diff options
| -rw-r--r-- | arch/arm/mach-omap1/include/mach/usb.h | 38 | ||||
| -rw-r--r-- | include/linux/platform_data/usb-omap1.h | 51 |
2 files changed, 52 insertions, 37 deletions
diff --git a/arch/arm/mach-omap1/include/mach/usb.h b/arch/arm/mach-omap1/include/mach/usb.h index 45e5ac707cb..2c263051dc5 100644 --- a/arch/arm/mach-omap1/include/mach/usb.h +++ b/arch/arm/mach-omap1/include/mach/usb.h @@ -8,43 +8,7 @@ #define is_usb0_device(config) 0 #endif -struct omap_usb_config { - /* Configure drivers according to the connectors on your board: - * - "A" connector (rectagular) - * ... for host/OHCI use, set "register_host". - * - "B" connector (squarish) or "Mini-B" - * ... for device/gadget use, set "register_dev". - * - "Mini-AB" connector (very similar to Mini-B) - * ... for OTG use as device OR host, initialize "otg" - */ - unsigned register_host:1; - unsigned register_dev:1; - u8 otg; /* port number, 1-based: usb1 == 2 */ - - u8 hmc_mode; - - /* implicitly true if otg: host supports remote wakeup? */ - u8 rwc; - - /* signaling pins used to talk to transceiver on usbN: - * 0 == usbN unused - * 2 == usb0-only, using internal transceiver - * 3 == 3 wire bidirectional - * 4 == 4 wire bidirectional - * 6 == 6 wire unidirectional (or TLL) - */ - u8 pins[3]; - - struct platform_device *udc_device; - struct platform_device *ohci_device; - struct platform_device *otg_device; - - u32 (*usb0_init)(unsigned nwires, unsigned is_device); - u32 (*usb1_init)(unsigned nwires); - u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); - - int (*ocpi_enable)(void); -}; +#include <linux/platform_data/usb-omap1.h> void omap_otg_init(struct omap_usb_config *config); diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h new file mode 100644 index 00000000000..8c7764ddd28 --- /dev/null +++ b/include/linux/platform_data/usb-omap1.h @@ -0,0 +1,51 @@ +/* + * Platform data for OMAP1 USB + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __LINUX_USB_OMAP1_H +#define __LINUX_USB_OMAP1_H + +#include <linux/platform_device.h> + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; + + struct platform_device *udc_device; + struct platform_device *ohci_device; + struct platform_device *otg_device; + + u32 (*usb0_init)(unsigned nwires, unsigned is_device); + u32 (*usb1_init)(unsigned nwires); + u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup); + + int (*ocpi_enable)(void); +}; + +#endif /* __LINUX_USB_OMAP1_H */ |