summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/libsas/sas_ata.c71
-rw-r--r--drivers/scsi/libsas/sas_discover.c1
-rw-r--r--drivers/scsi/libsas/sas_expander.c178
-rw-r--r--drivers/scsi/libsas/sas_internal.h6
-rw-r--r--include/scsi/sas.h4
-rw-r--r--include/scsi/sas_ata.h8
6 files changed, 179 insertions, 89 deletions
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index ba1ebfe991d..25008a42412 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -278,26 +278,84 @@ static struct sas_internal *dev_to_sas_internal(struct domain_device *dev)
return to_sas_internal(dev->port->ha->core.shost->transportt);
}
+static void sas_get_ata_command_set(struct domain_device *dev);
+
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+ if (phy->attached_tproto & SAS_PROTOCOL_STP)
+ dev->tproto = phy->attached_tproto;
+ if (phy->attached_sata_dev)
+ dev->tproto |= SATA_DEV;
+
+ if (phy->attached_dev_type == SATA_PENDING)
+ dev->dev_type = SATA_PENDING;
+ else {
+ int res;
+
+ dev->dev_type = SATA_DEV;
+ res = sas_get_report_phy_sata(dev->parent, phy->phy_id,
+ &dev->sata_dev.rps_resp);
+ if (res) {
+ SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
+ "0x%x\n", SAS_ADDR(dev->parent->sas_addr),
+ phy->phy_id, res);
+ return res;
+ }
+ memcpy(dev->frame_rcvd, &dev->sata_dev.rps_resp.rps.fis,
+ sizeof(struct dev_to_host_fis));
+ /* TODO switch to ata_dev_classify() */
+ sas_get_ata_command_set(dev);
+ }
+ return 0;
+}
+
+static int sas_ata_clear_pending(struct domain_device *dev, struct ex_phy *phy)
+{
+ int res;
+
+ /* we weren't pending, so successfully end the reset sequence now */
+ if (dev->dev_type != SATA_PENDING)
+ return 1;
+
+ /* hmmm, if this succeeds do we need to repost the domain_device to the
+ * lldd so it can pick up new parameters?
+ */
+ res = sas_get_ata_info(dev, phy);
+ if (res)
+ return 0; /* retry */
+ else
+ return 1;
+}
+
static int smp_ata_check_ready(struct ata_link *link)
{
int res;
- u8 addr[8];
struct ata_port *ap = link->ap;
struct domain_device *dev = ap->private_data;
struct domain_device *ex_dev = dev->parent;
struct sas_phy *phy = sas_get_local_phy(dev);
+ struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy->number];
- res = sas_get_phy_attached_sas_addr(ex_dev, phy->number, addr);
+ res = sas_ex_phy_discover(ex_dev, phy->number);
sas_put_local_phy(phy);
+
/* break the wait early if the expander is unreachable,
* otherwise keep polling
*/
if (res == -ECOMM)
return res;
- if (res != SMP_RESP_FUNC_ACC || SAS_ADDR(addr) == 0)
+ if (res != SMP_RESP_FUNC_ACC)
return 0;
- else
- return 1;
+
+ switch (ex_phy->attached_dev_type) {
+ case SATA_PENDING:
+ return 0;
+ case SAS_END_DEV:
+ if (ex_phy->attached_sata_dev)
+ return sas_ata_clear_pending(dev, ex_phy);
+ default:
+ return -ENODEV;
+ }
}
static int local_ata_check_ready(struct ata_link *link)
@@ -584,6 +642,9 @@ static void sas_get_ata_command_set(struct domain_device *dev)
struct dev_to_host_fis *fis =
(struct dev_to_host_fis *) dev->frame_rcvd;
+ if (dev->dev_type == SATA_PENDING)
+ return;
+
if ((fis->sector_count == 1 && /* ATA */
fis->lbal == 1 &&
fis->lbam == 0 &&
diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c
index c1ac99d25f5..8bcfcaa7b2e 100644
--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -48,6 +48,7 @@ void sas_init_dev(struct domain_device *dev)
case SATA_DEV:
case SATA_PM:
case SATA_PM_PORT:
+ case SATA_PENDING:
INIT_LIST_HEAD(&dev->sata_dev.children);
break;
default:
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 4b2ecd35dc5..7e2d3c4c617 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -183,13 +183,27 @@ static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
}
}
-static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
- void *disc_resp)
+static enum sas_dev_type to_dev_type(struct discover_resp *dr)
{
+ /* This is detecting a failure to transmit initial dev to host
+ * FIS as described in section J.5 of sas-2 r16
+ */
+ if (dr->attached_dev_type == NO_DEVICE && dr->attached_sata_dev &&
+ dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
+ return SATA_PENDING;
+ else
+ return dr->attached_dev_type;
+}
+
+static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp)
+{
+ enum sas_dev_type dev_type;
+ enum sas_linkrate linkrate;
+ u8 sas_addr[SAS_ADDR_SIZE];
+ struct smp_resp *resp = rsp;
+ struct discover_resp *dr = &resp->disc;
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
- struct smp_resp *resp = disc_resp;
- struct discover_resp *dr = &resp->disc;
struct sas_rphy *rphy = dev->rphy;
bool new_phy = !phy->phy;
char *type;
@@ -213,8 +227,13 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
break;
}
+ /* check if anything important changed to squelch debug */
+ dev_type = phy->attached_dev_type;
+ linkrate = phy->linkrate;
+ memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
+
+ phy->attached_dev_type = to_dev_type(dr);
phy->phy_id = phy_id;
- phy->attached_dev_type = dr->attached_dev_type;
phy->linkrate = dr->linkrate;
phy->attached_sata_host = dr->attached_sata_host;
phy->attached_sata_dev = dr->attached_sata_dev;
@@ -229,7 +248,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
phy->last_da_index = -1;
phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
- phy->phy->identify.device_type = phy->attached_dev_type;
+ phy->phy->identify.device_type = dr->attached_dev_type;
phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
phy->phy->identify.target_port_protocols = phy->attached_tproto;
phy->phy->identify.phy_identifier = phy_id;
@@ -246,6 +265,9 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
}
switch (phy->attached_dev_type) {
+ case SATA_PENDING:
+ type = "stp pending";
+ break;
case NO_DEVICE:
type = "no device";
break;
@@ -270,6 +292,16 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
type = "unknown";
}
+ /* this routine is polled by libata error recovery so filter
+ * unimportant messages
+ */
+ if (new_phy || phy->attached_dev_type != dev_type ||
+ phy->linkrate != linkrate ||
+ SAS_ADDR(phy->attached_sas_addr) != SAS_ADDR(sas_addr))
+ /* pass */;
+ else
+ return;
+
SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
SAS_ADDR(dev->sas_addr), phy->phy_id,
sas_route_char(dev, phy), phy->linkrate,
@@ -304,50 +336,25 @@ struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id)
static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
u8 *disc_resp, int single)
{
- struct domain_device *ata_dev = sas_ex_to_ata(dev, single);
- int i, res;
+ struct discover_resp *dr;
+ int res;
disc_req[9] = single;
- for (i = 1 ; i < 3; i++) {
- struct discover_resp *dr;
- res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
- disc_resp, DISCOVER_RESP_SIZE);
- if (res)
- return res;
- dr = &((struct smp_resp *)disc_resp)->disc;
- if (memcmp(dev->sas_addr, dr->attached_sas_addr,
- SAS_ADDR_SIZE) == 0) {
- sas_printk("Found loopback topology, just ignore it!\n");
- return 0;
- }
-
- /* This is detecting a failure to transmit initial
- * dev to host FIS as described in section J.5 of
- * sas-2 r16
- */
- if (!(dr->attached_dev_type == 0 &&
- dr->attached_sata_dev))
- break;
-
- /* In order to generate the dev to host FIS, we send a
- * link reset to the expander port. If a device was
- * previously detected on this port we ask libata to
- * manage the reset and link recovery.
- */
- if (ata_dev) {
- sas_ata_schedule_reset(ata_dev);
- break;
- }
- sas_smp_phy_control(dev, single, PHY_FUNC_LINK_RESET, NULL);
- /* Wait for the reset to trigger the negotiation */
- msleep(500);
+ res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
+ disc_resp, DISCOVER_RESP_SIZE);
+ if (res)
+ return res;
+ dr = &((struct smp_resp *)disc_resp)->disc;
+ if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) {
+ sas_printk("Found loopback topology, just ignore it!\n");
+ return 0;
}
sas_set_ex_phy(dev, single, disc_resp);
return 0;
}
-static int sas_ex_phy_discover(struct domain_device *dev, int single)
+int sas_ex_phy_discover(struct domain_device *dev, int single)
{
struct expander_device *ex = &dev->ex_dev;
int res = 0;
@@ -652,9 +659,8 @@ int sas_smp_get_phy_events(struct sas_phy *phy)
#define RPS_REQ_SIZE 16
#define RPS_RESP_SIZE 60
-static int sas_get_report_phy_sata(struct domain_device *dev,
- int phy_id,
- struct smp_resp *rps_resp)
+int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
+ struct smp_resp *rps_resp)
{
int res;
u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
@@ -764,21 +770,9 @@ static struct domain_device *sas_ex_discover_end_dev(
#ifdef CONFIG_SCSI_SAS_ATA
if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
- child->dev_type = SATA_DEV;
- if (phy->attached_tproto & SAS_PROTOCOL_STP)
- child->tproto = phy->attached_tproto;
- if (phy->attached_sata_dev)
- child->tproto |= SATA_DEV;
- res = sas_get_report_phy_sata(parent, phy_id,
- &child->sata_dev.rps_resp);
- if (res) {
- SAS_DPRINTK("report phy sata to %016llx:0x%x returned "
- "0x%x\n", SAS_ADDR(parent->sas_addr),
- phy_id, res);
+ res = sas_get_ata_info(child, phy);
+ if (res)
goto out_free;
- }
- memcpy(child->frame_rcvd, &child->sata_dev.rps_resp.rps.fis,
- sizeof(struct dev_to_host_fis));
rphy = sas_end_device_alloc(phy->port);
if (unlikely(!rphy))
@@ -993,7 +987,8 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
if (ex_phy->attached_dev_type != SAS_END_DEV &&
ex_phy->attached_dev_type != FANOUT_DEV &&
- ex_phy->attached_dev_type != EDGE_DEV) {
+ ex_phy->attached_dev_type != EDGE_DEV &&
+ ex_phy->attached_dev_type != SATA_PENDING) {
SAS_DPRINTK("unknown device type(0x%x) attached to ex %016llx "
"phy 0x%x\n", ex_phy->attached_dev_type,
SAS_ADDR(dev->sas_addr),
@@ -1019,6 +1014,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
switch (ex_phy->attached_dev_type) {
case SAS_END_DEV:
+ case SATA_PENDING:
child = sas_ex_discover_end_dev(dev, phy_id);
break;
case FANOUT_DEV:
@@ -1688,8 +1684,8 @@ static int sas_get_phy_change_count(struct domain_device *dev,
return res;
}
-int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
- u8 *attached_sas_addr)
+static int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
+ u8 *sas_addr, enum sas_dev_type *type)
{
int res;
struct smp_resp *disc_resp;
@@ -1701,10 +1697,11 @@ int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
dr = &disc_resp->disc;
res = sas_get_phy_discover(dev, phy_id, disc_resp);
- if (!res) {
- memcpy(attached_sas_addr,disc_resp->disc.attached_sas_addr,8);
- if (dr->attached_dev_type == 0)
- memset(attached_sas_addr, 0, 8);
+ if (res == 0) {
+ memcpy(sas_addr, disc_resp->disc.attached_sas_addr, 8);
+ *type = to_dev_type(dr);
+ if (*type == 0)
+ memset(sas_addr, 0, 8);
}
kfree(disc_resp);
return res;
@@ -1953,39 +1950,62 @@ out:
return res;
}
+static bool dev_type_flutter(enum sas_dev_type new, enum sas_dev_type old)
+{
+ if (old == new)
+ return true;
+
+ /* treat device directed resets as flutter, if we went
+ * SAS_END_DEV to SATA_PENDING the link needs recovery
+ */
+ if ((old == SATA_PENDING && new == SAS_END_DEV) ||
+ (old == SAS_END_DEV && new == SATA_PENDING))
+ return true;
+
+ return false;
+}
+
static int sas_rediscover_dev(struct domain_device *dev, int phy_id, bool last)
{
struct expander_device *ex = &dev->ex_dev;
struct ex_phy *phy = &ex->ex_phy[phy_id];
- u8 attached_sas_addr[8];
+ enum sas_dev_type type = NO_DEVICE;
+ u8 sas_addr[8];
int res;
- res = sas_get_phy_attached_sas_addr(dev, phy_id, attached_sas_addr);
+ res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type);
switch (res) {
case SMP_RESP_NO_PHY:
phy->phy_state = PHY_NOT_PRESENT;
sas_unregister_devs_sas_addr(dev, phy_id, last);
- goto out; break;
+ return res;
case SMP_RESP_PHY_VACANT:
phy->phy_state = PHY_VACANT;
sas_unregister_devs_sas_addr(dev, phy_id, last);
- goto out; break;
+ return res;
case SMP_RESP_FUNC_ACC:
break;
}
- if (SAS_ADDR(attached_sas_addr) == 0) {
+ if (SAS_ADDR(sas_addr) == 0) {
phy->phy_state = PHY_EMPTY;
sas_unregister_devs_sas_addr(dev, phy_id, last);
- } else if (SAS_ADDR(attached_sas_addr) ==
- SAS_ADDR(phy->attached_sas_addr)) {
- SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
- SAS_ADDR(dev->sas_addr), phy_id);
+ return res;
+ } else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) &&
+ dev_type_flutter(type, phy->attached_dev_type)) {
+ struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id);
+ char *action = "";
+
sas_ex_phy_discover(dev, phy_id);
- } else
- res = sas_discover_new(dev, phy_id);
-out:
- return res;
+
+ if (ata_dev && phy->attached_dev_type == SATA_PENDING)
+ action = ", needs recovery";
+ SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter%s\n",
+ SAS_ADDR(dev->sas_addr), phy_id, action);
+ return res;
+ }
+
+ return sas_discover_new(dev, phy_id);
}
/**
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 7818c4673c3..e028d7a4420 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -91,8 +91,9 @@ int sas_smp_get_phy_events(struct sas_phy *phy);
void sas_device_set_phy(struct domain_device *dev, struct sas_port *port);
struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id);
-int sas_get_phy_attached_sas_addr(struct domain_device *dev, int phy_id,
- u8 *attached_sas_addr);
+int sas_ex_phy_discover(struct domain_device *dev, int single);
+int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
+ struct smp_resp *rps_resp);
int sas_try_ata_reset(struct asd_sas_phy *phy);
void sas_hae_reset(struct work_struct *work);
@@ -122,6 +123,7 @@ static inline void sas_fill_in_rphy(struct domain_device *dev,
case SATA_DEV:
/* FIXME: need sata device type */
case SAS_END_DEV:
+ case SATA_PENDING:
rphy->identify.device_type = SAS_END_DEVICE;
break;
case EDGE_DEV:
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 3673d685e6a..a577a833603 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -89,8 +89,7 @@ enum sas_oob_mode {
SAS_OOB_MODE
};
-/* See sas_discover.c if you plan on changing these.
- */
+/* See sas_discover.c if you plan on changing these */
enum sas_dev_type {
NO_DEVICE = 0, /* protocol */
SAS_END_DEV = 1, /* protocol */
@@ -100,6 +99,7 @@ enum sas_dev_type {
SATA_DEV = 5,
SATA_PM = 7,
SATA_PM_PORT= 8,
+ SATA_PENDING = 9,
};
enum sas_protocol {
diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h
index cb724fd010f..0ca2f8a6bc6 100644
--- a/include/scsi/sas_ata.h
+++ b/include/scsi/sas_ata.h
@@ -33,9 +33,10 @@
static inline int dev_is_sata(struct domain_device *dev)
{
return dev->dev_type == SATA_DEV || dev->dev_type == SATA_PM ||
- dev->dev_type == SATA_PM_PORT;
+ dev->dev_type == SATA_PM_PORT || dev->dev_type == SATA_PENDING;
}
+int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy);
int sas_ata_init_host_and_port(struct domain_device *found_dev,
struct scsi_target *starget);
@@ -82,6 +83,11 @@ static inline void sas_ata_schedule_reset(struct domain_device *dev)
static inline void sas_ata_wait_eh(struct domain_device *dev)
{
}
+
+static inline int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy)
+{
+ return 0;
+}
#endif
#endif /* _SAS_ATA_H_ */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-21 13:48:19 +0000