diff options
| -rw-r--r-- | arch/arm/mach-omap2/dss-common.c | 53 |
1 files changed, 16 insertions, 37 deletions
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 9c49bbe825f..b073e8b651b 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -177,45 +177,12 @@ static struct picodlp_panel_data sdp4430_picodlp_pdata = { .pwrgood_gpio = 45, }; -static void sdp4430_picodlp_init(void) -{ - int r; - const struct gpio picodlp_gpios[] = { - {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"}, - {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN, - "DLP EMU DONE"}, - {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW, - "DLP PWRGOOD"}, - }; - - r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios)); - if (r) - pr_err("Cannot request PicoDLP GPIOs, error %d\n", r); -} - -static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DISPLAY_SEL_GPIO, 0); - gpio_set_value(DLP_POWER_ON_GPIO, 1); - - return 0; -} - -static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev) -{ - gpio_set_value(DLP_POWER_ON_GPIO, 0); - gpio_set_value(DISPLAY_SEL_GPIO, 1); -} - static struct omap_dss_device sdp4430_picodlp_device = { .name = "picodlp", .driver_name = "picodlp_panel", .type = OMAP_DISPLAY_TYPE_DPI, .phy.dpi.data_lines = 24, .channel = OMAP_DSS_CHANNEL_LCD2, - .platform_enable = sdp4430_panel_enable_picodlp, - .platform_disable = sdp4430_panel_disable_picodlp, .data = &sdp4430_picodlp_pdata, }; @@ -232,17 +199,26 @@ static struct omap_dss_board_info sdp4430_dss_data = { .default_device = &sdp4430_lcd_device, }; +/* + * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO. + * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails + * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is + * selected by default + */ void __init omap_4430sdp_display_init(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); /* * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and @@ -262,12 +238,15 @@ void __init omap_4430sdp_display_init_of(void) { int r; - /* Enable LCD2 by default (instead of Pico DLP) */ r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, "display_sel"); if (r) pr_err("%s: Could not get display_sel GPIO\n", __func__); - sdp4430_picodlp_init(); + r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, + "DLP POWER ON"); + if (r) + pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); + omap_display_init(&sdp4430_dss_data); } |