summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/power/devices.txt14
-rw-r--r--Documentation/power/opp.txt2
-rw-r--r--Documentation/power/runtime_pm.txt229
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/mach-omap1/pm_bus.c14
-rw-r--r--arch/arm/mach-omap2/gpio.c2
-rw-r--r--arch/arm/mach-omap2/serial.c1
-rw-r--r--arch/arm/mach-shmobile/board-ap4evb.c5
-rw-r--r--arch/arm/mach-shmobile/board-mackerel.c5
-rw-r--r--arch/arm/mach-shmobile/clock-sh7372.c1
-rw-r--r--arch/arm/mach-shmobile/include/mach/sh7372.h29
-rw-r--r--arch/arm/mach-shmobile/pm-sh7372.c160
-rw-r--r--arch/arm/mach-shmobile/pm_runtime.c22
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c11
-rw-r--r--arch/arm/plat-omap/include/plat/omap_device.h9
-rw-r--r--arch/arm/plat-omap/omap_device.c53
-rw-r--r--arch/sh/kernel/cpu/shmobile/pm_runtime.c6
-rw-r--r--drivers/base/power/Makefile1
-rw-r--r--drivers/base/power/clock_ops.c234
-rw-r--r--drivers/base/power/domain.c1273
-rw-r--r--drivers/base/power/generic_ops.c98
-rw-r--r--drivers/base/power/main.c65
-rw-r--r--drivers/base/power/opp.c17
-rw-r--r--drivers/base/power/runtime.c89
-rw-r--r--drivers/base/power/sysfs.c6
-rw-r--r--drivers/base/power/trace.c2
-rw-r--r--drivers/char/apm-emulation.c2
-rw-r--r--drivers/pci/pci-driver.c18
-rw-r--r--drivers/s390/char/vmwatchdog.c4
-rw-r--r--drivers/s390/cio/css.c8
-rw-r--r--drivers/scsi/scsi_pm.c8
-rw-r--r--include/linux/device.h4
-rw-r--r--include/linux/opp.h8
-rw-r--r--include/linux/pm.h10
-rw-r--r--include/linux/pm_domain.h108
-rw-r--r--include/linux/pm_runtime.h38
-rw-r--r--include/linux/suspend.h8
-rw-r--r--kernel/power/Kconfig8
-rw-r--r--kernel/power/main.c5
-rw-r--r--kernel/power/suspend.c20
40 files changed, 2274 insertions, 324 deletions
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 64565aac6e4..3384d5996be 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -506,8 +506,8 @@ routines. Nevertheless, different callback pointers are used in case there is a
situation where it actually matters.
-Device Power Domains
---------------------
+Device Power Management Domains
+-------------------------------
Sometimes devices share reference clocks or other power resources. In those
cases it generally is not possible to put devices into low-power states
individually. Instead, a set of devices sharing a power resource can be put
@@ -516,8 +516,8 @@ power resource. Of course, they also need to be put into the full-power state
together, by turning the shared power resource on. A set of devices with this
property is often referred to as a power domain.
-Support for power domains is provided through the pwr_domain field of struct
-device. This field is a pointer to an object of type struct dev_power_domain,
+Support for power domains is provided through the pm_domain field of struct
+device. This field is a pointer to an object of type struct dev_pm_domain,
defined in include/linux/pm.h, providing a set of power management callbacks
analogous to the subsystem-level and device driver callbacks that are executed
for the given device during all power transitions, instead of the respective
@@ -604,7 +604,7 @@ state temporarily, for example so that its system wakeup capability can be
disabled. This all depends on the hardware and the design of the subsystem and
device driver in question.
-During system-wide resume from a sleep state it's best to put devices into the
-full-power state, as explained in Documentation/power/runtime_pm.txt. Refer to
-that document for more information regarding this particular issue as well as
+During system-wide resume from a sleep state it's easiest to put devices into
+the full-power state, as explained in Documentation/power/runtime_pm.txt. Refer
+to that document for more information regarding this particular issue as well as
for information on the device runtime power management framework in general.
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index 5ae70a12c1e..3035d00757a 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -321,6 +321,8 @@ opp_init_cpufreq_table - cpufreq framework typically is initialized with
addition to CONFIG_PM as power management feature is required to
dynamically scale voltage and frequency in a system.
+opp_free_cpufreq_table - Free up the table allocated by opp_init_cpufreq_table
+
7. Data Structures
==================
Typically an SoC contains multiple voltage domains which are variable. Each
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index b24875b1ced..14dd3c6ad97 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -1,39 +1,39 @@
-Run-time Power Management Framework for I/O Devices
+Runtime Power Management Framework for I/O Devices
(C) 2009-2011 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
(C) 2010 Alan Stern <stern@rowland.harvard.edu>
1. Introduction
-Support for run-time power management (run-time PM) of I/O devices is provided
+Support for runtime power management (runtime PM) of I/O devices is provided
at the power management core (PM core) level by means of:
* The power management workqueue pm_wq in which bus types and device drivers can
put their PM-related work items. It is strongly recommended that pm_wq be
- used for queuing all work items related to run-time PM, because this allows
+ used for queuing all work items related to runtime PM, because this allows
them to be synchronized with system-wide power transitions (suspend to RAM,
hibernation and resume from system sleep states). pm_wq is declared in
include/linux/pm_runtime.h and defined in kernel/power/main.c.
-* A number of run-time PM fields in the 'power' member of 'struct device' (which
+* A number of runtime PM fields in the 'power' member of 'struct device' (which
is of the type 'struct dev_pm_info', defined in include/linux/pm.h) that can
- be used for synchronizing run-time PM operations with one another.
+ be used for synchronizing runtime PM operations with one another.
-* Three device run-time PM callbacks in 'struct dev_pm_ops' (defined in
+* Three device runtime PM callbacks in 'struct dev_pm_ops' (defined in
include/linux/pm.h).
* A set of helper functions defined in drivers/base/power/runtime.c that can be
- used for carrying out run-time PM operations in such a way that the
+ used for carrying out runtime PM operations in such a way that the
synchronization between them is taken care of by the PM core. Bus types and
device drivers are encouraged to use these functions.
-The run-time PM callbacks present in 'struct dev_pm_ops', the device run-time PM
+The runtime PM callbacks present in 'struct dev_pm_ops', the device runtime PM
fields of 'struct dev_pm_info' and the core helper functions provided for
-run-time PM are described below.
+runtime PM are described below.
-2. Device Run-time PM Callbacks
+2. Device Runtime PM Callbacks
-There are three device run-time PM callbacks defined in 'struct dev_pm_ops':
+There are three device runtime PM callbacks defined in 'struct dev_pm_ops':
struct dev_pm_ops {
...
@@ -72,11 +72,11 @@ knows what to do to handle the device).
not mean that the device has been put into a low power state. It is
supposed to mean, however, that the device will not process data and will
not communicate with the CPU(s) and RAM until the subsystem-level resume
- callback is executed for it. The run-time PM status of a device after
+ callback is executed for it. The runtime PM status of a device after
successful execution of the subsystem-level suspend callback is 'suspended'.
* If the subsystem-level suspend callback returns -EBUSY or -EAGAIN,
- the device's run-time PM status is 'active', which means that the device
+ the device's runtime PM status is 'active', which means that the device
_must_ be fully operational afterwards.
* If the subsystem-level suspend callback returns an error code different
@@ -104,7 +104,7 @@ the device).
* Once the subsystem-level resume callback has completed successfully, the PM
core regards the device as fully operational, which means that the device
- _must_ be able to complete I/O operations as needed. The run-time PM status
+ _must_ be able to complete I/O operations as needed. The runtime PM status
of the device is then 'active'.
* If the subsystem-level resume callback returns an error code, the PM core
@@ -130,7 +130,7 @@ device in that case. The value returned by this callback is ignored by the PM
core.
The helper functions provided by the PM core, described in Section 4, guarantee
-that the following constraints are met with respect to the bus type's run-time
+that the following constraints are met with respect to the bus type's runtime
PM callbacks:
(1) The callbacks are mutually exclusive (e.g. it is forbidden to execute
@@ -142,7 +142,7 @@ PM callbacks:
(2) ->runtime_idle() and ->runtime_suspend() can only be executed for 'active'
devices (i.e. the PM core will only execute ->runtime_idle() or
- ->runtime_suspend() for the devices the run-time PM status of which is
+ ->runtime_suspend() for the devices the runtime PM status of which is
'active').
(3) ->runtime_idle() and ->runtime_suspend() can only be executed for a device
@@ -151,7 +151,7 @@ PM callbacks:
flag of which is set.
(4) ->runtime_resume() can only be executed for 'suspended' devices (i.e. the
- PM core will only execute ->runtime_resume() for the devices the run-time
+ PM core will only execute ->runtime_resume() for the devices the runtime
PM status of which is 'suspended').
Additionally, the helper functions provided by the PM core obey the following
@@ -171,9 +171,9 @@ rules:
scheduled requests to execute the other callbacks for the same device,
except for scheduled autosuspends.
-3. Run-time PM Device Fields
+3. Runtime PM Device Fields
-The following device run-time PM fields are present in 'struct dev_pm_info', as
+The following device runtime PM fields are present in 'struct dev_pm_info', as
defined in include/linux/pm.h:
struct timer_list suspend_timer;
@@ -205,7 +205,7 @@ defined in include/linux/pm.h:
unsigned int disable_depth;
- used for disabling the helper funcions (they work normally if this is
- equal to zero); the initial value of it is 1 (i.e. run-time PM is
+ equal to zero); the initial value of it is 1 (i.e. runtime PM is
initially disabled for all devices)
unsigned int runtime_error;
@@ -229,10 +229,10 @@ defined in include/linux/pm.h:
suspend to complete; means "start a resume as soon as you've suspended"
unsigned int run_wake;
- - set if the device is capable of generating run-time wake-up events
+ - set if the device is capable of generating runtime wake-up events
enum rpm_status runtime_status;
- - the run-time PM status of the device; this field's initial value is
+ - the runtime PM status of the device; this field's initial value is
RPM_SUSPENDED, which means that each device is initially regarded by the
PM core as 'suspended', regardless of its real hardware status
@@ -243,7 +243,7 @@ defined in include/linux/pm.h:
and pm_runtime_forbid() helper functions
unsigned int no_callbacks;
- - indicates that the device does not use the run-time PM callbacks (see
+ - indicates that the device does not use the runtime PM callbacks (see
Section 8); it may be modified only by the pm_runtime_no_callbacks()
helper function
@@ -270,16 +270,16 @@ defined in include/linux/pm.h:
All of the above fields are members of the 'power' member of 'struct device'.
-4. Run-time PM Device Helper Functions
+4. Runtime PM Device Helper Functions
-The following run-time PM helper functions are defined in
+The following runtime PM helper functions are defined in
drivers/base/power/runtime.c and include/linux/pm_runtime.h:
void pm_runtime_init(struct device *dev);
- - initialize the device run-time PM fields in 'struct dev_pm_info'
+ - initialize the device runtime PM fields in 'struct dev_pm_info'
void pm_runtime_remove(struct device *dev);
- - make sure that the run-time PM of the device will be disabled after
+ - make sure that the runtime PM of the device will be disabled after
removing the device from device hierarchy
int pm_runtime_idle(struct device *dev);
@@ -289,9 +289,10 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
int pm_runtime_suspend(struct device *dev);
- execute the subsystem-level suspend callback for the device; returns 0 on
- success, 1 if the device's run-time PM status was already 'suspended', or
+ success, 1 if the device's runtime PM status was already 'suspended', or
error code on failure, where -EAGAIN or -EBUSY means it is safe to attempt
- to suspend the device again in future
+ to suspend the device again in future and -EACCES means that
+ 'power.disable_depth' is different from 0
int pm_runtime_autosuspend(struct device *dev);
- same as pm_runtime_suspend() except that the autosuspend delay is taken
@@ -301,10 +302,11 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
int pm_runtime_resume(struct device *dev);
- execute the subsystem-level resume callback for the device; returns 0 on
- success, 1 if the device's run-time PM status was already 'active' or
+ success, 1 if the device's runtime PM status was already 'active' or
error code on failure, where -EAGAIN means it may be safe to attempt to
resume the device again in future, but 'power.runtime_error' should be
- checked additionally
+ checked additionally, and -EACCES means that 'power.disable_depth' is
+ different from 0
int pm_request_idle(struct device *dev);
- submit a request to execute the subsystem-level idle callback for the
@@ -321,7 +323,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
device in future, where 'delay' is the time to wait before queuing up a
suspend work item in pm_wq, in milliseconds (if 'delay' is zero, the work
item is queued up immediately); returns 0 on success, 1 if the device's PM
- run-time status was already 'suspended', or error code if the request
+ runtime status was already 'suspended', or error code if the request
hasn't been scheduled (or queued up if 'delay' is 0); if the execution of
->runtime_suspend() is already scheduled and not yet expired, the new
value of 'delay' will be used as the time to wait
@@ -329,7 +331,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
int pm_request_resume(struct device *dev);
- submit a request to execute the subsystem-level resume callback for the
device (the request is represented by a work item in pm_wq); returns 0 on
- success, 1 if the device's run-time PM status was already 'active', or
+ success, 1 if the device's runtime PM status was already 'active', or
error code if the request hasn't been queued up
void pm_runtime_get_noresume(struct device *dev);
@@ -367,22 +369,32 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
pm_runtime_autosuspend(dev) and return its result
void pm_runtime_enable(struct device *dev);
- - enable the run-time PM helper functions to run the device bus type's
- run-time PM callbacks described in Section 2
+ - decrement the device's 'power.disable_depth' field; if that field is equal
+ to zero, the runtime PM helper functions can execute subsystem-level
+ callbacks described in Section 2 for the device
int pm_runtime_disable(struct device *dev);
- - prevent the run-time PM helper functions from running subsystem-level
- run-time PM callbacks for the device, make sure that all of the pending
- run-time PM operations on the device are either completed or canceled;
+ - increment the device's 'power.disable_depth' field (if the value of that
+ field was previously zero, this prevents subsystem-level runtime PM
+ callbacks from being run for the device), make sure that all of the pending
+ runtime PM operations on the device are either completed or canceled;
returns 1 if there was a resume request pending and it was necessary to
execute the subsystem-level resume callback for the device to satisfy that
request, otherwise 0 is returned
+ int pm_runtime_barrier(struct device *dev);
+ - check if there's a resume request pending for the device and resume it
+ (synchronously) in that case, cancel any other pending runtime PM requests
+ regarding it and wait for all runtime PM operations on it in progress to
+ complete; returns 1 if there was a resume request pending and it was
+ necessary to execute the subsystem-level resume callback for the device to
+ satisfy that request, otherwise 0 is returned
+
void pm_suspend_ignore_children(struct device *dev, bool enable);
- set/unset the power.ignore_children flag of the device
int pm_runtime_set_active(struct device *dev);
- - clear the device's 'power.runtime_error' flag, set the device's run-time
+ - clear the device's 'power.runtime_error' flag, set the device's runtime
PM status to 'active' and update its parent's counter of 'active'
children as appropriate (it is only valid to use this function if
'power.runtime_error' is set or 'power.disable_depth' is greater than
@@ -390,7 +402,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
which is not active and the 'power.ignore_children' flag of which is unset
void pm_runtime_set_suspended(struct device *dev);
- - clear the device's 'power.runtime_error' flag, set the device's run-time
+ - clear the device's 'power.runtime_error' flag, set the device's runtime
PM status to 'suspended' and update its parent's counter of 'active'
children as appropriate (it is only valid to use this function if
'power.runtime_error' is set or 'power.disable_depth' is greater than
@@ -400,6 +412,9 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
- return true if the device's runtime PM status is 'suspended' and its
'power.disable_depth' field is equal to zero, or false otherwise
+ bool pm_runtime_status_suspended(struct device *dev);
+ - return true if the device's runtime PM status is 'suspended'
+
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
counter (used by the /sys/devices/.../power/control interface to
@@ -411,7 +426,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
effectively prevent the device from being power managed at run time)
void pm_runtime_no_callbacks(struct device *dev);
- - set the power.no_callbacks flag for the device and remove the run-time
+ - set the power.no_callbacks flag for the device and remove the runtime
PM attributes from /sys/devices/.../power (or prevent them from being
added when the device is registered)
@@ -431,7 +446,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
void pm_runtime_set_autosuspend_delay(struct device *dev, int delay);
- set the power.autosuspend_delay value to 'delay' (expressed in
- milliseconds); if 'delay' is negative then run-time suspends are
+ milliseconds); if 'delay' is negative then runtime suspends are
prevented
unsigned long pm_runtime_autosuspend_expiration(struct device *dev);
@@ -470,35 +485,35 @@ pm_runtime_resume()
pm_runtime_get_sync()
pm_runtime_put_sync_suspend()
-5. Run-time PM Initialization, Device Probing and Removal
+5. Runtime PM Initialization, Device Probing and Removal
-Initially, the run-time PM is disabled for all devices, which means that the
-majority of the run-time PM helper funtions described in Section 4 will return
+Initially, the runtime PM is disabled for all devices, which means that the
+majority of the runtime PM helper funtions described in Section 4 will return
-EAGAIN until pm_runtime_enable() is called for the device.
-In addition to that, the initial run-time PM status of all devices is
+In addition to that, the initial runtime PM status of all devices is
'suspended', but it need not reflect the actual physical state of the device.
Thus, if the device is initially active (i.e. it is able to process I/O), its
-run-time PM status must be changed to 'active', with the help of
+runtime PM status must be changed to 'active', with the help of
pm_runtime_set_active(), before pm_runtime_enable() is called for the device.
-However, if the device has a parent and the parent's run-time PM is enabled,
+However, if the device has a parent and the parent's runtime PM is enabled,
calling pm_runtime_set_active() for the device will affect the parent, unless
the parent's 'power.ignore_children' flag is set. Namely, in that case the
parent won't be able to suspend at run time, using the PM core's helper
functions, as long as the child's status is 'active', even if the child's
-run-time PM is still disabled (i.e. pm_runtime_enable() hasn't been called for
+runtime PM is still disabled (i.e. pm_runtime_enable() hasn't been called for
the child yet or pm_runtime_disable() has been called for it). For this reason,
once pm_runtime_set_active() has been called for the device, pm_runtime_enable()
-should be called for it too as soon as reasonably possible or its run-time PM
+should be called for it too as soon as reasonably possible or its runtime PM
status should be changed back to 'suspended' with the help of
pm_runtime_set_suspended().
-If the default initial run-time PM status of the device (i.e. 'suspended')
+If the default initial runtime PM status of the device (i.e. 'suspended')
reflects the actual state of the device, its bus type's or its driver's
->probe() callback will likely need to wake it up using one of the PM core's
helper functions described in Section 4. In that case, pm_runtime_resume()
-should be used. Of course, for this purpose the device's run-time PM has to be
+should be used. Of course, for this purpose the device's runtime PM has to be
enabled earlier by calling pm_runtime_enable().
If the device bus type's or driver's ->probe() callback runs
@@ -529,33 +544,33 @@ The user space can effectively disallow the driver of the device to power manage
it at run time by changing the value of its /sys/devices/.../power/control
attribute to "on", which causes pm_runtime_forbid() to be called. In principle,
this mechanism may also be used by the driver to effectively turn off the
-run-time power management of the device until the user space turns it on.
-Namely, during the initialization the driver can make sure that the run-time PM
+runtime power management of the device until the user space turns it on.
+Namely, during the initialization the driver can make sure that the runtime PM
status of the device is 'active' and call pm_runtime_forbid(). It should be
noted, however, that if the user space has already intentionally changed the
value of /sys/devices/.../power/control to "auto" to allow the driver to power
manage the device at run time, the driver may confuse it by using
pm_runtime_forbid() this way.
-6. Run-time PM and System Sleep
+6. Runtime PM and System Sleep
-Run-time PM and system sleep (i.e., system suspend and hibernation, also known
+Runtime PM and system sleep (i.e., system suspend and hibernation, also known
as suspend-to-RAM and suspend-to-disk) interact with each other in a couple of
ways. If a device is active when a system sleep starts, everything is
straightforward. But what should happen if the device is already suspended?
-The device may have different wake-up settings for run-time PM and system sleep.
-For example, remote wake-up may be enabled for run-time suspend but disallowed
+The device may have different wake-up settings for runtime PM and system sleep.
+For example, remote wake-up may be enabled for runtime suspend but disallowed
for system sleep (device_may_wakeup(dev) returns 'false'). When this happens,
the subsystem-level system suspend callback is responsible for changing the
device's wake-up setting (it may leave that to the device driver's system
suspend routine). It may be necessary to resume the device and suspend it again
in order to do so. The same is true if the driver uses different power levels
-or other settings for run-time suspend and system sleep.
+or other settings for runtime suspend and system sleep.
-During system resume, devices generally should be brought back to full power,
-even if they were suspended before the system sleep began. There are several
-reasons for this, including:
+During system resume, the simplest approach is to bring all devices back to full
+power, even if they had been suspended before the system suspend began. There
+are several reasons for this, including:
* The device might need to switch power levels, wake-up settings, etc.
@@ -570,18 +585,50 @@ reasons for this, including:
* The device might need to be reset.
* Even though the device was suspended, if its usage counter was > 0 then most
- likely it would need a run-time resume in the near future anyway.
-
- * Always going back to full power is simplest.
+ likely it would need a runtime resume in the near future anyway.
-If the device was suspended before the sleep began, then its run-time PM status
-will have to be updated to reflect the actual post-system sleep status. The way
-to do this is:
+If the device had been suspended before the system suspend began and it's
+brought back to full power during resume, then its runtime PM status will have
+to be updated to reflect the actual post-system sleep status. The way to do
+this is:
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
+The PM core always increments the runtime usage counter before calling the
+->suspend() callback and decrements it after calling the ->resume() callback.
+Hence disabling runtime PM temporarily like this will not cause any runtime
+suspend attempts to be permanently lost. If the usage count goes to zero
+following the return of the ->resume() callback, the ->runtime_idle() callback
+will be invoked as usual.
+
+On some systems, however, system sleep is not entered through a global firmware
+or hardware operation. Instead, all hardware components are put into low-power
+states directly by the kernel in a coordinated way. Then, the system sleep
+state effectively follows from the states the hardware components end up in
+and the system is woken up from that state by a hardware interrupt or a similar
+mechanism entirely under the kernel's control. As a result, the kernel never
+gives control away and the states of all devices during resume are precisely
+known to it. If that is the case and none of the situations listed above takes
+place (in particular, if the system is not waking up from hibernation), it may
+be more efficient to leave the devices that had been suspended before the system
+suspend began in the suspended state.
+
+The PM core does its best to reduce the probability of race conditions between
+the runtime PM and system suspend/resume (and hibernation) callbacks by carrying
+out the following operations:
+
+ * During system suspend it calls pm_runtime_get_noresume() and
+ pm_runtime_barrier() for every device right before executing the
+ subsystem-level .suspend() callback for it. In addition to that it calls
+ pm_runtime_disable() for every device right after executing the
+ subsystem-level .suspend() callback for it.
+
+ * During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
+ for every device right before and right after executing the subsystem-level
+ .resume() callback for it, respectively.
+
7. Generic subsystem callbacks
Subsystems may wish to conserve code space by using the set of generic power
@@ -606,40 +653,68 @@ driver/base/power/generic_ops.c:
callback provided by its driver and return its result, or return 0 if not
defined
+ int pm_generic_suspend_noirq(struct device *dev);
+ - if pm_runtime_suspended(dev) returns "false", invoke the ->suspend_noirq()
+ callback provided by the device's driver and return its result, or return
+ 0 if not defined
+
int pm_generic_resume(struct device *dev);
- invoke the ->resume() callback provided by the driver of this device and,
if successful, change the device's runtime PM status to 'active'
+ int pm_generic_resume_noirq(struct device *dev);
+ - invoke the ->resume_noirq() callback provided by the driver of this device
+
int pm_generic_freeze(struct device *dev);
- if the device has not been suspended at run time, invoke the ->freeze()
callback provided by its driver and return its result, or return 0 if not
defined
+ int pm_generic_freeze_noirq(struct device *dev);
+ - if pm_runtime_suspended(dev) returns "false", invoke the ->freeze_noirq()
+ callback provided by the device's driver and return its result, or return
+ 0 if not defined
+
int pm_generic_thaw(struct device *dev);
- if the device has not been suspended at run time, invoke the ->thaw()
callback provided by its driver and return its result, or return 0 if not
defined
+ int pm_generic_thaw_noirq(struct device *dev);
+ - if pm_runtime_suspended(dev) returns "false", invoke the ->thaw_noirq()
+ callback provided by the device's driver and return its result, or return
+ 0 if not defined
+
int pm_generic_poweroff(struct device *dev);
- if the device has not been suspended at run time, invoke the ->poweroff()
callback provided by its driver and return its result, or return 0 if not
defined
+ int pm_generic_poweroff_noirq(struct device *dev);
+ - if pm_runtime_suspended(dev) returns "false", run the ->poweroff_noirq()
+ callback provided by the device's driver and return its result, or return
+ 0 if not defined
+
int pm_generic_restore(struct device *dev);
- invoke the ->restore() callback provided by the driver of this device and,
if successful, change the device's runtime PM status to 'active'
+ int pm_generic_restore_noirq(struct device *dev);
+ - invoke the ->restore_noirq() callback provided by the device's driver
+
These functions can be assigned to the ->runtime_idle(), ->runtime_suspend(),
-->runtime_resume(), ->suspend(), ->resume(), ->freeze(), ->thaw(), ->poweroff(),
-or ->restore() callback pointers in the subsystem-level dev_pm_ops structures.
+->runtime_resume(), ->suspend(), ->suspend_noirq(), ->resume(),
+->resume_noirq(), ->freeze(), ->freeze_noirq(), ->thaw(), ->thaw_noirq(),
+->poweroff(), ->poweroff_noirq(), ->restore(), ->restore_noirq() callback
+pointers in the subsystem-level dev_pm_ops structures.
If a subsystem wishes to use all of them at the same time, it can simply assign
the GENERIC_SUBSYS_PM_OPS macro, defined in include/linux/pm.h, to its
dev_pm_ops structure pointer.
Device drivers that wish to use the same function as a system suspend, freeze,
-poweroff and run-time suspend callback, and similarly for system resume, thaw,
-restore, and run-time resume, can achieve this with the help of the
+poweroff and runtime suspend callback, and similarly for system resume, thaw,
+restore, and runtime resume, can achieve this with the help of the
UNIVERSAL_DEV_PM_OPS macro defined in include/linux/pm.h (possibly setting its
last argument to NULL).
@@ -649,7 +724,7 @@ Some "devices" are only logical sub-devices of their parent and cannot be
power-managed on their own. (The prototype example is a USB interface. Entire
USB devices can go into low-power mode or send wake-up requests, but neither is
possible for individual interfaces.) The drivers for these devices have no
-need of run-time PM callbacks; if the callbacks did exist, ->runtime_suspend()
+need of runtime PM callbacks; if the callbacks did exist, ->runtime_suspend()
and ->runtime_resume() would always return 0 without doing anything else and
->runtime_idle() would always call pm_runtime_suspend().
@@ -657,7 +732,7 @@ Subsystems can tell the PM core about these devices by calling
pm_runtime_no_callbacks(). This should be done after the device structure is
initialized and before it is registered (although after device registration is
also okay). The routine will set the device's power.no_callbacks flag and
-prevent the non-debugging run-time PM sysfs attributes from being created.
+prevent the non-debugging runtime PM sysfs attributes from being created.
When power.no_callbacks is set, the PM core will not invoke the
->runtime_idle(), ->runtime_suspend(), or ->runtime_resume() callbacks.
@@ -665,7 +740,7 @@ Instead it will assume that suspends and resumes always succeed and that idle
devices should be suspended.
As a consequence, the PM core will never directly inform the device's subsystem
-or driver about run-time power changes. Instead, the driver for the device's
+or driver about runtime power changes. Instead, the driver for the device's
parent must take responsibility for telling the device's driver when the
parent's power state changes.
@@ -676,13 +751,13 @@ A device should be put in a low-power state only when there's some reason to
think it will remain in that state for a substantial time. A common heuristic
says that a device which hasn't been used for a while is liable to remain
unused; following this advice, drivers should not allow devices to be suspended
-at run-time until they have been inactive for some minimum period. Even when
+at runtime until they have been inactive for some minimum period. Even when
the heuristic ends up being non-optimal, it will still prevent devices from
"bouncing" too rapidly between low-power and full-power states.
The term "autosuspend" is an historical remnant. It doesn't mean that the
device is automatically suspended (the subsystem or driver still has to call
-the appropriate PM routines); rather it means that run-time suspends will
+the appropriate PM routines); rather it means that runtime suspends will
automatically be delayed until the desired period of inactivity has elapsed.
Inactivity is determined based on the power.last_busy field. Drivers should
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9adc278a22a..e04fa9d7637 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -642,6 +642,7 @@ config ARCH_SHMOBILE
select NO_IOPORT
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
+ select PM_GENERIC_DOMAINS if PM
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 334fb8871bc..943072d5a1d 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -32,7 +32,7 @@ static int omap1_pm_runtime_suspend(struct device *dev)
if (ret)
return ret;
- ret = pm_runtime_clk_suspend(dev);
+ ret = pm_clk_suspend(dev);
if (ret) {
pm_generic_runtime_resume(dev);
return ret;
@@ -45,24 +45,24 @@ static int omap1_pm_runtime_resume(struct device *dev)
{
dev_dbg(dev, "%s\n", __func__);
- pm_runtime_clk_resume(dev);
+ pm_clk_resume(dev);
return pm_generic_runtime_resume(dev);
}
-static struct dev_power_domain default_power_domain = {
+static struct dev_pm_domain default_pm_domain = {
.ops = {
.runtime_suspend = omap1_pm_runtime_suspend,
.runtime_resume = omap1_pm_runtime_resume,
USE_PLATFORM_PM_SLEEP_OPS
},
};
-#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#define OMAP1_PM_DOMAIN (&default_pm_domain)
#else
-#define OMAP1_PWR_DOMAIN NULL
+#define OMAP1_PM_DOMAIN NULL
#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
- .pwr_domain = OMAP1_PWR_DOMAIN,
+ .pm_domain = OMAP1_PM_DOMAIN,
.con_ids = { "ick", "fck", NULL, },
};
@@ -71,7 +71,7 @@ static int __init omap1_pm_runtime_init(void)
if (!cpu_class_is_omap1())
return -ENODEV;
- pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
+ pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 9a46d7773a4..2765cdc3152 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -119,6 +119,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
return PTR_ERR(od);
}
+ omap_device_disable_idle_on_suspend(od);
+
gpio_bank_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 1ac361b7b8c..466fc722fa0 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -805,6 +805,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
name, oh->name);
+ omap_device_disable_idle_on_suspend(od);
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
uart->irq = oh->mpu_irqs[0].irq;
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 803bc6edfca..b473b8efac6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1408,9 +1408,14 @@ static void __init ap4evb_init(void)
platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+ sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc1_device);
+ sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
+ sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
+
hdmi_init_pm_clock();
fsi_init_pm_clock();
sh7372_pm_init();
+ pm_clk_add(&fsi_device.dev, "spu2");
}
static void __init ap4evb_timer_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3802f2afabe..5b36b6c5b44 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1582,8 +1582,13 @@ static void __init mackerel_init(void)
platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+ sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device);
+ sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device);
+ sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device);
+
hdmi_init_pm_clock();
sh7372_pm_init();
+ pm_clk_add(&fsi_device.dev, "spu2");
}
static void __init mackerel_timer_init(void)
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index c0800d83971..91f5779abdd 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -662,6 +662,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
+ CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]),
};
void __init sh7372_clock_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index df20d767017..ce595cee86c 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -12,6 +12,7 @@
#define __ASM_SH7372_H__
#include <linux/sh_clk.h>
+#include <linux/pm_domain.h>
/*
* Pin Function Controller:
@@ -470,4 +471,32 @@ extern struct clk sh7372_fsibck_clk;
extern struct clk sh7372_fsidiva_clk;
extern struct clk sh7372_fsidivb_clk;
+struct platform_device;
+
+struct sh7372_pm_domain {
+ struct generic_pm_domain genpd;
+ unsigned int bit_shift;
+};
+
+static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d)
+{
+ return container_of(d, struct sh7372_pm_domain, genpd);
+}
+
+#ifdef CONFIG_PM
+extern struct sh7372_pm_domain sh7372_a4lc;
+extern struct sh7372_pm_domain sh7372_a4mp;
+extern struct sh7372_pm_domain sh7372_d4;
+extern struct sh7372_pm_domain sh7372_a3rv;
+extern struct sh7372_pm_domain sh7372_a3ri;
+extern struct sh7372_pm_domain sh7372_a3sg;
+
+extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd);
+extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
+ struct platform_device *pdev);
+#else
+#define sh7372_init_pm_domain(pd) do { } while(0)
+#define sh7372_add_device_to_domain(pd, pdev) do { } while(0)
+#endif /* CONFIG_PM */
+
#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c
index 8e4aadf14c9..933fb411be0 100644
--- a/arch/arm/mach-shmobile/pm-sh7372.c
+++ b/arch/arm/mach-shmobile/pm-sh7372.c
@@ -15,16 +15,176 @@
#include <linux/list.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
#include <mach/common.h>
+#include <mach/sh7372.h>
#define SMFRAM 0xe6a70000
#define SYSTBCR 0xe6150024
#define SBAR 0xe6180020
#define APARMBAREA 0xe6f10020
+#define SPDCR 0xe6180008
+#define SWUCR 0xe6180014
+#define PSTR 0xe6180080
+
+#define PSTR_RETRIES 100
+#define PSTR_DELAY_US 10
+
+#ifdef CONFIG_PM
+
+static int pd_power_down(struct generic_pm_domain *genpd)
+{
+ struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
+ unsigned int mask = 1 << sh7372_pd->bit_shift;
+
+ if (__raw_readl(PSTR) & mask) {
+ unsigned int retry_count;
+
+ __raw_writel(mask, SPDCR);
+
+ for (retry_count = PSTR_RETRIES; retry_count; retry_count--) {
+ if (!(__raw_readl(SPDCR) & mask))
+ break;
+ cpu_relax();
+ }
+ }
+
+ pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n",
+ mask, __raw_readl(PSTR));
+
+ return 0;
+}
+
+static int pd_power_up(struct generic_pm_domain *genpd)
+{
+ struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
+ unsigned int mask = 1 << sh7372_pd->bit_shift;
+ unsigned int retry_count;
+ int ret = 0;
+
+ if (__raw_readl(PSTR) & mask)
+ goto out;
+
+ __raw_writel(mask, SWUCR);
+
+ for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
+ if (!(__raw_readl(SWUCR) & mask))
+ goto out;
+ if (retry_count > PSTR_RETRIES)
+ udelay(PSTR_DELAY_US);
+ else
+ cpu_relax();
+ }
+ if (__raw_readl(SWUCR) & mask)
+ ret = -EIO;
+
+ out:
+ pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n",
+ mask, __raw_readl(PSTR));
+
+ return ret;
+}
+
+static int pd_power_up_a3rv(struct generic_pm_domain *genpd)
+{
+ int ret = pd_power_up(genpd);
+
+ /* force A4LC on after A3RV has been requested on */
+ pm_genpd_poweron(&sh7372_a4lc.genpd);
+
+ return ret;
+}
+
+static int pd_power_down_a3rv(struct generic_pm_domain *genpd)
+{
+ int ret = pd_power_down(genpd);
+
+ /* try to power down A4LC after A3RV is requested off */
+ genpd_queue_power_off_work(&sh7372_a4lc.genpd);
+
+ return ret;
+}
+
+static int pd_power_down_a4lc(struct generic_pm_domain *genpd)
+{
+ /* only power down A4LC if A3RV is off */
+ if (!(__raw_readl(PSTR) & (1 << sh7372_a3rv.bit_shift)))
+ return pd_power_down(genpd);
+
+ return -EBUSY;
+}
+
+static bool pd_active_wakeup(struct device *dev)
+{
+ return true;
+}
+
+void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
+{
+ struct generic_pm_domain *genpd = &sh7372_pd->genpd;
+
+ pm_genpd_init(genpd, NULL, false);
+ genpd->stop_device = pm_clk_suspend;
+ genpd->start_device = pm_clk_resume;
+ genpd->active_wakeup = pd_active_wakeup;
+
+ if (sh7372_pd == &sh7372_a4lc) {
+ genpd->power_off = pd_power_down_a4lc;
+ genpd->power_on = pd_power_up;
+ } else if (sh7372_pd == &sh7372_a3rv) {
+ genpd->power_off = pd_power_down_a3rv;
+ genpd->power_on = pd_power_up_a3rv;
+ } else {
+ genpd->power_off = pd_power_down;
+ genpd->power_on = pd_power_up;
+ }
+ genpd->power_on(&sh7372_pd->genpd);
+}
+
+void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
+ struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+
+ if (!dev->power.subsys_data) {
+ pm_clk_init(dev);
+ pm_clk_add(dev, NULL);
+ }
+ pm_genpd_add_device(&sh7372_pd->genpd, dev);
+}
+
+struct sh7372_pm_domain sh7372_a4lc = {
+ .bit_shift = 1,
+};
+
+struct sh7372_pm_domain sh7372_a4mp = {
+ .bit_shift = 2,
+};
+
+struct sh7372_pm_domain sh7372_d4 = {
+ .bit_shift = 3,
+};
+
+struct sh7372_pm_domain sh7372_a3rv = {
+ .bit_shift = 6,
+};
+
+struct sh7372_pm_domain sh7372_a3ri = {
+ .bit_shift = 8,
+};
+
+struct sh7372_pm_domain sh7372_a3sg = {
+ .bit_shift = 13,
+};
+
+#endif /* CONFIG_PM */
+
static void sh7372_enter_core_standby(void)
{
void __iomem *smfram = (void __iomem *)SMFRAM;
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
index 2d1b67a59e4..6ec454e1e06 100644
--- a/arch/arm/mach-shmobile/pm_runtime.c
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/sh_clk.h>
@@ -28,31 +29,38 @@ static int default_platform_runtime_idle(struct device *dev)
return pm_runtime_suspend(dev);
}
-static struct dev_power_domain default_power_domain = {
+static struct dev_pm_domain default_pm_domain = {
.ops = {
- .runtime_suspend = pm_runtime_clk_suspend,
- .runtime_resume = pm_runtime_clk_resume,
+ .runtime_suspend = pm_clk_suspend,
+ .runtime_resume = pm_clk_resume,
.runtime_idle = default_platform_runtime_idle,
USE_PLATFORM_PM_SLEEP_OPS
},
};
-#define DEFAULT_PWR_DOMAIN_PTR (&default_power_domain)
+#define DEFAULT_PM_DOMAIN_PTR (&default_pm_domain)
#else
-#define DEFAULT_PWR_DOMAIN_PTR NULL
+#define DEFAULT_PM_DOMAIN_PTR NULL
#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
- .pwr_domain = DEFAULT_PWR_DOMAIN_PTR,
+ .pm_domain = DEFAULT_PM_DOMAIN_PTR,
.con_ids = { NULL, },
};
static int __init sh_pm_runtime_init(void)
{
- pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
+ pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier);
return 0;
}
core_initcall(sh_pm_runtime_init);
+
+static int __init sh_pm_runtime_late_init(void)
+{
+ pm_genpd_poweroff_unused();
+ return 0;
+}
+late_initcall(sh_pm_runtime_late_init);
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index cd807eea69e..79f0413d872 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -841,11 +841,22 @@ static struct platform_device *sh7372_late_devices[] __initdata = {
void __init sh7372_add_standard_devices(void)
{
+ sh7372_init_pm_domain(&sh7372_a4lc);
+ sh7372_init_pm_domain(&sh7372_a4mp);
+ sh7372_init_pm_domain(&sh7372_d4);
+ sh7372_init_pm_domain(&sh7372_a3rv);
+ sh7372_init_pm_domain(&sh7372_a3ri);
+ sh7372_init_pm_domain(&sh7372_a3sg);
+
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
platform_add_devices(sh7372_late_devices,
ARRAY_SIZE(sh7372_late_devices));
+
+ sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device);
+ sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device);
+ sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device);
}
void __init sh7372_add_early_devices(void)
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index e4c349ff9fd..ee405b36df4 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -44,6 +44,10 @@ extern struct device omap_device_parent;
#define OMAP_DEVICE_STATE_IDLE 2
#define OMAP_DEVICE_STATE_SHUTDOWN 3
+/* omap_device.flags values */
+#define OMAP_DEVICE_SUSPENDED BIT(0)
+#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
+
/**
* struct omap_device - omap_device wrapper for platform_devices
* @pdev: platform_device
@@ -73,6 +77,7 @@ struct omap_device {
s8 pm_lat_level;
u8 hwmods_cnt;
u8 _state;
+ u8 flags;
};
/* Device driver interface (call via platform_data fn ptrs) */
@@ -117,6 +122,10 @@ int omap_device_enable_hwmods(struct omap_device *od);
int omap_device_disable_clocks(struct omap_device *od);
int omap_device_enable_clocks(struct omap_device *od);
+static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
+{
+ od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
/*
* Entries should be kept in latency order ascending
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 49fc0df0c21..2526fa312b8 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -537,6 +537,7 @@ int omap_early_device_register(struct omap_device *od)
return 0;
}
+#ifdef CONFIG_PM_RUNTIME
static int _od_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -563,13 +564,55 @@ static int _od_runtime_resume(struct device *dev)
return pm_generic_runtime_resume(dev);
}
+#endif
-static struct dev_power_domain omap_device_power_domain = {
+#ifdef CONFIG_SUSPEND
+static int _od_suspend_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+ int ret;
+
+ if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
+ return pm_generic_suspend_noirq(dev);
+
+ ret = pm_generic_suspend_noirq(dev);
+
+ if (!ret && !pm_runtime_status_suspended(dev)) {
+ if (pm_generic_runtime_suspend(dev) == 0) {
+ omap_device_idle(pdev);
+ od->flags |= OMAP_DEVICE_SUSPENDED;
+ }
+ }
+
+ return ret;
+}
+
+static int _od_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct omap_device *od = to_omap_device(pdev);
+
+ if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND)
+ return pm_generic_resume_noirq(dev);
+
+ if ((od->flags & OMAP_DEVICE_SUSPENDED) &&
+ !pm_runtime_status_suspended(dev)) {
+ od->flags &= ~OMAP_DEVICE_SUSPENDED;
+ omap_device_enable(pdev);
+ pm_generic_runtime_resume(dev);
+ }
+
+ return pm_generic_resume_noirq(dev);
+}
+#endif
+
+static struct dev_pm_domain omap_device_pm_domain = {
.ops = {
- .runtime_suspend = _od_runtime_suspend,
- .runtime_idle = _od_runtime_idle,
- .runtime_resume = _od_runtime_resume,
+ SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
+ _od_runtime_idle)
USE_PLATFORM_PM_SLEEP_OPS
+ SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
}
};
@@ -586,7 +629,7 @@ int omap_device_register(struct omap_device *od)
pr_debug("omap_device: %s: registering\n", od->pdev.name);
od->pdev.dev.parent = &omap_device_parent;
- od->pdev.dev.pwr_domain = &omap_device_power_domain;
+ od->pdev.dev.pm_domain = &omap_device_pm_domain;
return platform_device_register(&od->pdev);
}
diff --git a/arch/sh/kernel/cpu/shmobile/pm_runtime.c b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
index 64c807c3920..bf280c812d2 100644
--- a/arch/sh/kernel/cpu/shmobile/pm_runtime.c
+++ b/arch/sh/kernel/cpu/shmobile/pm_runtime.c
@@ -256,7 +256,7 @@ out:
return ret;
}
-static struct dev_power_domain default_power_domain = {
+static struct dev_pm_domain default_pm_domain = {
.ops = {
.runtime_suspend = default_platform_runtime_suspend,
.runtime_resume = default_platform_runtime_resume,
@@ -285,7 +285,7 @@ static int platform_bus_notify(struct notifier_block *nb,
hwblk_disable(hwblk_info, hwblk);
/* make sure driver re-inits itself once */
__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
- dev->pwr_domain = &default_power_domain;
+ dev->pm_domain = &default_pm_domain;
break;
/* TODO: add BUS_NOTIFY_BIND_DRIVER and increase idle count */
case BUS_NOTIFY_BOUND_DRIVER:
@@ -299,7 +299,7 @@ static int platform_bus_notify(struct notifier_block *nb,
__set_bit(PDEV_ARCHDATA_FLAG_INIT, &pdev->archdata.flags);
break;
case BUS_NOTIFY_DEL_DEVICE:
- dev->pwr_domain = NULL;
+ dev->pm_domain = NULL;
break;
}
return 0;
diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index 3647e114d0e..2639ae79a37 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PM_SLEEP) += main.o wakeup.o
obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
obj-$(CONFIG_PM_OPP) += opp.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS) += domain.o
obj-$(CONFIG_HAVE_CLK) += clock_ops.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG \ No newline at end of file
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index ad367c4139b..a846b2f95cf 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -15,9 +15,9 @@
#include <linux/slab.h>
#include <linux/err.h>
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
-struct pm_runtime_clk_data {
+struct pm_clk_data {
struct list_head clock_list;
struct mutex lock;
};
@@ -36,25 +36,25 @@ struct pm_clock_entry {
enum pce_status status;
};
-static struct pm_runtime_clk_data *__to_prd(struct device *dev)
+static struct pm_clk_data *__to_pcd(struct device *dev)
{
return dev ? dev->power.subsys_data : NULL;
}
/**
- * pm_runtime_clk_add - Start using a device clock for runtime PM.
- * @dev: Device whose clock is going to be used for runtime PM.
+ * pm_clk_add - Start using a device clock for power management.
+ * @dev: Device whose clock is going to be used for power management.
* @con_id: Connection ID of the clock.
*
* Add the clock represented by @con_id to the list of clocks used for
- * the runtime PM of @dev.
+ * the power management of @dev.
*/
-int pm_runtime_clk_add(struct device *dev, const char *con_id)
+int pm_clk_add(struct device *dev, const char *con_id)
{
- struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
- if (!prd)
+ if (!pcd)
return -EINVAL;
ce = kzalloc(sizeof(*ce), GFP_KERNEL);
@@ -73,20 +73,20 @@ int pm_runtime_clk_add(struct device *dev, const char *con_id)
}
}
- mutex_lock(&prd->lock);
- list_add_tail(&ce->node, &prd->clock_list);
- mutex_unlock(&prd->lock);
+ mutex_lock(&pcd->lock);
+ list_add_tail(&ce->node, &pcd->clock_list);
+ mutex_unlock(&pcd->lock);
return 0;
}
/**
- * __pm_runtime_clk_remove - Destroy runtime PM clock entry.
- * @ce: Runtime PM clock entry to destroy.
+ * __pm_clk_remove - Destroy PM clock entry.
+ * @ce: PM clock entry to destroy.
*
- * This routine must be called under the mutex protecting the runtime PM list
- * of clocks corresponding the the @ce's device.
+ * This routine must be called under the mutex protecting the PM list of clocks
+ * corresponding the the @ce's device.
*/
-static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
+static void __pm_clk_remove(struct pm_clock_entry *ce)
{
if (!ce)
return;
@@ -108,95 +108,99 @@ static void __pm_runtime_clk_remove(struct pm_clock_entry *ce)
}
/**
- * pm_runtime_clk_remove - Stop using a device clock for runtime PM.
- * @dev: Device whose clock should not be used for runtime PM any more.
+ * pm_clk_remove - Stop using a device clock for power management.
+ * @dev: Device whose clock should not be used for PM any more.
* @con_id: Connection ID of the clock.
*
* Remove the clock represented by @con_id from the list of clocks used for
- * the runtime PM of @dev.
+ * the power management of @dev.
*/
-void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+void pm_clk_remove(struct device *dev, const char *con_id)
{
- struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
- if (!prd)
+ if (!pcd)
return;
- mutex_lock(&prd->lock);
+ mutex_lock(&pcd->lock);
- list_for_each_entry(ce, &prd->clock_list, node) {
+ list_for_each_entry(ce, &pcd->clock_list, node) {
if (!con_id && !ce->con_id) {
- __pm_runtime_clk_remove(ce);
+ __pm_clk_remove(ce);
break;
} else if (!con_id || !ce->con_id) {
continue;
} else if (!strcmp(con_id, ce->con_id)) {
- __pm_runtime_clk_remove(ce);
+ __pm_clk_remove(ce);
break;
}
}
- mutex_unlock(&prd->lock);
+ mutex_unlock(&pcd->lock);
}
/**
- * pm_runtime_clk_init - Initialize a device's list of runtime PM clocks.
- * @dev: Device to initialize the list of runtime PM clocks for.
+ * pm_clk_init - Initialize a device's list of power management clocks.
+ * @dev: Device to initialize the list of PM clocks for.
*
- * Allocate a struct pm_runtime_clk_data object, initialize its lock member and
+ * Allocate a struct pm_clk_data object, initialize its lock member and
* make the @dev's power.subsys_data field point to it.
*/
-int pm_runtime_clk_init(struct device *dev)
+int pm_clk_init(struct device *dev)
{
- struct pm_runtime_clk_data *prd;
+ struct pm_clk_data *pcd;
- prd = kzalloc(sizeof(*prd), GFP_KERNEL);
- if (!prd) {
- dev_err(dev, "Not enough memory fo runtime PM data.\n");
+ pcd = kzalloc(sizeof(*pcd), GFP_KERNEL);
+ if (!pcd) {
+ dev_err(dev, "Not enough memory for PM clock data.\n");
return -ENOMEM;
}
- INIT_LIST_HEAD(&prd->clock_list);
- mutex_init(&prd->lock);
- dev->power.subsys_data = prd;
+ INIT_LIST_HEAD(&pcd->clock_list);
+ mutex_init(&pcd->lock);
+ dev->power.subsys_data = pcd;
return 0;
}
/**
- * pm_runtime_clk_destroy - Destroy a device's list of runtime PM clocks.
- * @dev: Device to destroy the list of runtime PM clocks for.
+ * pm_clk_destroy - Destroy a device's list of power management clocks.
+ * @dev: Device to destroy the list of PM clocks for.
*
* Clear the @dev's power.subsys_data field, remove the list of clock entries
- * from the struct pm_runtime_clk_data object pointed to by it before and free
+ * from the struct pm_clk_data object pointed to by it before and free
* that object.
*/
-void pm_runtime_clk_destroy(struct device *dev)
+void pm_clk_destroy(struct device *dev)
{
- struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce, *c;
- if (!prd)
+ if (!pcd)
return;
dev->power.subsys_data = NULL;
- mutex_lock(&prd->lock);
+ mutex_lock(&pcd->lock);
- list_for_each_entry_safe_reverse(ce, c, &prd->clock_list, node)
- __pm_runtime_clk_remove(ce);
+ list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
+ __pm_clk_remove(ce);
- mutex_unlock(&prd->lock);
+ mutex_unlock(&pcd->lock);
- kfree(prd);
+ kfree(pcd);
}
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_RUNTIME
+
/**
- * pm_runtime_clk_acquire - Acquire a device clock.
+ * pm_clk_acquire - Acquire a device clock.
* @dev: Device whose clock is to be acquired.
* @con_id: Connection ID of the clock.
*/
-static void pm_runtime_clk_acquire(struct device *dev,
+static void pm_clk_acquire(struct device *dev,
struct pm_clock_entry *ce)
{
ce->clk = clk_get(dev, ce->con_id);
@@ -209,24 +213,24 @@ static void pm_runtime_clk_acquire(struct device *dev,
}
/**
- * pm_runtime_clk_suspend - Disable clocks in a device's runtime PM clock list.
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
* @dev: Device to disable the clocks for.
*/
-int pm_runtime_clk_suspend(struct device *dev)
+int pm_clk_suspend(struct device *dev)
{
- struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
dev_dbg(dev, "%s()\n", __func__);
- if (!prd)
+ if (!pcd)
return 0;
- mutex_lock(&prd->lock);
+ mutex_lock(&pcd->lock);
- list_for_each_entry_reverse(ce, &prd->clock_list, node) {
+ list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
if (ce->status == PCE_STATUS_NONE)
- pm_runtime_clk_acquire(dev, ce);
+ pm_clk_acquire(dev, ce);
if (ce->status < PCE_STATUS_ERROR) {
clk_disable(ce->clk);
@@ -234,30 +238,30 @@ int pm_runtime_clk_suspend(struct device *dev)
}
}
- mutex_unlock(&prd->lock);
+ mutex_unlock(&pcd->lock);
return 0;
}
/**
- * pm_runtime_clk_resume - Enable clocks in a device's runtime PM clock list.
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
* @dev: Device to enable the clocks for.
*/
-int pm_runtime_clk_resume(struct device *dev)
+int pm_clk_resume(struct device *dev)
{
- struct pm_runtime_clk_data *prd = __to_prd(dev);
+ struct pm_clk_data *pcd = __to_pcd(dev);
struct pm_clock_entry *ce;
dev_dbg(dev, "%s()\n", __func__);
- if (!prd)
+ if (!pcd)
return 0;
- mutex_lock(&prd->lock);
+ mutex_lock(&pcd->lock);
- list_for_each_entry(ce, &prd->clock_list, node) {
+ list_for_each_entry(ce, &pcd->clock_list, node) {
if (ce->status == PCE_STATUS_NONE)
- pm_runtime_clk_acquire(dev, ce);
+ pm_clk_acquire(dev, ce);
if (ce->status < PCE_STATUS_ERROR) {
clk_enable(ce->clk);
@@ -265,28 +269,28 @@ int pm_runtime_clk_resume(struct device *dev)
}
}
- mutex_unlock(&prd->lock);
+ mutex_unlock(&pcd->lock);
return 0;
}
/**
- * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * pm_clk_notify - Notify routine for device addition and removal.
* @nb: Notifier block object this function is a member of.
* @action: Operation being carried out by the caller.
* @data: Device the routine is being run for.
*
* For this function to work, @nb must be a member of an object of type
* struct pm_clk_notifier_block containing all of the requisite data.
- * Specifically, the pwr_domain member of that object is copied to the device's
- * pwr_domain field and its con_ids member is used to populate the device's list
- * of runtime PM clocks, depending on @action.
+ * Specifically, the pm_domain member of that object is copied to the device's
+ * pm_domain field and its con_ids member is used to populate the device's list
+ * of PM clocks, depending on @action.
*
- * If the device's pwr_domain field is already populated with a value different
+ * If the device's pm_domain field is already populated with a value different
* from the one stored in the struct pm_clk_notifier_block object, the function
* does nothing.
*/
-static int pm_runtime_clk_notify(struct notifier_block *nb,
+static int pm_clk_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct pm_clk_notifier_block *clknb;
@@ -300,28 +304,28 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
- if (dev->pwr_domain)
+ if (dev->pm_domain)
break;
- error = pm_runtime_clk_init(dev);
+ error = pm_clk_init(dev);
if (error)
break;
- dev->pwr_domain = clknb->pwr_domain;
+ dev->pm_domain = clknb->pm_domain;
if (clknb->con_ids[0]) {
for (con_id = clknb->con_ids; *con_id; con_id++)
- pm_runtime_clk_add(dev, *con_id);
+ pm_clk_add(dev, *con_id);
} else {
- pm_runtime_clk_add(dev, NULL);
+ pm_clk_add(dev, NULL);
}
break;
case BUS_NOTIFY_DEL_DEVICE:
- if (dev->pwr_domain != clknb->pwr_domain)
+ if (dev->pm_domain != clknb->pm_domain)
break;
- dev->pwr_domain = NULL;
- pm_runtime_clk_destroy(dev);
+ dev->pm_domain = NULL;
+ pm_clk_destroy(dev);
break;
}
@@ -330,6 +334,60 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
#else /* !CONFIG_PM_RUNTIME */
+#ifdef CONFIG_PM
+
+/**
+ * pm_clk_suspend - Disable clocks in a device's PM clock list.
+ * @dev: Device to disable the clocks for.
+ */
+int pm_clk_suspend(struct device *dev)
+{
+ struct pm_clk_data *pcd = __to_pcd(dev);
+ struct pm_clock_entry *ce;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ /* If there is no driver, the clocks are already disabled. */
+ if (!pcd || !dev->driver)
+ return 0;
+
+ mutex_lock(&pcd->lock);
+
+ list_for_each_entry_reverse(ce, &pcd->clock_list, node)
+ clk_disable(ce->clk);
+
+ mutex_unlock(&pcd->lock);
+
+ return 0;
+}
+
+/**
+ * pm_clk_resume - Enable clocks in a device's PM clock list.
+ * @dev: Device to enable the clocks for.
+ */
+int pm_clk_resume(struct device *dev)
+{
+ struct pm_clk_data *pcd = __to_pcd(dev);
+ struct pm_clock_entry *ce;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ /* If there is no driver, the clocks should remain disabled. */
+ if (!pcd || !dev->driver)
+ return 0;
+
+ mutex_lock(&pcd->lock);
+
+ list_for_each_entry(ce, &pcd->clock_list, node)
+ clk_enable(ce->clk);
+
+ mutex_unlock(&pcd->lock);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
/**
* enable_clock - Enable a device clock.
* @dev: Device whose clock is to be enabled.
@@ -365,7 +423,7 @@ static void disable_clock(struct device *dev, const char *con_id)
}
/**
- * pm_runtime_clk_notify - Notify routine for device addition and removal.
+ * pm_clk_notify - Notify routine for device addition and removal.
* @nb: Notifier block object this function is a member of.
* @action: Operation being carried out by the caller.
* @data: Device the routine is being run for.
@@ -375,7 +433,7 @@ static void disable_clock(struct device *dev, const char *con_id)
* Specifically, the con_ids member of that object is used to enable or disable
* the device's clocks, depending on @action.
*/
-static int pm_runtime_clk_notify(struct notifier_block *nb,
+static int pm_clk_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct pm_clk_notifier_block *clknb;
@@ -411,21 +469,21 @@ static int pm_runtime_clk_notify(struct notifier_block *nb,
#endif /* !CONFIG_PM_RUNTIME */
/**
- * pm_runtime_clk_add_notifier - Add bus type notifier for runtime PM clocks.
+ * pm_clk_add_notifier - Add bus type notifier for power management clocks.
* @bus: Bus type to add the notifier to.
* @clknb: Notifier to be added to the given bus type.
*
* The nb member of @clknb is not expected to be initialized and its
- * notifier_call member will be replaced with pm_runtime_clk_notify(). However,
+ * notifier_call member will be replaced with pm_clk_notify(). However,
* the remaining members of @clknb should be populated prior to calling this
* routine.
*/
-void pm_runtime_clk_add_notifier(struct bus_type *bus,
+void pm_clk_add_notifier(struct bus_type *bus,
struct pm_clk_notifier_block *clknb)
{
if (!bus || !clknb)
return;
- clknb->nb.notifier_call = pm_runtime_clk_notify;
+ clknb->nb.notifier_call = pm_clk_notify;
bus_register_notifier(bus, &clknb->nb);
}
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
new file mode 100644
index 00000000000..be8714aa9dd
--- /dev/null
+++ b/drivers/base/power/domain.c
@@ -0,0 +1,1273 @@
+/*
+ * drivers/base/power/domain.c - Common code related to device power domains.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+
+static LIST_HEAD(gpd_list);
+static DEFINE_MUTEX(gpd_list_lock);
+
+#ifdef CONFIG_PM
+
+static struct generic_pm_domain *dev_to_genpd(struct device *dev)
+{
+ if (IS_ERR_OR_NULL(dev->pm_domain))
+ return ERR_PTR(-EINVAL);
+
+ return pd_to_genpd(dev->pm_domain);
+}
+
+static void genpd_sd_counter_dec(struct generic_pm_domain *genpd)
+{
+ if (!WARN_ON(genpd->sd_count == 0))
+ genpd->sd_count--;
+}
+
+static void genpd_acquire_lock(struct generic_pm_domain *genpd)
+{
+ DEFINE_WAIT(wait);
+
+ mutex_lock(&genpd->lock);
+ /*
+ * Wait for the domain to transition into either the active,
+ * or the power off state.
+ */
+ for (;;) {
+ prepare_to_wait(&genpd->status_wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ if (genpd->status == GPD_STATE_ACTIVE
+ || genpd->status == GPD_STATE_POWER_OFF)
+ break;
+ mutex_unlock(&genpd->lock);
+
+ schedule();
+
+ mutex_lock(&genpd->lock);
+ }
+ finish_wait(&genpd->status_wait_queue, &wait);
+}
+
+static void genpd_release_lock(struct generic_pm_domain *genpd)
+{
+ mutex_unlock(&genpd->lock);
+}
+
+static void genpd_set_active(struct generic_pm_domain *genpd)
+{
+ if (genpd->resume_count == 0)
+ genpd->status = GPD_STATE_ACTIVE;
+}
+
+/**
+ * pm_genpd_poweron - Restore power to a given PM domain and its parents.
+ * @genpd: PM domain to power up.
+ *
+ * Restore power to @genpd and all of its parents so that it is possible to
+ * resume a device belonging to it.
+ */
+int pm_genpd_poweron(struct generic_pm_domain *genpd)
+{
+ struct generic_pm_domain *parent = genpd->parent;
+ DEFINE_WAIT(wait);
+ int ret = 0;
+
+ start:
+ if (parent) {
+ genpd_acquire_lock(parent);
+ mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
+ } else {
+ mutex_lock(&genpd->lock);
+ }
+
+ if (genpd->status == GPD_STATE_ACTIVE
+ || (genpd->prepared_count > 0 && genpd->suspend_power_off))
+ goto out;
+
+ if (genpd->status != GPD_STATE_POWER_OFF) {
+ genpd_set_active(genpd);
+ goto out;
+ }
+
+ if (parent && parent->status != GPD_STATE_ACTIVE) {
+ mutex_unlock(&genpd->lock);
+ genpd_release_lock(parent);
+
+ ret = pm_genpd_poweron(parent);
+ if (ret)
+ return ret;
+
+ goto start;
+ }
+
+ if (genpd->power_on) {
+ int ret = genpd->power_on(genpd);
+ if (ret)
+ goto out;
+ }
+
+ genpd_set_active(genpd);
+ if (parent)
+ parent->sd_count++;
+
+ out:
+ mutex_unlock(&genpd->lock);
+ if (parent)
+ genpd_release_lock(parent);
+
+ return ret;
+}
+
+#endif /* CONFIG_PM */
+
+#ifdef CONFIG_PM_RUNTIME
+
+/**
+ * __pm_genpd_save_device - Save the pre-suspend state of a device.
+ * @dle: Device list entry of the device to save the state of.
+ * @genpd: PM domain the device belongs to.
+ */
+static int __pm_genpd_save_device(struct dev_list_entry *dle,
+ struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct device *dev = dle->dev;
+ struct device_driver *drv = dev->driver;
+ int ret = 0;
+
+ if (dle->need_restore)
+ return 0;
+
+ mutex_unlock(&genpd->lock);
+
+ if (drv && drv->pm && drv->pm->runtime_suspend) {
+ if (genpd->start_device)
+ genpd->start_device(dev);
+
+ ret = drv->pm->runtime_suspend(dev);
+
+ if (genpd->stop_device)
+ genpd->stop_device(dev);
+ }
+
+ mutex_lock(&genpd->lock);
+
+ if (!ret)
+ dle->need_restore = true;
+
+ return ret;
+}
+
+/**
+ * __pm_genpd_restore_device - Restore the pre-suspend state of a device.
+ * @dle: Device list entry of the device to restore the state of.
+ * @genpd: PM domain the device belongs to.
+ */
+static void __pm_genpd_restore_device(struct dev_list_entry *dle,
+ struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct device *dev = dle->dev;
+ struct device_driver *drv = dev->driver;
+
+ if (!dle->need_restore)
+ return;
+
+ mutex_unlock(&genpd->lock);
+
+ if (drv && drv->pm && drv->pm->runtime_resume) {
+ if (genpd->start_device)
+ genpd->start_device(dev);
+
+ drv->pm->runtime_resume(dev);
+
+ if (genpd->stop_device)
+ genpd->stop_device(dev);
+ }
+
+ mutex_lock(&genpd->lock);
+
+ dle->need_restore = false;
+}
+
+/**
+ * genpd_abort_poweroff - Check if a PM domain power off should be aborted.
+ * @genpd: PM domain to check.
+ *
+ * Return true if a PM domain's status changed to GPD_STATE_ACTIVE during
+ * a "power off" operation, which means that a "power on" has occured in the
+ * meantime, or if its resume_count field is different from zero, which means
+ * that one of its devices has been resumed in the meantime.
+ */
+static bool genpd_abort_poweroff(struct generic_pm_domain *genpd)
+{
+ return genpd->status == GPD_STATE_ACTIVE || genpd->resume_count > 0;
+}
+
+/**
+ * genpd_queue_power_off_work - Queue up the execution of pm_genpd_poweroff().
+ * @genpd: PM domait to power off.
+ *
+ * Queue up the execution of pm_genpd_poweroff() unless it's already been done
+ * before.
+ */
+void genpd_queue_power_off_work(struct generic_pm_domain *genpd)
+{
+ if (!work_pending(&genpd->power_off_work))
+ queue_work(pm_wq, &genpd->power_off_work);
+}
+
+/**
+ * pm_genpd_poweroff - Remove power from a given PM domain.
+ * @genpd: PM domain to power down.
+ *
+ * If all of the @genpd's devices have been suspended and all of its subdomains
+ * have been powered down, run the runtime suspend callbacks provided by all of
+ * the @genpd's devices' drivers and remove power from @genpd.
+ */
+static int pm_genpd_poweroff(struct generic_pm_domain *genpd)
+ __releases(&genpd->lock) __acquires(&genpd->lock)
+{
+ struct generic_pm_domain *parent;
+ struct dev_list_entry *dle;
+ unsigned int not_suspended;
+ int ret = 0;
+
+ start:
+ /*
+ * Do not try to power off the domain in the following situations:
+ * (1) The domain is already in the "power off" state.
+ * (2) System suspend is in progress.
+ * (3) One of the domain's devices is being resumed right now.
+ */
+ if (genpd->status == GPD_STATE_POWER_OFF || genpd->prepared_count > 0
+ || genpd->resume_count > 0)
+ return 0;
+
+ if (genpd->sd_count > 0)
+ return -EBUSY;
+
+ not_suspended = 0;
+ list_for_each_entry(dle, &genpd->dev_list, node)
+ if (dle->dev->driver && !pm_runtime_suspended(dle->dev))
+ not_suspended++;
+
+ if (not_suspended > genpd->in_progress)
+ return -EBUSY;
+
+ if (genpd->poweroff_task) {
+ /*
+ * Another instance of pm_genpd_poweroff() is executing
+ * callbacks, so tell it to start over and return.
+ */
+ genpd->status = GPD_STATE_REPEAT;
+ return 0;
+ }
+
+ if (genpd->gov && genpd->gov->power_down_ok) {
+ if (!genpd->gov->power_down_ok(&genpd->domain))
+ return -EAGAIN;
+ }
+
+ genpd->status = GPD_STATE_BUSY;
+ genpd->poweroff_task = current;
+
+ list_for_each_entry_reverse(dle, &genpd->dev_list, node) {
+ ret = __pm_genpd_save_device(dle, genpd);
+ if (ret) {
+ genpd_set_active(genpd);
+ goto out;
+ }
+
+ if (genpd_abort_poweroff(genpd))
+ goto out;
+
+ if (genpd->status == GPD_STATE_REPEAT) {
+ genpd->poweroff_task = NULL;
+ goto start;
+ }
+ }
+
+ parent = genpd->parent;
+ if (parent) {
+ mutex_unlock(&genpd->lock);
+
+ genpd_acquire_lock(parent);
+ mutex_lock_nested(&genpd->lock, SINGLE_DEPTH_NESTING);
+
+ if (genpd_abort_poweroff(genpd)) {
+ genpd_release_lock(parent);
+ goto out;
+ }
+ }
+
+ if (genpd->power_off) {
+ ret = genpd->power_off(genpd);
+ if (ret == -EBUSY) {
+ genpd_set_active(genpd);
+ if (parent)
+ genpd_release_lock(parent);
+
+ goto out;
+ }
+ }
+
+ genpd->status = GPD_STATE_POWER_OFF;
+
+ if (parent) {
+ genpd_sd_counter_dec(parent);
+ if (parent->sd_count == 0)
+ genpd_queue_power_off_work(parent);
+
+ genpd_release_lock(parent);
+ }
+
+ out:
+ genpd->poweroff_task = NULL;
+ wake_up_all(&genpd->status_wait_queue);
+ return ret;
+}
+
+/**
+ * genpd_power_off_work_fn - Power off PM domain whose subdomain count is 0.
+ * @work: Work structure used for scheduling the execution of this function.
+ */
+static void genpd_power_off_work_fn(struct work_struct *work)
+{
+ struct generic_pm_domain *genpd;
+
+ genpd = container_of(work, struct generic_pm_domain, power_off_work);
+
+ genpd_acquire_lock(genpd);
+ pm_genpd_poweroff(genpd);
+ genpd_release_lock(genpd);
+}
+
+/**
+ * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Carry out a runtime suspend of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_runtime_suspend(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->stop_device) {
+ int ret = genpd->stop_device(dev);
+ if (ret)
+ return ret;
+ }
+
+ mutex_lock(&genpd->lock);
+ genpd->in_progress++;
+ pm_genpd_poweroff(genpd);
+ genpd->in_progress--;
+ mutex_unlock(&genpd->lock);
+
+ return 0;
+}
+
+/**
+ * __pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * @dev: Device to resume.
+ * @genpd: PM domain the device belongs to.
+ */
+static void __pm_genpd_runtime_resume(struct device *dev,
+ struct generic_pm_domain *genpd)
+{
+ struct dev_list_entry *dle;
+
+ list_for_each_entry(dle, &genpd->dev_list, node) {
+ if (dle->dev == dev) {
+ __pm_genpd_restore_device(dle, genpd);
+ break;
+ }
+ }
+}
+
+/**
+ * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * @dev: Device to resume.
+ *
+ * Carry out a runtime resume of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_runtime_resume(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ DEFINE_WAIT(wait);
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ ret = pm_genpd_poweron(genpd);
+ if (ret)
+ return ret;
+
+ mutex_lock(&genpd->lock);
+ genpd->status = GPD_STATE_BUSY;
+ genpd->resume_count++;
+ for (;;) {
+ prepare_to_wait(&genpd->status_wait_queue, &wait,
+ TASK_UNINTERRUPTIBLE);
+ /*
+ * If current is the powering off task, we have been called
+ * reentrantly from one of the device callbacks, so we should
+ * not wait.
+ */
+ if (!genpd->poweroff_task || genpd->poweroff_task == current)
+ break;
+ mutex_unlock(&genpd->lock);
+
+ schedule();
+
+ mutex_lock(&genpd->lock);
+ }
+ finish_wait(&genpd->status_wait_queue, &wait);
+ __pm_genpd_runtime_resume(dev, genpd);
+ genpd->resume_count--;
+ genpd_set_active(genpd);
+ wake_up_all(&genpd->status_wait_queue);
+ mutex_unlock(&genpd->lock);
+
+ if (genpd->start_device)
+ genpd->start_device(dev);
+
+ return 0;
+}
+
+#else
+
+static inline void genpd_power_off_work_fn(struct work_struct *work) {}
+static inline void __pm_genpd_runtime_resume(struct device *dev,
+ struct generic_pm_domain *genpd) {}
+
+#define pm_genpd_runtime_suspend NULL
+#define pm_genpd_runtime_resume NULL
+
+#endif /* CONFIG_PM_RUNTIME */
+
+#ifdef CONFIG_PM_SLEEP
+
+/**
+ * pm_genpd_sync_poweroff - Synchronously power off a PM domain and its parents.
+ * @genpd: PM domain to power off, if possible.
+ *
+ * Check if the given PM domain can be powered off (during system suspend or
+ * hibernation) and do that if so. Also, in that case propagate to its parent.
+ *
+ * This function is only called in "noirq" stages of system power transitions,
+ * so it need not acquire locks (all of the "noirq" callbacks are executed
+ * sequentially, so it is guaranteed that it will never run twice in parallel).
+ */
+static void pm_genpd_sync_poweroff(struct generic_pm_domain *genpd)
+{
+ struct generic_pm_domain *parent = genpd->parent;
+
+ if (genpd->status == GPD_STATE_POWER_OFF)
+ return;
+
+ if (genpd->suspended_count != genpd->device_count || genpd->sd_count > 0)
+ return;
+
+ if (genpd->power_off)
+ genpd->power_off(genpd);
+
+ genpd->status = GPD_STATE_POWER_OFF;
+ if (parent) {
+ genpd_sd_counter_dec(parent);
+ pm_genpd_sync_poweroff(parent);
+ }
+}
+
+/**
+ * resume_needed - Check whether to resume a device before system suspend.
+ * @dev: Device to check.
+ * @genpd: PM domain the device belongs to.
+ *
+ * There are two cases in which a device that can wake up the system from sleep
+ * states should be resumed by pm_genpd_prepare(): (1) if the device is enabled
+ * to wake up the system and it has to remain active for this purpose while the
+ * system is in the sleep state and (2) if the device is not enabled to wake up
+ * the system from sleep states and it generally doesn't generate wakeup signals
+ * by itself (those signals are generated on its behalf by other parts of the
+ * system). In the latter case it may be necessary to reconfigure the device's
+ * wakeup settings during system suspend, because it may have been set up to
+ * signal remote wakeup from the system's working state as needed by runtime PM.
+ * Return 'true' in either of the above cases.
+ */
+static bool resume_needed(struct device *dev, struct generic_pm_domain *genpd)
+{
+ bool active_wakeup;
+
+ if (!device_can_wakeup(dev))
+ return false;
+
+ active_wakeup = genpd->active_wakeup && genpd->active_wakeup(dev);
+ return device_may_wakeup(dev) ? active_wakeup : !active_wakeup;
+}
+
+/**
+ * pm_genpd_prepare - Start power transition of a device in a PM domain.
+ * @dev: Device to start the transition of.
+ *
+ * Start a power transition of a device (during a system-wide power transition)
+ * under the assumption that its pm_domain field points to the domain member of
+ * an object of type struct generic_pm_domain representing a PM domain
+ * consisting of I/O devices.
+ */
+static int pm_genpd_prepare(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ /*
+ * If a wakeup request is pending for the device, it should be woken up
+ * at this point and a system wakeup event should be reported if it's
+ * set up to wake up the system from sleep states.
+ */
+ pm_runtime_get_noresume(dev);
+ if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+ pm_wakeup_event(dev, 0);
+
+ if (pm_wakeup_pending()) {
+ pm_runtime_put_sync(dev);
+ return -EBUSY;
+ }
+
+ if (resume_needed(dev, genpd))
+ pm_runtime_resume(dev);
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->prepared_count++ == 0)
+ genpd->suspend_power_off = genpd->status == GPD_STATE_POWER_OFF;
+
+ genpd_release_lock(genpd);
+
+ if (genpd->suspend_power_off) {
+ pm_runtime_put_noidle(dev);
+ return 0;
+ }
+
+ /*
+ * The PM domain must be in the GPD_STATE_ACTIVE state at this point,
+ * so pm_genpd_poweron() will return immediately, but if the device
+ * is suspended (e.g. it's been stopped by .stop_device()), we need
+ * to make it operational.
+ */
+ pm_runtime_resume(dev);
+ __pm_runtime_disable(dev, false);
+
+ ret = pm_generic_prepare(dev);
+ if (ret) {
+ mutex_lock(&genpd->lock);
+
+ if (--genpd->prepared_count == 0)
+ genpd->suspend_power_off = false;
+
+ mutex_unlock(&genpd->lock);
+ pm_runtime_enable(dev);
+ }
+
+ pm_runtime_put_sync(dev);
+ return ret;
+}
+
+/**
+ * pm_genpd_suspend - Suspend a device belonging to an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Suspend a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_suspend(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : pm_generic_suspend(dev);
+}
+
+/**
+ * pm_genpd_suspend_noirq - Late suspend of a device from an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Carry out a late suspend of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_suspend_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off)
+ return 0;
+
+ ret = pm_generic_suspend_noirq(dev);
+ if (ret)
+ return ret;
+
+ if (device_may_wakeup(dev)
+ && genpd->active_wakeup && genpd->active_wakeup(dev))
+ return 0;
+
+ if (genpd->stop_device)
+ genpd->stop_device(dev);
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ */
+ genpd->suspended_count++;
+ pm_genpd_sync_poweroff(genpd);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_resume_noirq - Early resume of a device from an I/O power domain.
+ * @dev: Device to resume.
+ *
+ * Carry out an early resume of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_resume_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off)
+ return 0;
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ */
+ pm_genpd_poweron(genpd);
+ genpd->suspended_count--;
+ if (genpd->start_device)
+ genpd->start_device(dev);
+
+ return pm_generic_resume_noirq(dev);
+}
+
+/**
+ * pm_genpd_resume - Resume a device belonging to an I/O power domain.
+ * @dev: Device to resume.
+ *
+ * Resume a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_resume(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : pm_generic_resume(dev);
+}
+
+/**
+ * pm_genpd_freeze - Freeze a device belonging to an I/O power domain.
+ * @dev: Device to freeze.
+ *
+ * Freeze a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_freeze(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : pm_generic_freeze(dev);
+}
+
+/**
+ * pm_genpd_freeze_noirq - Late freeze of a device from an I/O power domain.
+ * @dev: Device to freeze.
+ *
+ * Carry out a late freeze of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_freeze_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off)
+ return 0;
+
+ ret = pm_generic_freeze_noirq(dev);
+ if (ret)
+ return ret;
+
+ if (genpd->stop_device)
+ genpd->stop_device(dev);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_thaw_noirq - Early thaw of a device from an I/O power domain.
+ * @dev: Device to thaw.
+ *
+ * Carry out an early thaw of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_thaw_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off)
+ return 0;
+
+ if (genpd->start_device)
+ genpd->start_device(dev);
+
+ return pm_generic_thaw_noirq(dev);
+}
+
+/**
+ * pm_genpd_thaw - Thaw a device belonging to an I/O power domain.
+ * @dev: Device to thaw.
+ *
+ * Thaw a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_thaw(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : pm_generic_thaw(dev);
+}
+
+/**
+ * pm_genpd_dev_poweroff - Power off a device belonging to an I/O PM domain.
+ * @dev: Device to suspend.
+ *
+ * Power off a device under the assumption that its pm_domain field points to
+ * the domain member of an object of type struct generic_pm_domain representing
+ * a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_dev_poweroff(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : pm_generic_poweroff(dev);
+}
+
+/**
+ * pm_genpd_dev_poweroff_noirq - Late power off of a device from a PM domain.
+ * @dev: Device to suspend.
+ *
+ * Carry out a late powering off of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a PM domain consisting of I/O devices.
+ */
+static int pm_genpd_dev_poweroff_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ int ret;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ if (genpd->suspend_power_off)
+ return 0;
+
+ ret = pm_generic_poweroff_noirq(dev);
+ if (ret)
+ return ret;
+
+ if (device_may_wakeup(dev)
+ && genpd->active_wakeup && genpd->active_wakeup(dev))
+ return 0;
+
+ if (genpd->stop_device)
+ genpd->stop_device(dev);
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ */
+ genpd->suspended_count++;
+ pm_genpd_sync_poweroff(genpd);
+
+ return 0;
+}
+
+/**
+ * pm_genpd_restore_noirq - Early restore of a device from an I/O power domain.
+ * @dev: Device to resume.
+ *
+ * Carry out an early restore of a device under the assumption that its
+ * pm_domain field points to the domain member of an object of type
+ * struct generic_pm_domain representing a power domain consisting of I/O
+ * devices.
+ */
+static int pm_genpd_restore_noirq(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ /*
+ * Since all of the "noirq" callbacks are executed sequentially, it is
+ * guaranteed that this function will never run twice in parallel for
+ * the same PM domain, so it is not necessary to use locking here.
+ */
+ genpd->status = GPD_STATE_POWER_OFF;
+ if (genpd->suspend_power_off) {
+ /*
+ * The boot kernel might put the domain into the power on state,
+ * so make sure it really is powered off.
+ */
+ if (genpd->power_off)
+ genpd->power_off(genpd);
+ return 0;
+ }
+
+ pm_genpd_poweron(genpd);
+ genpd->suspended_count--;
+ if (genpd->start_device)
+ genpd->start_device(dev);
+
+ return pm_generic_restore_noirq(dev);
+}
+
+/**
+ * pm_genpd_restore - Restore a device belonging to an I/O power domain.
+ * @dev: Device to resume.
+ *
+ * Restore a device under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static int pm_genpd_restore(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return -EINVAL;
+
+ return genpd->suspend_power_off ? 0 : pm_generic_restore(dev);
+}
+
+/**
+ * pm_genpd_complete - Complete power transition of a device in a power domain.
+ * @dev: Device to complete the transition of.
+ *
+ * Complete a power transition of a device (during a system-wide power
+ * transition) under the assumption that its pm_domain field points to the
+ * domain member of an object of type struct generic_pm_domain representing
+ * a power domain consisting of I/O devices.
+ */
+static void pm_genpd_complete(struct device *dev)
+{
+ struct generic_pm_domain *genpd;
+ bool run_complete;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ genpd = dev_to_genpd(dev);
+ if (IS_ERR(genpd))
+ return;
+
+ mutex_lock(&genpd->lock);
+
+ run_complete = !genpd->suspend_power_off;
+ if (--genpd->prepared_count == 0)
+ genpd->suspend_power_off = false;
+
+ mutex_unlock(&genpd->lock);
+
+ if (run_complete) {
+ pm_generic_complete(dev);
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ pm_runtime_idle(dev);
+ }
+}
+
+#else
+
+#define pm_genpd_prepare NULL
+#define pm_genpd_suspend NULL
+#define pm_genpd_suspend_noirq NULL
+#define pm_genpd_resume_noirq NULL
+#define pm_genpd_resume NULL
+#define pm_genpd_freeze NULL
+#define pm_genpd_freeze_noirq NULL
+#define pm_genpd_thaw_noirq NULL
+#define pm_genpd_thaw NULL
+#define pm_genpd_dev_poweroff_noirq NULL
+#define pm_genpd_dev_poweroff NULL
+#define pm_genpd_restore_noirq NULL
+#define pm_genpd_restore NULL
+#define pm_genpd_complete NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+/**
+ * pm_genpd_add_device - Add a device to an I/O PM domain.
+ * @genpd: PM domain to add the device to.
+ * @dev: Device to be added.
+ */
+int pm_genpd_add_device(struct generic_pm_domain *genpd, struct device *dev)
+{
+ struct dev_list_entry *dle;
+ int ret = 0;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
+ return -EINVAL;
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->status == GPD_STATE_POWER_OFF) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ if (genpd->prepared_count > 0) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ list_for_each_entry(dle, &genpd->dev_list, node)
+ if (dle->dev == dev) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ dle = kzalloc(sizeof(*dle), GFP_KERNEL);
+ if (!dle) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ dle->dev = dev;
+ dle->need_restore = false;
+ list_add_tail(&dle->node, &genpd->dev_list);
+ genpd->device_count++;
+
+ spin_lock_irq(&dev->power.lock);
+ dev->pm_domain = &genpd->domain;
+ spin_unlock_irq(&dev->power.lock);
+
+ out:
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_remove_device - Remove a device from an I/O PM domain.
+ * @genpd: PM domain to remove the device from.
+ * @dev: Device to be removed.
+ */
+int pm_genpd_remove_device(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ struct dev_list_entry *dle;
+ int ret = -EINVAL;
+
+ dev_dbg(dev, "%s()\n", __func__);
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(dev))
+ return -EINVAL;
+
+ genpd_acquire_lock(genpd);
+
+ if (genpd->prepared_count > 0) {
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ list_for_each_entry(dle, &genpd->dev_list, node) {
+ if (dle->dev != dev)
+ continue;
+
+ spin_lock_irq(&dev->power.lock);
+ dev->pm_domain = NULL;
+ spin_unlock_irq(&dev->power.lock);
+
+ genpd->device_count--;
+ list_del(&dle->node);
+ kfree(dle);
+
+ ret = 0;
+ break;
+ }
+
+ out:
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain.
+ * @genpd: Master PM domain to add the subdomain to.
+ * @new_subdomain: Subdomain to be added.
+ */
+int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *new_subdomain)
+{
+ struct generic_pm_domain *subdomain;
+ int ret = 0;
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(new_subdomain))
+ return -EINVAL;
+
+ start:
+ genpd_acquire_lock(genpd);
+ mutex_lock_nested(&new_subdomain->lock, SINGLE_DEPTH_NESTING);
+
+ if (new_subdomain->status != GPD_STATE_POWER_OFF
+ && new_subdomain->status != GPD_STATE_ACTIVE) {
+ mutex_unlock(&new_subdomain->lock);
+ genpd_release_lock(genpd);
+ goto start;
+ }
+
+ if (genpd->status == GPD_STATE_POWER_OFF
+ && new_subdomain->status != GPD_STATE_POWER_OFF) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ list_for_each_entry(subdomain, &genpd->sd_list, sd_node) {
+ if (subdomain == new_subdomain) {
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+
+ list_add_tail(&new_subdomain->sd_node, &genpd->sd_list);
+ new_subdomain->parent = genpd;
+ if (subdomain->status != GPD_STATE_POWER_OFF)
+ genpd->sd_count++;
+
+ out:
+ mutex_unlock(&new_subdomain->lock);
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain.
+ * @genpd: Master PM domain to remove the subdomain from.
+ * @target: Subdomain to be removed.
+ */
+int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *target)
+{
+ struct generic_pm_domain *subdomain;
+ int ret = -EINVAL;
+
+ if (IS_ERR_OR_NULL(genpd) || IS_ERR_OR_NULL(target))
+ return -EINVAL;
+
+ start:
+ genpd_acquire_lock(genpd);
+
+ list_for_each_entry(subdomain, &genpd->sd_list, sd_node) {
+ if (subdomain != target)
+ continue;
+
+ mutex_lock_nested(&subdomain->lock, SINGLE_DEPTH_NESTING);
+
+ if (subdomain->status != GPD_STATE_POWER_OFF
+ && subdomain->status != GPD_STATE_ACTIVE) {
+ mutex_unlock(&subdomain->lock);
+ genpd_release_lock(genpd);
+ goto start;
+ }
+
+ list_del(&subdomain->sd_node);
+ subdomain->parent = NULL;
+ if (subdomain->status != GPD_STATE_POWER_OFF)
+ genpd_sd_counter_dec(genpd);
+
+ mutex_unlock(&subdomain->lock);
+
+ ret = 0;
+ break;
+ }
+
+ genpd_release_lock(genpd);
+
+ return ret;
+}
+
+/**
+ * pm_genpd_init - Initialize a generic I/O PM domain object.
+ * @genpd: PM domain object to initialize.
+ * @gov: PM domain governor to associate with the domain (may be NULL).
+ * @is_off: Initial value of the domain's power_is_off field.
+ */
+void pm_genpd_init(struct generic_pm_domain *genpd,
+ struct dev_power_governor *gov, bool is_off)
+{
+ if (IS_ERR_OR_NULL(genpd))
+ return;
+
+ INIT_LIST_HEAD(&genpd->sd_node);
+ genpd->parent = NULL;
+ INIT_LIST_HEAD(&genpd->dev_list);
+ INIT_LIST_HEAD(&genpd->sd_list);
+ mutex_init(&genpd->lock);
+ genpd->gov = gov;
+ INIT_WORK(&genpd->power_off_work, genpd_power_off_work_fn);
+ genpd->in_progress = 0;
+ genpd->sd_count = 0;
+ genpd->status = is_off ? GPD_STATE_POWER_OFF : GPD_STATE_ACTIVE;
+ init_waitqueue_head(&genpd->status_wait_queue);
+ genpd->poweroff_task = NULL;
+ genpd->resume_count = 0;
+ genpd->device_count = 0;
+ genpd->suspended_count = 0;
+ genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
+ genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
+ genpd->domain.ops.runtime_idle = pm_generic_runtime_idle;
+ genpd->domain.ops.prepare = pm_genpd_prepare;
+ genpd->domain.ops.suspend = pm_genpd_suspend;
+ genpd->domain.ops.suspend_noirq = pm_genpd_suspend_noirq;
+ genpd->domain.ops.resume_noirq = pm_genpd_resume_noirq;
+ genpd->domain.ops.resume = pm_genpd_resume;
+ genpd->domain.ops.freeze = pm_genpd_freeze;
+ genpd->domain.ops.freeze_noirq = pm_genpd_freeze_noirq;
+ genpd->domain.ops.thaw_noirq = pm_genpd_thaw_noirq;
+ genpd->domain.ops.thaw = pm_genpd_thaw;
+ genpd->domain.ops.poweroff = pm_genpd_dev_poweroff;
+ genpd->domain.ops.poweroff_noirq = pm_genpd_dev_poweroff_noirq;
+ genpd->domain.ops.restore_noirq = pm_genpd_restore_noirq;
+ genpd->domain.ops.restore = pm_genpd_restore;
+ genpd->domain.ops.complete = pm_genpd_complete;
+ mutex_lock(&gpd_list_lock);
+ list_add(&genpd->gpd_list_node, &gpd_list);
+ mutex_unlock(&gpd_list_lock);
+}
+
+/**
+ * pm_genpd_poweroff_unused - Power off all PM domains with no devices in use.
+ */
+void pm_genpd_poweroff_unused(void)
+{
+ struct generic_pm_domain *genpd;
+
+ mutex_lock(&gpd_list_lock);
+
+ list_for_each_entry(genpd, &gpd_list, gpd_list_node)
+ genpd_queue_power_off_work(genpd);
+
+ mutex_unlock(&gpd_list_lock);
+}
diff --git a/drivers/base/power/generic_ops.c b/drivers/base/power/generic_ops.c
index cb3bb368681..9508df71274 100644
--- a/drivers/base/power/generic_ops.c
+++ b/drivers/base/power/generic_ops.c
@@ -94,12 +94,13 @@ int pm_generic_prepare(struct device *dev)
* __pm_generic_call - Generic suspend/freeze/poweroff/thaw subsystem callback.
* @dev: Device to handle.
* @event: PM transition of the system under way.
+ * @bool: Whether or not this is the "noirq" stage.
*
* If the device has not been suspended at run time, execute the
* suspend/freeze/poweroff/thaw callback provided by its driver, if defined, and
* return its error code. Otherwise, return zero.
*/
-static int __pm_generic_call(struct device *dev, int event)
+static int __pm_generic_call(struct device *dev, int event, bool noirq)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int (*callback)(struct device *);
@@ -109,16 +110,16 @@ static int __pm_generic_call(struct device *dev, int event)
switch (event) {
case PM_EVENT_SUSPEND:
- callback = pm->suspend;
+ callback = noirq ? pm->suspend_noirq : pm->suspend;
break;
case PM_EVENT_FREEZE:
- callback = pm->freeze;
+ callback = noirq ? pm->freeze_noirq : pm->freeze;
break;
case PM_EVENT_HIBERNATE:
- callback = pm->poweroff;
+ callback = noirq ? pm->poweroff_noirq : pm->poweroff;
break;
case PM_EVENT_THAW:
- callback = pm->thaw;
+ callback = noirq ? pm->thaw_noirq : pm->thaw;
break;
default:
callback = NULL;
@@ -129,42 +130,82 @@ static int __pm_generic_call(struct device *dev, int event)
}
/**
+ * pm_generic_suspend_noirq - Generic suspend_noirq callback for subsystems.
+ * @dev: Device to suspend.
+ */
+int pm_generic_suspend_noirq(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_SUSPEND, true);
+}
+EXPORT_SYMBOL_GPL(pm_generic_suspend_noirq);
+
+/**
* pm_generic_suspend - Generic suspend callback for subsystems.
* @dev: Device to suspend.
*/
int pm_generic_suspend(struct device *dev)
{
- return __pm_generic_call(dev, PM_EVENT_SUSPEND);
+ return __pm_generic_call(dev, PM_EVENT_SUSPEND, false);
}
EXPORT_SYMBOL_GPL(pm_generic_suspend);
/**
+ * pm_generic_freeze_noirq - Generic freeze_noirq callback for subsystems.
+ * @dev: Device to freeze.
+ */
+int pm_generic_freeze_noirq(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_FREEZE, true);
+}
+EXPORT_SYMBOL_GPL(pm_generic_freeze_noirq);
+
+/**
* pm_generic_freeze - Generic freeze callback for subsystems.
* @dev: Device to freeze.
*/
int pm_generic_freeze(struct device *dev)
{
- return __pm_generic_call(dev, PM_EVENT_FREEZE);
+ return __pm_generic_call(dev, PM_EVENT_FREEZE, false);
}
EXPORT_SYMBOL_GPL(pm_generic_freeze);
/**
+ * pm_generic_poweroff_noirq - Generic poweroff_noirq callback for subsystems.
+ * @dev: Device to handle.
+ */
+int pm_generic_poweroff_noirq(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_HIBERNATE, true);
+}
+EXPORT_SYMBOL_GPL(pm_generic_poweroff_noirq);
+
+/**
* pm_generic_poweroff - Generic poweroff callback for subsystems.
* @dev: Device to handle.
*/
int pm_generic_poweroff(struct device *dev)
{
- return __pm_generic_call(dev, PM_EVENT_HIBERNATE);
+ return __pm_generic_call(dev, PM_EVENT_HIBERNATE, false);
}
EXPORT_SYMBOL_GPL(pm_generic_poweroff);
/**
+ * pm_generic_thaw_noirq - Generic thaw_noirq callback for subsystems.
+ * @dev: Device to thaw.
+ */
+int pm_generic_thaw_noirq(struct device *dev)
+{
+ return __pm_generic_call(dev, PM_EVENT_THAW, true);
+}
+EXPORT_SYMBOL_GPL(pm_generic_thaw_noirq);
+
+/**
* pm_generic_thaw - Generic thaw callback for subsystems.
* @dev: Device to thaw.
*/
int pm_generic_thaw(struct device *dev)
{
- return __pm_generic_call(dev, PM_EVENT_THAW);
+ return __pm_generic_call(dev, PM_EVENT_THAW, false);
}
EXPORT_SYMBOL_GPL(pm_generic_thaw);
@@ -172,12 +213,13 @@ EXPORT_SYMBOL_GPL(pm_generic_thaw);
* __pm_generic_resume - Generic resume/restore callback for subsystems.
* @dev: Device to handle.
* @event: PM transition of the system under way.
+ * @bool: Whether or not this is the "noirq" stage.
*
* Execute the resume/resotre callback provided by the @dev's driver, if
* defined. If it returns 0, change the device's runtime PM status to 'active'.
* Return the callback's error code.
*/
-static int __pm_generic_resume(struct device *dev, int event)
+static int __pm_generic_resume(struct device *dev, int event, bool noirq)
{
const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
int (*callback)(struct device *);
@@ -188,10 +230,10 @@ static int __pm_generic_resume(struct device *dev, int event)
switch (event) {
case PM_EVENT_RESUME:
- callback = pm->resume;
+ callback = noirq ? pm->resume_noirq : pm->resume;
break;
case PM_EVENT_RESTORE:
- callback = pm->restore;
+ callback = noirq ? pm->restore_noirq : pm->restore;
break;
default:
callback = NULL;
@@ -202,7 +244,7 @@ static int __pm_generic_resume(struct device *dev, int event)
return 0;
ret = callback(dev);
- if (!ret && pm_runtime_enabled(dev)) {
+ if (!ret && !noirq && pm_runtime_enabled(dev)) {
pm_runtime_disable(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
@@ -212,22 +254,42 @@ static int __pm_generic_resume(struct device *dev, int event)
}
/**
+ * pm_generic_resume_noirq - Generic resume_noirq callback for subsystems.
+ * @dev: Device to resume.
+ */
+int pm_generic_resume_noirq(struct device *dev)
+{
+ return __pm_generic_resume(dev, PM_EVENT_RESUME, true);
+}
+EXPORT_SYMBOL_GPL(pm_generic_resume_noirq);
+
+/**
* pm_generic_resume - Generic resume callback for subsystems.
* @dev: Device to resume.
*/
int pm_generic_resume(struct device *dev)
{
- return __pm_generic_resume(dev, PM_EVENT_RESUME);
+ return __pm_generic_resume(dev, PM_EVENT_RESUME, false);
}
EXPORT_SYMBOL_GPL(pm_generic_resume);
/**
+ * pm_generic_restore_noirq - Generic restore_noirq callback for subsystems.
+ * @dev: Device to restore.
+ */
+int pm_generic_restore_noirq(struct device *dev)
+{
+ return __pm_generic_resume(dev, PM_EVENT_RESTORE, true);
+}
+EXPORT_SYMBOL_GPL(pm_generic_restore_noirq);
+
+/**
* pm_generic_restore - Generic restore callback for subsystems.
* @dev: Device to restore.
*/
int pm_generic_restore(struct device *dev)
{
- return __pm_generic_resume(dev, PM_EVENT_RESTORE);
+ return __pm_generic_resume(dev, PM_EVENT_RESTORE, false);
}
EXPORT_SYMBOL_GPL(pm_generic_restore);
@@ -256,11 +318,17 @@ struct dev_pm_ops generic_subsys_pm_ops = {
#ifdef CONFIG_PM_SLEEP
.prepare = pm_generic_prepare,
.suspend = pm_generic_suspend,
+ .suspend_noirq = pm_generic_suspend_noirq,
.resume = pm_generic_resume,
+ .resume_noirq = pm_generic_resume_noirq,
.freeze = pm_generic_freeze,
+ .freeze_noirq = pm_generic_freeze_noirq,
.thaw = pm_generic_thaw,
+ .thaw_noirq = pm_generic_thaw_noirq,
.poweroff = pm_generic_poweroff,
+ .poweroff_noirq = pm_generic_poweroff_noirq,
.restore = pm_generic_restore,
+ .restore_noirq = pm_generic_restore_noirq,
.complete = pm_generic_complete,
#endif
#ifdef CONFIG_PM_RUNTIME
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 06f09bf89cb..a85459126bc 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -425,9 +425,9 @@ static int device_resume_noirq(struct device *dev, pm_message_t state)
TRACE_DEVICE(dev);
TRACE_RESUME(0);
- if (dev->pwr_domain) {
+ if (dev->pm_domain) {
pm_dev_dbg(dev, state, "EARLY power domain ");
- error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+ error = pm_noirq_op(dev, &dev->pm_domain->ops, state);
} else if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "EARLY type ");
error = pm_noirq_op(dev, dev->type->pm, state);
@@ -505,6 +505,7 @@ static int legacy_resume(struct device *dev, int (*cb)(struct device *dev))
static int device_resume(struct device *dev, pm_message_t state, bool async)
{
int error = 0;
+ bool put = false;
TRACE_DEVICE(dev);
TRACE_RESUME(0);
@@ -521,9 +522,12 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
if (!dev->power.is_suspended)
goto Unlock;
- if (dev->pwr_domain) {
+ pm_runtime_enable(dev);
+ put = true;
+
+ if (dev->pm_domain) {
pm_dev_dbg(dev, state, "power domain ");
- error = pm_op(dev, &dev->pwr_domain->ops, state);
+ error = pm_op(dev, &dev->pm_domain->ops, state);
goto End;
}
@@ -563,6 +567,10 @@ static int device_resume(struct device *dev, pm_message_t state, bool async)
complete_all(&dev->power.completion);
TRACE_RESUME(error);
+
+ if (put)
+ pm_runtime_put_sync(dev);
+
return error;
}
@@ -641,10 +649,10 @@ static void device_complete(struct device *dev, pm_message_t state)
{
device_lock(dev);
- if (dev->pwr_domain) {
+ if (dev->pm_domain) {
pm_dev_dbg(dev, state, "completing power domain ");
- if (dev->pwr_domain->ops.complete)
- dev->pwr_domain->ops.complete(dev);
+ if (dev->pm_domain->ops.complete)
+ dev->pm_domain->ops.complete(dev);
} else if (dev->type && dev->type->pm) {
pm_dev_dbg(dev, state, "completing type ");
if (dev->type->pm->complete)
@@ -744,9 +752,9 @@ static int device_suspend_noirq(struct device *dev, pm_message_t state)
{
int error;
- if (dev->pwr_domain) {
+ if (dev->pm_domain) {
pm_dev_dbg(dev, state, "LATE power domain ");
- error = pm_noirq_op(dev, &dev->pwr_domain->ops, state);
+ error = pm_noirq_op(dev, &dev->pm_domain->ops, state);
if (error)
return error;
} else if (dev->type && dev->type->pm) {
@@ -843,19 +851,25 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
int error = 0;
dpm_wait_for_children(dev, async);
- device_lock(dev);
if (async_error)
- goto Unlock;
+ return 0;
+
+ pm_runtime_get_noresume(dev);
+ if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+ pm_wakeup_event(dev, 0);
if (pm_wakeup_pending()) {
+ pm_runtime_put_sync(dev);
async_error = -EBUSY;
- goto Unlock;
+ return 0;
}
- if (dev->pwr_domain) {
+ device_lock(dev);
+
+ if (dev->pm_domain) {
pm_dev_dbg(dev, state, "power domain ");
- error = pm_op(dev, &dev->pwr_domain->ops, state);
+ error = pm_op(dev, &dev->pm_domain->ops, state);
goto End;
}
@@ -890,12 +904,15 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
End:
dev->power.is_suspended = !error;
- Unlock:
device_unlock(dev);
complete_all(&dev->power.completion);
- if (error)
+ if (error) {
+ pm_runtime_put_sync(dev);
async_error = error;
+ } else if (dev->power.is_suspended) {
+ __pm_runtime_disable(dev, false);
+ }
return error;
}
@@ -982,11 +999,11 @@ static int device_prepare(struct device *dev, pm_message_t state)
device_lock(dev);
- if (dev->pwr_domain) {
+ if (dev->pm_domain) {
pm_dev_dbg(dev, state, "preparing power domain ");
- if (dev->pwr_domain->ops.prepare)
- error = dev->pwr_domain->ops.prepare(dev);
- suspend_report_result(dev->pwr_domain->ops.prepare, error);
+ if (dev->pm_domain->ops.prepare)
+ error = dev->pm_domain->ops.prepare(dev);
+ suspend_report_result(dev->pm_domain->ops.prepare, error);
if (error)
goto End;
} else if (dev->type && dev->type->pm) {
@@ -1035,13 +1052,7 @@ int dpm_prepare(pm_message_t state)
get_device(dev);
mutex_unlock(&dpm_list_mtx);
- pm_runtime_get_noresume(dev);
- if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
- pm_wakeup_event(dev, 0);
-
- pm_runtime_put_sync(dev);
- error = pm_wakeup_pending() ?
- -EBUSY : device_prepare(dev, state);
+ error = device_prepare(dev, state);
mutex_lock(&dpm_list_mtx);
if (error) {
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 56a6899f5e9..5cc12322ef3 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -625,4 +625,21 @@ int opp_init_cpufreq_table(struct device *dev,
return 0;
}
+
+/**
+ * opp_free_cpufreq_table() - free the cpufreq table
+ * @dev: device for which we do this operation
+ * @table: table to free
+ *
+ * Free up the table allocated by opp_init_cpufreq_table
+ */
+void opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table)
+{
+ if (!table)
+ return;
+
+ kfree(*table);
+ *table = NULL;
+}
#endif /* CONFIG_CPU_FREQ */
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 0d4587b15c5..8dc247c974a 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -1,5 +1,5 @@
/*
- * drivers/base/power/runtime.c - Helper functions for device run-time PM
+ * drivers/base/power/runtime.c - Helper functions for device runtime PM
*
* Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
* Copyright (C) 2010 Alan Stern <stern@rowland.harvard.edu>
@@ -135,8 +135,9 @@ static int rpm_check_suspend_allowed(struct device *dev)
if (dev->power.runtime_error)
retval = -EINVAL;
- else if (atomic_read(&dev->power.usage_count) > 0
- || dev->power.disable_depth > 0)
+ else if (dev->power.disable_depth > 0)
+ retval = -EACCES;
+ else if (atomic_read(&dev->power.usage_count) > 0)
retval = -EAGAIN;
else if (!pm_children_suspended(dev))
retval = -EBUSY;
@@ -158,7 +159,7 @@ static int rpm_check_suspend_allowed(struct device *dev)
* @dev: Device to notify the bus type about.
* @rpmflags: Flag bits.
*
- * Check if the device's run-time PM status allows it to be suspended. If
+ * Check if the device's runtime PM status allows it to be suspended. If
* another idle notification has been started earlier, return immediately. If
* the RPM_ASYNC flag is set then queue an idle-notification request; otherwise
* run the ->runtime_idle() callback directly.
@@ -213,8 +214,8 @@ static int rpm_idle(struct device *dev, int rpmflags)
dev->power.idle_notification = true;
- if (dev->pwr_domain)
- callback = dev->pwr_domain->ops.runtime_idle;
+ if (dev->pm_domain)
+ callback = dev->pm_domain->ops.runtime_idle;
else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_idle;
else if (dev->class && dev->class->pm)
@@ -262,15 +263,15 @@ static int rpm_callback(int (*cb)(struct device *), struct device *dev)
spin_lock_irq(&dev->power.lock);
}
dev->power.runtime_error = retval;
- return retval;
+ return retval != -EACCES ? retval : -EIO;
}
/**
- * rpm_suspend - Carry out run-time suspend of given device.
+ * rpm_suspend - Carry out runtime suspend of given device.
* @dev: Device to suspend.
* @rpmflags: Flag bits.
*
- * Check if the device's run-time PM status allows it to be suspended. If
+ * Check if the device's runtime PM status allows it to be suspended. If
* another suspend has been started earlier, either return immediately or wait
* for it to finish, depending on the RPM_NOWAIT and RPM_ASYNC flags. Cancel a
* pending idle notification. If the RPM_ASYNC flag is set then queue a
@@ -374,8 +375,8 @@ static int rpm_suspend(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_SUSPENDING);
- if (dev->pwr_domain)
- callback = dev->pwr_domain->ops.runtime_suspend;
+ if (dev->pm_domain)
+ callback = dev->pm_domain->ops.runtime_suspend;
else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_suspend;
else if (dev->class && dev->class->pm)
@@ -388,7 +389,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
retval = rpm_callback(callback, dev);
if (retval) {
__update_runtime_status(dev, RPM_ACTIVE);
- dev->power.deferred_resume = 0;
+ dev->power.deferred_resume = false;
if (retval == -EAGAIN || retval == -EBUSY)
dev->power.runtime_error = 0;
else
@@ -429,11 +430,11 @@ static int rpm_suspend(struct device *dev, int rpmflags)
}
/**
- * rpm_resume - Carry out run-time resume of given device.
+ * rpm_resume - Carry out runtime resume of given device.
* @dev: Device to resume.
* @rpmflags: Flag bits.
*
- * Check if the device's run-time PM status allows it to be resumed. Cancel
+ * Check if the device's runtime PM status allows it to be resumed. Cancel
* any scheduled or pending requests. If another resume has been started
* earlier, either return immediately or wait for it to finish, depending on the
* RPM_NOWAIT and RPM_ASYNC flags. Similarly, if there's a suspend running in
@@ -458,7 +459,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
if (dev->power.runtime_error)
retval = -EINVAL;
else if (dev->power.disable_depth > 0)
- retval = -EAGAIN;
+ retval = -EACCES;
if (retval)
goto out;
@@ -550,7 +551,7 @@ static int rpm_resume(struct device *dev, int rpmflags)
spin_lock(&parent->power.lock);
/*
- * We can resume if the parent's run-time PM is disabled or it
+ * We can resume if the parent's runtime PM is disabled or it
* is set to ignore children.
*/
if (!parent->power.disable_depth
@@ -573,8 +574,8 @@ static int rpm_resume(struct device *dev, int rpmflags)
__update_runtime_status(dev, RPM_RESUMING);
- if (dev->pwr_domain)
- callback = dev->pwr_domain->ops.runtime_resume;
+ if (dev->pm_domain)
+ callback = dev->pm_domain->ops.runtime_resume;
else if (dev->type && dev->type->pm)
callback = dev->type->pm->runtime_resume;
else if (dev->class && dev->class->pm)
@@ -614,11 +615,11 @@ static int rpm_resume(struct device *dev, int rpmflags)
}
/**
- * pm_runtime_work - Universal run-time PM work function.
+ * pm_runtime_work - Universal runtime PM work function.
* @work: Work structure used for scheduling the execution of this function.
*
* Use @work to get the device object the work is to be done for, determine what
- * is to be done and execute the appropriate run-time PM function.
+ * is to be done and execute the appropriate runtime PM function.
*/
static void pm_runtime_work(struct work_struct *work)
{
@@ -717,7 +718,7 @@ int pm_schedule_suspend(struct device *dev, unsigned int delay)
EXPORT_SYMBOL_GPL(pm_schedule_suspend);
/**
- * __pm_runtime_idle - Entry point for run-time idle operations.
+ * __pm_runtime_idle - Entry point for runtime idle operations.
* @dev: Device to send idle notification for.
* @rpmflags: Flag bits.
*
@@ -746,7 +747,7 @@ int __pm_runtime_idle(struct device *dev, int rpmflags)
EXPORT_SYMBOL_GPL(__pm_runtime_idle);
/**
- * __pm_runtime_suspend - Entry point for run-time put/suspend operations.
+ * __pm_runtime_suspend - Entry point for runtime put/suspend operations.
* @dev: Device to suspend.
* @rpmflags: Flag bits.
*
@@ -775,7 +776,7 @@ int __pm_runtime_suspend(struct device *dev, int rpmflags)
EXPORT_SYMBOL_GPL(__pm_runtime_suspend);
/**
- * __pm_runtime_resume - Entry point for run-time resume operations.
+ * __pm_runtime_resume - Entry point for runtime resume operations.
* @dev: Device to resume.
* @rpmflags: Flag bits.
*
@@ -801,11 +802,11 @@ int __pm_runtime_resume(struct device *dev, int rpmflags)
EXPORT_SYMBOL_GPL(__pm_runtime_resume);
/**
- * __pm_runtime_set_status - Set run-time PM status of a device.
+ * __pm_runtime_set_status - Set runtime PM status of a device.
* @dev: Device to handle.
- * @status: New run-time PM status of the device.
+ * @status: New runtime PM status of the device.
*
- * If run-time PM of the device is disabled or its power.runtime_error field is
+ * If runtime PM of the device is disabled or its power.runtime_error field is
* different from zero, the status may be changed either to RPM_ACTIVE, or to
* RPM_SUSPENDED, as long as that reflects the actual state of the device.
* However, if the device has a parent and the parent is not active, and the
@@ -851,7 +852,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status)
/*
* It is invalid to put an active child under a parent that is
- * not active, has run-time PM enabled and the
+ * not active, has runtime PM enabled and the
* 'power.ignore_children' flag unset.
*/
if (!parent->power.disable_depth
@@ -885,7 +886,7 @@ EXPORT_SYMBOL_GPL(__pm_runtime_set_status);
* @dev: Device to handle.
*
* Flush all pending requests for the device from pm_wq and wait for all
- * run-time PM operations involving the device in progress to complete.
+ * runtime PM operations involving the device in progress to complete.
*
* Should be called under dev->power.lock with interrupts disabled.
*/
@@ -933,7 +934,7 @@ static void __pm_runtime_barrier(struct device *dev)
* Prevent the device from being suspended by incrementing its usage counter and
* if there's a pending resume request for the device, wake the device up.
* Next, make sure that all pending requests for the device have been flushed
- * from pm_wq and wait for all run-time PM operations involving the device in
+ * from pm_wq and wait for all runtime PM operations involving the device in
* progress to complete.
*
* Return value:
@@ -963,18 +964,18 @@ int pm_runtime_barrier(struct device *dev)
EXPORT_SYMBOL_GPL(pm_runtime_barrier);
/**
- * __pm_runtime_disable - Disable run-time PM of a device.
+ * __pm_runtime_disable - Disable runtime PM of a device.
* @dev: Device to handle.
* @check_resume: If set, check if there's a resume request for the device.
*
* Increment power.disable_depth for the device and if was zero previously,
- * cancel all pending run-time PM requests for the device and wait for all
+ * cancel all pending runtime PM requests for the device and wait for all
* operations in progress to complete. The device can be either active or
- * suspended after its run-time PM has been disabled.
+ * suspended after its runtime PM has been disabled.
*
* If @check_resume is set and there's a resume request pending when
* __pm_runtime_disable() is called and power.disable_depth is zero, the
- * function will wake up the device before disabling its run-time PM.
+ * function will wake up the device before disabling its runtime PM.
*/
void __pm_runtime_disable(struct device *dev, bool check_resume)
{
@@ -987,7 +988,7 @@ void __pm_runtime_disable(struct device *dev, bool check_resume)
/*
* Wake up the device if there's a resume request pending, because that
- * means there probably is some I/O to process and disabling run-time PM
+ * means there probably is some I/O to process and disabling runtime PM
* shouldn't prevent the device from processing the I/O.
*/
if (check_resume && dev->power.request_pending
@@ -1012,7 +1013,7 @@ void __pm_runtime_disable(struct device *dev, bool check_resume)
EXPORT_SYMBOL_GPL(__pm_runtime_disable);
/**
- * pm_runtime_enable - Enable run-time PM of a device.
+ * pm_runtime_enable - Enable runtime PM of a device.
* @dev: Device to handle.
*/
void pm_runtime_enable(struct device *dev)
@@ -1031,7 +1032,7 @@ void pm_runtime_enable(struct device *dev)
EXPORT_SYMBOL_GPL(pm_runtime_enable);
/**
- * pm_runtime_forbid - Block run-time PM of a device.
+ * pm_runtime_forbid - Block runtime PM of a device.
* @dev: Device to handle.
*
* Increase the device's usage count and clear its power.runtime_auto flag,
@@ -1054,7 +1055,7 @@ void pm_runtime_forbid(struct device *dev)
EXPORT_SYMBOL_GPL(pm_runtime_forbid);
/**
- * pm_runtime_allow - Unblock run-time PM of a device.
+ * pm_runtime_allow - Unblock runtime PM of a device.
* @dev: Device to handle.
*
* Decrease the device's usage count and set its power.runtime_auto flag.
@@ -1075,12 +1076,12 @@ void pm_runtime_allow(struct device *dev)
EXPORT_SYMBOL_GPL(pm_runtime_allow);
/**
- * pm_runtime_no_callbacks - Ignore run-time PM callbacks for a device.
+ * pm_runtime_no_callbacks - Ignore runtime PM callbacks for a device.
* @dev: Device to handle.
*
* Set the power.no_callbacks flag, which tells the PM core that this
- * device is power-managed through its parent and has no run-time PM
- * callbacks of its own. The run-time sysfs attributes will be removed.
+ * device is power-managed through its parent and has no runtime PM
+ * callbacks of its own. The runtime sysfs attributes will be removed.
*/
void pm_runtime_no_callbacks(struct device *dev)
{
@@ -1156,8 +1157,8 @@ static void update_autosuspend(struct device *dev, int old_delay, int old_use)
* @delay: Value of the new delay in milliseconds.
*
* Set the device's power.autosuspend_delay value. If it changes to negative
- * and the power.use_autosuspend flag is set, prevent run-time suspends. If it
- * changes the other way, allow run-time suspends.
+ * and the power.use_autosuspend flag is set, prevent runtime suspends. If it
+ * changes the other way, allow runtime suspends.
*/
void pm_runtime_set_autosuspend_delay(struct device *dev, int delay)
{
@@ -1177,7 +1178,7 @@ EXPORT_SYMBOL_GPL(pm_runtime_set_autosuspend_delay);
* @dev: Device to handle.
* @use: New value for use_autosuspend.
*
- * Set the device's power.use_autosuspend flag, and allow or prevent run-time
+ * Set the device's power.use_autosuspend flag, and allow or prevent runtime
* suspends as needed.
*/
void __pm_runtime_use_autosuspend(struct device *dev, bool use)
@@ -1194,7 +1195,7 @@ void __pm_runtime_use_autosuspend(struct device *dev, bool use)
EXPORT_SYMBOL_GPL(__pm_runtime_use_autosuspend);
/**
- * pm_runtime_init - Initialize run-time PM fields in given device object.
+ * pm_runtime_init - Initialize runtime PM fields in given device object.
* @dev: Device object to initialize.
*/
void pm_runtime_init(struct device *dev)
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index a9f5b897961..942d6a7c9ae 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -116,12 +116,14 @@ static ssize_t control_store(struct device * dev, struct device_attribute *attr,
cp = memchr(buf, '\n', n);
if (cp)
len = cp - buf;
+ device_lock(dev);
if (len == sizeof ctrl_auto - 1 && strncmp(buf, ctrl_auto, len) == 0)
pm_runtime_allow(dev);
else if (len == sizeof ctrl_on - 1 && strncmp(buf, ctrl_on, len) == 0)
pm_runtime_forbid(dev);
else
- return -EINVAL;
+ n = -EINVAL;
+ device_unlock(dev);
return n;
}
@@ -205,7 +207,9 @@ static ssize_t autosuspend_delay_ms_store(struct device *dev,
if (strict_strtol(buf, 10, &delay) != 0 || delay != (int) delay)
return -EINVAL;
+ device_lock(dev);
pm_runtime_set_autosuspend_delay(dev, delay);
+ device_unlock(dev);
return n;
}
diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c
index c80e138b62f..af10abecb99 100644
--- a/drivers/base/power/trace.c
+++ b/drivers/base/power/trace.c
@@ -112,7 +112,7 @@ static unsigned int read_magic_time(void)
unsigned int val;
get_rtc_time(&time);
- pr_info("Time: %2d:%02d:%02d Date: %02d/%02d/%02d\n",
+ pr_info("RTC time: %2d:%02d:%02d, date: %02d/%02d/%02d\n",
time.tm_hour, time.tm_min, time.tm_sec,
time.tm_mon + 1, time.tm_mday, time.tm_year % 100);
val = time.tm_year; /* 100 years */
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index 548708c4b2b..a7346ab97a3 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -606,7 +606,7 @@ static int apm_suspend_notifier(struct notifier_block *nb,
return NOTIFY_OK;
/* interrupted by signal */
- return NOTIFY_BAD;
+ return notifier_from_errno(err);
case PM_POST_SUSPEND:
/*
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 46767c53917..12d1e81a8ab 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -18,6 +18,7 @@
#include <linux/sched.h>
#include <linux/cpu.h>
#include <linux/pm_runtime.h>
+#include <linux/suspend.h>
#include "pci.h"
struct pci_dynid {
@@ -616,6 +617,21 @@ static int pci_pm_prepare(struct device *dev)
int error = 0;
/*
+ * If a PCI device configured to wake up the system from sleep states
+ * has been suspended at run time and there's a resume request pending
+ * for it, this is equivalent to the device signaling wakeup, so the
+ * system suspend operation should be aborted.
+ */
+ pm_runtime_get_noresume(dev);
+ if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
+ pm_wakeup_event(dev, 0);
+
+ if (pm_wakeup_pending()) {
+ pm_runtime_put_sync(dev);
+ return -EBUSY;
+ }
+
+ /*
* PCI devices suspended at run time need to be resumed at this
* point, because in general it is necessary to reconfigure them for
* system suspend. Namely, if the device is supposed to wake up the
@@ -624,7 +640,7 @@ static int pci_pm_prepare(struct device *dev)
* system from the sleep state, we'll have to prevent it from signaling
* wake-up.
*/
- pm_runtime_get_sync(dev);
+ pm_runtime_resume(dev);
if (drv && drv->pm && drv->pm->prepare)
error = drv->pm->prepare(dev);
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
index 12ef9121d4f..11312f401c7 100644
--- a/drivers/s390/char/vmwatchdog.c
+++ b/drivers/s390/char/vmwatchdog.c
@@ -258,13 +258,13 @@ static int vmwdt_suspend(void)
if (test_and_set_bit(VMWDT_OPEN, &vmwdt_is_open)) {
pr_err("The system cannot be suspended while the watchdog"
" is in use\n");
- return NOTIFY_BAD;
+ return notifier_from_errno(-EBUSY);
}
if (test_bit(VMWDT_RUNNING, &vmwdt_is_open)) {
clear_bit(VMWDT_OPEN, &vmwdt_is_open);
pr_err("The system cannot be suspended while the watchdog"
" is running\n");
- return NOTIFY_BAD;
+ return notifier_from_errno(-EBUSY);
}
return NOTIFY_DONE;
}
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index c47b25fd3f4..92d7324acb1 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -814,8 +814,8 @@ static int css_power_event(struct notifier_block *this, unsigned long event,
mutex_unlock(&css->mutex);
continue;
}
- if (__chsc_do_secm(css, 0))
- ret = NOTIFY_BAD;
+ ret = __chsc_do_secm(css, 0);
+ ret = notifier_from_errno(ret);
mutex_unlock(&css->mutex);
}
break;
@@ -831,8 +831,8 @@ static int css_power_event(struct notifier_block *this, unsigned long event,
mutex_unlock(&css->mutex);
continue;
}
- if (__chsc_do_secm(css, 1))
- ret = NOTIFY_BAD;
+ ret = __chsc_do_secm(css, 1);
+ ret = notifier_from_errno(ret);
mutex_unlock(&css->mutex);
}
/* search for subchannels, which appeared during hibernation */
diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index d70e91ae60a..d82a023a901 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -144,9 +144,9 @@ int scsi_autopm_get_device(struct scsi_device *sdev)
int err;
err = pm_runtime_get_sync(&sdev->sdev_gendev);
- if (err < 0)
+ if (err < 0 && err !=-EACCES)
pm_runtime_put_sync(&sdev->sdev_gendev);
- else if (err > 0)
+ else
err = 0;
return err;
}
@@ -173,9 +173,9 @@ int scsi_autopm_get_host(struct Scsi_Host *shost)
int err;
err = pm_runtime_get_sync(&shost->shost_gendev);
- if (err < 0)
+ if (err < 0 && err !=-EACCES)
pm_runtime_put_sync(&shost->shost_gendev);
- else if (err > 0)
+ else
err = 0;
return err;
}
diff --git a/include/linux/device.h b/include/linux/device.h
index e4f62d8896b..160d4ddb249 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -516,7 +516,7 @@ struct device_dma_parameters {
* minimizes board-specific #ifdefs in drivers.
* @power: For device power management.
* See Documentation/power/devices.txt for details.
- * @pwr_domain: Provide callbacks that are executed during system suspend,
+ * @pm_domain: Provide callbacks that are executed during system suspend,
* hibernation, system resume and during runtime PM transitions
* along with subsystem-level and driver-level callbacks.
* @numa_node: NUMA node this device is close to.
@@ -567,7 +567,7 @@ struct device {
void *platform_data; /* Platform specific data, device
core doesn't touch it */
struct dev_pm_info power;
- struct dev_power_domain *pwr_domain;
+ struct dev_pm_domain *pm_domain;
#ifdef CONFIG_NUMA
int numa_node; /* NUMA node this device is close to */
diff --git a/include/linux/opp.h b/include/linux/opp.h
index 5449945d589..7020e9736fc 100644
--- a/include/linux/opp.h
+++ b/include/linux/opp.h
@@ -94,12 +94,20 @@ static inline int opp_disable(struct device *dev, unsigned long freq)
#if defined(CONFIG_CPU_FREQ) && defined(CONFIG_PM_OPP)
int opp_init_cpufreq_table(struct device *dev,
struct cpufreq_frequency_table **table);
+void opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table);
#else
static inline int opp_init_cpufreq_table(struct device *dev,
struct cpufreq_frequency_table **table)
{
return -EINVAL;
}
+
+static inline
+void opp_free_cpufreq_table(struct device *dev,
+ struct cpufreq_frequency_table **table)
+{
+}
#endif /* CONFIG_CPU_FREQ */
#endif /* __LINUX_OPP_H__ */
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 411e4f4be52..f7c84c9abd3 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -461,8 +461,8 @@ struct dev_pm_info {
unsigned long active_jiffies;
unsigned long suspended_jiffies;
unsigned long accounting_timestamp;
- void *subsys_data; /* Owned by the subsystem. */
#endif
+ void *subsys_data; /* Owned by the subsystem. */
};
extern void update_pm_runtime_accounting(struct device *dev);
@@ -472,7 +472,7 @@ extern void update_pm_runtime_accounting(struct device *dev);
* hibernation, system resume and during runtime PM transitions along with
* subsystem-level and driver-level callbacks.
*/
-struct dev_power_domain {
+struct dev_pm_domain {
struct dev_pm_ops ops;
};
@@ -553,11 +553,17 @@ extern void __suspend_report_result(const char *function, void *fn, int ret);
extern int device_pm_wait_for_dev(struct device *sub, struct device *dev);
extern int pm_generic_prepare(struct device *dev);
+extern int pm_generic_suspend_noirq(struct device *dev);
extern int pm_generic_suspend(struct device *dev);
+extern int pm_generic_resume_noirq(struct device *dev);
extern int pm_generic_resume(struct device *dev);
+extern int pm_generic_freeze_noirq(struct device *dev);
extern int pm_generic_freeze(struct device *dev);
+extern int pm_generic_thaw_noirq(struct device *dev);
extern int pm_generic_thaw(struct device *dev);
+extern int pm_generic_restore_noirq(struct device *dev);
extern int pm_generic_restore(struct device *dev);
+extern int pm_generic_poweroff_noirq(struct device *dev);
extern int pm_generic_poweroff(struct device *dev);
extern void pm_generic_complete(struct device *dev);
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
new file mode 100644
index 00000000000..21097cb086f
--- /dev/null
+++ b/include/linux/pm_domain.h
@@ -0,0 +1,108 @@
+/*
+ * pm_domain.h - Definitions and headers related to device power domains.
+ *
+ * Copyright (C) 2011 Rafael J. Wysocki <rjw@sisk.pl>, Renesas Electronics Corp.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef _LINUX_PM_DOMAIN_H
+#define _LINUX_PM_DOMAIN_H
+
+#include <linux/device.h>
+
+enum gpd_status {
+ GPD_STATE_ACTIVE = 0, /* PM domain is active */
+ GPD_STATE_BUSY, /* Something is happening to the PM domain */
+ GPD_STATE_REPEAT, /* Power off in progress, to be repeated */
+ GPD_STATE_POWER_OFF, /* PM domain is off */
+};
+
+struct dev_power_governor {
+ bool (*power_down_ok)(struct dev_pm_domain *domain);
+};
+
+struct generic_pm_domain {
+ struct dev_pm_domain domain; /* PM domain operations */
+ struct list_head gpd_list_node; /* Node in the global PM domains list */
+ struct list_head sd_node; /* Node in the parent's subdomain list */
+ struct generic_pm_domain *parent; /* Parent PM domain */
+ struct list_head sd_list; /* List of dubdomains */
+ struct list_head dev_list; /* List of devices */
+ struct mutex lock;
+ struct dev_power_governor *gov;
+ struct work_struct power_off_work;
+ unsigned int in_progress; /* Number of devices being suspended now */
+ unsigned int sd_count; /* Number of subdomains with power "on" */
+ enum gpd_status status; /* Current state of the domain */
+ wait_queue_head_t status_wait_queue;
+ struct task_struct *poweroff_task; /* Powering off task */
+ unsigned int resume_count; /* Number of devices being resumed */
+ unsigned int device_count; /* Number of devices */
+ unsigned int suspended_count; /* System suspend device counter */
+ unsigned int prepared_count; /* Suspend counter of prepared devices */
+ bool suspend_power_off; /* Power status before system suspend */
+ int (*power_off)(struct generic_pm_domain *domain);
+ int (*power_on)(struct generic_pm_domain *domain);
+ int (*start_device)(struct device *dev);
+ int (*stop_device)(struct device *dev);
+ bool (*active_wakeup)(struct device *dev);
+};
+
+static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
+{
+ return container_of(pd, struct generic_pm_domain, domain);
+}
+
+struct dev_list_entry {
+ struct list_head node;
+ struct device *dev;
+ bool need_restore;
+};
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+extern int pm_genpd_add_device(struct generic_pm_domain *genpd,
+ struct device *dev);
+extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
+ struct device *dev);
+extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *new_subdomain);
+extern int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *target);
+extern void pm_genpd_init(struct generic_pm_domain *genpd,
+ struct dev_power_governor *gov, bool is_off);
+extern int pm_genpd_poweron(struct generic_pm_domain *genpd);
+extern void pm_genpd_poweroff_unused(void);
+extern void genpd_queue_power_off_work(struct generic_pm_domain *genpd);
+#else
+static inline int pm_genpd_add_device(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ return -ENOSYS;
+}
+static inline int pm_genpd_remove_device(struct generic_pm_domain *genpd,
+ struct device *dev)
+{
+ return -ENOSYS;
+}
+static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *new_sd)
+{
+ return -ENOSYS;
+}
+static inline int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
+ struct generic_pm_domain *target)
+{
+ return -ENOSYS;
+}
+static inline void pm_genpd_init(struct generic_pm_domain *genpd,
+ struct dev_power_governor *gov, bool is_off) {}
+static inline int pm_genpd_poweron(struct generic_pm_domain *genpd)
+{
+ return -ENOSYS;
+}
+static inline void pm_genpd_poweroff_unused(void) {}
+static inline void genpd_queue_power_off_work(struct generic_pm_domain *gpd) {}
+#endif
+
+#endif /* _LINUX_PM_DOMAIN_H */
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 878cf84baeb..daac05d751b 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -82,6 +82,11 @@ static inline bool pm_runtime_suspended(struct device *dev)
&& !dev->power.disable_depth;
}
+static inline bool pm_runtime_status_suspended(struct device *dev)
+{
+ return dev->power.runtime_status == RPM_SUSPENDED;
+}
+
static inline bool pm_runtime_enabled(struct device *dev)
{
return !dev->power.disable_depth;
@@ -130,6 +135,7 @@ static inline void pm_runtime_put_noidle(struct device *dev) {}
static inline bool device_run_wake(struct device *dev) { return false; }
static inline void device_set_run_wake(struct device *dev, bool enable) {}
static inline bool pm_runtime_suspended(struct device *dev) { return false; }
+static inline bool pm_runtime_status_suspended(struct device *dev) { return false; }
static inline bool pm_runtime_enabled(struct device *dev) { return false; }
static inline int pm_generic_runtime_idle(struct device *dev) { return 0; }
@@ -247,41 +253,41 @@ static inline void pm_runtime_dont_use_autosuspend(struct device *dev)
struct pm_clk_notifier_block {
struct notifier_block nb;
- struct dev_power_domain *pwr_domain;
+ struct dev_pm_domain *pm_domain;
char *con_ids[];
};
-#ifdef CONFIG_PM_RUNTIME_CLK
-extern int pm_runtime_clk_init(struct device *dev);
-extern void pm_runtime_clk_destroy(struct device *dev);
-extern int pm_runtime_clk_add(struct device *dev, const char *con_id);
-extern void pm_runtime_clk_remove(struct device *dev, const char *con_id);
-extern int pm_runtime_clk_suspend(struct device *dev);
-extern int pm_runtime_clk_resume(struct device *dev);
+#ifdef CONFIG_PM_CLK
+extern int pm_clk_init(struct device *dev);
+extern void pm_clk_destroy(struct device *dev);
+extern int pm_clk_add(struct device *dev, const char *con_id);
+extern void pm_clk_remove(struct device *dev, const char *con_id);
+extern int pm_clk_suspend(struct device *dev);
+extern int pm_clk_resume(struct device *dev);
#else
-static inline int pm_runtime_clk_init(struct device *dev)
+static inline int pm_clk_init(struct device *dev)
{
return -EINVAL;
}
-static inline void pm_runtime_clk_destroy(struct device *dev)
+static inline void pm_clk_destroy(struct device *dev)
{
}
-static inline int pm_runtime_clk_add(struct device *dev, const char *con_id)
+static inline int pm_clk_add(struct device *dev, const char *con_id)
{
return -EINVAL;
}
-static inline void pm_runtime_clk_remove(struct device *dev, const char *con_id)
+static inline void pm_clk_remove(struct device *dev, const char *con_id)
{
}
-#define pm_runtime_clock_suspend NULL
-#define pm_runtime_clock_resume NULL
+#define pm_clk_suspend NULL
+#define pm_clk_resume NULL
#endif
#ifdef CONFIG_HAVE_CLK
-extern void pm_runtime_clk_add_notifier(struct bus_type *bus,
+extern void pm_clk_add_notifier(struct bus_type *bus,
struct pm_clk_notifier_block *clknb);
#else
-static inline void pm_runtime_clk_add_notifier(struct bus_type *bus,
+static inline void pm_clk_add_notifier(struct bus_type *bus,
struct pm_clk_notifier_block *clknb)
{
}
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 083ffea7ba1..e1e3742733b 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -92,6 +92,13 @@ typedef int __bitwise suspend_state_t;
* @enter() and @wake(), even if any of them fails. It is executed after
* a failing @prepare.
*
+ * @suspend_again: Returns whether the system should suspend again (true) or
+ * not (false). If the platform wants to poll sensors or execute some
+ * code during suspended without invoking userspace and most of devices,
+ * suspend_again callback is the place assuming that periodic-wakeup or
+ * alarm-wakeup is already setup. This allows to execute some codes while
+ * being kept suspended in the view of userland and devices.
+ *
* @end: Called by the PM core right after resuming devices, to indicate to
* the platform that the system has returned to the working state or
* the transition to the sleep state has been aborted.
@@ -113,6 +120,7 @@ struct platform_suspend_ops {
int (*enter)(suspend_state_t state);
void (*wake)(void);
void (*finish)(void);
+ bool (*suspend_again)(void);
void (*end)(void);
void (*recover)(void);
};
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 87f4d24b55b..7b856b3458d 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -224,6 +224,10 @@ config PM_OPP
implementations a ready to use framework to manage OPPs.
For more information, read <file:Documentation/power/opp.txt>
-config PM_RUNTIME_CLK
+config PM_CLK
def_bool y
- depends on PM_RUNTIME && HAVE_CLK
+ depends on PM && HAVE_CLK
+
+config PM_GENERIC_DOMAINS
+ bool
+ depends on PM
diff --git a/kernel/power/main.c b/kernel/power/main.c
index 2981af4ce7c..6c601f87196 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -37,8 +37,9 @@ EXPORT_SYMBOL_GPL(unregister_pm_notifier);
int pm_notifier_call_chain(unsigned long val)
{
- return (blocking_notifier_call_chain(&pm_chain_head, val, NULL)
- == NOTIFY_BAD) ? -EINVAL : 0;
+ int ret = blocking_notifier_call_chain(&pm_chain_head, val, NULL);
+
+ return notifier_to_errno(ret);
}
/* If set, devices may be suspended and resumed asynchronously. */
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 1c41ba21541..b6b71ad2208 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -44,6 +44,7 @@ void suspend_set_ops(const struct platform_suspend_ops *ops)
suspend_ops = ops;
mutex_unlock(&pm_mutex);
}
+EXPORT_SYMBOL_GPL(suspend_set_ops);
bool valid_state(suspend_state_t state)
{
@@ -65,6 +66,7 @@ int suspend_valid_only_mem(suspend_state_t state)
{
return state == PM_SUSPEND_MEM;
}
+EXPORT_SYMBOL_GPL(suspend_valid_only_mem);
static int suspend_test(int level)
{
@@ -126,12 +128,13 @@ void __attribute__ ((weak)) arch_suspend_enable_irqs(void)
}
/**
- * suspend_enter - enter the desired system sleep state.
- * @state: state to enter
+ * suspend_enter - enter the desired system sleep state.
+ * @state: State to enter
+ * @wakeup: Returns information that suspend should not be entered again.
*
- * This function should be called after devices have been suspended.
+ * This function should be called after devices have been suspended.
*/
-static int suspend_enter(suspend_state_t state)
+static int suspend_enter(suspend_state_t state, bool *wakeup)
{
int error;
@@ -165,7 +168,8 @@ static int suspend_enter(suspend_state_t state)
error = syscore_suspend();
if (!error) {
- if (!(suspend_test(TEST_CORE) || pm_wakeup_pending())) {
+ *wakeup = pm_wakeup_pending();
+ if (!(suspend_test(TEST_CORE) || *wakeup)) {
error = suspend_ops->enter(state);
events_check_enabled = false;
}
@@ -199,6 +203,7 @@ static int suspend_enter(suspend_state_t state)
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
+ bool wakeup = false;
if (!suspend_ops)
return -ENOSYS;
@@ -220,7 +225,10 @@ int suspend_devices_and_enter(suspend_state_t state)
if (suspend_test(TEST_DEVICES))
goto Recover_platform;
- error = suspend_enter(state);
+ do {
+ error = suspend_enter(state, &wakeup);
+ } while (!error && !wakeup
+ && suspend_ops->suspend_again && suspend_ops->suspend_again());
Resume_devices:
suspend_test_start();