diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/micrel.txt | 6 | ||||
| -rw-r--r-- | drivers/net/phy/micrel.c | 31 | ||||
| -rw-r--r-- | include/linux/micrel_phy.h | 1 |
3 files changed, 36 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index 98a3e61f9ee..e1d99b95c4e 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -16,3 +16,9 @@ Optional properties: KSZ8051: register 0x1f, bits 5..4 See the respective PHY datasheet for the mode values. + + - clocks, clock-names: contains clocks according to the common clock bindings. + + supported clocks: + - KSZ8021, KSZ8031: "rmii-ref": The RMII refence input clock. Used + to determine the XI input clock. diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 011dbda2b2f..492435fce1d 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -26,6 +26,7 @@ #include <linux/phy.h> #include <linux/micrel_phy.h> #include <linux/of.h> +#include <linux/clk.h> /* Operation Mode Strap Override */ #define MII_KSZPHY_OMSO 0x16 @@ -72,9 +73,12 @@ static int ksz_config_flags(struct phy_device *phydev) { int regval; - if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) { + if (phydev->dev_flags & (MICREL_PHY_50MHZ_CLK | MICREL_PHY_25MHZ_CLK)) { regval = phy_read(phydev, MII_KSZPHY_CTRL); - regval |= KSZ8051_RMII_50MHZ_CLK; + if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) + regval |= KSZ8051_RMII_50MHZ_CLK; + else + regval &= ~KSZ8051_RMII_50MHZ_CLK; return phy_write(phydev, MII_KSZPHY_CTRL, regval); } return 0; @@ -440,6 +444,27 @@ ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int ptrad, int devnum, { } +static int ksz8021_probe(struct phy_device *phydev) +{ + struct clk *clk; + + clk = devm_clk_get(&phydev->dev, "rmii-ref"); + if (!IS_ERR(clk)) { + unsigned long rate = clk_get_rate(clk); + + if (rate > 24500000 && rate < 25500000) { + phydev->dev_flags |= MICREL_PHY_25MHZ_CLK; + } else if (rate > 49500000 && rate < 50500000) { + phydev->dev_flags |= MICREL_PHY_50MHZ_CLK; + } else { + dev_err(&phydev->dev, "Clock rate out of range: %ld\n", rate); + return -EINVAL; + } + } + + return 0; +} + static struct phy_driver ksphy_driver[] = { { .phy_id = PHY_ID_KS8737, @@ -462,6 +487,7 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .probe = ksz8021_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, @@ -477,6 +503,7 @@ static struct phy_driver ksphy_driver[] = { .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause), .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .probe = ksz8021_probe, .config_init = ksz8021_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, diff --git a/include/linux/micrel_phy.h b/include/linux/micrel_phy.h index 2e5b194b9b1..53d33dee70e 100644 --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -37,6 +37,7 @@ /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 +#define MICREL_PHY_25MHZ_CLK 0x00000002 #define MICREL_KSZ9021_EXTREG_CTRL 0xB #define MICREL_KSZ9021_EXTREG_DATA_WRITE 0xC |