diff options
-rw-r--r-- | Documentation/devicetree/bindings/extcon/extcon-sm5502.txt | 23 | ||||
-rw-r--r-- | drivers/extcon/Kconfig | 38 | ||||
-rw-r--r-- | drivers/extcon/Makefile | 7 | ||||
-rw-r--r-- | drivers/extcon/extcon-adc-jack.c | 1 | ||||
-rw-r--r-- | drivers/extcon/extcon-arizona.c | 74 | ||||
-rw-r--r-- | drivers/extcon/extcon-class.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-gpio.c | 1 | ||||
-rw-r--r-- | drivers/extcon/extcon-max14577.c | 5 | ||||
-rw-r--r-- | drivers/extcon/extcon-max77693.c | 41 | ||||
-rw-r--r-- | drivers/extcon/extcon-max8997.c | 5 | ||||
-rw-r--r-- | drivers/extcon/extcon-palmas.c | 3 | ||||
-rw-r--r-- | drivers/extcon/extcon-sm5502.c | 724 | ||||
-rw-r--r-- | drivers/mfd/Kconfig | 1 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 2 | ||||
-rw-r--r-- | drivers/mfd/max77693-irq.c | 336 | ||||
-rw-r--r-- | drivers/mfd/max77693.c | 210 | ||||
-rw-r--r-- | drivers/regulator/max77693.c | 12 | ||||
-rw-r--r-- | include/linux/extcon/sm5502.h | 287 | ||||
-rw-r--r-- | include/linux/mfd/arizona/pdata.h | 3 | ||||
-rw-r--r-- | include/linux/mfd/max77693-private.h | 54 |
20 files changed, 1335 insertions, 494 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt new file mode 100644 index 00000000000..4ecda224955 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt @@ -0,0 +1,23 @@ + +* SM5502 MUIC (Micro-USB Interface Controller) device + +The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device +which can detect the state of external accessory when external accessory is +attached or detached and button is pressed or released. It is interfaced to +the host controller using an I2C interface. + +Required properties: +- compatible: Should be "siliconmitus,sm5502-muic" +- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25 +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from sm5502 are delivered to. +- interrupts: Interrupt specifiers for detection interrupt sources. + +Example: + + sm5502@25 { + compatible = "siliconmitus,sm5502-muic"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x25>; + }; diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index aebde489c29..6f2f4727de2 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -14,6 +14,20 @@ if EXTCON comment "Extcon Device Drivers" +config EXTCON_ADC_JACK + tristate "ADC Jack extcon support" + depends on IIO + help + Say Y here to enable extcon device driver based on ADC values. + +config EXTCON_ARIZONA + tristate "Wolfson Arizona EXTCON support" + depends on MFD_ARIZONA && INPUT && SND_SOC + help + Say Y here to enable support for external accessory detection + with Wolfson Arizona devices. These are audio CODECs with + advanced audio accessory detection support. + config EXTCON_GPIO tristate "GPIO extcon support" depends on GPIOLIB @@ -21,12 +35,6 @@ config EXTCON_GPIO Say Y here to enable GPIO based extcon support. Note that GPIO extcon supports single state per extcon instance. -config EXTCON_ADC_JACK - tristate "ADC Jack extcon support" - depends on IIO - help - Say Y here to enable extcon device driver based on ADC values. - config EXTCON_MAX14577 tristate "MAX14577/77836 EXTCON Support" depends on MFD_MAX14577 @@ -55,14 +63,6 @@ config EXTCON_MAX8997 Maxim MAX8997 PMIC. The MAX8997 MUIC is a USB port accessory detector and switch. -config EXTCON_ARIZONA - tristate "Wolfson Arizona EXTCON support" - depends on MFD_ARIZONA && INPUT && SND_SOC - help - Say Y here to enable support for external accessory detection - with Wolfson Arizona devices. These are audio CODECs with - advanced audio accessory detection support. - config EXTCON_PALMAS tristate "Palmas USB EXTCON support" depends on MFD_PALMAS @@ -70,4 +70,14 @@ config EXTCON_PALMAS Say Y here to enable support for USB peripheral and USB host detection by palmas usb. +config EXTCON_SM5502 + tristate "SM5502 EXTCON support" + select IRQ_DOMAIN + select REGMAP_I2C + select REGMAP_IRQ + help + If you say yes here you get support for the MUIC device of + Silicon Mitus SM5502. The SM5502 is a USB port accessory + detector and switch. + endif # MULTISTATE_SWITCH diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index bf7861ec090..b38546eb522 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -1,12 +1,13 @@ -# + # Makefile for external connector class (extcon) devices # obj-$(CONFIG_EXTCON) += extcon-class.o -obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o +obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o +obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o obj-$(CONFIG_EXTCON_MAX8997) += extcon-max8997.o -obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o +obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index e18f95be373..d860229e4de 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -112,7 +112,6 @@ static int adc_jack_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to allocate extcon device\n"); return -ENOMEM; } - data->edev->dev.parent = &pdev->dev; data->edev->name = pdata->name; /* Check the length of array and set num_cables */ diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 6c84e3d1204..ba51588cc00 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -39,6 +39,11 @@ #define ARIZONA_ACCDET_MODE_HPL 1 #define ARIZONA_ACCDET_MODE_HPR 2 +#define ARIZONA_MICD_CLAMP_MODE_JDL 0x4 +#define ARIZONA_MICD_CLAMP_MODE_JDH 0x5 +#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9 +#define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb + #define ARIZONA_HPDET_MAX 10000 #define HPDET_DEBOUNCE 500 @@ -324,14 +329,17 @@ static void arizona_stop_mic(struct arizona_extcon_info *info) } static struct { + unsigned int threshold; unsigned int factor_a; unsigned int factor_b; } arizona_hpdet_b_ranges[] = { - { 5528, 362464 }, - { 11084, 6186851 }, - { 11065, 65460395 }, + { 100, 5528, 362464 }, + { 169, 11084, 6186851 }, + { 169, 11065, 65460395 }, }; +#define ARIZONA_HPDET_B_RANGE_MAX 0x3fb + static struct { int min; int max; @@ -386,7 +394,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info) >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && - (val < 100 || val >= 0x3fb)) { + (val < arizona_hpdet_b_ranges[range].threshold || + val >= ARIZONA_HPDET_B_RANGE_MAX)) { range++; dev_dbg(arizona->dev, "Moving to HPDET range %d\n", range); @@ -399,7 +408,8 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info) } /* If we go out of range report top of range */ - if (val < 100 || val >= 0x3fb) { + if (val < arizona_hpdet_b_ranges[range].threshold || + val >= ARIZONA_HPDET_B_RANGE_MAX) { dev_dbg(arizona->dev, "Measurement out of range\n"); return ARIZONA_HPDET_MAX; } @@ -664,9 +674,8 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_update_state(info->edev, - 1 << ARIZONA_CABLE_HEADPHONE, - 1 << ARIZONA_CABLE_HEADPHONE); + ret = extcon_set_cable_state_(info->edev, + ARIZONA_CABLE_HEADPHONE, true); if (ret != 0) dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); @@ -723,9 +732,8 @@ err: ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); /* Just report headphone */ - ret = extcon_update_state(info->edev, - 1 << ARIZONA_CABLE_HEADPHONE, - 1 << ARIZONA_CABLE_HEADPHONE); + ret = extcon_set_cable_state_(info->edev, + ARIZONA_CABLE_HEADPHONE, true); if (ret != 0) dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); @@ -812,16 +820,15 @@ static void arizona_micd_detect(struct work_struct *work) if (info->detecting && (val & ARIZONA_MICD_LVL_8)) { arizona_identify_headphone(info); - ret = extcon_update_state(info->edev, - 1 << ARIZONA_CABLE_MICROPHONE, - 1 << ARIZONA_CABLE_MICROPHONE); + ret = extcon_set_cable_state_(info->edev, + ARIZONA_CABLE_MICROPHONE, true); if (ret != 0) dev_err(arizona->dev, "Headset report failed: %d\n", ret); /* Don't need to regulate for button detection */ - ret = regulator_allow_bypass(info->micvdd, false); + ret = regulator_allow_bypass(info->micvdd, true); if (ret != 0) { dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", ret); @@ -962,10 +969,16 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (arizona->pdata.jd_gpio5) { mask = ARIZONA_MICD_CLAMP_STS; - present = 0; + if (arizona->pdata.jd_invert) + present = ARIZONA_MICD_CLAMP_STS; + else + present = 0; } else { mask = ARIZONA_JD1_STS; - present = ARIZONA_JD1_STS; + if (arizona->pdata.jd_invert) + present = 0; + else + present = ARIZONA_JD1_STS; } ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); @@ -1096,6 +1109,7 @@ static int arizona_extcon_probe(struct platform_device *pdev) struct arizona_pdata *pdata = &arizona->pdata; struct arizona_extcon_info *info; unsigned int val; + unsigned int clamp_mode; int jack_irq_fall, jack_irq_rise; int ret, mode, i, j; @@ -1103,12 +1117,10 @@ static int arizona_extcon_probe(struct platform_device *pdev) return -EPROBE_DEFER; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "Failed to allocate memory\n"); + if (!info) return -ENOMEM; - } - info->micvdd = devm_regulator_get(arizona->dev, "MICVDD"); + info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD"); if (IS_ERR(info->micvdd)) { ret = PTR_ERR(info->micvdd); dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); @@ -1156,7 +1168,6 @@ static int arizona_extcon_probe(struct platform_device *pdev) return -ENOMEM; } info->edev->name = "Headset Jack"; - info->edev->dev.parent = arizona->dev; ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret < 0) { @@ -1174,7 +1185,6 @@ static int arizona_extcon_probe(struct platform_device *pdev) info->input->name = "Headset"; info->input->phys = "arizona/extcon"; - info->input->dev.parent = &pdev->dev; if (pdata->num_micd_configs) { info->micd_modes = pdata->micd_configs; @@ -1305,16 +1315,22 @@ static int arizona_extcon_probe(struct platform_device *pdev) regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, val); - regmap_update_bits(arizona->regmap, - ARIZONA_MICD_CLAMP_CONTROL, - ARIZONA_MICD_CLAMP_MODE_MASK, 0x9); + if (arizona->pdata.jd_invert) + clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H; + else + clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H; } else { - regmap_update_bits(arizona->regmap, - ARIZONA_MICD_CLAMP_CONTROL, - ARIZONA_MICD_CLAMP_MODE_MASK, 0x4); + if (arizona->pdata.jd_invert) + clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH; + else + clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL; } regmap_update_bits(arizona->regmap, + ARIZONA_MICD_CLAMP_CONTROL, + ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode); + + regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, ARIZONA_MICD_CLAMP_DB, ARIZONA_MICD_CLAMP_DB); diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c index 18d42c0e458..4c2f2c543bb 100644 --- a/drivers/extcon/extcon-class.c +++ b/drivers/extcon/extcon-class.c @@ -645,6 +645,8 @@ struct extcon_dev *devm_extcon_dev_allocate(struct device *dev, return edev; } + edev->dev.parent = dev; + *ptr = edev; devres_add(dev, ptr); diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index 645b2835681..5b7ec274cb6 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -105,7 +105,6 @@ static int gpio_extcon_probe(struct platform_device *pdev) return -ENOMEM; } extcon_data->edev->name = pdata->name; - extcon_data->edev->dev.parent = &pdev->dev; extcon_data->gpio = pdata->gpio; extcon_data->gpio_active_low = pdata->gpio_active_low; diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c index d49e891b567..7309743d0da 100644 --- a/drivers/extcon/extcon-max14577.c +++ b/drivers/extcon/extcon-max14577.c @@ -692,10 +692,9 @@ static int max14577_muic_probe(struct platform_device *pdev) u8 id; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!info) return -ENOMEM; - } + info->dev = &pdev->dev; info->max14577 = max14577; diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 2c7c3e19159..77460f2c1ca 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -255,10 +255,10 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, case ADC_DEBOUNCE_TIME_10MS: case ADC_DEBOUNCE_TIME_25MS: case ADC_DEBOUNCE_TIME_38_62MS: - ret = max77693_update_reg(info->max77693->regmap_muic, + ret = regmap_update_bits(info->max77693->regmap_muic, MAX77693_MUIC_REG_CTRL3, - time << CONTROL3_ADCDBSET_SHIFT, - CONTROL3_ADCDBSET_MASK); + CONTROL3_ADCDBSET_MASK, + time << CONTROL3_ADCDBSET_SHIFT); if (ret) { dev_err(info->dev, "failed to set ADC debounce time\n"); return ret; @@ -286,15 +286,15 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, u8 val, bool attached) { int ret = 0; - u8 ctrl1, ctrl2 = 0; + unsigned int ctrl1, ctrl2 = 0; if (attached) ctrl1 = val; else ctrl1 = CONTROL1_SW_OPEN; - ret = max77693_update_reg(info->max77693->regmap_muic, - MAX77693_MUIC_REG_CTRL1, ctrl1, COMP_SW_MASK); + ret = regmap_update_bits(info->max77693->regmap_muic, + MAX77693_MUIC_REG_CTRL1, COMP_SW_MASK, ctrl1); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); return ret; @@ -305,9 +305,9 @@ static int max77693_muic_set_path(struct max77693_muic_info *info, else ctrl2 |= CONTROL2_LOWPWR_MASK; /* LowPwr=1, CPEn=0 */ - ret = max77693_update_reg(info->max77693->regmap_muic, - MAX77693_MUIC_REG_CTRL2, ctrl2, - CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK); + ret = regmap_update_bits(info->max77693->regmap_muic, + MAX77693_MUIC_REG_CTRL2, + CONTROL2_LOWPWR_MASK | CONTROL2_CPEN_MASK, ctrl2); if (ret < 0) { dev_err(info->dev, "failed to update MUIC register\n"); return ret; @@ -969,8 +969,8 @@ static void max77693_muic_irq_work(struct work_struct *work) if (info->irq == muic_irqs[i].virq) irq_type = muic_irqs[i].irq; - ret = max77693_bulk_read(info->max77693->regmap_muic, - MAX77693_MUIC_REG_STATUS1, 2, info->status); + ret = regmap_bulk_read(info->max77693->regmap_muic, + MAX77693_MUIC_REG_STATUS1, info->status, 2); if (ret) { dev_err(info->dev, "failed to read MUIC register\n"); mutex_unlock(&info->mutex); @@ -1042,8 +1042,8 @@ static int max77693_muic_detect_accessory(struct max77693_muic_info *info) mutex_lock(&info->mutex); /* Read STATUSx register to detect accessory */ - ret = max77693_bulk_read(info->max77693->regmap_muic, - MAX77693_MUIC_REG_STATUS1, 2, info->status); + ret = regmap_bulk_read(info->max77693->regmap_muic, + MAX77693_MUIC_REG_STATUS1, info->status, 2); if (ret) { dev_err(info->dev, "failed to read MUIC register\n"); mutex_unlock(&info->mutex); @@ -1095,14 +1095,13 @@ static int max77693_muic_probe(struct platform_device *pdev) int delay_jiffies; int ret; int i; - u8 id; + unsigned int id; info = devm_kzalloc(&pdev->dev, sizeof(struct max77693_muic_info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!info) return -ENOMEM; - } + info->dev = &pdev->dev; info->max77693 = max77693; if (info->max77693->regmap_muic) { @@ -1154,7 +1153,8 @@ static int max77693_muic_probe(struct platform_device *pdev) struct max77693_muic_irq *muic_irq = &muic_irqs[i]; unsigned int virq = 0; - virq = irq_create_mapping(max77693->irq_domain, muic_irq->irq); + virq = regmap_irq_get_virq(max77693->irq_data_muic, + muic_irq->irq); if (!virq) { ret = -EINVAL; goto err_irq; @@ -1183,7 +1183,6 @@ static int max77693_muic_probe(struct platform_device *pdev) goto err_irq; } info->edev->name = DEV_NAME; - info->edev->dev.parent = &pdev->dev; ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret) { @@ -1204,7 +1203,7 @@ static int max77693_muic_probe(struct platform_device *pdev) enum max77693_irq_source irq_src = MAX77693_IRQ_GROUP_NR; - max77693_write_reg(info->max77693->regmap_muic, + regmap_write(info->max77693->regmap_muic, init_data[i].addr, init_data[i].data); @@ -1262,7 +1261,7 @@ static int max77693_muic_probe(struct platform_device *pdev) max77693_muic_set_path(info, info->path_uart, true); /* Check revision number of MUIC device*/ - ret = max77693_read_reg(info->max77693->regmap_muic, + ret = regmap_read(info->max77693->regmap_muic, MAX77693_MUIC_REG_ID, &id); if (ret < 0) { dev_err(&pdev->dev, "failed to read revision number\n"); diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index d9f7f1baaa0..75e501c9800 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -661,10 +661,8 @@ static int max8997_muic_probe(struct platform_device *pdev) info = devm_kzalloc(&pdev->dev, sizeof(struct max8997_muic_info), GFP_KERNEL); - if (!info) { - dev_err(&pdev->dev, "failed to allocate memory\n"); + if (!info) return -ENOMEM; - } info->dev = &pdev->dev; info->muic = max8997->muic; @@ -706,7 +704,6 @@ static int max8997_muic_probe(struct platform_device *pdev) goto err_irq; } info->edev->name = DEV_NAME; - info->edev->dev.parent = &pdev->dev; ret = devm_extcon_dev_register(&pdev->dev, info->edev); if (ret) { diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c index 7417ce84eb2..230e1220ce4 100644 --- a/drivers/extcon/extcon-palmas.c +++ b/drivers/extcon/extcon-palmas.c @@ -194,7 +194,6 @@ static int palmas_usb_probe(struct platform_device *pdev) return -ENOMEM; } palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL); - palmas_usb->edev->dev.parent = palmas_usb->dev; palmas_usb->edev->mutually_exclusive = mutually_exclusive; status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev); @@ -278,7 +277,7 @@ static int palmas_usb_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(palmas_pm_ops, palmas_usb_suspend, palmas_usb_resume); -static struct of_device_id of_palmas_match_tbl[] = { +static const struct of_device_id of_palmas_match_tbl[] = { { .compatible = "ti,palmas-usb", }, { .compatible = "ti,palmas-usb-vid", }, { .compatible = "ti,twl6035-usb", }, diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c new file mode 100644 index 00000000000..560d7dccec7 --- /dev/null +++ b/drivers/extcon/extcon-sm5502.c @@ -0,0 +1,724 @@ +/* + * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * Author: Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/extcon.h> +#include <linux/extcon/sm5502.h> + +#define DELAY_MS_DEFAULT 17000 /* unit: millisecond */ + +struct muic_irq { + unsigned int irq; + const char *name; + unsigned int virq; +}; + +struct reg_data { + u8 reg; + unsigned int val; + bool invert; +}; + +struct sm5502_muic_info { + struct device *dev; + struct extcon_dev *edev; + + struct i2c_client *i2c; + struct regmap *regmap; + + struct regmap_irq_chip_data *irq_data; + struct muic_irq *muic_irqs; + unsigned int num_muic_irqs; + int irq; + bool irq_attach; + bool irq_detach; + struct work_struct irq_work; + + struct reg_data *reg_data; + unsigned int num_reg_data; + + struct mutex mutex; + + /* + * Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + struct delayed_work wq_detcable; +}; + +/* Default value of SM5502 register to bring up MUIC device. */ +static struct reg_data sm5502_reg_data[] = { + { + .reg = SM5502_REG_CONTROL, + .val = SM5502_REG_CONTROL_MASK_INT_MASK, + .invert = false, + }, { + .reg = SM5502_REG_INTMASK1, + .val = SM5502_REG_INTM1_KP_MASK + | SM5502_REG_INTM1_LKP_MASK + | SM5502_REG_INTM1_LKR_MASK, + .invert = true, + }, { + .reg = SM5502_REG_INTMASK2, + .val = SM5502_REG_INTM2_VBUS_DET_MASK + | SM5502_REG_INTM2_REV_ACCE_MASK + | SM5502_REG_INTM2_ADC_CHG_MASK + | SM5502_REG_INTM2_STUCK_KEY_MASK + | SM5502_REG_INTM2_STUCK_KEY_RCV_MASK + | SM5502_REG_INTM2_MHL_MASK, + .invert = true, + }, + { } +}; + +/* List of detectable cables */ +enum { + EXTCON_CABLE_USB = 0, + EXTCON_CABLE_USB_HOST, + EXTCON_CABLE_TA, + + EXTCON_CABLE_END, +}; + +static const char *sm5502_extcon_cable[] = { + [EXTCON_CABLE_USB] = "USB", + [EXTCON_CABLE_USB_HOST] = "USB-Host", + [EXTCON_CABLE_TA] = "TA", + NULL, +}; + +/* Define supported accessory type */ +enum sm5502_muic_acc_type { + SM5502_MUIC_ADC_GROUND = 0x0, + SM5502_MUIC_ADC_SEND_END_BUTTON, + SM5502_MUIC_ADC_REMOTE_S1_BUTTON, + SM5502_MUIC_ADC_REMOTE_S2_BUTTON, + SM5502_MUIC_ADC_REMOTE_S3_BUTTON, + SM5502_MUIC_ADC_REMOTE_S4_BUTTON, + SM5502_MUIC_ADC_REMOTE_S5_BUTTON, + SM5502_MUIC_ADC_REMOTE_S6_BUTTON, + SM5502_MUIC_ADC_REMOTE_S7_BUTTON, + SM5502_MUIC_ADC_REMOTE_S8_BUTTON, + SM5502_MUIC_ADC_REMOTE_S9_BUTTON, + SM5502_MUIC_ADC_REMOTE_S10_BUTTON, + SM5502_MUIC_ADC_REMOTE_S11_BUTTON, + SM5502_MUIC_ADC_REMOTE_S12_BUTTON, + SM5502_MUIC_ADC_RESERVED_ACC_1, + SM5502_MUIC_ADC_RESERVED_ACC_2, + SM5502_MUIC_ADC_RESERVED_ACC_3, + SM5502_MUIC_ADC_RESERVED_ACC_4, + SM5502_MUIC_ADC_RESERVED_ACC_5, + SM5502_MUIC_ADC_AUDIO_TYPE2, + SM5502_MUIC_ADC_PHONE_POWERED_DEV, + SM5502_MUIC_ADC_TTY_CONVERTER, + SM5502_MUIC_ADC_UART_CABLE, + SM5502_MUIC_ADC_TYPE1_CHARGER, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB, + SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE, + SM5502_MUIC_ADC_TYPE2_CHARGER, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART, + SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART, + SM5502_MUIC_ADC_AUDIO_TYPE1, + SM5502_MUIC_ADC_OPEN = 0x1f, + + /* The below accessories have same ADC value (0x1f or 0x1e). + So, Device type1 is used to separate specific accessory. */ + /* |---------|--ADC| */ + /* | [7:5]|[4:0]| */ + SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e, /* | 001|11110| */ + SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e, /* | 010|11110| */ + /* |Dev Type1|--ADC| */ + SM5502_MUIC_ADC_OPEN_USB = 0x5f, /* | 010|11111| */ + SM5502_MUIC_ADC_OPEN_TA = 0xdf, /* | 110|11111| */ + SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff, /* | 111|11111| */ +}; + +/* List of supported interrupt for SM5502 */ +static struct muic_irq sm5502_muic_irqs[] = { + { SM5502_IRQ_INT1_ATTACH, "muic-attach" }, + { SM5502_IRQ_INT1_DETACH, "muic-detach" }, + { SM5502_IRQ_INT1_KP, "muic-kp" }, + { SM5502_IRQ_INT1_LKP, "muic-lkp" }, + { SM5502_IRQ_INT1_LKR, "muic-lkr" }, + { SM5502_IRQ_INT1_OVP_EVENT, "muic-ovp-event" }, + { SM5502_IRQ_INT1_OCP_EVENT, "muic-ocp-event" }, + { SM5502_IRQ_INT1_OVP_OCP_DIS, "muic-ovp-ocp-dis" }, + { SM5502_IRQ_INT2_VBUS_DET, "muic-vbus-det" }, + { SM5502_IRQ_INT2_REV_ACCE, "muic-rev-acce" }, + { SM5502_IRQ_INT2_ADC_CHG, "muic-adc-chg" }, + { SM5502_IRQ_INT2_STUCK_KEY, "muic-stuck-key" }, + { SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" }, + { SM5502_IRQ_INT2_MHL, "muic-mhl" }, +}; + +/* Define interrupt list of SM5502 to register regmap_irq */ +static const struct regmap_irq sm5502_irqs[] = { + /* INT1 interrupts */ + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, }, + { .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, }, + + /* INT2 interrupts */ + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,}, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, }, + { .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, }, +}; + +static const struct regmap_irq_chip sm5502_muic_irq_chip = { + .name = "sm5502", + .status_base = SM5502_REG_INT1, + .mask_base = SM5502_REG_INTMASK1, + .mask_invert = false, + .num_regs = 2, + .irqs = sm5502_irqs, + .num_irqs = ARRAY_SIZE(sm5502_irqs), +}; + +/* Define regmap configuration of SM5502 for I2C communication */ +static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SM5502_REG_INTMASK1: + case SM5502_REG_INTMASK2: + return true; + default: + break; + } + return false; +} + +static const struct regmap_config sm5502_muic_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = sm5502_muic_volatile_reg, + .max_register = SM5502_REG_END, +}; + +/* Change DM_CON/DP_CON/VBUSIN switch according to cable type */ +static int sm5502_muic_set_path(struct sm5502_muic_info *info, + unsigned int con_sw, unsigned int vbus_sw, + bool attached) +{ + int ret; + + if (!attached) { + con_sw = DM_DP_SWITCH_OPEN; + vbus_sw = VBUSIN_SWITCH_OPEN; + } + + switch (con_sw) { + case DM_DP_SWITCH_OPEN: + case DM_DP_SWITCH_USB: + case DM_DP_SWITCH_AUDIO: + case DM_DP_SWITCH_UART: + ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW1_DP_MASK | + SM5502_REG_MANUAL_SW1_DM_MASK, + con_sw); + if (ret < 0) { + dev_err(info->dev, + "cannot update DM_CON/DP_CON switch\n"); + return ret; + } + break; + default: + dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n", + con_sw); + return -EINVAL; + }; + + switch (vbus_sw) { + case VBUSIN_SWITCH_OPEN: + case VBUSIN_SWITCH_VBUSOUT: + case VBUSIN_SWITCH_MIC: + case VBUSIN_SWITCH_VBUSOUT_WITH_USB: + ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW1_VBUSIN_MASK, + vbus_sw); + if (ret < 0) { + dev_err(info->dev, + "cannot update VBUSIN switch\n"); + return ret; + } + break; + default: + dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw); + return -EINVAL; + }; + + return 0; +} + +/* Return cable type of attached or detached accessories */ +static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info) +{ + unsigned int cable_type = -1, adc, dev_type1; + int ret; + + /* Read ADC value according to external cable or button */ + ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc); + if (ret) { + dev_err(info->dev, "failed to read ADC register\n"); + return ret; + } + + /* + * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't + * connected with to MUIC device. + */ + cable_type &= SM5502_REG_ADC_MASK; + if (cable_type == SM5502_MUIC_ADC_GROUND) + return SM5502_MUIC_ADC_GROUND; + + switch (cable_type) { + case SM5502_MUIC_ADC_GROUND: + case SM5502_MUIC_ADC_SEND_END_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S1_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S2_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S3_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S4_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S5_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S6_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S7_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S8_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S9_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S10_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S11_BUTTON: + case SM5502_MUIC_ADC_REMOTE_S12_BUTTON: + case SM5502_MUIC_ADC_RESERVED_ACC_1: + case SM5502_MUIC_ADC_RESERVED_ACC_2: + case SM5502_MUIC_ADC_RESERVED_ACC_3: + case SM5502_MUIC_ADC_RESERVED_ACC_4: + case SM5502_MUIC_ADC_RESERVED_ACC_5: + case SM5502_MUIC_ADC_AUDIO_TYPE2: + case SM5502_MUIC_ADC_PHONE_POWERED_DEV: + case SM5502_MUIC_ADC_TTY_CONVERTER: + case SM5502_MUIC_ADC_UART_CABLE: + case SM5502_MUIC_ADC_TYPE1_CHARGER: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB: + case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE: + case SM5502_MUIC_ADC_TYPE2_CHARGER: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART: + case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART: + break; + case SM5502_MUIC_ADC_AUDIO_TYPE1: + /* + * Check whether cable type is + * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE + * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END + * by using Button event. + */ + break; + case SM5502_MUIC_ADC_OPEN: + ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1, + &dev_type1); + if (ret) { + dev_err(info->dev, "failed to read DEV_TYPE1 reg\n"); + return ret; + } + + switch (dev_type1) { + case SM5502_REG_DEV_TYPE1_USB_SDP_MASK: + cable_type = SM5502_MUIC_ADC_OPEN_USB; + break; + case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK: + cable_type = SM5502_MUIC_ADC_OPEN_TA; + break; + case SM5502_REG_DEV_TYPE1_USB_OTG_MASK: + cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG; + break; + default: + dev_dbg(info->dev, + "cannot identify the cable type: adc(0x%x) " + "dev_type1(0x%x)\n", adc, dev_type1); + return -EINVAL; + }; + break; + default: + dev_err(info->dev, + "failed to identify the cable type: adc(0x%x)\n", adc); + return -EINVAL; + }; + + return cable_type; +} + +static int sm5502_muic_cable_handler(struct sm5502_muic_info *info, + bool attached) +{ + static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND; + const char **cable_names = info->edev->supported_cable; + unsigned int cable_type = SM5502_MUIC_ADC_GROUND; + unsigned int con_sw = DM_DP_SWITCH_OPEN; + unsigned int vbus_sw = VBUSIN_SWITCH_OPEN; + unsigned int idx = 0; + int ret; + + if (!cable_names) + return 0; + + /* Get the type of attached or detached cable */ + if (attached) + cable_type = sm5502_muic_get_cable_type(info); + else if (!attached) + cable_type = prev_cable_type; + prev_cable_type = cable_type; + + switch (cable_type) { + case SM5502_MUIC_ADC_OPEN_USB: + idx = EXTCON_CABLE_USB; + con_sw = DM_DP_SWITCH_USB; + vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB; + break; + case SM5502_MUIC_ADC_OPEN_TA: + idx = EXTCON_CABLE_TA; + con_sw = DM_DP_SWITCH_OPEN; + vbus_sw = VBUSIN_SWITCH_VBUSOUT; + break; + case SM5502_MUIC_ADC_OPEN_USB_OTG: + idx = EXTCON_CABLE_USB_HOST; + con_sw = DM_DP_SWITCH_USB; + vbus_sw = VBUSIN_SWITCH_OPEN; + break; + default: + dev_dbg(info->dev, + "cannot handle this cable_type (0x%x)\n", cable_type); + return 0; + }; + + /* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */ + ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached); + if (ret < 0) + return ret; + + /* Change the state of external accessory */ + extcon_set_cable_state(info->edev, cable_names[idx], attached); + + return 0; +} + +static void sm5502_muic_irq_work(struct work_struct *work) +{ + struct sm5502_muic_info *info = container_of(work, + struct sm5502_muic_info, irq_work); + int ret = 0; + + if (!info->edev) + return; + + mutex_lock(&info->mutex); + + /* Detect attached or detached cables */ + if (info->irq_attach) { + ret = sm5502_muic_cable_handler(info, true); + info->irq_attach = false; + } + if (info->irq_detach) { + ret = sm5502_muic_cable_handler(info, false); + info->irq_detach = false; + } + + if (ret < 0) + dev_err(info->dev, "failed to handle MUIC interrupt\n"); + + mutex_unlock(&info->mutex); + + return; +} + +/* + * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0. + * Returns -ESRCH if irq_type does not match registered IRQ for this dev type. + */ +static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type) +{ + switch (irq_type) { + case SM5502_IRQ_INT1_ATTACH: + info->irq_attach = true; + break; + case SM5502_IRQ_INT1_DETACH: + info->irq_detach = true; + break; + case SM5502_IRQ_INT1_KP: + case SM5502_IRQ_INT1_LKP: + case SM5502_IRQ_INT1_LKR: + case SM5502_IRQ_INT1_OVP_EVENT: + case SM5502_IRQ_INT1_OCP_EVENT: + case SM5502_IRQ_INT1_OVP_OCP_DIS: + case SM5502_IRQ_INT2_VBUS_DET: + case SM5502_IRQ_INT2_REV_ACCE: + case SM5502_IRQ_INT2_ADC_CHG: + case SM5502_IRQ_INT2_STUCK_KEY: + case SM5502_IRQ_INT2_STUCK_KEY_RCV: + case SM5502_IRQ_INT2_MHL: + default: + break; + } + + return 0; +} + +static irqreturn_t sm5502_muic_irq_handler(int irq, void *data) +{ + struct sm5502_muic_info *info = data; + int i, irq_type = -1, ret; + + for (i = 0; i < info->num_muic_irqs; i++) + if (irq == info->muic_irqs[i].virq) + irq_type = info->muic_irqs[i].irq; + + ret = sm5502_parse_irq(info, irq_type); + if (ret < 0) { + dev_warn(info->dev, "cannot handle is interrupt:%d\n", + irq_type); + return IRQ_HANDLED; + } + schedule_work(&info->irq_work); + + return IRQ_HANDLED; +} + +static void sm5502_muic_detect_cable_wq(struct work_struct *work) +{ + struct sm5502_muic_info *info = container_of(to_delayed_work(work), + struct sm5502_muic_info, wq_detcable); + int ret; + + /* Notify the state of connector cable or not */ + ret = sm5502_muic_cable_handler(info, true); + if (ret < 0) + dev_warn(info->dev, "failed to detect cable state\n"); +} + +static void sm5502_init_dev_type(struct sm5502_muic_info *info) +{ + unsigned int reg_data, vendor_id, version_id; + int i, ret; + + /* To test I2C, Print version_id and vendor_id of SM5502 */ + ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, ®_data); + if (ret) { + dev_err(info->dev, + "failed to read DEVICE_ID register: %d\n", ret); + return; + } + + vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >> + SM5502_REG_DEVICE_ID_VENDOR_SHIFT); + version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >> + SM5502_REG_DEVICE_ID_VERSION_SHIFT); + + dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n", + version_id, vendor_id); + + /* Initiazle the register of SM5502 device to bring-up */ + for (i = 0; i < info->num_reg_data; i++) { + unsigned int val = 0; + + if (!info->reg_data[i].invert) + val |= ~info->reg_data[i].val; + else + val = info->reg_data[i].val; + regmap_write(info->regmap, info->reg_data[i].reg, val); + } +} + +static int sm5022_muic_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct sm5502_muic_info *info; + int i, ret, irq_flags; + + if (!np) + return -EINVAL; + + info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + i2c_set_clientdata(i2c, info); + + info->dev = &i2c->dev; + info->i2c = i2c; + info->irq = i2c->irq; + info->muic_irqs = sm5502_muic_irqs; + info->num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs); + info->reg_data = sm5502_reg_data; + info->num_reg_data = ARRAY_SIZE(sm5502_reg_data); + + mutex_init(&info->mutex); + + INIT_WORK(&info->irq_work, sm5502_muic_irq_work); + + info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config); + if (IS_ERR(info->regmap)) { + ret = PTR_ERR(info->regmap); + dev_err(info->dev, "failed to allocate register map: %d\n", + ret); + return ret; + } + + /* Support irq domain for SM5502 MUIC device */ + irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED; + ret = regmap_add_irq_chip(info->regmap, info->irq, irq_flags, 0, + &sm5502_muic_irq_chip, &info->irq_data); + if (ret != 0) { + dev_err(info->dev, "failed to request IRQ %d: %d\n", + info->irq, ret); + return ret; + } + + for (i = 0; i < info->num_muic_irqs; i++) { + struct muic_irq *muic_irq = &info->muic_irqs[i]; + unsigned int virq = 0; + + virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq); + if (virq <= 0) + return -EINVAL; + muic_irq->virq = virq; + + ret = devm_request_threaded_irq(info->dev, virq, NULL, + sm5502_muic_irq_handler, + IRQF_NO_SUSPEND, + muic_irq->name, info); + if (ret) { + dev_err(info->dev, "failed: irq request (IRQ: %d," + " error :%d)\n", muic_irq->irq, ret); + return ret; + } + } + + /* Allocate extcon device */ + info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(info->dev, "failed to allocate memory for extcon\n"); + return -ENOMEM; + } + info->edev->name = np->name; + + /* Register extcon device */ + ret = devm_extcon_dev_register(info->dev, info->edev); + if (ret) { + dev_err(info->dev, "failed to register extcon device\n"); + return ret; + } + + /* + * Detect accessory after completing the initialization of platform + * + * - Use delayed workqueue to detect cable state and then + * notify cable state to notifiee/platform through uevent. + * After completing the booting of platform, the extcon provider + * driver should notify cable state to upper layer. + */ + INIT_DELAYED_WORK(&info->wq_detcable, sm5502_muic_detect_cable_wq); + queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, + msecs_to_jiffies(DELAY_MS_DEFAULT)); + + /* Initialize SM5502 device and print vendor id and version id */ + sm5502_init_dev_type(info); + + return 0; +} + +static int sm5502_muic_i2c_remove(struct i2c_client *i2c) +{ + struct sm5502_muic_info *info = i2c_get_clientdata(i2c); + + regmap_del_irq_chip(info->irq, info->irq_data); + + return 0; +} + +static struct of_device_id sm5502_dt_match[] = { + { .compatible = "siliconmitus,sm5502-muic" }, + { }, +}; + +#ifdef CONFIG_PM_SLEEP +static int sm5502_muic_suspend(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sm5502_muic_info *info = i2c_get_clientdata(i2c); + + enable_irq_wake(info->irq); + + return 0; +} + +static int sm5502_muic_resume(struct device *dev) +{ + struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); + struct sm5502_muic_info *info = i2c_get_clientdata(i2c); + + disable_irq_wake(info->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops, + sm5502_muic_suspend, sm5502_muic_resume); + +static const struct i2c_device_id sm5502_i2c_id[] = { + { "sm5502", TYPE_SM5502 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id); + +static struct i2c_driver sm5502_muic_i2c_driver = { + .driver = { + .name = "sm5502", + .owner = THIS_MODULE, + .pm = &sm5502_muic_pm_ops, + .of_match_table = sm5502_dt_match, + }, + .probe = sm5022_muic_i2c_probe, + .remove = sm5502_muic_i2c_remove, + .id_table = sm5502_i2c_id, +}; + +static int __init sm5502_muic_i2c_init(void) +{ + return i2c_add_driver(&sm5502_muic_i2c_driver); +} +subsys_initcall(sm5502_muic_i2c_init); + +MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver"); +MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 6cc4b6acc22..fb824f50119 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -384,6 +384,7 @@ config MFD_MAX77693 depends on I2C=y select MFD_CORE select REGMAP_I2C + select REGMAP_IRQ help Say yes here to add support for Maxim Semiconductor MAX77693. This is a companion Power Management IC with Flash, Haptic, Charger, diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8afedba535c..8c6e7bba466 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -116,7 +116,7 @@ obj-$(CONFIG_MFD_DA9063) += da9063.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77686) += max77686.o max77686-irq.o -obj-$(CONFIG_MFD_MAX77693) += max77693.o max77693-irq.o +obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX8907) += max8907.o max8925-objs := max8925-core.o max8925-i2c.o obj-$(CONFIG_MFD_MAX8925) += max8925.o diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c deleted file mode 100644 index 66b58fe7709..00000000000 --- a/drivers/mfd/max77693-irq.c +++ /dev/null @@ -1,336 +0,0 @@ -/* - * max77693-irq.c - Interrupt controller support for MAX77693 - * - * Copyright (C) 2012 Samsung Electronics Co.Ltd - * SangYoung Son <hello.son@samsung.com> - * - * This program is not provided / owned by Maxim Integrated Products. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This driver is based on max8997-irq.c - */ - -#include <linux/err.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/irqdomain.h> -#include <linux/mfd/max77693.h> -#include <linux/mfd/max77693-private.h> - -static const u8 max77693_mask_reg[] = { - [LED_INT] = MAX77693_LED_REG_FLASH_INT_MASK, - [TOPSYS_INT] = MAX77693_PMIC_REG_TOPSYS_INT_MASK, - [CHG_INT] = MAX77693_CHG_REG_CHG_INT_MASK, - [MUIC_INT1] = MAX77693_MUIC_REG_INTMASK1, - [MUIC_INT2] = MAX77693_MUIC_REG_INTMASK2, - [MUIC_INT3] = MAX77693_MUIC_REG_INTMASK3, -}; - -static struct regmap *max77693_get_regmap(struct max77693_dev *max77693, - enum max77693_irq_source src) -{ - switch (src) { - case LED_INT ... CHG_INT: - return max77693->regmap; - case MUIC_INT1 ... MUIC_INT3: - return max77693->regmap_muic; - default: - return ERR_PTR(-EINVAL); - } -} - -struct max77693_irq_data { - int mask; - enum max77693_irq_source group; -}; - -#define DECLARE_IRQ(idx, _group, _mask) \ - [(idx)] = { .group = (_group), .mask = (_mask) } -static const struct max77693_irq_data max77693_irqs[] = { - DECLARE_IRQ(MAX77693_LED_IRQ_FLED2_OPEN, LED_INT, 1 << 0), - DECLARE_IRQ(MAX77693_LED_IRQ_FLED2_SHORT, LED_INT, 1 << 1), - DECLARE_IRQ(MAX77693_LED_IRQ_FLED1_OPEN, LED_INT, 1 << 2), - DECLARE_IRQ(MAX77693_LED_IRQ_FLED1_SHORT, LED_INT, 1 << 3), - DECLARE_IRQ(MAX77693_LED_IRQ_MAX_FLASH, LED_INT, 1 << 4), - - DECLARE_IRQ(MAX77693_TOPSYS_IRQ_T120C_INT, TOPSYS_INT, 1 << 0), - DECLARE_IRQ(MAX77693_TOPSYS_IRQ_T140C_INT, TOPSYS_INT, 1 << 1), - DECLARE_IRQ(MAX77693_TOPSYS_IRQ_LOWSYS_INT, TOPSYS_INT, 1 << 3), - - DECLARE_IRQ(MAX77693_CHG_IRQ_BYP_I, CHG_INT, 1 << 0), - DECLARE_IRQ(MAX77693_CHG_IRQ_THM_I, CHG_INT, 1 << 2), - DECLARE_IRQ(MAX77693_CHG_IRQ_BAT_I, CHG_INT, 1 << 3), - DECLARE_IRQ(MAX77693_CHG_IRQ_CHG_I, CHG_INT, 1 << 4), - DECLARE_IRQ(MAX77693_CHG_IRQ_CHGIN_I, CHG_INT, 1 << 6), - - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC, MUIC_INT1, 1 << 0), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC_LOW, MUIC_INT1, 1 << 1), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC_ERR, MUIC_INT1, 1 << 2), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT1_ADC1K, MUIC_INT1, 1 << 3), - - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_CHGTYP, MUIC_INT2, 1 << 0), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_CHGDETREUN, MUIC_INT2, 1 << 1), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_DCDTMR, MUIC_INT2, 1 << 2), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_DXOVP, MUIC_INT2, 1 << 3), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_VBVOLT, MUIC_INT2, 1 << 4), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT2_VIDRM, MUIC_INT2, 1 << 5), - - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_EOC, MUIC_INT3, 1 << 0), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_CGMBC, MUIC_INT3, 1 << 1), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_OVP, MUIC_INT3, 1 << 2), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_MBCCHG_ERR, MUIC_INT3, 1 << 3), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, MUIC_INT3, 1 << 4), - DECLARE_IRQ(MAX77693_MUIC_IRQ_INT3_BAT_DET, MUIC_INT3, 1 << 5), -}; - -static void max77693_irq_lock(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - - mutex_lock(&max77693->irqlock); -} - -static void max77693_irq_sync_unlock(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - int i; - - for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { - u8 mask_reg = max77693_mask_reg[i]; - struct regmap *map = max77693_get_regmap(max77693, i); - - if (mask_reg == MAX77693_REG_INVALID || - IS_ERR_OR_NULL(map)) - continue; - max77693->irq_masks_cache[i] = max77693->irq_masks_cur[i]; - - max77693_write_reg(map, max77693_mask_reg[i], - max77693->irq_masks_cur[i]); - } - - mutex_unlock(&max77693->irqlock); -} - -static const inline struct max77693_irq_data * -irq_to_max77693_irq(struct max77693_dev *max77693, int irq) -{ - struct irq_data *data = irq_get_irq_data(irq); - return &max77693_irqs[data->hwirq]; -} - -static void max77693_irq_mask(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - const struct max77693_irq_data *irq_data = - irq_to_max77693_irq(max77693, data->irq); - - if (irq_data->group >= MAX77693_IRQ_GROUP_NR) - return; - - if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) - max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; - else - max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; -} - -static void max77693_irq_unmask(struct irq_data *data) -{ - struct max77693_dev *max77693 = irq_get_chip_data(data->irq); - const struct max77693_irq_data *irq_data = - irq_to_max77693_irq(max77693, data->irq); - - if (irq_data->group >= MAX77693_IRQ_GROUP_NR) - return; - - if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) - max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; - else - max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; -} - -static struct irq_chip max77693_irq_chip = { - .name = "max77693", - .irq_bus_lock = max77693_irq_lock, - .irq_bus_sync_unlock = max77693_irq_sync_unlock, - .irq_mask = max77693_irq_mask, - .irq_unmask = max77693_irq_unmask, -}; - -#define MAX77693_IRQSRC_CHG (1 << 0) -#define MAX77693_IRQSRC_TOP (1 << 1) -#define MAX77693_IRQSRC_FLASH (1 << 2) -#define MAX77693_IRQSRC_MUIC (1 << 3) -static irqreturn_t max77693_irq_thread(int irq, void *data) -{ - struct max77693_dev *max77693 = data; - u8 irq_reg[MAX77693_IRQ_GROUP_NR] = {}; - u8 irq_src; - int ret; - int i, cur_irq; - - ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_INTSRC, - &irq_src); - if (ret < 0) { - dev_err(max77693->dev, "Failed to read interrupt source: %d\n", - ret); - return IRQ_NONE; - } - - if (irq_src & MAX77693_IRQSRC_CHG) - /* CHG_INT */ - ret = max77693_read_reg(max77693->regmap, MAX77693_CHG_REG_CHG_INT, - &irq_reg[CHG_INT]); - - if (irq_src & MAX77693_IRQSRC_TOP) - /* TOPSYS_INT */ - ret = max77693_read_reg(max77693->regmap, - MAX77693_PMIC_REG_TOPSYS_INT, &irq_reg[TOPSYS_INT]); - - if (irq_src & MAX77693_IRQSRC_FLASH) - /* LED_INT */ - ret = max77693_read_reg(max77693->regmap, - MAX77693_LED_REG_FLASH_INT, &irq_reg[LED_INT]); - - if (irq_src & MAX77693_IRQSRC_MUIC) - /* MUIC INT1 ~ INT3 */ - max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, - MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]); - - /* Apply masking */ - for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { - if (i >= MUIC_INT1 && i <= MUIC_INT3) - irq_reg[i] &= max77693->irq_masks_cur[i]; - else - irq_reg[i] &= ~max77693->irq_masks_cur[i]; - } - - /* Report */ - for (i = 0; i < MAX77693_IRQ_NR; i++) { - if (irq_reg[max77693_irqs[i].group] & max77693_irqs[i].mask) { - cur_irq = irq_find_mapping(max77693->irq_domain, i); - if (cur_irq) - handle_nested_irq(cur_irq); - } - } - - return IRQ_HANDLED; -} - -int max77693_irq_resume(struct max77693_dev *max77693) -{ - if (max77693->irq) - max77693_irq_thread(0, max77693); - - return 0; -} - -static int max77693_irq_domain_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - struct max77693_dev *max77693 = d->host_data; - - irq_set_chip_data(irq, max77693); - irq_set_chip_and_handler(irq, &max77693_irq_chip, handle_edge_irq); - irq_set_nested_thread(irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - irq_set_noprobe(irq); -#endif - return 0; -} - -static struct irq_domain_ops max77693_irq_domain_ops = { - .map = max77693_irq_domain_map, -}; - -int max77693_irq_init(struct max77693_dev *max77693) -{ - struct irq_domain *domain; - int i; - int ret = 0; - u8 intsrc_mask; - - mutex_init(&max77693->irqlock); - - /* Mask individual interrupt sources */ - for (i = 0; i < MAX77693_IRQ_GROUP_NR; i++) { - struct regmap *map; - /* MUIC IRQ 0:MASK 1:NOT MASK */ - /* Other IRQ 1:MASK 0:NOT MASK */ - if (i >= MUIC_INT1 && i <= MUIC_INT3) { - max77693->irq_masks_cur[i] = 0x00; - max77693->irq_masks_cache[i] = 0x00; - } else { - max77693->irq_masks_cur[i] = 0xff; - max77693->irq_masks_cache[i] = 0xff; - } - map = max77693_get_regmap(max77693, i); - - if (IS_ERR_OR_NULL(map)) - continue; - if (max77693_mask_reg[i] == MAX77693_REG_INVALID) - continue; - if (i >= MUIC_INT1 && i <= MUIC_INT3) - max77693_write_reg(map, max77693_mask_reg[i], 0x00); - else - max77693_write_reg(map, max77693_mask_reg[i], 0xff); - } - - domain = irq_domain_add_linear(NULL, MAX77693_IRQ_NR, - &max77693_irq_domain_ops, max77693); - if (!domain) { - dev_err(max77693->dev, "could not create irq domain\n"); - ret = -ENODEV; - goto err_irq; - } - max77693->irq_domain = domain; - - /* Unmask max77693 interrupt */ - ret = max77693_read_reg(max77693->regmap, - MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask); - if (ret < 0) { - dev_err(max77693->dev, "fail to read PMIC register\n"); - goto err_irq; - } - - intsrc_mask &= ~(MAX77693_IRQSRC_CHG); - intsrc_mask &= ~(MAX77693_IRQSRC_FLASH); - intsrc_mask &= ~(MAX77693_IRQSRC_MUIC); - ret = max77693_write_reg(max77693->regmap, - MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask); - if (ret < 0) { - dev_err(max77693->dev, "fail to write PMIC register\n"); - goto err_irq; - } - - ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "max77693-irq", max77693); - if (ret) - dev_err(max77693->dev, "Failed to request IRQ %d: %d\n", - max77693->irq, ret); - -err_irq: - return ret; -} - -void max77693_irq_exit(struct max77693_dev *max77693) -{ - if (max77693->irq) - free_irq(max77693->irq, max77693); -} diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 7e05428c756..249c139ef04 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -49,62 +49,62 @@ static const struct mfd_cell max77693_devs[] = { { .name = "max77693-haptic", }, }; -int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest) -{ - unsigned int val; - int ret; - - ret = regmap_read(map, reg, &val); - *dest = val; - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_read_reg); - -int max77693_bulk_read(struct regmap *map, u8 reg, int count, u8 *buf) -{ - int ret; - - ret = regmap_bulk_read(map, reg, buf, count); - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_bulk_read); - -int max77693_write_reg(struct regmap *map, u8 reg, u8 value) -{ - int ret; - - ret = regmap_write(map, reg, value); - - return ret; -} -EXPORT_SYMBOL_GPL(max77693_write_reg); - -int max77693_bulk_write(struct regmap *map, u8 reg, int count, u8 *buf) -{ - int ret; +static const struct regmap_config max77693_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77693_PMIC_REG_END, +}; - ret = regmap_bulk_write(map, reg, buf, count); +static const struct regmap_irq max77693_led_irqs[] = { + { .mask = LED_IRQ_FLED2_OPEN, }, + { .mask = LED_IRQ_FLED2_SHORT, }, + { .mask = LED_IRQ_FLED1_OPEN, }, + { .mask = LED_IRQ_FLED1_SHORT, }, + { .mask = LED_IRQ_MAX_FLASH, }, +}; - return ret; -} -EXPORT_SYMBOL_GPL(max77693_bulk_write); +static const struct regmap_irq_chip max77693_led_irq_chip = { + .name = "max77693-led", + .status_base = MAX77693_LED_REG_FLASH_INT, + .mask_base = MAX77693_LED_REG_FLASH_INT_MASK, + .mask_invert = false, + .num_regs = 1, + .irqs = max77693_led_irqs, + .num_irqs = ARRAY_SIZE(max77693_led_irqs), +}; -int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask) -{ - int ret; +static const struct regmap_irq max77693_topsys_irqs[] = { + { .mask = TOPSYS_IRQ_T120C_INT, }, + { .mask = TOPSYS_IRQ_T140C_INT, }, + { .mask = TOPSYS_IRQ_LOWSYS_INT, }, +}; - ret = regmap_update_bits(map, reg, mask, val); +static const struct regmap_irq_chip max77693_topsys_irq_chip = { + .name = "max77693-topsys", + .status_base = MAX77693_PMIC_REG_TOPSYS_INT, + .mask_base = MAX77693_PMIC_REG_TOPSYS_INT_MASK, + .mask_invert = false, + .num_regs = 1, + .irqs = max77693_topsys_irqs, + .num_irqs = ARRAY_SIZE(max77693_topsys_irqs), +}; - return ret; -} -EXPORT_SYMBOL_GPL(max77693_update_reg); +static const struct regmap_irq max77693_charger_irqs[] = { + { .mask = CHG_IRQ_BYP_I, }, + { .mask = CHG_IRQ_THM_I, }, + { .mask = CHG_IRQ_BAT_I, }, + { .mask = CHG_IRQ_CHG_I, }, + { .mask = CHG_IRQ_CHGIN_I, }, +}; -static const struct regmap_config max77693_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .max_register = MAX77693_PMIC_REG_END, +static const struct regmap_irq_chip max77693_charger_irq_chip = { + .name = "max77693-charger", + .status_base = MAX77693_CHG_REG_CHG_INT, + .mask_base = MAX77693_CHG_REG_CHG_INT_MASK, + .mask_invert = false, + .num_regs = 1, + .irqs = max77693_charger_irqs, + .num_irqs = ARRAY_SIZE(max77693_charger_irqs), }; static const struct regmap_config max77693_regmap_muic_config = { @@ -113,11 +113,42 @@ static const struct regmap_config max77693_regmap_muic_config = { .max_register = MAX77693_MUIC_REG_END, }; +static const struct regmap_irq max77693_muic_irqs[] = { + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC, }, + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC_LOW, }, + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC_ERR, }, + { .reg_offset = 0, .mask = MUIC_IRQ_INT1_ADC1K, }, + + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_CHGTYP, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_CHGDETREUN, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_DCDTMR, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_DXOVP, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_VBVOLT, }, + { .reg_offset = 1, .mask = MUIC_IRQ_INT2_VIDRM, }, + + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_EOC, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_CGMBC, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_OVP, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_MBCCHG_ERR, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_CHG_ENABLED, }, + { .reg_offset = 2, .mask = MUIC_IRQ_INT3_BAT_DET, }, +}; + +static const struct regmap_irq_chip max77693_muic_irq_chip = { + .name = "max77693-muic", + .status_base = MAX77693_MUIC_REG_INT1, + .mask_base = MAX77693_MUIC_REG_INTMASK1, + .mask_invert = true, + .num_regs = 3, + .irqs = max77693_muic_irqs, + .num_irqs = ARRAY_SIZE(max77693_muic_irqs), +}; + static int max77693_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct max77693_dev *max77693; - u8 reg_data; + unsigned int reg_data; int ret = 0; max77693 = devm_kzalloc(&i2c->dev, @@ -139,7 +170,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, return ret; } - ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2, + ret = regmap_read(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2, ®_data); if (ret < 0) { dev_err(max77693->dev, "device not found on this channel\n"); @@ -176,9 +207,45 @@ static int max77693_i2c_probe(struct i2c_client *i2c, goto err_regmap_muic; } - ret = max77693_irq_init(max77693); - if (ret < 0) - goto err_irq; + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_led_irq_chip, + &max77693->irq_data_led); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_regmap_muic; + } + + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_topsys_irq_chip, + &max77693->irq_data_topsys); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_irq_topsys; + } + + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_charger_irq_chip, + &max77693->irq_data_charger); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_irq_charger; + } + + ret = regmap_add_irq_chip(max77693->regmap, max77693->irq, + IRQF_ONESHOT | IRQF_SHARED | + IRQF_TRIGGER_FALLING, 0, + &max77693_muic_irq_chip, + &max77693->irq_data_muic); + if (ret) { + dev_err(max77693->dev, "failed to add irq chip: %d\n", ret); + goto err_irq_muic; + } pm_runtime_set_active(max77693->dev); @@ -190,8 +257,14 @@ static int max77693_i2c_probe(struct i2c_client *i2c, return ret; err_mfd: - max77693_irq_exit(max77693); -err_irq: + mfd_remove_devices(max77693->dev); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic); +err_irq_muic: + regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger); +err_irq_charger: + regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys); +err_irq_topsys: + regmap_del_irq_chip(max77693->irq, max77693->irq_data_led); err_regmap_muic: i2c_unregister_device(max77693->haptic); err_i2c_haptic: @@ -204,7 +277,12 @@ static int max77693_i2c_remove(struct i2c_client *i2c) struct max77693_dev *max77693 = i2c_get_clientdata(i2c); mfd_remove_devices(max77693->dev); - max77693_irq_exit(max77693); + + regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys); + regmap_del_irq_chip(max77693->irq, max77693->irq_data_led); + i2c_unregister_device(max77693->muic); i2c_unregister_device(max77693->haptic); @@ -222,8 +300,11 @@ static int max77693_suspend(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct max77693_dev *max77693 = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) - irq_set_irq_wake(max77693->irq, 1); + if (device_may_wakeup(dev)) { + enable_irq_wake(max77693->irq); + disable_irq(max77693->irq); + } + return 0; } @@ -232,9 +313,12 @@ static int max77693_resume(struct device *dev) struct i2c_client *i2c = container_of(dev, struct i2c_client, dev); struct max77693_dev *max77693 = i2c_get_clientdata(i2c); - if (device_may_wakeup(dev)) - irq_set_irq_wake(max77693->irq, 0); - return max77693_irq_resume(max77693); + if (device_may_wakeup(dev)) { + disable_irq_wake(max77693->irq); + enable_irq(max77693->irq); + } + + return 0; } static const struct dev_pm_ops max77693_pm = { diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c index 653a58b49cd..c67ff05fc1d 100644 --- a/drivers/regulator/max77693.c +++ b/drivers/regulator/max77693.c @@ -31,6 +31,7 @@ #include <linux/mfd/max77693.h> #include <linux/mfd/max77693-private.h> #include <linux/regulator/of_regulator.h> +#include <linux/regmap.h> #define CHGIN_ILIM_STEP_20mA 20000 @@ -39,9 +40,9 @@ static int max77693_chg_is_enabled(struct regulator_dev *rdev) { int ret; - u8 val; + unsigned int val; - ret = max77693_read_reg(rdev->regmap, rdev->desc->enable_reg, &val); + ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val); if (ret) return ret; @@ -57,12 +58,11 @@ static int max77693_chg_get_current_limit(struct regulator_dev *rdev) { unsigned int chg_min_uA = rdev->constraints->min_uA; unsigned int chg_max_uA = rdev->constraints->max_uA; - u8 reg, sel; + unsigned int reg, sel; unsigned int val; int ret; - ret = max77693_read_reg(rdev->regmap, - MAX77693_CHG_REG_CHG_CNFG_09, ®); + ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, ®); if (ret < 0) return ret; @@ -96,7 +96,7 @@ static int max77693_chg_set_current_limit(struct regulator_dev *rdev, /* the first four codes for charger current are all 60mA */ sel += 3; - return max77693_write_reg(rdev->regmap, + return regmap_write(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, sel); } /* end of CHARGER regulator ops */ diff --git a/include/linux/extcon/sm5502.h b/include/linux/extcon/sm5502.h new file mode 100644 index 00000000000..030526bf8d7 --- /dev/null +++ b/include/linux/extcon/sm5502.h @@ -0,0 +1,287 @@ +/* + * sm5502.h + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_EXTCON_SM5502_H +#define __LINUX_EXTCON_SM5502_H + +enum sm5502_types { + TYPE_SM5502, +}; + +/* SM5502 registers */ +enum sm5502_reg { + SM5502_REG_DEVICE_ID = 0x01, + SM5502_REG_CONTROL, + SM5502_REG_INT1, + SM5502_REG_INT2, + SM5502_REG_INTMASK1, + SM5502_REG_INTMASK2, + SM5502_REG_ADC, + SM5502_REG_TIMING_SET1, + SM5502_REG_TIMING_SET2, + SM5502_REG_DEV_TYPE1, + SM5502_REG_DEV_TYPE2, + SM5502_REG_BUTTON1, + SM5502_REG_BUTTON2, + SM5502_REG_CAR_KIT_STATUS, + SM5502_REG_RSVD1, + SM5502_REG_RSVD2, + SM5502_REG_RSVD3, + SM5502_REG_RSVD4, + SM5502_REG_MANUAL_SW1, + SM5502_REG_MANUAL_SW2, + SM5502_REG_DEV_TYPE3, + SM5502_REG_RSVD5, + SM5502_REG_RSVD6, + SM5502_REG_RSVD7, + SM5502_REG_RSVD8, + SM5502_REG_RSVD9, + SM5502_REG_RESET, + SM5502_REG_RSVD10, + SM5502_REG_RESERVED_ID1, + SM5502_REG_RSVD11, + SM5502_REG_RSVD12, + SM5502_REG_RESERVED_ID2, + SM5502_REG_RSVD13, + SM5502_REG_OCP, + SM5502_REG_RSVD14, + SM5502_REG_RSVD15, + SM5502_REG_RSVD16, + SM5502_REG_RSVD17, + SM5502_REG_RSVD18, + SM5502_REG_RSVD19, + SM5502_REG_RSVD20, + SM5502_REG_RSVD21, + SM5502_REG_RSVD22, + SM5502_REG_RSVD23, + SM5502_REG_RSVD24, + SM5502_REG_RSVD25, + SM5502_REG_RSVD26, + SM5502_REG_RSVD27, + SM5502_REG_RSVD28, + SM5502_REG_RSVD29, + SM5502_REG_RSVD30, + SM5502_REG_RSVD31, + SM5502_REG_RSVD32, + SM5502_REG_RSVD33, + SM5502_REG_RSVD34, + SM5502_REG_RSVD35, + SM5502_REG_RSVD36, + SM5502_REG_RESERVED_ID3, + + SM5502_REG_END, +}; + +/* Define SM5502 MASK/SHIFT constant */ +#define SM5502_REG_DEVICE_ID_VENDOR_SHIFT 0 +#define SM5502_REG_DEVICE_ID_VERSION_SHIFT 3 +#define SM5502_REG_DEVICE_ID_VENDOR_MASK (0x3 << SM5502_REG_DEVICE_ID_VENDOR_SHIFT) +#define SM5502_REG_DEVICE_ID_VERSION_MASK (0x1f << SM5502_REG_DEVICE_ID_VERSION_SHIFT) + +#define SM5502_REG_CONTROL_MASK_INT_SHIFT 0 +#define SM5502_REG_CONTROL_WAIT_SHIFT 1 +#define SM5502_REG_CONTROL_MANUAL_SW_SHIFT 2 +#define SM5502_REG_CONTROL_RAW_DATA_SHIFT 3 +#define SM5502_REG_CONTROL_SW_OPEN_SHIFT 4 +#define SM5502_REG_CONTROL_MASK_INT_MASK (0x1 << SM5502_REG_CONTROL_MASK_INT_SHIFT) +#define SM5502_REG_CONTROL_WAIT_MASK (0x1 << SM5502_REG_CONTROL_WAIT_SHIFT) +#define SM5502_REG_CONTROL_MANUAL_SW_MASK (0x1 << SM5502_REG_CONTROL_MANUAL_SW_SHIFT) +#define SM5502_REG_CONTROL_RAW_DATA_MASK (0x1 << SM5502_REG_CONTROL_RAW_DATA_SHIFT) +#define SM5502_REG_CONTROL_SW_OPEN_MASK (0x1 << SM5502_REG_CONTROL_SW_OPEN_SHIFT) + +#define SM5502_REG_INTM1_ATTACH_SHIFT 0 +#define SM5502_REG_INTM1_DETACH_SHIFT 1 +#define SM5502_REG_INTM1_KP_SHIFT 2 +#define SM5502_REG_INTM1_LKP_SHIFT 3 +#define SM5502_REG_INTM1_LKR_SHIFT 4 +#define SM5502_REG_INTM1_OVP_EVENT_SHIFT 5 +#define SM5502_REG_INTM1_OCP_EVENT_SHIFT 6 +#define SM5502_REG_INTM1_OVP_OCP_DIS_SHIFT 7 +#define SM5502_REG_INTM1_ATTACH_MASK (0x1 << SM5502_REG_INTM1_ATTACH_SHIFT) +#define SM5502_REG_INTM1_DETACH_MASK (0x1 << SM5502_REG_INTM1_DETACH_SHIFT) +#define SM5502_REG_INTM1_KP_MASK (0x1 << SM5502_REG_INTM1_KP_SHIFT) +#define SM5502_REG_INTM1_LKP_MASK (0x1 << SM5502_REG_INTM1_LKP_SHIFT) +#define SM5502_REG_INTM1_LKR_MASK (0x1 << SM5502_REG_INTM1_LKR_SHIFT) +#define SM5502_REG_INTM1_OVP_EVENT_MASK (0x1 << SM5502_REG_INTM1_OVP_EVENT_SHIFT) +#define SM5502_REG_INTM1_OCP_EVENT_MASK (0x1 << SM5502_REG_INTM1_OCP_EVENT_SHIFT) +#define SM5502_REG_INTM1_OVP_OCP_DIS_MASK (0x1 << SM5502_REG_INTM1_OVP_OCP_DIS_SHIFT) + +#define SM5502_REG_INTM2_VBUS_DET_SHIFT 0 +#define SM5502_REG_INTM2_REV_ACCE_SHIFT 1 +#define SM5502_REG_INTM2_ADC_CHG_SHIFT 2 +#define SM5502_REG_INTM2_STUCK_KEY_SHIFT 3 +#define SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT 4 +#define SM5502_REG_INTM2_MHL_SHIFT 5 +#define SM5502_REG_INTM2_VBUS_DET_MASK (0x1 << SM5502_REG_INTM2_VBUS_DET_SHIFT) +#define SM5502_REG_INTM2_REV_ACCE_MASK (0x1 << SM5502_REG_INTM2_REV_ACCE_SHIFT) +#define SM5502_REG_INTM2_ADC_CHG_MASK (0x1 << SM5502_REG_INTM2_ADC_CHG_SHIFT) +#define SM5502_REG_INTM2_STUCK_KEY_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_SHIFT) +#define SM5502_REG_INTM2_STUCK_KEY_RCV_MASK (0x1 << SM5502_REG_INTM2_STUCK_KEY_RCV_SHIFT) +#define SM5502_REG_INTM2_MHL_MASK (0x1 << SM5502_REG_INTM2_MHL_SHIFT) + +#define SM5502_REG_ADC_SHIFT 0 +#define SM5502_REG_ADC_MASK (0x1f << SM5502_REG_ADC_SHIFT) + +#define SM5502_REG_TIMING_SET1_KEY_PRESS_SHIFT 4 +#define SM5502_REG_TIMING_SET1_KEY_PRESS_MASK (0xf << SM5502_REG_TIMING_SET1_KEY_PRESS_SHIFT) +#define TIMING_KEY_PRESS_100MS 0x0 +#define TIMING_KEY_PRESS_200MS 0x1 +#define TIMING_KEY_PRESS_300MS 0x2 +#define TIMING_KEY_PRESS_400MS 0x3 +#define TIMING_KEY_PRESS_500MS 0x4 +#define TIMING_KEY_PRESS_600MS 0x5 +#define TIMING_KEY_PRESS_700MS 0x6 +#define TIMING_KEY_PRESS_800MS 0x7 +#define TIMING_KEY_PRESS_900MS 0x8 +#define TIMING_KEY_PRESS_1000MS 0x9 +#define SM5502_REG_TIMING_SET1_ADC_DET_SHIFT 0 +#define SM5502_REG_TIMING_SET1_ADC_DET_MASK (0xf << SM5502_REG_TIMING_SET1_ADC_DET_SHIFT) +#define TIMING_ADC_DET_50MS 0x0 +#define TIMING_ADC_DET_100MS 0x1 +#define TIMING_ADC_DET_150MS 0x2 +#define TIMING_ADC_DET_200MS 0x3 +#define TIMING_ADC_DET_300MS 0x4 +#define TIMING_ADC_DET_400MS 0x5 +#define TIMING_ADC_DET_500MS 0x6 +#define TIMING_ADC_DET_600MS 0x7 +#define TIMING_ADC_DET_700MS 0x8 +#define TIMING_ADC_DET_800MS 0x9 +#define TIMING_ADC_DET_900MS 0xA +#define TIMING_ADC_DET_1000MS 0xB + +#define SM5502_REG_TIMING_SET2_SW_WAIT_SHIFT 4 +#define SM5502_REG_TIMING_SET2_SW_WAIT_MASK (0xf << SM5502_REG_TIMING_SET2_SW_WAIT_SHIFT) +#define TIMING_SW_WAIT_10MS 0x0 +#define TIMING_SW_WAIT_30MS 0x1 +#define TIMING_SW_WAIT_50MS 0x2 +#define TIMING_SW_WAIT_70MS 0x3 +#define TIMING_SW_WAIT_90MS 0x4 +#define TIMING_SW_WAIT_110MS 0x5 +#define TIMING_SW_WAIT_130MS 0x6 +#define TIMING_SW_WAIT_150MS 0x7 +#define TIMING_SW_WAIT_170MS 0x8 +#define TIMING_SW_WAIT_190MS 0x9 +#define TIMING_SW_WAIT_210MS 0xA +#define SM5502_REG_TIMING_SET2_LONG_KEY_SHIFT 0 +#define SM5502_REG_TIMING_SET2_LONG_KEY_MASK (0xf << SM5502_REG_TIMING_SET2_LONG_KEY_SHIFT) +#define TIMING_LONG_KEY_300MS 0x0 +#define TIMING_LONG_KEY_400MS 0x1 +#define TIMING_LONG_KEY_500MS 0x2 +#define TIMING_LONG_KEY_600MS 0x3 +#define TIMING_LONG_KEY_700MS 0x4 +#define TIMING_LONG_KEY_800MS 0x5 +#define TIMING_LONG_KEY_900MS 0x6 +#define TIMING_LONG_KEY_1000MS 0x7 +#define TIMING_LONG_KEY_1100MS 0x8 +#define TIMING_LONG_KEY_1200MS 0x9 +#define TIMING_LONG_KEY_1300MS 0xA +#define TIMING_LONG_KEY_1400MS 0xB +#define TIMING_LONG_KEY_1500MS 0xC + +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_SHIFT 0 +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE2_SHIFT 1 +#define SM5502_REG_DEV_TYPE1_USB_SDP_SHIFT 2 +#define SM5502_REG_DEV_TYPE1_UART_SHIFT 3 +#define SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_SHIFT 4 +#define SM5502_REG_DEV_TYPE1_USB_CHG_SHIFT 5 +#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT 6 +#define SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT 7 +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_MASK (0x1 << SM5502_REG_DEV_TYPE1_AUDIO_TYPE1_SHIFT) +#define SM5502_REG_DEV_TYPE1_AUDIO_TYPE1__MASK (0x1 << SM5502_REG_DEV_TYPE1_AUDIO_TYPE2_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_SDP_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_SDP_SHIFT) +#define SM5502_REG_DEV_TYPE1_UART_MASK (0x1 << SM5502_REG_DEV_TYPE1_UART_SHIFT) +#define SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_MASK (0x1 << SM5502_REG_DEV_TYPE1_CAR_KIT_CHARGER_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_CHG_SHIFT) +#define SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK (0x1 << SM5502_REG_DEV_TYPE1_DEDICATED_CHG_SHIFT) +#define SM5502_REG_DEV_TYPE1_USB_OTG_MASK (0x1 << SM5502_REG_DEV_TYPE1_USB_OTG_SHIFT) + +#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT 0 +#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT 1 +#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT 2 +#define SM5502_REG_DEV_TYPE2_JIG_UART_OFF_SHIFT 3 +#define SM5502_REG_DEV_TYPE2_PPD_SHIFT 4 +#define SM5502_REG_DEV_TYPE2_TTY_SHIFT 5 +#define SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT 6 +#define SM5502_REG_DEV_TYPE2_JIG_USB_ON_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_USB_ON_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_USB_OFF_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_USB_OFF_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_UART_ON_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_UART_ON_SHIFT) +#define SM5502_REG_DEV_TYPE2_JIG_UART_OFF_MASK (0x1 << SM5502_REG_DEV_TYPE2_JIG_UART_OFF_SHIFT) +#define SM5502_REG_DEV_TYPE2_PPD_MASK (0x1 << SM5502_REG_DEV_TYPE2_PPD_SHIFT) +#define SM5502_REG_DEV_TYPE2_TTY_MASK (0x1 << SM5502_REG_DEV_TYPE2_TTY_SHIFT) +#define SM5502_REG_DEV_TYPE2_AV_CABLE_MASK (0x1 << SM5502_REG_DEV_TYPE2_AV_CABLE_SHIFT) + +#define SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT 0 +#define SM5502_REG_MANUAL_SW1_DP_SHIFT 2 +#define SM5502_REG_MANUAL_SW1_DM_SHIFT 5 +#define SM5502_REG_MANUAL_SW1_VBUSIN_MASK (0x3 << SM5502_REG_MANUAL_SW1_VBUSIN_SHIFT) +#define SM5502_REG_MANUAL_SW1_DP_MASK (0x7 << SM5502_REG_MANUAL_SW1_DP_SHIFT) +#define SM5502_REG_MANUAL_SW1_DM_MASK (0x7 << SM5502_REG_MANUAL_SW1_DM_SHIFT) +#define VBUSIN_SWITCH_OPEN 0x0 +#define VBUSIN_SWITCH_VBUSOUT 0x1 +#define VBUSIN_SWITCH_MIC 0x2 +#define VBUSIN_SWITCH_VBUSOUT_WITH_USB 0x3 +#define DM_DP_CON_SWITCH_OPEN 0x0 +#define DM_DP_CON_SWITCH_USB 0x1 +#define DM_DP_CON_SWITCH_AUDIO 0x2 +#define DM_DP_CON_SWITCH_UART 0x3 +#define DM_DP_SWITCH_OPEN ((DM_DP_CON_SWITCH_OPEN <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \ + | (DM_DP_CON_SWITCH_OPEN <<SM5502_REG_MANUAL_SW1_DM_SHIFT)) +#define DM_DP_SWITCH_USB ((DM_DP_CON_SWITCH_USB <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \ + | (DM_DP_CON_SWITCH_USB <<SM5502_REG_MANUAL_SW1_DM_SHIFT)) +#define DM_DP_SWITCH_AUDIO ((DM_DP_CON_SWITCH_AUDIO <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \ + | (DM_DP_CON_SWITCH_AUDIO <<SM5502_REG_MANUAL_SW1_DM_SHIFT)) +#define DM_DP_SWITCH_UART ((DM_DP_CON_SWITCH_UART <<SM5502_REG_MANUAL_SW1_DP_SHIFT) \ + | (DM_DP_CON_SWITCH_UART <<SM5502_REG_MANUAL_SW1_DM_SHIFT)) + +/* SM5502 Interrupts */ +enum sm5502_irq { + /* INT1 */ + SM5502_IRQ_INT1_ATTACH, + SM5502_IRQ_INT1_DETACH, + SM5502_IRQ_INT1_KP, + SM5502_IRQ_INT1_LKP, + SM5502_IRQ_INT1_LKR, + SM5502_IRQ_INT1_OVP_EVENT, + SM5502_IRQ_INT1_OCP_EVENT, + SM5502_IRQ_INT1_OVP_OCP_DIS, + + /* INT2 */ + SM5502_IRQ_INT2_VBUS_DET, + SM5502_IRQ_INT2_REV_ACCE, + SM5502_IRQ_INT2_ADC_CHG, + SM5502_IRQ_INT2_STUCK_KEY, + SM5502_IRQ_INT2_STUCK_KEY_RCV, + SM5502_IRQ_INT2_MHL, + + SM5502_IRQ_NUM, +}; + +#define SM5502_IRQ_INT1_ATTACH_MASK BIT(0) +#define SM5502_IRQ_INT1_DETACH_MASK BIT(1) +#define SM5502_IRQ_INT1_KP_MASK BIT(2) +#define SM5502_IRQ_INT1_LKP_MASK BIT(3) +#define SM5502_IRQ_INT1_LKR_MASK BIT(4) +#define SM5502_IRQ_INT1_OVP_EVENT_MASK BIT(5) +#define SM5502_IRQ_INT1_OCP_EVENT_MASK BIT(6) +#define SM5502_IRQ_INT1_OVP_OCP_DIS_MASK BIT(7) +#define SM5502_IRQ_INT2_VBUS_DET_MASK BIT(0) +#define SM5502_IRQ_INT2_REV_ACCE_MASK BIT(1) +#define SM5502_IRQ_INT2_ADC_CHG_MASK BIT(2) +#define SM5502_IRQ_INT2_STUCK_KEY_MASK BIT(3) +#define SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK BIT(4) +#define SM5502_IRQ_INT2_MHL_MASK BIT(5) + +#endif /* __LINUX_EXTCON_SM5502_H */ diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h index 12a5c135c74..4578c72c9b8 100644 --- a/include/linux/mfd/arizona/pdata.h +++ b/include/linux/mfd/arizona/pdata.h @@ -127,6 +127,9 @@ struct arizona_pdata { /** Internal pull on GPIO5 is disabled when used for jack detection */ bool jd_gpio5_nopull; + /** set to true if jackdet contact opens on insert */ + bool jd_invert; + /** Use the headphone detect circuit to identify the accessory */ bool hpdet_acc_id; diff --git a/include/linux/mfd/max77693-private.h b/include/linux/mfd/max77693-private.h index 3e050b933dd..c466ff3e16b 100644 --- a/include/linux/mfd/max77693-private.h +++ b/include/linux/mfd/max77693-private.h @@ -262,6 +262,41 @@ enum max77693_irq_source { MAX77693_IRQ_GROUP_NR, }; +#define LED_IRQ_FLED2_OPEN BIT(0) +#define LED_IRQ_FLED2_SHORT BIT(1) +#define LED_IRQ_FLED1_OPEN BIT(2) +#define LED_IRQ_FLED1_SHORT BIT(3) +#define LED_IRQ_MAX_FLASH BIT(4) + +#define TOPSYS_IRQ_T120C_INT BIT(0) +#define TOPSYS_IRQ_T140C_INT BIT(1) +#define TOPSYS_IRQ_LOWSYS_INT BIT(3) + +#define CHG_IRQ_BYP_I BIT(0) +#define CHG_IRQ_THM_I BIT(2) +#define CHG_IRQ_BAT_I BIT(3) +#define CHG_IRQ_CHG_I BIT(4) +#define CHG_IRQ_CHGIN_I BIT(6) + +#define MUIC_IRQ_INT1_ADC BIT(0) +#define MUIC_IRQ_INT1_ADC_LOW BIT(1) +#define MUIC_IRQ_INT1_ADC_ERR BIT(2) +#define MUIC_IRQ_INT1_ADC1K BIT(3) + +#define MUIC_IRQ_INT2_CHGTYP BIT(0) +#define MUIC_IRQ_INT2_CHGDETREUN BIT(1) +#define MUIC_IRQ_INT2_DCDTMR BIT(2) +#define MUIC_IRQ_INT2_DXOVP BIT(3) +#define MUIC_IRQ_INT2_VBVOLT BIT(4) +#define MUIC_IRQ_INT2_VIDRM BIT(5) + +#define MUIC_IRQ_INT3_EOC BIT(0) +#define MUIC_IRQ_INT3_CGMBC BIT(1) +#define MUIC_IRQ_INT3_OVP BIT(2) +#define MUIC_IRQ_INT3_MBCCHG_ERR BIT(3) +#define MUIC_IRQ_INT3_CHG_ENABLED BIT(4) +#define MUIC_IRQ_INT3_BAT_DET BIT(5) + enum max77693_irq { /* PMIC - FLASH */ MAX77693_LED_IRQ_FLED2_OPEN, @@ -282,6 +317,10 @@ enum max77693_irq { MAX77693_CHG_IRQ_CHG_I, MAX77693_CHG_IRQ_CHGIN_I, + MAX77693_IRQ_NR, +}; + +enum max77693_irq_muic { /* MUIC INT1 */ MAX77693_MUIC_IRQ_INT1_ADC, MAX77693_MUIC_IRQ_INT1_ADC_LOW, @@ -304,7 +343,7 @@ enum max77693_irq { MAX77693_MUIC_IRQ_INT3_CHG_ENABLED, MAX77693_MUIC_IRQ_INT3_BAT_DET, - MAX77693_IRQ_NR, + MAX77693_MUIC_IRQ_NR, }; struct max77693_dev { @@ -319,7 +358,10 @@ struct max77693_dev { struct regmap *regmap_muic; struct regmap *regmap_haptic; - struct irq_domain *irq_domain; + struct regmap_irq_chip_data *irq_data_led; + struct regmap_irq_chip_data *irq_data_topsys; + struct regmap_irq_chip_data *irq_data_charger; + struct regmap_irq_chip_data *irq_data_muic; int irq; int irq_gpio; @@ -332,14 +374,6 @@ enum max77693_types { TYPE_MAX77693, }; -extern int max77693_read_reg(struct regmap *map, u8 reg, u8 *dest); -extern int max77693_bulk_read(struct regmap *map, u8 reg, int count, - u8 *buf); -extern int max77693_write_reg(struct regmap *map, u8 reg, u8 value); -extern int max77693_bulk_write(struct regmap *map, u8 reg, int count, - u8 *buf); -extern int max77693_update_reg(struct regmap *map, u8 reg, u8 val, u8 mask); - extern int max77693_irq_init(struct max77693_dev *max77686); extern void max77693_irq_exit(struct max77693_dev *max77686); extern int max77693_irq_resume(struct max77693_dev *max77686); |