summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt12
-rw-r--r--Documentation/devicetree/bindings/pwm/mxs-pwm.txt17
-rw-r--r--Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt18
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm.txt57
-rw-r--r--Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt28
-rw-r--r--Documentation/pwm.txt76
-rw-r--r--MAINTAINERS12
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/boot/dts/tegra20.dtsi6
-rw-r--r--arch/arm/boot/dts/tegra30.dtsi6
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra20.c3
-rw-r--r--arch/arm/mach-tegra/board-dt-tegra30.c3
-rw-r--r--arch/arm/mach-vt8500/Makefile2
-rw-r--r--arch/arm/mach-vt8500/pwm.c265
-rw-r--r--arch/arm/plat-mxc/Kconfig6
-rw-r--r--arch/arm/plat-mxc/Makefile1
-rw-r--r--arch/arm/plat-pxa/Makefile1
-rw-r--r--arch/arm/plat-pxa/pwm.c304
-rw-r--r--arch/arm/plat-samsung/Makefile4
-rw-r--r--arch/blackfin/Kconfig10
-rw-r--r--arch/blackfin/kernel/Makefile1
-rw-r--r--arch/blackfin/kernel/pwm.c100
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/mfd/Kconfig1
-rw-r--r--drivers/misc/Kconfig1
-rw-r--r--drivers/pwm/Kconfig108
-rw-r--r--drivers/pwm/Makefile11
-rw-r--r--drivers/pwm/core.c713
-rw-r--r--drivers/pwm/pwm-bfin.c162
-rw-r--r--drivers/pwm/pwm-imx.c (renamed from arch/arm/plat-mxc/pwm.c)204
-rw-r--r--drivers/pwm/pwm-lpc32xx.c148
-rw-r--r--drivers/pwm/pwm-mxs.c203
-rw-r--r--drivers/pwm/pwm-pxa.c218
-rw-r--r--drivers/pwm/pwm-samsung.c (renamed from arch/arm/plat-samsung/pwm.c)234
-rw-r--r--drivers/pwm/pwm-tegra.c261
-rw-r--r--drivers/pwm/pwm-tiecap.c232
-rw-r--r--drivers/pwm/pwm-tiehrpwm.c411
-rw-r--r--drivers/pwm/pwm-vt8500.c177
-rw-r--r--drivers/video/backlight/Kconfig2
-rw-r--r--drivers/video/backlight/pwm_bl.c159
-rw-r--r--include/linux/of.h16
-rw-r--r--include/linux/pwm.h117
-rw-r--r--include/linux/pwm_backlight.h1
44 files changed, 3308 insertions, 1007 deletions
diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
new file mode 100644
index 00000000000..cfe1db3bb6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt
@@ -0,0 +1,12 @@
+LPC32XX PWM controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-pwm"
+- reg: physical base address and length of the controller's registers
+
+Examples:
+
+pwm@0x4005C000 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005C000 0x8>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
new file mode 100644
index 00000000000..b16f4a57d11
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt
@@ -0,0 +1,17 @@
+Freescale MXS PWM controller
+
+Required properties:
+- compatible: should be "fsl,imx23-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2. The first cell specifies the per-chip index
+ of the PWM to use and the second cell is the duty cycle in nanoseconds.
+- fsl,pwm-number: the number of PWM devices
+
+Example:
+
+pwm: pwm@80064000 {
+ compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
+ reg = <0x80064000 2000>;
+ #pwm-cells = <2>;
+ fsl,pwm-number = <8>;
+};
diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
new file mode 100644
index 00000000000..bbbeedb4ec0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt
@@ -0,0 +1,18 @@
+Tegra SoC PWFM controller
+
+Required properties:
+- compatible: should be one of:
+ - "nvidia,tegra20-pwm"
+ - "nvidia,tegra30-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The
+ first cell specifies the per-chip index of the PWM to use and the second
+ cell is the duty cycle in nanoseconds.
+
+Example:
+
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt
new file mode 100644
index 00000000000..73ec962bfe8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm.txt
@@ -0,0 +1,57 @@
+Specifying PWM information for devices
+======================================
+
+1) PWM user nodes
+-----------------
+
+PWM users should specify a list of PWM devices that they want to use
+with a property containing a 'pwm-list':
+
+ pwm-list ::= <single-pwm> [pwm-list]
+ single-pwm ::= <pwm-phandle> <pwm-specifier>
+ pwm-phandle : phandle to PWM controller node
+ pwm-specifier : array of #pwm-cells specifying the given PWM
+ (controller specific)
+
+PWM properties should be named "pwms". The exact meaning of each pwms
+property must be documented in the device tree binding for each device.
+An optional property "pwm-names" may contain a list of strings to label
+each of the PWM devices listed in the "pwms" property. If no "pwm-names"
+property is given, the name of the user node will be used as fallback.
+
+Drivers for devices that use more than a single PWM device can use the
+"pwm-names" property to map the name of the PWM device requested by the
+pwm_get() call to an index into the list given by the "pwms" property.
+
+The following example could be used to describe a PWM-based backlight
+device:
+
+ pwm: pwm {
+ #pwm-cells = <2>;
+ };
+
+ [...]
+
+ bl: backlight {
+ pwms = <&pwm 0 5000000>;
+ pwm-names = "backlight";
+ };
+
+pwm-specifier typically encodes the chip-relative PWM number and the PWM
+period in nanoseconds. Note that in the example above, specifying the
+"pwm-names" is redundant because the name "backlight" would be used as
+fallback anyway.
+
+2) PWM controller nodes
+-----------------------
+
+PWM controller nodes must specify the number of cells used for the
+specifier using the '#pwm-cells' property.
+
+An example PWM controller might look like this:
+
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
new file mode 100644
index 00000000000..1e4fc727f3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/backlight/pwm-backlight.txt
@@ -0,0 +1,28 @@
+pwm-backlight bindings
+
+Required properties:
+ - compatible: "pwm-backlight"
+ - pwms: OF device-tree PWM specification (see PWM binding[0])
+ - brightness-levels: Array of distinct brightness levels. Typically these
+ are in the range from 0 to 255, but any range starting at 0 will do.
+ The actual brightness level (PWM duty cycle) will be interpolated
+ from these values. 0 means a 0% duty cycle (darkest/off), while the
+ last value in the array represents a 100% duty cycle (brightest).
+ - default-brightness-level: the default brightness level (index into the
+ array defined by the "brightness-levels" property)
+
+Optional properties:
+ - pwm-names: a list of names for the PWM devices specified in the
+ "pwms" property (see PWM binding[0])
+
+[0]: Documentation/devicetree/bindings/pwm/pwm.txt
+
+Example:
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt
new file mode 100644
index 00000000000..554290ebab9
--- /dev/null
+++ b/Documentation/pwm.txt
@@ -0,0 +1,76 @@
+Pulse Width Modulation (PWM) interface
+
+This provides an overview about the Linux PWM interface
+
+PWMs are commonly used for controlling LEDs, fans or vibrators in
+cell phones. PWMs with a fixed purpose have no need implementing
+the Linux PWM API (although they could). However, PWMs are often
+found as discrete devices on SoCs which have no fixed purpose. It's
+up to the board designer to connect them to LEDs or fans. To provide
+this kind of flexibility the generic PWM API exists.
+
+Identifying PWMs
+----------------
+
+Users of the legacy PWM API use unique IDs to refer to PWM devices.
+
+Instead of referring to a PWM device via its unique ID, board setup code
+should instead register a static mapping that can be used to match PWM
+consumers to providers, as given in the following example:
+
+ static struct pwm_lookup board_pwm_lookup[] = {
+ PWM_LOOKUP("tegra-pwm", 0, "pwm-backlight", NULL),
+ };
+
+ static void __init board_init(void)
+ {
+ ...
+ pwm_add_table(board_pwm_lookup, ARRAY_SIZE(board_pwm_lookup));
+ ...
+ }
+
+Using PWMs
+----------
+
+Legacy users can request a PWM device using pwm_request() and free it
+after usage with pwm_free().
+
+New users should use the pwm_get() function and pass to it the consumer
+device or a consumer name. pwm_put() is used to free the PWM device.
+
+After being requested a PWM has to be configured using:
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns);
+
+To start/stop toggling the PWM output use pwm_enable()/pwm_disable().
+
+Implementing a PWM driver
+-------------------------
+
+Currently there are two ways to implement pwm drivers. Traditionally
+there only has been the barebone API meaning that each driver has
+to implement the pwm_*() functions itself. This means that it's impossible
+to have multiple PWM drivers in the system. For this reason it's mandatory
+for new drivers to use the generic PWM framework.
+
+A new PWM controller/chip can be added using pwmchip_add() and removed
+again with pwmchip_remove(). pwmchip_add() takes a filled in struct
+pwm_chip as argument which provides a description of the PWM chip, the
+number of PWM devices provider by the chip and the chip-specific
+implementation of the supported PWM operations to the framework.
+
+Locking
+-------
+
+The PWM core list manipulations are protected by a mutex, so pwm_request()
+and pwm_free() may not be called from an atomic context. Currently the
+PWM core does not enforce any locking to pwm_enable(), pwm_disable() and
+pwm_config(), so the calling context is currently driver specific. This
+is an issue derived from the former barebone API and should be fixed soon.
+
+Helpers
+-------
+
+Currently a PWM can only be configured with period_ns and duty_ns. For several
+use cases freq_hz and duty_percent might be better. Instead of calculating
+this in your driver please consider adding appropriate helpers to the framework.
diff --git a/MAINTAINERS b/MAINTAINERS
index bd451649f13..b141083b262 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5526,6 +5526,18 @@ S: Maintained
F: Documentation/video4linux/README.pvrusb2
F: drivers/media/video/pvrusb2/
+PWM SUBSYSTEM
+M: Thierry Reding <thierry.reding@avionic-design.de>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+W: http://gitorious.org/linux-pwm
+T: git git://gitorious.org/linux-pwm/linux-pwm.git
+F: Documentation/pwm.txt
+F: Documentation/devicetree/bindings/pwm/
+F: include/linux/pwm.h
+F: include/linux/of_pwm.h
+F: drivers/pwm/
+
PXA2xx/PXA3xx SUPPORT
M: Eric Miao <eric.y.miao@gmail.com>
M: Russell King <linux@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fbdd8533c05..6b86bb963a2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1009,7 +1009,6 @@ config ARCH_VT8500
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
select ARCH_REQUIRE_GPIOLIB
- select HAVE_PWM
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9f1921634eb..405d1673904 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -123,6 +123,12 @@
status = "disabled";
};
+ pwm {
+ compatible = "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
+
i2c@7000c000 {
compatible = "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index da740191771..3e4334d14ef 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -117,6 +117,12 @@
status = "disabled";
};
+ pwm {
+ compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ };
+
i2c@7000c000 {
compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
reg = <0x7000c000 0x100>;
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index d0de9c1192f..c0999633a9a 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -64,7 +64,8 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
&tegra_ehci2_pdata),
OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
&tegra_ehci3_pdata),
- OF_DEV_AUXDATA("nvidia,tegra20-apbdma", 0x6000a000, "tegra-apbdma", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL),
{}
};
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index ee48214bfd8..53bf60f1158 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -33,6 +33,8 @@
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+#include <mach/iomap.h>
+
#include "board.h"
#include "clock.h"
@@ -48,6 +50,7 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL),
OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL),
{}
};
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index 54e69973f39..7ce51767c99 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -5,5 +5,3 @@ obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
obj-$(CONFIG_MACH_BV07) += bv07.o
obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
-
-obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/arm/mach-vt8500/pwm.c b/arch/arm/mach-vt8500/pwm.c
deleted file mode 100644
index 8ad825e9359..00000000000
--- a/arch/arm/mach-vt8500/pwm.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-vt8500/pwm.c
- *
- * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-#include <linux/delay.h>
-
-#include <asm/div64.h>
-
-#define VT8500_NR_PWMS 4
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device {
- struct list_head node;
- struct platform_device *pdev;
-
- const char *label;
-
- void __iomem *regbase;
-
- unsigned int use_count;
- unsigned int pwm_id;
-};
-
-#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
-static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
-{
- int loops = msecs_to_loops(10);
- while ((readb(reg) & bitmask) && --loops)
- cpu_relax();
-
- if (unlikely(!loops))
- pr_warning("Waiting for status bits 0x%x to clear timed out\n",
- bitmask);
-}
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long long c;
- unsigned long period_cycles, prescale, pv, dc;
-
- if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
- return -EINVAL;
-
- c = 25000000/2; /* wild guess --- need to implement clocks */
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- if (period_cycles < 1)
- period_cycles = 1;
- prescale = (period_cycles - 1) / 4096;
- pv = period_cycles / (prescale + 1) - 1;
- if (pv > 4095)
- pv = 4095;
-
- if (prescale > 1023)
- return -EINVAL;
-
- c = (unsigned long long)pv * duty_ns;
- do_div(c, period_ns);
- dc = c;
-
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
- writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
-
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
- writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
-
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
- writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
-
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
- writel(5, pwm->regbase + (pwm->pwm_id << 4));
- return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
- writel(0, pwm->regbase + (pwm->pwm_id << 4));
-}
-EXPORT_SYMBOL(pwm_disable);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, node) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count++;
- pwm->label = label;
- } else {
- pwm = ERR_PTR(-EBUSY);
- }
- } else {
- pwm = ERR_PTR(-ENOENT);
- }
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else {
- pr_warning("PWM device already freed\n");
- }
-
- mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->node, &pwm_list);
- mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
- struct pwm_device *pwms;
- struct resource *r;
- int ret = 0;
- int i;
-
- pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
- if (pwms == NULL) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- for (i = 0; i < VT8500_NR_PWMS; i++) {
- pwms[i].use_count = 0;
- pwms[i].pwm_id = i;
- pwms[i].pdev = pdev;
- }
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "no memory resource defined\n");
- ret = -ENODEV;
- goto err_free;
- }
-
- r = request_mem_region(r->start, resource_size(r), pdev->name);
- if (r == NULL) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- ret = -EBUSY;
- goto err_free;
- }
-
- pwms[0].regbase = ioremap(r->start, resource_size(r));
- if (pwms[0].regbase == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -ENODEV;
- goto err_free_mem;
- }
-
- for (i = 1; i < VT8500_NR_PWMS; i++)
- pwms[i].regbase = pwms[0].regbase;
-
- for (i = 0; i < VT8500_NR_PWMS; i++)
- __add_pwm(&pwms[i]);
-
- platform_set_drvdata(pdev, pwms);
- return 0;
-
-err_free_mem:
- release_mem_region(r->start, resource_size(r));
-err_free:
- kfree(pwms);
- return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
- struct pwm_device *pwms;
- struct resource *r;
- int i;
-
- pwms = platform_get_drvdata(pdev);
- if (pwms == NULL)
- return -ENODEV;
-
- mutex_lock(&pwm_lock);
-
- for (i = 0; i < VT8500_NR_PWMS; i++)
- list_del(&pwms[i].node);
- mutex_unlock(&pwm_lock);
-
- iounmap(pwms[0].regbase);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, resource_size(r));
-
- kfree(pwms);
- return 0;
-}
-
-static struct platform_driver pwm_driver = {
- .driver = {
- .name = "vt8500-pwm",
- .owner = THIS_MODULE,
- },
- .probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
- return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index c722f9ce691..baf9064c084 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -47,12 +47,6 @@ config MXC_TZIC
config MXC_AVIC
bool
-config MXC_PWM
- tristate "Enable PWM driver"
- select HAVE_PWM
- help
- Enable support for the i.MX PWM controller(s).
-
config MXC_DEBUG_BOARD
bool "Enable MXC debug board(for 3-stack)"
help
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 63b064b5c1d..6ac72003115 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_MXC_AVIC) += avic.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
-obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index f302d048392..af8e484001e 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -8,5 +8,4 @@ obj-$(CONFIG_PXA3xx) += mfp.o
obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
-obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_PXA_SSP) += ssp.o
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
deleted file mode 100644
index ef32686feef..00000000000
--- a/arch/arm/plat-pxa/pwm.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pwm.c
- *
- * simple driver for PWM (Pulse Width Modulator) controller
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2008-02-13 initial version
- * eric miao <eric.miao@marvell.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <asm/div64.h>
-
-#define HAS_SECONDARY_PWM 0x10
-#define PWM_ID_BASE(d) ((d) & 0xf)
-
-static const struct platform_device_id pwm_id_table[] = {
- /* PWM has_secondary_pwm? */
- { "pxa25x-pwm", 0 },
- { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
- { "pxa168-pwm", 1 },
- { "pxa910-pwm", 1 },
- { },
-};
-MODULE_DEVICE_TABLE(platform, pwm_id_table);
-
-/* PWM registers and bits definitions */
-#define PWMCR (0x00)
-#define PWMDCR (0x04)
-#define PWMPCR (0x08)
-
-#define PWMCR_SD (1 << 6)
-#define PWMDCR_FD (1 << 10)
-
-struct pwm_device {
- struct list_head node;
- struct pwm_device *secondary;
- struct platform_device *pdev;
-
- const char *label;
- struct clk *clk;
- int clk_enabled;
- void __iomem *mmio_base;
-
- unsigned int use_count;
- unsigned int pwm_id;
-};
-
-/*
- * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
- * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
- */
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long long c;
- unsigned long period_cycles, prescale, pv, dc;
-
- if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
- return -EINVAL;
-
- c = clk_get_rate(pwm->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- if (period_cycles < 1)
- period_cycles = 1;
- prescale = (period_cycles - 1) / 1024;
- pv = period_cycles / (prescale + 1) - 1;
-
- if (prescale > 63)
- return -EINVAL;
-
- if (duty_ns == period_ns)
- dc = PWMDCR_FD;
- else
- dc = (pv + 1) * duty_ns / period_ns;
-
- /* NOTE: the clock to PWM has to be enabled first
- * before writing to the registers
- */
- clk_enable(pwm->clk);
- __raw_writel(prescale, pwm->mmio_base + PWMCR);
- __raw_writel(dc, pwm->mmio_base + PWMDCR);
- __raw_writel(pv, pwm->mmio_base + PWMPCR);
- clk_disable(pwm->clk);
-
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- int rc = 0;
-
- if (!pwm->clk_enabled) {
- rc = clk_enable(pwm->clk);
- if (!rc)
- pwm->clk_enabled = 1;
- }
- return rc;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- if (pwm->clk_enabled) {
- clk_disable(pwm->clk);
- pwm->clk_enabled = 0;
- }
-}
-EXPORT_SYMBOL(pwm_disable);
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, node) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count++;
- pwm->label = label;
- } else
- pwm = ERR_PTR(-EBUSY);
- } else
- pwm = ERR_PTR(-ENOENT);
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else
- pr_warning("PWM device already freed\n");
-
- mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
-
-static inline void __add_pwm(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->node, &pwm_list);
- mutex_unlock(&pwm_lock);
-}
-
-static int __devinit pwm_probe(struct platform_device *pdev)
-{
- const struct platform_device_id *id = platform_get_device_id(pdev);
- struct pwm_device *pwm, *secondary = NULL;
- struct resource *r;
- int ret = 0;
-
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
- dev_err(&pdev->dev, "failed to allocate memory\n");
- return -ENOMEM;
- }
-
- pwm->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(pwm->clk)) {
- ret = PTR_ERR(pwm->clk);
- goto err_free;
- }
- pwm->clk_enabled = 0;
-
- pwm->use_count = 0;
- pwm->pwm_id = PWM_ID_BASE(id->driver_data) + pdev->id;
- pwm->pdev = pdev;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- dev_err(&pdev->dev, "no memory resource defined\n");
- ret = -ENODEV;
- goto err_free_clk;
- }
-
- r = request_mem_region(r->start, resource_size(r), pdev->name);
- if (r == NULL) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- ret = -EBUSY;
- goto err_free_clk;
- }
-
- pwm->mmio_base = ioremap(r->start, resource_size(r));
- if (pwm->mmio_base == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -ENODEV;
- goto err_free_mem;
- }
-
- if (id->driver_data & HAS_SECONDARY_PWM) {
- secondary = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (secondary == NULL) {
- ret = -ENOMEM;
- goto err_free_mem;
- }
-
- *secondary = *pwm;
- pwm->secondary = secondary;
-
- /* registers for the second PWM has offset of 0x10 */
- secondary->mmio_base = pwm->mmio_base + 0x10;
- secondary->pwm_id = pdev->id + 2;
- }
-
- __add_pwm(pwm);
- if (secondary)
- __add_pwm(secondary);
-
- platform_set_drvdata(pdev, pwm);
- return 0;
-
-err_free_mem:
- release_mem_region(r->start, resource_size(r));
-err_free_clk:
- clk_put(pwm->clk);
-err_free:
- kfree(pwm);
- return ret;
-}
-
-static int __devexit pwm_remove(struct platform_device *pdev)
-{
- struct pwm_device *pwm;
- struct resource *r;
-
- pwm = platform_get_drvdata(pdev);
- if (pwm == NULL)
- return -ENODEV;
-
- mutex_lock(&pwm_lock);
-
- if (pwm->secondary) {
- list_del(&pwm->secondary->node);
- kfree(pwm->secondary);
- }
-
- list_del(&pwm->node);
- mutex_unlock(&pwm_lock);
-
- iounmap(pwm->mmio_base);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, resource_size(r));
-
- clk_put(pwm->clk);
- kfree(pwm);
- return 0;
-}
-
-static struct platform_driver pwm_driver = {
- .driver = {
- .name = "pxa25x-pwm",
- .owner = THIS_MODULE,
- },
- .probe = pwm_probe,
- .remove = __devexit_p(pwm_remove),
- .id_table = pwm_id_table,
-};
-
-static int __init pwm_init(void)
-{
- return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index b7871749667..9e40e8d0074 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -59,7 +59,3 @@ obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
obj-$(CONFIG_S5P_PM) += s5p-pm.o s5p-irq-pm.o
obj-$(CONFIG_S5P_SLEEP) += s5p-sleep.o
-
-# PWM support
-
-obj-$(CONFIG_HAVE_PWM) += pwm.o
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 9b765107e15..ec44fc6c34c 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1002,16 +1002,6 @@ config BFIN_GPTIMERS
To compile this driver as a module, choose M here: the module
will be called gptimers.
-config HAVE_PWM
- tristate "Enable PWM API support"
- depends on BFIN_GPTIMERS
- help
- Enable support for the Pulse Width Modulation framework (as
- found in linux/pwm.h).
-
- To compile this driver as a module, choose M here: the module
- will be called pwm.
-
choice
prompt "Uncached DMA region"
default DMA_UNCACHED_1M
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 08e6625106b..735f24e0742 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_FUNCTION_TRACER) += ftrace-entry.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
CFLAGS_REMOVE_ftrace.o = -pg
-obj-$(CONFIG_HAVE_PWM) += pwm.o
obj-$(CONFIG_IPIPE) += ipipe.o
obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
diff --git a/arch/blackfin/kernel/pwm.c b/arch/blackfin/kernel/pwm.c
deleted file mode 100644
index 33f5942733b..00000000000
--- a/arch/blackfin/kernel/pwm.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Blackfin Pulse Width Modulation (PWM) core
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/pwm.h>
-#include <linux/slab.h>
-
-#include <asm/gptimers.h>
-#include <asm/portmux.h>
-
-struct pwm_device {
- unsigned id;
- unsigned short pin;
-};
-
-static const unsigned short pwm_to_gptimer_per[] = {
- P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5,
- P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11,
-};
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int ret;
-
- /* XXX: pwm_id really should be unsigned */
- if (pwm_id < 0)
- return NULL;
-
- pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
- if (!pwm)
- return pwm;
-
- pwm->id = pwm_id;
- if (pwm->id >= ARRAY_SIZE(pwm_to_gptimer_per))
- goto err;
-
- pwm->pin = pwm_to_gptimer_per[pwm->id];
- ret = peripheral_request(pwm->pin, label);
- if (ret)
- goto err;
-
- return pwm;
- err:
- kfree(pwm);
- return NULL;
-}
-EXPORT_SYMBOL(pwm_request);
-
-void pwm_free(struct pwm_device *pwm)
-{
- peripheral_free(pwm->pin);
- kfree(pwm);
-}
-EXPORT_SYMBOL(pwm_free);
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
- unsigned long period, duty;
- unsigned long long val;
-
- if (duty_ns < 0 || duty_ns > period_ns)
- return -EINVAL;
-
- val = (unsigned long long)get_sclk() * period_ns;
- do_div(val, NSEC_PER_SEC);
- period = val;
-
- val = (unsigned long long)period * duty_ns;
- do_div(val, period_ns);
- duty = period - val;
-
- if (duty >= period)
- duty = period - 1;
-
- set_gptimer_config(pwm->id, TIMER_MODE_PWM | TIMER_PERIOD_CNT);
- set_gptimer_pwidth(pwm->id, duty);
- set_gptimer_period(pwm->id, period);
-
- return 0;
-}
-EXPORT_SYMBOL(pwm_config);
-
-int pwm_enable(struct pwm_device *pwm)
-{
- enable_gptimer(pwm->id);
- return 0;
-}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
- disable_gptimer(pwm->id);
-}
-EXPORT_SYMBOL(pwm_disable);
diff --git a/drivers/Kconfig b/drivers/Kconfig
index bfc918633fd..805c432c943 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -148,4 +148,6 @@ source "drivers/iio/Kconfig"
source "drivers/vme/Kconfig"
+source "drivers/pwm/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 2ba29ffef2c..bd36f09f224 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -8,6 +8,7 @@
# GPIO must come after pinctrl as gpios may need to mux pins etc
obj-y += pinctrl/
obj-y += gpio/
+obj-y += pwm/
obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-$(CONFIG_RAPIDIO) += rapidio/
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 92144ed1ad4..4fdc04ef37c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -276,6 +276,7 @@ config TWL6030_PWM
tristate "TWL6030 PWM (Pulse Width Modulator) Support"
depends on TWL4030_CORE
select HAVE_PWM
+ depends on !PWM
default n
help
Say yes here if you want support for TWL6030 PWM.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 154f3ef0763..98a442da892 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -64,6 +64,7 @@ config AB8500_PWM
bool "AB8500 PWM support"
depends on AB8500_CORE && ARCH_U8500
select HAVE_PWM
+ depends on !PWM
help
This driver exports functions to enable/disble/config/free Pulse
Width Modulation in the Analog Baseband Chip AB8500.
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
new file mode 100644
index 00000000000..8fc3808d7a3
--- /dev/null
+++ b/drivers/pwm/Kconfig
@@ -0,0 +1,108 @@
+menuconfig PWM
+ bool "PWM Support"
+ depends on !MACH_JZ4740 && !PUV3_PWM
+ help
+ This enables PWM support through the generic PWM framework.
+ You only need to enable this, if you also want to enable
+ one or more of the PWM drivers below.
+
+ If unsure, say N.
+
+if PWM
+
+config PWM_BFIN
+ tristate "Blackfin PWM support"
+ depends on BFIN_GPTIMERS
+ help
+ Generic PWM framework driver for Blackfin.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-bfin.
+
+config PWM_IMX
+ tristate "i.MX pwm support"
+ depends on ARCH_MXC
+ help
+ Generic PWM framework driver for i.MX.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-imx.
+
+config PWM_LPC32XX
+ tristate "LPC32XX PWM support"
+ depends on ARCH_LPC32XX
+ help
+ Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
+ PWM controllers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-lpc32xx.
+
+config PWM_MXS
+ tristate "Freescale MXS PWM support"
+ depends on ARCH_MXS && OF
+ select STMP_DEVICE
+ help
+ Generic PWM framework driver for Freescale MXS.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-mxs.
+
+config PWM_PXA
+ tristate "PXA PWM support"
+ depends on ARCH_PXA
+ help
+ Generic PWM framework driver for PXA.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-pxa.
+
+config PWM_SAMSUNG
+ tristate "Samsung pwm support"
+ depends on PLAT_SAMSUNG
+ help
+ Generic PWM framework driver for Samsung.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-samsung.
+
+config PWM_TEGRA
+ tristate "NVIDIA Tegra PWM support"
+ depends on ARCH_TEGRA
+ help
+ Generic PWM framework driver for the PWFM controller found on NVIDIA
+ Tegra SoCs.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-tegra.
+
+config PWM_TIECAP
+ tristate "ECAP PWM support"
+ depends on SOC_AM33XX
+ help
+ PWM driver support for the ECAP APWM controller found on AM33XX
+ TI SOC
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-tiecap.
+
+config PWM_TIEHRPWM
+ tristate "EHRPWM PWM support"
+ depends on SOC_AM33XX
+ help
+ PWM driver support for the EHRPWM controller found on AM33XX
+ TI SOC
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-tiehrpwm.
+
+config PWM_VT8500
+ tristate "vt8500 pwm support"
+ depends on ARCH_VT8500
+ help
+ Generic PWM framework driver for vt8500.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-vt8500.
+
+endif
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
new file mode 100644
index 00000000000..e4b2c898964
--- /dev/null
+++ b/drivers/pwm/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_PWM) += core.o
+obj-$(CONFIG_PWM_BFIN) += pwm-bfin.o
+obj-$(CONFIG_PWM_IMX) += pwm-imx.o
+obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
+obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
+obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
+obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
+obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
+obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
+obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
+obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
new file mode 100644
index 00000000000..ecb76909e94
--- /dev/null
+++ b/drivers/pwm/core.c
@@ -0,0 +1,713 @@
+/*
+ * Generic pwmlib implementation
+ *
+ * Copyright (C) 2011 Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2011-2012 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/pwm.h>
+#include <linux/radix-tree.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define MAX_PWMS 1024
+
+static DEFINE_MUTEX(pwm_lookup_lock);
+static LIST_HEAD(pwm_lookup_list);
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_chips);
+static DECLARE_BITMAP(allocated_pwms, MAX_PWMS);
+static RADIX_TREE(pwm_tree, GFP_KERNEL);
+
+static struct pwm_device *pwm_to_device(unsigned int pwm)
+{
+ return radix_tree_lookup(&pwm_tree, pwm);
+}
+
+static int alloc_pwms(int pwm, unsigned int count)
+{
+ unsigned int from = 0;
+ unsigned int start;
+
+ if (pwm >= MAX_PWMS)
+ return -EINVAL;
+
+ if (pwm >= 0)
+ from = pwm;
+
+ start = bitmap_find_next_zero_area(allocated_pwms, MAX_PWMS, from,
+ count, 0);
+
+ if (pwm >= 0 && start != pwm)
+ return -EEXIST;
+
+ if (start + count > MAX_PWMS)
+ return -ENOSPC;
+
+ return start;
+}
+
+static void free_pwms(struct pwm_chip *chip)
+{
+ unsigned int i;
+
+ for (i = 0; i < chip->npwm; i++) {
+ struct pwm_device *pwm = &chip->pwms[i];
+ radix_tree_delete(&pwm_tree, pwm->pwm);
+ }
+
+ bitmap_clear(allocated_pwms, chip->base, chip->npwm);
+
+ kfree(chip->pwms);
+ chip->pwms = NULL;
+}
+
+static struct pwm_chip *pwmchip_find_by_name(const char *name)
+{
+ struct pwm_chip *chip;
+
+ if (!name)
+ return NULL;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(chip, &pwm_chips, list) {
+ const char *chip_name = dev_name(chip->dev);
+
+ if (chip_name && strcmp(chip_name, name) == 0) {
+ mutex_unlock(&pwm_lock);
+ return chip;
+ }
+ }
+
+ mutex_unlock(&pwm_lock);
+
+ return NULL;
+}
+
+static int pwm_device_request(struct pwm_device *pwm, const char *label)
+{
+ int err;
+
+ if (test_bit(PWMF_REQUESTED, &pwm->flags))
+ return -EBUSY;
+
+ if (!try_module_get(pwm->chip->ops->owner))
+ return -ENODEV;
+
+ if (pwm->chip->ops->request) {
+ err = pwm->chip->ops->request(pwm->chip, pwm);
+ if (err) {
+ module_put(pwm->chip->ops->owner);
+ return err;
+ }
+ }
+
+ set_bit(PWMF_REQUESTED, &pwm->flags);
+ pwm->label = label;
+
+ return 0;
+}
+
+static struct pwm_device *of_pwm_simple_xlate(struct pwm_chip *pc,
+ const struct of_phandle_args *args)
+{
+ struct pwm_device *pwm;
+
+ if (pc->of_pwm_n_cells < 2)
+ return ERR_PTR(-EINVAL);
+
+ if (args->args[0] >= pc->npwm)
+ return ERR_PTR(-EINVAL);
+
+ pwm = pwm_request_from_chip(pc, args->args[0], NULL);
+ if (IS_ERR(pwm))
+ return pwm;
+
+ pwm_set_period(pwm, args->args[1]);
+
+ return pwm;
+}
+
+void of_pwmchip_add(struct pwm_chip *chip)
+{
+ if (!chip->dev || !chip->dev->of_node)
+ return;
+
+ if (!chip->of_xlate) {
+ chip->of_xlate = of_pwm_simple_xlate;
+ chip->of_pwm_n_cells = 2;
+ }
+
+ of_node_get(chip->dev->of_node);
+}
+
+void of_pwmchip_remove(struct pwm_chip *chip)
+{
+ if (chip->dev && chip->dev->of_node)
+ of_node_put(chip->dev->of_node);
+}
+
+/**
+ * pwm_set_chip_data() - set private chip data for a PWM
+ * @pwm: PWM device
+ * @data: pointer to chip-specific data
+ */
+int pwm_set_chip_data(struct pwm_device *pwm, void *data)
+{
+ if (!pwm)
+ return -EINVAL;
+
+ pwm->chip_data = data;
+
+ return 0;
+}
+
+/**
+ * pwm_get_chip_data() - get private chip data for a PWM
+ * @pwm: PWM device
+ */
+void *pwm_get_chip_data(struct pwm_device *pwm)
+{
+ return pwm ? pwm->chip_data : NULL;
+}
+
+/**
+ * pwmchip_add() - register a new PWM chip
+ * @chip: the PWM chip to add
+ *
+ * Register a new PWM chip. If chip->base < 0 then a dynamically assigned base
+ * will be used.
+ */
+int pwmchip_add(struct pwm_chip *chip)
+{
+ struct pwm_device *pwm;
+ unsigned int i;
+ int ret;
+
+ if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
+ !chip->ops->enable || !chip->ops->disable)
+ return -EINVAL;
+
+ mutex_lock(&pwm_lock);
+
+ ret = alloc_pwms(chip->base, chip->npwm);
+ if (ret < 0)
+ goto out;
+
+ chip->pwms = kzalloc(chip->npwm * sizeof(*pwm), GFP_KERNEL);
+ if (!chip->pwms) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ chip->base = ret;
+
+ for (i = 0; i < chip->npwm; i++) {
+ pwm = &chip->pwms[i];
+
+ pwm->chip = chip;
+ pwm->pwm = chip->base + i;
+ pwm->hwpwm = i;
+
+ radix_tree_insert(&pwm_tree, pwm->pwm, pwm);
+ }
+
+ bitmap_set(allocated_pwms, chip->base, chip->npwm);
+
+ INIT_LIST_HEAD(&chip->list);
+ list_add(&chip->list, &pwm_chips);
+
+ ret = 0;
+
+ if (IS_ENABLED(CONFIG_OF))
+ of_pwmchip_add(chip);
+
+out:
+ mutex_unlock(&pwm_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pwmchip_add);
+
+/**
+ * pwmchip_remove() - remove a PWM chip
+ * @chip: the PWM chip to remove
+ *
+ * Removes a PWM chip. This function may return busy if the PWM chip provides
+ * a PWM device that is still requested.
+ */
+int pwmchip_remove(struct pwm_chip *chip)
+{
+ unsigned int i;
+ int ret = 0;
+
+ mutex_lock(&pwm_lock);
+
+ for (i = 0; i < chip->npwm; i++) {
+ struct pwm_device *pwm = &chip->pwms[i];
+
+ if (test_bit(PWMF_REQUESTED, &pwm->flags)) {
+ ret = -EBUSY;
+ goto out;
+ }
+ }
+
+ list_del_init(&chip->list);
+
+ if (IS_ENABLED(CONFIG_OF))
+ of_pwmchip_remove(chip);
+
+ free_pwms(chip);
+
+out:
+ mutex_unlock(&pwm_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pwmchip_remove);
+
+/**
+ * pwm_request() - request a PWM device
+ * @pwm_id: global PWM device index
+ * @label: PWM device label
+ *
+ * This function is deprecated, use pwm_get() instead.
+ */
+struct pwm_device *pwm_request(int pwm, const char *label)
+{
+ struct pwm_device *dev;
+ int err;
+
+ if (pwm < 0 || pwm >= MAX_PWMS)
+ return ERR_PTR(-EINVAL);
+
+ mutex_lock(&pwm_lock);
+
+ dev = pwm_to_device(pwm);
+ if (!dev) {
+ dev = ERR_PTR(-EPROBE_DEFER);
+ goto out;
+ }
+
+ err = pwm_device_request(dev, label);
+ if (err < 0)
+ dev = ERR_PTR(err);
+
+out:
+ mutex_unlock(&pwm_lock);
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(pwm_request);
+
+/**
+ * pwm_request_from_chip() - request a PWM device relative to a PWM chip
+ * @chip: PWM chip
+ * @index: per-chip index of the PWM to request
+ * @label: a literal description string of this PWM
+ *
+ * Returns the PWM at the given index of the given PWM chip. A negative error
+ * code is returned if the index is not valid for the specified PWM chip or
+ * if the PWM device cannot be requested.
+ */
+struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+ unsigned int index,
+ const char *label)
+{
+ struct pwm_device *pwm;
+ int err;
+
+ if (!chip || index >= chip->npwm)
+ return ERR_PTR(-EINVAL);
+
+ mutex_lock(&pwm_lock);
+ pwm = &chip->pwms[index];
+
+ err = pwm_device_request(pwm, label);
+ if (err < 0)
+ pwm = ERR_PTR(err);
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL_GPL(pwm_request_from_chip);
+
+/**
+ * pwm_free() - free a PWM device
+ * @pwm: PWM device
+ *
+ * This function is deprecated, use pwm_put() instead.
+ */
+void pwm_free(struct pwm_device *pwm)
+{
+ pwm_put(pwm);
+}
+EXPORT_SYMBOL_GPL(pwm_free);
+
+/**
+ * pwm_config() - change a PWM device configuration
+ * @pwm: PWM device
+ * @duty_ns: "on" time (in nanoseconds)
+ * @period_ns: duration (in nanoseconds) of one cycle
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ if (!pwm || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ return pwm->chip->ops->config(pwm->chip, pwm, duty_ns, period_ns);
+}
+EXPORT_SYMBOL_GPL(pwm_config);
+
+/**
+ * pwm_enable() - start a PWM output toggling
+ * @pwm: PWM device
+ */
+int pwm_enable(struct pwm_device *pwm)
+{
+ if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
+ return pwm->chip->ops->enable(pwm->chip, pwm);
+
+ return pwm ? 0 : -EINVAL;
+}
+EXPORT_SYMBOL_GPL(pwm_enable);
+
+/**
+ * pwm_disable() - stop a PWM output toggling
+ * @pwm: PWM device
+ */
+void pwm_disable(struct pwm_device *pwm)
+{
+ if (pwm && test_and_clear_bit(PWMF_ENABLED, &pwm->flags))
+ pwm->chip->ops->disable(pwm->chip, pwm);
+}
+EXPORT_SYMBOL_GPL(pwm_disable);
+
+static struct pwm_chip *of_node_to_pwmchip(struct device_node *np)
+{
+ struct pwm_chip *chip;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(chip, &pwm_chips, list)
+ if (chip->dev && chip->dev->of_node == np) {
+ mutex_unlock(&pwm_lock);
+ return chip;
+ }
+
+ mutex_unlock(&pwm_lock);
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+
+/**
+ * of_pwm_request() - request a PWM via the PWM framework
+ * @np: device node to get the PWM from
+ * @con_id: consumer name
+ *
+ * Returns the PWM device parsed from the phandle and index specified in the
+ * "pwms" property of a device tree node or a negative error-code on failure.
+ * Values parsed from the device tree are stored in the returned PWM device
+ * object.
+ *
+ * If con_id is NULL, the first PWM device listed in the "pwms" property will
+ * be requested. Otherwise the "pwm-names" property is used to do a reverse
+ * lookup of the PWM index. This also means that the "pwm-names" property
+ * becomes mandatory for devices that look up the PWM device via the con_id
+ * parameter.
+ */
+static struct pwm_device *of_pwm_request(struct device_node *np,
+ const char *con_id)
+{
+ struct pwm_device *pwm = NULL;
+ struct of_phandle_args args;
+ struct pwm_chip *pc;
+ int index = 0;
+ int err;
+
+ if (con_id) {
+ index = of_property_match_string(np, "pwm-names", con_id);
+ if (index < 0)
+ return ERR_PTR(index);
+ }
+
+ err = of_parse_phandle_with_args(np, "pwms", "#pwm-cells", index,
+ &args);
+ if (err) {
+ pr_debug("%s(): can't parse \"pwms\" property\n", __func__);
+ return ERR_PTR(err);
+ }
+
+ pc = of_node_to_pwmchip(args.np);
+ if (IS_ERR(pc)) {
+ pr_debug("%s(): PWM chip not found\n", __func__);
+ pwm = ERR_CAST(pc);
+ goto put;
+ }
+
+ if (args.args_count != pc->of_pwm_n_cells) {
+ pr_debug("%s: wrong #pwm-cells for %s\n", np->full_name,
+ args.np->full_name);
+ pwm = ERR_PTR(-EINVAL);
+ goto put;
+ }
+
+ pwm = pc->of_xlate(pc, &args);
+ if (IS_ERR(pwm))
+ goto put;
+
+ /*
+ * If a consumer name was not given, try to look it up from the
+ * "pwm-names" property if it exists. Otherwise use the name of
+ * the user device node.
+ */
+ if (!con_id) {
+ err = of_property_read_string_index(np, "pwm-names", index,
+ &con_id);
+ if (err < 0)
+ con_id = np->name;
+ }
+
+ pwm->label = con_id;
+
+put:
+ of_node_put(args.np);
+
+ return pwm;
+}
+
+/**
+ * pwm_add_table() - register PWM device consumers
+ * @table: array of consumers to register
+ * @num: number of consumers in table
+ */
+void __init pwm_add_table(struct pwm_lookup *table, size_t num)
+{
+ mutex_lock(&pwm_lookup_lock);
+
+ while (num--) {
+ list_add_tail(&table->list, &pwm_lookup_list);
+ table++;
+ }
+
+ mutex_unlock(&pwm_lookup_lock);
+}
+
+/**
+ * pwm_get() - look up and request a PWM device
+ * @dev: device for PWM consumer
+ * @con_id: consumer name
+ *
+ * Lookup is first attempted using DT. If the device was not instantiated from
+ * a device tree, a PWM chip and a relative index is looked up via a table
+ * supplied by board setup code (see pwm_add_table()).
+ *
+ * Once a PWM chip has been found the specified PWM device will be requested
+ * and is ready to be used.
+ */
+struct pwm_device *pwm_get(struct device *dev, const char *con_id)
+{
+ struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
+ const char *dev_id = dev ? dev_name(dev): NULL;
+ struct pwm_chip *chip = NULL;
+ unsigned int index = 0;
+ unsigned int best = 0;
+ struct pwm_lookup *p;
+ unsigned int match;
+
+ /* look up via DT first */
+ if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
+ return of_pwm_request(dev->of_node, con_id);
+
+ /*
+ * We look up the provider in the static table typically provided by
+ * board setup code. We first try to lookup the consumer device by
+ * name. If the consumer device was passed in as NULL or if no match
+ * was found, we try to find the consumer by directly looking it up
+ * by name.
+ *
+ * If a match is found, the provider PWM chip is looked up by name
+ * and a PWM device is requested using the PWM device per-chip index.
+ *
+ * The lookup algorithm was shamelessly taken from the clock
+ * framework:
+ *
+ * We do slightly fuzzy matching here:
+ * An entry with a NULL ID is assumed to be a wildcard.
+ * If an entry has a device ID, it must match
+ * If an entry has a connection ID, it must match
+ * Then we take the most specific entry - with the following order
+ * of precedence: dev+con > dev only > con only.
+ */
+ mutex_lock(&pwm_lookup_lock);
+
+ list_for_each_entry(p, &pwm_lookup_list, list) {
+ match = 0;
+
+ if (p->dev_id) {
+ if (!dev_id || strcmp(p->dev_id, dev_id))
+ continue;
+
+ match += 2;
+ }
+
+ if (p->con_id) {
+ if (!con_id || strcmp(p->con_id, con_id))
+ continue;
+
+ match += 1;
+ }
+
+ if (match > best) {
+ chip = pwmchip_find_by_name(p->provider);
+ index = p->index;
+
+ if (match != 3)
+ best = match;
+ else
+ break;
+ }
+ }
+
+ if (chip)
+ pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id);
+
+ mutex_unlock(&pwm_lookup_lock);
+
+ return pwm;
+}
+EXPORT_SYMBOL_GPL(pwm_get);
+
+/**
+ * pwm_put() - release a PWM device
+ * @pwm: PWM device
+ */
+void pwm_put(struct pwm_device *pwm)
+{
+ if (!pwm)
+ return;
+
+ mutex_lock(&pwm_lock);
+
+ if (!test_and_clear_bit(PWMF_REQUESTED, &pwm->flags)) {
+ pr_warning("PWM device already freed\n");
+ goto out;
+ }
+
+ if (pwm->chip->ops->free)
+ pwm->chip->ops->free(pwm->chip, pwm);
+
+ pwm->label = NULL;
+
+ module_put(pwm->chip->ops->owner);
+out:
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL_GPL(pwm_put);
+
+#ifdef CONFIG_DEBUG_FS
+static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s)
+{
+ unsigned int i;
+
+ for (i = 0; i < chip->npwm; i++) {
+ struct pwm_device *pwm = &chip->pwms[i];
+
+ seq_printf(s, " pwm-%-3d (%-20.20s):", i, pwm->label);
+
+ if (test_bit(PWMF_REQUESTED, &pwm->flags))
+ seq_printf(s, " requested");
+
+ if (test_bit(PWMF_ENABLED, &pwm->flags))
+ seq_printf(s, " enabled");
+
+ seq_printf(s, "\n");
+ }
+}
+
+static void *pwm_seq_start(struct seq_file *s, loff_t *pos)
+{
+ mutex_lock(&pwm_lock);
+ s->private = "";
+
+ return seq_list_start(&pwm_chips, *pos);
+}
+
+static void *pwm_seq_next(struct seq_file *s, void *v, loff_t *pos)
+{
+ s->private = "\n";
+
+ return seq_list_next(v, &pwm_chips, pos);
+}
+
+static void pwm_seq_stop(struct seq_file *s, void *v)
+{
+ mutex_unlock(&pwm_lock);
+}
+
+static int pwm_seq_show(struct seq_file *s, void *v)
+{
+ struct pwm_chip *chip = list_entry(v, struct pwm_chip, list);
+
+ seq_printf(s, "%s%s/%s, %d PWM device%s\n", (char *)s->private,
+ chip->dev->bus ? chip->dev->bus->name : "no-bus",
+ dev_name(chip->dev), chip->npwm,
+ (chip->npwm != 1) ? "s" : "");
+
+ if (chip->ops->dbg_show)
+ chip->ops->dbg_show(chip, s);
+ else
+ pwm_dbg_show(chip, s);
+
+ return 0;
+}
+
+static const struct seq_operations pwm_seq_ops = {
+ .start = pwm_seq_start,
+ .next = pwm_seq_next,
+ .stop = pwm_seq_stop,
+ .show = pwm_seq_show,
+};
+
+static int pwm_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &pwm_seq_ops);
+}
+
+static const struct file_operations pwm_debugfs_ops = {
+ .owner = THIS_MODULE,
+ .open = pwm_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+static int __init pwm_debugfs_init(void)
+{
+ debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL,
+ &pwm_debugfs_ops);
+
+ return 0;
+}
+
+subsys_initcall(pwm_debugfs_init);
+#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/pwm/pwm-bfin.c b/drivers/pwm/pwm-bfin.c
new file mode 100644
index 00000000000..d53c4e7941e
--- /dev/null
+++ b/drivers/pwm/pwm-bfin.c
@@ -0,0 +1,162 @@
+/*
+ * Blackfin Pulse Width Modulation (PWM) core
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+#include <asm/gptimers.h>
+#include <asm/portmux.h>
+
+struct bfin_pwm_chip {
+ struct pwm_chip chip;
+};
+
+struct bfin_pwm {
+ unsigned short pin;
+};
+
+static const unsigned short pwm_to_gptimer_per[] = {
+ P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR4, P_TMR5,
+ P_TMR6, P_TMR7, P_TMR8, P_TMR9, P_TMR10, P_TMR11,
+};
+
+static int bfin_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bfin_pwm *priv;
+ int ret;
+
+ if (pwm->hwpwm >= ARRAY_SIZE(pwm_to_gptimer_per))
+ return -EINVAL;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pin = pwm_to_gptimer_per[pwm->hwpwm];
+
+ ret = peripheral_request(priv->pin, NULL);
+ if (ret) {
+ kfree(priv);
+ return ret;
+ }
+
+ pwm_set_chip_data(pwm, priv);
+
+ return 0;
+}
+
+static void bfin_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+
+ if (priv) {
+ peripheral_free(priv->pin);
+ kfree(priv);
+ }
+}
+
+static int bfin_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+ unsigned long period, duty;
+ unsigned long long val;
+
+ if (duty_ns < 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ val = (unsigned long long)get_sclk() * period_ns;
+ do_div(val, NSEC_PER_SEC);
+ period = val;
+
+ val = (unsigned long long)period * duty_ns;
+ do_div(val, period_ns);
+ duty = period - val;
+
+ if (duty >= period)
+ duty = period - 1;
+
+ set_gptimer_config(priv->pin, TIMER_MODE_PWM | TIMER_PERIOD_CNT);
+ set_gptimer_pwidth(priv->pin, duty);
+ set_gptimer_period(priv->pin, period);
+
+ return 0;
+}
+
+static int bfin_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+
+ enable_gptimer(priv->pin);
+
+ return 0;
+}
+
+static void bfin_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct bfin_pwm *priv = pwm_get_chip_data(pwm);
+
+ disable_gptimer(priv->pin);
+}
+
+static struct pwm_ops bfin_pwm_ops = {
+ .request = bfin_pwm_request,
+ .free = bfin_pwm_free,
+ .config = bfin_pwm_config,
+ .enable = bfin_pwm_enable,
+ .disable = bfin_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int bfin_pwm_probe(struct platform_device *pdev)
+{
+ struct bfin_pwm_chip *pwm;
+ int ret;
+
+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+ if (!pwm) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, pwm);
+
+ pwm->chip.dev = &pdev->dev;
+ pwm->chip.ops = &bfin_pwm_ops;
+ pwm->chip.base = -1;
+ pwm->chip.npwm = 12;
+
+ ret = pwmchip_add(&pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit bfin_pwm_remove(struct platform_device *pdev)
+{
+ struct bfin_pwm_chip *pwm = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&pwm->chip);
+}
+
+static struct platform_driver bfin_pwm_driver = {
+ .driver = {
+ .name = "bfin-pwm",
+ },
+ .probe = bfin_pwm_probe,
+ .remove = __devexit_p(bfin_pwm_remove),
+};
+
+module_platform_driver(bfin_pwm_driver);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-mxc/pwm.c b/drivers/pwm/pwm-imx.c
index c0cab2270dd..2a0b3533397 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/drivers/pwm/pwm-imx.c
@@ -39,33 +39,28 @@
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
-
-
-struct pwm_device {
- struct list_head node;
- struct platform_device *pdev;
-
- const char *label;
+struct imx_chip {
struct clk *clk;
int clk_enabled;
void __iomem *mmio_base;
- unsigned int use_count;
- unsigned int pwm_id;
+ struct pwm_chip chip;
};
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip)
+
+static int imx_pwm_config(struct pwm_chip *chip,
+ struct pwm_device *pwm, int duty_ns, int period_ns)
{
- if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
- return -EINVAL;
+ struct imx_chip *imx = to_imx_chip(chip);
if (!(cpu_is_mx1() || cpu_is_mx21())) {
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
u32 cr;
- c = clk_get_rate(pwm->clk);
+ c = clk_get_rate(imx->clk);
c = c * period_ns;
do_div(c, 1000000000);
period_cycles = c;
@@ -86,8 +81,8 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
else
period_cycles = 0;
- writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
- writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+ writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, imx->mmio_base + MX3_PWMPR);
cr = MX3_PWMCR_PRESCALER(prescale) |
MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
@@ -98,7 +93,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
else
cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
- writel(cr, pwm->mmio_base + MX3_PWMCR);
+ writel(cr, imx->mmio_base + MX3_PWMCR);
} else if (cpu_is_mx1() || cpu_is_mx21()) {
/* The PWM subsystem allows for exact frequencies. However,
* I cannot connect a scope on my device to the PWM line and
@@ -116,191 +111,120 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
* both the prescaler (/1 .. /128) and then by CLKSEL
* (/2 .. /16).
*/
- u32 max = readl(pwm->mmio_base + MX1_PWMP);
+ u32 max = readl(imx->mmio_base + MX1_PWMP);
u32 p = max * duty_ns / period_ns;
- writel(max - p, pwm->mmio_base + MX1_PWMS);
+ writel(max - p, imx->mmio_base + MX1_PWMS);
} else {
BUG();
}
return 0;
}
-EXPORT_SYMBOL(pwm_config);
-int pwm_enable(struct pwm_device *pwm)
+static int imx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct imx_chip *imx = to_imx_chip(chip);
int rc = 0;
- if (!pwm->clk_enabled) {
- rc = clk_prepare_enable(pwm->clk);
+ if (!imx->clk_enabled) {
+ rc = clk_prepare_enable(imx->clk);
if (!rc)
- pwm->clk_enabled = 1;
+ imx->clk_enabled = 1;
}
return rc;
}
-EXPORT_SYMBOL(pwm_enable);
-void pwm_disable(struct pwm_device *pwm)
+static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- writel(0, pwm->mmio_base + MX3_PWMCR);
+ struct imx_chip *imx = to_imx_chip(chip);
- if (pwm->clk_enabled) {
- clk_disable_unprepare(pwm->clk);
- pwm->clk_enabled = 0;
- }
-}
-EXPORT_SYMBOL(pwm_disable);
+ writel(0, imx->mmio_base + MX3_PWMCR);
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, node) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
+ if (imx->clk_enabled) {
+ clk_disable_unprepare(imx->clk);
+ imx->clk_enabled = 0;
}
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count++;
- pwm->label = label;
- } else
- pwm = ERR_PTR(-EBUSY);
- } else
- pwm = ERR_PTR(-ENOENT);
-
- mutex_unlock(&pwm_lock);
- return pwm;
}
-EXPORT_SYMBOL(pwm_request);
-void pwm_free(struct pwm_device *pwm)
-{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else
- pr_warning("PWM device already freed\n");
-
- mutex_unlock(&pwm_lock);
-}
-EXPORT_SYMBOL(pwm_free);
+static struct pwm_ops imx_pwm_ops = {
+ .enable = imx_pwm_enable,
+ .disable = imx_pwm_disable,
+ .config = imx_pwm_config,
+ .owner = THIS_MODULE,
+};
-static int __devinit mxc_pwm_probe(struct platform_device *pdev)
+static int __devinit imx_pwm_probe(struct platform_device *pdev)
{
- struct pwm_device *pwm;
+ struct imx_chip *imx;
struct resource *r;
int ret = 0;
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
+ imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
+ if (imx == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
return -ENOMEM;
}
- pwm->clk = clk_get(&pdev->dev, "pwm");
+ imx->clk = devm_clk_get(&pdev->dev, "pwm");
- if (IS_ERR(pwm->clk)) {
- ret = PTR_ERR(pwm->clk);
- goto err_free;
- }
+ if (IS_ERR(imx->clk))
+ return PTR_ERR(imx->clk);
- pwm->clk_enabled = 0;
+ imx->chip.ops = &imx_pwm_ops;
+ imx->chip.dev = &pdev->dev;
+ imx->chip.base = -1;
+ imx->chip.npwm = 1;
- pwm->use_count = 0;
- pwm->pwm_id = pdev->id;
- pwm->pdev = pdev;
+ imx->clk_enabled = 0;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
- ret = -ENODEV;
- goto err_free_clk;
- }
-
- r = request_mem_region(r->start, resource_size(r), pdev->name);
- if (r == NULL) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- ret = -EBUSY;
- goto err_free_clk;
+ return -ENODEV;
}
- pwm->mmio_base = ioremap(r->start, resource_size(r));
- if (pwm->mmio_base == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -ENODEV;
- goto err_free_mem;
- }
+ imx->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (imx->mmio_base == NULL)
+ return -EADDRNOTAVAIL;
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->node, &pwm_list);
- mutex_unlock(&pwm_lock);
+ ret = pwmchip_add(&imx->chip);
+ if (ret < 0)
+ return ret;
- platform_set_drvdata(pdev, pwm);
+ platform_set_drvdata(pdev, imx);
return 0;
-
-err_free_mem:
- release_mem_region(r->start, resource_size(r));
-err_free_clk:
- clk_put(pwm->clk);
-err_free:
- kfree(pwm);
- return ret;
}
-static int __devexit mxc_pwm_remove(struct platform_device *pdev)
+static int __devexit imx_pwm_remove(struct platform_device *pdev)
{
- struct pwm_device *pwm;
- struct resource *r;
+ struct imx_chip *imx;
- pwm = platform_get_drvdata(pdev);
- if (pwm == NULL)
+ imx = platform_get_drvdata(pdev);
+ if (imx == NULL)
return -ENODEV;
- mutex_lock(&pwm_lock);
- list_del(&pwm->node);
- mutex_unlock(&pwm_lock);
-
- iounmap(pwm->mmio_base);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, resource_size(r));
-
- clk_put(pwm->clk);
-
- kfree(pwm);
- return 0;
+ return pwmchip_remove(&imx->chip);
}
-static struct platform_driver mxc_pwm_driver = {
+static struct platform_driver imx_pwm_driver = {
.driver = {
.name = "mxc_pwm",
},
- .probe = mxc_pwm_probe,
- .remove = __devexit_p(mxc_pwm_remove),
+ .probe = imx_pwm_probe,
+ .remove = __devexit_p(imx_pwm_remove),
};
-static int __init mxc_pwm_init(void)
+static int __init imx_pwm_init(void)
{
- return platform_driver_register(&mxc_pwm_driver);
+ return platform_driver_register(&imx_pwm_driver);
}
-arch_initcall(mxc_pwm_init);
+arch_initcall(imx_pwm_init);
-static void __exit mxc_pwm_exit(void)
+static void __exit imx_pwm_exit(void)
{
- platform_driver_unregister(&mxc_pwm_driver);
+ platform_driver_unregister(&imx_pwm_driver);
}
-module_exit(mxc_pwm_exit);
+module_exit(imx_pwm_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
new file mode 100644
index 00000000000..adb87f0c163
--- /dev/null
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2012 Alexandre Pereira da Silva <aletes.xgr@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+
+struct lpc32xx_pwm_chip {
+ struct pwm_chip chip;
+ struct clk *clk;
+ void __iomem *base;
+};
+
+#define PWM_ENABLE (1 << 31)
+#define PWM_RELOADV(x) (((x) & 0xFF) << 8)
+#define PWM_DUTY(x) ((x) & 0xFF)
+
+#define to_lpc32xx_pwm_chip(_chip) \
+ container_of(_chip, struct lpc32xx_pwm_chip, chip)
+
+static int lpc32xx_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+ unsigned long long c;
+ int period_cycles, duty_cycles;
+
+ c = clk_get_rate(lpc32xx->clk) / 256;
+ c = c * period_ns;
+ do_div(c, NSEC_PER_SEC);
+
+ /* Handle high and low extremes */
+ if (c == 0)
+ c = 1;
+ if (c > 255)
+ c = 0; /* 0 set division by 256 */
+ period_cycles = c;
+
+ c = 256 * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ writel(PWM_ENABLE | PWM_RELOADV(period_cycles) | PWM_DUTY(duty_cycles),
+ lpc32xx->base + (pwm->hwpwm << 2));
+
+ return 0;
+}
+
+static int lpc32xx_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+
+ return clk_enable(lpc32xx->clk);
+}
+
+static void lpc32xx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct lpc32xx_pwm_chip *lpc32xx = to_lpc32xx_pwm_chip(chip);
+
+ writel(0, lpc32xx->base + (pwm->hwpwm << 2));
+ clk_disable(lpc32xx->clk);
+}
+
+static const struct pwm_ops lpc32xx_pwm_ops = {
+ .config = lpc32xx_pwm_config,
+ .enable = lpc32xx_pwm_enable,
+ .disable = lpc32xx_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int lpc32xx_pwm_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_pwm_chip *lpc32xx;
+ struct resource *res;
+ int ret;
+
+ lpc32xx = devm_kzalloc(&pdev->dev, sizeof(*lpc32xx), GFP_KERNEL);
+ if (!lpc32xx)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ lpc32xx->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!lpc32xx->base)
+ return -EADDRNOTAVAIL;
+
+ lpc32xx->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(lpc32xx->clk))
+ return PTR_ERR(lpc32xx->clk);
+
+ lpc32xx->chip.dev = &pdev->dev;
+ lpc32xx->chip.ops = &lpc32xx_pwm_ops;
+ lpc32xx->chip.npwm = 2;
+
+ ret = pwmchip_add(&lpc32xx->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, lpc32xx);
+
+ return 0;
+}
+
+static int __devexit lpc32xx_pwm_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
+
+ clk_disable(lpc32xx->clk);
+ return pwmchip_remove(&lpc32xx->chip);
+}
+
+static struct of_device_id lpc32xx_pwm_dt_ids[] = {
+ { .compatible = "nxp,lpc3220-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_pwm_dt_ids);
+
+static struct platform_driver lpc32xx_pwm_driver = {
+ .driver = {
+ .name = "lpc32xx-pwm",
+ .of_match_table = of_match_ptr(lpc32xx_pwm_dt_ids),
+ },
+ .probe = lpc32xx_pwm_probe,
+ .remove = __devexit_p(lpc32xx_pwm_remove),
+};
+module_platform_driver(lpc32xx_pwm_driver);
+
+MODULE_ALIAS("platform:lpc32xx-pwm");
+MODULE_AUTHOR("Alexandre Pereira da Silva <aletes.xgr@gmail.com>");
+MODULE_DESCRIPTION("LPC32XX PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
new file mode 100644
index 00000000000..e5852646f08
--- /dev/null
+++ b/drivers/pwm/pwm-mxs.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/slab.h>
+#include <linux/stmp_device.h>
+
+#define SET 0x4
+#define CLR 0x8
+#define TOG 0xc
+
+#define PWM_CTRL 0x0
+#define PWM_ACTIVE0 0x10
+#define PWM_PERIOD0 0x20
+#define PERIOD_PERIOD(p) ((p) & 0xffff)
+#define PERIOD_PERIOD_MAX 0x10000
+#define PERIOD_ACTIVE_HIGH (3 << 16)
+#define PERIOD_INACTIVE_LOW (2 << 18)
+#define PERIOD_CDIV(div) (((div) & 0x7) << 20)
+#define PERIOD_CDIV_MAX 8
+
+struct mxs_pwm_chip {
+ struct pwm_chip chip;
+ struct device *dev;
+ struct clk *clk;
+ void __iomem *base;
+};
+
+#define to_mxs_pwm_chip(_chip) container_of(_chip, struct mxs_pwm_chip, chip)
+
+static int mxs_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+ int ret, div = 0;
+ unsigned int period_cycles, duty_cycles;
+ unsigned long rate;
+ unsigned long long c;
+
+ rate = clk_get_rate(mxs->clk);
+ while (1) {
+ c = rate / (1 << div);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ if (c < PERIOD_PERIOD_MAX)
+ break;
+ div++;
+ if (div > PERIOD_CDIV_MAX)
+ return -EINVAL;
+ }
+
+ period_cycles = c;
+ c *= duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ /*
+ * If the PWM channel is disabled, make sure to turn on the clock
+ * before writing the register. Otherwise, keep it enabled.
+ */
+ if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ ret = clk_prepare_enable(mxs->clk);
+ if (ret)
+ return ret;
+ }
+
+ writel(duty_cycles << 16,
+ mxs->base + PWM_ACTIVE0 + pwm->hwpwm * 0x20);
+ writel(PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH |
+ PERIOD_INACTIVE_LOW | PERIOD_CDIV(div),
+ mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
+
+ /*
+ * If the PWM is not enabled, turn the clock off again to save power.
+ */
+ if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ clk_disable_unprepare(mxs->clk);
+
+ return 0;
+}
+
+static int mxs_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+ int ret;
+
+ ret = clk_prepare_enable(mxs->clk);
+ if (ret)
+ return ret;
+
+ writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
+
+ return 0;
+}
+
+static void mxs_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct mxs_pwm_chip *mxs = to_mxs_pwm_chip(chip);
+
+ writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
+
+ clk_disable_unprepare(mxs->clk);
+}
+
+static const struct pwm_ops mxs_pwm_ops = {
+ .config = mxs_pwm_config,
+ .enable = mxs_pwm_enable,
+ .disable = mxs_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int mxs_pwm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct mxs_pwm_chip *mxs;
+ struct resource *res;
+ struct pinctrl *pinctrl;
+ int ret;
+
+ mxs = devm_kzalloc(&pdev->dev, sizeof(*mxs), GFP_KERNEL);
+ if (!mxs)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mxs->base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!mxs->base)
+ return -EADDRNOTAVAIL;
+
+ pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
+ if (IS_ERR(pinctrl))
+ return PTR_ERR(pinctrl);
+
+ mxs->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(mxs->clk))
+ return PTR_ERR(mxs->clk);
+
+ mxs->chip.dev = &pdev->dev;
+ mxs->chip.ops = &mxs_pwm_ops;
+ mxs->chip.base = -1;
+ ret = of_property_read_u32(np, "fsl,pwm-number", &mxs->chip.npwm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get pwm number: %d\n", ret);
+ return ret;
+ }
+
+ ret = pwmchip_add(&mxs->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
+ return ret;
+ }
+
+ mxs->dev = &pdev->dev;
+ platform_set_drvdata(pdev, mxs);
+
+ stmp_reset_block(mxs->base);
+
+ return 0;
+}
+
+static int __devexit mxs_pwm_remove(struct platform_device *pdev)
+{
+ struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);
+
+ return pwmchip_remove(&mxs->chip);
+}
+
+static struct of_device_id mxs_pwm_dt_ids[] = {
+ { .compatible = "fsl,imx23-pwm", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_pwm_dt_ids);
+
+static struct platform_driver mxs_pwm_driver = {
+ .driver = {
+ .name = "mxs-pwm",
+ .of_match_table = of_match_ptr(mxs_pwm_dt_ids),
+ },
+ .probe = mxs_pwm_probe,
+ .remove = __devexit_p(mxs_pwm_remove),
+};
+module_platform_driver(mxs_pwm_driver);
+
+MODULE_ALIAS("platform:mxs-pwm");
+MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
+MODULE_DESCRIPTION("Freescale MXS PWM Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
new file mode 100644
index 00000000000..bd5867a1c70
--- /dev/null
+++ b/drivers/pwm/pwm-pxa.c
@@ -0,0 +1,218 @@
+/*
+ * drivers/pwm/pwm-pxa.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13 initial version
+ * eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+
+#define HAS_SECONDARY_PWM 0x10
+#define PWM_ID_BASE(d) ((d) & 0xf)
+
+static const struct platform_device_id pwm_id_table[] = {
+ /* PWM has_secondary_pwm? */
+ { "pxa25x-pwm", 0 },
+ { "pxa27x-pwm", 0 | HAS_SECONDARY_PWM },
+ { "pxa168-pwm", 1 },
+ { "pxa910-pwm", 1 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, pwm_id_table);
+
+/* PWM registers and bits definitions */
+#define PWMCR (0x00)
+#define PWMDCR (0x04)
+#define PWMPCR (0x08)
+
+#define PWMCR_SD (1 << 6)
+#define PWMDCR_FD (1 << 10)
+
+struct pxa_pwm_chip {
+ struct pwm_chip chip;
+ struct device *dev;
+
+ struct clk *clk;
+ int clk_enabled;
+ void __iomem *mmio_base;
+};
+
+static inline struct pxa_pwm_chip *to_pxa_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct pxa_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+static int pxa_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+ unsigned long offset;
+ int rc;
+
+ if (period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ offset = pwm->hwpwm ? 0x10 : 0;
+
+ c = clk_get_rate(pc->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 1024;
+ pv = period_cycles / (prescale + 1) - 1;
+
+ if (prescale > 63)
+ return -EINVAL;
+
+ if (duty_ns == period_ns)
+ dc = PWMDCR_FD;
+ else
+ dc = (pv + 1) * duty_ns / period_ns;
+
+ /* NOTE: the clock to PWM has to be enabled first
+ * before writing to the registers
+ */
+ rc = clk_prepare_enable(pc->clk);
+ if (rc < 0)
+ return rc;
+
+ writel(prescale, pc->mmio_base + offset + PWMCR);
+ writel(dc, pc->mmio_base + offset + PWMDCR);
+ writel(pv, pc->mmio_base + offset + PWMPCR);
+
+ clk_disable_unprepare(pc->clk);
+ return 0;
+}
+
+static int pxa_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+ int rc = 0;
+
+ if (!pc->clk_enabled) {
+ rc = clk_prepare_enable(pc->clk);
+ if (!rc)
+ pc->clk_enabled++;
+ }
+ return rc;
+}
+
+static void pxa_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct pxa_pwm_chip *pc = to_pxa_pwm_chip(chip);
+
+ if (pc->clk_enabled) {
+ clk_disable_unprepare(pc->clk);
+ pc->clk_enabled--;
+ }
+}
+
+static struct pwm_ops pxa_pwm_ops = {
+ .config = pxa_pwm_config,
+ .enable = pxa_pwm_enable,
+ .disable = pxa_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ struct pxa_pwm_chip *pwm;
+ struct resource *r;
+ int ret = 0;
+
+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+ if (pwm == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pwm->clk))
+ return PTR_ERR(pwm->clk);
+
+ pwm->clk_enabled = 0;
+
+ pwm->chip.dev = &pdev->dev;
+ pwm->chip.ops = &pxa_pwm_ops;
+ pwm->chip.base = -1;
+ pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (pwm->mmio_base == NULL)
+ return -EADDRNOTAVAIL;
+
+ ret = pwmchip_add(&pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, pwm);
+ return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pxa_pwm_chip *chip;
+
+ chip = platform_get_drvdata(pdev);
+ if (chip == NULL)
+ return -ENODEV;
+
+ return pwmchip_remove(&chip->chip);
+}
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "pxa25x-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+ .id_table = pwm_id_table,
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/plat-samsung/pwm.c b/drivers/pwm/pwm-samsung.c
index d3583050fb0..d10386528c9 100644
--- a/arch/arm/plat-samsung/pwm.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -1,4 +1,4 @@
-/* arch/arm/plat-s3c/pwm.c
+/* drivers/pwm/pwm-samsung.c
*
* Copyright (c) 2007 Ben Dooks
* Copyright (c) 2008 Simtec Electronics
@@ -11,6 +11,8 @@
* the Free Software Foundation; either version 2 of the License.
*/
+#define pr_fmt(fmt) "pwm-samsung: " fmt
+
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
@@ -24,8 +26,7 @@
#include <plat/regs-timer.h>
-struct pwm_device {
- struct list_head list;
+struct s3c_chip {
struct platform_device *pdev;
struct clk *clk_div;
@@ -36,81 +37,36 @@ struct pwm_device {
unsigned int duty_ns;
unsigned char tcon_base;
- unsigned char use_count;
unsigned char pwm_id;
+ struct pwm_chip chip;
};
+#define to_s3c_chip(chip) container_of(chip, struct s3c_chip, chip)
+
#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
static struct clk *clk_scaler[2];
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
- return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
- struct pwm_device *pwm;
- int found = 0;
-
- mutex_lock(&pwm_lock);
-
- list_for_each_entry(pwm, &pwm_list, list) {
- if (pwm->pwm_id == pwm_id) {
- found = 1;
- break;
- }
- }
-
- if (found) {
- if (pwm->use_count == 0) {
- pwm->use_count = 1;
- pwm->label = label;
- } else
- pwm = ERR_PTR(-EBUSY);
- } else
- pwm = ERR_PTR(-ENOENT);
-
- mutex_unlock(&pwm_lock);
- return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
+static inline int pwm_is_tdiv(struct s3c_chip *chip)
{
- mutex_lock(&pwm_lock);
-
- if (pwm->use_count) {
- pwm->use_count--;
- pwm->label = NULL;
- } else
- printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
- mutex_unlock(&pwm_lock);
+ return clk_get_parent(chip->clk) == chip->clk_div;
}
-EXPORT_SYMBOL(pwm_free);
-
#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-int pwm_enable(struct pwm_device *pwm)
+static int s3c_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct s3c_chip *s3c = to_s3c_chip(chip);
unsigned long flags;
unsigned long tcon;
local_irq_save(flags);
tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_start(pwm);
+ tcon |= pwm_tcon_start(s3c);
__raw_writel(tcon, S3C2410_TCON);
local_irq_restore(flags);
@@ -118,31 +74,28 @@ int pwm_enable(struct pwm_device *pwm)
return 0;
}
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
+static void s3c_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct s3c_chip *s3c = to_s3c_chip(chip);
unsigned long flags;
unsigned long tcon;
local_irq_save(flags);
tcon = __raw_readl(S3C2410_TCON);
- tcon &= ~pwm_tcon_start(pwm);
+ tcon &= ~pwm_tcon_start(s3c);
__raw_writel(tcon, S3C2410_TCON);
local_irq_restore(flags);
}
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+static unsigned long pwm_calc_tin(struct s3c_chip *s3c, unsigned long freq)
{
unsigned long tin_parent_rate;
unsigned int div;
- tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
- pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+ tin_parent_rate = clk_get_rate(clk_get_parent(s3c->clk_div));
+ pwm_dbg(s3c, "tin parent at %lu\n", tin_parent_rate);
for (div = 2; div <= 16; div *= 2) {
if ((tin_parent_rate / (div << 16)) < freq)
@@ -154,8 +107,10 @@ static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
#define NS_IN_HZ (1000000000UL)
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
{
+ struct s3c_chip *s3c = to_s3c_chip(chip);
unsigned long tin_rate;
unsigned long tin_ns;
unsigned long period;
@@ -174,38 +129,38 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
if (duty_ns > period_ns)
return -EINVAL;
- if (period_ns == pwm->period_ns &&
- duty_ns == pwm->duty_ns)
+ if (period_ns == s3c->period_ns &&
+ duty_ns == s3c->duty_ns)
return 0;
/* The TCMP and TCNT can be read without a lock, they're not
* shared between the timers. */
- tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
- tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+ tcmp = __raw_readl(S3C2410_TCMPB(s3c->pwm_id));
+ tcnt = __raw_readl(S3C2410_TCNTB(s3c->pwm_id));
period = NS_IN_HZ / period_ns;
- pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+ pwm_dbg(s3c, "duty_ns=%d, period_ns=%d (%lu)\n",
duty_ns, period_ns, period);
/* Check to see if we are changing the clock rate of the PWM */
- if (pwm->period_ns != period_ns) {
- if (pwm_is_tdiv(pwm)) {
- tin_rate = pwm_calc_tin(pwm, period);
- clk_set_rate(pwm->clk_div, tin_rate);
+ if (s3c->period_ns != period_ns) {
+ if (pwm_is_tdiv(s3c)) {
+ tin_rate = pwm_calc_tin(s3c, period);
+ clk_set_rate(s3c->clk_div, tin_rate);
} else
- tin_rate = clk_get_rate(pwm->clk);
+ tin_rate = clk_get_rate(s3c->clk);
- pwm->period_ns = period_ns;
+ s3c->period_ns = period_ns;
- pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+ pwm_dbg(s3c, "tin_rate=%lu\n", tin_rate);
tin_ns = NS_IN_HZ / tin_rate;
tcnt = period_ns / tin_ns;
} else
- tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+ tin_ns = NS_IN_HZ / clk_get_rate(s3c->clk);
/* Note, counters count down */
@@ -216,7 +171,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
if (tcmp == tcnt)
tcmp--;
- pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+ pwm_dbg(s3c, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
if (tcmp < 0)
tcmp = 0;
@@ -225,15 +180,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
local_irq_save(flags);
- __raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
- __raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+ __raw_writel(tcmp, S3C2410_TCMPB(s3c->pwm_id));
+ __raw_writel(tcnt, S3C2410_TCNTB(s3c->pwm_id));
tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_manulupdate(pwm);
- tcon |= pwm_tcon_autoreload(pwm);
+ tcon |= pwm_tcon_manulupdate(s3c);
+ tcon |= pwm_tcon_autoreload(s3c);
__raw_writel(tcon, S3C2410_TCON);
- tcon &= ~pwm_tcon_manulupdate(pwm);
+ tcon &= ~pwm_tcon_manulupdate(s3c);
__raw_writel(tcon, S3C2410_TCON);
local_irq_restore(flags);
@@ -241,24 +196,17 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
return 0;
}
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
- pwm->duty_ns = -1;
- pwm->period_ns = -1;
-
- mutex_lock(&pwm_lock);
- list_add_tail(&pwm->list, &pwm_list);
- mutex_unlock(&pwm_lock);
-
- return 0;
-}
+static struct pwm_ops s3c_pwm_ops = {
+ .enable = s3c_pwm_enable,
+ .disable = s3c_pwm_disable,
+ .config = s3c_pwm_config,
+ .owner = THIS_MODULE,
+};
static int s3c_pwm_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct pwm_device *pwm;
+ struct s3c_chip *s3c;
unsigned long flags;
unsigned long tcon;
unsigned int id = pdev->id;
@@ -269,83 +217,75 @@ static int s3c_pwm_probe(struct platform_device *pdev)
return -ENXIO;
}
- pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
- if (pwm == NULL) {
+ s3c = devm_kzalloc(&pdev->dev, sizeof(*s3c), GFP_KERNEL);
+ if (s3c == NULL) {
dev_err(dev, "failed to allocate pwm_device\n");
return -ENOMEM;
}
- pwm->pdev = pdev;
- pwm->pwm_id = id;
-
/* calculate base of control bits in TCON */
- pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+ s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+ s3c->chip.ops = &s3c_pwm_ops;
+ s3c->chip.base = -1;
+ s3c->chip.npwm = 1;
- pwm->clk = clk_get(dev, "pwm-tin");
- if (IS_ERR(pwm->clk)) {
+ s3c->clk = devm_clk_get(dev, "pwm-tin");
+ if (IS_ERR(s3c->clk)) {
dev_err(dev, "failed to get pwm tin clk\n");
- ret = PTR_ERR(pwm->clk);
- goto err_alloc;
+ return PTR_ERR(s3c->clk);
}
- pwm->clk_div = clk_get(dev, "pwm-tdiv");
- if (IS_ERR(pwm->clk_div)) {
+ s3c->clk_div = devm_clk_get(dev, "pwm-tdiv");
+ if (IS_ERR(s3c->clk_div)) {
dev_err(dev, "failed to get pwm tdiv clk\n");
- ret = PTR_ERR(pwm->clk_div);
- goto err_clk_tin;
+ return PTR_ERR(s3c->clk_div);
}
- clk_enable(pwm->clk);
- clk_enable(pwm->clk_div);
+ clk_enable(s3c->clk);
+ clk_enable(s3c->clk_div);
local_irq_save(flags);
tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_invert(pwm);
+ tcon |= pwm_tcon_invert(s3c);
__raw_writel(tcon, S3C2410_TCON);
local_irq_restore(flags);
-
- ret = pwm_register(pwm);
- if (ret) {
+ ret = pwmchip_add(&s3c->chip);
+ if (ret < 0) {
dev_err(dev, "failed to register pwm\n");
goto err_clk_tdiv;
}
- pwm_dbg(pwm, "config bits %02x\n",
- (__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+ pwm_dbg(s3c, "config bits %02x\n",
+ (__raw_readl(S3C2410_TCON) >> s3c->tcon_base) & 0x0f);
dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
- clk_get_rate(pwm->clk),
- clk_get_rate(pwm->clk_div),
- pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+ clk_get_rate(s3c->clk),
+ clk_get_rate(s3c->clk_div),
+ pwm_is_tdiv(s3c) ? "div" : "ext", s3c->tcon_base);
- platform_set_drvdata(pdev, pwm);
+ platform_set_drvdata(pdev, s3c);
return 0;
err_clk_tdiv:
- clk_disable(pwm->clk_div);
- clk_disable(pwm->clk);
- clk_put(pwm->clk_div);
-
- err_clk_tin:
- clk_put(pwm->clk);
-
- err_alloc:
- kfree(pwm);
+ clk_disable(s3c->clk_div);
+ clk_disable(s3c->clk);
return ret;
}
static int __devexit s3c_pwm_remove(struct platform_device *pdev)
{
- struct pwm_device *pwm = platform_get_drvdata(pdev);
+ struct s3c_chip *s3c = platform_get_drvdata(pdev);
+ int err;
+
+ err = pwmchip_remove(&s3c->chip);
+ if (err < 0)
+ return err;
- clk_disable(pwm->clk_div);
- clk_disable(pwm->clk);
- clk_put(pwm->clk_div);
- clk_put(pwm->clk);
- kfree(pwm);
+ clk_disable(s3c->clk_div);
+ clk_disable(s3c->clk);
return 0;
}
@@ -353,26 +293,26 @@ static int __devexit s3c_pwm_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int s3c_pwm_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct pwm_device *pwm = platform_get_drvdata(pdev);
+ struct s3c_chip *s3c = platform_get_drvdata(pdev);
/* No one preserve these values during suspend so reset them
* Otherwise driver leaves PWM unconfigured if same values
* passed to pwm_config
*/
- pwm->period_ns = 0;
- pwm->duty_ns = 0;
+ s3c->period_ns = 0;
+ s3c->duty_ns = 0;
return 0;
}
static int s3c_pwm_resume(struct platform_device *pdev)
{
- struct pwm_device *pwm = platform_get_drvdata(pdev);
+ struct s3c_chip *s3c = platform_get_drvdata(pdev);
unsigned long tcon;
/* Restore invertion */
tcon = __raw_readl(S3C2410_TCON);
- tcon |= pwm_tcon_invert(pwm);
+ tcon |= pwm_tcon_invert(s3c);
__raw_writel(tcon, S3C2410_TCON);
return 0;
@@ -402,13 +342,13 @@ static int __init pwm_init(void)
clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
- printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+ pr_err("failed to get scaler clocks\n");
return -EINVAL;
}
ret = platform_driver_register(&s3c_pwm_driver);
if (ret)
- printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+ pr_err("failed to add pwm driver\n");
return ret;
}
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
new file mode 100644
index 00000000000..02ce18d5e49
--- /dev/null
+++ b/drivers/pwm/pwm-tegra.c
@@ -0,0 +1,261 @@
+/*
+ * drivers/pwm/pwm-tegra.c
+ *
+ * Tegra pulse-width-modulation controller driver
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ * Based on arch/arm/plat-mxc/pwm.c by Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pwm.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define PWM_ENABLE (1 << 31)
+#define PWM_DUTY_WIDTH 8
+#define PWM_DUTY_SHIFT 16
+#define PWM_SCALE_WIDTH 13
+#define PWM_SCALE_SHIFT 0
+
+#define NUM_PWM 4
+
+struct tegra_pwm_chip {
+ struct pwm_chip chip;
+ struct device *dev;
+
+ struct clk *clk;
+
+ void __iomem *mmio_base;
+};
+
+static inline struct tegra_pwm_chip *to_tegra_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct tegra_pwm_chip, chip);
+}
+
+static inline u32 pwm_readl(struct tegra_pwm_chip *chip, unsigned int num)
+{
+ return readl(chip->mmio_base + (num << 4));
+}
+
+static inline void pwm_writel(struct tegra_pwm_chip *chip, unsigned int num,
+ unsigned long val)
+{
+ writel(val, chip->mmio_base + (num << 4));
+}
+
+static int tegra_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+ unsigned long long c;
+ unsigned long rate, hz;
+ u32 val = 0;
+ int err;
+
+ /*
+ * Convert from duty_ns / period_ns to a fixed number of duty ticks
+ * per (1 << PWM_DUTY_WIDTH) cycles and make sure to round to the
+ * nearest integer during division.
+ */
+ c = duty_ns * ((1 << PWM_DUTY_WIDTH) - 1) + period_ns / 2;
+ do_div(c, period_ns);
+
+ val = (u32)c << PWM_DUTY_SHIFT;
+
+ /*
+ * Compute the prescaler value for which (1 << PWM_DUTY_WIDTH)
+ * cycles at the PWM clock rate will take period_ns nanoseconds.
+ */
+ rate = clk_get_rate(pc->clk) >> PWM_DUTY_WIDTH;
+ hz = 1000000000ul / period_ns;
+
+ rate = (rate + (hz / 2)) / hz;
+
+ /*
+ * Since the actual PWM divider is the register's frequency divider
+ * field minus 1, we need to decrement to get the correct value to
+ * write to the register.
+ */
+ if (rate > 0)
+ rate--;
+
+ /*
+ * Make sure that the rate will fit in the register's frequency
+ * divider field.
+ */
+ if (rate >> PWM_SCALE_WIDTH)
+ return -EINVAL;
+
+ val |= rate << PWM_SCALE_SHIFT;
+
+ /*
+ * If the PWM channel is disabled, make sure to turn on the clock
+ * before writing the register. Otherwise, keep it enabled.
+ */
+ if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ err = clk_prepare_enable(pc->clk);
+ if (err < 0)
+ return err;
+ } else
+ val |= PWM_ENABLE;
+
+ pwm_writel(pc, pwm->hwpwm, val);
+
+ /*
+ * If the PWM is not enabled, turn the clock off again to save power.
+ */
+ if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ clk_disable_unprepare(pc->clk);
+
+ return 0;
+}
+
+static int tegra_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+ int rc = 0;
+ u32 val;
+
+ rc = clk_prepare_enable(pc->clk);
+ if (rc < 0)
+ return rc;
+
+ val = pwm_readl(pc, pwm->hwpwm);
+ val |= PWM_ENABLE;
+ pwm_writel(pc, pwm->hwpwm, val);
+
+ return 0;
+}
+
+static void tegra_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct tegra_pwm_chip *pc = to_tegra_pwm_chip(chip);
+ u32 val;
+
+ val = pwm_readl(pc, pwm->hwpwm);
+ val &= ~PWM_ENABLE;
+ pwm_writel(pc, pwm->hwpwm, val);
+
+ clk_disable_unprepare(pc->clk);
+}
+
+static const struct pwm_ops tegra_pwm_ops = {
+ .config = tegra_pwm_config,
+ .enable = tegra_pwm_enable,
+ .disable = tegra_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int tegra_pwm_probe(struct platform_device *pdev)
+{
+ struct tegra_pwm_chip *pwm;
+ struct resource *r;
+ int ret;
+
+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
+ if (!pwm) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ pwm->dev = &pdev->dev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resources defined\n");
+ return -ENODEV;
+ }
+
+ pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!pwm->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap() region\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ platform_set_drvdata(pdev, pwm);
+
+ pwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pwm->clk))
+ return PTR_ERR(pwm->clk);
+
+ pwm->chip.dev = &pdev->dev;
+ pwm->chip.ops = &tegra_pwm_ops;
+ pwm->chip.base = -1;
+ pwm->chip.npwm = NUM_PWM;
+
+ ret = pwmchip_add(&pwm->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit tegra_pwm_remove(struct platform_device *pdev)
+{
+ struct tegra_pwm_chip *pc = platform_get_drvdata(pdev);
+ int i;
+
+ if (WARN_ON(!pc))
+ return -ENODEV;
+
+ for (i = 0; i < NUM_PWM; i++) {
+ struct pwm_device *pwm = &pc->chip.pwms[i];
+
+ if (!test_bit(PWMF_ENABLED, &pwm->flags))
+ if (clk_prepare_enable(pc->clk) < 0)
+ continue;
+
+ pwm_writel(pc, i, 0);
+
+ clk_disable_unprepare(pc->clk);
+ }
+
+ return pwmchip_remove(&pc->chip);
+}
+
+#ifdef CONFIG_OF
+static struct of_device_id tegra_pwm_of_match[] = {
+ { .compatible = "nvidia,tegra20-pwm" },
+ { .compatible = "nvidia,tegra30-pwm" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);
+#endif
+
+static struct platform_driver tegra_pwm_driver = {
+ .driver = {
+ .name = "tegra-pwm",
+ .of_match_table = of_match_ptr(tegra_pwm_of_match),
+ },
+ .probe = tegra_pwm_probe,
+ .remove = __devexit_p(tegra_pwm_remove),
+};
+
+module_platform_driver(tegra_pwm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("NVIDIA Corporation");
+MODULE_ALIAS("platform:tegra-pwm");
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
new file mode 100644
index 00000000000..3c2ad284ee3
--- /dev/null
+++ b/drivers/pwm/pwm-tiecap.c
@@ -0,0 +1,232 @@
+/*
+ * ECAP PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+#include <linux/pwm.h>
+
+/* ECAP registers and bits definitions */
+#define CAP1 0x08
+#define CAP2 0x0C
+#define CAP3 0x10
+#define CAP4 0x14
+#define ECCTL2 0x2A
+#define ECCTL2_APWM_MODE BIT(9)
+#define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6))
+#define ECCTL2_TSCTR_FREERUN BIT(4)
+
+struct ecap_pwm_chip {
+ struct pwm_chip chip;
+ unsigned int clk_rate;
+ void __iomem *mmio_base;
+};
+
+static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct ecap_pwm_chip, chip);
+}
+
+/*
+ * period_ns = 10^9 * period_cycles / PWM_CLK_RATE
+ * duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE
+ */
+static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles;
+ unsigned int reg_val;
+
+ if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
+ return -ERANGE;
+
+ c = pc->clk_rate;
+ c = c * period_ns;
+ do_div(c, NSEC_PER_SEC);
+ period_cycles = (unsigned long)c;
+
+ if (period_cycles < 1) {
+ period_cycles = 1;
+ duty_cycles = 1;
+ } else {
+ c = pc->clk_rate;
+ c = c * duty_ns;
+ do_div(c, NSEC_PER_SEC);
+ duty_cycles = (unsigned long)c;
+ }
+
+ pm_runtime_get_sync(pc->chip.dev);
+
+ reg_val = readw(pc->mmio_base + ECCTL2);
+
+ /* Configure APWM mode & disable sync option */
+ reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
+
+ writew(reg_val, pc->mmio_base + ECCTL2);
+
+ if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
+ /* Update active registers if not running */
+ writel(duty_cycles, pc->mmio_base + CAP2);
+ writel(period_cycles, pc->mmio_base + CAP1);
+ } else {
+ /*
+ * Update shadow registers to configure period and
+ * compare values. This helps current PWM period to
+ * complete on reconfiguring
+ */
+ writel(duty_cycles, pc->mmio_base + CAP4);
+ writel(period_cycles, pc->mmio_base + CAP3);
+ }
+
+ pm_runtime_put_sync(pc->chip.dev);
+ return 0;
+}
+
+static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+ unsigned int reg_val;
+
+ /* Leave clock enabled on enabling PWM */
+ pm_runtime_get_sync(pc->chip.dev);
+
+ /*
+ * Enable 'Free run Time stamp counter mode' to start counter
+ * and 'APWM mode' to enable APWM output
+ */
+ reg_val = readw(pc->mmio_base + ECCTL2);
+ reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
+ writew(reg_val, pc->mmio_base + ECCTL2);
+ return 0;
+}
+
+static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
+ unsigned int reg_val;
+
+ /*
+ * Disable 'Free run Time stamp counter mode' to stop counter
+ * and 'APWM mode' to put APWM output to low
+ */
+ reg_val = readw(pc->mmio_base + ECCTL2);
+ reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
+ writew(reg_val, pc->mmio_base + ECCTL2);
+
+ /* Disable clock on PWM disable */
+ pm_runtime_put_sync(pc->chip.dev);
+}
+
+static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+ dev_warn(chip->dev, "Removing PWM device without disabling\n");
+ pm_runtime_put_sync(chip->dev);
+ }
+}
+
+static const struct pwm_ops ecap_pwm_ops = {
+ .free = ecap_pwm_free,
+ .config = ecap_pwm_config,
+ .enable = ecap_pwm_enable,
+ .disable = ecap_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit ecap_pwm_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct clk *clk;
+ struct ecap_pwm_chip *pc;
+
+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ clk = devm_clk_get(&pdev->dev, "fck");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ pc->clk_rate = clk_get_rate(clk);
+ if (!pc->clk_rate) {
+ dev_err(&pdev->dev, "failed to get clock rate\n");
+ return -EINVAL;
+ }
+
+ pc->chip.dev = &pdev->dev;
+ pc->chip.ops = &ecap_pwm_ops;
+ pc->chip.base = -1;
+ pc->chip.npwm = 1;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!pc->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ return ret;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ platform_set_drvdata(pdev, pc);
+ return 0;
+}
+
+static int __devexit ecap_pwm_remove(struct platform_device *pdev)
+{
+ struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return pwmchip_remove(&pc->chip);
+}
+
+static struct platform_driver ecap_pwm_driver = {
+ .driver = {
+ .name = "ecap",
+ },
+ .probe = ecap_pwm_probe,
+ .remove = __devexit_p(ecap_pwm_remove),
+};
+
+module_platform_driver(ecap_pwm_driver);
+
+MODULE_DESCRIPTION("ECAP PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
new file mode 100644
index 00000000000..010d232cb0c
--- /dev/null
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -0,0 +1,411 @@
+/*
+ * EHRPWM PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+
+/* EHRPWM registers and bits definitions */
+
+/* Time base module registers */
+#define TBCTL 0x00
+#define TBPRD 0x0A
+
+#define TBCTL_RUN_MASK (BIT(15) | BIT(14))
+#define TBCTL_STOP_NEXT 0
+#define TBCTL_STOP_ON_CYCLE BIT(14)
+#define TBCTL_FREE_RUN (BIT(15) | BIT(14))
+#define TBCTL_PRDLD_MASK BIT(3)
+#define TBCTL_PRDLD_SHDW 0
+#define TBCTL_PRDLD_IMDT BIT(3)
+#define TBCTL_CLKDIV_MASK (BIT(12) | BIT(11) | BIT(10) | BIT(9) | \
+ BIT(8) | BIT(7))
+#define TBCTL_CTRMODE_MASK (BIT(1) | BIT(0))
+#define TBCTL_CTRMODE_UP 0
+#define TBCTL_CTRMODE_DOWN BIT(0)
+#define TBCTL_CTRMODE_UPDOWN BIT(1)
+#define TBCTL_CTRMODE_FREEZE (BIT(1) | BIT(0))
+
+#define TBCTL_HSPCLKDIV_SHIFT 7
+#define TBCTL_CLKDIV_SHIFT 10
+
+#define CLKDIV_MAX 7
+#define HSPCLKDIV_MAX 7
+#define PERIOD_MAX 0xFFFF
+
+/* compare module registers */
+#define CMPA 0x12
+#define CMPB 0x14
+
+/* Action qualifier module registers */
+#define AQCTLA 0x16
+#define AQCTLB 0x18
+#define AQSFRC 0x1A
+#define AQCSFRC 0x1C
+
+#define AQCTL_CBU_MASK (BIT(9) | BIT(8))
+#define AQCTL_CBU_FRCLOW BIT(8)
+#define AQCTL_CBU_FRCHIGH BIT(9)
+#define AQCTL_CBU_FRCTOGGLE (BIT(9) | BIT(8))
+#define AQCTL_CAU_MASK (BIT(5) | BIT(4))
+#define AQCTL_CAU_FRCLOW BIT(4)
+#define AQCTL_CAU_FRCHIGH BIT(5)
+#define AQCTL_CAU_FRCTOGGLE (BIT(5) | BIT(4))
+#define AQCTL_PRD_MASK (BIT(3) | BIT(2))
+#define AQCTL_PRD_FRCLOW BIT(2)
+#define AQCTL_PRD_FRCHIGH BIT(3)
+#define AQCTL_PRD_FRCTOGGLE (BIT(3) | BIT(2))
+#define AQCTL_ZRO_MASK (BIT(1) | BIT(0))
+#define AQCTL_ZRO_FRCLOW BIT(0)
+#define AQCTL_ZRO_FRCHIGH BIT(1)
+#define AQCTL_ZRO_FRCTOGGLE (BIT(1) | BIT(0))
+
+#define AQSFRC_RLDCSF_MASK (BIT(7) | BIT(6))
+#define AQSFRC_RLDCSF_ZRO 0
+#define AQSFRC_RLDCSF_PRD BIT(6)
+#define AQSFRC_RLDCSF_ZROPRD BIT(7)
+#define AQSFRC_RLDCSF_IMDT (BIT(7) | BIT(6))
+
+#define AQCSFRC_CSFB_MASK (BIT(3) | BIT(2))
+#define AQCSFRC_CSFB_FRCDIS 0
+#define AQCSFRC_CSFB_FRCLOW BIT(2)
+#define AQCSFRC_CSFB_FRCHIGH BIT(3)
+#define AQCSFRC_CSFB_DISSWFRC (BIT(3) | BIT(2))
+#define AQCSFRC_CSFA_MASK (BIT(1) | BIT(0))
+#define AQCSFRC_CSFA_FRCDIS 0
+#define AQCSFRC_CSFA_FRCLOW BIT(0)
+#define AQCSFRC_CSFA_FRCHIGH BIT(1)
+#define AQCSFRC_CSFA_DISSWFRC (BIT(1) | BIT(0))
+
+#define NUM_PWM_CHANNEL 2 /* EHRPWM channels */
+
+struct ehrpwm_pwm_chip {
+ struct pwm_chip chip;
+ unsigned int clk_rate;
+ void __iomem *mmio_base;
+};
+
+static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
+{
+ return container_of(chip, struct ehrpwm_pwm_chip, chip);
+}
+
+static void ehrpwm_write(void *base, int offset, unsigned int val)
+{
+ writew(val & 0xFFFF, base + offset);
+}
+
+static void ehrpwm_modify(void *base, int offset,
+ unsigned short mask, unsigned short val)
+{
+ unsigned short regval;
+
+ regval = readw(base + offset);
+ regval &= ~mask;
+ regval |= val & mask;
+ writew(regval, base + offset);
+}
+
+/**
+ * set_prescale_div - Set up the prescaler divider function
+ * @rqst_prescaler: prescaler value min
+ * @prescale_div: prescaler value set
+ * @tb_clk_div: Time Base Control prescaler bits
+ */
+static int set_prescale_div(unsigned long rqst_prescaler,
+ unsigned short *prescale_div, unsigned short *tb_clk_div)
+{
+ unsigned int clkdiv, hspclkdiv;
+
+ for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) {
+ for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) {
+
+ /*
+ * calculations for prescaler value :
+ * prescale_div = HSPCLKDIVIDER * CLKDIVIDER.
+ * HSPCLKDIVIDER = 2 ** hspclkdiv
+ * CLKDIVIDER = (1), if clkdiv == 0 *OR*
+ * (2 * clkdiv), if clkdiv != 0
+ *
+ * Configure prescale_div value such that period
+ * register value is less than 65535.
+ */
+
+ *prescale_div = (1 << clkdiv) *
+ (hspclkdiv ? (hspclkdiv * 2) : 1);
+ if (*prescale_div > rqst_prescaler) {
+ *tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) |
+ (hspclkdiv << TBCTL_HSPCLKDIV_SHIFT);
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
+static void configure_chans(struct ehrpwm_pwm_chip *pc, int chan,
+ unsigned long duty_cycles)
+{
+ int cmp_reg, aqctl_reg;
+ unsigned short aqctl_val, aqctl_mask;
+
+ /*
+ * Channels can be configured from action qualifier module.
+ * Channel 0 configured with compare A register and for
+ * up-counter mode.
+ * Channel 1 configured with compare B register and for
+ * up-counter mode.
+ */
+ if (chan == 1) {
+ aqctl_reg = AQCTLB;
+ cmp_reg = CMPB;
+ /* Configure PWM Low from compare B value */
+ aqctl_val = AQCTL_CBU_FRCLOW;
+ aqctl_mask = AQCTL_CBU_MASK;
+ } else {
+ cmp_reg = CMPA;
+ aqctl_reg = AQCTLA;
+ /* Configure PWM Low from compare A value*/
+ aqctl_val = AQCTL_CAU_FRCLOW;
+ aqctl_mask = AQCTL_CAU_MASK;
+ }
+
+ /* Configure PWM High from period value and zero value */
+ aqctl_val |= AQCTL_PRD_FRCHIGH | AQCTL_ZRO_FRCHIGH;
+ aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
+ ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
+
+ ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+}
+
+/*
+ * period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE
+ * duty_ns = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE
+ */
+static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles;
+ unsigned short ps_divval, tb_divval;
+
+ if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
+ return -ERANGE;
+
+ c = pc->clk_rate;
+ c = c * period_ns;
+ do_div(c, NSEC_PER_SEC);
+ period_cycles = (unsigned long)c;
+
+ if (period_cycles < 1) {
+ period_cycles = 1;
+ duty_cycles = 1;
+ } else {
+ c = pc->clk_rate;
+ c = c * duty_ns;
+ do_div(c, NSEC_PER_SEC);
+ duty_cycles = (unsigned long)c;
+ }
+
+ /* Configure clock prescaler to support Low frequency PWM wave */
+ if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
+ &tb_divval)) {
+ dev_err(chip->dev, "Unsupported values\n");
+ return -EINVAL;
+ }
+
+ pm_runtime_get_sync(chip->dev);
+
+ /* Update clock prescaler values */
+ ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval);
+
+ /* Update period & duty cycle with presacler division */
+ period_cycles = period_cycles / ps_divval;
+ duty_cycles = duty_cycles / ps_divval;
+
+ /* Configure shadow loading on Period register */
+ ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW);
+
+ ehrpwm_write(pc->mmio_base, TBPRD, period_cycles);
+
+ /* Configure ehrpwm counter for up-count mode */
+ ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
+ TBCTL_CTRMODE_UP);
+
+ /* Configure the channel for duty cycle */
+ configure_chans(pc, pwm->hwpwm, duty_cycles);
+ pm_runtime_put_sync(chip->dev);
+ return 0;
+}
+
+static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+ unsigned short aqcsfrc_val, aqcsfrc_mask;
+
+ /* Leave clock enabled on enabling PWM */
+ pm_runtime_get_sync(chip->dev);
+
+ /* Disabling Action Qualifier on PWM output */
+ if (pwm->hwpwm) {
+ aqcsfrc_val = AQCSFRC_CSFB_FRCDIS;
+ aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+ } else {
+ aqcsfrc_val = AQCSFRC_CSFA_FRCDIS;
+ aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+ }
+
+ /* Changes to shadow mode */
+ ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+ AQSFRC_RLDCSF_ZRO);
+
+ ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+ /* Enable time counter for free_run */
+ ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
+ return 0;
+}
+
+static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+ unsigned short aqcsfrc_val, aqcsfrc_mask;
+
+ /* Action Qualifier puts PWM output low forcefully */
+ if (pwm->hwpwm) {
+ aqcsfrc_val = AQCSFRC_CSFB_FRCLOW;
+ aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+ } else {
+ aqcsfrc_val = AQCSFRC_CSFA_FRCLOW;
+ aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+ }
+
+ /*
+ * Changes to immediate action on Action Qualifier. This puts
+ * Action Qualifier control on PWM output from next TBCLK
+ */
+ ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+ AQSFRC_RLDCSF_IMDT);
+
+ ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+ /* Stop Time base counter */
+ ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
+
+ /* Disable clock on PWM disable */
+ pm_runtime_put_sync(chip->dev);
+}
+
+static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+ dev_warn(chip->dev, "Removing PWM device without disabling\n");
+ pm_runtime_put_sync(chip->dev);
+ }
+}
+
+static const struct pwm_ops ehrpwm_pwm_ops = {
+ .free = ehrpwm_pwm_free,
+ .config = ehrpwm_pwm_config,
+ .enable = ehrpwm_pwm_enable,
+ .disable = ehrpwm_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct clk *clk;
+ struct ehrpwm_pwm_chip *pc;
+
+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ clk = devm_clk_get(&pdev->dev, "fck");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ return PTR_ERR(clk);
+ }
+
+ pc->clk_rate = clk_get_rate(clk);
+ if (!pc->clk_rate) {
+ dev_err(&pdev->dev, "failed to get clock rate\n");
+ return -EINVAL;
+ }
+
+ pc->chip.dev = &pdev->dev;
+ pc->chip.ops = &ehrpwm_pwm_ops;
+ pc->chip.base = -1;
+ pc->chip.npwm = NUM_PWM_CHANNEL;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (!pc->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ return -EADDRNOTAVAIL;
+ }
+
+ ret = pwmchip_add(&pc->chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+ return ret;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ platform_set_drvdata(pdev, pc);
+ return 0;
+}
+
+static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev)
+{
+ struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return pwmchip_remove(&pc->chip);
+}
+
+static struct platform_driver ehrpwm_pwm_driver = {
+ .driver = {
+ .name = "ehrpwm",
+ },
+ .probe = ehrpwm_pwm_probe,
+ .remove = __devexit_p(ehrpwm_pwm_remove),
+};
+
+module_platform_driver(ehrpwm_pwm_driver);
+
+MODULE_DESCRIPTION("EHRPWM PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
new file mode 100644
index 00000000000..548021439f0
--- /dev/null
+++ b/drivers/pwm/pwm-vt8500.c
@@ -0,0 +1,177 @@
+/*
+ * drivers/pwm/pwm-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+
+#include <asm/div64.h>
+
+#define VT8500_NR_PWMS 4
+
+struct vt8500_chip {
+ struct pwm_chip chip;
+ void __iomem *base;
+};
+
+#define to_vt8500_chip(chip) container_of(chip, struct vt8500_chip, chip)
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
+{
+ int loops = msecs_to_loops(10);
+ while ((readb(reg) & bitmask) && --loops)
+ cpu_relax();
+
+ if (unlikely(!loops))
+ pr_warning("Waiting for status bits 0x%x to clear timed out\n",
+ bitmask);
+}
+
+static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+ int duty_ns, int period_ns)
+{
+ struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ c = 25000000/2; /* wild guess --- need to implement clocks */
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 4096;
+ pv = period_cycles / (prescale + 1) - 1;
+ if (pv > 4095)
+ pv = 4095;
+
+ if (prescale > 1023)
+ return -EINVAL;
+
+ c = (unsigned long long)pv * duty_ns;
+ do_div(c, period_ns);
+ dc = c;
+
+ pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 1));
+ writel(prescale, vt8500->base + 0x4 + (pwm->hwpwm << 4));
+
+ pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 2));
+ writel(pv, vt8500->base + 0x8 + (pwm->hwpwm << 4));
+
+ pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 3));
+ writel(dc, vt8500->base + 0xc + (pwm->hwpwm << 4));
+
+ return 0;
+}
+
+static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+
+ pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
+ writel(5, vt8500->base + (pwm->hwpwm << 4));
+ return 0;
+}
+
+static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+ struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
+
+ pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
+ writel(0, vt8500->base + (pwm->hwpwm << 4));
+}
+
+static struct pwm_ops vt8500_pwm_ops = {
+ .enable = vt8500_pwm_enable,
+ .disable = vt8500_pwm_disable,
+ .config = vt8500_pwm_config,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ struct vt8500_chip *chip;
+ struct resource *r;
+ int ret;
+
+ chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+ if (chip == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ chip->chip.dev = &pdev->dev;
+ chip->chip.ops = &vt8500_pwm_ops;
+ chip->chip.base = -1;
+ chip->chip.npwm = VT8500_NR_PWMS;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ return -ENODEV;
+ }
+
+ chip->base = devm_request_and_ioremap(&pdev->dev, r);
+ if (chip->base == NULL)
+ return -EADDRNOTAVAIL;
+
+ ret = pwmchip_add(&chip->chip);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, chip);
+ return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct vt8500_chip *chip;
+
+ chip = platform_get_drvdata(pdev);
+ if (chip == NULL)
+ return -ENODEV;
+
+ return pwmchip_remove(&chip->chip);
+}
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "vt8500-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 2979292650d..cf282763a8d 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -245,7 +245,7 @@ config BACKLIGHT_CARILLO_RANCH
config BACKLIGHT_PWM
tristate "Generic PWM based Backlight Driver"
- depends on HAVE_PWM
+ depends on PWM
help
If you have a LCD backlight adjustable by PWM, say Y to enable
this driver.
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 342b7d7cbb6..995f0164c9b 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -26,11 +26,13 @@ struct pwm_bl_data {
struct device *dev;
unsigned int period;
unsigned int lth_brightness;
+ unsigned int *levels;
int (*notify)(struct device *,
int brightness);
void (*notify_after)(struct device *,
int brightness);
int (*check_fb)(struct device *, struct fb_info *);
+ void (*exit)(struct device *);
};
static int pwm_backlight_update_status(struct backlight_device *bl)
@@ -52,9 +54,18 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
} else {
- brightness = pb->lth_brightness +
- (brightness * (pb->period - pb->lth_brightness) / max);
- pwm_config(pb->pwm, brightness, pb->period);
+ int duty_cycle;
+
+ if (pb->levels) {
+ duty_cycle = pb->levels[brightness];
+ max = pb->levels[max];
+ } else {
+ duty_cycle = brightness;
+ }
+
+ duty_cycle = pb->lth_brightness +
+ (duty_cycle * (pb->period - pb->lth_brightness) / max);
+ pwm_config(pb->pwm, duty_cycle, pb->period);
pwm_enable(pb->pwm);
}
@@ -83,17 +94,98 @@ static const struct backlight_ops pwm_backlight_ops = {
.check_fb = pwm_backlight_check_fb,
};
+#ifdef CONFIG_OF
+static int pwm_backlight_parse_dt(struct device *dev,
+ struct platform_pwm_backlight_data *data)
+{
+ struct device_node *node = dev->of_node;
+ struct property *prop;
+ int length;
+ u32 value;
+ int ret;
+
+ if (!node)
+ return -ENODEV;
+
+ memset(data, 0, sizeof(*data));
+
+ /* determine the number of brightness levels */
+ prop = of_find_property(node, "brightness-levels", &length);
+ if (!prop)
+ return -EINVAL;
+
+ data->max_brightness = length / sizeof(u32);
+
+ /* read brightness levels from DT property */
+ if (data->max_brightness > 0) {
+ size_t size = sizeof(*data->levels) * data->max_brightness;
+
+ data->levels = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!data->levels)
+ return -ENOMEM;
+
+ ret = of_property_read_u32_array(node, "brightness-levels",
+ data->levels,
+ data->max_brightness);
+ if (ret < 0)
+ return ret;
+
+ ret = of_property_read_u32(node, "default-brightness-level",
+ &value);
+ if (ret < 0)
+ return ret;
+
+ if (value >= data->max_brightness) {
+ dev_warn(dev, "invalid default brightness level: %u, using %u\n",
+ value, data->max_brightness - 1);
+ value = data->max_brightness - 1;
+ }
+
+ data->dft_brightness = value;
+ data->max_brightness--;
+ }
+
+ /*
+ * TODO: Most users of this driver use a number of GPIOs to control
+ * backlight power. Support for specifying these needs to be
+ * added.
+ */
+
+ return 0;
+}
+
+static struct of_device_id pwm_backlight_of_match[] = {
+ { .compatible = "pwm-backlight" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, pwm_backlight_of_match);
+#else
+static int pwm_backlight_parse_dt(struct device *dev,
+ struct platform_pwm_backlight_data *data)
+{
+ return -ENODEV;
+}
+#endif
+
static int pwm_backlight_probe(struct platform_device *pdev)
{
- struct backlight_properties props;
struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
+ struct platform_pwm_backlight_data defdata;
+ struct backlight_properties props;
struct backlight_device *bl;
struct pwm_bl_data *pb;
+ unsigned int max;
int ret;
if (!data) {
- dev_err(&pdev->dev, "failed to find platform data\n");
- return -EINVAL;
+ ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to find platform data\n");
+ return ret;
+ }
+
+ data = &defdata;
}
if (data->init) {
@@ -109,21 +201,42 @@ static int pwm_backlight_probe(struct platform_device *pdev)
goto err_alloc;
}
- pb->period = data->pwm_period_ns;
+ if (data->levels) {
+ max = data->levels[data->max_brightness];
+ pb->levels = data->levels;
+ } else
+ max = data->max_brightness;
+
pb->notify = data->notify;
pb->notify_after = data->notify_after;
pb->check_fb = data->check_fb;
- pb->lth_brightness = data->lth_brightness *
- (data->pwm_period_ns / data->max_brightness);
+ pb->exit = data->exit;
pb->dev = &pdev->dev;
- pb->pwm = pwm_request(data->pwm_id, "backlight");
+ pb->pwm = pwm_get(&pdev->dev, NULL);
if (IS_ERR(pb->pwm)) {
- dev_err(&pdev->dev, "unable to request PWM for backlight\n");
- ret = PTR_ERR(pb->pwm);
- goto err_alloc;
- } else
- dev_dbg(&pdev->dev, "got pwm for backlight\n");
+ dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
+
+ pb->pwm = pwm_request(data->pwm_id, "pwm-backlight");
+ if (IS_ERR(pb->pwm)) {
+ dev_err(&pdev->dev, "unable to request legacy PWM\n");
+ ret = PTR_ERR(pb->pwm);
+ goto err_alloc;
+ }
+ }
+
+ dev_dbg(&pdev->dev, "got pwm for backlight\n");
+
+ /*
+ * The DT case will set the pwm_period_ns field to 0 and store the
+ * period, parsed from the DT, in the PWM device. For the non-DT case,
+ * set the period from platform data.
+ */
+ if (data->pwm_period_ns > 0)
+ pwm_set_period(pb->pwm, data->pwm_period_ns);
+
+ pb->period = pwm_get_period(pb->pwm);
+ pb->lth_brightness = data->lth_brightness * (pb->period / max);
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
@@ -143,7 +256,7 @@ static int pwm_backlight_probe(struct platform_device *pdev)
return 0;
err_bl:
- pwm_free(pb->pwm);
+ pwm_put(pb->pwm);
err_alloc:
if (data->exit)
data->exit(&pdev->dev);
@@ -152,16 +265,15 @@ err_alloc:
static int pwm_backlight_remove(struct platform_device *pdev)
{
- struct platform_pwm_backlight_data *data = pdev->dev.platform_data;
struct backlight_device *bl = platform_get_drvdata(pdev);
struct pwm_bl_data *pb = dev_get_drvdata(&bl->dev);
backlight_device_unregister(bl);
pwm_config(pb->pwm, 0, pb->period);
pwm_disable(pb->pwm);
- pwm_free(pb->pwm);
- if (data->exit)
- data->exit(&pdev->dev);
+ pwm_put(pb->pwm);
+ if (pb->exit)
+ pb->exit(&pdev->dev);
return 0;
}
@@ -195,11 +307,12 @@ static SIMPLE_DEV_PM_OPS(pwm_backlight_pm_ops, pwm_backlight_suspend,
static struct platform_driver pwm_backlight_driver = {
.driver = {
- .name = "pwm-backlight",
- .owner = THIS_MODULE,
+ .name = "pwm-backlight",
+ .owner = THIS_MODULE,
#ifdef CONFIG_PM
- .pm = &pwm_backlight_pm_ops,
+ .pm = &pwm_backlight_pm_ops,
#endif
+ .of_match_table = of_match_ptr(pwm_backlight_of_match),
},
.probe = pwm_backlight_probe,
.remove = pwm_backlight_remove,
diff --git a/include/linux/of.h b/include/linux/of.h
index 0e9cf9eec08..42c2a58328c 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -386,6 +386,13 @@ static inline int of_property_read_u64(const struct device_node *np,
return -ENOSYS;
}
+static inline int of_property_match_string(struct device_node *np,
+ const char *propname,
+ const char *string)
+{
+ return -ENOSYS;
+}
+
static inline struct device_node *of_parse_phandle(struct device_node *np,
const char *phandle_name,
int index)
@@ -393,6 +400,15 @@ static inline struct device_node *of_parse_phandle(struct device_node *np,
return NULL;
}
+static inline int of_parse_phandle_with_args(struct device_node *np,
+ const char *list_name,
+ const char *cells_name,
+ int index,
+ struct of_phandle_args *out_args)
+{
+ return -ENOSYS;
+}
+
static inline int of_alias_get_id(struct device_node *np, const char *stem)
{
return -ENOSYS;
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index 7c775751392..21d076c5089 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -1,7 +1,10 @@
#ifndef __LINUX_PWM_H
#define __LINUX_PWM_H
+#include <linux/of.h>
+
struct pwm_device;
+struct seq_file;
/*
* pwm_request - request a PWM device
@@ -28,4 +31,118 @@ int pwm_enable(struct pwm_device *pwm);
*/
void pwm_disable(struct pwm_device *pwm);
+#ifdef CONFIG_PWM
+struct pwm_chip;
+
+enum {
+ PWMF_REQUESTED = 1 << 0,
+ PWMF_ENABLED = 1 << 1,
+};
+
+struct pwm_device {
+ const char *label;
+ unsigned long flags;
+ unsigned int hwpwm;
+ unsigned int pwm;
+ struct pwm_chip *chip;
+ void *chip_data;
+
+ unsigned int period; /* in nanoseconds */
+};
+
+static inline void pwm_set_period(struct pwm_device *pwm, unsigned int period)
+{
+ if (pwm)
+ pwm->period = period;
+}
+
+static inline unsigned int pwm_get_period(struct pwm_device *pwm)
+{
+ return pwm ? pwm->period : 0;
+}
+
+/**
+ * struct pwm_ops - PWM controller operations
+ * @request: optional hook for requesting a PWM
+ * @free: optional hook for freeing a PWM
+ * @config: configure duty cycles and period length for this PWM
+ * @enable: enable PWM output toggling
+ * @disable: disable PWM output toggling
+ * @dbg_show: optional routine to show contents in debugfs
+ * @owner: helps prevent removal of modules exporting active PWMs
+ */
+struct pwm_ops {
+ int (*request)(struct pwm_chip *chip,
+ struct pwm_device *pwm);
+ void (*free)(struct pwm_chip *chip,
+ struct pwm_device *pwm);
+ int (*config)(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ int duty_ns, int period_ns);
+ int (*enable)(struct pwm_chip *chip,
+ struct pwm_device *pwm);
+ void (*disable)(struct pwm_chip *chip,
+ struct pwm_device *pwm);
+#ifdef CONFIG_DEBUG_FS
+ void (*dbg_show)(struct pwm_chip *chip,
+ struct seq_file *s);
+#endif
+ struct module *owner;
+};
+
+/**
+ * struct pwm_chip - abstract a PWM controller
+ * @dev: device providing the PWMs
+ * @list: list node for internal use
+ * @ops: callbacks for this PWM controller
+ * @base: number of first PWM controlled by this chip
+ * @npwm: number of PWMs controlled by this chip
+ * @pwms: array of PWM devices allocated by the framework
+ */
+struct pwm_chip {
+ struct device *dev;
+ struct list_head list;
+ const struct pwm_ops *ops;
+ int base;
+ unsigned int npwm;
+
+ struct pwm_device *pwms;
+
+ struct pwm_device * (*of_xlate)(struct pwm_chip *pc,
+ const struct of_phandle_args *args);
+ unsigned int of_pwm_n_cells;
+};
+
+int pwm_set_chip_data(struct pwm_device *pwm, void *data);
+void *pwm_get_chip_data(struct pwm_device *pwm);
+
+int pwmchip_add(struct pwm_chip *chip);
+int pwmchip_remove(struct pwm_chip *chip);
+struct pwm_device *pwm_request_from_chip(struct pwm_chip *chip,
+ unsigned int index,
+ const char *label);
+
+struct pwm_device *pwm_get(struct device *dev, const char *consumer);
+void pwm_put(struct pwm_device *pwm);
+
+struct pwm_lookup {
+ struct list_head list;
+ const char *provider;
+ unsigned int index;
+ const char *dev_id;
+ const char *con_id;
+};
+
+#define PWM_LOOKUP(_provider, _index, _dev_id, _con_id) \
+ { \
+ .provider = _provider, \
+ .index = _index, \
+ .dev_id = _dev_id, \
+ .con_id = _con_id, \
+ }
+
+void pwm_add_table(struct pwm_lookup *table, size_t num);
+
+#endif
+
#endif /* __LINUX_PWM_H */
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 63d2df43e61..56f4a866539 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -12,6 +12,7 @@ struct platform_pwm_backlight_data {
unsigned int dft_brightness;
unsigned int lth_brightness;
unsigned int pwm_period_ns;
+ unsigned int *levels;
int (*init)(struct device *dev);
int (*notify)(struct device *dev, int brightness);
void (*notify_after)(struct device *dev, int brightness);