diff options
101 files changed, 4134 insertions, 798 deletions
diff --git a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt index aadc9c59e2d..f57d9dd9ea8 100644 --- a/Documentation/devicetree/bindings/clock/exynos3250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos3250-clock.txt @@ -7,6 +7,8 @@ Required Properties: - compatible: should be one of the following. - "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC. + - "samsung,exynos3250-cmu-dmc" - controller compatible with + Exynos3250 SoC for Dynamic Memory Controller domain. - reg: physical base address of the controller and length of memory mapped region. @@ -20,7 +22,7 @@ All available clocks are defined as preprocessor macros in dt-bindings/clock/exynos3250.h header and can be used in device tree sources. -Example 1: An example of a clock controller node is listed below. +Example 1: Examples of clock controller nodes are listed below. cmu: clock-controller@10030000 { compatible = "samsung,exynos3250-cmu"; @@ -28,6 +30,12 @@ Example 1: An example of a clock controller node is listed below. #clock-cells = <1>; }; + cmu_dmc: clock-controller@105C0000 { + compatible = "samsung,exynos3250-cmu-dmc"; + reg = <0x105C0000 0x2000>; + #clock-cells = <1>; + }; + Example 2: UART controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. diff --git a/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt new file mode 100644 index 00000000000..d3379ff9b84 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/gpio-gate-clock.txt @@ -0,0 +1,21 @@ +Binding for simple gpio gated clock. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "gpio-gate-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- enable-gpios : GPIO reference for enabling and disabling the clock. + +Optional properties: +- clocks: Maximum of one parent clock is supported. + +Example: + clock { + compatible = "gpio-gate-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 96ce71bbd74..9c40739a661 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -9,13 +9,21 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled Following properties should be presend in main device node of the MFD chip. Required properties: -- #clock-cells: simple one-cell clock specifier format is used, where the - only cell is used as an index of the clock inside the provider. Following - indices are allowed: + +- #clock-cells: from common clock binding; shall be set to 1. + +Optional properties: +- clock-output-names: From common clock binding. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: - 0: 32khz_ap clock, - 1: 32khz_cp clock, - 2: 32khz_pmic clock. +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h +header and can be used in device tree sources. + Example: Node of the MFD chip max77686: max77686@09 { @@ -34,5 +42,5 @@ Example: Clock consumer node compatible = "bar,foo"; /* ... */ clock-names = "my-clock"; - clocks = <&max77686 2>; + clocks = <&max77686 MAX77686_CLK_PMIC>; }; diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt new file mode 100644 index 00000000000..c6dc7835f06 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt @@ -0,0 +1,44 @@ +Binding for Maxim MAX77802 32k clock generator block + +This is a part of device tree bindings of MAX77802 multi-function device. +More information can be found in bindings/mfd/max77802.txt file. + +The MAX77802 contains two 32.768khz clock outputs that can be controlled +(gated/ungated) over I2C. + +Following properties should be present in main device node of the MFD chip. + +Required properties: +- #clock-cells: From common clock binding; shall be set to 1. + +Optional properties: +- clock-output-names: From common clock binding. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. Following indices are allowed: + - 0: 32khz_ap clock, + - 1: 32khz_cp clock. + +Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77802.h +header and can be used in device tree sources. + +Example: Node of the MFD chip + + max77802: max77802@09 { + compatible = "maxim,max77802"; + interrupt-parent = <&wakeup_eint>; + interrupts = <26 0>; + reg = <0x09>; + #clock-cells = <1>; + + /* ... */ + }; + +Example: Clock consumer node + + foo@0 { + compatible = "bar,foo"; + /* ... */ + clock-names = "my-clock"; + clocks = <&max77802 MAX77802_CLK_32K_AP>; + }; diff --git a/Documentation/devicetree/bindings/clock/pxa-clock.txt b/Documentation/devicetree/bindings/clock/pxa-clock.txt new file mode 100644 index 00000000000..4b4a9024bd9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/pxa-clock.txt @@ -0,0 +1,16 @@ +* Clock bindings for Marvell PXA chips + +Required properties: +- compatible: Should be "marvell,pxa-clocks" +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell (see include/.../pxa-clock.h). + +Examples: + +pxa2xx_clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa-clocks"; + #clock-cells = <1>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt index 8f1424f0fa4..a5f52238c80 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -15,6 +15,7 @@ Required Properties: - "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,r8a7794-mstp-clocks" for R8A7794 (R-Car E2) MSTP gate clocks - "renesas,sh73a0-mstp-clocks" for SH73A0 (SH-MobileAG5) MSTP gate clocks - "renesas,cpg-mstp-clock" for generic MSTP gate clocks - reg: Base address and length of the I/O mapped registers used by the MSTP diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt index 7b41c2fe54d..e6ad35b894f 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Must be one of - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG - reg: Base address and length of the memory resource used by the CPG diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index d3a5c3c6d67..ed116df9c3e 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -46,7 +46,11 @@ Required properties: "allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31 "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31 "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23 + "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13 + "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10 + "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10 "allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks + "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23 "allwinner,sun7i-a20-out-clk" - for the external output clocks "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31 "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 04e9f5505fa..b62bdcb1eb3 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -605,11 +605,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. See Documentation/s390/CommonIO for details. clk_ignore_unused [CLK] - Keep all clocks already enabled by bootloader on, - even if no driver has claimed them. This is useful - for debug and development, but should not be - needed on a platform with proper driver support. - For more information, see Documentation/clk.txt. + Prevents the clock framework from automatically gating + clocks that have not been explicitly enabled by a Linux + device driver but are enabled in hardware at reset or + by the bootloader/firmware. Note that this does not + force such clocks to be always-on nor does it reserve + those clocks in any way. This parameter is useful for + debug and development, but should not be needed on a + platform with proper driver support. For more + information, see Documentation/clk.txt. clock= [BUGS=X86-32, HW] gettimeofday clocksource override. [Deprecated] diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 8831c48c2bc..693a3275606 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -169,6 +169,12 @@ #clock-cells = <1>; }; + cmu_dmc: clock-controller@105C0000 { + compatible = "samsung,exynos3250-cmu-dmc"; + reg = <0x105C0000 0x2000>; + #clock-cells = <1>; + }; + rtc: rtc@10070000 { compatible = "samsung,exynos3250-rtc"; reg = <0x10070000 0x100>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index a7054694598..80fc5d7e9ef 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -1,5 +1,6 @@ /* The pxa3xx skeleton simply augments the 2xx version */ -/include/ "pxa2xx.dtsi" +#include "pxa2xx.dtsi" +#include "dt-bindings/clock/pxa2xx-clock.h" / { model = "Marvell PXA27x familiy SoC"; @@ -35,4 +36,21 @@ #pwm-cells = <1>; }; }; + + clocks { + /* + * The muxing of external clocks/internal dividers for osc* clock + * sources has been hidden under the carpet by now. + */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pxa2xx_clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa-clocks"; + #clock-cells = <1>; + status = "okay"; + }; + }; + }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index d73a2287b37..531272c0e52 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -287,7 +287,7 @@ mbus_clk: clk@01c2015c { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + compatible = "allwinner,sun5i-a13-mbus-clk"; reg = <0x01c2015c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "mbus"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c4b5d7825b9..b131068f4f3 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -285,7 +285,7 @@ mbus_clk: clk@01c2015c { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + compatible = "allwinner,sun5i-a13-mbus-clk"; reg = <0x01c2015c 0x4>; clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "mbus"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index a96b9946506..82097c905c4 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -382,7 +382,7 @@ mbus_clk: clk@01c2015c { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; + compatible = "allwinner,sun5i-a13-mbus-clk"; reg = <0x01c2015c 0x4>; clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; clock-output-names = "mbus"; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index b8ad045bcb8..03cbb16898a 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -723,8 +723,16 @@ int __init omap_clk_init(void) ti_clk_init_features(); ret = of_prcm_init(); - if (!ret) - ret = omap_clk_soc_init(); + if (ret) + return ret; + + of_clk_init(NULL); + + ti_dt_clk_init_retry_clks(); + + ti_dt_clockdomains_setup(); + + ret = omap_clk_soc_init(); return ret; } diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 74054b81360..ee2b5222eac 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -525,8 +525,6 @@ int __init of_prcm_init(void) memmap_index++; } - ti_dt_clockdomains_setup(); - return 0; } diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h index ee6ced1cea7..f1dd62946b3 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h @@ -143,6 +143,16 @@ #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ +#define CCCR_CPDIS_BIT (31) +#define CCCR_PPDIS_BIT (30) +#define CCCR_LCD_26_BIT (27) +#define CCCR_A_BIT (25) + +#define CCSR_N2_MASK CCCR_N_MASK +#define CCSR_M_MASK CCCR_M_MASK +#define CCSR_L_MASK CCCR_L_MASK +#define CCSR_N2_SHIFT 7 + #define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ #define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ #define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 84e0590e31d..455fd17d938 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -32,12 +32,23 @@ config COMMON_CLK_WM831X source "drivers/clk/versatile/Kconfig" +config COMMON_CLK_MAX_GEN + bool + config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" depends on MFD_MAX77686 + select COMMON_CLK_MAX_GEN ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config COMMON_CLK_MAX77802 + tristate "Clock driver for Maxim 77802 PMIC" + depends on MFD_MAX77686 + select COMMON_CLK_MAX_GEN + ---help--- + This driver supports Maxim 77802 crystal oscillator clock. + config COMMON_CLK_RK808 tristate "Clock driver for RK808" depends on MFD_RK808 @@ -118,6 +129,11 @@ config COMMON_CLK_PALMAS This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO using common clock framework. +config COMMON_CLK_PXA + def_bool COMMON_CLK && ARCH_PXA + ---help--- + Sypport for the Marvell PXA SoC. + source "drivers/clk/qcom/Kconfig" endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 99f53d5f876..d5fba5bc6e1 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-gate.o obj-$(CONFIG_COMMON_CLK) += clk-mux.o obj-$(CONFIG_COMMON_CLK) += clk-composite.o obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o +obj-$(CONFIG_COMMON_CLK) += clk-gpio-gate.o ifeq ($(CONFIG_OF), y) obj-$(CONFIG_COMMON_CLK) += clk-conf.o endif @@ -22,7 +23,9 @@ obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o +obj-$(CONFIG_COMMON_CLK_MAX_GEN) += clk-max-gen.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_COMMON_CLK_MAX77802) += clk-max77802.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o @@ -49,6 +52,7 @@ obj-$(CONFIG_ARCH_MMP) += mmp/ endif obj-$(CONFIG_PLAT_ORION) += mvebu/ obj-$(CONFIG_ARCH_MXS) += mxs/ +obj-$(CONFIG_COMMON_CLK_PXA) += pxa/ obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/ obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/ diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c index cf6ed023504..6ec79dbc084 100644 --- a/drivers/clk/at91/clk-pll.c +++ b/drivers/clk/at91/clk-pll.c @@ -15,6 +15,7 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/io.h> +#include <linux/kernel.h> #include <linux/wait.h> #include <linux/sched.h> #include <linux/interrupt.h> @@ -29,9 +30,12 @@ #define PLL_DIV(reg) ((reg) & PLL_DIV_MASK) #define PLL_MUL(reg, layout) (((reg) >> (layout)->mul_shift) & \ (layout)->mul_mask) +#define PLL_MUL_MIN 2 +#define PLL_MUL_MASK(layout) ((layout)->mul_mask) +#define PLL_MUL_MAX(layout) (PLL_MUL_MASK(layout) + 1) #define PLL_ICPR_SHIFT(id) ((id) * 16) #define PLL_ICPR_MASK(id) (0xffff << PLL_ICPR_SHIFT(id)) -#define PLL_MAX_COUNT 0x3ff +#define PLL_MAX_COUNT 0x3f #define PLL_COUNT_SHIFT 8 #define PLL_OUT_SHIFT 14 #define PLL_MAX_ID 1 @@ -147,115 +151,113 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pll *pll = to_clk_pll(hw); - const struct clk_pll_layout *layout = pll->layout; - struct at91_pmc *pmc = pll->pmc; - int offset = PLL_REG(pll->id); - u32 tmp = pmc_read(pmc, offset) & layout->pllr_mask; - u8 div = PLL_DIV(tmp); - u16 mul = PLL_MUL(tmp, layout); - if (!div || !mul) + + if (!pll->div || !pll->mul) return 0; - return (parent_rate * (mul + 1)) / div; + return (parent_rate / pll->div) * (pll->mul + 1); } static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate, unsigned long parent_rate, u32 *div, u32 *mul, u32 *index) { - unsigned long maxrate; - unsigned long minrate; - unsigned long divrate; - unsigned long bestdiv = 1; - unsigned long bestmul; - unsigned long tmpdiv; - unsigned long roundup; - unsigned long rounddown; - unsigned long remainder; - unsigned long bestremainder; - unsigned long maxmul; - unsigned long maxdiv; - unsigned long mindiv; - int i = 0; const struct clk_pll_layout *layout = pll->layout; const struct clk_pll_characteristics *characteristics = pll->characteristics; + unsigned long bestremainder = ULONG_MAX; + unsigned long maxdiv, mindiv, tmpdiv; + long bestrate = -ERANGE; + unsigned long bestdiv; + unsigned long bestmul; + int i = 0; - /* Minimum divider = 1 */ - /* Maximum multiplier = max_mul */ - maxmul = layout->mul_mask + 1; - maxrate = (parent_rate * maxmul) / 1; - - /* Maximum divider = max_div */ - /* Minimum multiplier = 2 */ - maxdiv = PLL_DIV_MAX; - minrate = (parent_rate * 2) / maxdiv; - + /* Check if parent_rate is a valid input rate */ if (parent_rate < characteristics->input.min || - parent_rate < characteristics->input.max) - return -ERANGE; - - if (parent_rate < minrate || parent_rate > maxrate) + parent_rate > characteristics->input.max) return -ERANGE; - for (i = 0; i < characteristics->num_output; i++) { - if (parent_rate >= characteristics->output[i].min && - parent_rate <= characteristics->output[i].max) - break; - } - - if (i >= characteristics->num_output) - return -ERANGE; - - bestmul = rate / parent_rate; - rounddown = parent_rate % rate; - roundup = rate - rounddown; - bestremainder = roundup < rounddown ? roundup : rounddown; - - if (!bestremainder) { - if (div) - *div = bestdiv; - if (mul) - *mul = bestmul; - if (index) - *index = i; - return rate; - } - - maxdiv = 255 / (bestmul + 1); - if (parent_rate / maxdiv < characteristics->input.min) - maxdiv = parent_rate / characteristics->input.min; - mindiv = parent_rate / characteristics->input.max; - if (parent_rate % characteristics->input.max) - mindiv++; - - for (tmpdiv = mindiv; tmpdiv < maxdiv; tmpdiv++) { - divrate = parent_rate / tmpdiv; - - rounddown = rate % divrate; - roundup = divrate - rounddown; - remainder = roundup < rounddown ? roundup : rounddown; - + /* + * Calculate minimum divider based on the minimum multiplier, the + * parent_rate and the requested rate. + * Should always be 2 according to the input and output characteristics + * of the PLL blocks. + */ + mindiv = (parent_rate * PLL_MUL_MIN) / rate; + if (!mindiv) + mindiv = 1; + + /* + * Calculate the maximum divider which is limited by PLL register + * layout (limited by the MUL or DIV field size). + */ + maxdiv = DIV_ROUND_UP(parent_rate * PLL_MUL_MAX(layout), rate); + if (maxdiv > PLL_DIV_MAX) + maxdiv = PLL_DIV_MAX; + + /* + * Iterate over the acceptable divider values to find the best + * divider/multiplier pair (the one that generates the closest + * rate to the requested one). + */ + for (tmpdiv = mindiv; tmpdiv <= maxdiv; tmpdiv++) { + unsigned long remainder; + unsigned long tmprate; + unsigned long tmpmul; + + /* + * Calculate the multiplier associated with the current + * divider that provide the closest rate to the requested one. + */ + tmpmul = DIV_ROUND_CLOSEST(rate, parent_rate / tmpdiv); + tmprate = (parent_rate / tmpdiv) * tmpmul; + if (tmprate > rate) + remainder = tmprate - rate; + else + remainder = rate - tmprate; + + /* + * Compare the remainder with the best remainder found until + * now and elect a new best multiplier/divider pair if the + * current remainder is smaller than the best one. + */ if (remainder < bestremainder) { bestremainder = remainder; - bestmul = rate / divrate; bestdiv = tmpdiv; + bestmul = tmpmul; + bestrate = tmprate; } + /* + * We've found a perfect match! + * Stop searching now and use this multiplier/divider pair. + */ if (!remainder) break; } - rate = (parent_rate / bestdiv) * bestmul; + /* We haven't found any multiplier/divider pair => return -ERANGE */ + if (bestrate < 0) + return bestrate; + + /* Check if bestrate is a valid output rate */ + for (i = 0; i < characteristics->num_output; i++) { + if (bestrate >= characteristics->output[i].min && + bestrate <= characteristics->output[i].max) + break; + } + + if (i >= characteristics->num_output) + return -ERANGE; if (div) *div = bestdiv; if (mul) - *mul = bestmul; + *mul = bestmul - 1; if (index) *index = i; - return rate; + return bestrate; } static long clk_pll_round_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c index 7d1d26a4bd0..24b5b020753 100644 --- a/drivers/clk/at91/clk-usb.c +++ b/drivers/clk/at91/clk-usb.c @@ -238,16 +238,22 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *parent_rate) { struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw); + struct clk *parent = __clk_get_parent(hw->clk); unsigned long bestrate = 0; int bestdiff = -1; unsigned long tmprate; int tmpdiff; int i = 0; - for (i = 0; i < 4; i++) { + for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) { + unsigned long tmp_parent_rate; + if (!usb->divisors[i]) continue; - tmprate = *parent_rate / usb->divisors[i]; + + tmp_parent_rate = rate * usb->divisors[i]; + tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate); + tmprate = tmp_parent_rate / usb->divisors[i]; if (tmprate < rate) tmpdiff = rate - tmprate; else @@ -256,6 +262,7 @@ static long at91rm9200_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate, if (bestdiff < 0 || bestdiff > tmpdiff) { bestrate = tmprate; bestdiff = tmpdiff; + *parent_rate = tmp_parent_rate; } if (!bestdiff) @@ -272,10 +279,13 @@ static int at91rm9200_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate, int i; struct at91rm9200_clk_usb *usb = to_at91rm9200_clk_usb(hw); struct at91_pmc *pmc = usb->pmc; - unsigned long div = parent_rate / rate; + unsigned long div; - if (parent_rate % rate) + if (!rate || parent_rate % rate) return -EINVAL; + + div = parent_rate / rate; + for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) { if (usb->divisors[i] == div) { tmp = pmc_read(pmc, AT91_CKGR_PLLBR) & @@ -311,7 +321,7 @@ at91rm9200_clk_register_usb(struct at91_pmc *pmc, const char *name, init.ops = &at91rm9200_usb_ops; init.parent_names = &parent_name; init.num_parents = 1; - init.flags = 0; + init.flags = CLK_SET_RATE_PARENT; usb->hw.init = &init; usb->pmc = pmc; diff --git a/drivers/clk/clk-axi-clkgen.c b/drivers/clk/clk-axi-clkgen.c index 1127ee46b80..e619285c6de 100644 --- a/drivers/clk/clk-axi-clkgen.c +++ b/drivers/clk/clk-axi-clkgen.c @@ -544,7 +544,6 @@ static int axi_clkgen_remove(struct platform_device *pdev) static struct platform_driver axi_clkgen_driver = { .driver = { .name = "adi-axi-clkgen", - .owner = THIS_MODULE, .of_match_table = axi_clkgen_ids, }, .probe = axi_clkgen_probe, diff --git a/drivers/clk/clk-fractional-divider.c b/drivers/clk/clk-fractional-divider.c index ede685ca0d2..82a59d0086c 100644 --- a/drivers/clk/clk-fractional-divider.c +++ b/drivers/clk/clk-fractional-divider.c @@ -36,7 +36,7 @@ static unsigned long clk_fd_recalc_rate(struct clk_hw *hw, m = (val & fd->mmask) >> fd->mshift; n = (val & fd->nmask) >> fd->nshift; - ret = parent_rate * m; + ret = (u64)parent_rate * m; do_div(ret, n); return ret; diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c index 4a58c55255b..51fd87fb7ba 100644 --- a/drivers/clk/clk-gate.c +++ b/drivers/clk/clk-gate.c @@ -45,7 +45,7 @@ static void clk_gate_endisable(struct clk_hw *hw, int enable) { struct clk_gate *gate = to_clk_gate(hw); int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0; - unsigned long flags = 0; + unsigned long uninitialized_var(flags); u32 reg; set ^= enable; diff --git a/drivers/clk/clk-gpio-gate.c b/drivers/clk/clk-gpio-gate.c new file mode 100644 index 00000000000..08e43224fd5 --- /dev/null +++ b/drivers/clk/clk-gpio-gate.c @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2013 - 2014 Texas Instruments Incorporated - http://www.ti.com + * Author: Jyri Sarha <jsarha@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Gpio gated clock implementation + */ + +#include <linux/clk-provider.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/gpio/consumer.h> +#include <linux/of_gpio.h> +#include <linux/err.h> +#include <linux/device.h> + +/** + * DOC: basic gpio gated clock which can be enabled and disabled + * with gpio output + * Traits of this clock: + * prepare - clk_(un)prepare only ensures parent is (un)prepared + * enable - clk_enable and clk_disable are functional & control gpio + * rate - inherits rate from parent. No clk_set_rate support + * parent - fixed parent. No clk_set_parent support + */ + +#define to_clk_gpio(_hw) container_of(_hw, struct clk_gpio, hw) + +static int clk_gpio_gate_enable(struct clk_hw *hw) +{ + struct clk_gpio *clk = to_clk_gpio(hw); + + gpiod_set_value(clk->gpiod, 1); + + return 0; +} + +static void clk_gpio_gate_disable(struct clk_hw *hw) +{ + struct clk_gpio *clk = to_clk_gpio(hw); + + gpiod_set_value(clk->gpiod, 0); +} + +static int clk_gpio_gate_is_enabled(struct clk_hw *hw) +{ + struct clk_gpio *clk = to_clk_gpio(hw); + + return gpiod_get_value(clk->gpiod); +} + +const struct clk_ops clk_gpio_gate_ops = { + .enable = clk_gpio_gate_enable, + .disable = clk_gpio_gate_disable, + .is_enabled = clk_gpio_gate_is_enabled, +}; +EXPORT_SYMBOL_GPL(clk_gpio_gate_ops); + +/** + * clk_register_gpio - register a gpip clock with the clock framework + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_name: name of this clock's parent + * @gpiod: gpio descriptor to gate this clock + */ +struct clk *clk_register_gpio_gate(struct device *dev, const char *name, + const char *parent_name, struct gpio_desc *gpiod, + unsigned long flags) +{ + struct clk_gpio *clk_gpio = NULL; + struct clk *clk = ERR_PTR(-EINVAL); + struct clk_init_data init = { NULL }; + unsigned long gpio_flags; + int err; + + if (gpiod_is_active_low(gpiod)) + gpio_flags = GPIOF_OUT_INIT_HIGH; + else + gpio_flags = GPIOF_OUT_INIT_LOW; + + if (dev) + err = devm_gpio_request_one(dev, desc_to_gpio(gpiod), + gpio_flags, name); + else + err = gpio_request_one(desc_to_gpio(gpiod), gpio_flags, name); + + if (err) { + pr_err("%s: %s: Error requesting clock control gpio %u\n", + __func__, name, desc_to_gpio(gpiod)); + return ERR_PTR(err); + } + + if (dev) + clk_gpio = devm_kzalloc(dev, sizeof(struct clk_gpio), + GFP_KERNEL); + else + clk_gpio = kzalloc(sizeof(struct clk_gpio), GFP_KERNEL); + + if (!clk_gpio) { + clk = ERR_PTR(-ENOMEM); + goto clk_register_gpio_gate_err; + } + + init.name = name; + init.ops = &clk_gpio_gate_ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + clk_gpio->gpiod = gpiod; + clk_gpio->hw.init = &init; + + clk = clk_register(dev, &clk_gpio->hw); + + if (!IS_ERR(clk)) + return clk; + + if (!dev) + kfree(clk_gpio); + +clk_register_gpio_gate_err: + gpiod_put(gpiod); + + return clk; +} +EXPORT_SYMBOL_GPL(clk_register_gpio_gate); + +#ifdef CONFIG_OF +/** + * The clk_register_gpio_gate has to be delayed, because the EPROBE_DEFER + * can not be handled properly at of_clk_init() call time. + */ + +struct clk_gpio_gate_delayed_register_data { + struct device_node *node; + struct mutex lock; + struct clk *clk; +}; + +static struct clk *of_clk_gpio_gate_delayed_register_get( + struct of_phandle_args *clkspec, + void *_data) +{ + struct clk_gpio_gate_delayed_register_data *data = _data; + struct clk *clk; + const char *clk_name = data->node->name; + const char *parent_name; + struct gpio_desc *gpiod; + int gpio; + + mutex_lock(&data->lock); + + if (data->clk) { + mutex_unlock(&data->lock); + return data->clk; + } + + gpio = of_get_named_gpio_flags(data->node, "enable-gpios", 0, NULL); + if (gpio < 0) { + mutex_unlock(&data->lock); + if (gpio != -EPROBE_DEFER) + pr_err("%s: %s: Can't get 'enable-gpios' DT property\n", + __func__, clk_name); + return ERR_PTR(gpio); + } + gpiod = gpio_to_desc(gpio); + + parent_name = of_clk_get_parent_name(data->node, 0); + + clk = clk_register_gpio_gate(NULL, clk_name, parent_name, gpiod, 0); + if (IS_ERR(clk)) { + mutex_unlock(&data->lock); + return clk; + } + + data->clk = clk; + mutex_unlock(&data->lock); + + return clk; +} + +/** + * of_gpio_gate_clk_setup() - Setup function for gpio controlled clock + */ +void __init of_gpio_gate_clk_setup(struct device_node *node) +{ + struct clk_gpio_gate_delayed_register_data *data; + + data = kzalloc(sizeof(struct clk_gpio_gate_delayed_register_data), + GFP_KERNEL); + if (!data) + return; + + data->node = node; + mutex_init(&data->lock); + + of_clk_add_provider(node, of_clk_gpio_gate_delayed_register_get, data); +} +EXPORT_SYMBOL_GPL(of_gpio_gate_clk_setup); +CLK_OF_DECLARE(gpio_gate_clk, "gpio-gate-clock", of_gpio_gate_clk_setup); +#endif diff --git a/drivers/clk/clk-max-gen.c b/drivers/clk/clk-max-gen.c new file mode 100644 index 00000000000..6505049d50f --- /dev/null +++ b/drivers/clk/clk-max-gen.c @@ -0,0 +1,192 @@ +/* + * clk-max-gen.c - Generic clock driver for Maxim PMICs clocks + * + * Copyright (C) 2014 Google, Inc + * + * Copyright (C) 2012 Samsung Electornics + * Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on clk-max77686.c + * + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/clkdev.h> +#include <linux/of.h> +#include <linux/export.h> + +struct max_gen_clk { + struct regmap *regmap; + u32 mask; + u32 reg; + struct clk_hw hw; +}; + +static struct max_gen_clk *to_max_gen_clk(struct clk_hw *hw) +{ + return container_of(hw, struct max_gen_clk, hw); +} + +static int max_gen_clk_prepare(struct clk_hw *hw) +{ + struct max_gen_clk *max_gen = to_max_gen_clk(hw); + + return regmap_update_bits(max_gen->regmap, max_gen->reg, + max_gen->mask, max_gen->mask); +} + +static void max_gen_clk_unprepare(struct clk_hw *hw) +{ + struct max_gen_clk *max_gen = to_max_gen_clk(hw); + + regmap_update_bits(max_gen->regmap, max_gen->reg, + max_gen->mask, ~max_gen->mask); +} + +static int max_gen_clk_is_prepared(struct clk_hw *hw) +{ + struct max_gen_clk *max_gen = to_max_gen_clk(hw); + int ret; + u32 val; + + ret = regmap_read(max_gen->regmap, max_gen->reg, &val); + + if (ret < 0) + return -EINVAL; + + return val & max_gen->mask; +} + +static unsigned long max_gen_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return 32768; +} + +struct clk_ops max_gen_clk_ops = { + .prepare = max_gen_clk_prepare, + .unprepare = max_gen_clk_unprepare, + .is_prepared = max_gen_clk_is_prepared, + .recalc_rate = max_gen_recalc_rate, +}; +EXPORT_SYMBOL_GPL(max_gen_clk_ops); + +static struct clk *max_gen_clk_register(struct device *dev, + struct max_gen_clk *max_gen) +{ + struct clk *clk; + struct clk_hw *hw = &max_gen->hw; + int ret; + + clk = devm_clk_register(dev, hw); + if (IS_ERR(clk)) + return clk; + + ret = clk_register_clkdev(clk, hw->init->name, NULL); + + if (ret) + return ERR_PTR(ret); + + return clk; +} + +int max_gen_clk_probe(struct platform_device *pdev, struct regmap *regmap, + u32 reg, struct clk_init_data *clks_init, int num_init) +{ + int i, ret; + struct max_gen_clk *max_gen_clks; + struct clk **clocks; + struct device *dev = pdev->dev.parent; + const char *clk_name; + struct clk_init_data *init; + + clocks = devm_kzalloc(dev, sizeof(struct clk *) * num_init, GFP_KERNEL); + if (!clocks) + return -ENOMEM; + + max_gen_clks = devm_kzalloc(dev, sizeof(struct max_gen_clk) + * num_init, GFP_KERNEL); + if (!max_gen_clks) + return -ENOMEM; + + for (i = 0; i < num_init; i++) { + max_gen_clks[i].regmap = regmap; + max_gen_clks[i].mask = 1 << i; + max_gen_clks[i].reg = reg; + + init = devm_kzalloc(dev, sizeof(*init), GFP_KERNEL); + if (!init) + return -ENOMEM; + + if (dev->of_node && + !of_property_read_string_index(dev->of_node, + "clock-output-names", + i, &clk_name)) + init->name = clk_name; + else + init->name = clks_init[i].name; + + init->ops = clks_init[i].ops; + init->flags = clks_init[i].flags; + + max_gen_clks[i].hw.init = init; + + clocks[i] = max_gen_clk_register(dev, &max_gen_clks[i]); + if (IS_ERR(clocks[i])) { + ret = PTR_ERR(clocks[i]); + dev_err(dev, "failed to register %s\n", + max_gen_clks[i].hw.init->name); + return ret; + } + } + + platform_set_drvdata(pdev, clocks); + + if (dev->of_node) { + struct clk_onecell_data *of_data; + + of_data = devm_kzalloc(dev, sizeof(*of_data), GFP_KERNEL); + if (!of_data) + return -ENOMEM; + + of_data->clks = clocks; + of_data->clk_num = num_init; + ret = of_clk_add_provider(dev->of_node, of_clk_src_onecell_get, + of_data); + + if (ret) { + dev_err(dev, "failed to register OF clock provider\n"); + return ret; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(max_gen_clk_probe); + +int max_gen_clk_remove(struct platform_device *pdev, int num_init) +{ + struct device *dev = pdev->dev.parent; + + if (dev->of_node) + of_clk_del_provider(dev->of_node); + + return 0; +} +EXPORT_SYMBOL_GPL(max_gen_clk_remove); diff --git a/drivers/clk/clk-max-gen.h b/drivers/clk/clk-max-gen.h new file mode 100644 index 00000000000..997e86fc3f4 --- /dev/null +++ b/drivers/clk/clk-max-gen.h @@ -0,0 +1,32 @@ +/* + * clk-max-gen.h - Generic clock driver for Maxim PMICs clocks + * + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __CLK_MAX_GEN_H__ +#define __CLK_MAX_GEN_H__ + +#include <linux/types.h> +#include <linux/device.h> +#include <linux/clkdev.h> +#include <linux/regmap.h> +#include <linux/platform_device.h> + +int max_gen_clk_probe(struct platform_device *pdev, struct regmap *regmap, + u32 reg, struct clk_init_data *clks_init, int num_init); +int max_gen_clk_remove(struct platform_device *pdev, int num_init); +extern struct clk_ops max_gen_clk_ops; + +#endif /* __CLK_MAX_GEN_H__ */ diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index 3d7e8dd8fd5..86cdb3a2862 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -30,193 +30,38 @@ #include <linux/mutex.h> #include <linux/clkdev.h> -enum { - MAX77686_CLK_AP = 0, - MAX77686_CLK_CP, - MAX77686_CLK_PMIC, - MAX77686_CLKS_NUM, -}; - -struct max77686_clk { - struct max77686_dev *iodev; - u32 mask; - struct clk_hw hw; - struct clk_lookup *lookup; -}; - -static struct max77686_clk *to_max77686_clk(struct clk_hw *hw) -{ - return container_of(hw, struct max77686_clk, hw); -} - -static int max77686_clk_prepare(struct clk_hw *hw) -{ - struct max77686_clk *max77686 = to_max77686_clk(hw); - - return regmap_update_bits(max77686->iodev->regmap, - MAX77686_REG_32KHZ, max77686->mask, - max77686->mask); -} - -static void max77686_clk_unprepare(struct clk_hw *hw) -{ - struct max77686_clk *max77686 = to_max77686_clk(hw); - - regmap_update_bits(max77686->iodev->regmap, - MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask); -} - -static int max77686_clk_is_prepared(struct clk_hw *hw) -{ - struct max77686_clk *max77686 = to_max77686_clk(hw); - int ret; - u32 val; - - ret = regmap_read(max77686->iodev->regmap, - MAX77686_REG_32KHZ, &val); - - if (ret < 0) - return -EINVAL; - - return val & max77686->mask; -} - -static unsigned long max77686_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - return 32768; -} - -static struct clk_ops max77686_clk_ops = { - .prepare = max77686_clk_prepare, - .unprepare = max77686_clk_unprepare, - .is_prepared = max77686_clk_is_prepared, - .recalc_rate = max77686_recalc_rate, -}; +#include <dt-bindings/clock/maxim,max77686.h> +#include "clk-max-gen.h" static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = { [MAX77686_CLK_AP] = { .name = "32khz_ap", - .ops = &max77686_clk_ops, + .ops = &max_gen_clk_ops, .flags = CLK_IS_ROOT, }, [MAX77686_CLK_CP] = { .name = "32khz_cp", - .ops = &max77686_clk_ops, + .ops = &max_gen_clk_ops, .flags = CLK_IS_ROOT, }, [MAX77686_CLK_PMIC] = { .name = "32khz_pmic", - .ops = &max77686_clk_ops, + .ops = &max_gen_clk_ops, .flags = CLK_IS_ROOT, }, }; -static struct clk *max77686_clk_register(struct device *dev, - struct max77686_clk *max77686) -{ - struct clk *clk; - struct clk_hw *hw = &max77686->hw; - - clk = clk_register(dev, hw); - if (IS_ERR(clk)) - return clk; - - max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL); - if (!max77686->lookup) - return ERR_PTR(-ENOMEM); - - max77686->lookup->con_id = hw->init->name; - max77686->lookup->clk = clk; - - clkdev_add(max77686->lookup); - - return clk; -} - static int max77686_clk_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct max77686_clk *max77686_clks[MAX77686_CLKS_NUM]; - struct clk **clocks; - int i, ret; - - clocks = devm_kzalloc(&pdev->dev, sizeof(struct clk *) - * MAX77686_CLKS_NUM, GFP_KERNEL); - if (!clocks) - return -ENOMEM; - - for (i = 0; i < MAX77686_CLKS_NUM; i++) { - max77686_clks[i] = devm_kzalloc(&pdev->dev, - sizeof(struct max77686_clk), GFP_KERNEL); - if (!max77686_clks[i]) - return -ENOMEM; - } - - for (i = 0; i < MAX77686_CLKS_NUM; i++) { - max77686_clks[i]->iodev = iodev; - max77686_clks[i]->mask = 1 << i; - max77686_clks[i]->hw.init = &max77686_clks_init[i]; - - clocks[i] = max77686_clk_register(&pdev->dev, max77686_clks[i]); - if (IS_ERR(clocks[i])) { - ret = PTR_ERR(clocks[i]); - dev_err(&pdev->dev, "failed to register %s\n", - max77686_clks[i]->hw.init->name); - goto err_clocks; - } - } - - platform_set_drvdata(pdev, clocks); - - if (iodev->dev->of_node) { - struct clk_onecell_data *of_data; - of_data = devm_kzalloc(&pdev->dev, - sizeof(*of_data), GFP_KERNEL); - if (!of_data) { - ret = -ENOMEM; - goto err_clocks; - } - - of_data->clks = clocks; - of_data->clk_num = MAX77686_CLKS_NUM; - ret = of_clk_add_provider(iodev->dev->of_node, - of_clk_src_onecell_get, of_data); - if (ret) { - dev_err(&pdev->dev, "failed to register OF clock provider\n"); - goto err_clocks; - } - } - - return 0; - -err_clocks: - for (--i; i >= 0; --i) { - clkdev_drop(max77686_clks[i]->lookup); - clk_unregister(max77686_clks[i]->hw.clk); - } - - return ret; + return max_gen_clk_probe(pdev, iodev->regmap, MAX77686_REG_32KHZ, + max77686_clks_init, MAX77686_CLKS_NUM); } static int max77686_clk_remove(struct platform_device *pdev) { - struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct clk **clocks = platform_get_drvdata(pdev); - int i; - - if (iodev->dev->of_node) - of_clk_del_provider(iodev->dev->of_node); - - for (i = 0; i < MAX77686_CLKS_NUM; i++) { - struct clk_hw *hw = __clk_get_hw(clocks[i]); - struct max77686_clk *max77686 = to_max77686_clk(hw); - - clkdev_drop(max77686->lookup); - clk_unregister(clocks[i]); - } - return 0; + return max_gen_clk_remove(pdev, MAX77686_CLKS_NUM); } static const struct platform_device_id max77686_clk_id[] = { @@ -228,24 +73,13 @@ MODULE_DEVICE_TABLE(platform, max77686_clk_id); static struct platform_driver max77686_clk_driver = { .driver = { .name = "max77686-clk", - .owner = THIS_MODULE, }, .probe = max77686_clk_probe, .remove = max77686_clk_remove, .id_table = max77686_clk_id, }; -static int __init max77686_clk_init(void) -{ - return platform_driver_register(&max77686_clk_driver); -} -subsys_initcall(max77686_clk_init); - -static void __init max77686_clk_cleanup(void) -{ - platform_driver_unregister(&max77686_clk_driver); -} -module_exit(max77686_clk_cleanup); +module_platform_driver(max77686_clk_driver); MODULE_DESCRIPTION("MAXIM 77686 Clock Driver"); MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>"); diff --git a/drivers/clk/clk-max77802.c b/drivers/clk/clk-max77802.c new file mode 100644 index 00000000000..0729dc723a8 --- /dev/null +++ b/drivers/clk/clk-max77802.c @@ -0,0 +1,97 @@ +/* + * clk-max77802.c - Clock driver for Maxim 77802 + * + * Copyright (C) 2014 Google, Inc + * + * Copyright (C) 2012 Samsung Electornics + * Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on clk-max77686.c + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/mfd/max77686-private.h> +#include <linux/clk-provider.h> +#include <linux/mutex.h> +#include <linux/clkdev.h> + +#include <dt-bindings/clock/maxim,max77802.h> +#include "clk-max-gen.h" + +#define MAX77802_CLOCK_OPMODE_MASK 0x1 +#define MAX77802_CLOCK_LOW_JITTER_SHIFT 0x3 + +static struct clk_init_data max77802_clks_init[MAX77802_CLKS_NUM] = { + [MAX77802_CLK_32K_AP] = { + .name = "32khz_ap", + .ops = &max_gen_clk_ops, + .flags = CLK_IS_ROOT, + }, + [MAX77802_CLK_32K_CP] = { + .name = "32khz_cp", + .ops = &max_gen_clk_ops, + .flags = CLK_IS_ROOT, + }, +}; + +static int max77802_clk_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + int ret; + + ret = max_gen_clk_probe(pdev, iodev->regmap, MAX77802_REG_32KHZ, + max77802_clks_init, MAX77802_CLKS_NUM); + + if (ret) { + dev_err(&pdev->dev, "generic probe failed %d\n", ret); + return ret; + } + + /* Enable low-jitter mode on the 32khz clocks. */ + ret = regmap_update_bits(iodev->regmap, MAX77802_REG_32KHZ, + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT, + 1 << MAX77802_CLOCK_LOW_JITTER_SHIFT); + if (ret < 0) + dev_err(&pdev->dev, "failed to enable low-jitter mode\n"); + + return ret; +} + +static int max77802_clk_remove(struct platform_device *pdev) +{ + return max_gen_clk_remove(pdev, MAX77802_CLKS_NUM); +} + +static const struct platform_device_id max77802_clk_id[] = { + { "max77802-clk", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77802_clk_id); + +static struct platform_driver max77802_clk_driver = { + .driver = { + .name = "max77802-clk", + }, + .probe = max77802_clk_probe, + .remove = max77802_clk_remove, + .id_table = max77802_clk_id, +}; + +module_platform_driver(max77802_clk_driver); + +MODULE_DESCRIPTION("MAXIM 77802 Clock Driver"); +MODULE_AUTHOR("Javier Martinez Canillas <javier.martinez@collabora.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/clk-palmas.c b/drivers/clk/clk-palmas.c index 781630e1372..8d459923a15 100644 --- a/drivers/clk/clk-palmas.c +++ b/drivers/clk/clk-palmas.c @@ -292,7 +292,6 @@ static int palmas_clks_remove(struct platform_device *pdev) static struct platform_driver palmas_clks_driver = { .driver = { .name = "palmas-clk", - .owner = THIS_MODULE, .of_match_table = palmas_clks_of_match, }, .probe = palmas_clks_probe, diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c index 1ada79a2805..4a755135bcd 100644 --- a/drivers/clk/clk-twl6040.c +++ b/drivers/clk/clk-twl6040.c @@ -112,7 +112,6 @@ static int twl6040_clk_remove(struct platform_device *pdev) static struct platform_driver twl6040_clk_driver = { .driver = { .name = "twl6040-clk", - .owner = THIS_MODULE, }, .probe = twl6040_clk_probe, .remove = twl6040_clk_remove, diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index b131041c8f4..ef67719f4e5 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -395,7 +395,6 @@ static struct platform_driver wm831x_clk_driver = { .probe = wm831x_clk_probe, .driver = { .name = "wm831x-clk", - .owner = THIS_MODULE, }, }; diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index bacc06ff939..4896ae9e23d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -100,6 +100,8 @@ static void clk_enable_unlock(unsigned long flags) static struct dentry *rootdir; static int inited = 0; +static DEFINE_MUTEX(clk_debug_lock); +static HLIST_HEAD(clk_debug_list); static struct hlist_head *all_lists[] = { &clk_root_list, @@ -117,11 +119,11 @@ static void clk_summary_show_one(struct seq_file *s, struct clk *c, int level) if (!c) return; - seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu\n", + seq_printf(s, "%*s%-*s %11d %12d %11lu %10lu %-3d\n", level * 3 + 1, "", 30 - level * 3, c->name, c->enable_count, c->prepare_count, clk_get_rate(c), - clk_get_accuracy(c)); + clk_get_accuracy(c), clk_get_phase(c)); } static void clk_summary_show_subtree(struct seq_file *s, struct clk *c, @@ -143,8 +145,8 @@ static int clk_summary_show(struct seq_file *s, void *data) struct clk *c; struct hlist_head **lists = (struct hlist_head **)s->private; - seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy\n"); - seq_puts(s, "--------------------------------------------------------------------------------\n"); + seq_puts(s, " clock enable_cnt prepare_cnt rate accuracy phase\n"); + seq_puts(s, "----------------------------------------------------------------------------------------\n"); clk_prepare_lock(); @@ -180,6 +182,7 @@ static void clk_dump_one(struct seq_file *s, struct clk *c, int level) seq_printf(s, "\"prepare_count\": %d,", c->prepare_count); seq_printf(s, "\"rate\": %lu", clk_get_rate(c)); seq_printf(s, "\"accuracy\": %lu", clk_get_accuracy(c)); + seq_printf(s, "\"phase\": %d", clk_get_phase(c)); } static void clk_dump_subtree(struct seq_file *s, struct clk *c, int level) @@ -264,6 +267,11 @@ static int clk_debug_create_one(struct clk *clk, struct dentry *pdentry) if (!d) goto err_out; + d = debugfs_create_u32("clk_phase", S_IRUGO, clk->dentry, + (u32 *)&clk->phase); + if (!d) + goto err_out; + d = debugfs_create_x32("clk_flags", S_IRUGO, clk->dentry, (u32 *)&clk->flags); if (!d) @@ -300,28 +308,6 @@ out: return ret; } -/* caller must hold prepare_lock */ -static int clk_debug_create_subtree(struct clk *clk, struct dentry *pdentry) -{ - struct clk *child; - int ret = -EINVAL;; - - if (!clk || !pdentry) - goto out; - - ret = clk_debug_create_one(clk, pdentry); - - if (ret) - goto out; - - hlist_for_each_entry(child, &clk->children, child_node) - clk_debug_create_subtree(child, pdentry); - - ret = 0; -out: - return ret; -} - /** * clk_debug_register - add a clk node to the debugfs clk tree * @clk: the clk being added to the debugfs clk tree @@ -329,20 +315,21 @@ out: * Dynamically adds a clk to the debugfs clk tree if debugfs has been * initialized. Otherwise it bails out early since the debugfs clk tree * will be created lazily by clk_debug_init as part of a late_initcall. - * - * Caller must hold prepare_lock. Only clk_init calls this function (so - * far) so this is taken care. */ static int clk_debug_register(struct clk *clk) { int ret = 0; + mutex_lock(&clk_debug_lock); + hlist_add_head(&clk->debug_node, &clk_debug_list); + if (!inited) - goto out; + goto unlock; - ret = clk_debug_create_subtree(clk, rootdir); + ret = clk_debug_create_one(clk, rootdir); +unlock: + mutex_unlock(&clk_debug_lock); -out: return ret; } @@ -353,12 +340,18 @@ out: * Dynamically removes a clk and all it's children clk nodes from the * debugfs clk tree if clk->dentry points to debugfs created by * clk_debug_register in __clk_init. - * - * Caller must hold prepare_lock. */ static void clk_debug_unregister(struct clk *clk) { + mutex_lock(&clk_debug_lock); + if (!clk->dentry) + goto out; + + hlist_del_init(&clk->debug_node); debugfs_remove_recursive(clk->dentry); + clk->dentry = NULL; +out: + mutex_unlock(&clk_debug_lock); } struct dentry *clk_debugfs_add_file(struct clk *clk, char *name, umode_t mode, @@ -415,17 +408,12 @@ static int __init clk_debug_init(void) if (!d) return -ENOMEM; - clk_prepare_lock(); - - hlist_for_each_entry(clk, &clk_root_list, child_node) - clk_debug_create_subtree(clk, rootdir); - - hlist_for_each_entry(clk, &clk_orphan_list, child_node) - clk_debug_create_subtree(clk, rootdir); + mutex_lock(&clk_debug_lock); + hlist_for_each_entry(clk, &clk_debug_list, debug_node) + clk_debug_create_one(clk, rootdir); inited = 1; - - clk_prepare_unlock(); + mutex_unlock(&clk_debug_lock); return 0; } @@ -1744,6 +1732,77 @@ out: EXPORT_SYMBOL_GPL(clk_set_parent); /** + * clk_set_phase - adjust the phase shift of a clock signal + * @clk: clock signal source + * @degrees: number of degrees the signal is shifted + * + * Shifts the phase of a clock signal by the specified + * degrees. Returns 0 on success, -EERROR otherwise. + * + * This function makes no distinction about the input or reference + * signal that we adjust the clock signal phase against. For example + * phase locked-loop clock signal generators we may shift phase with + * respect to feedback clock signal input, but for other cases the + * clock phase may be shifted with respect to some other, unspecified + * signal. + * + * Additionally the concept of phase shift does not propagate through + * the clock tree hierarchy, which sets it apart from clock rates and + * clock accuracy. A parent clock phase attribute does not have an + * impact on the phase attribute of a child clock. + */ +int clk_set_phase(struct clk *clk, int degrees) +{ + int ret = 0; + + if (!clk) + goto out; + + /* sanity check degrees */ + degrees %= 360; + if (degrees < 0) + degrees += 360; + + clk_prepare_lock(); + + if (!clk->ops->set_phase) + goto out_unlock; + + ret = clk->ops->set_phase(clk->hw, degrees); + + if (!ret) + clk->phase = degrees; + +out_unlock: + clk_prepare_unlock(); + +out: + return ret; +} + +/** + * clk_get_phase - return the phase shift of a clock signal + * @clk: clock signal source + * + * Returns the phase shift of a clock node in degrees, otherwise returns + * -EERROR. + */ +int clk_get_phase(struct clk *clk) +{ + int ret = 0; + + if (!clk) + goto out; + + clk_prepare_lock(); + ret = clk->phase; + clk_prepare_unlock(); + +out: + return ret; +} + +/** * __clk_init - initialize the data structures in a struct clk * @dev: device initializing this clk, placeholder for now * @clk: clk being initialized @@ -1862,6 +1921,16 @@ int __clk_init(struct device *dev, struct clk *clk) clk->accuracy = 0; /* + * Set clk's phase. + * Since a phase is by definition relative to its parent, just + * query the current clock phase, or just assume it's in phase. + */ + if (clk->ops->get_phase) + clk->phase = clk->ops->get_phase(clk->hw); + else + clk->phase = 0; + + /* * Set clk's rate. The preferred method is to use .recalc_rate. For * simple clocks and lazy developers the default fallback is to use the * parent's rate. If a clock doesn't have a parent (or is orphaned) @@ -2092,14 +2161,16 @@ void clk_unregister(struct clk *clk) { unsigned long flags; - if (!clk || WARN_ON_ONCE(IS_ERR(clk))) - return; + if (!clk || WARN_ON_ONCE(IS_ERR(clk))) + return; + + clk_debug_unregister(clk); clk_prepare_lock(); if (clk->ops == &clk_nodrv_ops) { pr_err("%s: unregistered clock: %s\n", __func__, clk->name); - goto out; + return; } /* * Assign empty clock ops for consumers that might still hold @@ -2118,16 +2189,13 @@ void clk_unregister(struct clk *clk) clk_set_parent(child, NULL); } - clk_debug_unregister(clk); - hlist_del_init(&clk->child_node); if (clk->prepare_count) pr_warn("%s: unregistering prepared clock: %s\n", __func__, clk->name); - kref_put(&clk->ref, __clk_release); -out: + clk_prepare_unlock(); } EXPORT_SYMBOL_GPL(clk_unregister); diff --git a/drivers/clk/hisilicon/clk-hix5hd2.c b/drivers/clk/hisilicon/clk-hix5hd2.c index e5fcfb4e32e..3f369c60fe5 100644 --- a/drivers/clk/hisilicon/clk-hix5hd2.c +++ b/drivers/clk/hisilicon/clk-hix5hd2.c @@ -9,6 +9,8 @@ #include <linux/of_address.h> #include <dt-bindings/clock/hix5hd2-clock.h> +#include <linux/slab.h> +#include <linux/delay.h> #include "clk.h" static struct hisi_fixed_rate_clock hix5hd2_fixed_rate_clks[] __initdata = { @@ -48,9 +50,9 @@ static const char *sfc_mux_p[] __initconst = { "24m", "150m", "200m", "100m", "75m", }; static u32 sfc_mux_table[] = {0, 4, 5, 6, 7}; -static const char *sdio1_mux_p[] __initconst = { +static const char *sdio_mux_p[] __initconst = { "75m", "100m", "50m", "15m", }; -static u32 sdio1_mux_table[] = {0, 1, 2, 3}; +static u32 sdio_mux_table[] = {0, 1, 2, 3}; static const char *fephy_mux_p[] __initconst = { "25m", "125m"}; static u32 fephy_mux_table[] = {0, 1}; @@ -59,28 +61,243 @@ static u32 fephy_mux_table[] = {0, 1}; static struct hisi_mux_clock hix5hd2_mux_clks[] __initdata = { { HIX5HD2_SFC_MUX, "sfc_mux", sfc_mux_p, ARRAY_SIZE(sfc_mux_p), CLK_SET_RATE_PARENT, 0x5c, 8, 3, 0, sfc_mux_table, }, - { HIX5HD2_MMC_MUX, "mmc_mux", sdio1_mux_p, ARRAY_SIZE(sdio1_mux_p), - CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio1_mux_table, }, + { HIX5HD2_MMC_MUX, "mmc_mux", sdio_mux_p, ARRAY_SIZE(sdio_mux_p), + CLK_SET_RATE_PARENT, 0xa0, 8, 2, 0, sdio_mux_table, }, + { HIX5HD2_SD_MUX, "sd_mux", sdio_mux_p, ARRAY_SIZE(sdio_mux_p), + CLK_SET_RATE_PARENT, 0x9c, 8, 2, 0, sdio_mux_table, }, { HIX5HD2_FEPHY_MUX, "fephy_mux", fephy_mux_p, ARRAY_SIZE(fephy_mux_p), CLK_SET_RATE_PARENT, 0x120, 8, 2, 0, fephy_mux_table, }, }; static struct hisi_gate_clock hix5hd2_gate_clks[] __initdata = { - /*sfc*/ + /* sfc */ { HIX5HD2_SFC_CLK, "clk_sfc", "sfc_mux", CLK_SET_RATE_PARENT, 0x5c, 0, 0, }, { HIX5HD2_SFC_RST, "rst_sfc", "clk_sfc", CLK_SET_RATE_PARENT, 0x5c, 4, CLK_GATE_SET_TO_DISABLE, }, - /*sdio1*/ + /* sdio0 */ + { HIX5HD2_SD_BIU_CLK, "clk_sd_biu", "200m", + CLK_SET_RATE_PARENT, 0x9c, 0, 0, }, + { HIX5HD2_SD_CIU_CLK, "clk_sd_ciu", "sd_mux", + CLK_SET_RATE_PARENT, 0x9c, 1, 0, }, + { HIX5HD2_SD_CIU_RST, "rst_sd_ciu", "clk_sd_ciu", + CLK_SET_RATE_PARENT, 0x9c, 4, CLK_GATE_SET_TO_DISABLE, }, + /* sdio1 */ { HIX5HD2_MMC_BIU_CLK, "clk_mmc_biu", "200m", CLK_SET_RATE_PARENT, 0xa0, 0, 0, }, { HIX5HD2_MMC_CIU_CLK, "clk_mmc_ciu", "mmc_mux", CLK_SET_RATE_PARENT, 0xa0, 1, 0, }, { HIX5HD2_MMC_CIU_RST, "rst_mmc_ciu", "clk_mmc_ciu", CLK_SET_RATE_PARENT, 0xa0, 4, CLK_GATE_SET_TO_DISABLE, }, + /* gsf */ + { HIX5HD2_FWD_BUS_CLK, "clk_fwd_bus", NULL, 0, 0xcc, 0, 0, }, + { HIX5HD2_FWD_SYS_CLK, "clk_fwd_sys", "clk_fwd_bus", 0, 0xcc, 5, 0, }, + { HIX5HD2_MAC0_PHY_CLK, "clk_fephy", "clk_fwd_sys", + CLK_SET_RATE_PARENT, 0x120, 0, 0, }, + /* wdg0 */ + { HIX5HD2_WDG0_CLK, "clk_wdg0", "24m", + CLK_SET_RATE_PARENT, 0x178, 0, 0, }, + { HIX5HD2_WDG0_RST, "rst_wdg0", "clk_wdg0", + CLK_SET_RATE_PARENT, 0x178, 4, CLK_GATE_SET_TO_DISABLE, }, + /* I2C */ + {HIX5HD2_I2C0_CLK, "clk_i2c0", "100m", + CLK_SET_RATE_PARENT, 0x06c, 4, 0, }, + {HIX5HD2_I2C0_RST, "rst_i2c0", "clk_i2c0", + CLK_SET_RATE_PARENT, 0x06c, 5, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C1_CLK, "clk_i2c1", "100m", + CLK_SET_RATE_PARENT, 0x06c, 8, 0, }, + {HIX5HD2_I2C1_RST, "rst_i2c1", "clk_i2c1", + CLK_SET_RATE_PARENT, 0x06c, 9, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C2_CLK, "clk_i2c2", "100m", + CLK_SET_RATE_PARENT, 0x06c, 12, 0, }, + {HIX5HD2_I2C2_RST, "rst_i2c2", "clk_i2c2", + CLK_SET_RATE_PARENT, 0x06c, 13, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C3_CLK, "clk_i2c3", "100m", + CLK_SET_RATE_PARENT, 0x06c, 16, 0, }, + {HIX5HD2_I2C3_RST, "rst_i2c3", "clk_i2c3", + CLK_SET_RATE_PARENT, 0x06c, 17, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C4_CLK, "clk_i2c4", "100m", + CLK_SET_RATE_PARENT, 0x06c, 20, 0, }, + {HIX5HD2_I2C4_RST, "rst_i2c4", "clk_i2c4", + CLK_SET_RATE_PARENT, 0x06c, 21, CLK_GATE_SET_TO_DISABLE, }, + {HIX5HD2_I2C5_CLK, "clk_i2c5", "100m", + CLK_SET_RATE_PARENT, 0x06c, 0, 0, }, + {HIX5HD2_I2C5_RST, "rst_i2c5", "clk_i2c5", + CLK_SET_RATE_PARENT, 0x06c, 1, CLK_GATE_SET_TO_DISABLE, }, }; +enum hix5hd2_clk_type { + TYPE_COMPLEX, + TYPE_ETHER, +}; + +struct hix5hd2_complex_clock { + const char *name; + const char *parent_name; + u32 id; + u32 ctrl_reg; + u32 ctrl_clk_mask; + u32 ctrl_rst_mask; + u32 phy_reg; + u32 phy_clk_mask; + u32 phy_rst_mask; + enum hix5hd2_clk_type type; +}; + +struct hix5hd2_clk_complex { + struct clk_hw hw; + u32 id; + void __iomem *ctrl_reg; + u32 ctrl_clk_mask; + u32 ctrl_rst_mask; + void __iomem *phy_reg; + u32 phy_clk_mask; + u32 phy_rst_mask; +}; + +static struct hix5hd2_complex_clock hix5hd2_complex_clks[] __initdata = { + {"clk_mac0", "clk_fephy", HIX5HD2_MAC0_CLK, + 0xcc, 0xa, 0x500, 0x120, 0, 0x10, TYPE_ETHER}, + {"clk_mac1", "clk_fwd_sys", HIX5HD2_MAC1_CLK, + 0xcc, 0x14, 0xa00, 0x168, 0x2, 0, TYPE_ETHER}, + {"clk_sata", NULL, HIX5HD2_SATA_CLK, + 0xa8, 0x1f, 0x300, 0xac, 0x1, 0x0, TYPE_COMPLEX}, + {"clk_usb", NULL, HIX5HD2_USB_CLK, + 0xb8, 0xff, 0x3f000, 0xbc, 0x7, 0x3f00, TYPE_COMPLEX}, +}; + +#define to_complex_clk(_hw) container_of(_hw, struct hix5hd2_clk_complex, hw) + +static int clk_ether_prepare(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val |= clk->ctrl_clk_mask | clk->ctrl_rst_mask; + writel_relaxed(val, clk->ctrl_reg); + val &= ~(clk->ctrl_rst_mask); + writel_relaxed(val, clk->ctrl_reg); + + val = readl_relaxed(clk->phy_reg); + val |= clk->phy_clk_mask; + val &= ~(clk->phy_rst_mask); + writel_relaxed(val, clk->phy_reg); + mdelay(10); + + val &= ~(clk->phy_clk_mask); + val |= clk->phy_rst_mask; + writel_relaxed(val, clk->phy_reg); + mdelay(10); + + val |= clk->phy_clk_mask; + val &= ~(clk->phy_rst_mask); + writel_relaxed(val, clk->phy_reg); + mdelay(30); + return 0; +} + +static void clk_ether_unprepare(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val &= ~(clk->ctrl_clk_mask); + writel_relaxed(val, clk->ctrl_reg); +} + +static struct clk_ops clk_ether_ops = { + .prepare = clk_ether_prepare, + .unprepare = clk_ether_unprepare, +}; + +static int clk_complex_enable(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val |= clk->ctrl_clk_mask; + val &= ~(clk->ctrl_rst_mask); + writel_relaxed(val, clk->ctrl_reg); + + val = readl_relaxed(clk->phy_reg); + val |= clk->phy_clk_mask; + val &= ~(clk->phy_rst_mask); + writel_relaxed(val, clk->phy_reg); + + return 0; +} + +static void clk_complex_disable(struct clk_hw *hw) +{ + struct hix5hd2_clk_complex *clk = to_complex_clk(hw); + u32 val; + + val = readl_relaxed(clk->ctrl_reg); + val |= clk->ctrl_rst_mask; + val &= ~(clk->ctrl_clk_mask); + writel_relaxed(val, clk->ctrl_reg); + + val = readl_relaxed(clk->phy_reg); + val |= clk->phy_rst_mask; + val &= ~(clk->phy_clk_mask); + writel_relaxed(val, clk->phy_reg); +} + +static struct clk_ops clk_complex_ops = { + .enable = clk_complex_enable, + .disable = clk_complex_disable, +}; + +void __init hix5hd2_clk_register_complex(struct hix5hd2_complex_clock *clks, + int nums, struct hisi_clock_data *data) +{ + void __iomem *base = data->base; + int i; + + for (i = 0; i < nums; i++) { + struct hix5hd2_clk_complex *p_clk; + struct clk *clk; + struct clk_init_data init; + + p_clk = kzalloc(sizeof(*p_clk), GFP_KERNEL); + if (!p_clk) + return; + + init.name = clks[i].name; + if (clks[i].type == TYPE_ETHER) + init.ops = &clk_ether_ops; + else + init.ops = &clk_complex_ops; + + init.flags = CLK_IS_BASIC; + init.parent_names = + (clks[i].parent_name ? &clks[i].parent_name : NULL); + init.num_parents = (clks[i].parent_name ? 1 : 0); + + p_clk->ctrl_reg = base + clks[i].ctrl_reg; + p_clk->ctrl_clk_mask = clks[i].ctrl_clk_mask; + p_clk->ctrl_rst_mask = clks[i].ctrl_rst_mask; + p_clk->phy_reg = base + clks[i].phy_reg; + p_clk->phy_clk_mask = clks[i].phy_clk_mask; + p_clk->phy_rst_mask = clks[i].phy_rst_mask; + p_clk->hw.init = &init; + + clk = clk_register(NULL, &p_clk->hw); + if (IS_ERR(clk)) { + kfree(p_clk); + pr_err("%s: failed to register clock %s\n", + __func__, clks[i].name); + continue; + } + + data->clk_data.clks[clks[i].id] = clk; + } +} + static void __init hix5hd2_clk_init(struct device_node *np) { struct hisi_clock_data *clk_data; @@ -96,6 +313,9 @@ static void __init hix5hd2_clk_init(struct device_node *np) clk_data); hisi_clk_register_gate(hix5hd2_gate_clks, ARRAY_SIZE(hix5hd2_gate_clks), clk_data); + hix5hd2_clk_register_complex(hix5hd2_complex_clks, + ARRAY_SIZE(hix5hd2_complex_clks), + clk_data); } CLK_OF_DECLARE(hix5hd2_clk, "hisilicon,hix5hd2-clock", hix5hd2_clk_init); diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c index bef198a8386..756f0f39d6a 100644 --- a/drivers/clk/mvebu/armada-370.c +++ b/drivers/clk/mvebu/armada-370.c @@ -23,6 +23,7 @@ */ #define SARL 0 /* Low part [0:31] */ +#define SARL_A370_SSCG_ENABLE BIT(10) #define SARL_A370_PCLK_FREQ_OPT 11 #define SARL_A370_PCLK_FREQ_OPT_MASK 0xF #define SARL_A370_FAB_FREQ_OPT 15 @@ -133,10 +134,17 @@ static void __init a370_get_clk_ratio( } } +static bool a370_is_sscg_enabled(void __iomem *sar) +{ + return !(readl(sar) & SARL_A370_SSCG_ENABLE); +} + static const struct coreclk_soc_desc a370_coreclks = { .get_tclk_freq = a370_get_tclk_freq, .get_cpu_freq = a370_get_cpu_freq, .get_clk_ratio = a370_get_clk_ratio, + .is_sscg_enabled = a370_is_sscg_enabled, + .fix_sscg_deviation = kirkwood_fix_sscg_deviation, .ratios = a370_coreclk_ratios, .num_ratios = ARRAY_SIZE(a370_coreclk_ratios), }; diff --git a/drivers/clk/mvebu/armada-375.c b/drivers/clk/mvebu/armada-375.c index c991a4d95e1..c7af2242b79 100644 --- a/drivers/clk/mvebu/armada-375.c +++ b/drivers/clk/mvebu/armada-375.c @@ -27,14 +27,14 @@ * all modified at the same time, and not separately as for the Armada * 370 or the Armada XP SoCs. * - * SAR0[21:17] : CPU frequency DDR frequency L2 frequency + * SAR1[21:17] : CPU frequency DDR frequency L2 frequency * 6 = 400 MHz 400 MHz 200 MHz * 15 = 600 MHz 600 MHz 300 MHz * 21 = 800 MHz 534 MHz 400 MHz * 25 = 1000 MHz 500 MHz 500 MHz * others reserved. * - * SAR0[22] : TCLK frequency + * SAR1[22] : TCLK frequency * 0 = 166 MHz * 1 = 200 MHz */ diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c index 25ceccf939a..b7fcb469c87 100644 --- a/drivers/clk/mvebu/common.c +++ b/drivers/clk/mvebu/common.c @@ -26,8 +26,85 @@ * Core Clocks */ +#define SSCG_CONF_MODE(reg) (((reg) >> 16) & 0x3) +#define SSCG_SPREAD_DOWN 0x0 +#define SSCG_SPREAD_UP 0x1 +#define SSCG_SPREAD_CENTRAL 0x2 +#define SSCG_CONF_LOW(reg) (((reg) >> 8) & 0xFF) +#define SSCG_CONF_HIGH(reg) ((reg) & 0xFF) + static struct clk_onecell_data clk_data; +/* + * This function can be used by the Kirkwood, the Armada 370, the + * Armada XP and the Armada 375 SoC. The name of the function was + * chosen following the dt convention: using the first known SoC + * compatible with it. + */ +u32 kirkwood_fix_sscg_deviation(u32 system_clk) +{ + struct device_node *sscg_np = NULL; + void __iomem *sscg_map; + u32 sscg_reg; + s32 low_bound, high_bound; + u64 freq_swing_half; + + sscg_np = of_find_node_by_name(NULL, "sscg"); + if (sscg_np == NULL) { + pr_err("cannot get SSCG register node\n"); + return system_clk; + } + + sscg_map = of_iomap(sscg_np, 0); + if (sscg_map == NULL) { + pr_err("cannot map SSCG register\n"); + goto out; + } + + sscg_reg = readl(sscg_map); + high_bound = SSCG_CONF_HIGH(sscg_reg); + low_bound = SSCG_CONF_LOW(sscg_reg); + + if ((high_bound - low_bound) <= 0) + goto out; + /* + * From Marvell engineer we got the following formula (when + * this code was written, the datasheet was erroneous) + * Spread percentage = 1/96 * (H - L) / H + * H = SSCG_High_Boundary + * L = SSCG_Low_Boundary + * + * As the deviation is half of spread then it lead to the + * following formula in the code. + * + * To avoid an overflow and not lose any significant digit in + * the same time we have to use a 64 bit integer. + */ + + freq_swing_half = (((u64)high_bound - (u64)low_bound) + * (u64)system_clk); + do_div(freq_swing_half, (2 * 96 * high_bound)); + + switch (SSCG_CONF_MODE(sscg_reg)) { + case SSCG_SPREAD_DOWN: + system_clk -= freq_swing_half; + break; + case SSCG_SPREAD_UP: + system_clk += freq_swing_half; + break; + case SSCG_SPREAD_CENTRAL: + default: + break; + } + + iounmap(sscg_map); + +out: + of_node_put(sscg_np); + + return system_clk; +} + void __init mvebu_coreclk_setup(struct device_node *np, const struct coreclk_soc_desc *desc) { @@ -62,6 +139,11 @@ void __init mvebu_coreclk_setup(struct device_node *np, of_property_read_string_index(np, "clock-output-names", 1, &cpuclk_name); rate = desc->get_cpu_freq(base); + + if (desc->is_sscg_enabled && desc->fix_sscg_deviation + && desc->is_sscg_enabled(base)) + rate = desc->fix_sscg_deviation(rate); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, CLK_IS_ROOT, rate); WARN_ON(IS_ERR(clk_data.clks[1])); @@ -89,8 +171,10 @@ void __init mvebu_coreclk_setup(struct device_node *np, * Clock Gating Control */ +DEFINE_SPINLOCK(ctrl_gating_lock); + struct clk_gating_ctrl { - spinlock_t lock; + spinlock_t *lock; struct clk **gates; int num_gates; }; @@ -138,7 +222,8 @@ void __init mvebu_clk_gating_setup(struct device_node *np, if (WARN_ON(!ctrl)) goto ctrl_out; - spin_lock_init(&ctrl->lock); + /* lock must already be initialized */ + ctrl->lock = &ctrl_gating_lock; /* Count, allocate, and register clock gates */ for (n = 0; desc[n].name;) @@ -155,7 +240,7 @@ void __init mvebu_clk_gating_setup(struct device_node *np, (desc[n].parent) ? desc[n].parent : default_parent; ctrl->gates[n] = clk_register_gate(NULL, desc[n].name, parent, desc[n].flags, base, desc[n].bit_idx, - 0, &ctrl->lock); + 0, ctrl->lock); WARN_ON(IS_ERR(ctrl->gates[n])); } diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h index f968b4d9df9..783b5631a45 100644 --- a/drivers/clk/mvebu/common.h +++ b/drivers/clk/mvebu/common.h @@ -17,6 +17,8 @@ #include <linux/kernel.h> +extern spinlock_t ctrl_gating_lock; + struct device_node; struct coreclk_ratio { @@ -28,6 +30,8 @@ struct coreclk_soc_desc { u32 (*get_tclk_freq)(void __iomem *sar); u32 (*get_cpu_freq)(void __iomem *sar); void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + bool (*is_sscg_enabled)(void __iomem *sar); + u32 (*fix_sscg_deviation)(u32 system_clk); const struct coreclk_ratio *ratios; int num_ratios; }; @@ -45,4 +49,9 @@ void __init mvebu_coreclk_setup(struct device_node *np, void __init mvebu_clk_gating_setup(struct device_node *np, const struct clk_gating_soc_desc *desc); +/* + * This function is shared among the Kirkwood, Armada 370, Armada XP + * and Armada 375 SoC + */ +u32 kirkwood_fix_sscg_deviation(u32 system_clk); #endif diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c index ddb666a8650..99550f25975 100644 --- a/drivers/clk/mvebu/kirkwood.c +++ b/drivers/clk/mvebu/kirkwood.c @@ -13,9 +13,11 @@ */ #include <linux/kernel.h> +#include <linux/slab.h> #include <linux/clk-provider.h> #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include "common.h" /* @@ -214,7 +216,6 @@ static const struct clk_gating_soc_desc kirkwood_gating_desc[] __initconst = { { "runit", NULL, 7, 0 }, { "xor0", NULL, 8, 0 }, { "audio", NULL, 9, 0 }, - { "powersave", "cpuclk", 11, 0 }, { "sata0", NULL, 14, 0 }, { "sata1", NULL, 15, 0 }, { "xor1", NULL, 16, 0 }, @@ -225,6 +226,101 @@ static const struct clk_gating_soc_desc kirkwood_gating_desc[] __initconst = { { } }; + +/* + * Clock Muxing Control + */ + +struct clk_muxing_soc_desc { + const char *name; + const char **parents; + int num_parents; + int shift; + int width; + unsigned long flags; +}; + +struct clk_muxing_ctrl { + spinlock_t *lock; + struct clk **muxes; + int num_muxes; +}; + +static const char *powersave_parents[] = { + "cpuclk", + "ddrclk", +}; + +static const struct clk_muxing_soc_desc kirkwood_mux_desc[] __initconst = { + { "powersave", powersave_parents, ARRAY_SIZE(powersave_parents), + 11, 1, 0 }, +}; + +#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) + +static struct clk *clk_muxing_get_src( + struct of_phandle_args *clkspec, void *data) +{ + struct clk_muxing_ctrl *ctrl = (struct clk_muxing_ctrl *)data; + int n; + + if (clkspec->args_count < 1) + return ERR_PTR(-EINVAL); + + for (n = 0; n < ctrl->num_muxes; n++) { + struct clk_mux *mux = + to_clk_mux(__clk_get_hw(ctrl->muxes[n])); + if (clkspec->args[0] == mux->shift) + return ctrl->muxes[n]; + } + return ERR_PTR(-ENODEV); +} + +static void __init kirkwood_clk_muxing_setup(struct device_node *np, + const struct clk_muxing_soc_desc *desc) +{ + struct clk_muxing_ctrl *ctrl; + void __iomem *base; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (WARN_ON(!ctrl)) + goto ctrl_out; + + /* lock must already be initialized */ + ctrl->lock = &ctrl_gating_lock; + + /* Count, allocate, and register clock muxes */ + for (n = 0; desc[n].name;) + n++; + + ctrl->num_muxes = n; + ctrl->muxes = kcalloc(ctrl->num_muxes, sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!ctrl->muxes)) + goto muxes_out; + + for (n = 0; n < ctrl->num_muxes; n++) { + ctrl->muxes[n] = clk_register_mux(NULL, desc[n].name, + desc[n].parents, desc[n].num_parents, + desc[n].flags, base, desc[n].shift, + desc[n].width, desc[n].flags, ctrl->lock); + WARN_ON(IS_ERR(ctrl->muxes[n])); + } + + of_clk_add_provider(np, clk_muxing_get_src, ctrl); + + return; +muxes_out: + kfree(ctrl); +ctrl_out: + iounmap(base); +} + static void __init kirkwood_clk_init(struct device_node *np) { struct device_node *cgnp = @@ -236,8 +332,10 @@ static void __init kirkwood_clk_init(struct device_node *np) else mvebu_coreclk_setup(np, &kirkwood_coreclks); - if (cgnp) + if (cgnp) { mvebu_clk_gating_setup(cgnp, kirkwood_gating_desc); + kirkwood_clk_muxing_setup(cgnp, kirkwood_mux_desc); + } } CLK_OF_DECLARE(kirkwood_clk, "marvell,kirkwood-core-clock", kirkwood_clk_init); diff --git a/drivers/clk/pxa/Makefile b/drivers/clk/pxa/Makefile new file mode 100644 index 00000000000..4ff2abcd500 --- /dev/null +++ b/drivers/clk/pxa/Makefile @@ -0,0 +1,2 @@ +obj-y += clk-pxa.o +obj-$(CONFIG_PXA27x) += clk-pxa27x.o diff --git a/drivers/clk/pxa/clk-pxa.c b/drivers/clk/pxa/clk-pxa.c new file mode 100644 index 00000000000..ef3c05389c0 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa.c @@ -0,0 +1,97 @@ +/* + * Marvell PXA family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Common clock code for PXA clocks ("CKEN" type clocks + DT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of.h> + +#include <dt-bindings/clock/pxa-clock.h> +#include "clk-pxa.h" + +DEFINE_SPINLOCK(lock); + +static struct clk *pxa_clocks[CLK_MAX]; +static struct clk_onecell_data onecell_data = { + .clks = pxa_clocks, + .clk_num = CLK_MAX, +}; + +#define to_pxa_clk(_hw) container_of(_hw, struct pxa_clk_cken, hw) + +static unsigned long cken_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct pxa_clk_cken *pclk = to_pxa_clk(hw); + struct clk_fixed_factor *fix; + + if (!pclk->is_in_low_power || pclk->is_in_low_power()) + fix = &pclk->lp; + else + fix = &pclk->hp; + fix->hw.clk = hw->clk; + return clk_fixed_factor_ops.recalc_rate(&fix->hw, parent_rate); +} + +static struct clk_ops cken_rate_ops = { + .recalc_rate = cken_recalc_rate, +}; + +static u8 cken_get_parent(struct clk_hw *hw) +{ + struct pxa_clk_cken *pclk = to_pxa_clk(hw); + + if (!pclk->is_in_low_power) + return 0; + return pclk->is_in_low_power() ? 0 : 1; +} + +static struct clk_ops cken_mux_ops = { + .get_parent = cken_get_parent, + .set_parent = dummy_clk_set_parent, +}; + +void __init clkdev_pxa_register(int ckid, const char *con_id, + const char *dev_id, struct clk *clk) +{ + if (!IS_ERR(clk) && (ckid != CLK_NONE)) + pxa_clocks[ckid] = clk; + if (!IS_ERR(clk)) + clk_register_clkdev(clk, con_id, dev_id); +} + +int __init clk_pxa_cken_init(struct pxa_clk_cken *clks, int nb_clks) +{ + int i; + struct pxa_clk_cken *pclk; + struct clk *clk; + + for (i = 0; i < nb_clks; i++) { + pclk = clks + i; + pclk->gate.lock = &lock; + clk = clk_register_composite(NULL, pclk->name, + pclk->parent_names, 2, + &pclk->hw, &cken_mux_ops, + &pclk->hw, &cken_rate_ops, + &pclk->gate.hw, &clk_gate_ops, + pclk->flags); + clkdev_pxa_register(pclk->ckid, pclk->con_id, pclk->dev_id, + clk); + } + return 0; +} + +static void __init pxa_dt_clocks_init(struct device_node *np) +{ + of_clk_add_provider(np, of_clk_src_onecell_get, &onecell_data); +} +CLK_OF_DECLARE(pxa_clks, "marvell,pxa-clocks", pxa_dt_clocks_init); diff --git a/drivers/clk/pxa/clk-pxa.h b/drivers/clk/pxa/clk-pxa.h new file mode 100644 index 00000000000..5fe219d06b4 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa.h @@ -0,0 +1,107 @@ +/* + * Marvell PXA family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Common clock code for PXA clocks ("CKEN" type clocks + DT) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ +#ifndef _CLK_PXA_ +#define _CLK_PXA_ + +#define PARENTS(name) \ + static const char *name ## _parents[] __initconst +#define MUX_RO_RATE_RO_OPS(name, clk_name) \ + static struct clk_hw name ## _mux_hw; \ + static struct clk_hw name ## _rate_hw; \ + static struct clk_ops name ## _mux_ops = { \ + .get_parent = name ## _get_parent, \ + .set_parent = dummy_clk_set_parent, \ + }; \ + static struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + }; \ + static struct clk *clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + &name ## _mux_hw, &name ## _mux_ops, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +#define RATE_RO_OPS(name, clk_name) \ + static struct clk_hw name ## _rate_hw; \ + static struct clk_ops name ## _rate_ops = { \ + .recalc_rate = name ## _get_rate, \ + }; \ + static struct clk *clk_register_ ## name(void) \ + { \ + return clk_register_composite(NULL, clk_name, \ + name ## _parents, \ + ARRAY_SIZE(name ## _parents), \ + NULL, NULL, \ + &name ## _rate_hw, &name ## _rate_ops, \ + NULL, NULL, CLK_GET_RATE_NOCACHE); \ + } + +/* + * CKEN clock type + * This clock takes it source from 2 possible parents : + * - a low power parent + * - a normal parent + * + * +------------+ +-----------+ + * | Low Power | --- | x mult_lp | + * | Clock | | / div_lp |\ + * +------------+ +-----------+ \+-----+ +-----------+ + * | Mux |---| CKEN gate | + * +------------+ +-----------+ /+-----+ +-----------+ + * | High Power | | x mult_hp |/ + * | Clock | --- | / div_hp | + * +------------+ +-----------+ + */ +struct pxa_clk_cken { + struct clk_hw hw; + int ckid; + const char *name; + const char *dev_id; + const char *con_id; + const char **parent_names; + struct clk_fixed_factor lp; + struct clk_fixed_factor hp; + struct clk_gate gate; + bool (*is_in_low_power)(void); + const unsigned long flags; +}; + +#define PXA_CKEN(_dev_id, _con_id, _name, parents, _mult_lp, _div_lp, \ + _mult_hp, _div_hp, is_lp, _cken_reg, _cken_bit, flag) \ + { .ckid = CLK_ ## _name, .name = #_name, \ + .dev_id = _dev_id, .con_id = _con_id, .parent_names = parents,\ + .lp = { .mult = _mult_lp, .div = _div_lp }, \ + .hp = { .mult = _mult_hp, .div = _div_hp }, \ + .is_in_low_power = is_lp, \ + .gate = { .reg = (void __iomem *)_cken_reg, .bit_idx = _cken_bit }, \ + .flags = flag, \ + } +#define PXA_CKEN_1RATE(dev_id, con_id, name, parents, cken_reg, \ + cken_bit, flag) \ + PXA_CKEN(dev_id, con_id, name, parents, 1, 1, 1, 1, \ + NULL, cken_reg, cken_bit, flag) + +static int dummy_clk_set_parent(struct clk_hw *hw, u8 index) +{ + return 0; +} + +extern void clkdev_pxa_register(int ckid, const char *con_id, + const char *dev_id, struct clk *clk); +extern int clk_pxa_cken_init(struct pxa_clk_cken *clks, int nb_clks); + +#endif diff --git a/drivers/clk/pxa/clk-pxa27x.c b/drivers/clk/pxa/clk-pxa27x.c new file mode 100644 index 00000000000..b345cc791e5 --- /dev/null +++ b/drivers/clk/pxa/clk-pxa27x.c @@ -0,0 +1,370 @@ +/* + * Marvell PXA27x family clocks + * + * Copyright (C) 2014 Robert Jarzmik + * + * Heavily inspired from former arch/arm/mach-pxa/clock.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + */ +#include <linux/clk-provider.h> +#include <mach/pxa2xx-regs.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/of.h> + +#include <dt-bindings/clock/pxa-clock.h> +#include "clk-pxa.h" + +#define KHz 1000 +#define MHz (1000 * 1000) + +enum { + PXA_CORE_13Mhz = 0, + PXA_CORE_RUN, + PXA_CORE_TURBO, +}; + +enum { + PXA_BUS_13Mhz = 0, + PXA_BUS_RUN, +}; + +enum { + PXA_LCD_13Mhz = 0, + PXA_LCD_RUN, +}; + +enum { + PXA_MEM_13Mhz = 0, + PXA_MEM_SYSTEM_BUS, + PXA_MEM_RUN, +}; + +static const char * const get_freq_khz[] = { + "core", "run", "cpll", "memory", + "system_bus" +}; + +/* + * Get the clock frequency as reflected by CCSR and the turbo flag. + * We assume these values have been applied via a fcs. + * If info is not 0 we also display the current settings. + */ +unsigned int pxa27x_get_clk_frequency_khz(int info) +{ + struct clk *clk; + unsigned long clks[5]; + int i; + + for (i = 0; i < 5; i++) { + clk = clk_get(NULL, get_freq_khz[i]); + if (IS_ERR(clk)) { + clks[i] = 0; + } else { + clks[i] = clk_get_rate(clk); + clk_put(clk); + } + } + if (info) { + pr_info("Run Mode clock: %ld.%02ldMHz\n", + clks[1] / 1000000, (clks[1] % 1000000) / 10000); + pr_info("Turbo Mode clock: %ld.%02ldMHz\n", + clks[2] / 1000000, (clks[2] % 1000000) / 10000); + pr_info("Memory clock: %ld.%02ldMHz\n", + clks[3] / 1000000, (clks[3] % 1000000) / 10000); + pr_info("System bus clock: %ld.%02ldMHz\n", + clks[4] / 1000000, (clks[4] % 1000000) / 10000); + } + return (unsigned int)clks[0]; +} + +bool pxa27x_is_ppll_disabled(void) +{ + unsigned long ccsr = CCSR; + + return ccsr & (1 << CCCR_PPDIS_BIT); +} + +#define PXA27X_CKEN(dev_id, con_id, parents, mult_hp, div_hp, \ + bit, is_lp, flags) \ + PXA_CKEN(dev_id, con_id, bit, parents, 1, 1, mult_hp, div_hp, \ + is_lp, &CKEN, CKEN_ ## bit, flags) +#define PXA27X_PBUS_CKEN(dev_id, con_id, bit, mult_hp, div_hp, delay) \ + PXA27X_CKEN(dev_id, con_id, pxa27x_pbus_parents, mult_hp, \ + div_hp, bit, pxa27x_is_ppll_disabled, 0) + +PARENTS(pxa27x_pbus) = { "osc_13mhz", "ppll_312mhz" }; +PARENTS(pxa27x_sbus) = { "system_bus", "system_bus" }; +PARENTS(pxa27x_32Mhz_bus) = { "osc_32_768khz", "osc_32_768khz" }; +PARENTS(pxa27x_lcd_bus) = { "lcd_base", "lcd_base" }; +PARENTS(pxa27x_membus) = { "lcd_base", "lcd_base" }; + +#define PXA27X_CKEN_1RATE(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + &CKEN, CKEN_ ## bit, 0) +#define PXA27X_CKEN_1RATE_AO(dev_id, con_id, bit, parents, delay) \ + PXA_CKEN_1RATE(dev_id, con_id, bit, parents, \ + &CKEN, CKEN_ ## bit, CLK_IGNORE_UNUSED) + +static struct pxa_clk_cken pxa27x_clocks[] = { + PXA27X_PBUS_CKEN("pxa2xx-uart.0", NULL, FFUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-uart.1", NULL, BTUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-uart.2", NULL, STUART, 2, 42, 1), + PXA27X_PBUS_CKEN("pxa2xx-i2s", NULL, I2S, 2, 51, 0), + PXA27X_PBUS_CKEN("pxa2xx-i2c.0", NULL, I2C, 2, 19, 0), + PXA27X_PBUS_CKEN("pxa27x-udc", NULL, USB, 2, 13, 5), + PXA27X_PBUS_CKEN("pxa2xx-mci.0", NULL, MMC, 2, 32, 0), + PXA27X_PBUS_CKEN("pxa2xx-ir", "FICPCLK", FICP, 2, 13, 0), + PXA27X_PBUS_CKEN("pxa27x-ohci", NULL, USBHOST, 2, 13, 0), + PXA27X_PBUS_CKEN("pxa2xx-i2c.1", NULL, PWRI2C, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.0", NULL, SSP1, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.1", NULL, SSP2, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-ssp.2", NULL, SSP3, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-pwm.0", NULL, PWM0, 1, 24, 0), + PXA27X_PBUS_CKEN("pxa27x-pwm.1", NULL, PWM1, 1, 24, 0), + PXA27X_PBUS_CKEN(NULL, "MSLCLK", MSL, 2, 13, 0), + PXA27X_PBUS_CKEN(NULL, "USIMCLK", USIM, 2, 13, 0), + PXA27X_PBUS_CKEN(NULL, "MSTKCLK", MEMSTK, 2, 32, 0), + PXA27X_PBUS_CKEN(NULL, "AC97CLK", AC97, 1, 1, 0), + PXA27X_PBUS_CKEN(NULL, "AC97CONFCLK", AC97CONF, 1, 1, 0), + PXA27X_PBUS_CKEN(NULL, "OSTIMER0", OSTIMER, 1, 96, 0), + + PXA27X_CKEN_1RATE("pxa27x-keypad", NULL, KEYPAD, + pxa27x_32Mhz_bus_parents, 0), + PXA27X_CKEN_1RATE(NULL, "IMCLK", IM, pxa27x_sbus_parents, 0), + PXA27X_CKEN_1RATE("pxa2xx-fb", NULL, LCD, pxa27x_lcd_bus_parents, 0), + PXA27X_CKEN_1RATE("pxa27x-camera.0", NULL, CAMERA, + pxa27x_lcd_bus_parents, 0), + PXA27X_CKEN_1RATE_AO("pxa2xx-pcmcia", NULL, MEMC, + pxa27x_membus_parents, 0), + +}; + +static unsigned long clk_pxa27x_cpll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int t, ht; + unsigned int l, L, n2, N; + unsigned long ccsr = CCSR; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + + l = ccsr & CCSR_L_MASK; + n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT; + L = l * parent_rate; + N = (L * n2) / 2; + + return t ? N : L; +} +PARENTS(clk_pxa27x_cpll) = { "osc_13mhz" }; +RATE_RO_OPS(clk_pxa27x_cpll, "cpll"); + +static unsigned long clk_pxa27x_lcd_base_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int l, osc_forced; + unsigned long ccsr = CCSR; + unsigned long cccr = CCCR; + + l = ccsr & CCSR_L_MASK; + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) { + if (cccr & (1 << CCCR_LCD_26_BIT)) + return parent_rate * 2; + else + return parent_rate; + } + + if (l <= 7) + return parent_rate; + if (l <= 16) + return parent_rate / 2; + return parent_rate / 4; +} + +static u8 clk_pxa27x_lcd_base_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_LCD_13Mhz; + else + return PXA_LCD_RUN; +} + +PARENTS(clk_pxa27x_lcd_base) = { "osc_13mhz", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_lcd_base, "lcd_base"); + +static void __init pxa27x_register_plls(void) +{ + clk_register_fixed_rate(NULL, "osc_13mhz", NULL, + CLK_GET_RATE_NOCACHE | CLK_IS_ROOT, + 13 * MHz); + clk_register_fixed_rate(NULL, "osc_32_768khz", NULL, + CLK_GET_RATE_NOCACHE | CLK_IS_ROOT, + 32768 * KHz); + clk_register_fixed_rate(NULL, "clk_dummy", NULL, CLK_IS_ROOT, 0); + clk_register_fixed_factor(NULL, "ppll_312mhz", "osc_13mhz", 0, 24, 1); +} + +static unsigned long clk_pxa27x_core_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int t, ht, b, osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + b = clkcfg & (1 << 3); + + if (osc_forced) + return parent_rate; + if (ht) + return parent_rate / 2; + else + return parent_rate; +} + +static u8 clk_pxa27x_core_get_parent(struct clk_hw *hw) +{ + unsigned long clkcfg; + unsigned int t, ht, b, osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_CORE_13Mhz; + + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + t = clkcfg & (1 << 0); + ht = clkcfg & (1 << 2); + b = clkcfg & (1 << 3); + + if (ht || t) + return PXA_CORE_TURBO; + return PXA_CORE_RUN; +} +PARENTS(clk_pxa27x_core) = { "osc_13mhz", "run", "cpll" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_core, "core"); + +static unsigned long clk_pxa27x_run_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long ccsr = CCSR; + unsigned int n2 = (ccsr & CCSR_N2_MASK) >> CCSR_N2_SHIFT; + + return (parent_rate / n2) * 2; +} +PARENTS(clk_pxa27x_run) = { "cpll" }; +RATE_RO_OPS(clk_pxa27x_run, "run"); + +static void __init pxa27x_register_core(void) +{ + clk_register_clk_pxa27x_cpll(); + clk_register_clk_pxa27x_run(); + + clkdev_pxa_register(CLK_CORE, "core", NULL, + clk_register_clk_pxa27x_core()); +} + +static unsigned long clk_pxa27x_system_bus_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned long clkcfg; + unsigned int b, osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + asm("mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg)); + b = clkcfg & (1 << 3); + + if (osc_forced) + return parent_rate; + if (b) + return parent_rate / 2; + else + return parent_rate; +} + +static u8 clk_pxa27x_system_bus_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + if (osc_forced) + return PXA_BUS_13Mhz; + else + return PXA_BUS_RUN; +} + +PARENTS(clk_pxa27x_system_bus) = { "osc_13mhz", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_system_bus, "system_bus"); + +static unsigned long clk_pxa27x_memory_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + unsigned int a, l, osc_forced; + unsigned long cccr = CCCR; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + a = cccr & CCCR_A_BIT; + l = ccsr & CCSR_L_MASK; + + if (osc_forced || a) + return parent_rate; + if (l <= 10) + return parent_rate; + if (l <= 20) + return parent_rate / 2; + return parent_rate / 4; +} + +static u8 clk_pxa27x_memory_get_parent(struct clk_hw *hw) +{ + unsigned int osc_forced, a; + unsigned long cccr = CCCR; + unsigned long ccsr = CCSR; + + osc_forced = ccsr & (1 << CCCR_CPDIS_BIT); + a = cccr & CCCR_A_BIT; + if (osc_forced) + return PXA_MEM_13Mhz; + if (a) + return PXA_MEM_SYSTEM_BUS; + else + return PXA_MEM_RUN; +} + +PARENTS(clk_pxa27x_memory) = { "osc_13mhz", "system_bus", "run" }; +MUX_RO_RATE_RO_OPS(clk_pxa27x_memory, "memory"); + +static void __init pxa27x_base_clocks_init(void) +{ + pxa27x_register_plls(); + pxa27x_register_core(); + clk_register_clk_pxa27x_system_bus(); + clk_register_clk_pxa27x_memory(); + clk_register_clk_pxa27x_lcd_base(); +} + +static int __init pxa27x_clocks_init(void) +{ + pxa27x_base_clocks_init(); + return clk_pxa_cken_init(pxa27x_clocks, ARRAY_SIZE(pxa27x_clocks)); +} +postcore_initcall(pxa27x_clocks_init); diff --git a/drivers/clk/qcom/clk-pll.c b/drivers/clk/qcom/clk-pll.c index 9db03d3b165..b823bc3b625 100644 --- a/drivers/clk/qcom/clk-pll.c +++ b/drivers/clk/qcom/clk-pll.c @@ -97,7 +97,7 @@ static unsigned long clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pll *pll = to_clk_pll(hw); - u32 l, m, n; + u32 l, m, n, config; unsigned long rate; u64 tmp; @@ -116,13 +116,79 @@ clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) do_div(tmp, n); rate += tmp; } + if (pll->post_div_width) { + regmap_read(pll->clkr.regmap, pll->config_reg, &config); + config >>= pll->post_div_shift; + config &= BIT(pll->post_div_width) - 1; + rate /= config + 1; + } + return rate; } +static const +struct pll_freq_tbl *find_freq(const struct pll_freq_tbl *f, unsigned long rate) +{ + if (!f) + return NULL; + + for (; f->freq; f++) + if (rate <= f->freq) + return f; + + return NULL; +} + +static long +clk_pll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *p_rate, struct clk **p) +{ + struct clk_pll *pll = to_clk_pll(hw); + const struct pll_freq_tbl *f; + + f = find_freq(pll->freq_tbl, rate); + if (!f) + return clk_pll_recalc_rate(hw, *p_rate); + + return f->freq; +} + +static int +clk_pll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + const struct pll_freq_tbl *f; + bool enabled; + u32 mode; + u32 enable_mask = PLL_OUTCTRL | PLL_BYPASSNL | PLL_RESET_N; + + f = find_freq(pll->freq_tbl, rate); + if (!f) + return -EINVAL; + + regmap_read(pll->clkr.regmap, pll->mode_reg, &mode); + enabled = (mode & enable_mask) == enable_mask; + + if (enabled) + clk_pll_disable(hw); + + regmap_update_bits(pll->clkr.regmap, pll->l_reg, 0x3ff, f->l); + regmap_update_bits(pll->clkr.regmap, pll->m_reg, 0x7ffff, f->m); + regmap_update_bits(pll->clkr.regmap, pll->n_reg, 0x7ffff, f->n); + regmap_write(pll->clkr.regmap, pll->config_reg, f->ibits); + + if (enabled) + clk_pll_enable(hw); + + return 0; +} + const struct clk_ops clk_pll_ops = { .enable = clk_pll_enable, .disable = clk_pll_disable, .recalc_rate = clk_pll_recalc_rate, + .determine_rate = clk_pll_determine_rate, + .set_rate = clk_pll_set_rate, }; EXPORT_SYMBOL_GPL(clk_pll_ops); diff --git a/drivers/clk/qcom/clk-pll.h b/drivers/clk/qcom/clk-pll.h index 3003e996247..c9c0cda306d 100644 --- a/drivers/clk/qcom/clk-pll.h +++ b/drivers/clk/qcom/clk-pll.h @@ -18,6 +18,21 @@ #include "clk-regmap.h" /** + * struct pll_freq_tbl - PLL frequency table + * @l: L value + * @m: M value + * @n: N value + * @ibits: internal values + */ +struct pll_freq_tbl { + unsigned long freq; + u16 l; + u16 m; + u16 n; + u32 ibits; +}; + +/** * struct clk_pll - phase locked loop (PLL) * @l_reg: L register * @m_reg: M register @@ -26,6 +41,7 @@ * @mode_reg: mode register * @status_reg: status register * @status_bit: ANDed with @status_reg to determine if PLL is enabled + * @freq_tbl: PLL frequency table * @hw: handle between common and hardware-specific interfaces */ struct clk_pll { @@ -36,6 +52,10 @@ struct clk_pll { u32 mode_reg; u32 status_reg; u8 status_bit; + u8 post_div_width; + u8 post_div_shift; + + const struct pll_freq_tbl *freq_tbl; struct clk_regmap clkr; }; diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c index b638c5846db..b6e6959e89a 100644 --- a/drivers/clk/qcom/clk-rcg.c +++ b/drivers/clk/qcom/clk-rcg.c @@ -21,6 +21,7 @@ #include <asm/div64.h> #include "clk-rcg.h" +#include "common.h" static u32 ns_to_src(struct src_sel *s, u32 ns) { @@ -67,16 +68,16 @@ static u8 clk_dyn_rcg_get_parent(struct clk_hw *hw) { struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw); int num_parents = __clk_get_num_parents(hw->clk); - u32 ns, ctl; + u32 ns, reg; int bank; int i; struct src_sel *s; - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl); - bank = reg_to_bank(rcg, ctl); + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + bank = reg_to_bank(rcg, reg); s = &rcg->s[bank]; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); + regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); ns = ns_to_src(s, ns); for (i = 0; i < num_parents; i++) @@ -192,90 +193,93 @@ static u32 mn_to_reg(struct mn *mn, u32 m, u32 n, u32 val) static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f) { - u32 ns, md, ctl, *regp; + u32 ns, md, reg; int bank, new_bank; struct mn *mn; struct pre_div *p; struct src_sel *s; bool enabled; - u32 md_reg; - u32 bank_reg; + u32 md_reg, ns_reg; bool banked_mn = !!rcg->mn[1].width; + bool banked_p = !!rcg->p[1].pre_div_width; struct clk_hw *hw = &rcg->clkr.hw; enabled = __clk_is_enabled(hw->clk); - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl); - - if (banked_mn) { - regp = &ctl; - bank_reg = rcg->clkr.enable_reg; - } else { - regp = &ns; - bank_reg = rcg->ns_reg; - } - - bank = reg_to_bank(rcg, *regp); + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + bank = reg_to_bank(rcg, reg); new_bank = enabled ? !bank : bank; + ns_reg = rcg->ns_reg[new_bank]; + regmap_read(rcg->clkr.regmap, ns_reg, &ns); + if (banked_mn) { mn = &rcg->mn[new_bank]; md_reg = rcg->md_reg[new_bank]; ns |= BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); regmap_read(rcg->clkr.regmap, md_reg, &md); md = mn_to_md(mn, f->m, f->n, md); regmap_write(rcg->clkr.regmap, md_reg, md); ns = mn_to_ns(mn, f->m, f->n, ns); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); - ctl = mn_to_reg(mn, f->m, f->n, ctl); - regmap_write(rcg->clkr.regmap, rcg->clkr.enable_reg, ctl); + /* Two NS registers means mode control is in NS register */ + if (rcg->ns_reg[0] != rcg->ns_reg[1]) { + ns = mn_to_reg(mn, f->m, f->n, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); + } else { + reg = mn_to_reg(mn, f->m, f->n, reg); + regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); + } ns &= ~BIT(mn->mnctr_reset_bit); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); - } else { + regmap_write(rcg->clkr.regmap, ns_reg, ns); + } + + if (banked_p) { p = &rcg->p[new_bank]; ns = pre_div_to_ns(p, f->pre_div - 1, ns); } s = &rcg->s[new_bank]; ns = src_to_ns(s, s->parent_map[f->src], ns); - regmap_write(rcg->clkr.regmap, rcg->ns_reg, ns); + regmap_write(rcg->clkr.regmap, ns_reg, ns); if (enabled) { - *regp ^= BIT(rcg->mux_sel_bit); - regmap_write(rcg->clkr.regmap, bank_reg, *regp); + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); + reg ^= BIT(rcg->mux_sel_bit); + regmap_write(rcg->clkr.regmap, rcg->bank_reg, reg); } } static int clk_dyn_rcg_set_parent(struct clk_hw *hw, u8 index) { struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw); - u32 ns, ctl, md, reg; + u32 ns, md, reg; int bank; struct freq_tbl f = { 0 }; bool banked_mn = !!rcg->mn[1].width; + bool banked_p = !!rcg->p[1].pre_div_width; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, &ctl); - reg = banked_mn ? ctl : ns; - + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); bank = reg_to_bank(rcg, reg); + regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); + if (banked_mn) { regmap_read(rcg->clkr.regmap, rcg->md_reg[bank], &md); f.m = md_to_m(&rcg->mn[bank], md); f.n = ns_m_to_n(&rcg->mn[bank], ns, f.m); - } else { - f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1; } - f.src = index; + if (banked_p) + f.pre_div = ns_to_pre_div(&rcg->p[bank], ns) + 1; + + f.src = index; configure_bank(rcg, &f); return 0; @@ -336,41 +340,30 @@ clk_dyn_rcg_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) u32 m, n, pre_div, ns, md, mode, reg; int bank; struct mn *mn; + bool banked_p = !!rcg->p[1].pre_div_width; bool banked_mn = !!rcg->mn[1].width; - regmap_read(rcg->clkr.regmap, rcg->ns_reg, &ns); - - if (banked_mn) - regmap_read(rcg->clkr.regmap, rcg->clkr.enable_reg, ®); - else - reg = ns; - + regmap_read(rcg->clkr.regmap, rcg->bank_reg, ®); bank = reg_to_bank(rcg, reg); + regmap_read(rcg->clkr.regmap, rcg->ns_reg[bank], &ns); + m = n = pre_div = mode = 0; + if (banked_mn) { mn = &rcg->mn[bank]; regmap_read(rcg->clkr.regmap, rcg->md_reg[bank], &md); m = md_to_m(mn, md); n = ns_m_to_n(mn, ns, m); + /* Two NS registers means mode control is in NS register */ + if (rcg->ns_reg[0] != rcg->ns_reg[1]) + reg = ns; mode = reg_to_mnctr_mode(mn, reg); - return calc_rate(parent_rate, m, n, mode, 0); - } else { - pre_div = ns_to_pre_div(&rcg->p[bank], ns); - return calc_rate(parent_rate, 0, 0, 0, pre_div); } -} -static const -struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate) -{ - if (!f) - return NULL; - - for (; f->freq; f++) - if (rate <= f->freq) - return f; + if (banked_p) + pre_div = ns_to_pre_div(&rcg->p[bank], ns); - return NULL; + return calc_rate(parent_rate, m, n, mode, pre_div); } static long _freq_tbl_determine_rate(struct clk_hw *hw, @@ -379,7 +372,7 @@ static long _freq_tbl_determine_rate(struct clk_hw *hw, { unsigned long clk_flags; - f = find_freq(f, rate); + f = qcom_find_freq(f, rate); if (!f) return -EINVAL; @@ -477,7 +470,7 @@ static int clk_rcg_set_rate(struct clk_hw *hw, unsigned long rate, struct clk_rcg *rcg = to_clk_rcg(hw); const struct freq_tbl *f; - f = find_freq(rcg->freq_tbl, rate); + f = qcom_find_freq(rcg->freq_tbl, rate); if (!f) return -EINVAL; @@ -497,7 +490,7 @@ static int __clk_dyn_rcg_set_rate(struct clk_hw *hw, unsigned long rate) struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw); const struct freq_tbl *f; - f = find_freq(rcg->freq_tbl, rate); + f = qcom_find_freq(rcg->freq_tbl, rate); if (!f) return -EINVAL; diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h index ba0523cefd2..687e41f91d7 100644 --- a/drivers/clk/qcom/clk-rcg.h +++ b/drivers/clk/qcom/clk-rcg.h @@ -103,8 +103,9 @@ extern const struct clk_ops clk_rcg_bypass_ops; * struct clk_dyn_rcg - root clock generator with glitch free mux * * @mux_sel_bit: bit to switch glitch free mux - * @ns_reg: NS register + * @ns_reg: NS0 and NS1 register * @md_reg: MD0 and MD1 register + * @bank_reg: register to XOR @mux_sel_bit into to switch glitch free mux * @mn: mn counter (banked) * @s: source selector (banked) * @freq_tbl: frequency table @@ -113,8 +114,9 @@ extern const struct clk_ops clk_rcg_bypass_ops; * */ struct clk_dyn_rcg { - u32 ns_reg; + u32 ns_reg[2]; u32 md_reg[2]; + u32 bank_reg; u8 mux_sel_bit; diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index cd185d5cc67..cfa9eb4fe9c 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -24,6 +24,7 @@ #include <asm/div64.h> #include "clk-rcg.h" +#include "common.h" #define CMD_REG 0x0 #define CMD_UPDATE BIT(0) @@ -172,27 +173,13 @@ clk_rcg2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) return calc_rate(parent_rate, m, n, mode, hid_div); } -static const -struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate) -{ - if (!f) - return NULL; - - for (; f->freq; f++) - if (rate <= f->freq) - return f; - - /* Default to our fastest rate */ - return f - 1; -} - static long _freq_tbl_determine_rate(struct clk_hw *hw, const struct freq_tbl *f, unsigned long rate, unsigned long *p_rate, struct clk **p) { unsigned long clk_flags; - f = find_freq(f, rate); + f = qcom_find_freq(f, rate); if (!f) return -EINVAL; @@ -268,7 +255,7 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate) struct clk_rcg2 *rcg = to_clk_rcg2(hw); const struct freq_tbl *f; - f = find_freq(rcg->freq_tbl, rate); + f = qcom_find_freq(rcg->freq_tbl, rate); if (!f) return -EINVAL; diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c index eeb3eea01f4..e20d947db3e 100644 --- a/drivers/clk/qcom/common.c +++ b/drivers/clk/qcom/common.c @@ -18,6 +18,7 @@ #include <linux/reset-controller.h> #include "common.h" +#include "clk-rcg.h" #include "clk-regmap.h" #include "reset.h" @@ -27,6 +28,21 @@ struct qcom_cc { struct clk *clks[]; }; +const +struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, unsigned long rate) +{ + if (!f) + return NULL; + + for (; f->freq; f++) + if (rate <= f->freq) + return f; + + /* Default to our fastest rate */ + return f - 1; +} +EXPORT_SYMBOL_GPL(qcom_find_freq); + struct regmap * qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc) { diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h index 2765e9d3da9..f519322acdf 100644 --- a/drivers/clk/qcom/common.h +++ b/drivers/clk/qcom/common.h @@ -18,6 +18,7 @@ struct regmap_config; struct clk_regmap; struct qcom_reset_map; struct regmap; +struct freq_tbl; struct qcom_cc_desc { const struct regmap_config *config; @@ -27,6 +28,9 @@ struct qcom_cc_desc { size_t num_resets; }; +extern const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, + unsigned long rate); + extern struct regmap *qcom_cc_map(struct platform_device *pdev, const struct qcom_cc_desc *desc); extern int qcom_cc_really_probe(struct platform_device *pdev, diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c index 3b83b7dd78c..5cd62a709ac 100644 --- a/drivers/clk/qcom/gcc-ipq806x.c +++ b/drivers/clk/qcom/gcc-ipq806x.c @@ -32,6 +32,33 @@ #include "clk-branch.h" #include "reset.h" +static struct clk_pll pll0 = { + .l_reg = 0x30c4, + .m_reg = 0x30c8, + .n_reg = 0x30cc, + .config_reg = 0x30d4, + .mode_reg = 0x30c0, + .status_reg = 0x30d8, + .status_bit = 16, + .clkr.hw.init = &(struct clk_init_data){ + .name = "pll0", + .parent_names = (const char *[]){ "pxo" }, + .num_parents = 1, + .ops = &clk_pll_ops, + }, +}; + +static struct clk_regmap pll0_vote = { + .enable_reg = 0x34c0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "pll0_vote", + .parent_names = (const char *[]){ "pll0" }, + .num_parents = 1, + .ops = &clk_pll_vote_ops, + }, +}; + static struct clk_pll pll3 = { .l_reg = 0x3164, .m_reg = 0x3168, @@ -154,7 +181,7 @@ static const u8 gcc_pxo_pll8_pll0[] = { static const char *gcc_pxo_pll8_pll0_map[] = { "pxo", "pll8_vote", - "pll0", + "pll0_vote", }; static struct freq_tbl clk_tbl_gsbi_uart[] = { @@ -2133,6 +2160,8 @@ static struct clk_branch usb_fs1_h_clk = { }; static struct clk_regmap *gcc_ipq806x_clks[] = { + [PLL0] = &pll0.clkr, + [PLL0_VOTE] = &pll0_vote, [PLL3] = &pll3.clkr, [PLL8] = &pll8.clkr, [PLL8_VOTE] = &pll8_vote, diff --git a/drivers/clk/qcom/mmcc-apq8084.c b/drivers/clk/qcom/mmcc-apq8084.c index 751eea376a2..dab988ab8cf 100644 --- a/drivers/clk/qcom/mmcc-apq8084.c +++ b/drivers/clk/qcom/mmcc-apq8084.c @@ -3341,7 +3341,6 @@ static struct platform_driver mmcc_apq8084_driver = { .remove = mmcc_apq8084_remove, .driver = { .name = "mmcc-apq8084", - .owner = THIS_MODULE, .of_match_table = mmcc_apq8084_match_table, }, }; diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c index 2e80a219b8e..e8b33bbc362 100644 --- a/drivers/clk/qcom/mmcc-msm8960.c +++ b/drivers/clk/qcom/mmcc-msm8960.c @@ -773,9 +773,11 @@ static struct freq_tbl clk_tbl_gfx2d[] = { }; static struct clk_dyn_rcg gfx2d0_src = { - .ns_reg = 0x0070, + .ns_reg[0] = 0x0070, + .ns_reg[1] = 0x0070, .md_reg[0] = 0x0064, .md_reg[1] = 0x0068, + .bank_reg = 0x0060, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 25, @@ -831,9 +833,11 @@ static struct clk_branch gfx2d0_clk = { }; static struct clk_dyn_rcg gfx2d1_src = { - .ns_reg = 0x007c, + .ns_reg[0] = 0x007c, + .ns_reg[1] = 0x007c, .md_reg[0] = 0x0078, .md_reg[1] = 0x006c, + .bank_reg = 0x0074, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 25, @@ -930,9 +934,11 @@ static struct freq_tbl clk_tbl_gfx3d_8064[] = { }; static struct clk_dyn_rcg gfx3d_src = { - .ns_reg = 0x008c, + .ns_reg[0] = 0x008c, + .ns_reg[1] = 0x008c, .md_reg[0] = 0x0084, .md_reg[1] = 0x0088, + .bank_reg = 0x0080, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 25, @@ -1006,9 +1012,11 @@ static struct freq_tbl clk_tbl_vcap[] = { }; static struct clk_dyn_rcg vcap_src = { - .ns_reg = 0x021c, + .ns_reg[0] = 0x021c, + .ns_reg[1] = 0x021c, .md_reg[0] = 0x01ec, .md_reg[1] = 0x0218, + .bank_reg = 0x0178, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 23, @@ -1211,9 +1219,11 @@ static struct freq_tbl clk_tbl_mdp[] = { }; static struct clk_dyn_rcg mdp_src = { - .ns_reg = 0x00d0, + .ns_reg[0] = 0x00d0, + .ns_reg[1] = 0x00d0, .md_reg[0] = 0x00c4, .md_reg[1] = 0x00c8, + .bank_reg = 0x00c0, .mn[0] = { .mnctr_en_bit = 8, .mnctr_reset_bit = 31, @@ -1318,7 +1328,9 @@ static struct freq_tbl clk_tbl_rot[] = { }; static struct clk_dyn_rcg rot_src = { - .ns_reg = 0x00e8, + .ns_reg[0] = 0x00e8, + .ns_reg[1] = 0x00e8, + .bank_reg = 0x00e8, .p[0] = { .pre_div_shift = 22, .pre_div_width = 4, @@ -1542,9 +1554,11 @@ static struct freq_tbl clk_tbl_vcodec[] = { }; static struct clk_dyn_rcg vcodec_src = { - .ns_reg = 0x0100, + .ns_reg[0] = 0x0100, + .ns_reg[1] = 0x0100, .md_reg[0] = 0x00fc, .md_reg[1] = 0x0128, + .bank_reg = 0x00f8, .mn[0] = { .mnctr_en_bit = 5, .mnctr_reset_bit = 31, @@ -2679,7 +2693,6 @@ static struct platform_driver mmcc_msm8960_driver = { .remove = mmcc_msm8960_remove, .driver = { .name = "mmcc-msm8960", - .owner = THIS_MODULE, .of_match_table = mmcc_msm8960_match_table, }, }; diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c index bc8f519c47a..be94c54a9a4 100644 --- a/drivers/clk/qcom/mmcc-msm8974.c +++ b/drivers/clk/qcom/mmcc-msm8974.c @@ -2570,7 +2570,6 @@ static struct platform_driver mmcc_msm8974_driver = { .remove = mmcc_msm8974_remove, .driver = { .name = "mmcc-msm8974", - .owner = THIS_MODULE, .of_match_table = mmcc_msm8974_match_table, }, }; diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile index ee6b077381e..bd8514d6363 100644 --- a/drivers/clk/rockchip/Makefile +++ b/drivers/clk/rockchip/Makefile @@ -5,6 +5,7 @@ obj-y += clk-rockchip.o obj-y += clk.o obj-y += clk-pll.o +obj-y += clk-cpu.o obj-$(CONFIG_RESET_CONTROLLER) += softrst.o obj-y += clk-rk3188.o diff --git a/drivers/clk/rockchip/clk-cpu.c b/drivers/clk/rockchip/clk-cpu.c new file mode 100644 index 00000000000..75c8c45ef72 --- /dev/null +++ b/drivers/clk/rockchip/clk-cpu.c @@ -0,0 +1,329 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Heiko Stuebner <heiko@sntech.de> + * + * based on clk/samsung/clk-cpu.c + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * Author: Thomas Abraham <thomas.ab@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * A CPU clock is defined as a clock supplied to a CPU or a group of CPUs. + * The CPU clock is typically derived from a hierarchy of clock + * blocks which includes mux and divider blocks. There are a number of other + * auxiliary clocks supplied to the CPU domain such as the debug blocks and AXI + * clock for CPU domain. The rates of these auxiliary clocks are related to the + * CPU clock rate and this relation is usually specified in the hardware manual + * of the SoC or supplied after the SoC characterization. + * + * The below implementation of the CPU clock allows the rate changes of the CPU + * clock and the corresponding rate changes of the auxillary clocks of the CPU + * domain. The platform clock driver provides a clock register configuration + * for each configurable rate which is then used to program the clock hardware + * registers to acheive a fast co-oridinated rate change for all the CPU domain + * clocks. + * + * On a rate change request for the CPU clock, the rate change is propagated + * upto the PLL supplying the clock to the CPU domain clock blocks. While the + * CPU domain PLL is reconfigured, the CPU domain clocks are driven using an + * alternate clock source. If required, the alternate clock source is divided + * down in order to keep the output clock rate within the previous OPP limits. + */ + +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/clk-provider.h> +#include "clk.h" + +/** + * struct rockchip_cpuclk: information about clock supplied to a CPU core. + * @hw: handle between ccf and cpu clock. + * @alt_parent: alternate parent clock to use when switching the speed + * of the primary parent clock. + * @reg_base: base register for cpu-clock values. + * @clk_nb: clock notifier registered for changes in clock speed of the + * primary parent clock. + * @rate_count: number of rates in the rate_table + * @rate_table: pll-rates and their associated dividers + * @reg_data: cpu-specific register settings + * @lock: clock lock + */ +struct rockchip_cpuclk { + struct clk_hw hw; + + struct clk_mux cpu_mux; + const struct clk_ops *cpu_mux_ops; + + struct clk *alt_parent; + void __iomem *reg_base; + struct notifier_block clk_nb; + unsigned int rate_count; + struct rockchip_cpuclk_rate_table *rate_table; + const struct rockchip_cpuclk_reg_data *reg_data; + spinlock_t *lock; +}; + +#define to_rockchip_cpuclk_hw(hw) container_of(hw, struct rockchip_cpuclk, hw) +#define to_rockchip_cpuclk_nb(nb) \ + container_of(nb, struct rockchip_cpuclk, clk_nb) + +static const struct rockchip_cpuclk_rate_table *rockchip_get_cpuclk_settings( + struct rockchip_cpuclk *cpuclk, unsigned long rate) +{ + const struct rockchip_cpuclk_rate_table *rate_table = + cpuclk->rate_table; + int i; + + for (i = 0; i < cpuclk->rate_count; i++) { + if (rate == rate_table[i].prate) + return &rate_table[i]; + } + + return NULL; +} + +static unsigned long rockchip_cpuclk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rockchip_cpuclk *cpuclk = to_rockchip_cpuclk_hw(hw); + const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data; + u32 clksel0 = readl_relaxed(cpuclk->reg_base + reg_data->core_reg); + + clksel0 >>= reg_data->div_core_shift; + clksel0 &= reg_data->div_core_mask; + return parent_rate / (clksel0 + 1); +} + +static const struct clk_ops rockchip_cpuclk_ops = { + .recalc_rate = rockchip_cpuclk_recalc_rate, +}; + +static void rockchip_cpuclk_set_dividers(struct rockchip_cpuclk *cpuclk, + const struct rockchip_cpuclk_rate_table *rate) +{ + int i; + + /* alternate parent is active now. set the dividers */ + for (i = 0; i < ARRAY_SIZE(rate->divs); i++) { + const struct rockchip_cpuclk_clksel *clksel = &rate->divs[i]; + + if (!clksel->reg) + continue; + + pr_debug("%s: setting reg 0x%x to 0x%x\n", + __func__, clksel->reg, clksel->val); + writel(clksel->val , cpuclk->reg_base + clksel->reg); + } +} + +static int rockchip_cpuclk_pre_rate_change(struct rockchip_cpuclk *cpuclk, + struct clk_notifier_data *ndata) +{ + const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data; + unsigned long alt_prate, alt_div; + + alt_prate = clk_get_rate(cpuclk->alt_parent); + + spin_lock(cpuclk->lock); + + /* + * If the old parent clock speed is less than the clock speed + * of the alternate parent, then it should be ensured that at no point + * the armclk speed is more than the old_rate until the dividers are + * set. + */ + if (alt_prate > ndata->old_rate) { + /* calculate dividers */ + alt_div = DIV_ROUND_UP(alt_prate, ndata->old_rate) - 1; + if (alt_div > reg_data->div_core_mask) { + pr_warn("%s: limiting alt-divider %lu to %d\n", + __func__, alt_div, reg_data->div_core_mask); + alt_div = reg_data->div_core_mask; + } + + /* + * Change parents and add dividers in a single transaction. + * + * NOTE: we do this in a single transaction so we're never + * dividing the primary parent by the extra dividers that were + * needed for the alt. + */ + pr_debug("%s: setting div %lu as alt-rate %lu > old-rate %lu\n", + __func__, alt_div, alt_prate, ndata->old_rate); + + writel(HIWORD_UPDATE(alt_div, reg_data->div_core_mask, + reg_data->div_core_shift) | + HIWORD_UPDATE(1, 1, reg_data->mux_core_shift), + cpuclk->reg_base + reg_data->core_reg); + } else { + /* select alternate parent */ + writel(HIWORD_UPDATE(1, 1, reg_data->mux_core_shift), + cpuclk->reg_base + reg_data->core_reg); + } + + spin_unlock(cpuclk->lock); + return 0; +} + +static int rockchip_cpuclk_post_rate_change(struct rockchip_cpuclk *cpuclk, + struct clk_notifier_data *ndata) +{ + const struct rockchip_cpuclk_reg_data *reg_data = cpuclk->reg_data; + const struct rockchip_cpuclk_rate_table *rate; + + rate = rockchip_get_cpuclk_settings(cpuclk, ndata->new_rate); + if (!rate) { + pr_err("%s: Invalid rate : %lu for cpuclk\n", + __func__, ndata->new_rate); + return -EINVAL; + } + + spin_lock(cpuclk->lock); + + if (ndata->old_rate < ndata->new_rate) + rockchip_cpuclk_set_dividers(cpuclk, rate); + + /* + * post-rate change event, re-mux to primary parent and remove dividers. + * + * NOTE: we do this in a single transaction so we're never dividing the + * primary parent by the extra dividers that were needed for the alt. + */ + + writel(HIWORD_UPDATE(0, reg_data->div_core_mask, + reg_data->div_core_shift) | + HIWORD_UPDATE(0, 1, reg_data->mux_core_shift), + cpuclk->reg_base + reg_data->core_reg); + + if (ndata->old_rate > ndata->new_rate) + rockchip_cpuclk_set_dividers(cpuclk, rate); + + spin_unlock(cpuclk->lock); + return 0; +} + +/* + * This clock notifier is called when the frequency of the parent clock + * of cpuclk is to be changed. This notifier handles the setting up all + * the divider clocks, remux to temporary parent and handling the safe + * frequency levels when using temporary parent. + */ +static int rockchip_cpuclk_notifier_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct rockchip_cpuclk *cpuclk = to_rockchip_cpuclk_nb(nb); + int ret = 0; + + pr_debug("%s: event %lu, old_rate %lu, new_rate: %lu\n", + __func__, event, ndata->old_rate, ndata->new_rate); + if (event == PRE_RATE_CHANGE) + ret = rockchip_cpuclk_pre_rate_change(cpuclk, ndata); + else if (event == POST_RATE_CHANGE) + ret = rockchip_cpuclk_post_rate_change(cpuclk, ndata); + + return notifier_from_errno(ret); +} + +struct clk *rockchip_clk_register_cpuclk(const char *name, + const char **parent_names, u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates, void __iomem *reg_base, spinlock_t *lock) +{ + struct rockchip_cpuclk *cpuclk; + struct clk_init_data init; + struct clk *clk, *cclk; + int ret; + + if (num_parents != 2) { + pr_err("%s: needs two parent clocks\n", __func__); + return ERR_PTR(-EINVAL); + } + + cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); + if (!cpuclk) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.parent_names = &parent_names[0]; + init.num_parents = 1; + init.ops = &rockchip_cpuclk_ops; + + /* only allow rate changes when we have a rate table */ + init.flags = (nrates > 0) ? CLK_SET_RATE_PARENT : 0; + + /* disallow automatic parent changes by ccf */ + init.flags |= CLK_SET_RATE_NO_REPARENT; + + init.flags |= CLK_GET_RATE_NOCACHE; + + cpuclk->reg_base = reg_base; + cpuclk->lock = lock; + cpuclk->reg_data = reg_data; + cpuclk->clk_nb.notifier_call = rockchip_cpuclk_notifier_cb; + cpuclk->hw.init = &init; + + cpuclk->alt_parent = __clk_lookup(parent_names[1]); + if (!cpuclk->alt_parent) { + pr_err("%s: could not lookup alternate parent\n", + __func__); + ret = -EINVAL; + goto free_cpuclk; + } + + ret = clk_prepare_enable(cpuclk->alt_parent); + if (ret) { + pr_err("%s: could not enable alternate parent\n", + __func__); + goto free_cpuclk; + } + + clk = __clk_lookup(parent_names[0]); + if (!clk) { + pr_err("%s: could not lookup parent clock %s\n", + __func__, parent_names[0]); + ret = -EINVAL; + goto free_cpuclk; + } + + ret = clk_notifier_register(clk, &cpuclk->clk_nb); + if (ret) { + pr_err("%s: failed to register clock notifier for %s\n", + __func__, name); + goto free_cpuclk; + } + + if (nrates > 0) { + cpuclk->rate_count = nrates; + cpuclk->rate_table = kmemdup(rates, + sizeof(*rates) * nrates, + GFP_KERNEL); + if (!cpuclk->rate_table) { + pr_err("%s: could not allocate memory for cpuclk rates\n", + __func__); + ret = -ENOMEM; + goto unregister_notifier; + } + } + + cclk = clk_register(NULL, &cpuclk->hw); + if (IS_ERR(clk)) { + pr_err("%s: could not register cpuclk %s\n", __func__, name); + ret = PTR_ERR(clk); + goto free_rate_table; + } + + return cclk; + +free_rate_table: + kfree(cpuclk->rate_table); +unregister_notifier: + clk_notifier_unregister(clk, &cpuclk->clk_nb); +free_cpuclk: + kfree(cpuclk); + return ERR_PTR(ret); +} diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c index f2a1c7abf4d..a3e886a3848 100644 --- a/drivers/clk/rockchip/clk-pll.c +++ b/drivers/clk/rockchip/clk-pll.c @@ -34,7 +34,6 @@ struct rockchip_clk_pll { const struct clk_ops *pll_mux_ops; struct notifier_block clk_nb; - bool rate_change_remuxed; void __iomem *reg_base; int lock_offset; @@ -109,38 +108,6 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll) } /** - * Set pll mux when changing the pll rate. - * This makes sure to move the pll mux away from the actual pll before - * changing its rate and back to the original parent after the change. - */ -static int rockchip_pll_notifier_cb(struct notifier_block *nb, - unsigned long event, void *data) -{ - struct rockchip_clk_pll *pll = to_rockchip_clk_pll_nb(nb); - struct clk_mux *pll_mux = &pll->pll_mux; - const struct clk_ops *pll_mux_ops = pll->pll_mux_ops; - int cur_parent; - - switch (event) { - case PRE_RATE_CHANGE: - cur_parent = pll_mux_ops->get_parent(&pll_mux->hw); - if (cur_parent == PLL_MODE_NORM) { - pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW); - pll->rate_change_remuxed = 1; - } - break; - case POST_RATE_CHANGE: - if (pll->rate_change_remuxed) { - pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM); - pll->rate_change_remuxed = 0; - } - break; - } - - return NOTIFY_OK; -} - -/** * PLL used in RK3066, RK3188 and RK3288 */ @@ -194,6 +161,10 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, const struct rockchip_pll_rate_table *rate; unsigned long old_rate = rockchip_rk3066_pll_recalc_rate(hw, prate); struct regmap *grf = rockchip_clk_get_grf(); + struct clk_mux *pll_mux = &pll->pll_mux; + const struct clk_ops *pll_mux_ops = pll->pll_mux_ops; + int rate_change_remuxed = 0; + int cur_parent; int ret; if (IS_ERR(grf)) { @@ -216,6 +187,12 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, pr_debug("%s: rate settings for %lu (nr, no, nf): (%d, %d, %d)\n", __func__, rate->rate, rate->nr, rate->no, rate->nf); + cur_parent = pll_mux_ops->get_parent(&pll_mux->hw); + if (cur_parent == PLL_MODE_NORM) { + pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW); + rate_change_remuxed = 1; + } + /* enter reset mode */ writel(HIWORD_UPDATE(RK3066_PLLCON3_RESET, RK3066_PLLCON3_RESET, 0), pll->reg_base + RK3066_PLLCON(3)); @@ -247,6 +224,9 @@ static int rockchip_rk3066_pll_set_rate(struct clk_hw *hw, unsigned long drate, rockchip_rk3066_pll_set_rate(hw, old_rate, prate); } + if (rate_change_remuxed) + pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM); + return ret; } @@ -310,7 +290,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, struct clk_mux *pll_mux; struct clk *pll_clk, *mux_clk; char pll_name[20]; - int ret; if (num_parents != 2) { pr_err("%s: needs two parent clocks\n", __func__); @@ -367,7 +346,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, pll->lock_offset = grf_lock_offset; pll->lock_shift = lock_shift; pll->lock = lock; - pll->clk_nb.notifier_call = rockchip_pll_notifier_cb; pll_clk = clk_register(NULL, &pll->hw); if (IS_ERR(pll_clk)) { @@ -377,14 +355,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, goto err_pll; } - ret = clk_notifier_register(pll_clk, &pll->clk_nb); - if (ret) { - pr_err("%s: failed to register clock notifier for %s : %d\n", - __func__, name, ret); - mux_clk = ERR_PTR(ret); - goto err_pll_notifier; - } - /* create the mux on top of the real pll */ pll->pll_mux_ops = &clk_mux_ops; pll_mux = &pll->pll_mux; @@ -417,13 +387,6 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, return mux_clk; err_mux: - ret = clk_notifier_unregister(pll_clk, &pll->clk_nb); - if (ret) { - pr_err("%s: could not unregister clock notifier in error path : %d\n", - __func__, ret); - return mux_clk; - } -err_pll_notifier: clk_unregister(pll_clk); err_pll: kfree(pll); diff --git a/drivers/clk/rockchip/clk-rk3188.c b/drivers/clk/rockchip/clk-rk3188.c index a83a6d8d0fb..beed49c7912 100644 --- a/drivers/clk/rockchip/clk-rk3188.c +++ b/drivers/clk/rockchip/clk-rk3188.c @@ -19,6 +19,7 @@ #include <dt-bindings/clock/rk3188-cru-common.h> #include "clk.h" +#define RK3066_GRF_SOC_STATUS 0x15c #define RK3188_GRF_SOC_STATUS 0xac enum rk3188_plls { @@ -100,6 +101,98 @@ struct rockchip_pll_rate_table rk3188_pll_rates[] = { { /* sentinel */ }, }; +#define RK3066_DIV_CORE_PERIPH_MASK 0x3 +#define RK3066_DIV_CORE_PERIPH_SHIFT 6 +#define RK3066_DIV_ACLK_CORE_MASK 0x7 +#define RK3066_DIV_ACLK_CORE_SHIFT 0 +#define RK3066_DIV_ACLK_HCLK_MASK 0x3 +#define RK3066_DIV_ACLK_HCLK_SHIFT 8 +#define RK3066_DIV_ACLK_PCLK_MASK 0x3 +#define RK3066_DIV_ACLK_PCLK_SHIFT 12 +#define RK3066_DIV_AHB2APB_MASK 0x3 +#define RK3066_DIV_AHB2APB_SHIFT 14 + +#define RK3066_CLKSEL0(_core_peri) \ + { \ + .reg = RK2928_CLKSEL_CON(0), \ + .val = HIWORD_UPDATE(_core_peri, RK3066_DIV_CORE_PERIPH_MASK, \ + RK3066_DIV_CORE_PERIPH_SHIFT) \ + } +#define RK3066_CLKSEL1(_aclk_core, _aclk_hclk, _aclk_pclk, _ahb2apb) \ + { \ + .reg = RK2928_CLKSEL_CON(1), \ + .val = HIWORD_UPDATE(_aclk_core, RK3066_DIV_ACLK_CORE_MASK, \ + RK3066_DIV_ACLK_CORE_SHIFT) | \ + HIWORD_UPDATE(_aclk_hclk, RK3066_DIV_ACLK_HCLK_MASK, \ + RK3066_DIV_ACLK_HCLK_SHIFT) | \ + HIWORD_UPDATE(_aclk_pclk, RK3066_DIV_ACLK_PCLK_MASK, \ + RK3066_DIV_ACLK_PCLK_SHIFT) | \ + HIWORD_UPDATE(_ahb2apb, RK3066_DIV_AHB2APB_MASK, \ + RK3066_DIV_AHB2APB_SHIFT), \ + } + +#define RK3066_CPUCLK_RATE(_prate, _core_peri, _acore, _ahclk, _apclk, _h2p) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3066_CLKSEL0(_core_peri), \ + RK3066_CLKSEL1(_acore, _ahclk, _apclk, _h2p), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3066_cpuclk_rates[] __initdata = { + RK3066_CPUCLK_RATE(1416000000, 2, 3, 1, 2, 1), + RK3066_CPUCLK_RATE(1200000000, 2, 3, 1, 2, 1), + RK3066_CPUCLK_RATE(1008000000, 2, 2, 1, 2, 1), + RK3066_CPUCLK_RATE( 816000000, 2, 2, 1, 2, 1), + RK3066_CPUCLK_RATE( 600000000, 1, 2, 1, 2, 1), + RK3066_CPUCLK_RATE( 504000000, 1, 1, 1, 2, 1), + RK3066_CPUCLK_RATE( 312000000, 0, 1, 1, 1, 0), +}; + +static const struct rockchip_cpuclk_reg_data rk3066_cpuclk_data = { + .core_reg = RK2928_CLKSEL_CON(0), + .div_core_shift = 0, + .div_core_mask = 0x1f, + .mux_core_shift = 8, +}; + +#define RK3188_DIV_ACLK_CORE_MASK 0x7 +#define RK3188_DIV_ACLK_CORE_SHIFT 3 + +#define RK3188_CLKSEL1(_aclk_core) \ + { \ + .reg = RK2928_CLKSEL_CON(1), \ + .val = HIWORD_UPDATE(_aclk_core, RK3188_DIV_ACLK_CORE_MASK,\ + RK3188_DIV_ACLK_CORE_SHIFT) \ + } +#define RK3188_CPUCLK_RATE(_prate, _core_peri, _aclk_core) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3066_CLKSEL0(_core_peri), \ + RK3188_CLKSEL1(_aclk_core), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3188_cpuclk_rates[] __initdata = { + RK3188_CPUCLK_RATE(1608000000, 2, 3), + RK3188_CPUCLK_RATE(1416000000, 2, 3), + RK3188_CPUCLK_RATE(1200000000, 2, 3), + RK3188_CPUCLK_RATE(1008000000, 2, 3), + RK3188_CPUCLK_RATE( 816000000, 2, 3), + RK3188_CPUCLK_RATE( 600000000, 1, 3), + RK3188_CPUCLK_RATE( 504000000, 1, 3), + RK3188_CPUCLK_RATE( 312000000, 0, 1), +}; + +static const struct rockchip_cpuclk_reg_data rk3188_cpuclk_data = { + .core_reg = RK2928_CLKSEL_CON(0), + .div_core_shift = 9, + .div_core_mask = 0x1f, + .mux_core_shift = 8, +}; + PNAME(mux_pll_p) = { "xin24m", "xin32k" }; PNAME(mux_armclk_p) = { "apll", "gpll_armclk" }; PNAME(mux_ddrphy_p) = { "dpll", "gpll_ddr" }; @@ -173,17 +266,10 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = { GATE(0, "aclk_cpu", "aclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 3, GFLAGS), - DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, - RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), GATE(0, "atclk_cpu", "pclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 6, GFLAGS), GATE(0, "pclk_cpu", "pclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 5, GFLAGS), - DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0, - RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), - COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0, - RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, - RK2928_CLKGATE_CON(4), 9, GFLAGS), GATE(0, "hclk_cpu", "hclk_cpu_pre", 0, RK2928_CLKGATE_CON(0), 4, GFLAGS), @@ -412,10 +498,18 @@ static struct clk_div_table div_aclk_cpu_t[] = { }; static struct rockchip_clk_branch rk3066a_clk_branches[] __initdata = { - COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, - RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 0, 5, DFLAGS), DIVTBL(0, "aclk_cpu_pre", "armclk", 0, - RK2928_CLKSEL_CON(1), 0, 3, DFLAGS, div_aclk_cpu_t), + RK2928_CLKSEL_CON(1), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_aclk_cpu_t), + DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO + | CLK_DIVIDER_READ_ONLY), + DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO + | CLK_DIVIDER_READ_ONLY), + COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO + | CLK_DIVIDER_READ_ONLY, + RK2928_CLKGATE_CON(4), 9, GFLAGS), GATE(CORE_L2C, "core_l2c", "aclk_cpu", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS), @@ -524,8 +618,6 @@ PNAME(mux_hsicphy_p) = { "sclk_otgphy0", "sclk_otgphy1", "gpll", "cpll" }; static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { - COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, - RK2928_CLKSEL_CON(0), 8, 1, MFLAGS, 9, 5, DFLAGS), COMPOSITE_NOMUX_DIVTBL(0, "aclk_core", "armclk", 0, RK2928_CLKSEL_CON(1), 3, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, div_rk3188_aclk_core_t, RK2928_CLKGATE_CON(0), 7, GFLAGS), @@ -533,6 +625,13 @@ static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { /* do not source aclk_cpu_pre from the apll, to keep complexity down */ COMPOSITE_NOGATE(0, "aclk_cpu_pre", mux_aclk_cpu_p, CLK_SET_RATE_NO_REPARENT, RK2928_CLKSEL_CON(0), 5, 1, MFLAGS, 0, 5, DFLAGS), + DIV(0, "pclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), + DIV(0, "hclk_cpu_pre", "aclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO), + COMPOSITE_NOMUX(0, "hclk_ahb2apb", "hclk_cpu_pre", 0, + RK2928_CLKSEL_CON(1), 14, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, + RK2928_CLKGATE_CON(4), 9, GFLAGS), GATE(CORE_L2C, "core_l2c", "armclk", 0, RK2928_CLKGATE_CON(9), 4, GFLAGS), @@ -599,6 +698,12 @@ static struct rockchip_clk_branch rk3188_clk_branches[] __initdata = { GATE(ACLK_GPS, "aclk_gps", "aclk_peri", 0, RK2928_CLKGATE_CON(8), 13, GFLAGS), }; +static const char *rk3188_critical_clocks[] __initconst = { + "aclk_cpu", + "aclk_peri", + "hclk_peri", +}; + static void __init rk3188_common_clk_init(struct device_node *np) { void __iomem *reg_base; @@ -623,29 +728,65 @@ static void __init rk3188_common_clk_init(struct device_node *np) pr_warn("%s: could not register clock usb480m: %ld\n", __func__, PTR_ERR(clk)); - rockchip_clk_register_plls(rk3188_pll_clks, - ARRAY_SIZE(rk3188_pll_clks), - RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(common_clk_branches, ARRAY_SIZE(common_clk_branches)); + rockchip_clk_protect_critical(rk3188_critical_clocks, + ARRAY_SIZE(rk3188_critical_clocks)); rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); + + rockchip_register_restart_notifier(RK2928_GLB_SRST_FST); } static void __init rk3066a_clk_init(struct device_node *np) { rk3188_common_clk_init(np); + rockchip_clk_register_plls(rk3188_pll_clks, + ARRAY_SIZE(rk3188_pll_clks), + RK3066_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3066a_clk_branches, ARRAY_SIZE(rk3066a_clk_branches)); + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3066_cpuclk_data, rk3066_cpuclk_rates, + ARRAY_SIZE(rk3066_cpuclk_rates)); } CLK_OF_DECLARE(rk3066a_cru, "rockchip,rk3066a-cru", rk3066a_clk_init); static void __init rk3188a_clk_init(struct device_node *np) { + struct clk *clk1, *clk2; + unsigned long rate; + int ret; + rk3188_common_clk_init(np); + rockchip_clk_register_plls(rk3188_pll_clks, + ARRAY_SIZE(rk3188_pll_clks), + RK3188_GRF_SOC_STATUS); rockchip_clk_register_branches(rk3188_clk_branches, ARRAY_SIZE(rk3188_clk_branches)); + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3188_cpuclk_data, rk3188_cpuclk_rates, + ARRAY_SIZE(rk3188_cpuclk_rates)); + + /* reparent aclk_cpu_pre from apll */ + clk1 = __clk_lookup("aclk_cpu_pre"); + clk2 = __clk_lookup("gpll"); + if (clk1 && clk2) { + rate = clk_get_rate(clk1); + + ret = clk_set_parent(clk1, clk2); + if (ret < 0) + pr_warn("%s: could not reparent aclk_cpu_pre to gpll\n", + __func__); + + clk_set_rate(clk1, rate); + } else { + pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n", + __func__); + } } CLK_OF_DECLARE(rk3188a_cru, "rockchip,rk3188a-cru", rk3188a_clk_init); diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index b22a2d2f21e..23278291da4 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -20,7 +20,7 @@ #include "clk.h" #define RK3288_GRF_SOC_CON(x) (0x244 + x * 4) -#define RK3288_GRF_SOC_STATUS 0x280 +#define RK3288_GRF_SOC_STATUS1 0x284 enum rk3288_plls { apll, dpll, cpll, gpll, npll, @@ -101,6 +101,70 @@ struct rockchip_pll_rate_table rk3288_pll_rates[] = { { /* sentinel */ }, }; +#define RK3288_DIV_ACLK_CORE_M0_MASK 0xf +#define RK3288_DIV_ACLK_CORE_M0_SHIFT 0 +#define RK3288_DIV_ACLK_CORE_MP_MASK 0xf +#define RK3288_DIV_ACLK_CORE_MP_SHIFT 4 +#define RK3288_DIV_L2RAM_MASK 0x7 +#define RK3288_DIV_L2RAM_SHIFT 0 +#define RK3288_DIV_ATCLK_MASK 0x1f +#define RK3288_DIV_ATCLK_SHIFT 4 +#define RK3288_DIV_PCLK_DBGPRE_MASK 0x1f +#define RK3288_DIV_PCLK_DBGPRE_SHIFT 9 + +#define RK3288_CLKSEL0(_core_m0, _core_mp) \ + { \ + .reg = RK3288_CLKSEL_CON(0), \ + .val = HIWORD_UPDATE(_core_m0, RK3288_DIV_ACLK_CORE_M0_MASK, \ + RK3288_DIV_ACLK_CORE_M0_SHIFT) | \ + HIWORD_UPDATE(_core_mp, RK3288_DIV_ACLK_CORE_MP_MASK, \ + RK3288_DIV_ACLK_CORE_MP_SHIFT), \ + } +#define RK3288_CLKSEL37(_l2ram, _atclk, _pclk_dbg_pre) \ + { \ + .reg = RK3288_CLKSEL_CON(37), \ + .val = HIWORD_UPDATE(_l2ram, RK3288_DIV_L2RAM_MASK, \ + RK3288_DIV_L2RAM_SHIFT) | \ + HIWORD_UPDATE(_atclk, RK3288_DIV_ATCLK_MASK, \ + RK3288_DIV_ATCLK_SHIFT) | \ + HIWORD_UPDATE(_pclk_dbg_pre, \ + RK3288_DIV_PCLK_DBGPRE_MASK, \ + RK3288_DIV_PCLK_DBGPRE_SHIFT), \ + } + +#define RK3288_CPUCLK_RATE(_prate, _core_m0, _core_mp, _l2ram, _atclk, _pdbg) \ + { \ + .prate = _prate, \ + .divs = { \ + RK3288_CLKSEL0(_core_m0, _core_mp), \ + RK3288_CLKSEL37(_l2ram, _atclk, _pdbg), \ + }, \ + } + +static struct rockchip_cpuclk_rate_table rk3288_cpuclk_rates[] __initdata = { + RK3288_CPUCLK_RATE(1800000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1704000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1608000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1512000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1416000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1200000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE(1008000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 816000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 696000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 600000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 408000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 312000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 216000000, 2, 4, 2, 4, 4), + RK3288_CPUCLK_RATE( 126000000, 2, 4, 2, 4, 4), +}; + +static const struct rockchip_cpuclk_reg_data rk3288_cpuclk_data = { + .core_reg = RK3288_CLKSEL_CON(0), + .div_core_shift = 8, + .div_core_mask = 0x1f, + .mux_core_shift = 15, +}; + PNAME(mux_pll_p) = { "xin24m", "xin32k" }; PNAME(mux_armclk_p) = { "apll_core", "gpll_core" }; PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" }; @@ -143,7 +207,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = { [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12), RK3288_MODE_CON, 12, 8, rk3288_pll_rates), [npll] = PLL(pll_rk3066, PLL_NPLL, "npll", mux_pll_p, 0, RK3288_PLL_CON(16), - RK3288_MODE_CON, 14, 9, NULL), + RK3288_MODE_CON, 14, 9, rk3288_pll_rates), }; static struct clk_div_table div_hclk_cpu_t[] = { @@ -166,35 +230,33 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKGATE_CON(0), 1, GFLAGS), GATE(0, "gpll_core", "gpll", 0, RK3288_CLKGATE_CON(0), 2, GFLAGS), - COMPOSITE_NOGATE(0, "armclk", mux_armclk_p, 0, - RK3288_CLKSEL_CON(0), 15, 1, MFLAGS, 8, 5, DFLAGS), COMPOSITE_NOMUX(0, "armcore0", "armclk", 0, - RK3288_CLKSEL_CON(36), 0, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 0, GFLAGS), COMPOSITE_NOMUX(0, "armcore1", "armclk", 0, - RK3288_CLKSEL_CON(36), 4, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 1, GFLAGS), COMPOSITE_NOMUX(0, "armcore2", "armclk", 0, - RK3288_CLKSEL_CON(36), 8, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 8, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 2, GFLAGS), COMPOSITE_NOMUX(0, "armcore3", "armclk", 0, - RK3288_CLKSEL_CON(36), 12, 3, DFLAGS, + RK3288_CLKSEL_CON(36), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 3, GFLAGS), COMPOSITE_NOMUX(0, "l2ram", "armclk", 0, - RK3288_CLKSEL_CON(37), 0, 3, DFLAGS, + RK3288_CLKSEL_CON(37), 0, 3, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 4, GFLAGS), COMPOSITE_NOMUX(0, "aclk_core_m0", "armclk", 0, - RK3288_CLKSEL_CON(0), 0, 4, DFLAGS, + RK3288_CLKSEL_CON(0), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 5, GFLAGS), COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", 0, - RK3288_CLKSEL_CON(0), 4, 4, DFLAGS, + RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 6, GFLAGS), COMPOSITE_NOMUX(0, "atclk", "armclk", 0, - RK3288_CLKSEL_CON(37), 4, 5, DFLAGS, + RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 7, GFLAGS), COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", 0, - RK3288_CLKSEL_CON(37), 9, 5, DFLAGS, + RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY, RK3288_CLKGATE_CON(12), 8, GFLAGS), GATE(0, "pclk_dbg", "pclk_dbg_pre", 0, RK3288_CLKGATE_CON(12), 9, GFLAGS), @@ -219,12 +281,12 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(1), 15, 1, MFLAGS, 3, 5, DFLAGS), DIV(0, "aclk_cpu_pre", "aclk_cpu_src", 0, RK3288_CLKSEL_CON(1), 0, 3, DFLAGS), - GATE(0, "aclk_cpu", "aclk_cpu_pre", 0, + GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_pre", 0, RK3288_CLKGATE_CON(0), 3, GFLAGS), - COMPOSITE_NOMUX(0, "pclk_cpu", "aclk_cpu_pre", 0, + COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_pre", 0, RK3288_CLKSEL_CON(1), 12, 3, DFLAGS, RK3288_CLKGATE_CON(0), 5, GFLAGS), - COMPOSITE_NOMUX_DIVTBL(0, "hclk_cpu", "aclk_cpu_pre", 0, + COMPOSITE_NOMUX_DIVTBL(HCLK_CPU, "hclk_cpu", "aclk_cpu_pre", 0, RK3288_CLKSEL_CON(1), 8, 2, DFLAGS, div_hclk_cpu_t, RK3288_CLKGATE_CON(0), 4, GFLAGS), GATE(0, "c2c_host", "aclk_cpu_src", 0, @@ -238,15 +300,15 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "i2s_src", mux_pll_src_cpll_gpll_p, 0, RK3288_CLKSEL_CON(4), 15, 1, MFLAGS, 0, 7, DFLAGS, RK3288_CLKGATE_CON(4), 1, GFLAGS), - COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", 0, + COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT, RK3288_CLKSEL_CON(8), 0, RK3288_CLKGATE_CON(4), 2, GFLAGS), - MUX(0, "i2s_pre", mux_i2s_pre_p, 0, + MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT, RK3288_CLKSEL_CON(4), 8, 2, MFLAGS), - COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, 0, + COMPOSITE_NODIV(0, "i2s0_clkout", mux_i2s_clkout_p, CLK_SET_RATE_PARENT, RK3288_CLKSEL_CON(4), 12, 1, MFLAGS, RK3288_CLKGATE_CON(4), 0, GFLAGS), - GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", 0, + GATE(SCLK_I2S0, "sclk_i2s0", "i2s_pre", CLK_SET_RATE_PARENT, RK3288_CLKGATE_CON(4), 3, GFLAGS), MUX(0, "spdif_src", mux_pll_src_cpll_gpll_p, 0, @@ -296,6 +358,20 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_vdpu", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(3), 11, GFLAGS), + /* + * We use aclk_vdpu by default GRF_SOC_CON0[7] setting in system, + * so we ignore the mux and make clocks nodes as following, + */ + GATE(ACLK_VCODEC, "aclk_vcodec", "aclk_vdpu", 0, + RK3288_CLKGATE_CON(9), 0, GFLAGS), + /* + * We introduce a virtul node of hclk_vodec_pre_v to split one clock + * struct with a gate and a fix divider into two node in software. + */ + GATE(0, "hclk_vcodec_pre_v", "aclk_vdpu", 0, + RK3288_CLKGATE_CON(3), 10, GFLAGS), + GATE(HCLK_VCODEC, "hclk_vcodec", "hclk_vcodec_pre", 0, + RK3288_CLKGATE_CON(9), 1, GFLAGS), COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS, @@ -309,7 +385,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_rga_pre", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(30), 6, 2, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(3), 5, GFLAGS), - COMPOSITE(0, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0, + COMPOSITE(SCLK_RGA, "sclk_rga", mux_pll_src_cpll_gpll_usb480m_p, 0, RK3288_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(3), 4, GFLAGS), @@ -320,35 +396,35 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(29), 6, 2, MFLAGS, 8, 8, DFLAGS, RK3288_CLKGATE_CON(3), 3, GFLAGS), - COMPOSITE_NODIV(0, "sclk_edp_24m", mux_edp_24m_p, 0, + COMPOSITE_NODIV(SCLK_EDP_24M, "sclk_edp_24m", mux_edp_24m_p, 0, RK3288_CLKSEL_CON(28), 15, 1, MFLAGS, RK3288_CLKGATE_CON(3), 12, GFLAGS), - COMPOSITE(0, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_EDP, "sclk_edp", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(28), 6, 2, MFLAGS, 0, 6, DFLAGS, RK3288_CLKGATE_CON(3), 13, GFLAGS), - COMPOSITE(0, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_ISP, "sclk_isp", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(6), 6, 2, MFLAGS, 0, 6, DFLAGS, RK3288_CLKGATE_CON(3), 14, GFLAGS), - COMPOSITE(0, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_ISP_JPE, "sclk_isp_jpe", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(6), 14, 2, MFLAGS, 8, 6, DFLAGS, RK3288_CLKGATE_CON(3), 15, GFLAGS), - GATE(0, "sclk_hdmi_hdcp", "xin24m", 0, + GATE(SCLK_HDMI_HDCP, "sclk_hdmi_hdcp", "xin24m", 0, RK3288_CLKGATE_CON(5), 12, GFLAGS), - GATE(0, "sclk_hdmi_cec", "xin32k", 0, + GATE(SCLK_HDMI_CEC, "sclk_hdmi_cec", "xin32k", 0, RK3288_CLKGATE_CON(5), 11, GFLAGS), - COMPOSITE(0, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(ACLK_HEVC, "aclk_hevc", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(39), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(13), 13, GFLAGS), - DIV(0, "hclk_hevc", "aclk_hevc", 0, + DIV(HCLK_HEVC, "hclk_hevc", "aclk_hevc", 0, RK3288_CLKSEL_CON(40), 12, 2, DFLAGS), - COMPOSITE(0, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_HEVC_CABAC, "sclk_hevc_cabac", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(42), 6, 2, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(13), 14, GFLAGS), - COMPOSITE(0, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0, + COMPOSITE(SCLK_HEVC_CORE, "sclk_hevc_core", mux_pll_src_cpll_gpll_npll_p, 0, RK3288_CLKSEL_CON(42), 14, 2, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(13), 15, GFLAGS), @@ -371,13 +447,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { COMPOSITE(0, "aclk_peri_src", mux_pll_src_cpll_gpll_p, 0, RK3288_CLKSEL_CON(10), 15, 1, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(2), 0, GFLAGS), - COMPOSITE_NOMUX(0, "pclk_peri", "aclk_peri_src", 0, + COMPOSITE_NOMUX(PCLK_PERI, "pclk_peri", "aclk_peri_src", 0, RK3288_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, RK3288_CLKGATE_CON(2), 3, GFLAGS), - COMPOSITE_NOMUX(0, "hclk_peri", "aclk_peri_src", 0, + COMPOSITE_NOMUX(HCLK_PERI, "hclk_peri", "aclk_peri_src", 0, RK3288_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO, RK3288_CLKGATE_CON(2), 2, GFLAGS), - GATE(0, "aclk_peri", "aclk_peri_src", 0, + GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0, RK3288_CLKGATE_CON(2), 1, GFLAGS), /* @@ -643,34 +719,34 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { GATE(HCLK_RGA, "hclk_rga", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 1, GFLAGS), GATE(HCLK_VOP0, "hclk_vop0", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 6, GFLAGS), GATE(HCLK_VOP1, "hclk_vop1", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 8, GFLAGS), - GATE(0, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS), - GATE(0, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS), - GATE(0, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS), + GATE(HCLK_VIO_AHB_ARBI, "hclk_vio_ahb_arbi", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 9, GFLAGS), + GATE(HCLK_VIO_NIU, "hclk_vio_niu", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 10, GFLAGS), + GATE(HCLK_VIP, "hclk_vip", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 15, GFLAGS), GATE(HCLK_IEP, "hclk_iep", "hclk_vio", 0, RK3288_CLKGATE_CON(15), 3, GFLAGS), GATE(HCLK_ISP, "hclk_isp", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 1, GFLAGS), - GATE(0, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS), - GATE(0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS), - GATE(0, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS), - GATE(0, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS), - GATE(0, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS), - GATE(0, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS), - GATE(0, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS), - GATE(0, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS), + GATE(HCLK_VIO2_H2P, "hclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 10, GFLAGS), + GATE(PCLK_MIPI_DSI0, "pclk_mipi_dsi0", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 4, GFLAGS), + GATE(PCLK_MIPI_DSI1, "pclk_mipi_dsi1", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 5, GFLAGS), + GATE(PCLK_MIPI_CSI, "pclk_mipi_csi", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 6, GFLAGS), + GATE(PCLK_LVDS_PHY, "pclk_lvds_phy", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 7, GFLAGS), + GATE(PCLK_EDP_CTRL, "pclk_edp_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 8, GFLAGS), + GATE(PCLK_HDMI_CTRL, "pclk_hdmi_ctrl", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 9, GFLAGS), + GATE(PCLK_VIO2_H2P, "pclk_vio2_h2p", "hclk_vio", 0, RK3288_CLKGATE_CON(16), 11, GFLAGS), /* aclk_vio0 gates */ GATE(ACLK_VOP0, "aclk_vop0", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 5, GFLAGS), - GATE(0, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS), - GATE(0, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS), - GATE(0, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS), + GATE(ACLK_IEP, "aclk_iep", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 2, GFLAGS), + GATE(ACLK_VIO0_NIU, "aclk_vio0_niu", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 11, GFLAGS), + GATE(ACLK_VIP, "aclk_vip", "aclk_vio0", 0, RK3288_CLKGATE_CON(15), 14, GFLAGS), /* aclk_vio1 gates */ GATE(ACLK_VOP1, "aclk_vop1", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 7, GFLAGS), - GATE(0, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS), - GATE(0, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS), + GATE(ACLK_ISP, "aclk_isp", "aclk_vio1", 0, RK3288_CLKGATE_CON(16), 2, GFLAGS), + GATE(ACLK_VIO1_NIU, "aclk_vio1_niu", "aclk_vio1", 0, RK3288_CLKGATE_CON(15), 12, GFLAGS), /* aclk_rga_pre gates */ GATE(ACLK_RGA, "aclk_rga", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 0, GFLAGS), - GATE(0, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS), + GATE(ACLK_RGA_NIU, "aclk_rga_niu", "aclk_rga_pre", 0, RK3288_CLKGATE_CON(15), 13, GFLAGS), /* * Other ungrouped clocks. @@ -680,6 +756,12 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { GATE(0, "pclk_isp_in", "ext_isp", 0, RK3288_CLKGATE_CON(16), 3, GFLAGS), }; +static const char *rk3288_critical_clocks[] __initconst = { + "aclk_cpu", + "aclk_peri", + "hclk_peri", +}; + static void __init rk3288_clk_init(struct device_node *np) { void __iomem *reg_base; @@ -705,13 +787,28 @@ static void __init rk3288_clk_init(struct device_node *np) pr_warn("%s: could not register clock usb480m: %ld\n", __func__, PTR_ERR(clk)); + clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre", + "hclk_vcodec_pre_v", 0, 1, 4); + if (IS_ERR(clk)) + pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n", + __func__, PTR_ERR(clk)); + rockchip_clk_register_plls(rk3288_pll_clks, ARRAY_SIZE(rk3288_pll_clks), - RK3288_GRF_SOC_STATUS); + RK3288_GRF_SOC_STATUS1); rockchip_clk_register_branches(rk3288_clk_branches, ARRAY_SIZE(rk3288_clk_branches)); + rockchip_clk_protect_critical(rk3288_critical_clocks, + ARRAY_SIZE(rk3288_critical_clocks)); - rockchip_register_softrst(np, 9, reg_base + RK3288_SOFTRST_CON(0), + rockchip_clk_register_armclk(ARMCLK, "armclk", + mux_armclk_p, ARRAY_SIZE(mux_armclk_p), + &rk3288_cpuclk_data, rk3288_cpuclk_rates, + ARRAY_SIZE(rk3288_cpuclk_rates)); + + rockchip_register_softrst(np, 12, reg_base + RK3288_SOFTRST_CON(0), ROCKCHIP_SOFTRST_HIWORD_MASK); + + rockchip_register_restart_notifier(RK3288_GLB_SRST_FST); } CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init); diff --git a/drivers/clk/rockchip/clk.c b/drivers/clk/rockchip/clk.c index 278cf9dd1e2..1e68bff481b 100644 --- a/drivers/clk/rockchip/clk.c +++ b/drivers/clk/rockchip/clk.c @@ -25,6 +25,7 @@ #include <linux/clk-provider.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> +#include <linux/reboot.h> #include "clk.h" /** @@ -37,7 +38,7 @@ * * sometimes without one of those components. */ -struct clk *rockchip_clk_register_branch(const char *name, +static struct clk *rockchip_clk_register_branch(const char *name, const char **parent_names, u8 num_parents, void __iomem *base, int muxdiv_offset, u8 mux_shift, u8 mux_width, u8 mux_flags, u8 div_shift, u8 div_width, u8 div_flags, @@ -103,6 +104,54 @@ struct clk *rockchip_clk_register_branch(const char *name, return clk; } +static struct clk *rockchip_clk_register_frac_branch(const char *name, + const char **parent_names, u8 num_parents, void __iomem *base, + int muxdiv_offset, u8 div_flags, + int gate_offset, u8 gate_shift, u8 gate_flags, + unsigned long flags, spinlock_t *lock) +{ + struct clk *clk; + struct clk_gate *gate = NULL; + struct clk_fractional_divider *div = NULL; + const struct clk_ops *div_ops = NULL, *gate_ops = NULL; + + if (gate_offset >= 0) { + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return ERR_PTR(-ENOMEM); + + gate->flags = gate_flags; + gate->reg = base + gate_offset; + gate->bit_idx = gate_shift; + gate->lock = lock; + gate_ops = &clk_gate_ops; + } + + if (muxdiv_offset < 0) + return ERR_PTR(-EINVAL); + + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return ERR_PTR(-ENOMEM); + + div->flags = div_flags; + div->reg = base + muxdiv_offset; + div->mshift = 16; + div->mmask = 0xffff0000; + div->nshift = 0; + div->nmask = 0xffff; + div->lock = lock; + div_ops = &clk_fractional_divider_ops; + + clk = clk_register_composite(NULL, name, parent_names, num_parents, + NULL, NULL, + &div->hw, div_ops, + gate ? &gate->hw : NULL, gate_ops, + flags); + + return clk; +} + static DEFINE_SPINLOCK(clk_lock); static struct clk **clk_table; static void __iomem *reg_base; @@ -197,8 +246,14 @@ void __init rockchip_clk_register_branches( list->div_flags, &clk_lock); break; case branch_fraction_divider: - /* unimplemented */ - continue; + /* keep all gates untouched for now */ + flags |= CLK_IGNORE_UNUSED; + + clk = rockchip_clk_register_frac_branch(list->name, + list->parent_names, list->num_parents, + reg_base, list->muxdiv_offset, list->div_flags, + list->gate_offset, list->gate_shift, + list->gate_flags, flags, &clk_lock); break; case branch_gate: flags |= CLK_SET_RATE_PARENT; @@ -242,3 +297,61 @@ void __init rockchip_clk_register_branches( rockchip_clk_add_lookup(clk, list->id); } } + +void __init rockchip_clk_register_armclk(unsigned int lookup_id, + const char *name, const char **parent_names, + u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates) +{ + struct clk *clk; + + clk = rockchip_clk_register_cpuclk(name, parent_names, num_parents, + reg_data, rates, nrates, reg_base, + &clk_lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register clock %s: %ld\n", + __func__, name, PTR_ERR(clk)); + return; + } + + rockchip_clk_add_lookup(clk, lookup_id); +} + +void __init rockchip_clk_protect_critical(const char *clocks[], int nclocks) +{ + int i; + + /* Protect the clocks that needs to stay on */ + for (i = 0; i < nclocks; i++) { + struct clk *clk = __clk_lookup(clocks[i]); + + if (clk) + clk_prepare_enable(clk); + } +} + +static unsigned int reg_restart; +static int rockchip_restart_notify(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + writel(0xfdb9, reg_base + reg_restart); + return NOTIFY_DONE; +} + +static struct notifier_block rockchip_restart_handler = { + .notifier_call = rockchip_restart_notify, + .priority = 128, +}; + +void __init rockchip_register_restart_notifier(unsigned int reg) +{ + int ret; + + reg_restart = reg; + ret = register_restart_handler(&rockchip_restart_handler); + if (ret) + pr_err("%s: cannot register restart handler, %d\n", + __func__, ret); +} diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h index 887cbdeca2a..ca009ab0a33 100644 --- a/drivers/clk/rockchip/clk.h +++ b/drivers/clk/rockchip/clk.h @@ -120,6 +120,38 @@ struct clk *rockchip_clk_register_pll(enum rockchip_pll_type pll_type, struct rockchip_pll_rate_table *rate_table, spinlock_t *lock); +struct rockchip_cpuclk_clksel { + int reg; + u32 val; +}; + +#define ROCKCHIP_CPUCLK_NUM_DIVIDERS 2 +struct rockchip_cpuclk_rate_table { + unsigned long prate; + struct rockchip_cpuclk_clksel divs[ROCKCHIP_CPUCLK_NUM_DIVIDERS]; +}; + +/** + * struct rockchip_cpuclk_reg_data: describes register offsets and masks of the cpuclock + * @core_reg: register offset of the core settings register + * @div_core_shift: core divider offset used to divide the pll value + * @div_core_mask: core divider mask + * @mux_core_shift: offset of the core multiplexer + */ +struct rockchip_cpuclk_reg_data { + int core_reg; + u8 div_core_shift; + u32 div_core_mask; + int mux_core_reg; + u8 mux_core_shift; +}; + +struct clk *rockchip_clk_register_cpuclk(const char *name, + const char **parent_names, u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates, void __iomem *reg_base, spinlock_t *lock); + #define PNAME(x) static const char *x[] __initconst enum rockchip_clk_branch_type { @@ -329,6 +361,13 @@ void rockchip_clk_register_branches(struct rockchip_clk_branch *clk_list, unsigned int nr_clk); void rockchip_clk_register_plls(struct rockchip_pll_clock *pll_list, unsigned int nr_pll, int grf_lock_offset); +void rockchip_clk_register_armclk(unsigned int lookup_id, const char *name, + const char **parent_names, u8 num_parents, + const struct rockchip_cpuclk_reg_data *reg_data, + const struct rockchip_cpuclk_rate_table *rates, + int nrates); +void rockchip_clk_protect_critical(const char *clocks[], int nclocks); +void rockchip_register_restart_notifier(unsigned int reg); #define ROCKCHIP_SOFTRST_HIWORD_MASK BIT(0) diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c index dc85f8e7a2d..6e6cca39208 100644 --- a/drivers/clk/samsung/clk-exynos3250.c +++ b/drivers/clk/samsung/clk-exynos3250.c @@ -110,7 +110,14 @@ enum exynos3250_plls { nr_plls }; +/* list of PLLs in DMC block to be registered */ +enum exynos3250_dmc_plls { + bpll, epll, + nr_dmc_plls +}; + static void __iomem *reg_base; +static void __iomem *dmc_reg_base; /* * Support for CMU save/restore across system suspends @@ -266,6 +273,7 @@ PNAME(group_sclk_cam_blk_p) = { "xxti", "xusbxti", "none", "none", "none", "none", "div_mpll_pre", "mout_epll_user", "mout_vpll", + "none", "none", "none", "div_cam_blk_320", }; PNAME(group_sclk_fimd0_p) = { "xxti", "xusbxti", "m_bitclkhsdiv4_2l", "none", @@ -353,8 +361,8 @@ static struct samsung_mux_clock mux_clks[] __initdata = { /* SRC_FSYS */ MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4), - MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3), - MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3), + MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 4), + MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4), /* SRC_PERIL0 */ MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4), @@ -423,7 +431,7 @@ static struct samsung_div_clock div_clks[] __initdata = { DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4), DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp", DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0), - DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4), + DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 4, 4), /* DIV_FSYS0 */ DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8, @@ -724,6 +732,25 @@ static struct samsung_pll_rate_table exynos3250_pll_rates[] = { { /* sentinel */ } }; +/* EPLL */ +static struct samsung_pll_rate_table exynos3250_epll_rates[] = { + PLL_36XX_RATE(800000000, 200, 3, 1, 0), + PLL_36XX_RATE(288000000, 96, 2, 2, 0), + PLL_36XX_RATE(192000000, 128, 2, 3, 0), + PLL_36XX_RATE(144000000, 96, 2, 3, 0), + PLL_36XX_RATE( 96000000, 128, 2, 4, 0), + PLL_36XX_RATE( 84000000, 112, 2, 4, 0), + PLL_36XX_RATE( 80000004, 106, 2, 4, 43691), + PLL_36XX_RATE( 73728000, 98, 2, 4, 19923), + PLL_36XX_RATE( 67737598, 270, 3, 5, 62285), + PLL_36XX_RATE( 65535999, 174, 2, 5, 49982), + PLL_36XX_RATE( 50000000, 200, 3, 5, 0), + PLL_36XX_RATE( 49152002, 131, 2, 5, 4719), + PLL_36XX_RATE( 48000000, 128, 2, 5, 0), + PLL_36XX_RATE( 45158401, 180, 3, 5, 41524), + { /* sentinel */ } +}; + /* VPLL */ static struct samsung_pll_rate_table exynos3250_vpll_rates[] = { PLL_36XX_RATE(600000000, 100, 2, 1, 0), @@ -821,3 +848,172 @@ static void __init exynos3250_cmu_init(struct device_node *np) samsung_clk_of_add_provider(np, ctx); } CLK_OF_DECLARE(exynos3250_cmu, "samsung,exynos3250-cmu", exynos3250_cmu_init); + +/* + * CMU DMC + */ + +#define BPLL_LOCK 0x0118 +#define BPLL_CON0 0x0218 +#define BPLL_CON1 0x021c +#define BPLL_CON2 0x0220 +#define SRC_DMC 0x0300 +#define DIV_DMC1 0x0504 +#define GATE_BUS_DMC0 0x0700 +#define GATE_BUS_DMC1 0x0704 +#define GATE_BUS_DMC2 0x0708 +#define GATE_BUS_DMC3 0x070c +#define GATE_SCLK_DMC 0x0800 +#define GATE_IP_DMC0 0x0900 +#define GATE_IP_DMC1 0x0904 +#define EPLL_LOCK 0x1110 +#define EPLL_CON0 0x1114 +#define EPLL_CON1 0x1118 +#define EPLL_CON2 0x111c +#define SRC_EPLL 0x1120 + +/* + * Support for CMU save/restore across system suspends + */ +#ifdef CONFIG_PM_SLEEP +static struct samsung_clk_reg_dump *exynos3250_dmc_clk_regs; + +static unsigned long exynos3250_cmu_dmc_clk_regs[] __initdata = { + BPLL_LOCK, + BPLL_CON0, + BPLL_CON1, + BPLL_CON2, + SRC_DMC, + DIV_DMC1, + GATE_BUS_DMC0, + GATE_BUS_DMC1, + GATE_BUS_DMC2, + GATE_BUS_DMC3, + GATE_SCLK_DMC, + GATE_IP_DMC0, + GATE_IP_DMC1, + EPLL_LOCK, + EPLL_CON0, + EPLL_CON1, + EPLL_CON2, + SRC_EPLL, +}; + +static int exynos3250_dmc_clk_suspend(void) +{ + samsung_clk_save(dmc_reg_base, exynos3250_dmc_clk_regs, + ARRAY_SIZE(exynos3250_cmu_dmc_clk_regs)); + return 0; +} + +static void exynos3250_dmc_clk_resume(void) +{ + samsung_clk_restore(dmc_reg_base, exynos3250_dmc_clk_regs, + ARRAY_SIZE(exynos3250_cmu_dmc_clk_regs)); +} + +static struct syscore_ops exynos3250_dmc_clk_syscore_ops = { + .suspend = exynos3250_dmc_clk_suspend, + .resume = exynos3250_dmc_clk_resume, +}; + +static void exynos3250_dmc_clk_sleep_init(void) +{ + exynos3250_dmc_clk_regs = + samsung_clk_alloc_reg_dump(exynos3250_cmu_dmc_clk_regs, + ARRAY_SIZE(exynos3250_cmu_dmc_clk_regs)); + if (!exynos3250_dmc_clk_regs) { + pr_warn("%s: Failed to allocate sleep save data\n", __func__); + goto err; + } + + register_syscore_ops(&exynos3250_dmc_clk_syscore_ops); + return; +err: + kfree(exynos3250_dmc_clk_regs); +} +#else +static inline void exynos3250_dmc_clk_sleep_init(void) { } +#endif + +PNAME(mout_epll_p) = { "fin_pll", "fout_epll", }; +PNAME(mout_bpll_p) = { "fin_pll", "fout_bpll", }; +PNAME(mout_mpll_mif_p) = { "fin_pll", "sclk_mpll_mif", }; +PNAME(mout_dphy_p) = { "mout_mpll_mif", "mout_bpll", }; + +static struct samsung_mux_clock dmc_mux_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* SRC_DMC */ + MUX(CLK_MOUT_MPLL_MIF, "mout_mpll_mif", mout_mpll_mif_p, SRC_DMC, 12, 1), + MUX(CLK_MOUT_BPLL, "mout_bpll", mout_bpll_p, SRC_DMC, 10, 1), + MUX(CLK_MOUT_DPHY, "mout_dphy", mout_dphy_p, SRC_DMC, 8, 1), + MUX(CLK_MOUT_DMC_BUS, "mout_dmc_bus", mout_dphy_p, SRC_DMC, 4, 1), + + /* SRC_EPLL */ + MUX(CLK_MOUT_EPLL, "mout_epll", mout_epll_p, SRC_EPLL, 4, 1), +}; + +static struct samsung_div_clock dmc_div_clks[] __initdata = { + /* + * NOTE: Following table is sorted by register address in ascending + * order and then bitfield shift in descending order, as it is done + * in the User's Manual. When adding new entries, please make sure + * that the order is preserved, to avoid merge conflicts and make + * further work with defined data easier. + */ + + /* DIV_DMC1 */ + DIV(CLK_DIV_DMC, "div_dmc", "div_dmc_pre", DIV_DMC1, 27, 3), + DIV(CLK_DIV_DPHY, "div_dphy", "mout_dphy", DIV_DMC1, 23, 3), + DIV(CLK_DIV_DMC_PRE, "div_dmc_pre", "mout_dmc_bus", DIV_DMC1, 19, 2), + DIV(CLK_DIV_DMCP, "div_dmcp", "div_dmcd", DIV_DMC1, 15, 3), + DIV(CLK_DIV_DMCD, "div_dmcd", "div_dmc", DIV_DMC1, 11, 3), +}; + +static struct samsung_pll_clock exynos3250_dmc_plls[nr_dmc_plls] __initdata = { + [bpll] = PLL(pll_35xx, CLK_FOUT_BPLL, "fout_bpll", "fin_pll", + BPLL_LOCK, BPLL_CON0, NULL), + [epll] = PLL(pll_36xx, CLK_FOUT_EPLL, "fout_epll", "fin_pll", + EPLL_LOCK, EPLL_CON0, NULL), +}; + +static void __init exynos3250_cmu_dmc_init(struct device_node *np) +{ + struct samsung_clk_provider *ctx; + + dmc_reg_base = of_iomap(np, 0); + if (!dmc_reg_base) + panic("%s: failed to map registers\n", __func__); + + ctx = samsung_clk_init(np, dmc_reg_base, NR_CLKS_DMC); + if (!ctx) + panic("%s: unable to allocate context.\n", __func__); + + exynos3250_dmc_plls[bpll].rate_table = exynos3250_pll_rates; + exynos3250_dmc_plls[epll].rate_table = exynos3250_epll_rates; + + pr_err("CLK registering epll bpll: %d, %d, %d, %d\n", + exynos3250_dmc_plls[bpll].rate_table[0].rate, + exynos3250_dmc_plls[bpll].rate_table[0].mdiv, + exynos3250_dmc_plls[bpll].rate_table[0].pdiv, + exynos3250_dmc_plls[bpll].rate_table[0].sdiv + ); + samsung_clk_register_pll(ctx, exynos3250_dmc_plls, + ARRAY_SIZE(exynos3250_dmc_plls), dmc_reg_base); + + samsung_clk_register_mux(ctx, dmc_mux_clks, ARRAY_SIZE(dmc_mux_clks)); + samsung_clk_register_div(ctx, dmc_div_clks, ARRAY_SIZE(dmc_div_clks)); + + exynos3250_dmc_clk_sleep_init(); + + samsung_clk_of_add_provider(np, ctx); +} +CLK_OF_DECLARE(exynos3250_cmu_dmc, "samsung,exynos3250-cmu-dmc", + exynos3250_cmu_dmc_init); diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c index ac163d7f5bc..940f02837b8 100644 --- a/drivers/clk/samsung/clk-exynos4.c +++ b/drivers/clk/samsung/clk-exynos4.c @@ -517,7 +517,7 @@ static struct samsung_fixed_factor_clock exynos4_fixed_factor_clks[] __initdata FFACTOR(0, "sclk_apll_div_2", "sclk_apll", 1, 2, 0), FFACTOR(0, "fout_mpll_div_2", "fout_mpll", 1, 2, 0), FFACTOR(0, "fout_apll_div_2", "fout_apll", 1, 2, 0), - FFACTOR(0, "arm_clk_div_2", "arm_clk", 1, 2, 0), + FFACTOR(0, "arm_clk_div_2", "div_core2", 1, 2, 0), }; static struct samsung_fixed_factor_clock exynos4210_fixed_factor_clks[] __initdata = { @@ -535,7 +535,7 @@ static struct samsung_fixed_factor_clock exynos4x12_fixed_factor_clks[] __initda static struct samsung_mux_clock exynos4_mux_clks[] __initdata = { MUX_FA(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, CLK_SET_RATE_PARENT, 0, "mout_apll"), - MUX(0, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1), + MUX(CLK_MOUT_HDMI, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1), MUX(0, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1), MUX(0, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1), MUX_F(CLK_MOUT_G3D1, "mout_g3d1", sclk_evpll_p, SRC_G3D, 4, 1, @@ -569,7 +569,7 @@ static struct samsung_mux_clock exynos4210_mux_clks[] __initdata = { MUX(0, "mout_aclk100", sclk_ampll_p4210, SRC_TOP0, 16, 1), MUX(0, "mout_aclk160", sclk_ampll_p4210, SRC_TOP0, 20, 1), MUX(0, "mout_aclk133", sclk_ampll_p4210, SRC_TOP0, 24, 1), - MUX(0, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1), + MUX(CLK_MOUT_MIXER, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1), MUX(0, "mout_dac", mout_dac_p4210, SRC_TV, 8, 1), MUX(0, "mout_g2d0", sclk_ampll_p4210, E4210_SRC_IMAGE, 0, 1), MUX(0, "mout_g2d1", sclk_evpll_p, E4210_SRC_IMAGE, 4, 1), @@ -719,7 +719,7 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(0, "div_periph", "div_core2", DIV_CPU0, 12, 3), DIV(0, "div_atb", "mout_core", DIV_CPU0, 16, 3), DIV(0, "div_pclk_dbg", "div_atb", DIV_CPU0, 20, 3), - DIV(0, "div_core2", "div_core", DIV_CPU0, 28, 3), + DIV(CLK_ARM_CLK, "div_core2", "div_core", DIV_CPU0, 28, 3), DIV(0, "div_copy", "mout_hpm", DIV_CPU1, 0, 3), DIV(0, "div_hpm", "div_copy", DIV_CPU1, 4, 3), DIV(0, "div_clkout_cpu", "mout_clkout_cpu", CLKOUT_CMU_CPU, 8, 6), @@ -733,8 +733,7 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(0, "div_csis0", "mout_csis0", DIV_CAM, 24, 4), DIV(0, "div_csis1", "mout_csis1", DIV_CAM, 28, 4), DIV(CLK_SCLK_MFC, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4), - DIV_F(0, "div_g3d", "mout_g3d", DIV_G3D, 0, 4, - CLK_SET_RATE_PARENT, 0), + DIV(CLK_SCLK_G3D, "sclk_g3d", "mout_g3d", DIV_G3D, 0, 4), DIV(0, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4), DIV(0, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4), DIV(0, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4), @@ -769,7 +768,6 @@ static struct samsung_div_clock exynos4_div_clks[] __initdata = { DIV(0, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8), DIV(0, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4), DIV(0, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4), - DIV(CLK_ARM_CLK, "arm_clk", "div_core2", DIV_CPU0, 28, 3), DIV(CLK_SCLK_APLL, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3), DIV_F(0, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4, CLK_SET_RATE_PARENT, 0), @@ -857,8 +855,7 @@ static struct samsung_gate_clock exynos4_gate_clks[] __initdata = { 0), GATE(CLK_TSI, "tsi", "aclk133", GATE_IP_FSYS, 4, 0, 0), GATE(CLK_SROMC, "sromc", "aclk133", GATE_IP_FSYS, 11, 0, 0), - GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d", GATE_IP_G3D, 0, - CLK_SET_RATE_PARENT, 0), + GATE(CLK_G3D, "g3d", "aclk200", GATE_IP_G3D, 0, 0, 0), GATE(CLK_PPMUG3D, "ppmug3d", "aclk200", GATE_IP_G3D, 1, 0, 0), GATE(CLK_USB_DEVICE, "usb_device", "aclk133", GATE_IP_FSYS, 13, 0, 0), GATE(CLK_ONENAND, "onenand", "aclk133", GATE_IP_FSYS, 15, 0, 0), @@ -1183,6 +1180,7 @@ static struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = { GATE(CLK_SPI1_ISP, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13, CLK_IGNORE_UNUSED | CLK_GET_RATE_NOCACHE, 0), GATE(CLK_G2D, "g2d", "aclk200", GATE_IP_DMC, 23, 0, 0), + GATE(CLK_SMMU_G2D, "smmu_g2d", "aclk200", GATE_IP_DMC, 24, 0, 0), GATE(CLK_TMU_APBIF, "tmu_apbif", "aclk100", E4X12_GATE_IP_PERIR, 17, 0, 0), }; @@ -1486,7 +1484,7 @@ static void __init exynos4_clk_init(struct device_node *np, exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12", _get_rate("sclk_apll"), _get_rate("sclk_mpll"), _get_rate("sclk_epll"), _get_rate("sclk_vpll"), - _get_rate("arm_clk")); + _get_rate("div_core2")); } diff --git a/drivers/clk/samsung/clk-exynos5260.c b/drivers/clk/samsung/clk-exynos5260.c index ce3de97e5f1..2527e39aadc 100644 --- a/drivers/clk/samsung/clk-exynos5260.c +++ b/drivers/clk/samsung/clk-exynos5260.c @@ -1581,7 +1581,7 @@ struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = { FRATE(PHYCLK_HDMI_LINK_O_TMDS_CLKHI, "phyclk_hdmi_link_o_tmds_clkhi", NULL, CLK_IS_ROOT, 125000000), FRATE(PHYCLK_MIPI_DPHY_4L_M_TXBYTECLKHS, - "phyclk_mipi_dphy_4l_m_txbyteclkhs" , NULL, + "phyclk_mipi_dphy_4l_m_txbyte_clkhs" , NULL, CLK_IS_ROOT, 187500000), FRATE(PHYCLK_DPTX_PHY_O_REF_CLK_24M, "phyclk_dptx_phy_o_ref_clk_24m", NULL, CLK_IS_ROOT, 24000000), diff --git a/drivers/clk/samsung/clk-s3c2410-dclk.c b/drivers/clk/samsung/clk-s3c2410-dclk.c index 0449cc0458e..f4f29ed6bd2 100644 --- a/drivers/clk/samsung/clk-s3c2410-dclk.c +++ b/drivers/clk/samsung/clk-s3c2410-dclk.c @@ -426,7 +426,6 @@ MODULE_DEVICE_TABLE(platform, s3c24xx_dclk_driver_ids); static struct platform_driver s3c24xx_dclk_driver = { .driver = { .name = "s3c24xx-dclk", - .owner = THIS_MODULE, .pm = &s3c24xx_dclk_pm_ops, }, .probe = s3c24xx_dclk_probe, diff --git a/drivers/clk/samsung/clk-s3c2412.c b/drivers/clk/samsung/clk-s3c2412.c index 34af09f6a15..2ceedaf8ce1 100644 --- a/drivers/clk/samsung/clk-s3c2412.c +++ b/drivers/clk/samsung/clk-s3c2412.c @@ -14,6 +14,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/syscore_ops.h> +#include <linux/reboot.h> #include <dt-bindings/clock/s3c2412.h> @@ -26,6 +27,7 @@ #define CLKCON 0x0c #define CLKDIVN 0x14 #define CLKSRC 0x1c +#define SWRST 0x30 /* list of PLLs to be registered */ enum s3c2412_plls { @@ -204,6 +206,28 @@ struct samsung_clock_alias s3c2412_aliases[] __initdata = { ALIAS(MSYSCLK, NULL, "fclk"), }; +static int s3c2412_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + /* errata "Watch-dog/Software Reset Problem" specifies that + * this reset must be done with the SYSCLK sourced from + * EXTCLK instead of FOUT to avoid a glitch in the reset + * mechanism. + * + * See the watchdog section of the S3C2412 manual for more + * information on this fix. + */ + + __raw_writel(0x00, reg_base + CLKSRC); + __raw_writel(0x533C2412, reg_base + SWRST); + return NOTIFY_DONE; +} + +static struct notifier_block s3c2412_restart_handler = { + .notifier_call = s3c2412_restart, + .priority = 129, +}; + /* * fixed rate clocks generated outside the soc * Only necessary until the devicetree-move is complete @@ -233,6 +257,7 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, unsigned long ext_f, void __iomem *base) { struct samsung_clk_provider *ctx; + int ret; reg_base = base; if (np) { @@ -267,6 +292,10 @@ void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f, s3c2412_clk_sleep_init(); samsung_clk_of_add_provider(np, ctx); + + ret = register_restart_handler(&s3c2412_restart_handler); + if (ret) + pr_warn("cannot register restart handler, %d\n", ret); } static void __init s3c2412_clk_init(struct device_node *np) diff --git a/drivers/clk/samsung/clk-s3c2443.c b/drivers/clk/samsung/clk-s3c2443.c index c92f853fca9..0c3c182b902 100644 --- a/drivers/clk/samsung/clk-s3c2443.c +++ b/drivers/clk/samsung/clk-s3c2443.c @@ -14,6 +14,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/syscore_ops.h> +#include <linux/reboot.h> #include <dt-bindings/clock/s3c2443.h> @@ -33,6 +34,7 @@ #define HCLKCON 0x30 #define PCLKCON 0x34 #define SCLKCON 0x38 +#define SWRST 0x44 /* the soc types */ enum supported_socs { @@ -354,6 +356,18 @@ struct samsung_clock_alias s3c2450_aliases[] __initdata = { ALIAS(PCLK_I2C1, "s3c2410-i2c.1", "i2c"), }; +static int s3c2443_restart(struct notifier_block *this, + unsigned long mode, void *cmd) +{ + __raw_writel(0x533c2443, reg_base + SWRST); + return NOTIFY_DONE; +} + +static struct notifier_block s3c2443_restart_handler = { + .notifier_call = s3c2443_restart, + .priority = 129, +}; + /* * fixed rate clocks generated outside the soc * Only necessary until the devicetree-move is complete @@ -378,6 +392,7 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, void __iomem *base) { struct samsung_clk_provider *ctx; + int ret; reg_base = base; if (np) { @@ -447,6 +462,10 @@ void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f, s3c2443_clk_sleep_init(); samsung_clk_of_add_provider(np, ctx); + + ret = register_restart_handler(&s3c2443_restart_handler); + if (ret) + pr_warn("cannot register restart handler, %d\n", ret); } static void __init s3c2416_clk_init(struct device_node *np) diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c index dff7f79a19b..e996425d06a 100644 --- a/drivers/clk/shmobile/clk-rcar-gen2.c +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -202,6 +202,7 @@ static const struct clk_div_table cpg_sdh_div_table[] = { }; static const struct clk_div_table cpg_sd01_div_table[] = { + { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 }, { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 }, }; diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 6850cba3587..7ddc2b55384 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -5,6 +5,8 @@ obj-y += clk-sunxi.o clk-factors.o obj-y += clk-a10-hosc.o obj-y += clk-a20-gmac.o +obj-y += clk-mod0.o +obj-y += clk-sun8i-mbus.o obj-$(CONFIG_MFD_SUN6I_PRCM) += \ clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 2057c8ac648..f83ba097126 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -9,18 +9,18 @@ */ #include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> #include <linux/module.h> +#include <linux/of_address.h> #include <linux/slab.h> -#include <linux/io.h> -#include <linux/err.h> #include <linux/string.h> -#include <linux/delay.h> - #include "clk-factors.h" /* - * DOC: basic adjustable factor-based clock that cannot gate + * DOC: basic adjustable factor-based clock * * Traits of this clock: * prepare - clk_prepare only ensures that parents are prepared @@ -32,6 +32,8 @@ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) +#define FACTORS_MAX_PARENTS 5 + #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) #define CLRMASK(len, pos) (~(SETMASK(len, pos))) #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) @@ -147,9 +149,96 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } -const struct clk_ops clk_factors_ops = { +static const struct clk_ops clk_factors_ops = { .determine_rate = clk_factors_determine_rate, .recalc_rate = clk_factors_recalc_rate, .round_rate = clk_factors_round_rate, .set_rate = clk_factors_set_rate, }; + +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock) +{ + struct clk *clk; + struct clk_factors *factors; + struct clk_gate *gate = NULL; + struct clk_mux *mux = NULL; + struct clk_hw *gate_hw = NULL; + struct clk_hw *mux_hw = NULL; + const char *clk_name = node->name; + const char *parents[FACTORS_MAX_PARENTS]; + void __iomem *reg; + int i = 0; + + reg = of_iomap(node, 0); + + /* if we have a mux, we will have >1 parents */ + while (i < FACTORS_MAX_PARENTS && + (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + /* + * some factor clocks, such as pll5 and pll6, may have multiple + * outputs, and have their name designated in factors_data + */ + if (data->name) + clk_name = data->name; + else + of_property_read_string(node, "clock-output-names", &clk_name); + + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) + return NULL; + + /* set up factors properties */ + factors->reg = reg; + factors->config = data->table; + factors->get_factors = data->getter; + factors->lock = lock; + + /* Add a gate if this factor clock can be gated */ + if (data->enable) { + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) { + kfree(factors); + return NULL; + } + + /* set up gate properties */ + gate->reg = reg; + gate->bit_idx = data->enable; + gate->lock = factors->lock; + gate_hw = &gate->hw; + } + + /* Add a mux if this factor clock can be muxed */ + if (data->mux) { + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); + if (!mux) { + kfree(factors); + kfree(gate); + return NULL; + } + + /* set up gate properties */ + mux->reg = reg; + mux->shift = data->mux; + mux->mask = SUNXI_FACTORS_MUX_MASK; + mux->lock = factors->lock; + mux_hw = &mux->hw; + } + + clk = clk_register_composite(NULL, clk_name, + parents, i, + mux_hw, &clk_mux_ops, + &factors->hw, &clk_factors_ops, + gate_hw, &clk_gate_ops, 0); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h index d2d0efa3937..9913840018d 100644 --- a/drivers/clk/sunxi/clk-factors.h +++ b/drivers/clk/sunxi/clk-factors.h @@ -3,9 +3,12 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/spinlock.h> #define SUNXI_FACTORS_NOT_APPLICABLE (0) +#define SUNXI_FACTORS_MUX_MASK 0x3 + struct clk_factors_config { u8 nshift; u8 nwidth; @@ -18,6 +21,14 @@ struct clk_factors_config { u8 n_start; }; +struct factors_data { + int enable; + int mux; + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); + const char *name; +}; + struct clk_factors { struct clk_hw hw; void __iomem *reg; @@ -26,5 +37,8 @@ struct clk_factors { spinlock_t *lock; }; -extern const struct clk_ops clk_factors_ops; +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock); + #endif diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c new file mode 100644 index 00000000000..4a563850ee6 --- /dev/null +++ b/drivers/clk/sunxi/clk-mod0.c @@ -0,0 +1,283 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +/** + * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks + * MOD0 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div, calcm, calcp; + + /* These clocks can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div < 16) + calcp = 0; + else if (div / 2 < 16) + calcp = 1; + else if (div / 4 < 16) + calcp = 2; + else + calcp = 3; + + calcm = DIV_ROUND_UP(div, 1 << calcp); + + *freq = (parent_rate >> calcp) / calcm; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm - 1; + *p = calcp; +} + +/* user manual says "n" but it's really "p" */ +static struct clk_factors_config sun4i_a10_mod0_config = { + .mshift = 0, + .mwidth = 4, + .pshift = 16, + .pwidth = 2, +}; + +static const struct factors_data sun4i_a10_mod0_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun4i_a10_mod0_config, + .getter = sun4i_a10_get_mod0_factors, +}; + +static DEFINE_SPINLOCK(sun4i_a10_mod0_lock); + +static void __init sun4i_a10_mod0_setup(struct device_node *node) +{ + sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock); +} +CLK_OF_DECLARE(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk", sun4i_a10_mod0_setup); + +static DEFINE_SPINLOCK(sun5i_a13_mbus_lock); + +static void __init sun5i_a13_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun5i_a13_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup); + +struct mmc_phase_data { + u8 offset; +}; + +struct mmc_phase { + struct clk_hw hw; + void __iomem *reg; + struct mmc_phase_data *data; + spinlock_t *lock; +}; + +#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw) + +static int mmc_get_phase(struct clk_hw *hw) +{ + struct clk *mmc, *mmc_parent, *clk = hw->clk; + struct mmc_phase *phase = to_mmc_phase(hw); + unsigned int mmc_rate, mmc_parent_rate; + u16 step, mmc_div; + u32 value; + u8 delay; + + value = readl(phase->reg); + delay = (value >> phase->data->offset) & 0x3; + + if (!delay) + return 180; + + /* Get the main MMC clock */ + mmc = clk_get_parent(clk); + if (!mmc) + return -EINVAL; + + /* And its rate */ + mmc_rate = clk_get_rate(mmc); + if (!mmc_rate) + return -EINVAL; + + /* Now, get the MMC parent (most likely some PLL) */ + mmc_parent = clk_get_parent(mmc); + if (!mmc_parent) + return -EINVAL; + + /* And its rate */ + mmc_parent_rate = clk_get_rate(mmc_parent); + if (!mmc_parent_rate) + return -EINVAL; + + /* Get MMC clock divider */ + mmc_div = mmc_parent_rate / mmc_rate; + + step = DIV_ROUND_CLOSEST(360, mmc_div); + return delay * step; +} + +static int mmc_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk *mmc, *mmc_parent, *clk = hw->clk; + struct mmc_phase *phase = to_mmc_phase(hw); + unsigned int mmc_rate, mmc_parent_rate; + unsigned long flags; + u32 value; + u8 delay; + + /* Get the main MMC clock */ + mmc = clk_get_parent(clk); + if (!mmc) + return -EINVAL; + + /* And its rate */ + mmc_rate = clk_get_rate(mmc); + if (!mmc_rate) + return -EINVAL; + + /* Now, get the MMC parent (most likely some PLL) */ + mmc_parent = clk_get_parent(mmc); + if (!mmc_parent) + return -EINVAL; + + /* And its rate */ + mmc_parent_rate = clk_get_rate(mmc_parent); + if (!mmc_parent_rate) + return -EINVAL; + + if (degrees != 180) { + u16 step, mmc_div; + + /* Get MMC clock divider */ + mmc_div = mmc_parent_rate / mmc_rate; + + /* + * We can only outphase the clocks by multiple of the + * PLL's period. + * + * Since the MMC clock in only a divider, and the + * formula to get the outphasing in degrees is deg = + * 360 * delta / period + * + * If we simplify this formula, we can see that the + * only thing that we're concerned about is the number + * of period we want to outphase our clock from, and + * the divider set by the MMC clock. + */ + step = DIV_ROUND_CLOSEST(360, mmc_div); + delay = DIV_ROUND_CLOSEST(degrees, step); + } else { + delay = 0; + } + + spin_lock_irqsave(phase->lock, flags); + value = readl(phase->reg); + value &= ~GENMASK(phase->data->offset + 3, phase->data->offset); + value |= delay << phase->data->offset; + writel(value, phase->reg); + spin_unlock_irqrestore(phase->lock, flags); + + return 0; +} + +static const struct clk_ops mmc_clk_ops = { + .get_phase = mmc_get_phase, + .set_phase = mmc_set_phase, +}; + +static void __init sun4i_a10_mmc_phase_setup(struct device_node *node, + struct mmc_phase_data *data) +{ + const char *parent_names[1] = { of_clk_get_parent_name(node, 0) }; + struct clk_init_data init = { + .num_parents = 1, + .parent_names = parent_names, + .ops = &mmc_clk_ops, + }; + + struct mmc_phase *phase; + struct clk *clk; + + phase = kmalloc(sizeof(*phase), GFP_KERNEL); + if (!phase) + return; + + phase->hw.init = &init; + + phase->reg = of_iomap(node, 0); + if (!phase->reg) + goto err_free; + + phase->data = data; + phase->lock = &sun4i_a10_mod0_lock; + + if (of_property_read_string(node, "clock-output-names", &init.name)) + init.name = node->name; + + clk = clk_register(NULL, &phase->hw); + if (IS_ERR(clk)) + goto err_unmap; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + return; + +err_unmap: + iounmap(phase->reg); +err_free: + kfree(phase); +} + + +static struct mmc_phase_data mmc_output_clk = { + .offset = 8, +}; + +static struct mmc_phase_data mmc_sample_clk = { + .offset = 20, +}; + +static void __init sun4i_a10_mmc_output_setup(struct device_node *node) +{ + sun4i_a10_mmc_phase_setup(node, &mmc_output_clk); +} +CLK_OF_DECLARE(sun4i_a10_mmc_output, "allwinner,sun4i-a10-mmc-output-clk", sun4i_a10_mmc_output_setup); + +static void __init sun4i_a10_mmc_sample_setup(struct device_node *node) +{ + sun4i_a10_mmc_phase_setup(node, &mmc_sample_clk); +} +CLK_OF_DECLARE(sun4i_a10_mmc_sample, "allwinner,sun4i-a10-mmc-sample-clk", sun4i_a10_mmc_sample_setup); diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c index e10d0521ec7..64f3e46d383 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -99,7 +99,6 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) static struct platform_driver sun6i_a31_apb0_gates_clk_driver = { .driver = { .name = "sun6i-a31-apb0-gates-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_apb0_gates_clk_dt_ids, }, .probe = sun6i_a31_apb0_gates_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-apb0.c b/drivers/clk/sunxi/clk-sun6i-apb0.c index 1fa23371c8c..70763600aea 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0.c @@ -65,7 +65,6 @@ static const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = { static struct platform_driver sun6i_a31_apb0_clk_driver = { .driver = { .name = "sun6i-a31-apb0-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_apb0_clk_dt_ids, }, .probe = sun6i_a31_apb0_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c index eca8ca025b6..acca53290be 100644 --- a/drivers/clk/sunxi/clk-sun6i-ar100.c +++ b/drivers/clk/sunxi/clk-sun6i-ar100.c @@ -221,7 +221,6 @@ static const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = { static struct platform_driver sun6i_a31_ar100_clk_driver = { .driver = { .name = "sun6i-a31-ar100-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_ar100_clk_dt_ids, }, .probe = sun6i_a31_ar100_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun8i-apb0.c b/drivers/clk/sunxi/clk-sun8i-apb0.c index 1f5ba9b4b8c..155d0022194 100644 --- a/drivers/clk/sunxi/clk-sun8i-apb0.c +++ b/drivers/clk/sunxi/clk-sun8i-apb0.c @@ -56,7 +56,6 @@ static const struct of_device_id sun8i_a23_apb0_clk_dt_ids[] = { static struct platform_driver sun8i_a23_apb0_clk_driver = { .driver = { .name = "sun8i-a23-apb0-clk", - .owner = THIS_MODULE, .of_match_table = sun8i_a23_apb0_clk_dt_ids, }, .probe = sun8i_a23_apb0_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c new file mode 100644 index 00000000000..8e49b44cee4 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun8i-mbus.c @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +/** + * sun8i_a23_get_mbus_factors() - calculates m factor for MBUS clocks + * MBUS rate is calculated as follows + * rate = parent_rate / (m + 1); + */ + +static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* + * These clocks can only divide, so we will never be able to + * achieve frequencies higher than the parent frequency + */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div > 8) + div = 8; + + *freq = parent_rate / div; + + /* we were called to round the frequency, we can now return */ + if (m == NULL) + return; + + *m = div - 1; +} + +static struct clk_factors_config sun8i_a23_mbus_config = { + .mshift = 0, + .mwidth = 3, +}; + +static const struct factors_data sun8i_a23_mbus_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun8i_a23_mbus_config, + .getter = sun8i_a23_get_mbus_factors, +}; + +static DEFINE_SPINLOCK(sun8i_a23_mbus_lock); + +static void __init sun8i_a23_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data, + &sun8i_a23_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index b654b7b1d13..d5dc951264c 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/reset-controller.h> +#include <linux/spinlock.h> #include "clk-factors.h" @@ -319,46 +320,6 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, -/** - * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks - * MOD0 rate is calculated as follows - * rate = (parent_rate >> p) / (m + 1); - */ - -static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, - u8 *n, u8 *k, u8 *m, u8 *p) -{ - u8 div, calcm, calcp; - - /* These clocks can only divide, so we will never be able to achieve - * frequencies higher than the parent frequency */ - if (*freq > parent_rate) - *freq = parent_rate; - - div = DIV_ROUND_UP(parent_rate, *freq); - - if (div < 16) - calcp = 0; - else if (div / 2 < 16) - calcp = 1; - else if (div / 4 < 16) - calcp = 2; - else - calcp = 3; - - calcm = DIV_ROUND_UP(div, 1 << calcp); - - *freq = (parent_rate >> calcp) / calcm; - - /* we were called to round the frequency, we can now return */ - if (n == NULL) - return; - - *m = calcm - 1; - *p = calcp; -} - - /** * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B @@ -440,16 +401,6 @@ EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); * sunxi_factors_clk_setup() - Setup function for factor clocks */ -#define SUNXI_FACTORS_MUX_MASK 0x3 - -struct factors_data { - int enable; - int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - const char *name; -}; - static struct clk_factors_config sun4i_pll1_config = { .nshift = 8, .nwidth = 5, @@ -504,14 +455,6 @@ static struct clk_factors_config sun4i_apb1_config = { }; /* user manual says "n" but it's really "p" */ -static struct clk_factors_config sun4i_mod0_config = { - .mshift = 0, - .mwidth = 4, - .pshift = 16, - .pwidth = 2, -}; - -/* user manual says "n" but it's really "p" */ static struct clk_factors_config sun7i_a20_out_config = { .mshift = 8, .mwidth = 5, @@ -568,13 +511,6 @@ static const struct factors_data sun4i_apb1_data __initconst = { .getter = sun4i_get_apb1_factors, }; -static const struct factors_data sun4i_mod0_data __initconst = { - .enable = 31, - .mux = 24, - .table = &sun4i_mod0_config, - .getter = sun4i_get_mod0_factors, -}; - static const struct factors_data sun7i_a20_out_data __initconst = { .enable = 31, .mux = 24, @@ -583,89 +519,9 @@ static const struct factors_data sun7i_a20_out_data __initconst = { }; static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) + const struct factors_data *data) { - struct clk *clk; - struct clk_factors *factors; - struct clk_gate *gate = NULL; - struct clk_mux *mux = NULL; - struct clk_hw *gate_hw = NULL; - struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; - const char *parents[SUNXI_MAX_PARENTS]; - void __iomem *reg; - int i = 0; - - reg = of_iomap(node, 0); - - /* if we have a mux, we will have >1 parents */ - while (i < SUNXI_MAX_PARENTS && - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - - /* - * some factor clocks, such as pll5 and pll6, may have multiple - * outputs, and have their name designated in factors_data - */ - if (data->name) - clk_name = data->name; - else - of_property_read_string(node, "clock-output-names", &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) - return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); - return NULL; - } - - /* set up gate properties */ - gate->reg = reg; - gate->bit_idx = data->enable; - gate->lock = &clk_lock; - gate_hw = &gate->hw; - } - - /* Add a mux if this factor clock can be muxed */ - if (data->mux) { - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) { - kfree(factors); - kfree(gate); - return NULL; - } - - /* set up gate properties */ - mux->reg = reg; - mux->shift = data->mux; - mux->mask = SUNXI_FACTORS_MUX_MASK; - mux->lock = &clk_lock; - mux_hw = &mux->hw; - } - - /* set up factors properties */ - factors->reg = reg; - factors->config = data->table; - factors->get_factors = data->getter; - factors->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, - gate_hw, &clk_gate_ops, 0); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } - - return clk; + return sunxi_factors_register(node, data, &clk_lock); } @@ -762,10 +618,19 @@ static const struct div_data sun4i_ahb_data __initconst = { .width = 2, }; +static const struct clk_div_table sun4i_apb0_table[] __initconst = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { } /* sentinel */ +}; + static const struct div_data sun4i_apb0_data __initconst = { .shift = 8, .pow = 1, .width = 2, + .table = sun4i_apb0_table, }; static const struct div_data sun6i_a31_apb2_div_data __initconst = { @@ -1199,7 +1064,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} }; @@ -1311,7 +1175,6 @@ static void __init sun4i_a10_init_clocks(struct device_node *node) CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); static const char *sun5i_critical_clocks[] __initdata = { - "mbus", "pll5_ddr", "ahb_sdram", }; diff --git a/drivers/clk/tegra/clk-tegra124.c b/drivers/clk/tegra/clk-tegra124.c index 9525c684d14..e3a85842ce0 100644 --- a/drivers/clk/tegra/clk-tegra124.c +++ b/drivers/clk/tegra/clk-tegra124.c @@ -1166,6 +1166,12 @@ static void __init tegra124_pll_init(void __iomem *clk_base, clk_register_clkdev(clk, "pll_c_out1", NULL); clks[TEGRA124_CLK_PLL_C_OUT1] = clk; + /* PLLC_UD */ + clk = clk_register_fixed_factor(NULL, "pll_c_ud", "pll_c", + CLK_SET_RATE_PARENT, 1, 1); + clk_register_clkdev(clk, "pll_c_ud", NULL); + clks[TEGRA124_CLK_PLL_C_UD] = clk; + /* PLLC2 */ clk = tegra_clk_register_pllc("pll_c2", "pll_ref", clk_base, pmc, 0, &pll_c2_params, NULL); @@ -1198,6 +1204,8 @@ static void __init tegra124_pll_init(void __iomem *clk_base, /* PLLM_UD */ clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m", CLK_SET_RATE_PARENT, 1, 1); + clk_register_clkdev(clk, "pll_m_ud", NULL); + clks[TEGRA124_CLK_PLL_M_UD] = clk; /* PLLU */ val = readl(clk_base + pll_u_params.base_reg); diff --git a/drivers/clk/tegra/clk.c b/drivers/clk/tegra/clk.c index f87c609e8f7..97dc8595c3c 100644 --- a/drivers/clk/tegra/clk.c +++ b/drivers/clk/tegra/clk.c @@ -207,8 +207,13 @@ void __init tegra_init_from_table(struct tegra_clk_init_table *tbl, for (; tbl->clk_id < clk_max; tbl++) { clk = clks[tbl->clk_id]; - if (IS_ERR_OR_NULL(clk)) - return; + if (IS_ERR_OR_NULL(clk)) { + pr_err("%s: invalid entry %ld in clks array for id %d\n", + __func__, PTR_ERR(clk), tbl->clk_id); + WARN_ON(1); + + continue; + } if (tbl->parent_id < clk_max) { struct clk *parent = clks[tbl->parent_id]; diff --git a/drivers/clk/ti/clk-dra7-atl.c b/drivers/clk/ti/clk-dra7-atl.c index af29359677d..59bb4b39d12 100644 --- a/drivers/clk/ti/clk-dra7-atl.c +++ b/drivers/clk/ti/clk-dra7-atl.c @@ -203,6 +203,7 @@ static void __init of_dra7_atl_clock_setup(struct device_node *node) if (!IS_ERR(clk)) { of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(parent_names); return; } cleanup: @@ -228,6 +229,7 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev) cinfo->iobase = of_iomap(node, 0); cinfo->dev = &pdev->dev; pm_runtime_enable(cinfo->dev); + pm_runtime_irq_safe(cinfo->dev); pm_runtime_get_sync(cinfo->dev); atl_write(cinfo, DRA7_ATL_PCLKMUX_REG(0), DRA7_ATL_PCLKMUX); @@ -301,7 +303,6 @@ MODULE_DEVICE_TABLE(of, of_dra7_atl_clk_match_tbl); static struct platform_driver dra7_atl_clk_driver = { .driver = { .name = "dra7-atl", - .owner = THIS_MODULE, .of_match_table = of_dra7_atl_clk_match_tbl, }, .probe = of_dra7_atl_clk_probe, diff --git a/drivers/clk/ti/clk.c b/drivers/clk/ti/clk.c index b1a6f7144f3..337abe5909e 100644 --- a/drivers/clk/ti/clk.c +++ b/drivers/clk/ti/clk.c @@ -25,8 +25,8 @@ #undef pr_fmt #define pr_fmt(fmt) "%s: " fmt, __func__ -static int ti_dt_clk_memmap_index; struct ti_clk_ll_ops *ti_clk_ll_ops; +static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS]; /** * ti_dt_clocks_register - register DT alias clocks during boot @@ -108,9 +108,21 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index) struct clk_omap_reg *reg; u32 val; u32 tmp; + int i; reg = (struct clk_omap_reg *)&tmp; - reg->index = ti_dt_clk_memmap_index; + + for (i = 0; i < CLK_MAX_MEMMAPS; i++) { + if (clocks_node_ptr[i] == node->parent) + break; + } + + if (i == CLK_MAX_MEMMAPS) { + pr_err("clk-provider not found for %s!\n", node->name); + return NULL; + } + + reg->index = i; if (of_property_read_u32_index(node, "reg", index, &val)) { pr_err("%s must have reg[%d]!\n", node->name, index); @@ -127,20 +139,14 @@ void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index) * @parent: master node * @index: internal index for clk_reg_ops * - * Initializes a master clock IP block and its child clock nodes. - * Regmap is provided for accessing the register space for the - * IP block and all the clocks under it. + * Initializes a master clock IP block. This basically sets up the + * mapping from clocks node to the memory map index. All the clocks + * are then initialized through the common of_clk_init call, and the + * clocks will access their memory maps based on the node layout. */ void ti_dt_clk_init_provider(struct device_node *parent, int index) { - const struct of_device_id *match; - struct device_node *np; struct device_node *clocks; - of_clk_init_cb_t clk_init_cb; - struct clk_init_item *retry; - struct clk_init_item *tmp; - - ti_dt_clk_memmap_index = index; /* get clocks for this parent */ clocks = of_get_child_by_name(parent, "clocks"); @@ -149,19 +155,31 @@ void ti_dt_clk_init_provider(struct device_node *parent, int index) return; } - for_each_child_of_node(clocks, np) { - match = of_match_node(&__clk_of_table, np); - if (!match) - continue; - clk_init_cb = (of_clk_init_cb_t)match->data; - pr_debug("%s: initializing: %s\n", __func__, np->name); - clk_init_cb(np); - } + /* add clocks node info */ + clocks_node_ptr[index] = clocks; +} - list_for_each_entry_safe(retry, tmp, &retry_list, link) { - pr_debug("retry-init: %s\n", retry->node->name); - retry->func(retry->hw, retry->node); - list_del(&retry->link); - kfree(retry); +/** + * ti_dt_clk_init_retry_clks - init clocks from the retry list + * + * Initializes any clocks that have failed to initialize before, + * reasons being missing parent node(s) during earlier init. This + * typically happens only for DPLLs which need to have both of their + * parent clocks ready during init. + */ +void ti_dt_clk_init_retry_clks(void) +{ + struct clk_init_item *retry; + struct clk_init_item *tmp; + int retries = 5; + + while (!list_empty(&retry_list) && retries) { + list_for_each_entry_safe(retry, tmp, &retry_list, link) { + pr_debug("retry-init: %s\n", retry->node->name); + retry->func(retry->hw, retry->node); + list_del(&retry->link); + kfree(retry); + } + retries--; } } diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c index f1e0038d76a..b4c5faccaec 100644 --- a/drivers/clk/ti/clockdomain.c +++ b/drivers/clk/ti/clockdomain.c @@ -36,6 +36,11 @@ static void __init of_ti_clockdomain_setup(struct device_node *node) for (i = 0; i < num_clks; i++) { clk = of_clk_get(node, i); + if (IS_ERR(clk)) { + pr_err("%s: Failed get %s' clock nr %d (%ld)\n", + __func__, node->full_name, i, PTR_ERR(clk)); + continue; + } if (__clk_get_flags(clk) & CLK_IS_BASIC) { pr_warn("can't setup clkdm for basic clk %s\n", __clk_get_name(clk)); diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c index a837f703be6..bff2b5b8ff5 100644 --- a/drivers/clk/ti/divider.c +++ b/drivers/clk/ti/divider.c @@ -300,8 +300,8 @@ static struct clk *_register_divider(struct device *dev, const char *name, return clk; } -static struct clk_div_table -__init *ti_clk_get_div_table(struct device_node *node) +static struct clk_div_table * +__init ti_clk_get_div_table(struct device_node *node) { struct clk_div_table *table; const __be32 *divspec; diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 246cf1226ea..9037bebd69f 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -85,24 +85,22 @@ static DEFINE_SPINLOCK(canmioclk_lock); static DEFINE_SPINLOCK(dbgclk_lock); static DEFINE_SPINLOCK(aperclk_lock); -static const char dummy_nm[] __initconst = "dummy_name"; - -static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"}; -static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"}; -static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"}; -static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm}; -static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm}; -static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate", +static const char *armpll_parents[] __initconst = {"armpll_int", "ps_clk"}; +static const char *ddrpll_parents[] __initconst = {"ddrpll_int", "ps_clk"}; +static const char *iopll_parents[] __initconst = {"iopll_int", "ps_clk"}; +static const char *gem0_mux_parents[] __initconst = {"gem0_div1", "dummy_name"}; +static const char *gem1_mux_parents[] __initconst = {"gem1_div1", "dummy_name"}; +static const char *can0_mio_mux2_parents[] __initconst = {"can0_gate", "can0_mio_mux"}; -static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate", +static const char *can1_mio_mux2_parents[] __initconst = {"can1_gate", "can1_mio_mux"}; -static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", - dummy_nm}; +static const char *dbg_emio_mux_parents[] __initconst = {"dbg_div", + "dummy_name"}; -static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"}; -static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"}; -static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"}; -static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"}; +static const char *dbgtrc_emio_input_names[] __initconst = {"trace_emio_clk"}; +static const char *gem0_emio_input_names[] __initconst = {"gem0_emio_clk"}; +static const char *gem1_emio_input_names[] __initconst = {"gem1_emio_clk"}; +static const char *swdt_ext_clk_input_names[] __initconst = {"swdt_ext_clk"}; static void __init zynq_clk_register_fclk(enum zynq_clk fclk, const char *clk_name, void __iomem *fclk_ctrl_reg, @@ -230,6 +228,7 @@ static void __init zynq_clk_setup(struct device_node *np) const char *periph_parents[4]; const char *swdt_ext_clk_mux_parents[2]; const char *can_mio_mux_parents[NUM_MIO_PINS]; + const char *dummy_nm = "dummy_name"; pr_info("Zynq clock init\n"); @@ -619,5 +618,4 @@ void __init zynq_clock_init(void) np_err: of_node_put(np); BUG(); - return; } diff --git a/drivers/clk/zynq/pll.c b/drivers/clk/zynq/pll.c index cec97596fe6..00d72fb5c03 100644 --- a/drivers/clk/zynq/pll.c +++ b/drivers/clk/zynq/pll.c @@ -211,10 +211,8 @@ struct clk *clk_register_zynq_pll(const char *name, const char *parent, }; pll = kmalloc(sizeof(*pll), GFP_KERNEL); - if (!pll) { - pr_err("%s: Could not allocate Zynq PLL clk.\n", __func__); + if (!pll) return ERR_PTR(-ENOMEM); - } /* Populate the struct */ pll->hw.init = &initd; diff --git a/drivers/cpufreq/kirkwood-cpufreq.c b/drivers/cpufreq/kirkwood-cpufreq.c index 37a480680cd..7906d4acfe4 100644 --- a/drivers/cpufreq/kirkwood-cpufreq.c +++ b/drivers/cpufreq/kirkwood-cpufreq.c @@ -12,7 +12,6 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/clk.h> -#include <linux/clk-provider.h> #include <linux/cpufreq.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -39,8 +38,7 @@ static struct priv * - cpu clk * - ddr clk * - * The frequencies are set at runtime before registering this * - * table. + * The frequencies are set at runtime before registering this table. */ static struct cpufreq_frequency_table kirkwood_freq_table[] = { {0, STATE_CPU_FREQ, 0}, /* CPU uses cpuclk */ @@ -50,9 +48,7 @@ static struct cpufreq_frequency_table kirkwood_freq_table[] = { static unsigned int kirkwood_cpufreq_get_cpu_frequency(unsigned int cpu) { - if (__clk_is_enabled(priv.powersave_clk)) - return kirkwood_freq_table[1].frequency; - return kirkwood_freq_table[0].frequency; + return clk_get_rate(priv.powersave_clk) / 1000; } static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, @@ -70,10 +66,10 @@ static int kirkwood_cpufreq_target(struct cpufreq_policy *policy, switch (state) { case STATE_CPU_FREQ: - clk_disable(priv.powersave_clk); + clk_set_parent(priv.powersave_clk, priv.cpu_clk); break; case STATE_DDR_FREQ: - clk_enable(priv.powersave_clk); + clk_set_parent(priv.powersave_clk, priv.ddr_clk); break; } @@ -150,7 +146,7 @@ static int kirkwood_cpufreq_probe(struct platform_device *pdev) err = PTR_ERR(priv.powersave_clk); goto out_ddr; } - clk_prepare(priv.powersave_clk); + clk_prepare_enable(priv.powersave_clk); of_node_put(np); np = NULL; diff --git a/include/asm-generic/clkdev.h b/include/asm-generic/clkdev.h index 90a32a61dd2..4ff334749ed 100644 --- a/include/asm-generic/clkdev.h +++ b/include/asm-generic/clkdev.h @@ -15,10 +15,12 @@ #include <linux/slab.h> +#ifndef CONFIG_COMMON_CLK struct clk; static inline int __clk_get(struct clk *clk) { return 1; } static inline void __clk_put(struct clk *clk) { } +#endif static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) { diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h index b535e9da7de..961b9c130ea 100644 --- a/include/dt-bindings/clock/exynos3250.h +++ b/include/dt-bindings/clock/exynos3250.h @@ -255,4 +255,31 @@ */ #define CLK_NR_CLKS 248 +/* + * CMU DMC + */ + +#define CLK_FOUT_BPLL 1 +#define CLK_FOUT_EPLL 2 + +/* Muxes */ +#define CLK_MOUT_MPLL_MIF 8 +#define CLK_MOUT_BPLL 9 +#define CLK_MOUT_DPHY 10 +#define CLK_MOUT_DMC_BUS 11 +#define CLK_MOUT_EPLL 12 + +/* Dividers */ +#define CLK_DIV_DMC 16 +#define CLK_DIV_DPHY 17 +#define CLK_DIV_DMC_PRE 18 +#define CLK_DIV_DMCP 19 +#define CLK_DIV_DMCD 20 + +/* + * Total number of clocks of main CMU. + * NOTE: Must be equal to last clock ID increased by one. + */ +#define NR_CLKS_DMC 21 + #endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */ diff --git a/include/dt-bindings/clock/exynos4.h b/include/dt-bindings/clock/exynos4.h index 459bd2bd411..34fe28c622d 100644 --- a/include/dt-bindings/clock/exynos4.h +++ b/include/dt-bindings/clock/exynos4.h @@ -115,11 +115,11 @@ #define CLK_SMMU_MFCR 275 #define CLK_G3D 276 #define CLK_G2D 277 -#define CLK_ROTATOR 278 /* Exynos4210 only */ -#define CLK_MDMA 279 /* Exynos4210 only */ -#define CLK_SMMU_G2D 280 /* Exynos4210 only */ -#define CLK_SMMU_ROTATOR 281 /* Exynos4210 only */ -#define CLK_SMMU_MDMA 282 /* Exynos4210 only */ +#define CLK_ROTATOR 278 +#define CLK_MDMA 279 +#define CLK_SMMU_G2D 280 +#define CLK_SMMU_ROTATOR 281 +#define CLK_SMMU_MDMA 282 #define CLK_FIMD0 283 #define CLK_MIE0 284 #define CLK_MDNIE0 285 /* Exynos4412 only */ @@ -234,6 +234,8 @@ #define CLK_MOUT_G3D1 393 #define CLK_MOUT_G3D 394 #define CLK_ACLK400_MCUISP 395 /* Exynos4x12 only */ +#define CLK_MOUT_HDMI 396 +#define CLK_MOUT_MIXER 397 /* gate clocks - ppmu */ #define CLK_PPMULEFT 400 diff --git a/include/dt-bindings/clock/hix5hd2-clock.h b/include/dt-bindings/clock/hix5hd2-clock.h index aad579a7580..fd29c174ba6 100644 --- a/include/dt-bindings/clock/hix5hd2-clock.h +++ b/include/dt-bindings/clock/hix5hd2-clock.h @@ -46,6 +46,7 @@ #define HIX5HD2_SFC_MUX 64 #define HIX5HD2_MMC_MUX 65 #define HIX5HD2_FEPHY_MUX 66 +#define HIX5HD2_SD_MUX 67 /* gate clocks */ #define HIX5HD2_SFC_RST 128 @@ -53,6 +54,32 @@ #define HIX5HD2_MMC_CIU_CLK 130 #define HIX5HD2_MMC_BIU_CLK 131 #define HIX5HD2_MMC_CIU_RST 132 +#define HIX5HD2_FWD_BUS_CLK 133 +#define HIX5HD2_FWD_SYS_CLK 134 +#define HIX5HD2_MAC0_PHY_CLK 135 +#define HIX5HD2_SD_CIU_CLK 136 +#define HIX5HD2_SD_BIU_CLK 137 +#define HIX5HD2_SD_CIU_RST 138 +#define HIX5HD2_WDG0_CLK 139 +#define HIX5HD2_WDG0_RST 140 +#define HIX5HD2_I2C0_CLK 141 +#define HIX5HD2_I2C0_RST 142 +#define HIX5HD2_I2C1_CLK 143 +#define HIX5HD2_I2C1_RST 144 +#define HIX5HD2_I2C2_CLK 145 +#define HIX5HD2_I2C2_RST 146 +#define HIX5HD2_I2C3_CLK 147 +#define HIX5HD2_I2C3_RST 148 +#define HIX5HD2_I2C4_CLK 149 +#define HIX5HD2_I2C4_RST 150 +#define HIX5HD2_I2C5_CLK 151 +#define HIX5HD2_I2C5_RST 152 + +/* complex */ +#define HIX5HD2_MAC0_CLK 192 +#define HIX5HD2_MAC1_CLK 193 +#define HIX5HD2_SATA_CLK 194 +#define HIX5HD2_USB_CLK 195 #define HIX5HD2_NR_CLKS 256 #endif /* __DTS_HIX5HD2_CLOCK_H */ diff --git a/include/dt-bindings/clock/maxim,max77686.h b/include/dt-bindings/clock/maxim,max77686.h new file mode 100644 index 00000000000..7b28b090586 --- /dev/null +++ b/include/dt-bindings/clock/maxim,max77686.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 77686 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX77686_CLK_AP 0 +#define MAX77686_CLK_CP 1 +#define MAX77686_CLK_PMIC 2 + +/* Total number of clocks. */ +#define MAX77686_CLKS_NUM (MAX77686_CLK_PMIC + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77686_CLOCK_H */ diff --git a/include/dt-bindings/clock/maxim,max77802.h b/include/dt-bindings/clock/maxim,max77802.h new file mode 100644 index 00000000000..997312edcbb --- /dev/null +++ b/include/dt-bindings/clock/maxim,max77802.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Device Tree binding constants clocks for the Maxim 77802 PMIC. + */ + +#ifndef _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H +#define _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H + +/* Fixed rate clocks. */ + +#define MAX77802_CLK_32K_AP 0 +#define MAX77802_CLK_32K_CP 1 + +/* Total number of clocks. */ +#define MAX77802_CLKS_NUM (MAX77802_CLK_32K_CP + 1) + +#endif /* _DT_BINDINGS_CLOCK_MAXIM_MAX77802_CLOCK_H */ diff --git a/include/dt-bindings/clock/pxa-clock.h b/include/dt-bindings/clock/pxa-clock.h new file mode 100644 index 00000000000..e65803b1dc7 --- /dev/null +++ b/include/dt-bindings/clock/pxa-clock.h @@ -0,0 +1,77 @@ +/* + * Inspired by original work from pxa2xx-regs.h by Nicolas Pitre + * Copyright (C) 2014 Robert Jarzmik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __DT_BINDINGS_CLOCK_PXA2XX_H__ +#define __DT_BINDINGS_CLOCK_PXA2XX_H__ + +#define CLK_NONE 0 +#define CLK_1WIRE 1 +#define CLK_AC97 2 +#define CLK_AC97CONF 3 +#define CLK_ASSP 4 +#define CLK_BOOT 5 +#define CLK_BTUART 6 +#define CLK_CAMERA 7 +#define CLK_CIR 8 +#define CLK_CORE 9 +#define CLK_DMC 10 +#define CLK_FFUART 11 +#define CLK_FICP 12 +#define CLK_GPIO 13 +#define CLK_HSIO2 14 +#define CLK_HWUART 15 +#define CLK_I2C 16 +#define CLK_I2S 17 +#define CLK_IM 18 +#define CLK_INC 19 +#define CLK_ISC 20 +#define CLK_KEYPAD 21 +#define CLK_LCD 22 +#define CLK_MEMC 23 +#define CLK_MEMSTK 24 +#define CLK_MINI_IM 25 +#define CLK_MINI_LCD 26 +#define CLK_MMC 27 +#define CLK_MMC1 28 +#define CLK_MMC2 29 +#define CLK_MMC3 30 +#define CLK_MSL 31 +#define CLK_MSL0 32 +#define CLK_MVED 33 +#define CLK_NAND 34 +#define CLK_NSSP 35 +#define CLK_OSTIMER 36 +#define CLK_PWM0 37 +#define CLK_PWM1 38 +#define CLK_PWM2 39 +#define CLK_PWM3 40 +#define CLK_PWRI2C 41 +#define CLK_PXA300_GCU 42 +#define CLK_PXA320_GCU 43 +#define CLK_SMC 44 +#define CLK_SSP 45 +#define CLK_SSP1 46 +#define CLK_SSP2 47 +#define CLK_SSP3 48 +#define CLK_SSP4 49 +#define CLK_STUART 50 +#define CLK_TOUCH 51 +#define CLK_TPM 52 +#define CLK_UDC 53 +#define CLK_USB 54 +#define CLK_USB2 55 +#define CLK_USBH 56 +#define CLK_USBHOST 57 +#define CLK_USIM 58 +#define CLK_USIM1 59 +#define CLK_USMI0 60 +#define CLK_MAX 61 + +#endif diff --git a/include/dt-bindings/clock/rk3188-cru-common.h b/include/dt-bindings/clock/rk3188-cru-common.h index 750ee60e75f..6a370503c95 100644 --- a/include/dt-bindings/clock/rk3188-cru-common.h +++ b/include/dt-bindings/clock/rk3188-cru-common.h @@ -20,6 +20,7 @@ #define PLL_GPLL 4 #define CORE_PERI 5 #define CORE_L2C 6 +#define ARMCLK 7 /* sclk gates (special clocks) */ #define SCLK_UART0 64 diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h index ebcb460ea4a..100a08c4769 100644 --- a/include/dt-bindings/clock/rk3288-cru.h +++ b/include/dt-bindings/clock/rk3288-cru.h @@ -19,6 +19,7 @@ #define PLL_CPLL 3 #define PLL_GPLL 4 #define PLL_NPLL 5 +#define ARMCLK 6 /* sclk gates (special clocks) */ #define SCLK_GPU 64 @@ -61,6 +62,15 @@ #define SCLK_LCDC_PWM1 101 #define SCLK_MAC_RX 102 #define SCLK_MAC_TX 103 +#define SCLK_EDP_24M 104 +#define SCLK_EDP 105 +#define SCLK_RGA 106 +#define SCLK_ISP 107 +#define SCLK_ISP_JPE 108 +#define SCLK_HDMI_HDCP 109 +#define SCLK_HDMI_CEC 110 +#define SCLK_HEVC_CABAC 111 +#define SCLK_HEVC_CORE 112 #define DCLK_VOP0 190 #define DCLK_VOP1 191 @@ -75,6 +85,16 @@ #define ACLK_VOP1 198 #define ACLK_CRYPTO 199 #define ACLK_RGA 200 +#define ACLK_RGA_NIU 201 +#define ACLK_IEP 202 +#define ACLK_VIO0_NIU 203 +#define ACLK_VIP 204 +#define ACLK_ISP 205 +#define ACLK_VIO1_NIU 206 +#define ACLK_HEVC 207 +#define ACLK_VCODEC 208 +#define ACLK_CPU 209 +#define ACLK_PERI 210 /* pclk gates */ #define PCLK_GPIO0 320 @@ -112,6 +132,15 @@ #define PCLK_PS2C 352 #define PCLK_TIMER 353 #define PCLK_TZPC 354 +#define PCLK_EDP_CTRL 355 +#define PCLK_MIPI_DSI0 356 +#define PCLK_MIPI_DSI1 357 +#define PCLK_MIPI_CSI 358 +#define PCLK_LVDS_PHY 359 +#define PCLK_HDMI_CTRL 360 +#define PCLK_VIO2_H2P 361 +#define PCLK_CPU 362 +#define PCLK_PERI 363 /* hclk gates */ #define HCLK_GPS 448 @@ -137,8 +166,16 @@ #define HCLK_IEP 468 #define HCLK_ISP 469 #define HCLK_RGA 470 +#define HCLK_VIO_AHB_ARBI 471 +#define HCLK_VIO_NIU 472 +#define HCLK_VIP 473 +#define HCLK_VIO2_H2P 474 +#define HCLK_HEVC 475 +#define HCLK_VCODEC 476 +#define HCLK_CPU 477 +#define HCLK_PERI 478 -#define CLK_NR_CLKS (HCLK_RGA + 1) +#define CLK_NR_CLKS (HCLK_PERI + 1) /* soft-reset indices */ #define SRST_CORE0 0 @@ -276,3 +313,46 @@ #define SRST_USBHOST1_CON 140 #define SRST_USB_ADP 141 #define SRST_ACC_EFUSE 142 + +#define SRST_CORESIGHT 144 +#define SRST_PD_CORE_AHB_NOC 145 +#define SRST_PD_CORE_APB_NOC 146 +#define SRST_PD_CORE_MP_AXI 147 +#define SRST_GIC 148 +#define SRST_LCDC_PWM0 149 +#define SRST_LCDC_PWM1 150 +#define SRST_VIO0_H2P_BRG 151 +#define SRST_VIO1_H2P_BRG 152 +#define SRST_RGA_H2P_BRG 153 +#define SRST_HEVC 154 +#define SRST_TSADC 159 + +#define SRST_DDRPHY0 160 +#define SRST_DDRPHY0_APB 161 +#define SRST_DDRCTRL0 162 +#define SRST_DDRCTRL0_APB 163 +#define SRST_DDRPHY0_CTRL 164 +#define SRST_DDRPHY1 165 +#define SRST_DDRPHY1_APB 166 +#define SRST_DDRCTRL1 167 +#define SRST_DDRCTRL1_APB 168 +#define SRST_DDRPHY1_CTRL 169 +#define SRST_DDRMSCH0 170 +#define SRST_DDRMSCH1 171 +#define SRST_CRYPTO 174 +#define SRST_C2C_HOST 175 + +#define SRST_LCDC1_AXI 176 +#define SRST_LCDC1_AHB 177 +#define SRST_LCDC1_DCLK 178 +#define SRST_UART0 179 +#define SRST_UART1 180 +#define SRST_UART2 181 +#define SRST_UART3 182 +#define SRST_UART4 183 +#define SRST_SIMC 186 +#define SRST_PS2C 187 +#define SRST_TSP 188 +#define SRST_TSP_CLKIN0 189 +#define SRST_TSP_CLKIN1 190 +#define SRST_TSP_27M 191 diff --git a/include/dt-bindings/clock/tegra124-car.h b/include/dt-bindings/clock/tegra124-car.h index 8a4c5892890..6bac637fd63 100644 --- a/include/dt-bindings/clock/tegra124-car.h +++ b/include/dt-bindings/clock/tegra124-car.h @@ -337,6 +337,10 @@ #define TEGRA124_CLK_DSIB_MUX 310 #define TEGRA124_CLK_SOR0_LVDS 311 #define TEGRA124_CLK_XUSB_SS_DIV2 312 -#define TEGRA124_CLK_CLK_MAX 313 + +#define TEGRA124_CLK_PLL_M_UD 313 +#define TEGRA124_CLK_PLL_C_UD 314 + +#define TEGRA124_CLK_CLK_MAX 315 #endif /* _DT_BINDINGS_CLOCK_TEGRA124_CAR_H */ diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h index efbf70b9fd8..0ca5f604692 100644 --- a/include/linux/clk-private.h +++ b/include/linux/clk-private.h @@ -46,8 +46,10 @@ struct clk { unsigned int enable_count; unsigned int prepare_count; unsigned long accuracy; + int phase; struct hlist_head children; struct hlist_node child_node; + struct hlist_node debug_node; unsigned int notifier_count; #ifdef CONFIG_DEBUG_FS struct dentry *dentry; diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 411dd7eb265..be21af149f1 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -13,6 +13,7 @@ #include <linux/clk.h> #include <linux/io.h> +#include <linux/of.h> #ifdef CONFIG_COMMON_CLK @@ -129,6 +130,14 @@ struct dentry; * set then clock accuracy will be initialized to parent accuracy * or 0 (perfect clock) if clock has no parent. * + * @get_phase: Queries the hardware to get the current phase of a clock. + * Returned values are 0-359 degrees on success, negative + * error codes on failure. + * + * @set_phase: Shift the phase this clock signal in degrees specified + * by the second argument. Valid values for degrees are + * 0-359. Return 0 on success, otherwise -EERROR. + * * @init: Perform platform-specific initialization magic. * This is not not used by any of the basic clock types. * Please consider other ways of solving initialization problems @@ -177,6 +186,8 @@ struct clk_ops { unsigned long parent_rate, u8 index); unsigned long (*recalc_accuracy)(struct clk_hw *hw, unsigned long parent_accuracy); + int (*get_phase)(struct clk_hw *hw); + int (*set_phase)(struct clk_hw *hw, int degrees); void (*init)(struct clk_hw *hw); int (*debug_init)(struct clk_hw *hw, struct dentry *dentry); }; @@ -488,6 +499,28 @@ struct clk *clk_register_composite(struct device *dev, const char *name, struct clk_hw *gate_hw, const struct clk_ops *gate_ops, unsigned long flags); +/*** + * struct clk_gpio_gate - gpio gated clock + * + * @hw: handle between common and hardware-specific interfaces + * @gpiod: gpio descriptor + * + * Clock with a gpio control for enabling and disabling the parent clock. + * Implements .enable, .disable and .is_enabled + */ + +struct clk_gpio { + struct clk_hw hw; + struct gpio_desc *gpiod; +}; + +extern const struct clk_ops clk_gpio_gate_ops; +struct clk *clk_register_gpio_gate(struct device *dev, const char *name, + const char *parent_name, struct gpio_desc *gpio, + unsigned long flags); + +void of_gpio_clk_gate_setup(struct device_node *node); + /** * clk_register - allocate a new clock, register it and return an opaque cookie * @dev: device that is registering this clock diff --git a/include/linux/clk.h b/include/linux/clk.h index afb44bfaf8d..c7f258a8176 100644 --- a/include/linux/clk.h +++ b/include/linux/clk.h @@ -106,6 +106,25 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb); */ long clk_get_accuracy(struct clk *clk); +/** + * clk_set_phase - adjust the phase shift of a clock signal + * @clk: clock signal source + * @degrees: number of degrees the signal is shifted + * + * Shifts the phase of a clock signal by the specified degrees. Returns 0 on + * success, -EERROR otherwise. + */ +int clk_set_phase(struct clk *clk, int degrees); + +/** + * clk_get_phase - return the phase shift of a clock signal + * @clk: clock signal source + * + * Returns the phase shift of a clock node in degrees, otherwise returns + * -EERROR. + */ +int clk_get_phase(struct clk *clk); + #else static inline long clk_get_accuracy(struct clk *clk) @@ -113,6 +132,16 @@ static inline long clk_get_accuracy(struct clk *clk) return -ENOTSUPP; } +static inline long clk_set_phase(struct clk *clk, int phase) +{ + return -ENOTSUPP; +} + +static inline long clk_get_phase(struct clk *clk) +{ + return -ENOTSUPP; +} + #endif /** diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index e8d8a35034a..f75acbf70e9 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -292,6 +292,7 @@ void omap2xxx_clkt_vps_init(void); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, int index); +void ti_dt_clk_init_retry_clks(void); void ti_dt_clockdomains_setup(void); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); |