diff options
| -rw-r--r-- | include/linux/dmaengine.h | 28 |
1 files changed, 28 insertions, 0 deletions
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index ed92b30a02f..ba5f96db075 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -364,6 +364,32 @@ struct dma_slave_config { unsigned int slave_id; }; +/** + * enum dma_residue_granularity - Granularity of the reported transfer residue + * @DMA_RESIDUE_GRANULARITY_DESCRIPTOR: Residue reporting is not support. The + * DMA channel is only able to tell whether a descriptor has been completed or + * not, which means residue reporting is not supported by this channel. The + * residue field of the dma_tx_state field will always be 0. + * @DMA_RESIDUE_GRANULARITY_SEGMENT: Residue is updated after each successfully + * completed segment of the transfer (For cyclic transfers this is after each + * period). This is typically implemented by having the hardware generate an + * interrupt after each transferred segment and then the drivers updates the + * outstanding residue by the size of the segment. Another possibility is if + * the hardware supports scatter-gather and the segment descriptor has a field + * which gets set after the segment has been completed. The driver then counts + * the number of segments without the flag set to compute the residue. + * @DMA_RESIDUE_GRANULARITY_BURST: Residue is updated after each transferred + * burst. This is typically only supported if the hardware has a progress + * register of some sort (E.g. a register with the current read/write address + * or a register with the amount of bursts/beats/bytes that have been + * transferred or still need to be transferred). + */ +enum dma_residue_granularity { + DMA_RESIDUE_GRANULARITY_DESCRIPTOR = 0, + DMA_RESIDUE_GRANULARITY_SEGMENT = 1, + DMA_RESIDUE_GRANULARITY_BURST = 2, +}; + /* struct dma_slave_caps - expose capabilities of a slave channel only * * @src_addr_widths: bit mask of src addr widths the channel supports @@ -374,6 +400,7 @@ struct dma_slave_config { * should be checked by controller as well * @cmd_pause: true, if pause and thereby resume is supported * @cmd_terminate: true, if terminate cmd is supported + * @residue_granularity: granularity of the reported transfer residue */ struct dma_slave_caps { u32 src_addr_widths; @@ -381,6 +408,7 @@ struct dma_slave_caps { u32 directions; bool cmd_pause; bool cmd_terminate; + enum dma_residue_granularity residue_granularity; }; static inline const char *dma_chan_name(struct dma_chan *chan) |