diff options
| -rw-r--r-- | arch/Kconfig | 11 | ||||
| -rw-r--r-- | arch/arm/kernel/ptrace.c | 7 | ||||
| -rw-r--r-- | arch/mips/kernel/ptrace.c | 2 | ||||
| -rw-r--r-- | arch/s390/kernel/ptrace.c | 2 | ||||
| -rw-r--r-- | arch/x86/include/asm/calling.h | 6 | ||||
| -rw-r--r-- | arch/x86/include/asm/ptrace.h | 5 | ||||
| -rw-r--r-- | arch/x86/kernel/entry_64.S | 51 | ||||
| -rw-r--r-- | arch/x86/kernel/ptrace.c | 165 | ||||
| -rw-r--r-- | arch/x86/kernel/vsyscall_64.c | 2 | ||||
| -rw-r--r-- | include/linux/seccomp.h | 25 | ||||
| -rw-r--r-- | kernel/seccomp.c | 252 |
11 files changed, 371 insertions, 157 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 0eae9df35b8..05d7a8a458d 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -323,6 +323,17 @@ config HAVE_ARCH_SECCOMP_FILTER results in the system call being skipped immediately. - seccomp syscall wired up + For best performance, an arch should use seccomp_phase1 and + seccomp_phase2 directly. It should call seccomp_phase1 for all + syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not + need to be called from a ptrace-safe context. It must then + call seccomp_phase2 if seccomp_phase1 returns anything other + than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP. + + As an additional optimization, an arch may provide seccomp_data + directly to seccomp_phase1; this avoids multiple calls + to the syscall_xyz helpers for every syscall. + config SECCOMP_FILTER def_bool y depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 0c27ed6f3f2..5e772a21ab9 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -933,8 +933,13 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) current_thread_info()->syscall = scno; /* Do the secure computing check first; failures should be fast. */ - if (secure_computing(scno) == -1) +#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER + if (secure_computing() == -1) return -1; +#else + /* XXX: remove this once OABI gets fixed */ + secure_computing_strict(scno); +#endif if (test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 645b3c4fcfb..f7aac5b57b4 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -770,7 +770,7 @@ asmlinkage long syscall_trace_enter(struct pt_regs *regs, long syscall) long ret = 0; user_exit(); - if (secure_computing(syscall) == -1) + if (secure_computing() == -1) return -1; if (test_thread_flag(TIF_SYSCALL_TRACE) && diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c index 5dc7ad9e2fb..bebacad4830 100644 --- a/arch/s390/kernel/ptrace.c +++ b/arch/s390/kernel/ptrace.c @@ -803,7 +803,7 @@ asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) long ret = 0; /* Do the secure computing check first. */ - if (secure_computing(regs->gprs[2])) { + if (secure_computing()) { /* seccomp failures shouldn't expose any additional code. */ ret = -1; goto out; diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h index cb4c73bfeb4..76659b67fd1 100644 --- a/arch/x86/include/asm/calling.h +++ b/arch/x86/include/asm/calling.h @@ -85,7 +85,7 @@ For 32-bit we have the following conventions - kernel is built with #define ARGOFFSET R11 #define SWFRAME ORIG_RAX - .macro SAVE_ARGS addskip=0, save_rcx=1, save_r891011=1 + .macro SAVE_ARGS addskip=0, save_rcx=1, save_r891011=1, rax_enosys=0 subq $9*8+\addskip, %rsp CFI_ADJUST_CFA_OFFSET 9*8+\addskip movq_cfi rdi, 8*8 @@ -96,7 +96,11 @@ For 32-bit we have the following conventions - kernel is built with movq_cfi rcx, 5*8 .endif + .if \rax_enosys + movq $-ENOSYS, 4*8(%rsp) + .else movq_cfi rax, 4*8 + .endif .if \save_r891011 movq_cfi r8, 3*8 diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 6205f0c434d..86fc2bb8228 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -75,6 +75,11 @@ convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs); extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code, int si_code); + +extern unsigned long syscall_trace_enter_phase1(struct pt_regs *, u32 arch); +extern long syscall_trace_enter_phase2(struct pt_regs *, u32 arch, + unsigned long phase1_result); + extern long syscall_trace_enter(struct pt_regs *); extern void syscall_trace_leave(struct pt_regs *); diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 2fac1343a90..df088bb03fb 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -404,8 +404,8 @@ GLOBAL(system_call_after_swapgs) * and short: */ ENABLE_INTERRUPTS(CLBR_NONE) - SAVE_ARGS 8,0 - movq %rax,ORIG_RAX-ARGOFFSET(%rsp) + SAVE_ARGS 8, 0, rax_enosys=1 + movq_cfi rax,(ORIG_RAX-ARGOFFSET) movq %rcx,RIP-ARGOFFSET(%rsp) CFI_REL_OFFSET rip,RIP-ARGOFFSET testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) @@ -417,7 +417,7 @@ system_call_fastpath: andl $__SYSCALL_MASK,%eax cmpl $__NR_syscall_max,%eax #endif - ja badsys + ja ret_from_sys_call /* and return regs->ax */ movq %r10,%rcx call *sys_call_table(,%rax,8) # XXX: rip relative movq %rax,RAX-ARGOFFSET(%rsp) @@ -476,28 +476,8 @@ sysret_signal: FIXUP_TOP_OF_STACK %r11, -ARGOFFSET jmp int_check_syscall_exit_work -badsys: - movq $-ENOSYS,RAX-ARGOFFSET(%rsp) - jmp ret_from_sys_call - #ifdef CONFIG_AUDITSYSCALL /* - * Fast path for syscall audit without full syscall trace. - * We just call __audit_syscall_entry() directly, and then - * jump back to the normal fast path. - */ -auditsys: - movq %r10,%r9 /* 6th arg: 4th syscall arg */ - movq %rdx,%r8 /* 5th arg: 3rd syscall arg */ - movq %rsi,%rcx /* 4th arg: 2nd syscall arg */ - movq %rdi,%rdx /* 3rd arg: 1st syscall arg */ - movq %rax,%rsi /* 2nd arg: syscall number */ - movl $AUDIT_ARCH_X86_64,%edi /* 1st arg: audit arch */ - call __audit_syscall_entry - LOAD_ARGS 0 /* reload call-clobbered registers */ - jmp system_call_fastpath - - /* * Return fast path for syscall audit. Call __audit_syscall_exit() * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT * masked off. @@ -514,18 +494,25 @@ sysret_audit: /* Do syscall tracing */ tracesys: -#ifdef CONFIG_AUDITSYSCALL - testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET) - jz auditsys -#endif + leaq -REST_SKIP(%rsp), %rdi + movq $AUDIT_ARCH_X86_64, %rsi + call syscall_trace_enter_phase1 + test %rax, %rax + jnz tracesys_phase2 /* if needed, run the slow path */ + LOAD_ARGS 0 /* else restore clobbered regs */ + jmp system_call_fastpath /* and return to the fast path */ + +tracesys_phase2: SAVE_REST - movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */ FIXUP_TOP_OF_STACK %rdi - movq %rsp,%rdi - call syscall_trace_enter + movq %rsp, %rdi + movq $AUDIT_ARCH_X86_64, %rsi + movq %rax,%rdx + call syscall_trace_enter_phase2 + /* * Reload arg registers from stack in case ptrace changed them. - * We don't reload %rax because syscall_trace_enter() returned + * We don't reload %rax because syscall_trace_entry_phase2() returned * the value it wants us to use in the table lookup. */ LOAD_ARGS ARGOFFSET, 1 @@ -536,7 +523,7 @@ tracesys: andl $__SYSCALL_MASK,%eax cmpl $__NR_syscall_max,%eax #endif - ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */ + ja int_ret_from_sys_call /* RAX(%rsp) is already set */ movq %r10,%rcx /* fixup for C */ call *sys_call_table(,%rax,8) movq %rax,RAX-ARGOFFSET(%rsp) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 678c0ada3b3..29576c24469 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1441,24 +1441,126 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, force_sig_info(SIGTRAP, &info, tsk); } - -#ifdef CONFIG_X86_32 -# define IS_IA32 1 -#elif defined CONFIG_IA32_EMULATION -# define IS_IA32 is_compat_task() -#else -# define IS_IA32 0 +static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch) +{ +#ifdef CONFIG_X86_64 + if (arch == AUDIT_ARCH_X86_64) { + audit_syscall_entry(arch, regs->orig_ax, regs->di, + regs->si, regs->dx, regs->r10); + } else #endif + { + audit_syscall_entry(arch, regs->orig_ax, regs->bx, + regs->cx, regs->dx, regs->si); + } +} /* - * We must return the syscall number to actually look up in the table. - * This can be -1L to skip running any syscall at all. + * We can return 0 to resume the syscall or anything else to go to phase + * 2. If we resume the syscall, we need to put something appropriate in + * regs->orig_ax. + * + * NB: We don't have full pt_regs here, but regs->orig_ax and regs->ax + * are fully functional. + * + * For phase 2's benefit, our return value is: + * 0: resume the syscall + * 1: go to phase 2; no seccomp phase 2 needed + * anything else: go to phase 2; pass return value to seccomp */ -long syscall_trace_enter(struct pt_regs *regs) +unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch) +{ + unsigned long ret = 0; + u32 work; + + BUG_ON(regs != task_pt_regs(current)); + + work = ACCESS_ONCE(current_thread_info()->flags) & + _TIF_WORK_SYSCALL_ENTRY; + + /* + * If TIF_NOHZ is set, we are required to call user_exit() before + * doing anything that could touch RCU. + */ + if (work & _TIF_NOHZ) { + user_exit(); + work &= ~TIF_NOHZ; + } + +#ifdef CONFIG_SECCOMP + /* + * Do seccomp first -- it should minimize exposure of other + * code, and keeping seccomp fast is probably more valuable + * than the rest of this. + */ + if (work & _TIF_SECCOMP) { + struct seccomp_data sd; + + sd.arch = arch; + sd.nr = regs->orig_ax; + sd.instruction_pointer = regs->ip; +#ifdef CONFIG_X86_64 + if (arch == AUDIT_ARCH_X86_64) { + sd.args[0] = regs->di; + sd.args[1] = regs->si; + sd.args[2] = regs->dx; + sd.args[3] = regs->r10; + sd.args[4] = regs->r8; + sd.args[5] = regs->r9; + } else +#endif + { + sd.args[0] = regs->bx; + sd.args[1] = regs->cx; + sd.args[2] = regs->dx; + sd.args[3] = regs->si; + sd.args[4] = regs->di; + sd.args[5] = regs->bp; + } + + BUILD_BUG_ON(SECCOMP_PHASE1_OK != 0); + BUILD_BUG_ON(SECCOMP_PHASE1_SKIP != 1); + + ret = seccomp_phase1(&sd); + if (ret == SECCOMP_PHASE1_SKIP) { + regs->orig_ax = -1; + ret = 0; + } else if (ret != SECCOMP_PHASE1_OK) { + return ret; /* Go directly to phase 2 */ + } + + work &= ~_TIF_SECCOMP; + } +#endif + + /* Do our best to finish without phase 2. */ + if (work == 0) + return ret; /* seccomp and/or nohz only (ret == 0 here) */ + +#ifdef CONFIG_AUDITSYSCALL + if (work == _TIF_SYSCALL_AUDIT) { + /* + * If there is no more work to be done except auditing, + * then audit in phase 1. Phase 2 always audits, so, if + * we audit here, then we can't go on to phase 2. + */ + do_audit_syscall_entry(regs, arch); + return 0; + } +#endif + + return 1; /* Something is enabled that we can't handle in phase 1 */ +} + +/* Returns the syscall nr to run (which should match regs->orig_ax). */ +long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch, + unsigned long phase1_result) { long ret = 0; + u32 work = ACCESS_ONCE(current_thread_info()->flags) & + _TIF_WORK_SYSCALL_ENTRY; - user_exit(); + BUG_ON(regs != task_pt_regs(current)); /* * If we stepped into a sysenter/syscall insn, it trapped in @@ -1467,17 +1569,21 @@ long syscall_trace_enter(struct pt_regs *regs) * do_debug() and we need to set it again to restore the user * state. If we entered on the slow path, TF was already set. */ - if (test_thread_flag(TIF_SINGLESTEP)) + if (work & _TIF_SINGLESTEP) regs->flags |= X86_EFLAGS_TF; - /* do the secure computing check first */ - if (secure_computing(regs->orig_ax)) { +#ifdef CONFIG_SECCOMP + /* + * Call seccomp_phase2 before running the other hooks so that + * they can see any changes made by a seccomp tracer. + */ + if (phase1_result > 1 && seccomp_phase2(phase1_result)) { /* seccomp failures shouldn't expose any additional code. */ - ret = -1L; - goto out; + return -1; } +#endif - if (unlikely(test_thread_flag(TIF_SYSCALL_EMU))) + if (unlikely(work & _TIF_SYSCALL_EMU)) ret = -1L; if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) && @@ -1487,23 +1593,22 @@ long syscall_trace_enter(struct pt_regs *regs) if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) trace_sys_enter(regs, regs->orig_ax); - if (IS_IA32) - audit_syscall_entry(AUDIT_ARCH_I386, - regs->orig_ax, - regs->bx, regs->cx, - regs->dx, regs->si); -#ifdef CONFIG_X86_64 - else - audit_syscall_entry(AUDIT_ARCH_X86_64, - regs->orig_ax, - regs->di, regs->si, - regs->dx, regs->r10); -#endif + do_audit_syscall_entry(regs, arch); -out: return ret ?: regs->orig_ax; } +long syscall_trace_enter(struct pt_regs *regs) +{ + u32 arch = is_ia32_task() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64; + unsigned long phase1_result = syscall_trace_enter_phase1(regs, arch); + + if (phase1_result == 0) + return regs->orig_ax; + else + return syscall_trace_enter_phase2(regs, arch, phase1_result); +} + void syscall_trace_leave(struct pt_regs *regs) { bool step; diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index e1e1e80fc6a..957779f4eb4 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -216,7 +216,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) */ regs->orig_ax = syscall_nr; regs->ax = -ENOSYS; - tmp = secure_computing(syscall_nr); + tmp = secure_computing(); if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) { warn_bad_vsyscall(KERN_DEBUG, regs, "seccomp tried to change syscall nr or ip"); diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 5d586a45a31..a19ddacdac3 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -27,19 +27,23 @@ struct seccomp { struct seccomp_filter *filter; }; -extern int __secure_computing(int); -static inline int secure_computing(int this_syscall) +#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER +extern int __secure_computing(void); +static inline int secure_computing(void) { if (unlikely(test_thread_flag(TIF_SECCOMP))) - return __secure_computing(this_syscall); + return __secure_computing(); return 0; } -/* A wrapper for architectures supporting only SECCOMP_MODE_STRICT. */ -static inline void secure_computing_strict(int this_syscall) -{ - BUG_ON(secure_computing(this_syscall) != 0); -} +#define SECCOMP_PHASE1_OK 0 +#define SECCOMP_PHASE1_SKIP 1 + +extern u32 seccomp_phase1(struct seccomp_data *sd); +int seccomp_phase2(u32 phase1_result); +#else +extern void secure_computing_strict(int this_syscall); +#endif extern long prctl_get_seccomp(void); extern long prctl_set_seccomp(unsigned long, char __user *); @@ -56,8 +60,11 @@ static inline int seccomp_mode(struct seccomp *s) struct seccomp { }; struct seccomp_filter { }; -static inline int secure_computing(int this_syscall) { return 0; } +#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER +static inline int secure_computing(void) { return 0; } +#else static inline void secure_computing_strict(int this_syscall) { return; } +#endif static inline long prctl_get_seccomp(void) { diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 84922befea8..4ef9687ac11 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -21,10 +21,11 @@ #include <linux/slab.h> #include <linux/syscalls.h> -/* #define SECCOMP_DEBUG 1 */ +#ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER +#include <asm/syscall.h> +#endif #ifdef CONFIG_SECCOMP_FILTER -#include <asm/syscall.h> #include <linux/filter.h> #include <linux/pid.h> #include <linux/ptrace.h> @@ -172,10 +173,10 @@ static int seccomp_check_filter(struct sock_filter *filter, unsigned int flen) * * Returns valid seccomp BPF response codes. */ -static u32 seccomp_run_filters(int syscall) +static u32 seccomp_run_filters(struct seccomp_data *sd) { struct seccomp_filter *f = ACCESS_ONCE(current->seccomp.filter); - struct seccomp_data sd; + struct seccomp_data sd_local; u32 ret = SECCOMP_RET_ALLOW; /* Ensure unexpected behavior doesn't result in failing open. */ @@ -185,14 +186,17 @@ static u32 seccomp_run_filters(int syscall) /* Make sure cross-thread synced filter points somewhere sane. */ smp_read_barrier_depends(); - populate_seccomp_data(&sd); + if (!sd) { + populate_seccomp_data(&sd_local); + sd = &sd_local; + } /* * All filters in the list are evaluated and the lowest BPF return * value always takes priority (ignoring the DATA). */ for (; f; f = f->prev) { - u32 cur_ret = BPF_PROG_RUN(f->prog, (void *)&sd); + u32 cur_ret = BPF_PROG_RUN(f->prog, (void *)sd); if ((cur_ret & SECCOMP_RET_ACTION) < (ret & SECCOMP_RET_ACTION)) ret = cur_ret; @@ -563,11 +567,55 @@ static int mode1_syscalls_32[] = { }; #endif -int __secure_computing(int this_syscall) +static void __secure_computing_strict(int this_syscall) +{ + int *syscall_whitelist = mode1_syscalls; +#ifdef CONFIG_COMPAT + if (is_compat_task()) + syscall_whitelist = mode1_syscalls_32; +#endif + do { + if (*syscall_whitelist == this_syscall) + return; + } while (*++syscall_whitelist); + +#ifdef SECCOMP_DEBUG + dump_stack(); +#endif + audit_seccomp(this_syscall, SIGKILL, SECCOMP_RET_KILL); + do_exit(SIGKILL); +} + +#ifndef CONFIG_HAVE_ARCH_SECCOMP_FILTER +void secure_computing_strict(int this_syscall) +{ + int mode = current->seccomp.mode; + + if (mode == 0) + return; + else if (mode == SECCOMP_MODE_STRICT) + __secure_computing_strict(this_syscall); + else + BUG(); +} +#else +int __secure_computing(void) { - int exit_sig = 0; - int *syscall; - u32 ret; + u32 phase1_result = seccomp_phase1(NULL); + + if (likely(phase1_result == SECCOMP_PHASE1_OK)) + return 0; + else if (likely(phase1_result == SECCOMP_PHASE1_SKIP)) + return -1; + else + return seccomp_phase2(phase1_result); +} + +#ifdef CONFIG_SECCOMP_FILTER +static u32 __seccomp_phase1_filter(int this_syscall, struct seccomp_data *sd) +{ + u32 filter_ret, action; + int data; /* * Make sure that any changes to mode from another thread have @@ -575,85 +623,127 @@ int __secure_computing(int this_syscall) */ rmb(); - switch (current->seccomp.mode) { - case SECCOMP_MODE_STRICT: - syscall = mode1_syscalls; -#ifdef CONFIG_COMPAT - if (is_compat_task()) - syscall = mode1_syscalls_32; + filter_ret = seccomp_run_filters(sd); + data = filter_ret & SECCOMP_RET_DATA; + action = filter_ret & SECCOMP_RET_ACTION; + + switch (action) { + case SECCOMP_RET_ERRNO: + /* Set the low-order 16-bits as a errno. */ + syscall_set_return_value(current, task_pt_regs(current), + -data, 0); + goto skip; + + case SECCOMP_RET_TRAP: + /* Show the handler the original registers. */ + syscall_rollback(current, task_pt_regs(current)); + /* Let the filter pass back 16 bits of data. */ + seccomp_send_sigsys(this_syscall, data); + goto skip; + + case SECCOMP_RET_TRACE: + return filter_ret; /* Save the rest for phase 2. */ + + case SECCOMP_RET_ALLOW: + return SECCOMP_PHASE1_OK; + + case SECCOMP_RET_KILL: + default: + audit_seccomp(this_syscall, SIGSYS, action); + do_exit(SIGSYS); + } + + unreachable(); + +skip: + audit_seccomp(this_syscall, 0, action); + return SECCOMP_PHASE1_SKIP; +} #endif - do { - if (*syscall == this_syscall) - return 0; - } while (*++syscall); - exit_sig = SIGKILL; - ret = SECCOMP_RET_KILL; - break; + +/** + * seccomp_phase1() - run fast path seccomp checks on the current syscall + * @arg sd: The seccomp_data or NULL + * + * This only reads pt_regs via the syscall_xyz helpers. The only change + * it will make to pt_regs is via syscall_set_return_value, and it will + * only do that if it returns SECCOMP_PHASE1_SKIP. + * + * If sd is provided, it will not read pt_regs at all. + * + * It may also call do_exit or force a signal; these actions must be + * safe. + * + * If it returns SECCOMP_PHASE1_OK, the syscall passes checks and should + * be processed normally. + * + * If it returns SECCOMP_PHASE1_SKIP, then the syscall should not be + * invoked. In this case, seccomp_phase1 will have set the return value + * using syscall_set_return_value. + * + * If it returns anything else, then the return value should be passed + * to seccomp_phase2 from a context in which ptrace hooks are safe. + */ +u32 seccomp_phase1(struct seccomp_data *sd) +{ + int mode = current->seccomp.mode; + int this_syscall = sd ? sd->nr : + syscall_get_nr(current, task_pt_regs(current)); + + switch (mode) { + case SECCOMP_MODE_STRICT: + __secure_computing_strict(this_syscall); /* may call do_exit */ + return SECCOMP_PHASE1_OK; #ifdef CONFIG_SECCOMP_FILTER - case SECCOMP_MODE_FILTER: { - int data; - struct pt_regs *regs = task_pt_regs(current); - ret = seccomp_run_filters(this_syscall); - data = ret & SECCOMP_RET_DATA; - ret &= SECCOMP_RET_ACTION; - switch (ret) { - case SECCOMP_RET_ERRNO: - /* Set the low-order 16-bits as a errno. */ - syscall_set_return_value(current, regs, - -data, 0); - goto skip; - case SECCOMP_RET_TRAP: - /* Show the handler the original registers. */ - syscall_rollback(current, regs); - /* Let the filter pass back 16 bits of data. */ - seccomp_send_sigsys(this_syscall, data); - goto skip; - case SECCOMP_RET_TRACE: - /* Skip these calls if there is no tracer. */ - if (!ptrace_event_enabled(current, PTRACE_EVENT_SECCOMP)) { - syscall_set_return_value(current, regs, - -ENOSYS, 0); - goto skip; - } - /* Allow the BPF to provide the event message */ - ptrace_event(PTRACE_EVENT_SECCOMP, data); - /* - * The delivery of a fatal signal during event - * notification may silently skip tracer notification. - * Terminating the task now avoids executing a system - * call that may not be intended. - */ - if (fatal_signal_pending(current)) - break; - if (syscall_get_nr(current, regs) < 0) - goto skip; /* Explicit request to skip. */ - - return 0; - case SECCOMP_RET_ALLOW: - return 0; - case SECCOMP_RET_KILL: - default: - break; - } - exit_sig = SIGSYS; - break; - } + case SECCOMP_MODE_FILTER: + return __seccomp_phase1_filter(this_syscall, sd); #endif default: BUG(); } +} -#ifdef SECCOMP_DEBUG - dump_stack(); -#endif - audit_seccomp(this_syscall, exit_sig, ret); - do_exit(exit_sig); -#ifdef CONFIG_SECCOMP_FILTER -skip: - audit_seccomp(this_syscall, exit_sig, ret); -#endif - return -1; +/** + * seccomp_phase2() - finish slow path seccomp work for the current syscall + * @phase1_result: The return value from seccomp_phase1() + * + * This must be called from a context in which ptrace hooks can be used. + * + * Returns 0 if the syscall should be processed or -1 to skip the syscall. + */ +int seccomp_phase2(u32 phase1_result) +{ + struct pt_regs *regs = task_pt_regs(current); + u32 action = phase1_result & SECCOMP_RET_ACTION; + int data = phase1_result & SECCOMP_RET_DATA; + + BUG_ON(action != SECCOMP_RET_TRACE); + + audit_seccomp(syscall_get_nr(current, regs), 0, action); + + /* Skip these calls if there is no tracer. */ + if (!ptrace_event_enabled(current, PTRACE_EVENT_SECCOMP)) { + syscall_set_return_value(current, regs, + -ENOSYS, 0); + return -1; + } + + /* Allow the BPF to provide the event message */ + ptrace_event(PTRACE_EVENT_SECCOMP, data); + /* + * The delivery of a fatal signal during event + * notification may silently skip tracer notification. + * Terminating the task now avoids executing a system + * call that may not be intended. + */ + if (fatal_signal_pending(current)) + do_exit(SIGSYS); + if (syscall_get_nr(current, regs) < 0) + return -1; /* Explicit request to skip. */ + + return 0; } +#endif /* CONFIG_HAVE_ARCH_SECCOMP_FILTER */ long prctl_get_seccomp(void) { |