summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/include/asm/cache.h16
-rw-r--r--arch/arm/include/asm/page.h7
-rw-r--r--arch/arm/mach-mx2/clock_imx21.c2
-rw-r--r--arch/arm/mach-mx2/clock_imx27.c2
-rw-r--r--arch/arm/mach-mx3/clock-imx35.c2
-rw-r--r--arch/arm/mach-mx3/clock.c2
-rw-r--r--arch/arm/mach-pxa/devices.c5
-rw-r--r--arch/arm/mach-pxa/imote2.c2
-rw-r--r--arch/arm/mm/proc-v7.S36
-rw-r--r--drivers/serial/imx.c2
-rw-r--r--include/linux/amba/serial.h1
11 files changed, 53 insertions, 24 deletions
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index cb7a9e97fd7..feaa75f0013 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -7,4 +7,20 @@
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
#endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index e6eb8a67b80..7b522770f29 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
#include <asm-generic/page.h>
#endif
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 999d013e06e..e4b08ca804e 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -890,7 +890,7 @@ static struct clk clko_clk = {
.con_id = n, \
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
/* It's unlikely that any driver wants one of them directly:
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 3f7280c490f..2c971442f3f 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk);
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 53a112d4e04..3c1e06f56dd 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 9957a11533a..a68fcf981ed 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d245e59c51b..29970f703f3 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
}
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+ .gpio_pullup = -1,
+ .gpio_vbus = -1,
+};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2121309b247..2b27336c29f 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
*/
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
{ /* UCAM sensor board */
- .type = "max1238",
+ .type = "max1239",
.addr = 0x35,
}, { /* ITS400 Sensor board only */
.type = "max1363",
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3397f1e64d7..a08d9d2380d 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -184,23 +184,37 @@ __v7_setup:
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+
+ mrc p15, 0, r0, c0, c0, 0 @ read main ID register
+ and r10, r0, #0xff000000 @ ARM?
+ teq r10, #0x41000000
+ bne 2f
+ and r5, r0, #0x00f00000 @ variant
+ and r6, r0, #0x0000000f @ revision
+ orr r0, r6, r5, lsr #20-4 @ combine variant and revision
+
#ifdef CONFIG_ARM_ERRATA_430973
- mrc p15, 0, r10, c1, c0, 1 @ read aux control register
- orr r10, r10, #(1 << 6) @ set IBE to 1
- mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+ teq r5, #0x00100000 @ only present in r1p*
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 6) @ set IBE to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
- mrc p15, 0, r10, c1, c0, 1 @ read aux control register
- orr r10, r10, #(1 << 5) @ set L1NEON to 1
- orr r10, r10, #(1 << 9) @ set PLDNOP to 1
- mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 5) @ set L1NEON to 1
+ orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
- mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
- orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
- mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ tsteq r10, #1 << 22
+ orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
- mov r10, #0
+
+2: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c5..5f0be40dfda 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1031,6 +1031,8 @@ imx_console_setup(struct console *co, char *options)
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 48ee32a18ac..64a982ea5d5 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -159,6 +159,7 @@
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
#ifndef __ASSEMBLY__
+struct amba_device; /* in uncompress this is included but amba/bus.h is not */
struct amba_pl010_data {
void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
};
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 23:02:19 +0000