diff options
-rw-r--r-- | arch/powerpc/boot/dts/mpc8308rdb.dts | 2 | ||||
-rw-r--r-- | arch/powerpc/boot/dts/p1022ds.dts | 4 | ||||
-rw-r--r-- | arch/powerpc/include/asm/immap_qe.h | 21 | ||||
-rw-r--r-- | arch/powerpc/include/asm/reg.h | 2 | ||||
-rw-r--r-- | arch/powerpc/include/asm/reg_booke.h | 14 | ||||
-rw-r--r-- | arch/powerpc/kernel/cpu_setup_fsl_booke.S | 6 | ||||
-rw-r--r-- | arch/powerpc/platforms/83xx/mpc83xx.h | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/83xx/usb.c | 21 | ||||
-rw-r--r-- | arch/powerpc/sysdev/fsl_rio.c | 2 |
9 files changed, 58 insertions, 16 deletions
diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index d3db02f98dd..a0bd1881081 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -109,7 +109,7 @@ #address-cells = <1>; #size-cells = <1>; device_type = "soc"; - compatible = "fsl,mpc8315-immr", "simple-bus"; + compatible = "fsl,mpc8308-immr", "simple-bus"; ranges = <0 0xe0000000 0x00100000>; reg = <0xe0000000 0x00000200>; bus-frequency = <0>; diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts index 2bbecbb4cbf..69422eb24d9 100644 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ b/arch/powerpc/boot/dts/p1022ds.dts @@ -291,13 +291,13 @@ ranges = <0x0 0xc100 0x200>; cell-index = <1>; dma00: dma-channel@0 { - compatible = "fsl,eloplus-dma-channel"; + compatible = "fsl,ssi-dma-channel"; reg = <0x0 0x80>; cell-index = <0>; interrupts = <76 2>; }; dma01: dma-channel@80 { - compatible = "fsl,eloplus-dma-channel"; + compatible = "fsl,ssi-dma-channel"; reg = <0x80 0x80>; cell-index = <1>; interrupts = <77 2>; diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 4e10f508570..0edb6842b13 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -467,13 +467,22 @@ struct qe_immap { extern struct qe_immap __iomem *qe_immr; extern phys_addr_t get_qe_base(void); -static inline unsigned long immrbar_virt_to_phys(void *address) +/* + * Returns the offset within the QE address space of the given pointer. + * + * Note that the QE does not support 36-bit physical addresses, so if + * get_qe_base() returns a number above 4GB, the caller will probably fail. + */ +static inline phys_addr_t immrbar_virt_to_phys(void *address) { - if ( ((u32)address >= (u32)qe_immr) && - ((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) ) - return (unsigned long)(address - (u32)qe_immr + - (u32)get_qe_base()); - return (unsigned long)virt_to_phys(address); + void *q = (void *)qe_immr; + + /* Is it a MURAM address? */ + if ((address >= q) && (address < (q + QE_IMMAP_SIZE))) + return get_qe_base() + (address - q); + + /* It's an address returned by kmalloc */ + return virt_to_phys(address); } #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index ff0005eec7d..125fc1ad665 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -283,6 +283,7 @@ #define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */ #define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */ +#ifdef CONFIG_6xx #define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */ #define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */ #define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */ @@ -292,6 +293,7 @@ #define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ #define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ #define HID1_PS (1<<16) /* 750FX PLL selection */ +#endif #define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ #define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 667a498eaee..e68c69bf741 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -246,6 +246,20 @@ store or cache line push */ #endif +/* Bit definitions for the HID1 */ +#ifdef CONFIG_E500 +/* e500v1/v2 */ +#define HID1_PLL_CFG_MASK 0xfc000000 /* PLL_CFG input pins */ +#define HID1_RFXE 0x00020000 /* Read fault exception enable */ +#define HID1_R1DPE 0x00008000 /* R1 data bus parity enable */ +#define HID1_R2DPE 0x00004000 /* R2 data bus parity enable */ +#define HID1_ASTME 0x00002000 /* Address bus streaming mode enable */ +#define HID1_ABE 0x00001000 /* Address broadcast enable */ +#define HID1_MPXTT 0x00000400 /* MPX re-map transfer type */ +#define HID1_ATS 0x00000080 /* Atomic status */ +#define HID1_MID_MASK 0x0000000f /* MID input pins */ +#endif + /* Bit definitions for the DBSR. */ /* * DBSR bits which have conflicting definitions on true Book E versus IBM 40x. diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S index 894e64fa481..5c518ad3445 100644 --- a/arch/powerpc/kernel/cpu_setup_fsl_booke.S +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -64,6 +64,12 @@ _GLOBAL(__setup_cpu_e500v2) bl __e500_icache_setup bl __e500_dcache_setup bl __setup_e500_ivors +#ifdef CONFIG_RAPIDIO + /* Ensure that RFXE is set */ + mfspr r3,SPRN_HID1 + oris r3,r3,HID1_RFXE@h + mtspr SPRN_HID1,r3 +#endif mtlr r4 blr _GLOBAL(__setup_cpu_e500mc) diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 0fea8811d45..82a434510d8 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -35,6 +35,8 @@ /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 +#define MPC8308_SICRH_USB_MASK 0x000c0000 +#define MPC8308_SICRH_USB_ULPI 0x00040000 #define MPC834X_SICRH_USB_UTMI 0x00020000 #define MPC831X_SICRH_USB_MASK 0x000000e0 #define MPC831X_SICRH_USB_ULPI 0x000000a0 diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c index 3ba4bb7d41b..2c64164722d 100644 --- a/arch/powerpc/platforms/83xx/usb.c +++ b/arch/powerpc/platforms/83xx/usb.c @@ -127,7 +127,8 @@ int mpc831x_usb_cfg(void) /* Configure clock */ immr_node = of_get_parent(np); - if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) + if (immr_node && (of_device_is_compatible(immr_node, "fsl,mpc8315-immr") || + of_device_is_compatible(immr_node, "fsl,mpc8308-immr"))) clrsetbits_be32(immap + MPC83XX_SCCR_OFFS, MPC8315_SCCR_USB_MASK, MPC8315_SCCR_USB_DRCM_01); @@ -138,7 +139,11 @@ int mpc831x_usb_cfg(void) /* Configure pin mux for ULPI. There is no pin mux for UTMI */ if (prop && !strcmp(prop, "ulpi")) { - if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + clrsetbits_be32(immap + MPC83XX_SICRH_OFFS, + MPC8308_SICRH_USB_MASK, + MPC8308_SICRH_USB_ULPI); + } else if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) { clrsetbits_be32(immap + MPC83XX_SICRL_OFFS, MPC8315_SICRL_USB_MASK, MPC8315_SICRL_USB_ULPI); @@ -173,6 +178,9 @@ int mpc831x_usb_cfg(void) !strcmp(prop, "utmi"))) { u32 refsel; + if (of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) + goto out; + if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) refsel = CONTROL_REFSEL_24MHZ; else @@ -186,9 +194,11 @@ int mpc831x_usb_cfg(void) temp = CONTROL_PHY_CLK_SEL_ULPI; #ifdef CONFIG_USB_OTG /* Set OTG_PORT */ - dr_mode = of_get_property(np, "dr_mode", NULL); - if (dr_mode && !strcmp(dr_mode, "otg")) - temp |= CONTROL_OTG_PORT; + if (!of_device_is_compatible(immr_node, "fsl,mpc8308-immr")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) + temp |= CONTROL_OTG_PORT; + } #endif /* CONFIG_USB_OTG */ out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp); } else { @@ -196,6 +206,7 @@ int mpc831x_usb_cfg(void) ret = -EINVAL; } +out: iounmap(usb_regs); of_node_put(np); return ret; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 9f99bef2ade..8c6cab01327 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1555,8 +1555,6 @@ int fsl_rio_setup(struct platform_device *dev) saved_mcheck_exception = ppc_md.machine_check_exception; ppc_md.machine_check_exception = fsl_rio_mcheck_exception; #endif - /* Ensure that RFXE is set */ - mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000)); return 0; err: |