diff options
| -rw-r--r-- | arch/arm/mach-at91/board-sam9261ek.c | 52 |
1 files changed, 50 insertions, 2 deletions
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b7e772467cf..bcf71536cc6 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -25,6 +25,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> #include <linux/dm9000.h> #include <asm/hardware.h> @@ -195,6 +196,41 @@ static struct at91_nand_data __initdata ek_nand_data = { }; /* + * ADS7846 Touchscreen + */ +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + +static int ads7843_pendown_state(void) +{ + return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */ +} + +static struct ads7846_platform_data ads_info = { + .model = 7843, + .x_min = 150, + .x_max = 3830, + .y_min = 190, + .y_max = 3830, + .vref_delay_usecs = 100, + .x_plate_ohms = 450, + .y_plate_ohms = 250, + .pressure_max = 15000, + .debounce_max = 1, + .debounce_rep = 0, + .debounce_tol = (~0), + .get_pendown_state = ads7843_pendown_state, +}; + +static void __init ek_add_device_ts(void) +{ + at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */ + at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */ +} +#else +static void __init ek_add_device_ts(void) {} +#endif + +/* * SPI devices */ static struct spi_board_info ek_spi_devices[] = { @@ -204,6 +240,16 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 15 * 1000 * 1000, .bus_num = 0, }, +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) + { + .modalias = "ads7846", + .chip_select = 2, + .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */ + .bus_num = 0, + .platform_data = &ads_info, + .irq = AT91SAM9261_ID_IRQ0, + }, +#endif #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */ .modalias = "mtd_dataflash", @@ -211,9 +257,9 @@ static struct spi_board_info ek_spi_devices[] = { .max_speed_hz = 15 * 1000 * 1000, .bus_num = 0, }, -#elif defined(CONFIG_SND_AT73C213) +#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE) { /* AT73C213 DAC */ - .modalias = "snd_at73c213", + .modalias = "at73c213", .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, @@ -241,6 +287,8 @@ static void __init ek_board_init(void) #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* SPI */ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); + /* Touchscreen */ + ek_add_device_ts(); #else /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); |