diff options
26 files changed, 802 insertions, 0 deletions
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README new file mode 100644 index 00000000000..87a1e8fb624 --- /dev/null +++ b/Documentation/arm/sunxi/README @@ -0,0 +1,19 @@ +ARM Allwinner SoCs +================== + +This document lists all the ARM Allwinner SoCs that are currently +supported in mainline by the Linux kernel. This document will also +provide links to documentation and or datasheet for these SoCs. + +SunXi family +------------ + + Flavors: + Allwinner A10 (sun4i) + Datasheet : http://dl.linux-sunxi.org/A10/A10%20Datasheet%20-%20v1.21%20%282012-04-06%29.pdf + + Allwinner A13 (sun5i) + Datasheet : http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf + + Core: Cortex A8 + Linux kernel mach directory: arch/arm/mach-sunxi
\ No newline at end of file diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt new file mode 100644 index 00000000000..7f9fb85f545 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-ic.txt @@ -0,0 +1,104 @@ +Allwinner Sunxi Interrupt Controller + +Required properties: + +- compatible : should be "allwinner,sunxi-ic" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +The interrupt sources are as follows: + +0: ENMI +1: UART0 +2: UART1 +3: UART2 +4: UART3 +5: IR0 +6: IR1 +7: I2C0 +8: I2C1 +9: I2C2 +10: SPI0 +11: SPI1 +12: SPI2 +13: SPDIF +14: AC97 +15: TS +16: I2S +17: UART4 +18: UART5 +19: UART6 +20: UART7 +21: KEYPAD +22: TIMER0 +23: TIMER1 +24: TIMER2 +25: TIMER3 +26: CAN +27: DMA +28: PIO +29: TOUCH_PANEL +30: AUDIO_CODEC +31: LRADC +32: SDMC0 +33: SDMC1 +34: SDMC2 +35: SDMC3 +36: MEMSTICK +37: NAND +38: USB0 +39: USB1 +40: USB2 +41: SCR +42: CSI0 +43: CSI1 +44: LCDCTRL0 +45: LCDCTRL1 +46: MP +47: DEFEBE0 +48: DEFEBE1 +49: PMU +50: SPI3 +51: TZASC +52: PATA +53: VE +54: SS +55: EMAC +56: SATA +57: GPS +58: HDMI +59: TVE +60: ACE +61: TVD +62: PS2_0 +63: PS2_1 +64: USB3 +65: USB4 +66: PLE_PFM +67: TIMER4 +68: TIMER5 +69: GPU_GP +70: GPU_GPMMU +71: GPU_PP0 +72: GPU_PPMMU0 +73: GPU_PMU +74: GPU_RSV0 +75: GPU_RSV1 +76: GPU_RSV2 +77: GPU_RSV3 +78: GPU_RSV4 +79: GPU_RSV5 +80: GPU_RSV6 +82: SYNC_TIMER0 +83: SYNC_TIMER1 + +Example: + +intc: interrupt-controller { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt b/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt new file mode 100644 index 00000000000..0c7b64e95a6 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sunxi-timer.txt @@ -0,0 +1,17 @@ +Allwinner A1X SoCs Timer Controller + +Required properties: + +- compatible : should be "allwinner,sunxi-timer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupt of the first timer +- clocks: phandle to the source clock (usually a 24 MHz fixed clock) + +Example: + +timer { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>; + clocks = <&osc>; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 99199e63f34..12bd27e452e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -685,6 +685,12 @@ M: Lennert Buytenhek <kernel@wantstofly.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained +ARM/Allwinner A1X SoC support +M: Maxime Ripard <maxime.ripard@free-electrons.com> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-sunxi/ + ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES M: Andrew Victor <linux@maxim.org.za> M: Nicolas Ferre <nicolas.ferre@atmel.com> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c1cc4f79e4f..6c1d0198553 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1102,6 +1102,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-sunxi/Kconfig" + source "arch/arm/mach-prima2/Kconfig" source "arch/arm/mach-tegra/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5566520686a..4c336c3c4d7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -345,6 +345,13 @@ choice Say Y here if you want kernel low-level debugging support on SOCFPGA based platforms. + config DEBUG_SUNXI_UART1 + bool "Kernel low-level debugging messages via sunXi UART1" + depends on ARCH_SUNXI + help + Say Y here if you want kernel low-level debugging support + on Allwinner A1X based platforms on the UART1. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -424,6 +431,7 @@ config DEBUG_LL_INCLUDE default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/socfpga.S" if DEBUG_SOCFPGA_UART + default "debug/sunxi.S" if DEBUG_SUNXI_UART1 default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 default "mach/debug-macro.S" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 20891216782..58afa0dfcf7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -194,6 +194,7 @@ machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx machine-$(CONFIG_MACH_SPEAR600) += spear6xx machine-$(CONFIG_ARCH_ZYNQ) += zynq +machine-$(CONFIG_ARCH_SUNXI) += sunxi # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc803c92a72..22e4ac9a4e7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear310-evb.dtb \ spear320-evb.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun5i-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ diff --git a/arch/arm/boot/dts/sun5i-olinuxino.dts b/arch/arm/boot/dts/sun5i-olinuxino.dts new file mode 100644 index 00000000000..3b1cce3af7c --- /dev/null +++ b/arch/arm/boot/dts/sun5i-olinuxino.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i.dtsi" + +/ { + model = "Olimex A13-Olinuxino"; + compatible = "olimex,a13-olinuxino", "allwinner,sun5i"; + + soc { + duart: uart@01c28400 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 00000000000..4bedf3e826e --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01c20000 0x300000>; + ranges; + + timer@01c20c00 { + compatible = "allwinner,sunxi-timer"; + reg = <0x01c20c00 0x400>; + interrupts = <22>; + clocks = <&osc>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sunxi-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: uart@01c28400 { + compatible = "ns8250"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + clock-frequency = <24000000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/include/debug/sunxi.S b/arch/arm/include/debug/sunxi.S new file mode 100644 index 00000000000..3bf61ca0df7 --- /dev/null +++ b/arch/arm/include/debug/sunxi.S @@ -0,0 +1,24 @@ +/* + * Early serial output macro for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_DEBUG_SUNXI_UART1 +#define SUNXI_UART_DEBUG_PHYS_BASE 0x01c28400 +#define SUNXI_UART_DEBUG_VIRT_BASE 0xf1c28400 +#endif + + .macro addruart, rp, rv, tmp + ldr \rp, =SUNXI_UART_DEBUG_PHYS_BASE + ldr \rv, =SUNXI_UART_DEBUG_VIRT_BASE + .endm + +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig new file mode 100644 index 00000000000..3fdd0085e30 --- /dev/null +++ b/arch/arm/mach-sunxi/Kconfig @@ -0,0 +1,9 @@ +config ARCH_SUNXI + bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select PINCTRL + select SPARSE_IRQ + select SUNXI_TIMER diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile new file mode 100644 index 00000000000..93bebfc3ff9 --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_SUNXI) += sunxi.o diff --git a/arch/arm/mach-sunxi/Makefile.boot b/arch/arm/mach-sunxi/Makefile.boot new file mode 100644 index 00000000000..46d4cf0841c --- /dev/null +++ b/arch/arm/mach-sunxi/Makefile.boot @@ -0,0 +1 @@ +zreladdr-$(CONFIG_ARCH_SUNXI) += 0x40008000 diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c new file mode 100644 index 00000000000..8f42df8af1d --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.c @@ -0,0 +1,60 @@ +/* + * Device Tree support for Allwinner A1X SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/io.h> +#include <linux/sunxi_timer.h> + +#include <linux/irqchip/sunxi.h> + +#include <asm/hardware/vic.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "sunxi.h" + +static struct map_desc sunxi_io_desc[] __initdata = { + { + .virtual = (unsigned long) SUNXI_REGS_VIRT_BASE, + .pfn = __phys_to_pfn(SUNXI_REGS_PHYS_BASE), + .length = SUNXI_REGS_SIZE, + .type = MT_DEVICE, + }, +}; + +void __init sunxi_map_io(void) +{ + iotable_init(sunxi_io_desc, ARRAY_SIZE(sunxi_io_desc)); +} + +static void __init sunxi_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static const char * const sunxi_board_dt_compat[] = { + "allwinner,sun5i", + NULL, +}; + +DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") + .init_machine = sunxi_dt_init, + .map_io = sunxi_map_io, + .init_irq = sunxi_init_irq, + .handle_irq = sunxi_handle_irq, + .timer = &sunxi_timer, + .dt_compat = sunxi_board_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-sunxi/sunxi.h b/arch/arm/mach-sunxi/sunxi.h new file mode 100644 index 00000000000..33b58712ade --- /dev/null +++ b/arch/arm/mach-sunxi/sunxi.h @@ -0,0 +1,20 @@ +/* + * Generic definitions for Allwinner SunXi SoCs + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_SUNXI_H +#define __MACH_SUNXI_H + +#define SUNXI_REGS_PHYS_BASE 0x01c00000 +#define SUNXI_REGS_VIRT_BASE IOMEM(0xf1c00000) +#define SUNXI_REGS_SIZE (SZ_2M + SZ_1M) + +#endif /* __MACH_SUNXI_H */ diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de0..9c300a828ed 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -19,6 +19,7 @@ endif obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o +obj-$(CONFIG_ARCH_SUNXI) += clk-sunxi.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o diff --git a/drivers/clk/clk-sunxi.c b/drivers/clk/clk-sunxi.c new file mode 100644 index 00000000000..0e831b584ba --- /dev/null +++ b/drivers/clk/clk-sunxi.c @@ -0,0 +1,30 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/sunxi.h> +#include <linux/of.h> + +static const __initconst struct of_device_id clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + {} +}; + +void __init sunxi_init_clocks(void) +{ + of_clk_init(clk_match); +} diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 6a78073c380..a0985732f1e 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -22,6 +22,9 @@ config DW_APB_TIMER_OF config ARMADA_370_XP_TIMER bool +config SUNXI_TIMER + bool + config CLKSRC_DBX500_PRCMU bool "Clocksource PRCMU Timer" depends on UX500_SOC_DB8500 diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 603be366f76..36f06de4c5a 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -14,5 +14,6 @@ obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o +obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c new file mode 100644 index 00000000000..3c46434b64c --- /dev/null +++ b/drivers/clocksource/sunxi_timer.c @@ -0,0 +1,170 @@ +/* + * Allwinner A1X SoCs timer handling. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Benn Huang <benn@allwinnertech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clockchips.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irqreturn.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sunxi_timer.h> +#include <linux/clk/sunxi.h> + +#define TIMER_CTL_REG 0x00 +#define TIMER_CTL_ENABLE (1 << 0) +#define TIMER_IRQ_ST_REG 0x04 +#define TIMER0_CTL_REG 0x10 +#define TIMER0_CTL_ENABLE (1 << 0) +#define TIMER0_CTL_AUTORELOAD (1 << 1) +#define TIMER0_CTL_ONESHOT (1 << 7) +#define TIMER0_INTVAL_REG 0x14 +#define TIMER0_CNTVAL_REG 0x18 + +#define TIMER_SCAL 16 + +static void __iomem *timer_base; + +static void sunxi_clkevt_mode(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + u32 u = readl(timer_base + TIMER0_CTL_REG); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + u &= ~(TIMER0_CTL_ONESHOT); + writel(u | TIMER0_CTL_ENABLE, timer_base + TIMER0_CTL_REG); + break; + + case CLOCK_EVT_MODE_ONESHOT: + writel(u | TIMER0_CTL_ONESHOT, timer_base + TIMER0_CTL_REG); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + default: + writel(u & ~(TIMER0_CTL_ENABLE), timer_base + TIMER0_CTL_REG); + break; + } +} + +static int sunxi_clkevt_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + u32 u = readl(timer_base + TIMER0_CTL_REG); + writel(evt, timer_base + TIMER0_CNTVAL_REG); + writel(u | TIMER0_CTL_ENABLE | TIMER0_CTL_AUTORELOAD, + timer_base + TIMER0_CTL_REG); + + return 0; +} + +static struct clock_event_device sunxi_clockevent = { + .name = "sunxi_tick", + .shift = 32, + .rating = 300, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sunxi_clkevt_mode, + .set_next_event = sunxi_clkevt_next_event, +}; + + +static irqreturn_t sunxi_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + writel(0x1, timer_base + TIMER_IRQ_ST_REG); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction sunxi_timer_irq = { + .name = "sunxi_timer0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = sunxi_timer_interrupt, + .dev_id = &sunxi_clockevent, +}; + +static struct of_device_id sunxi_timer_dt_ids[] = { + { .compatible = "allwinner,sunxi-timer" }, +}; + +static void __init sunxi_timer_init(void) +{ + struct device_node *node; + unsigned long rate = 0; + struct clk *clk; + int ret, irq; + u32 val; + + node = of_find_matching_node(NULL, sunxi_timer_dt_ids); + if (!node) + panic("No sunxi timer node"); + + timer_base = of_iomap(node, 0); + if (!timer_base) + panic("Can't map registers"); + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) + panic("Can't parse IRQ"); + + sunxi_init_clocks(); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) + panic("Can't get timer clock"); + + rate = clk_get_rate(clk); + + writel(rate / (TIMER_SCAL * HZ), + timer_base + TIMER0_INTVAL_REG); + + /* set clock source to HOSC, 16 pre-division */ + val = readl(timer_base + TIMER0_CTL_REG); + val &= ~(0x07 << 4); + val &= ~(0x03 << 2); + val |= (4 << 4) | (1 << 2); + writel(val, timer_base + TIMER0_CTL_REG); + + /* set mode to auto reload */ + val = readl(timer_base + TIMER0_CTL_REG); + writel(val | TIMER0_CTL_AUTORELOAD, timer_base + TIMER0_CTL_REG); + + ret = setup_irq(irq, &sunxi_timer_irq); + if (ret) + pr_warn("failed to setup irq %d\n", irq); + + /* Enable timer0 interrupt */ + val = readl(timer_base + TIMER_CTL_REG); + writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG); + + sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL, + NSEC_PER_SEC, + sunxi_clockevent.shift); + sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff, + &sunxi_clockevent); + sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1, + &sunxi_clockevent); + sunxi_clockevent.cpumask = cpumask_of(0); + + clockevents_register_device(&sunxi_clockevent); +} + +struct sys_timer sunxi_timer = { + .init = sunxi_timer_init, +}; diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index e2e6eb5d32f..02bd37a6187 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o diff --git a/drivers/irqchip/irq-sunxi.c b/drivers/irqchip/irq-sunxi.c new file mode 100644 index 00000000000..eef41a49aca --- /dev/null +++ b/drivers/irqchip/irq-sunxi.c @@ -0,0 +1,150 @@ +/* + * Allwinner A1X SoCs IRQ chip driver. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Benn Huang <benn@allwinnertech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <linux/irqchip/sunxi.h> + +#define SUNXI_IRQ_VECTOR_REG 0x00 +#define SUNXI_IRQ_PROTECTION_REG 0x08 +#define SUNXI_IRQ_NMI_CTRL_REG 0x0c +#define SUNXI_IRQ_PENDING_REG(x) (0x10 + 0x4 * x) +#define SUNXI_IRQ_FIQ_PENDING_REG(x) (0x20 + 0x4 * x) +#define SUNXI_IRQ_ENABLE_REG(x) (0x40 + 0x4 * x) +#define SUNXI_IRQ_MASK_REG(x) (0x50 + 0x4 * x) + +static void __iomem *sunxi_irq_base; +static struct irq_domain *sunxi_irq_domain; + +void sunxi_irq_ack(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); + writel(val | (1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_PENDING_REG(reg)); +} + +static void sunxi_irq_mask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); + writel(val & ~(1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); +} + +static void sunxi_irq_unmask(struct irq_data *irqd) +{ + unsigned int irq = irqd_to_hwirq(irqd); + unsigned int irq_off = irq % 32; + int reg = irq / 32; + u32 val; + + val = readl(sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); + writel(val | (1 << irq_off), + sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(reg)); +} + +static struct irq_chip sunxi_irq_chip = { + .name = "sunxi_irq", + .irq_ack = sunxi_irq_ack, + .irq_mask = sunxi_irq_mask, + .irq_unmask = sunxi_irq_unmask, +}; + +static int sunxi_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &sunxi_irq_chip, + handle_level_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops sunxi_irq_ops = { + .map = sunxi_irq_map, + .xlate = irq_domain_xlate_onecell, +}; + +static int __init sunxi_of_init(struct device_node *node, + struct device_node *parent) +{ + sunxi_irq_base = of_iomap(node, 0); + if (!sunxi_irq_base) + panic("%s: unable to map IC registers\n", + node->full_name); + + /* Disable all interrupts */ + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(0)); + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(1)); + writel(0, sunxi_irq_base + SUNXI_IRQ_ENABLE_REG(2)); + + /* Mask all the interrupts */ + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(0)); + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(1)); + writel(0, sunxi_irq_base + SUNXI_IRQ_MASK_REG(2)); + + /* Clear all the pending interrupts */ + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(0)); + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(1)); + writel(0xffffffff, sunxi_irq_base + SUNXI_IRQ_PENDING_REG(2)); + + /* Enable protection mode */ + writel(0x01, sunxi_irq_base + SUNXI_IRQ_PROTECTION_REG); + + /* Configure the external interrupt source type */ + writel(0x00, sunxi_irq_base + SUNXI_IRQ_NMI_CTRL_REG); + + sunxi_irq_domain = irq_domain_add_linear(node, 3 * 32, + &sunxi_irq_ops, NULL); + if (!sunxi_irq_domain) + panic("%s: unable to create IRQ domain\n", node->full_name); + + return 0; +} + +static struct of_device_id sunxi_irq_dt_ids[] __initconst = { + { .compatible = "allwinner,sunxi-ic", .data = sunxi_of_init } +}; + +void __init sunxi_init_irq(void) +{ + of_irq_init(sunxi_irq_dt_ids); +} + +asmlinkage void __exception_irq_entry sunxi_handle_irq(struct pt_regs *regs) +{ + u32 irq, hwirq; + + hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; + while (hwirq != 0) { + irq = irq_find_mapping(sunxi_irq_domain, hwirq); + handle_IRQ(irq, regs); + hwirq = readl(sunxi_irq_base + SUNXI_IRQ_VECTOR_REG) >> 2; + } +} diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h new file mode 100644 index 00000000000..e074fdd5a23 --- /dev/null +++ b/include/linux/clk/sunxi.h @@ -0,0 +1,22 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_CLK_SUNXI_H_ +#define __LINUX_CLK_SUNXI_H_ + +void __init sunxi_init_clocks(void); + +#endif diff --git a/include/linux/irqchip/sunxi.h b/include/linux/irqchip/sunxi.h new file mode 100644 index 00000000000..1fe2c2260e2 --- /dev/null +++ b/include/linux/irqchip/sunxi.h @@ -0,0 +1,27 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_IRQCHIP_SUNXI_H +#define __LINUX_IRQCHIP_SUNXI_H + +#include <asm/exception.h> + +extern void sunxi_init_irq(void); + +extern asmlinkage void __exception_irq_entry sunxi_handle_irq( + struct pt_regs *regs); + +#endif diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h new file mode 100644 index 00000000000..b9165bba6e6 --- /dev/null +++ b/include/linux/sunxi_timer.h @@ -0,0 +1,24 @@ +/* + * Copyright 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __SUNXI_TIMER_H +#define __SUNXI_TIMER_H + +#include <asm/mach/time.h> + +extern struct sys_timer sunxi_timer; + +#endif |