diff options
| -rw-r--r-- | arch/ppc/configs/oak_defconfig | 485 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/Kconfig | 6 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/Makefile | 1 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/oak.c | 255 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/oak.h | 96 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/oak_setup.h | 50 | ||||
| -rw-r--r-- | include/asm-ppc/ibm4xx.h | 4 |
7 files changed, 1 insertions, 896 deletions
diff --git a/arch/ppc/configs/oak_defconfig b/arch/ppc/configs/oak_defconfig deleted file mode 100644 index 366cc480cea..00000000000 --- a/arch/ppc/configs/oak_defconfig +++ /dev/null @@ -1,485 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y - -# -# General setup -# -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -CONFIG_KMOD=y - -# -# Platform support -# -CONFIG_PPC=y -CONFIG_PPC32=y -# CONFIG_6xx is not set -CONFIG_40x=y -# CONFIG_POWER3 is not set -# CONFIG_8xx is not set -CONFIG_4xx=y - -# -# IBM 4xx options -# -# CONFIG_ASH is not set -# CONFIG_BEECH is not set -# CONFIG_CEDAR is not set -# CONFIG_CPCI405 is not set -# CONFIG_EP405 is not set -CONFIG_OAK=y -# CONFIG_REDWOOD_4 is not set -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -# CONFIG_SYCAMORE is not set -# CONFIG_TIVO is not set -# CONFIG_WALNUT is not set -CONFIG_IBM405_ERR51=y -CONFIG_403GCX=y -# CONFIG_405_DMA is not set -# CONFIG_PM is not set -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set - -# -# General setup -# -# CONFIG_HIGHMEM is not set -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PC_KEYBOARD is not set -CONFIG_KCORE_ELF=y -CONFIG_BINFMT_ELF=y -CONFIG_KERNEL_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_HOTPLUG is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# ATA/IDE/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI support -# -# CONFIG_SCSI is not set - -# -# Fusion MPT device support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -# CONFIG_NETFILTER is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_INET_ECN is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_IPV6 is not set -# CONFIG_XFRM_USER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -CONFIG_IPV6_SCTP__=y -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_HW_FLOWCONTROL is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_ETHERTAP is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -CONFIG_OAKNET=y - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices (depends on LLC=y) -# -# CONFIG_SHAPER is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN_BOOL is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set - -# -# Input Device Drivers -# - -# -# Macintosh device drivers -# - -# -# Character devices -# -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# I2C Hardware Sensors Mainboard support -# - -# -# I2C Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set - -# -# Mice -# -# CONFIG_BUSMOUSE is not set -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_HANGCHECK_TIMER is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_DEVFS_FS is not set -CONFIG_TMPFS=y -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SUNRPC_GSS is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_INTERMEZZO_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# IBM 40x options -# - -# -# USB support -# -# CONFIG_USB_GADGET is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set - -# -# Library routines -# -# CONFIG_CRC32 is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index a7eaba91dfb..8772ae11a95 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -32,11 +32,6 @@ config EP405 help This option enables support for the EP405/EP405PC boards. -config OAK - bool "Oak" - help - This option enables support for the IBM 403GCX evaluation board. - config REDWOOD_5 bool "Redwood-5" help @@ -181,6 +176,7 @@ config BIOS_FIXUP depends on BUBINGA || EP405 || SYCAMORE || WALNUT default y +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards config 403GCX bool depends OAK diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index f00e0d02ee2..1dd6d7fd6a9 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_EP405) += ep405.o obj-$(CONFIG_BUBINGA) += bubinga.o obj-$(CONFIG_LUAN) += luan.o -obj-$(CONFIG_OAK) += oak.o obj-$(CONFIG_OCOTEA) += ocotea.o obj-$(CONFIG_REDWOOD_5) += redwood5.o obj-$(CONFIG_REDWOOD_6) += redwood6.o diff --git a/arch/ppc/platforms/4xx/oak.c b/arch/ppc/platforms/4xx/oak.c deleted file mode 100644 index fa25ee1fa73..00000000000 --- a/arch/ppc/platforms/4xx/oak.c +++ /dev/null @@ -1,255 +0,0 @@ -/* - * - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oak.c - * - * Description: - * Architecture- / platform-specific boot-time initialization code for - * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original - * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek - * <dan@net4x.com>. - * - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/threads.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/initrd.h> -#include <linux/irq.h> -#include <linux/seq_file.h> - -#include <asm/board.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/bootinfo.h> -#include <asm/ppc4xx_pic.h> -#include <asm/time.h> - -#include "oak.h" - -/* Function Prototypes */ - -extern void abort(void); - -/* Global Variables */ - -unsigned char __res[sizeof(bd_t)]; - - -/* - * void __init oak_init() - * - * Description: - * This routine... - * - * Input(s): - * r3 - Optional pointer to a board information structure. - * r4 - Optional pointer to the physical starting address of the init RAM - * disk. - * r5 - Optional pointer to the physical ending address of the init RAM - * disk. - * r6 - Optional pointer to the physical starting address of any kernel - * command-line parameters. - * r7 - Optional pointer to the physical ending address of any kernel - * command-line parameters. - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t)); - } - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *)(r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *)(r6 + KERNELBASE)); - } - - /* Initialize machine-dependency vectors */ - - ppc_md.setup_arch = oak_setup_arch; - ppc_md.show_percpuinfo = oak_show_percpuinfo; - ppc_md.irq_canonicalize = NULL; - ppc_md.init_IRQ = ppc4xx_pic_init; - ppc_md.get_irq = NULL; /* Set in ppc4xx_pic_init() */ - ppc_md.init = NULL; - - ppc_md.restart = oak_restart; - ppc_md.power_off = oak_power_off; - ppc_md.halt = oak_halt; - - ppc_md.time_init = oak_time_init; - ppc_md.set_rtc_time = oak_set_rtc_time; - ppc_md.get_rtc_time = oak_get_rtc_time; - ppc_md.calibrate_decr = oak_calibrate_decr; -} - -/* - * Document me. - */ -void __init -oak_setup_arch(void) -{ - /* XXX - Implement me */ -} - -/* - * int oak_show_percpuinfo() - * - * Description: - * This routine pretty-prints the platform's internal CPU and bus clock - * frequencies into the buffer for usage in /proc/cpuinfo. - * - * Input(s): - * *buffer - Buffer into which CPU and bus clock frequencies are to be - * printed. - * - * Output(s): - * *buffer - Buffer with the CPU and bus clock frequencies. - * - * Returns: - * The number of bytes copied into 'buffer' if OK, otherwise zero or less - * on error. - */ -int -oak_show_percpuinfo(struct seq_file *m, int i) -{ - bd_t *bp = (bd_t *)__res; - - seq_printf(m, "clock\t\t: %dMHz\n" - "bus clock\t\t: %dMHz\n", - bp->bi_intfreq / 1000000, - bp->bi_busfreq / 1000000); - - return 0; -} - -/* - * Document me. - */ -void -oak_restart(char *cmd) -{ - abort(); -} - -/* - * Document me. - */ -void -oak_power_off(void) -{ - oak_restart(NULL); -} - -/* - * Document me. - */ -void -oak_halt(void) -{ - oak_restart(NULL); -} - -/* - * Document me. - */ -long __init -oak_time_init(void) -{ - /* XXX - Implement me */ - return 0; -} - -/* - * Document me. - */ -int __init -oak_set_rtc_time(unsigned long time) -{ - /* XXX - Implement me */ - - return (0); -} - -/* - * Document me. - */ -unsigned long __init -oak_get_rtc_time(void) -{ - /* XXX - Implement me */ - - return (0); -} - -/* - * void __init oak_calibrate_decr() - * - * Description: - * This routine retrieves the internal processor frequency from the board - * information structure, sets up the kernel timer decrementer based on - * that value, enables the 403 programmable interval timer (PIT) and sets - * it up for auto-reload. - * - * Input(s): - * N/A - * - * Output(s): - * N/A - * - * Returns: - * N/A - * - */ -void __init -oak_calibrate_decr(void) -{ - unsigned int freq; - bd_t *bip = (bd_t *)__res; - - freq = bip->bi_intfreq; - - decrementer_count = freq / HZ; - count_period_num = 1; - count_period_den = freq; - - /* Enable the PIT and set auto-reload of its value */ - - mtspr(SPRN_TCR, TCR_PIE | TCR_ARE); - - /* Clear any pending timer interrupts */ - - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS); -} diff --git a/arch/ppc/platforms/4xx/oak.h b/arch/ppc/platforms/4xx/oak.h deleted file mode 100644 index 1b86a4c66b0..00000000000 --- a/arch/ppc/platforms/4xx/oak.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oak.h - * - * Description: - * Macros, definitions, and data structures specific to the IBM PowerPC - * 403G{A,B,C,CX} "Oak" evaluation board. Anything specific to the pro- - * cessor itself is defined elsewhere. - * - */ - -#ifdef __KERNEL__ -#ifndef __ASM_OAK_H__ -#define __ASM_OAK_H__ - -/* We have an IBM 403G{A,B,C,CX} core */ -#include <asm/ibm403.h> - -#define _IO_BASE 0 -#define _ISA_MEM_BASE 0 -#define PCI_DRAM_OFFSET 0 - -/* Memory map for the "Oak" evaluation board */ - -#define PPC403SPU_IO_BASE 0x40000000 /* 403 On-chip serial port */ -#define PPC403SPU_IO_SIZE 0x00000008 -#define OAKSERIAL_IO_BASE 0x7E000000 /* NS16550DV serial port */ -#define OAKSERIAL_IO_SIZE 0x00000008 -#define OAKNET_IO_BASE 0xF4000000 /* NS83902AV Ethernet */ -#define OAKNET_IO_SIZE 0x00000040 -#define OAKPROM_IO_BASE 0xFFFE0000 /* AMD 29F010 Flash ROM */ -#define OAKPROM_IO_SIZE 0x00020000 - - -/* Interrupt assignments fixed by the hardware implementation */ - -/* This is annoying kbuild-2.4 problem. -- Tom */ - -#define PPC403SPU_RX_INT 4 /* AIC_INT4 */ -#define PPC403SPU_TX_INT 5 /* AIC_INT5 */ -#define OAKNET_INT 27 /* AIC_INT27 */ -#define OAKSERIAL_INT 28 /* AIC_INT28 */ - -#ifndef __ASSEMBLY__ -/* - * Data structure defining board information maintained by the boot - * ROM on IBM's "Oak" evaluation board. An effort has been made to - * keep the field names consistent with the 8xx 'bd_t' board info - * structures. - */ - -typedef struct board_info { - unsigned char bi_s_version[4]; /* Version of this structure */ - unsigned char bi_r_version[30]; /* Version of the IBM ROM */ - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* Bus speed, in Hz */ -} bd_t; - -#ifdef __cplusplus -extern "C" { -#endif - -extern void oak_init(unsigned long r3, - unsigned long ird_start, - unsigned long ird_end, - unsigned long cline_start, - unsigned long cline_end); -extern void oak_setup_arch(void); -extern int oak_setup_residual(char *buffer); -extern void oak_init_IRQ(void); -extern int oak_get_irq(struct pt_regs *regs); -extern void oak_restart(char *cmd); -extern void oak_power_off(void); -extern void oak_halt(void); -extern void oak_time_init(void); -extern int oak_set_rtc_time(unsigned long now); -extern unsigned long oak_get_rtc_time(void); -extern void oak_calibrate_decr(void); - -#ifdef __cplusplus -} -#endif - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -#define PPC4xx_MACHINE_NAME "IBM Oak" - -#endif /* !__ASSEMBLY__ */ -#endif /* __ASM_OAK_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/oak_setup.h b/arch/ppc/platforms/4xx/oak_setup.h deleted file mode 100644 index 8648bd084df..00000000000 --- a/arch/ppc/platforms/4xx/oak_setup.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Module name: oak_setup.h - * - * Description: - * Architecture- / platform-specific boot-time initialization code for - * the IBM PowerPC 403GCX "Oak" evaluation board. Adapted from original - * code by Gary Thomas, Cort Dougan <cort@cs.nmt.edu>, and Dan Malek - * <dan@netx4.com>. - * - */ - -#ifndef __OAK_SETUP_H__ -#define __OAK_SETUP_H__ - -#include <asm/ptrace.h> -#include <asm/board.h> - - -#ifdef __cplusplus -extern "C" { -#endif - -extern unsigned char __res[sizeof(bd_t)]; - -extern void oak_init(unsigned long r3, - unsigned long ird_start, - unsigned long ird_end, - unsigned long cline_start, - unsigned long cline_end); -extern void oak_setup_arch(void); -extern int oak_setup_residual(char *buffer); -extern void oak_init_IRQ(void); -extern int oak_get_irq(struct pt_regs *regs); -extern void oak_restart(char *cmd); -extern void oak_power_off(void); -extern void oak_halt(void); -extern void oak_time_init(void); -extern int oak_set_rtc_time(unsigned long now); -extern unsigned long oak_get_rtc_time(void); -extern void oak_calibrate_decr(void); - - -#ifdef __cplusplus -} -#endif - -#endif /* __OAK_SETUP_H__ */ diff --git a/include/asm-ppc/ibm4xx.h b/include/asm-ppc/ibm4xx.h index d6852fa9852..7900d52d2a1 100644 --- a/include/asm-ppc/ibm4xx.h +++ b/include/asm-ppc/ibm4xx.h @@ -31,10 +31,6 @@ #include <platforms/4xx/ep405.h> #endif -#if defined(CONFIG_OAK) -#include <platforms/4xx/oak.h> -#endif - #if defined(CONFIG_REDWOOD_4) #include <platforms/4xx/redwood.h> #endif |