++ b/drivers/cpuidle/cpuidle-powernv.c @@ -16,13 +16,10 @@ #include <asm/machdep.h> #include <asm/firmware.h> +#include <asm/opal.h> #include <asm/runlatch.h> -/* Flags and constants used in PowerNV platform */ - #define MAX_POWERNV_IDLE_STATES 8 -#define IDLE_USE_INST_NAP 0x00010000 /* Use nap instruction */ -#define IDLE_USE_INST_SLEEP 0x00020000 /* Use sleep instruction */ struct cpuidle_driver powernv_idle_driver = { .name = "powernv_idle", @@ -197,7 +194,7 @@ static int powernv_add_idle_states(void) * target residency to be 10x exit_latency */ latency_ns = be32_to_cpu(idle_state_latency[i]); - if (flags & IDLE_USE_INST_NAP) { + if (flags & OPAL_PM_NAP_ENABLED) { /* Add NAP state */ strcpy(powernv_states[nr_idle_states].name, "Nap"); strcpy(powernv_states[nr_idle_states].desc, "Nap"); @@ -210,7 +207,8 @@ static int powernv_add_idle_states(void) nr_idle_states++; } - if (flags & IDLE_USE_INST_SLEEP) { + if (flags & OPAL_PM_SLEEP_ENABLED || + flags & OPAL_PM_SLEEP_ENABLED_ER1) { /* Add FASTSLEEP state */ strcpy(powernv_states[nr_idle_states].name, "FastSleep"); strcpy(powernv_states[nr_idle_states].desc, "FastSleep"); diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index c1351d9fb35..91a488c7cc4 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1072,4 +1072,15 @@ config SCx200_ACB This support is also available as a module. If so, the module will be called scx200_acb. +config I2C_OPAL + tristate "IBM OPAL I2C driver" + depends on PPC_POWERNV + default y + help + This exposes the PowerNV platform i2c busses to the linux i2c layer, + the driver is based on the OPAL interfaces. + + This driver can also be built as a module. If so, the module will be + called as i2c-opal. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 5e6c8223719..56388f658d2 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -102,6 +102,7 @@ obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o obj-$(CONFIG_I2C_BCM_KONA) += i2c-bcm-kona.o obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c-cros-ec-tunnel.o obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o +obj-$(CONFIG_I2C_OPAL) += i2c-opal.o obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o obj-$(CONFIG_SCx200_ACB) += scx200_acb.o diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c new file mode 100644 index 00000000000..16f90b1a750 --- /dev/null +++ b/drivers/i2c/busses/i2c-opal.c @@ -0,0 +1,294 @@ +/* + * IBM OPAL I2C driver + * Copyright (C) 2014 IBM + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. + */ + +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/firmware.h> +#include <asm/opal.h> + +static int i2c_opal_translate_error(int rc) +{ + switch (rc) { + case OPAL_NO_MEM: + return -ENOMEM; + case OPAL_PARAMETER: + return -EINVAL; + case OPAL_I2C_ARBT_LOST: + return -EAGAIN; + case OPAL_I2C_TIMEOUT: + return -ETIMEDOUT; + case OPAL_I2C_NACK_RCVD: + return -ENXIO; + case OPAL_I2C_STOP_ERR: + return -EBUSY; + default: + return -EIO; + } +} + +static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req) +{ + struct opal_msg msg; + int token, rc; + + token = opal_async_get_token_interruptible(); + if (token < 0) { + if (token != -ERESTARTSYS) + pr_err("Failed to get the async token\n"); + + return token; + } + + rc = opal_i2c_request(token, bus_id, req); + if (rc != OPAL_ASYNC_COMPLETION) { + rc = i2c_opal_translate_error(rc); + goto exit; + } + + rc = opal_async_wait_response(token, &msg); + if (rc) + goto exit; + + rc = be64_to_cpu(msg.params[1]); + if (rc != OPAL_SUCCESS) { + rc = i2c_opal_translate_error(rc); + goto exit; + } + +exit: + opal_async_release_token(token); + return rc; +} + +static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + unsigned long opal_id = (unsigned long)adap->algo_data; + struct opal_i2c_request req; + int rc, i; + + /* We only support fairly simple combinations here of one + * or two messages + */ + memset(&req, 0, sizeof(req)); + switch(num) { + case 0: + return 0; + case 1: + req.type = (msgs[0].flags & I2C_M_RD) ? + OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE; + req.addr = cpu_to_be16(msgs[0].addr); + req.size = cpu_to_be32(msgs[0].len); + req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf)); + break; + case 2: + /* For two messages, we basically support only simple + * smbus transactions of a write plus a read. We might + * want to allow also two writes but we'd have to bounce + * the data into a single buffer. + */ + if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD)) + return -EOPNOTSUPP; + if (msgs[0].len > 4) + return -EOPNOTSUPP; + if (msgs[0].addr != msgs[1].addr) + return -EOPNOTSUPP; + req.type = OPAL_I2C_SM_READ; + req.addr = cpu_to_be16(msgs[0].addr); + req.subaddr_sz = msgs[0].len; + for (i = 0; i < msgs[0].len; i++) + req.subaddr = (req.subaddr << 8) | msgs[0].buf[i]; + req.subaddr = cpu_to_be32(req.subaddr); + req.size = cpu_to_be32(msgs[1].len); + req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf)); + break; + default: + return -EOPNOTSUPP; + } + + rc = i2c_opal_send_request(opal_id, &req); + if (rc) + return rc; + + return num; +} + +static int i2c_opal_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + unsigned long opal_id = (unsigned long)adap->algo_data; + struct opal_i2c_request req; + u8 local[2]; + int rc; + + memset(&req, 0, sizeof(req)); + + req.addr = cpu_to_be16(addr); + switch (size) { + case I2C_SMBUS_BYTE: + req.buffer_ra = cpu_to_be64(__pa(&data->byte)); + req.size = cpu_to_be32(1); + /* Fall through */ + case I2C_SMBUS_QUICK: + req.type = (read_write == I2C_SMBUS_READ) ? + OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE; + break; + case I2C_SMBUS_BYTE_DATA: + req.buffer_ra = cpu_to_be64(__pa(&data->byte)); + req.size = cpu_to_be32(1); + req.subaddr = cpu_to_be32(command); + req.subaddr_sz = 1; + req.type = (read_write == I2C_SMBUS_READ) ? + OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; + break; + case I2C_SMBUS_WORD_DATA: + if (!read_write) { + local[0] = data->word & 0xff; + local[1] = (data->word >> 8) & 0xff; + } + req.buffer_ra = cpu_to_be64(__pa(local)); + req.size = cpu_to_be32(2); + req.subaddr = cpu_to_be32(command); + req.subaddr_sz = 1; + req.type = (read_write == I2C_SMBUS_READ) ? + OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + req.buffer_ra = cpu_to_be64(__pa(&data->block[1])); + req.size = cpu_to_be32(data->block[0]); + req.subaddr = cpu_to_be32(command); + req.subaddr_sz = 1; + req.type = (read_write == I2C_SMBUS_READ) ? + OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; + break; + default: + return -EINVAL; + } + + rc = i2c_opal_send_request(opal_id, &req); + if (!rc && read_write && size == I2C_SMBUS_WORD_DATA) { + data->word = ((u16)local[1]) << 8; + data->word |= local[0]; + } + + return rc; +} + +static u32 i2c_opal_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK; +} + +static const struct i2c_algorithm i2c_opal_algo = { + .master_xfer = i2c_opal_master_xfer, + .smbus_xfer = i2c_opal_smbus_xfer, + .functionality = i2c_opal_func, +}; + +static int i2c_opal_probe(struct platform_device *pdev) +{ + struct i2c_adapter *adapter; + const char *pname; + u32 opal_id; + int rc; + + if (!pdev->dev.of_node) + return -ENODEV; + + rc = of_property_read_u32(pdev->dev.of_node, "ibm,opal-id", &opal_id); + if (rc) { + dev_err(&pdev->dev, "Missing ibm,opal-id property !\n"); + return -EIO; + } + + adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL); + if (!adapter) + return -ENOMEM; + + adapter->algo = &i2c_opal_algo; + adapter->algo_data = (void *)(unsigned long)opal_id; + adapter->dev.parent = &pdev->dev; + adapter->dev.of_node = of_node_get(pdev->dev.of_node); + pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL); + if (pname) + strlcpy(adapter->name, pname, sizeof(adapter->name)); + else + strlcpy(adapter->name, "opal", sizeof(adapter->name)); + + platform_set_drvdata(pdev, adapter); + rc = i2c_add_adapter(adapter); + if (rc) + dev_err(&pdev->dev, "Failed to register the i2c adapter\n"); + + return rc; +} + +static int i2c_opal_remove(struct platform_device *pdev) +{ + struct i2c_adapter *adapter = platform_get_drvdata(pdev); + + i2c_del_adapter(adapter); + + return 0; +} + +static const struct of_device_id i2c_opal_of_match[] = { + { + .compatible = "ibm,opal-i2c", + }, + { } +}; +MODULE_DEVICE_TABLE(of, i2c_opal_of_match); + +static struct platform_driver i2c_opal_driver = { + .probe = i2c_opal_probe, + .remove = i2c_opal_remove, + .driver = { + .name = "i2c-opal", + .of_match_table = i2c_opal_of_match, + }, +}; + +static int __init i2c_opal_init(void) +{ + if (!firmware_has_feature(FW_FEATURE_OPAL)) + return -ENODEV; + + return platform_driver_register(&i2c_opal_driver); +} +module_init(i2c_opal_init); + +static void __exit i2c_opal_exit(void) +{ + return platform_driver_unregister(&i2c_opal_driver); +} +module_exit(i2c_opal_exit); + +MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>"); +MODULE_DESCRIPTION("IBM OPAL I2C driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c index cca47210913..51fd6b52437 100644 --- a/drivers/misc/cxl/context.c +++ b/drivers/misc/cxl/context.c @@ -34,7 +34,8 @@ struct cxl_context *cxl_context_alloc(void) /* * Initialises a CXL context. */ -int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master) +int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master, + struct address_space *mapping) { int i; @@ -42,6 +43,8 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master) ctx->afu = afu; ctx->master = master; ctx->pid = NULL; /* Set in start work ioctl */ + mutex_init(&ctx->mapping_lock); + ctx->mapping = mapping; /* * Allocate the segment table before we put it in the IDR so that we @@ -82,12 +85,12 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master) * Allocating IDR! We better make sure everything's setup that * dereferences from it. */ + mutex_lock(&afu->contexts_lock); idr_preload(GFP_KERNEL); - spin_lock(&afu->contexts_lock); i = idr_alloc(&ctx->afu->contexts_idr, ctx, 0, ctx->afu->num_procs, GFP_NOWAIT); - spin_unlock(&afu->contexts_lock); idr_preload_end(); + mutex_unlock(&afu->contexts_lock); if (i < 0) return i; @@ -147,6 +150,12 @@ static void __detach_context(struct cxl_context *ctx) afu_release_irqs(ctx); flush_work(&ctx->fault_work); /* Only needed for dedicated process */ wake_up_all(&ctx->wq); + + /* Release Problem State Area mapping */ + mutex_lock(&ctx->mapping_lock); + if (ctx->mapping) + unmap_mapping_range(ctx->mapping, 0, 0, 1); + mutex_unlock(&ctx->mapping_lock); } /* @@ -168,21 +177,22 @@ void cxl_context_detach_all(struct cxl_afu *afu) struct cxl_context *ctx; int tmp; - rcu_read_lock(); - idr_for_each_entry(&afu->contexts_idr, ctx, tmp) + mutex_lock(&afu->contexts_lock); + idr_for_each_entry(&afu->contexts_idr, ctx, tmp) { /* * Anything done in here needs to be setup before the IDR is * created and torn down after the IDR removed */ __detach_context(ctx); - rcu_read_unlock(); + } + mutex_unlock(&afu->contexts_lock); } void cxl_context_free(struct cxl_context *ctx) { - spin_lock(&ctx->afu->contexts_lock); + mutex_lock(&ctx->afu->contexts_lock); idr_remove(&ctx->afu->contexts_idr, ctx->pe); - spin_unlock(&ctx->afu->contexts_lock); + mutex_unlock(&ctx->afu->contexts_lock); synchronize_rcu(); free_page((u64)ctx->sstp); diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h index b5b6bda44a0..28078f8894a 100644 --- a/drivers/misc/cxl/cxl.h +++ b/drivers/misc/cxl/cxl.h @@ -351,7 +351,7 @@ struct cxl_afu { struct device *chardev_s, *chardev_m, *chardev_d; struct idr contexts_idr; struct dentry *debugfs; - spinlock_t contexts_lock; + struct mutex contexts_lock; struct mutex spa_mutex; spinlock_t afu_cntl_lock; @@ -398,6 +398,10 @@ struct cxl_context { phys_addr_t psn_phys; u64 psn_size; + /* Used to unmap any mmaps when force detaching */ + struct address_space *mapping; + struct mutex mapping_lock; + spinlock_t sste_lock; /* Protects segment table entries */ struct cxl_sste *sstp; u64 sstp0, sstp1; @@ -599,7 +603,8 @@ int cxl_alloc_sst(struct cxl_context *ctx); void init_cxl_native(void); struct cxl_context *cxl_context_alloc(void); -int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master); +int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master, + struct address_space *mapping); void cxl_context_free(struct cxl_context *ctx); int cxl_context_iomap(struct cxl_context *ctx, struct vm_area_struct *vma); diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c index 378b099e7c0..e9f2f10dbb3 100644 --- a/drivers/misc/cxl/file.c +++ b/drivers/misc/cxl/file.c @@ -77,7 +77,7 @@ static int __afu_open(struct inode *inode, struct file *file, bool master) goto err_put_afu; } - if ((rc = cxl_context_init(ctx, afu, master))) + if ((rc = cxl_context_init(ctx, afu, master, inode->i_mapping))) goto err_put_afu; pr_devel("afu_open pe: %i\n", ctx->pe); @@ -113,6 +113,10 @@ static int afu_release(struct inode *inode, struct file *file) __func__, ctx->pe); cxl_context_detach(ctx); + mutex_lock(&ctx->mapping_lock); + ctx->mapping = NULL; + mutex_unlock(&ctx->mapping_lock); + put_device(&ctx->afu->dev); /* diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c index 9a5a442269a..f2b37b41a0d 100644 --- a/drivers/misc/cxl/native.c +++ b/drivers/misc/cxl/native.c @@ -277,6 +277,7 @@ static int do_process_element_cmd(struct cxl_context *ctx, u64 cmd, u64 pe_state) { u64 state; + unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT); WARN_ON(!ctx->afu->enabled); @@ -286,6 +287,10 @@ static int do_process_element_cmd(struct cxl_context *ctx, smp_mb(); cxl_p1n_write(ctx->afu, CXL_PSL_LLCMD_An, cmd | ctx->pe); while (1) { + if (time_after_eq(jiffies, timeout)) { + dev_warn(&ctx->afu->dev, "WARNING: Process Element Command timed out!\n"); + return -EBUSY; + } state = be64_to_cpup(ctx->afu->sw_command_status); if (state == ~0ULL) { pr_err("cxl: Error adding process element to AFU\n"); @@ -610,13 +615,6 @@ static inline int detach_process_native_dedicated(struct cxl_context *ctx) return 0; } -/* - * TODO: handle case when this is called inside a rcu_read_lock() which may - * happen when we unbind the driver (ie. cxl_context_detach_all()) . Terminate - * & remove use a mutex lock and schedule which will not good with lock held. - * May need to write do_process_element_cmd() that handles outstanding page - * faults synchronously. - */ static inline int detach_process_native_afu_directed(struct cxl_context *ctx) { if (!ctx->pe_inserted) diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c index 10c98ab7f46..0f2cc9f8b4d 100644 --- a/drivers/misc/cxl/pci.c +++ b/drivers/misc/cxl/pci.c @@ -502,7 +502,7 @@ static struct cxl_afu *cxl_alloc_afu(struct cxl *adapter, int slice) afu->dev.release = cxl_release_afu; afu->slice = slice; idr_init(&afu->contexts_idr); - spin_lock_init(&afu->contexts_lock); + mutex_init(&afu->contexts_lock); spin_lock_init(&afu->afu_cntl_lock); mutex_init(&afu->spa_mutex); diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c index ce7ec06d87d..461bdbd5d48 100644 --- a/drivers/misc/cxl/sysfs.c +++ b/drivers/misc/cxl/sysfs.c @@ -121,7 +121,7 @@ static ssize_t reset_store_afu(struct device *device, int rc; /* Not safe to reset if it is currently in use */ - spin_lock(&afu->contexts_lock); + mutex_lock(&afu->contexts_lock); if (!idr_is_empty(&afu->contexts_idr)) { rc = -EBUSY; goto err; @@ -132,7 +132,7 @@ static ssize_t reset_store_afu(struct device *device, rc = count; err: - spin_unlock(&afu->contexts_lock); + mutex_unlock(&afu->contexts_lock); return rc; } @@ -247,7 +247,7 @@ static ssize_t mode_store(struct device *device, struct device_attribute *attr, int rc = -EBUSY; /* can't change this if we have a user */ - spin_lock(&afu->contexts_lock); + mutex_lock(&afu->contexts_lock); if (!idr_is_empty(&afu->contexts_idr)) goto err; @@ -271,7 +271,7 @@ static ssize_t mode_store(struct device *device, struct device_attribute *attr, afu->current_mode = 0; afu->num_procs = 0; - spin_unlock(&afu->contexts_lock); + mutex_unlock(&afu->contexts_lock); if ((rc = _cxl_afu_deactivate_mode(afu, old_mode))) return rc; @@ -280,7 +280,7 @@ static ssize_t mode_store(struct device *device, struct device_attribute *attr, return count; err: - spin_unlock(&afu->contexts_lock); + mutex_unlock(&afu->contexts_lock); return rc; } diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h index 12e26683c70..d3475e1f15e 100644 --- a/include/uapi/linux/audit.h +++ b/include/uapi/linux/audit.h @@ -371,7 +371,9 @@ enum { #define AUDIT_ARCH_PARISC (EM_PARISC) #define AUDIT_ARCH_PARISC64 (EM_PARISC|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_PPC (EM_PPC) +/* do not define AUDIT_ARCH_PPCLE since it is not supported by audit */ #define AUDIT_ARCH_PPC64 (EM_PPC64|__AUDIT_ARCH_64BIT) +#define AUDIT_ARCH_PPC64LE (EM_PPC64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_S390 (EM_S390) #define AUDIT_ARCH_S390X (EM_S390|__AUDIT_ARCH_64BIT) #define AUDIT_ARCH_SH (EM_SH) |