diff options
| -rw-r--r-- | Documentation/video4linux/CARDLIST.saa7134 | 1 | ||||
| -rw-r--r-- | drivers/media/video/saa7134/saa7134-cards.c | 36 | ||||
| -rw-r--r-- | drivers/media/video/saa7134/saa7134-dvb.c | 54 | ||||
| -rw-r--r-- | drivers/media/video/saa7134/saa7134.h | 1 |
4 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 9068b669f5e..fc1752b48b5 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -94,3 +94,4 @@ 93 -> Medion 7134 Bridge #2 [16be:0005] 94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502] 95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138] + 96 -> Medion Md8800 Quadro [16be:0007,16be:0008] diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 927413aded1..99f2e642130 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -2891,6 +2891,29 @@ struct saa7134_board saa7134_boards[] = { .gpio = 0x8000, }, }, + [SAA7134_BOARD_MEDION_MD8800_QUADRO] = { + .name = "Medion Md8800 Quadro", + .audio_clock = 0x00187de7, + .tuner_type = TUNER_PHILIPS_TDA8290, + .radio_type = UNSET, + .tuner_addr = ADDR_UNSET, + .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, + .inputs = {{ + .name = name_tv, + .vmux = 1, + .amux = TV, + .tv = 1, + },{ + .name = name_comp1, + .vmux = 0, + .amux = LINE2, + },{ + .name = name_svideo, + .vmux = 8, + .amux = LINE2, + }}, + }, }; const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards); @@ -3446,6 +3469,18 @@ struct pci_device_id saa7134_pci_tbl[] = { .subdevice = 0x3502, /* whats the difference to 0x3306 ?*/ .driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS, },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x0007, + .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO, + },{ + .vendor = PCI_VENDOR_ID_PHILIPS, + .device = PCI_DEVICE_ID_PHILIPS_SAA7133, + .subvendor = 0x16be, + .subdevice = 0x0008, + .driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO, + },{ /* --- boards without eeprom + subsystem ID --- */ .vendor = PCI_VENDOR_ID_PHILIPS, .device = PCI_DEVICE_ID_PHILIPS_SAA7134, @@ -3732,6 +3767,7 @@ int saa7134_board_init2(struct saa7134_dev *dev) case SAA7134_BOARD_PHILIPS_TIGER: case SAA7134_BOARD_TEVION_DVBT_220RF: case SAA7134_BOARD_ASUSTeK_P7131_DUAL: + case SAA7134_BOARD_MEDION_MD8800_QUADRO: /* this is a hybrid board, initialize to analog mode * and configure firmware eeprom address */ diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 279828b8f29..2ffa5b5790a 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -969,6 +969,51 @@ static struct tda1004x_config tevion_dvbt220rf_config = { .request_firmware = NULL, }; +/* ------------------------------------------------------------------ */ + +static int md8800_dvbt_analog_mode(struct dvb_frontend *fe) +{ + struct saa7134_dev *dev = fe->dvb->priv; + static u8 data[] = { 0x3c, 0x33, 0x68}; + struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)}; + + i2c_transfer(&dev->i2c_adap, &msg, 1); + philips_tda827xa_tuner_sleep( 0x61, fe); + return 0; +} + +static int md8800_dvbt_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) +{ + int ret; + struct saa7134_dev *dev = fe->dvb->priv; + static u8 tda8290_close[] = { 0x21, 0xc0}; + static u8 tda8290_open[] = { 0x21, 0x80}; + struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2}; + /* close tda8290 i2c bridge */ + tda8290_msg.buf = tda8290_close; + ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); + if (ret != 1) + return -EIO; + msleep(20); + ret = philips_tda827xa_pll_set(0x60, fe, params); + if (ret != 0) + return ret; + /* open tda8290 i2c bridge */ + tda8290_msg.buf = tda8290_open; + i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1); + return ret; +} + +static struct tda1004x_config md8800_dvbt_config = { + .demod_address = 0x08, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_TDA827X, + .if_freq = TDA10046_FREQ_045, + .request_firmware = NULL, +}; + #endif /* ------------------------------------------------------------------ */ @@ -1153,6 +1198,15 @@ static int dvb_init(struct saa7134_dev *dev) dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params; } break; + case SAA7134_BOARD_MEDION_MD8800_QUADRO: + dev->dvb.frontend = tda10046_attach(&md8800_dvbt_config, + &dev->i2c_adap); + if (dev->dvb.frontend) { + dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init; + dev->dvb.frontend->ops.tuner_ops.sleep = md8800_dvbt_analog_mode; + dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set; + } + break; #endif #ifdef HAVE_NXT200X case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index c04ce6152fd..e3739b893ca 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -223,6 +223,7 @@ struct saa7134_format { #define SAA7134_BOARD_MD7134_BRIDGE_2 93 #define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94 #define SAA7134_BOARD_FLYVIDEO3000_NTSC 95 +#define SAA7134_BOARD_MEDION_MD8800_QUADRO 96 #define SAA7134_MAXBOARDS 8 #define SAA7134_INPUT_MAX 8 |