diff options
23 files changed, 622 insertions, 688 deletions
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c index 42580757930..19cf5bf99f1 100644 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ b/arch/arm/mach-orion5x/d2net-setup.c @@ -267,28 +267,28 @@ static struct platform_device d2net_gpio_buttons = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Board ID (bit 0) */ - { 1, MPP_GPIO }, /* Board ID (bit 1) */ - { 2, MPP_GPIO }, /* Board ID (bit 2) */ - { 3, MPP_GPIO }, /* SATA 0 power */ - { 4, MPP_UNUSED }, - { 5, MPP_GPIO }, /* Fan fail detection */ - { 6, MPP_GPIO }, /* Red front LED */ - { 7, MPP_UNUSED }, - { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ - { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_GPIO }, /* SATA 1 power */ - { 13, MPP_UNUSED }, - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_GPIO }, /* Blue front LED blink control */ - { 17, MPP_UNUSED }, - { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ - { 19, MPP_UNUSED }, - { -1 } +static unsigned int d2net_mpp_modes[] __initdata = { + MPP0_GPIO, /* Board ID (bit 0) */ + MPP1_GPIO, /* Board ID (bit 1) */ + MPP2_GPIO, /* Board ID (bit 2) */ + MPP3_GPIO, /* SATA 0 power */ + MPP4_UNUSED, + MPP5_GPIO, /* Fan fail detection */ + MPP6_GPIO, /* Red front LED */ + MPP7_UNUSED, + MPP8_GPIO, /* Rear power switch (on|auto) */ + MPP9_GPIO, /* Rear power switch (auto|off) */ + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_GPIO, /* SATA 1 power */ + MPP13_UNUSED, + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_GPIO, /* Blue front LED blink control */ + MPP17_UNUSED, + MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ + MPP19_UNUSED, + 0, /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ /* 23: Blue front LED off */ /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index b7d4591214e..f95d3cb01cb 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -298,28 +298,28 @@ static struct i2c_board_info __initdata db88f5281_i2c_rtc = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode db88f5281_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* USB Over Current */ - { 1, MPP_GPIO }, /* USB Vbat input */ - { 2, MPP_PCI_ARB }, /* PCI_REQn[2] */ - { 3, MPP_PCI_ARB }, /* PCI_GNTn[2] */ - { 4, MPP_PCI_ARB }, /* PCI_REQn[3] */ - { 5, MPP_PCI_ARB }, /* PCI_GNTn[3] */ - { 6, MPP_GPIO }, /* JP0, CON17.2 */ - { 7, MPP_GPIO }, /* JP1, CON17.1 */ - { 8, MPP_GPIO }, /* JP2, CON11.2 */ - { 9, MPP_GPIO }, /* JP3, CON11.3 */ - { 10, MPP_GPIO }, /* RTC int */ - { 11, MPP_GPIO }, /* Baud Rate Generator */ - { 12, MPP_GPIO }, /* PCI int 1 */ - { 13, MPP_GPIO }, /* PCI int 2 */ - { 14, MPP_NAND }, /* NAND_REn[2] */ - { 15, MPP_NAND }, /* NAND_WEn[2] */ - { 16, MPP_UART }, /* UART1_RX */ - { 17, MPP_UART }, /* UART1_TX */ - { 18, MPP_UART }, /* UART1_CTSn */ - { 19, MPP_UART }, /* UART1_RTSn */ - { -1 }, +static unsigned int db88f5281_mpp_modes[] __initdata = { + MPP0_GPIO, /* USB Over Current */ + MPP1_GPIO, /* USB Vbat input */ + MPP2_PCI_ARB, /* PCI_REQn[2] */ + MPP3_PCI_ARB, /* PCI_GNTn[2] */ + MPP4_PCI_ARB, /* PCI_REQn[3] */ + MPP5_PCI_ARB, /* PCI_GNTn[3] */ + MPP6_GPIO, /* JP0, CON17.2 */ + MPP7_GPIO, /* JP1, CON17.1 */ + MPP8_GPIO, /* JP2, CON11.2 */ + MPP9_GPIO, /* JP3, CON11.3 */ + MPP10_GPIO, /* RTC int */ + MPP11_GPIO, /* Baud Rate Generator */ + MPP12_GPIO, /* PCI int 1 */ + MPP13_GPIO, /* PCI int 2 */ + MPP14_NAND, /* NAND_REn[2] */ + MPP15_NAND, /* NAND_WEn[2] */ + MPP16_UART, /* UART1_RX */ + MPP17_UART, /* UART1_TX */ + MPP18_UART, /* UART1_CTSn */ + MPP19_UART, /* UART1_RTSn */ + 0, }; static void __init db88f5281_init(void) diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 90ab022eabe..855e0e77d56 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -385,76 +385,76 @@ static struct mv_sata_platform_data dns323_sata_data = { /**************************************************************************** * General Setup */ -static struct orion5x_mpp_mode dns323a_mpp_modes[] __initdata = { - { 0, MPP_PCIE_RST_OUTn }, - { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ - { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_UNUSED }, - { 4, MPP_GPIO }, /* power button LED */ - { 5, MPP_GPIO }, /* power button LED */ - { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ - { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ - { 8, MPP_GPIO }, /* triggers power off */ - { 9, MPP_GPIO }, /* power button switch */ - { 10, MPP_GPIO }, /* reset button switch */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_UNUSED }, - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int dns323a_mpp_modes[] __initdata = { + MPP0_PCIE_RST_OUTn, + MPP1_GPIO, /* right amber LED (sata ch0) */ + MPP2_GPIO, /* left amber LED (sata ch1) */ + MPP3_UNUSED, + MPP4_GPIO, /* power button LED */ + MPP5_GPIO, /* power button LED */ + MPP6_GPIO, /* GMT G751-2f overtemp */ + MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ + MPP8_GPIO, /* triggers power off */ + MPP9_GPIO, /* power button switch */ + MPP10_GPIO, /* reset button switch */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_UNUSED, + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; -static struct orion5x_mpp_mode dns323b_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* right amber LED (sata ch0) */ - { 2, MPP_GPIO }, /* left amber LED (sata ch1) */ - { 3, MPP_GPIO }, /* system up flag */ - { 4, MPP_GPIO }, /* power button LED */ - { 5, MPP_GPIO }, /* power button LED */ - { 6, MPP_GPIO }, /* GMT G751-2f overtemp */ - { 7, MPP_GPIO }, /* M41T80 nIRQ/OUT/SQW */ - { 8, MPP_GPIO }, /* triggers power off */ - { 9, MPP_GPIO }, /* power button switch */ - { 10, MPP_GPIO }, /* reset button switch */ - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, - { 13, MPP_SATA_LED }, - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int dns323b_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* right amber LED (sata ch0) */ + MPP2_GPIO, /* left amber LED (sata ch1) */ + MPP3_GPIO, /* system up flag */ + MPP4_GPIO, /* power button LED */ + MPP5_GPIO, /* power button LED */ + MPP6_GPIO, /* GMT G751-2f overtemp */ + MPP7_GPIO, /* M41T80 nIRQ/OUT/SQW */ + MPP8_GPIO, /* triggers power off */ + MPP9_GPIO, /* power button switch */ + MPP10_GPIO, /* reset button switch */ + MPP11_UNUSED, + MPP12_SATA_LED, + MPP13_SATA_LED, + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; -static struct orion5x_mpp_mode dns323c_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* ? input */ - { 1, MPP_GPIO }, /* input power switch (0 = pressed) */ - { 2, MPP_GPIO }, /* output power off */ - { 3, MPP_UNUSED }, /* ? output */ - { 4, MPP_UNUSED }, /* ? output */ - { 5, MPP_UNUSED }, /* ? output */ - { 6, MPP_UNUSED }, /* ? output */ - { 7, MPP_UNUSED }, /* ? output */ - { 8, MPP_GPIO }, /* i/o right amber LED */ - { 9, MPP_GPIO }, /* i/o left amber LED */ - { 10, MPP_GPIO }, /* input */ - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, - { 13, MPP_SATA_LED }, - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* power button LED */ - { 18, MPP_GPIO }, /* fan speed bit 0 */ - { 19, MPP_GPIO }, /* fan speed bit 1 */ - { -1 }, +static unsigned int dns323c_mpp_modes[] __initdata = { + MPP0_GPIO, /* ? input */ + MPP1_GPIO, /* input power switch (0 = pressed) */ + MPP2_GPIO, /* output power off */ + MPP3_UNUSED, /* ? output */ + MPP4_UNUSED, /* ? output */ + MPP5_UNUSED, /* ? output */ + MPP6_UNUSED, /* ? output */ + MPP7_UNUSED, /* ? output */ + MPP8_GPIO, /* i/o right amber LED */ + MPP9_GPIO, /* i/o left amber LED */ + MPP10_GPIO, /* input */ + MPP11_UNUSED, + MPP12_SATA_LED, + MPP13_SATA_LED, + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_UNUSED, + MPP17_GPIO, /* power button LED */ + MPP18_GPIO, /* fan speed bit 0 */ + MPP19_GPIO, /* fan speed bit 1 */ + 0, }; /* Rev C1 Fan speed notes: diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index d037a90c216..b67cff0d4cf 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -180,31 +180,31 @@ static struct platform_device edmini_v2_gpio_buttons = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode edminiv2_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_UNUSED }, - { 3, MPP_GPIO }, /* RTC interrupt */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_UNUSED }, - { 7, MPP_UNUSED }, - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ +static unsigned int edminiv2_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_UNUSED, + MPP3_GPIO, /* RTC interrupt */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_UNUSED, + MPP7_UNUSED, + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ /* 16: Power LED control (0 = On, 1 = Off) */ - { 16, MPP_GPIO }, + MPP16_GPIO, /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - { 17, MPP_GPIO }, + MPP17_GPIO, /* 18: Power button status (0 = Released, 1 = Pressed) */ - { 18, MPP_GPIO }, - { 19, MPP_UNUSED }, - { -1 } + MPP18_GPIO, + MPP19_UNUSED, + 0, }; static void __init edmini_v2_init(void) diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 47497c76162..c0eb6462633 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -315,28 +315,28 @@ static void kurobox_pro_power_off(void) /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode kurobox_pro_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_GPIO }, /* GPIO Micon */ - { 3, MPP_GPIO }, /* GPIO Rtc */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_NAND }, /* NAND Flash REn */ - { 7, MPP_NAND }, /* NAND Flash WEn */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UART }, /* UART1 CTSn */ - { 19, MPP_UART }, /* UART1 RTSn */ - { -1 }, +static unsigned int kurobox_pro_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_GPIO, /* GPIO Micon */ + MPP3_GPIO, /* GPIO Rtc */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_NAND, /* NAND Flash REn */ + MPP7_NAND, /* NAND Flash WEn */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UART, /* UART1 CTSn */ + MPP19_UART, /* UART1 RTSn */ + 0, }; static void __init kurobox_pro_init(void) diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c index 6ae12aa6d75..5065803ca82 100644 --- a/arch/arm/mach-orion5x/ls-chl-setup.c +++ b/arch/arm/mach-orion5x/ls-chl-setup.c @@ -251,28 +251,28 @@ static struct platform_device lschl_fan_device = { * GPIO Data ****************************************************************************/ -static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED POWER */ - { 1, MPP_GPIO }, /* HDD POWER */ - { 2, MPP_GPIO }, /* LED ALARM */ - { 3, MPP_GPIO }, /* LED INFO */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_GPIO }, /* FAN LOCK */ - { 7, MPP_GPIO }, /* SW INIT */ - { 8, MPP_GPIO }, /* SW POWER */ - { 9, MPP_GPIO }, /* USB POWER */ - { 10, MPP_GPIO }, /* SW AUTO POWER */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* FAN HIGH */ - { 15, MPP_GPIO }, /* SW FUNC */ - { 16, MPP_GPIO }, /* FAN LOW */ - { 17, MPP_GPIO }, /* LED FUNC */ - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int lschl_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED POWER */ + MPP1_GPIO, /* HDD POWER */ + MPP2_GPIO, /* LED ALARM */ + MPP3_GPIO, /* LED INFO */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_GPIO, /* FAN LOCK */ + MPP7_GPIO, /* SW INIT */ + MPP8_GPIO, /* SW POWER */ + MPP9_GPIO, /* USB POWER */ + MPP10_GPIO, /* SW AUTO POWER */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_GPIO, /* FAN HIGH */ + MPP15_GPIO, /* SW FUNC */ + MPP16_GPIO, /* FAN LOW */ + MPP17_GPIO, /* LED FUNC */ + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init lschl_init(void) diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c index 7adafd79cf9..8503d0a42d4 100644 --- a/arch/arm/mach-orion5x/ls_hgl-setup.c +++ b/arch/arm/mach-orion5x/ls_hgl-setup.c @@ -200,28 +200,28 @@ static void ls_hgl_power_off(void) #define LS_HGL_GPIO_HDD_POWER 1 -static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED_PWR */ - { 1, MPP_GPIO }, /* HDD_PWR */ - { 2, MPP_GPIO }, /* LED_ALARM */ - { 3, MPP_GPIO }, /* LED_INFO */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_GPIO }, /* FAN_LCK */ - { 7, MPP_GPIO }, /* INIT */ - { 8, MPP_GPIO }, /* POWER */ - { 9, MPP_GPIO }, /* USB_PWR */ - { 10, MPP_GPIO }, /* AUTO_POWER */ - { 11, MPP_UNUSED }, /* LED_ETH (dummy) */ - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_GPIO }, /* FUNC */ - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* LED_FUNC */ - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int ls_hgl_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED_PWR */ + MPP1_GPIO, /* HDD_PWR */ + MPP2_GPIO, /* LED_ALARM */ + MPP3_GPIO, /* LED_INFO */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_GPIO, /* FAN_LCK */ + MPP7_GPIO, /* INIT */ + MPP8_GPIO, /* POWER */ + MPP9_GPIO, /* USB_PWR */ + MPP10_GPIO, /* AUTO_POWER */ + MPP11_UNUSED, /* LED_ETH (dummy) */ + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_GPIO, /* FUNC */ + MPP16_UNUSED, + MPP17_GPIO, /* LED_FUNC */ + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init ls_hgl_init(void) diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c index 869958f5c39..9c82723c05c 100644 --- a/arch/arm/mach-orion5x/lsmini-setup.c +++ b/arch/arm/mach-orion5x/lsmini-setup.c @@ -201,28 +201,28 @@ static void lsmini_power_off(void) #define LSMINI_GPIO_HDD_POWER0 1 #define LSMINI_GPIO_HDD_POWER1 19 -static struct orion5x_mpp_mode lsmini_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, /* LED_RESERVE1 (unused) */ - { 1, MPP_GPIO }, /* HDD_PWR */ - { 2, MPP_GPIO }, /* LED_ALARM */ - { 3, MPP_GPIO }, /* LED_INFO */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_UNUSED }, - { 7, MPP_UNUSED }, - { 8, MPP_UNUSED }, - { 9, MPP_GPIO }, /* LED_FUNC */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, /* LED_ETH (dummy) */ - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* LED_PWR */ - { 15, MPP_GPIO }, /* FUNC */ - { 16, MPP_GPIO }, /* USB_PWR */ - { 17, MPP_GPIO }, /* AUTO_POWER */ - { 18, MPP_GPIO }, /* POWER */ - { 19, MPP_GPIO }, /* HDD_PWR1 */ - { -1 }, +static unsigned int lsmini_mpp_modes[] __initdata = { + MPP0_UNUSED, /* LED_RESERVE1 (unused) */ + MPP1_GPIO, /* HDD_PWR */ + MPP2_GPIO, /* LED_ALARM */ + MPP3_GPIO, /* LED_INFO */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_UNUSED, + MPP7_UNUSED, + MPP8_UNUSED, + MPP9_GPIO, /* LED_FUNC */ + MPP10_UNUSED, + MPP11_UNUSED, /* LED_ETH (dummy) */ + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_GPIO, /* LED_PWR */ + MPP15_GPIO, /* FUNC */ + MPP16_GPIO, /* USB_PWR */ + MPP17_GPIO, /* AUTO_POWER */ + MPP18_GPIO, /* POWER */ + MPP19_GPIO, /* HDD_PWR1 */ + 0, }; static void __init lsmini_init(void) diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index 2288207726e..f12c41b98d4 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -12,154 +12,34 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/io.h> -#include <asm/gpio.h> #include <mach/hardware.h> -#include "common.h" +#include <plat/mpp.h> #include "mpp.h" +#include "common.h" -static int is_5181l(void) -{ - u32 dev; - u32 rev; - - orion5x_pcie_id(&dev, &rev); - - return !!(dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0); -} - -static int is_5182(void) +static unsigned int __init orion5x_variant(void) { u32 dev; u32 rev; orion5x_pcie_id(&dev, &rev); - return !!(dev == MV88F5182_DEV_ID); -} + if (dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) + return MPP_F5181_MASK; -static int is_5281(void) -{ - u32 dev; - u32 rev; + if (dev == MV88F5182_DEV_ID) + return MPP_F5182_MASK; - orion5x_pcie_id(&dev, &rev); + if (dev == MV88F5281_DEV_ID) + return MPP_F5281_MASK; - return !!(dev == MV88F5281_DEV_ID); + printk(KERN_ERR "MPP setup: unknown orion5x variant " + "(dev %#x rev %#x)\n", dev, rev); + return 0; } -static int __init determine_type_encoding(int mpp, enum orion5x_mpp_type type) +void __init orion5x_mpp_conf(unsigned int *mpp_list) { - switch (type) { - case MPP_UNUSED: - case MPP_GPIO: - if (mpp == 0) - return 3; - if (mpp >= 1 && mpp <= 15) - return 0; - if (mpp >= 16 && mpp <= 19) { - if (is_5182()) - return 5; - if (type == MPP_UNUSED) - return 0; - } - return -1; - - case MPP_PCIE_RST_OUTn: - if (mpp == 0) - return 0; - return -1; - - case MPP_PCI_ARB: - if (mpp >= 0 && mpp <= 7) - return 2; - return -1; - - case MPP_PCI_PMEn: - if (mpp == 2) - return 3; - return -1; - - case MPP_GIGE: - if (mpp >= 8 && mpp <= 19) - return 1; - return -1; - - case MPP_NAND: - if (is_5182() || is_5281()) { - if (mpp >= 4 && mpp <= 7) - return 4; - if (mpp >= 12 && mpp <= 17) - return 4; - } - return -1; - - case MPP_PCI_CLK: - if (is_5181l() && mpp >= 6 && mpp <= 7) - return 5; - return -1; - - case MPP_SATA_LED: - if (is_5182()) { - if (mpp >= 4 && mpp <= 7) - return 5; - if (mpp >= 12 && mpp <= 15) - return 5; - } - return -1; - - case MPP_UART: - if (mpp >= 16 && mpp <= 19) - return 0; - return -1; - } - - printk(KERN_INFO "unknown MPP type %d\n", type); - - return -1; -} - -void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode) -{ - u32 mpp_0_7_ctrl = readl(MPP_0_7_CTRL); - u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL); - u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL); - - for ( ; mode->mpp >= 0; mode++) { - u32 *reg; - int num_type; - int shift; - - if (mode->mpp >= 0 && mode->mpp <= 7) - reg = &mpp_0_7_ctrl; - else if (mode->mpp >= 8 && mode->mpp <= 15) - reg = &mpp_8_15_ctrl; - else if (mode->mpp >= 16 && mode->mpp <= 19) - reg = &mpp_16_19_ctrl; - else { - printk(KERN_ERR "orion5x_mpp_conf: invalid MPP " - "(%d)\n", mode->mpp); - continue; - } - - num_type = determine_type_encoding(mode->mpp, mode->type); - if (num_type < 0) { - printk(KERN_ERR "orion5x_mpp_conf: invalid MPP " - "combination (%d, %d)\n", mode->mpp, - mode->type); - continue; - } - - shift = (mode->mpp & 7) << 2; - *reg &= ~(0xf << shift); - *reg |= (num_type & 0xf) << shift; - - if (mode->type == MPP_UNUSED && (mode->mpp < 16 || is_5182())) - orion_gpio_set_unused(mode->mpp); - - orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO)); - } - - writel(mpp_0_7_ctrl, MPP_0_7_CTRL); - writel(mpp_8_15_ctrl, MPP_8_15_CTRL); - writel(mpp_16_19_ctrl, MPP_16_19_CTRL); + orion_mpp_conf(mpp_list, orion5x_variant(), + MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE); } diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h index 290e610dc01..eac68978a2c 100644 --- a/arch/arm/mach-orion5x/mpp.h +++ b/arch/arm/mach-orion5x/mpp.h @@ -1,74 +1,129 @@ #ifndef __ARCH_ORION5X_MPP_H #define __ARCH_ORION5X_MPP_H -enum orion5x_mpp_type { - /* - * This MPP is unused. - */ - MPP_UNUSED, - - /* - * This MPP pin is used as a generic GPIO pin. Valid for - * MPPs 0-15 and device bus data pins 16-31. On 5182, also - * valid for MPPs 16-19. - */ - MPP_GPIO, - - /* - * This MPP is used as PCIe_RST_OUTn pin. Valid for - * MPP 0 only. - */ - MPP_PCIE_RST_OUTn, - - /* - * This MPP is used as PCI arbiter pin (REQn/GNTn). - * Valid for MPPs 0-7 only. - */ - MPP_PCI_ARB, - - /* - * This MPP is used as PCI_PMEn pin. Valid for MPP 2 only. - */ - MPP_PCI_PMEn, - - /* - * This MPP is used as GigE half-duplex (COL, CRS) or GMII - * (RXERR, CRS, TXERR, TXD[7:4], RXD[7:4]) pin. Valid for - * MPPs 8-19 only. - */ - MPP_GIGE, - - /* - * This MPP is used as NAND REn/WEn pin. Valid for MPPs - * 4-7 and 12-17 only, and only on the 5181l/5182/5281. - */ - MPP_NAND, - - /* - * This MPP is used as a PCI clock output pin. Valid for - * MPPs 6-7 only, and only on the 5181l. - */ - MPP_PCI_CLK, - - /* - * This MPP is used as a SATA presence/activity LED. - * Valid for MPPs 4-7 and 12-15 only, and only on the 5182. - */ - MPP_SATA_LED, - - /* - * This MPP is used as UART1 RXD/TXD/CTSn/RTSn pin. - * Valid for MPPs 16-19 only. - */ - MPP_UART, -}; - -struct orion5x_mpp_mode { - int mpp; - enum orion5x_mpp_type type; -}; - -void orion5x_mpp_conf(struct orion5x_mpp_mode *mode); +#define MPP(_num, _sel, _in, _out, _F5181l, _F5182, _F5281) ( \ + /* MPP number */ ((_num) & 0xff) | \ + /* MPP select value */ (((_sel) & 0xf) << 8) | \ + /* may be input signal */ ((!!(_in)) << 12) | \ + /* may be output signal */ ((!!(_out)) << 13) | \ + /* available on F5181l */ ((!!(_F5181l)) << 14) | \ + /* available on F5182 */ ((!!(_F5182)) << 15) | \ + /* available on F5281 */ ((!!(_F5281)) << 16)) + /* num sel i o 5181 5182 5281 */ + +#define MPP_F5181_MASK MPP(0, 0x0, 0, 0, 1, 0, 0) +#define MPP_F5182_MASK MPP(0, 0x0, 0, 0, 0, 1, 0) +#define MPP_F5281_MASK MPP(0, 0x0, 0, 0, 0, 0, 1) + +#define MPP0_UNUSED MPP(0, 0x3, 0, 0, 1, 1, 1) +#define MPP0_GPIO MPP(0, 0x3, 1, 1, 1, 1, 1) +#define MPP0_PCIE_RST_OUTn MPP(0, 0x0, 0, 0, 1, 1, 1) +#define MPP0_PCI_ARB MPP(0, 0x2, 0, 0, 1, 1, 1) + +#define MPP1_UNUSED MPP(1, 0x0, 0, 0, 1, 1, 1) +#define MPP1_GPIO MPP(1, 0x0, 1, 1, 1, 1, 1) +#define MPP1_PCI_ARB MPP(1, 0x2, 0, 0, 1, 1, 1) + +#define MPP2_UNUSED MPP(2, 0x0, 0, 0, 1, 1, 1) +#define MPP2_GPIO MPP(2, 0x0, 1, 1, 1, 1, 1) +#define MPP2_PCI_ARB MPP(2, 0x2, 0, 0, 1, 1, 1) +#define MPP2_PCI_PMEn MPP(2, 0x3, 0, 0, 1, 1, 1) + +#define MPP3_UNUSED MPP(3, 0x0, 0, 0, 1, 1, 1) +#define MPP3_GPIO MPP(3, 0x0, 1, 1, 1, 1, 1) +#define MPP3_PCI_ARB MPP(3, 0x2, 0, 0, 1, 1, 1) + +#define MPP4_UNUSED MPP(4, 0x0, 0, 0, 1, 1, 1) +#define MPP4_GPIO MPP(4, 0x0, 1, 1, 1, 1, 1) +#define MPP4_PCI_ARB MPP(4, 0x2, 0, 0, 1, 1, 1) +#define MPP4_NAND MPP(4, 0x4, 0, 0, 0, 1, 1) +#define MPP4_SATA_LED MPP(4, 0x5, 0, 0, 0, 1, 0) + +#define MPP5_UNUSED MPP(5, 0x0, 0, 0, 1, 1, 1) +#define MPP5_GPIO MPP(5, 0x0, 1, 1, 1, 1, 1) +#define MPP5_PCI_ARB MPP(5, 0x2, 0, 0, 1, 1, 1) +#define MPP5_NAND MPP(5, 0x4, 0, 0, 0, 1, 1) +#define MPP5_SATA_LED MPP(5, 0x5, 0, 0, 0, 1, 0) + +#define MPP6_UNUSED MPP(6, 0x0, 0, 0, 1, 1, 1) +#define MPP6_GPIO MPP(6, 0x0, 1, 1, 1, 1, 1) +#define MPP6_PCI_ARB MPP(6, 0x2, 0, 0, 1, 1, 1) +#define MPP6_NAND MPP(6, 0x4, 0, 0, 0, 1, 1) +#define MPP6_PCI_CLK MPP(6, 0x5, 0, 0, 1, 0, 0) +#define MPP6_SATA_LED MPP(6, 0x5, 0, 0, 0, 1, 0) + +#define MPP7_UNUSED MPP(7, 0x0, 0, 0, 1, 1, 1) +#define MPP7_GPIO MPP(7, 0x0, 1, 1, 1, 1, 1) +#define MPP7_PCI_ARB MPP(7, 0x2, 0, 0, 1, 1, 1) +#define MPP7_NAND MPP(7, 0x4, 0, 0, 0, 1, 1) +#define MPP7_PCI_CLK MPP(7, 0x5, 0, 0, 1, 0, 0) +#define MPP7_SATA_LED MPP(7, 0x5, 0, 0, 0, 1, 0) + +#define MPP8_UNUSED MPP(8, 0x0, 0, 0, 1, 1, 1) +#define MPP8_GPIO MPP(8, 0x0, 1, 1, 1, 1, 1) +#define MPP8_GIGE MPP(8, 0x1, 0, 0, 1, 1, 1) + +#define MPP9_UNUSED MPP(9, 0x0, 0, 0, 1, 1, 1) +#define MPP9_GPIO MPP(9, 0x0, 0, 0, 1, 1, 1) +#define MPP9_GIGE MPP(9, 0x1, 1, 1, 1, 1, 1) + +#define MPP10_UNUSED MPP(10, 0x0, 0, 0, 1, 1, 1) +#define MPP10_GPIO MPP(10, 0x0, 1, 1, 1, 1, 1) +#define MPP10_GIGE MPP(10, 0x1, 0, 0, 1, 1, 1) + +#define MPP11_UNUSED MPP(11, 0x0, 0, 0, 1, 1, 1) +#define MPP11_GPIO MPP(11, 0x0, 1, 1, 1, 1, 1) +#define MPP11_GIGE MPP(11, 0x1, 0, 0, 1, 1, 1) + +#define MPP12_UNUSED MPP(12, 0x0, 0, 0, 1, 1, 1) +#define MPP12_GPIO MPP(12, 0x0, 1, 1, 1, 1, 1) +#define MPP12_GIGE MPP(12, 0x1, 0, 0, 1, 1, 1) +#define MPP12_NAND MPP(12, 0x4, 0, 0, 0, 1, 1) +#define MPP12_SATA_LED MPP(12, 0x5, 0, 0, 0, 1, 0) + +#define MPP13_UNUSED MPP(13, 0x0, 0, 0, 1, 1, 1) +#define MPP13_GPIO MPP(13, 0x0, 1, 1, 1, 1, 1) +#define MPP13_GIGE MPP(13, 0x1, 0, 0, 1, 1, 1) +#define MPP13_NAND MPP(13, 0x4, 0, 0, 0, 1, 1) +#define MPP13_SATA_LED MPP(13, 0x5, 0, 0, 0, 1, 0) + +#define MPP14_UNUSED MPP(14, 0x0, 0, 0, 1, 1, 1) +#define MPP14_GPIO MPP(14, 0x0, 1, 1, 1, 1, 1) +#define MPP14_GIGE MPP(14, 0x1, 0, 0, 1, 1, 1) +#define MPP14_NAND MPP(14, 0x4, 0, 0, 0, 1, 1) +#define MPP14_SATA_LED MPP(14, 0x5, 0, 0, 0, 1, 0) + +#define MPP15_UNUSED MPP(15, 0x0, 0, 0, 1, 1, 1) +#define MPP15_GPIO MPP(15, 0x0, 1, 1, 1, 1, 1) +#define MPP15_GIGE MPP(15, 0x1, 0, 0, 1, 1, 1) +#define MPP15_NAND MPP(15, 0x4, 0, 0, 0, 1, 1) +#define MPP15_SATA_LED MPP(15, 0x5, 0, 0, 0, 1, 0) + +#define MPP16_UNUSED MPP(16, 0x0, 0, 0, 1, 1, 1) +#define MPP16_GPIO MPP(16, 0x5, 1, 1, 0, 1, 0) +#define MPP16_GIGE MPP(16, 0x1, 0, 0, 1, 1, 1) +#define MPP16_NAND MPP(16, 0x4, 0, 0, 0, 1, 1) +#define MPP16_UART MPP(16, 0x0, 0, 0, 0, 1, 1) + +#define MPP17_UNUSED MPP(17, 0x0, 0, 0, 1, 1, 1) +#define MPP17_GPIO MPP(17, 0x5, 1, 1, 0, 1, 0) +#define MPP17_GIGE MPP(17, 0x1, 0, 0, 1, 1, 1) +#define MPP17_NAND MPP(17, 0x4, 0, 0, 0, 1, 1) +#define MPP17_UART MPP(17, 0x0, 0, 0, 0, 1, 1) + +#define MPP18_UNUSED MPP(18, 0x0, 0, 0, 1, 1, 1) +#define MPP18_GPIO MPP(18, 0x5, 1, 1, 0, 1, 0) +#define MPP18_GIGE MPP(18, 0x1, 0, 0, 1, 1, 1) +#define MPP18_UART MPP(18, 0x0, 0, 0, 0, 1, 1) + +#define MPP19_UNUSED MPP(19, 0x0, 0, 0, 1, 1, 1) +#define MPP19_GPIO MPP(19, 0x5, 1, 1, 0, 1, 0) +#define MPP19_GIGE MPP(19, 0x1, 0, 0, 1, 1, 1) +#define MPP19_UART MPP(19, 0x0, 0, 0, 0, 1, 1) + +#define MPP_MAX 19 + +void orion5x_mpp_conf(unsigned int *mpp_list); #endif diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index b43b208153c..59263b73d1e 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -193,28 +193,28 @@ static void mss2_power_off(void) /**************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode mss2_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Power LED */ - { 1, MPP_GPIO }, /* Error LED */ - { 2, MPP_UNUSED }, - { 3, MPP_GPIO }, /* RTC interrupt */ - { 4, MPP_GPIO }, /* HDD ind. (Single/Dual)*/ - { 5, MPP_GPIO }, /* HD0 5V control */ - { 6, MPP_GPIO }, /* HD0 12V control */ - { 7, MPP_GPIO }, /* HD1 5V control */ - { 8, MPP_GPIO }, /* HD1 12V control */ - { 9, MPP_UNUSED }, - { 10, MPP_GPIO }, /* Fan control */ - { 11, MPP_GPIO }, /* Power button */ - { 12, MPP_GPIO }, /* Reset button */ - { 13, MPP_UNUSED }, - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int mss2_mpp_modes[] __initdata = { + MPP0_GPIO, /* Power LED */ + MPP1_GPIO, /* Error LED */ + MPP2_UNUSED, + MPP3_GPIO, /* RTC interrupt */ + MPP4_GPIO, /* HDD ind. (Single/Dual)*/ + MPP5_GPIO, /* HD0 5V control */ + MPP6_GPIO, /* HD0 12V control */ + MPP7_GPIO, /* HD1 5V control */ + MPP8_GPIO, /* HD1 12V control */ + MPP9_UNUSED, + MPP10_GPIO, /* Fan control */ + MPP11_GPIO, /* Power button */ + MPP12_GPIO, /* Reset button */ + MPP13_UNUSED, + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init mss2_init(void) diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index c55d071707f..63ff10c3c46 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -108,28 +108,28 @@ static struct platform_device mv2120_button_device = { /**************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode mv2120_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Sys status LED */ - { 1, MPP_GPIO }, /* Sys error LED */ - { 2, MPP_GPIO }, /* OverTemp interrupt */ - { 3, MPP_GPIO }, /* RTC interrupt */ - { 4, MPP_GPIO }, /* V_LED 5V */ - { 5, MPP_GPIO }, /* V_LED 3.3V */ - { 6, MPP_UNUSED }, - { 7, MPP_UNUSED }, - { 8, MPP_GPIO }, /* SATA 0 fail LED */ - { 9, MPP_GPIO }, /* SATA 1 fail LED */ - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UNUSED }, - { 17, MPP_GPIO }, /* Reset button */ - { 18, MPP_GPIO }, /* Power button */ - { 19, MPP_GPIO }, /* Power off */ - { -1 }, +static unsigned int mv2120_mpp_modes[] __initdata = { + MPP0_GPIO, /* Sys status LED */ + MPP1_GPIO, /* Sys error LED */ + MPP2_GPIO, /* OverTemp interrupt */ + MPP3_GPIO, /* RTC interrupt */ + MPP4_GPIO, /* V_LED 5V */ + MPP5_GPIO, /* V_LED 3.3V */ + MPP6_UNUSED, + MPP7_UNUSED, + MPP8_GPIO, /* SATA 0 fail LED */ + MPP9_GPIO, /* SATA 1 fail LED */ + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_GPIO, /* Reset button */ + MPP18_GPIO, /* Power button */ + MPP19_GPIO, /* Power off */ + 0, }; static struct i2c_board_info __initdata mv2120_i2c_rtc = { diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c index a5930f83958..e43b39cc7fe 100644 --- a/arch/arm/mach-orion5x/net2big-setup.c +++ b/arch/arm/mach-orion5x/net2big-setup.c @@ -339,28 +339,28 @@ static struct platform_device net2big_gpio_buttons = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Raid mode (bit 0) */ - { 1, MPP_GPIO }, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ - { 2, MPP_GPIO }, /* Raid mode (bit 1) */ - { 3, MPP_GPIO }, /* Board ID (bit 0) */ - { 4, MPP_GPIO }, /* Fan activity (0 = Off, 1 = On) */ - { 5, MPP_GPIO }, /* Fan fail detection */ - { 6, MPP_GPIO }, /* Red front LED (0 = Off, 1 = On) */ - { 7, MPP_GPIO }, /* Disable initial blinking on front LED */ - { 8, MPP_GPIO }, /* Rear power switch (on|auto) */ - { 9, MPP_GPIO }, /* Rear power switch (auto|off) */ - { 10, MPP_GPIO }, /* SATA 1 red LED (0 = Off, 1 = On) */ - { 11, MPP_GPIO }, /* SATA 0 red LED (0 = Off, 1 = On) */ - { 12, MPP_GPIO }, /* Board ID (bit 1) */ - { 13, MPP_GPIO }, /* SATA 1 blue LED blink control */ - { 14, MPP_SATA_LED }, - { 15, MPP_SATA_LED }, - { 16, MPP_GPIO }, /* Blue front LED control */ - { 17, MPP_GPIO }, /* SATA 0 blue LED blink control */ - { 18, MPP_GPIO }, /* Front button (0 = Released, 1 = Pushed ) */ - { 19, MPP_GPIO }, /* SATA{0,1} power On/Off request */ - { -1 } +static unsigned int net2big_mpp_modes[] __initdata = { + MPP0_GPIO, /* Raid mode (bit 0) */ + MPP1_GPIO, /* USB port 2 fuse (0 = Fail, 1 = Ok) */ + MPP2_GPIO, /* Raid mode (bit 1) */ + MPP3_GPIO, /* Board ID (bit 0) */ + MPP4_GPIO, /* Fan activity (0 = Off, 1 = On) */ + MPP5_GPIO, /* Fan fail detection */ + MPP6_GPIO, /* Red front LED (0 = Off, 1 = On) */ + MPP7_GPIO, /* Disable initial blinking on front LED */ + MPP8_GPIO, /* Rear power switch (on|auto) */ + MPP9_GPIO, /* Rear power switch (auto|off) */ + MPP10_GPIO, /* SATA 1 red LED (0 = Off, 1 = On) */ + MPP11_GPIO, /* SATA 0 red LED (0 = Off, 1 = On) */ + MPP12_GPIO, /* Board ID (bit 1) */ + MPP13_GPIO, /* SATA 1 blue LED blink control */ + MPP14_SATA_LED, + MPP15_SATA_LED, + MPP16_GPIO, /* Blue front LED control */ + MPP17_GPIO, /* SATA 0 blue LED blink control */ + MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ + MPP19_GPIO, /* SATA{0,1} power On/Off request */ + 0, /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ /* 23: SATA 0 power status */ /* 24: Board power off */ diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 34310ab56e2..9eec7c2375e 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -64,28 +64,28 @@ static struct platform_device rd88f5181l_fxo_nor_boot_flash = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED1 CardBus LED (front panel) */ - { 1, MPP_GPIO }, /* PCI_intA */ - { 2, MPP_GPIO }, /* Hard Reset / Factory Init*/ - { 3, MPP_GPIO }, /* FXS or DAA select */ - { 4, MPP_GPIO }, /* LED6 - phone LED (front panel) */ - { 5, MPP_GPIO }, /* LED5 - phone LED (front panel) */ - { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ - { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ - { 8, MPP_GPIO }, /* CardBus reset */ - { 9, MPP_GPIO }, /* GE_RXERR */ - { 10, MPP_GPIO }, /* LED2 MiniPCI LED (front panel) */ - { 11, MPP_GPIO }, /* Lifeline control */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED1 CardBus LED (front panel) */ + MPP1_GPIO, /* PCI_intA */ + MPP2_GPIO, /* Hard Reset / Factory Init*/ + MPP3_GPIO, /* FXS or DAA select */ + MPP4_GPIO, /* LED6 - phone LED (front panel) */ + MPP5_GPIO, /* LED5 - phone LED (front panel) */ + MPP6_PCI_CLK, /* CPU PCI refclk */ + MPP7_PCI_CLK, /* PCI/PCIe refclk */ + MPP8_GPIO, /* CardBus reset */ + MPP9_GPIO, /* GE_RXERR */ + MPP10_GPIO, /* LED2 MiniPCI LED (front panel) */ + MPP11_GPIO, /* Lifeline control */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index c1f79fa014e..0cc90bbfd32 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -65,28 +65,28 @@ static struct platform_device rd88f5181l_ge_nor_boot_flash = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* LED1 */ - { 1, MPP_GPIO }, /* LED5 */ - { 2, MPP_GPIO }, /* LED4 */ - { 3, MPP_GPIO }, /* LED3 */ - { 4, MPP_GPIO }, /* PCI_intA */ - { 5, MPP_GPIO }, /* RTC interrupt */ - { 6, MPP_PCI_CLK }, /* CPU PCI refclk */ - { 7, MPP_PCI_CLK }, /* PCI/PCIe refclk */ - { 8, MPP_GPIO }, /* 88e6131 interrupt */ - { 9, MPP_GPIO }, /* GE_RXERR */ - { 10, MPP_GPIO }, /* PCI_intB */ - { 11, MPP_GPIO }, /* LED2 */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = { + MPP0_GPIO, /* LED1 */ + MPP1_GPIO, /* LED5 */ + MPP2_GPIO, /* LED4 */ + MPP3_GPIO, /* LED3 */ + MPP4_GPIO, /* PCI_intA */ + MPP5_GPIO, /* RTC interrupt */ + MPP6_PCI_CLK, /* CPU PCI refclk */ + MPP7_PCI_CLK, /* PCI/PCIe refclk */ + MPP8_GPIO, /* 88e6131 interrupt */ + MPP9_GPIO, /* GE_RXERR */ + MPP10_GPIO, /* PCI_intB */ + MPP11_GPIO, /* LED2 */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 4fc46772a08..48da39b9bdb 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -241,28 +241,28 @@ static struct mv_sata_platform_data rd88f5182_sata_data = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode rd88f5182_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Debug Led */ - { 1, MPP_GPIO }, /* Reset Switch */ - { 2, MPP_UNUSED }, - { 3, MPP_GPIO }, /* RTC Int */ - { 4, MPP_GPIO }, - { 5, MPP_GPIO }, - { 6, MPP_GPIO }, /* PCI_intA */ - { 7, MPP_GPIO }, /* PCI_intB */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UNUSED }, - { 17, MPP_UNUSED }, - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int rd88f5182_mpp_modes[] __initdata = { + MPP0_GPIO, /* Debug Led */ + MPP1_GPIO, /* Reset Switch */ + MPP2_UNUSED, + MPP3_GPIO, /* RTC Int */ + MPP4_GPIO, + MPP5_GPIO, + MPP6_GPIO, /* PCI_intA */ + MPP7_GPIO, /* PCI_intB */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UNUSED, + MPP17_UNUSED, + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init rd88f5182_init(void) diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index b080c6966d1..ad2eba9286a 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -27,7 +27,6 @@ #include <asm/mach/pci.h> #include <mach/orion5x.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { .phy_addr = -1, diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 61600414391..29ce826c3c2 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -295,28 +295,28 @@ static void tsp2_power_off(void) /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode tsp2_mpp_modes[] __initdata = { - { 0, MPP_PCIE_RST_OUTn }, - { 1, MPP_UNUSED }, - { 2, MPP_UNUSED }, - { 3, MPP_UNUSED }, - { 4, MPP_NAND }, /* BOOT NAND Flash REn */ - { 5, MPP_NAND }, /* BOOT NAND Flash WEn */ - { 6, MPP_NAND }, /* BOOT NAND Flash HREn[0] */ - { 7, MPP_NAND }, /* BOOT NAND Flash WEn[0] */ - { 8, MPP_GPIO }, /* MICON int */ - { 9, MPP_GPIO }, /* RTC int */ - { 10, MPP_UNUSED }, - { 11, MPP_GPIO }, /* PCI Int A */ - { 12, MPP_UNUSED }, - { 13, MPP_GPIO }, /* UPS on UART0 enable */ - { 14, MPP_GPIO }, /* UPS low battery detection */ - { 15, MPP_UNUSED }, - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UART }, /* UART1 CTSn */ - { 19, MPP_UART }, /* UART1 RTSn */ - { -1 }, +static unsigned int tsp2_mpp_modes[] __initdata = { + MPP0_PCIE_RST_OUTn, + MPP1_UNUSED, + MPP2_UNUSED, + MPP3_UNUSED, + MPP4_NAND, /* BOOT NAND Flash REn */ + MPP5_NAND, /* BOOT NAND Flash WEn */ + MPP6_NAND, /* BOOT NAND Flash HREn[0] */ + MPP7_NAND, /* BOOT NAND Flash WEn[0] */ + MPP8_GPIO, /* MICON int */ + MPP9_GPIO, /* RTC int */ + MPP10_UNUSED, + MPP11_GPIO, /* PCI Int A */ + MPP12_UNUSED, + MPP13_GPIO, /* UPS on UART0 enable */ + MPP14_GPIO, /* UPS low battery detection */ + MPP15_UNUSED, + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UART, /* UART1 CTSn */ + MPP19_UART, /* UART1 RTSn */ + 0, }; static void __init tsp2_init(void) diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index e6d64494d3d..47162fd5f04 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -244,28 +244,28 @@ static struct mv_sata_platform_data qnap_ts209_sata_data = { * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode ts209_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* USB copy button */ - { 2, MPP_GPIO }, /* Load defaults button */ - { 3, MPP_GPIO }, /* GPIO RTC */ - { 4, MPP_UNUSED }, - { 5, MPP_UNUSED }, - { 6, MPP_GPIO }, /* PCI Int A */ - { 7, MPP_GPIO }, /* PCI Int B */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_SATA_LED }, /* SATA 0 presence */ - { 13, MPP_SATA_LED }, /* SATA 1 presence */ - { 14, MPP_SATA_LED }, /* SATA 0 active */ - { 15, MPP_SATA_LED }, /* SATA 1 active */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_GPIO }, /* SW_RST */ - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int ts209_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* USB copy button */ + MPP2_GPIO, /* Load defaults button */ + MPP3_GPIO, /* GPIO RTC */ + MPP4_UNUSED, + MPP5_UNUSED, + MPP6_GPIO, /* PCI Int A */ + MPP7_GPIO, /* PCI Int B */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_SATA_LED, /* SATA 0 presence */ + MPP13_SATA_LED, /* SATA 1 presence */ + MPP14_SATA_LED, /* SATA 0 active */ + MPP15_SATA_LED, /* SATA 1 active */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_GPIO, /* SW_RST */ + MPP19_UNUSED, + 0, }; static void __init qnap_ts209_init(void) diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 9eac8192d92..5aacc7ac5cf 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -242,28 +242,28 @@ static struct platform_device qnap_ts409_button_device = { /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode ts409_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_UNUSED }, - { 2, MPP_UNUSED }, - { 3, MPP_UNUSED }, - { 4, MPP_GPIO }, /* HDD 1 status */ - { 5, MPP_GPIO }, /* HDD 2 status */ - { 6, MPP_GPIO }, /* HDD 3 status */ - { 7, MPP_GPIO }, /* HDD 4 status */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_GPIO }, /* RTC int */ - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_GPIO }, /* SW_RST */ - { 15, MPP_GPIO }, /* USB copy button */ - { 16, MPP_UART }, /* UART1 RXD */ - { 17, MPP_UART }, /* UART1 TXD */ - { 18, MPP_UNUSED }, - { 19, MPP_UNUSED }, - { -1 }, +static unsigned int ts409_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_UNUSED, + MPP2_UNUSED, + MPP3_UNUSED, + MPP4_GPIO, /* HDD 1 status */ + MPP5_GPIO, /* HDD 2 status */ + MPP6_GPIO, /* HDD 3 status */ + MPP7_GPIO, /* HDD 4 status */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_GPIO, /* RTC int */ + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_GPIO, /* SW_RST */ + MPP15_GPIO, /* USB copy button */ + MPP16_UART, /* UART1 RXD */ + MPP17_UART, /* UART1 TXD */ + MPP18_UNUSED, + MPP19_UNUSED, + 0, }; static void __init qnap_ts409_init(void) diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index edb1dd2d161..6b7b54116f3 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -557,27 +557,27 @@ static struct kobj_attribute ts78xx_fpga_attr = /***************************************************************************** * General Setup ****************************************************************************/ -static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { - { 0, MPP_UNUSED }, - { 1, MPP_GPIO }, /* JTAG Clock */ - { 2, MPP_GPIO }, /* JTAG Data In */ - { 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */ - { 4, MPP_GPIO }, /* JTAG Data Out */ - { 5, MPP_GPIO }, /* JTAG TMS */ - { 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ - { 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */ - { 8, MPP_UNUSED }, - { 9, MPP_UNUSED }, - { 10, MPP_UNUSED }, - { 11, MPP_UNUSED }, - { 12, MPP_UNUSED }, - { 13, MPP_UNUSED }, - { 14, MPP_UNUSED }, - { 15, MPP_UNUSED }, - { 16, MPP_UART }, - { 17, MPP_UART }, - { 18, MPP_UART }, - { 19, MPP_UART }, +static unsigned int ts78xx_mpp_modes[] __initdata = { + MPP0_UNUSED, + MPP1_GPIO, /* JTAG Clock */ + MPP2_GPIO, /* JTAG Data In */ + MPP3_GPIO, /* Lat ECP2 256 FPGA - PB2B */ + MPP4_GPIO, /* JTAG Data Out */ + MPP5_GPIO, /* JTAG TMS */ + MPP6_GPIO, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */ + MPP7_GPIO, /* Lat ECP2 256 FPGA - PB22B */ + MPP8_UNUSED, + MPP9_UNUSED, + MPP10_UNUSED, + MPP11_UNUSED, + MPP12_UNUSED, + MPP13_UNUSED, + MPP14_UNUSED, + MPP15_UNUSED, + MPP16_UART, + MPP17_UART, + MPP18_UART, + MPP19_UART, /* * MPP[20] PCI Clock Out 1 * MPP[21] PCI Clock Out 0 @@ -586,7 +586,7 @@ static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = { * MPP[24] Unused * MPP[25] Unused */ - { -1 }, + 0, }; static void __init ts78xx_init(void) diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 4e5216be074..444a1c7fdfd 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -24,28 +24,28 @@ #include "common.h" #include "mpp.h" -static struct orion5x_mpp_mode wnr854t_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Power LED green (0=on) */ - { 1, MPP_GPIO }, /* Reset Button (0=off) */ - { 2, MPP_GPIO }, /* Power LED blink (0=off) */ - { 3, MPP_GPIO }, /* WAN Status LED amber (0=off) */ - { 4, MPP_GPIO }, /* PCI int */ - { 5, MPP_GPIO }, /* ??? */ - { 6, MPP_GPIO }, /* ??? */ - { 7, MPP_GPIO }, /* ??? */ - { 8, MPP_UNUSED }, /* ??? */ - { 9, MPP_GIGE }, /* GE_RXERR */ - { 10, MPP_UNUSED }, /* ??? */ - { 11, MPP_UNUSED }, /* ??? */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int wnr854t_mpp_modes[] __initdata = { + MPP0_GPIO, /* Power LED green (0=on) */ + MPP1_GPIO, /* Reset Button (0=off) */ + MPP2_GPIO, /* Power LED blink (0=off) */ + MPP3_GPIO, /* WAN Status LED amber (0=off) */ + MPP4_GPIO, /* PCI int */ + MPP5_GPIO, /* ??? */ + MPP6_GPIO, /* ??? */ + MPP7_GPIO, /* ??? */ + MPP8_UNUSED, /* ??? */ + MPP9_GIGE, /* GE_RXERR */ + MPP10_UNUSED, /* ??? */ + MPP11_UNUSED, /* ??? */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; /* diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index fab79d09cc5..d1952be0ae1 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -101,28 +101,28 @@ static struct platform_device wrt350n_v2_button_device = { /* * General setup */ -static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = { - { 0, MPP_GPIO }, /* Power LED green (0=on) */ - { 1, MPP_GPIO }, /* Security LED (0=on) */ - { 2, MPP_GPIO }, /* Internal Button (0=on) */ - { 3, MPP_GPIO }, /* Reset Button (0=on) */ - { 4, MPP_GPIO }, /* PCI int */ - { 5, MPP_GPIO }, /* Power LED orange (0=on) */ - { 6, MPP_GPIO }, /* USB LED (0=on) */ - { 7, MPP_GPIO }, /* Wireless LED (0=on) */ - { 8, MPP_UNUSED }, /* ??? */ - { 9, MPP_GIGE }, /* GE_RXERR */ - { 10, MPP_UNUSED }, /* ??? */ - { 11, MPP_UNUSED }, /* ??? */ - { 12, MPP_GIGE }, /* GE_TXD[4] */ - { 13, MPP_GIGE }, /* GE_TXD[5] */ - { 14, MPP_GIGE }, /* GE_TXD[6] */ - { 15, MPP_GIGE }, /* GE_TXD[7] */ - { 16, MPP_GIGE }, /* GE_RXD[4] */ - { 17, MPP_GIGE }, /* GE_RXD[5] */ - { 18, MPP_GIGE }, /* GE_RXD[6] */ - { 19, MPP_GIGE }, /* GE_RXD[7] */ - { -1 }, +static unsigned int wrt350n_v2_mpp_modes[] __initdata = { + MPP0_GPIO, /* Power LED green (0=on) */ + MPP1_GPIO, /* Security LED (0=on) */ + MPP2_GPIO, /* Internal Button (0=on) */ + MPP3_GPIO, /* Reset Button (0=on) */ + MPP4_GPIO, /* PCI int */ + MPP5_GPIO, /* Power LED orange (0=on) */ + MPP6_GPIO, /* USB LED (0=on) */ + MPP7_GPIO, /* Wireless LED (0=on) */ + MPP8_UNUSED, /* ??? */ + MPP9_GIGE, /* GE_RXERR */ + MPP10_UNUSED, /* ??? */ + MPP11_UNUSED, /* ??? */ + MPP12_GIGE, /* GE_TXD[4] */ + MPP13_GIGE, /* GE_TXD[5] */ + MPP14_GIGE, /* GE_TXD[6] */ + MPP15_GIGE, /* GE_TXD[7] */ + MPP16_GIGE, /* GE_RXD[4] */ + MPP17_GIGE, /* GE_RXD[5] */ + MPP18_GIGE, /* GE_RXD[6] */ + MPP19_GIGE, /* GE_RXD[7] */ + 0, }; /* |