diff options
| -rw-r--r-- | drivers/scsi/ufs/ufs.h | 36 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pci.c | 45 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd-pltfrm.c | 60 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.c | 945 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshcd.h | 76 | ||||
| -rw-r--r-- | drivers/scsi/ufs/ufshci.h | 9 |
6 files changed, 989 insertions, 182 deletions
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h index 37d64c1fb8d..42c459a9d3f 100644 --- a/drivers/scsi/ufs/ufs.h +++ b/drivers/scsi/ufs/ufs.h @@ -129,6 +129,7 @@ enum { /* Flag idn for Query Requests*/ enum flag_idn { QUERY_FLAG_IDN_FDEVICEINIT = 0x01, + QUERY_FLAG_IDN_PWR_ON_WPE = 0x03, QUERY_FLAG_IDN_BKOPS_EN = 0x04, }; @@ -194,6 +195,18 @@ enum unit_desc_param { UNIT_DESC_PARAM_LARGE_UNIT_SIZE_M1 = 0x22, }; +/* + * Logical Unit Write Protect + * 00h: LU not write protected + * 01h: LU write protected when fPowerOnWPEn =1 + * 02h: LU permanently write protected when fPermanentWPEn =1 + */ +enum ufs_lu_wp_type { + UFS_LU_NO_WP = 0x00, + UFS_LU_POWER_ON_WP = 0x01, + UFS_LU_PERM_WP = 0x02, +}; + /* bActiveICCLevel parameter current units */ enum { UFSHCD_NANO_AMP = 0, @@ -226,11 +239,12 @@ enum { }; /* Background operation status */ -enum { +enum bkops_status { BKOPS_STATUS_NO_OP = 0x0, BKOPS_STATUS_NON_CRITICAL = 0x1, BKOPS_STATUS_PERF_IMPACT = 0x2, BKOPS_STATUS_CRITICAL = 0x3, + BKOPS_STATUS_MAX = BKOPS_STATUS_CRITICAL, }; /* UTP QUERY Transaction Specific Fields OpCode */ @@ -291,6 +305,14 @@ enum { UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05, UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09, }; + +/* UFS device power modes */ +enum ufs_dev_pwr_mode { + UFS_ACTIVE_PWR_MODE = 1, + UFS_SLEEP_PWR_MODE = 2, + UFS_POWERDOWN_PWR_MODE = 3, +}; + /** * struct utp_upiu_header - UPIU header structure * @dword_0: UPIU header DW-0 @@ -437,6 +459,12 @@ struct ufs_query_res { #define UFS_VREG_VCCQ2_MIN_UV 1650000 /* uV */ #define UFS_VREG_VCCQ2_MAX_UV 1950000 /* uV */ +/* + * VCCQ & VCCQ2 current requirement when UFS device is in sleep state + * and link is in Hibern8 state. + */ +#define UFS_VREG_LPM_LOAD_UA 1000 /* uA */ + struct ufs_vreg { struct regulator *reg; const char *name; @@ -454,4 +482,10 @@ struct ufs_vreg_info { struct ufs_vreg *vdd_hba; }; +struct ufs_dev_info { + bool f_power_on_wp_en; + /* Keeps information if any of the LU is power on write protected */ + bool is_lu_power_on_wp; +}; + #endif /* End of Header */ diff --git a/drivers/scsi/ufs/ufshcd-pci.c b/drivers/scsi/ufs/ufshcd-pci.c index 2a26faa95b7..955ed558701 100644 --- a/drivers/scsi/ufs/ufshcd-pci.c +++ b/drivers/scsi/ufs/ufshcd-pci.c @@ -43,34 +43,24 @@ * @pdev: pointer to PCI device handle * @state: power state * - * Returns -ENOSYS + * Returns 0 if successful + * Returns non-zero otherwise */ static int ufshcd_pci_suspend(struct device *dev) { - /* - * TODO: - * 1. Call ufshcd_suspend - * 2. Do bus specific power management - */ - - return -ENOSYS; + return ufshcd_system_suspend(dev_get_drvdata(dev)); } /** * ufshcd_pci_resume - resume power management function * @pdev: pointer to PCI device handle * - * Returns -ENOSYS + * Returns 0 if successful + * Returns non-zero otherwise */ static int ufshcd_pci_resume(struct device *dev) { - /* - * TODO: - * 1. Call ufshcd_resume. - * 2. Do bus specific wake up - */ - - return -ENOSYS; + return ufshcd_system_resume(dev_get_drvdata(dev)); } #else #define ufshcd_pci_suspend NULL @@ -80,30 +70,15 @@ static int ufshcd_pci_resume(struct device *dev) #ifdef CONFIG_PM_RUNTIME static int ufshcd_pci_runtime_suspend(struct device *dev) { - struct ufs_hba *hba = dev_get_drvdata(dev); - - if (!hba) - return 0; - - return ufshcd_runtime_suspend(hba); + return ufshcd_runtime_suspend(dev_get_drvdata(dev)); } static int ufshcd_pci_runtime_resume(struct device *dev) { - struct ufs_hba *hba = dev_get_drvdata(dev); - - if (!hba) - return 0; - - return ufshcd_runtime_resume(hba); + return ufshcd_runtime_resume(dev_get_drvdata(dev)); } static int ufshcd_pci_runtime_idle(struct device *dev) { - struct ufs_hba *hba = dev_get_drvdata(dev); - - if (!hba) - return 0; - - return ufshcd_runtime_idle(hba); + return ufshcd_runtime_idle(dev_get_drvdata(dev)); } #else /* !CONFIG_PM_RUNTIME */ #define ufshcd_pci_runtime_suspend NULL @@ -117,7 +92,7 @@ static int ufshcd_pci_runtime_idle(struct device *dev) */ static void ufshcd_pci_shutdown(struct pci_dev *pdev) { - ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev)); + ufshcd_shutdown((struct ufs_hba *)pci_get_drvdata(pdev)); } /** diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c index dde4e6e3be7..2482bbac368 100644 --- a/drivers/scsi/ufs/ufshcd-pltfrm.c +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c @@ -225,45 +225,24 @@ out: * ufshcd_pltfrm_suspend - suspend power management function * @dev: pointer to device handle * - * - * Returns 0 + * Returns 0 if successful + * Returns non-zero otherwise */ static int ufshcd_pltfrm_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ufs_hba *hba = platform_get_drvdata(pdev); - - /* - * TODO: - * 1. Call ufshcd_suspend - * 2. Do bus specific power management - */ - - disable_irq(hba->irq); - - return 0; + return ufshcd_system_suspend(dev_get_drvdata(dev)); } /** * ufshcd_pltfrm_resume - resume power management function * @dev: pointer to device handle * - * Returns 0 + * Returns 0 if successful + * Returns non-zero otherwise */ static int ufshcd_pltfrm_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ufs_hba *hba = platform_get_drvdata(pdev); - - /* - * TODO: - * 1. Call ufshcd_resume. - * 2. Do bus specific wake up - */ - - enable_irq(hba->irq); - - return 0; + return ufshcd_system_resume(dev_get_drvdata(dev)); } #else #define ufshcd_pltfrm_suspend NULL @@ -273,30 +252,15 @@ static int ufshcd_pltfrm_resume(struct device *dev) #ifdef CONFIG_PM_RUNTIME static int ufshcd_pltfrm_runtime_suspend(struct device *dev) { - struct ufs_hba *hba = dev_get_drvdata(dev); - - if (!hba) - return 0; - - return ufshcd_runtime_suspend(hba); + return ufshcd_runtime_suspend(dev_get_drvdata(dev)); } static int ufshcd_pltfrm_runtime_resume(struct device *dev) { - struct ufs_hba *hba = dev_get_drvdata(dev); - - if (!hba) - return 0; - - return ufshcd_runtime_resume(hba); + return ufshcd_runtime_resume(dev_get_drvdata(dev)); } static int ufshcd_pltfrm_runtime_idle(struct device *dev) { - struct ufs_hba *hba = dev_get_drvdata(dev); - - if (!hba) - return 0; - - return ufshcd_runtime_idle(hba); + return ufshcd_runtime_idle(dev_get_drvdata(dev)); } #else /* !CONFIG_PM_RUNTIME */ #define ufshcd_pltfrm_runtime_suspend NULL @@ -304,6 +268,11 @@ static int ufshcd_pltfrm_runtime_idle(struct device *dev) #define ufshcd_pltfrm_runtime_idle NULL #endif /* CONFIG_PM_RUNTIME */ +static void ufshcd_pltfrm_shutdown(struct platform_device *pdev) +{ + ufshcd_shutdown((struct ufs_hba *)platform_get_drvdata(pdev)); +} + /** * ufshcd_pltfrm_probe - probe routine of the driver * @pdev: pointer to Platform device handle @@ -404,6 +373,7 @@ static const struct dev_pm_ops ufshcd_dev_pm_ops = { static struct platform_driver ufshcd_pltfrm_driver = { .probe = ufshcd_pltfrm_probe, .remove = ufshcd_pltfrm_remove, + .shutdown = ufshcd_pltfrm_shutdown, .driver = { .name = "ufshcd", .owner = THIS_MODULE, diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index a1eae495fa6..f2b50bc13ac 100644 --- a/drivers/scsi/ufs/ufshcd.c +++ b/drivers/scsi/ufs/ufshcd.c @@ -44,7 +44,6 @@ #define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ UTP_TASK_REQ_COMPL |\ - UIC_POWER_MODE |\ UFSHCD_ERROR_MASK) /* UIC command timeout, unit: ms */ #define UIC_CMD_TIMEOUT 500 @@ -138,12 +137,72 @@ enum { #define ufshcd_clear_eh_in_progress(h) \ (h->eh_flags &= ~UFSHCD_EH_IN_PROGRESS) +#define ufshcd_set_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE) +#define ufshcd_set_ufs_dev_sleep(h) \ + ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE) +#define ufshcd_set_ufs_dev_poweroff(h) \ + ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE) +#define ufshcd_is_ufs_dev_active(h) \ + ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE) +#define ufshcd_is_ufs_dev_sleep(h) \ + ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE) +#define ufshcd_is_ufs_dev_poweroff(h) \ + ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE) + +static struct ufs_pm_lvl_states ufs_pm_lvl_states[] = { + {UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE}, + {UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + {UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE}, + {UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + {UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE}, + {UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE}, +}; + +static inline enum ufs_dev_pwr_mode +ufs_get_pm_lvl_to_dev_pwr_mode(enum ufs_pm_level lvl) +{ + return ufs_pm_lvl_states[lvl].dev_state; +} + +static inline enum uic_link_state +ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl) +{ + return ufs_pm_lvl_states[lvl].link_state; +} + static void ufshcd_tmc_handler(struct ufs_hba *hba); static void ufshcd_async_scan(void *data, async_cookie_t cookie); static int ufshcd_reset_and_restore(struct ufs_hba *hba); static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag); static void ufshcd_hba_exit(struct ufs_hba *hba); static int ufshcd_probe_hba(struct ufs_hba *hba); +static int ufshcd_host_reset_and_restore(struct ufs_hba *hba); +static irqreturn_t ufshcd_intr(int irq, void *__hba); + +static inline int ufshcd_enable_irq(struct ufs_hba *hba) +{ + int ret = 0; + + if (!hba->is_irq_enabled) { + ret = request_irq(hba->irq, ufshcd_intr, IRQF_SHARED, UFSHCD, + hba); + if (ret) + dev_err(hba->dev, "%s: request_irq failed, ret=%d\n", + __func__, ret); + hba->is_irq_enabled = true; + } + + return ret; +} + +static inline void ufshcd_disable_irq(struct ufs_hba *hba) +{ + if (hba->is_irq_enabled) { + free_irq(hba->irq, hba); + hba->is_irq_enabled = false; + } +} /* * ufshcd_wait_for_register - wait for register value to change @@ -609,15 +668,12 @@ ufshcd_wait_for_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) * @uic_cmd: UIC command * * Identical to ufshcd_send_uic_cmd() expect mutex. Must be called - * with mutex held. + * with mutex held and host_lock locked. * Returns 0 only if success. */ static int __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) { - int ret; - unsigned long flags; - if (!ufshcd_ready_for_uic_cmd(hba)) { dev_err(hba->dev, "Controller not ready to accept UIC commands\n"); @@ -626,13 +682,9 @@ __ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) init_completion(&uic_cmd->done); - spin_lock_irqsave(hba->host->host_lock, flags); ufshcd_dispatch_uic_cmd(hba, uic_cmd); - spin_unlock_irqrestore(hba->host->host_lock, flags); - ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd); - - return ret; + return 0; } /** @@ -646,9 +698,15 @@ static int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) { int ret; + unsigned long flags; mutex_lock(&hba->uic_cmd_mutex); + spin_lock_irqsave(hba->host->host_lock, flags); ret = __ufshcd_send_uic_cmd(hba, uic_cmd); + spin_unlock_irqrestore(hba->host->host_lock, flags); + if (!ret) + ret = ufshcd_wait_for_uic_cmd(hba, uic_cmd); + mutex_unlock(&hba->uic_cmd_mutex); return ret; @@ -1789,44 +1847,54 @@ out: EXPORT_SYMBOL_GPL(ufshcd_dme_get_attr); /** - * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage - * using DME_SET primitives. + * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power + * state) and waits for it to take effect. + * * @hba: per adapter instance - * @mode: powr mode value + * @cmd: UIC command to execute + * + * DME operations like DME_SET(PA_PWRMODE), DME_HIBERNATE_ENTER & + * DME_HIBERNATE_EXIT commands take some time to take its effect on both host + * and device UniPro link and hence it's final completion would be indicated by + * dedicated status bits in Interrupt Status register (UPMS, UHES, UHXS) in + * addition to normal UIC command completion Status (UCCS). This function only + * returns after the relevant status bits indicate the completion. * * Returns 0 on success, non-zero value on failure */ -static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) +static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) { - struct uic_command uic_cmd = {0}; - struct completion pwr_done; + struct completion uic_async_done; unsigned long flags; u8 status; int ret; - uic_cmd.command = UIC_CMD_DME_SET; - uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); - uic_cmd.argument3 = mode; - init_completion(&pwr_done); - mutex_lock(&hba->uic_cmd_mutex); + init_completion(&uic_async_done); spin_lock_irqsave(hba->host->host_lock, flags); - hba->pwr_done = &pwr_done; + hba->uic_async_done = &uic_async_done; + ret = __ufshcd_send_uic_cmd(hba, cmd); spin_unlock_irqrestore(hba->host->host_lock, flags); - ret = __ufshcd_send_uic_cmd(hba, &uic_cmd); if (ret) { dev_err(hba->dev, - "pwr mode change with mode 0x%x uic error %d\n", - mode, ret); + "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", + cmd->command, cmd->argument3, ret); + goto out; + } + ret = ufshcd_wait_for_uic_cmd(hba, cmd); + if (ret) { + dev_err(hba->dev, + "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", + cmd->command, cmd->argument3, ret); goto out; } - if (!wait_for_completion_timeout(hba->pwr_done, + if (!wait_for_completion_timeout(hba->uic_async_done, msecs_to_jiffies(UIC_CMD_TIMEOUT))) { dev_err(hba->dev, - "pwr mode change with mode 0x%x completion timeout\n", - mode); + "pwr ctrl cmd 0x%x with mode 0x%x completion timeout\n", + cmd->command, cmd->argument3); ret = -ETIMEDOUT; goto out; } @@ -1834,19 +1902,62 @@ static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) status = ufshcd_get_upmcrs(hba); if (status != PWR_LOCAL) { dev_err(hba->dev, - "pwr mode change failed, host umpcrs:0x%x\n", - status); + "pwr ctrl cmd 0x%0x failed, host umpcrs:0x%x\n", + cmd->command, status); ret = (status != PWR_OK) ? status : -1; } out: spin_lock_irqsave(hba->host->host_lock, flags); - hba->pwr_done = NULL; + hba->uic_async_done = NULL; spin_unlock_irqrestore(hba->host->host_lock, flags); mutex_unlock(&hba->uic_cmd_mutex); return ret; } /** + * ufshcd_uic_change_pwr_mode - Perform the UIC power mode chage + * using DME_SET primitives. + * @hba: per adapter instance + * @mode: powr mode value + * + * Returns 0 on success, non-zero value on failure + */ +static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) +{ + struct uic_command uic_cmd = {0}; + + uic_cmd.command = UIC_CMD_DME_SET; + uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); + uic_cmd.argument3 = mode; + + return ufshcd_uic_pwr_ctrl(hba, &uic_cmd); +} + +static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + + uic_cmd.command = UIC_CMD_DME_HIBER_ENTER; + + return ufshcd_uic_pwr_ctrl(hba, &uic_cmd); +} + +static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba) +{ + struct uic_command uic_cmd = {0}; + int ret; + + uic_cmd.command = UIC_CMD_DME_HIBER_EXIT; + ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); + if (ret) { + ufshcd_set_link_off(hba); + ret = ufshcd_host_reset_and_restore(hba); + } + + return ret; +} + +/** * ufshcd_config_max_pwr_mode - Set & Change power mode with * maximum capability attribute information. * @hba: per adapter instance @@ -2045,6 +2156,9 @@ static int ufshcd_hba_enable(struct ufs_hba *hba) msleep(5); } + /* UniPro link is disabled at this point */ + ufshcd_set_link_off(hba); + if (hba->vops && hba->vops->hce_enable_notify) hba->vops->hce_enable_notify(hba, PRE_CHANGE); @@ -2077,7 +2191,7 @@ static int ufshcd_hba_enable(struct ufs_hba *hba) } /* enable UIC related interrupts */ - ufshcd_enable_intr(hba, UIC_COMMAND_COMPL); + ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); if (hba->vops && hba->vops->hce_enable_notify) hba->vops->hce_enable_notify(hba, POST_CHANGE); @@ -2206,6 +2320,62 @@ static void ufshcd_set_queue_depth(struct scsi_device *sdev) scsi_activate_tcq(sdev, lun_qdepth); } +/* + * ufshcd_get_lu_wp - returns the "b_lu_write_protect" from UNIT DESCRIPTOR + * @hba: per-adapter instance + * @lun: UFS device lun id + * @b_lu_write_protect: pointer to buffer to hold the LU's write protect info + * + * Returns 0 in case of success and b_lu_write_protect status would be returned + * @b_lu_write_protect parameter. + * Returns -ENOTSUPP if reading b_lu_write_protect is not supported. + * Returns -EINVAL in case of invalid parameters passed to this function. + */ +static int ufshcd_get_lu_wp(struct ufs_hba *hba, + u8 lun, + u8 *b_lu_write_protect) +{ + int ret; + + if (!b_lu_write_protect) + ret = -EINVAL; + /* + * According to UFS device spec, RPMB LU can't be write + * protected so skip reading bLUWriteProtect parameter for + * it. For other W-LUs, UNIT DESCRIPTOR is not available. + */ + else if (lun >= UFS_UPIU_MAX_GENERAL_LUN) + ret = -ENOTSUPP; + else + ret = ufshcd_read_unit_desc_param(hba, + lun, + UNIT_DESC_PARAM_LU_WR_PROTECT, + b_lu_write_protect, + sizeof(*b_lu_write_protect)); + return ret; +} + +/** + * ufshcd_get_lu_power_on_wp_status - get LU's power on write protect + * status + * @hba: per-adapter instance + * @sdev: pointer to SCSI device + * + */ +static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba, + struct scsi_device *sdev) +{ + if (hba->dev_info.f_power_on_wp_en && + !hba->dev_info.is_lu_power_on_wp) { + u8 b_lu_write_protect; + + if (!ufshcd_get_lu_wp(hba, ufshcd_scsi_to_upiu_lun(sdev->lun), + &b_lu_write_protect) && + (b_lu_write_protect == UFS_LU_POWER_ON_WP)) + hba->dev_info.is_lu_power_on_wp = true; + } +} + /** * ufshcd_slave_alloc - handle initial SCSI device configurations * @sdev: pointer to SCSI device @@ -2232,6 +2402,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev) ufshcd_set_queue_depth(sdev); + ufshcd_get_lu_power_on_wp_status(hba, sdev); + return 0; } @@ -2462,8 +2634,8 @@ static void ufshcd_uic_cmd_compl(struct ufs_hba *hba, u32 intr_status) complete(&hba->active_uic_cmd->done); } - if ((intr_status & UIC_POWER_MODE) && hba->pwr_done) - complete(hba->pwr_done); + if ((intr_status & UFSHCD_UIC_PWR_MASK) && hba->uic_async_done) + complete(hba->uic_async_done); } /** @@ -2675,33 +2847,62 @@ static inline int ufshcd_get_bkops_status(struct ufs_hba *hba, u32 *status) } /** - * ufshcd_urgent_bkops - handle urgent bkops exception event + * ufshcd_bkops_ctrl - control the auto bkops based on current bkops status * @hba: per-adapter instance + * @status: bkops_status value * - * Enable fBackgroundOpsEn flag in the device to permit background - * operations. + * Read the bkops_status from the UFS device and Enable fBackgroundOpsEn + * flag in the device to permit background operations if the device + * bkops_status is greater than or equal to "status" argument passed to + * this function, disable otherwise. + * + * Returns 0 for success, non-zero in case of failure. + * + * NOTE: Caller of this function can check the "hba->auto_bkops_enabled" flag + * to know whether auto bkops is enabled or disabled after this function + * returns control to it. */ -static int ufshcd_urgent_bkops(struct ufs_hba *hba) +static int ufshcd_bkops_ctrl(struct ufs_hba *hba, + enum bkops_status status) { int err; - u32 status = 0; + u32 curr_status = 0; - err = ufshcd_get_bkops_status(hba, &status); + err = ufshcd_get_bkops_status(hba, &curr_status); if (err) { dev_err(hba->dev, "%s: failed to get BKOPS status %d\n", __func__, err); goto out; + } else if (curr_status > BKOPS_STATUS_MAX) { + dev_err(hba->dev, "%s: invalid BKOPS status %d\n", + __func__, curr_status); + err = -EINVAL; + goto out; } - status = status & 0xF; - - /* handle only if status indicates performance impact or critical */ - if (status >= BKOPS_STATUS_PERF_IMPACT) + if (curr_status >= status) err = ufshcd_enable_auto_bkops(hba); + else + err = ufshcd_disable_auto_bkops(hba); out: return err; } +/** + * ufshcd_urgent_bkops - handle urgent bkops exception event + * @hba: per-adapter instance + * + * Enable fBackgroundOpsEn flag in the device to permit background + * operations. + * + * If BKOPs is enabled, this function returns 0, 1 if the bkops in not enabled + * and negative error value for any other failure. + */ +static int ufshcd_urgent_bkops(struct ufs_hba *hba) +{ + return ufshcd_bkops_ctrl(hba, BKOPS_STATUS_PERF_IMPACT); +} + static inline int ufshcd_get_ee_status(struct ufs_hba *hba, u32 *status) { return ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, @@ -2733,7 +2934,7 @@ static void ufshcd_exception_event_handler(struct work_struct *work) status &= hba->ee_ctrl_mask; if (status & MASK_EE_URGENT_BKOPS) { err = ufshcd_urgent_bkops(hba); - if (err) + if (err < 0) dev_err(hba->dev, "%s: failed to handle urgent bkops %d\n", __func__, err); } @@ -3539,7 +3740,8 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) if (ret) goto out; - ufshcd_config_max_pwr_mode(hba); + /* UniPro link is active now */ + ufshcd_set_link_active(hba); ret = ufshcd_verify_dev_init(hba); if (ret) @@ -3549,11 +3751,27 @@ static int ufshcd_probe_hba(struct ufs_hba *hba) if (ret) goto out; + /* UFS device is also active now */ + ufshcd_set_ufs_dev_active(hba); ufshcd_force_reset_auto_bkops(hba); hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; + hba->wlun_dev_clr_ua = true; + + ufshcd_config_max_pwr_mode(hba); + + /* + * If we are in error handling context or in power management callbacks + * context, no need to scan the host + */ + if (!ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) { + bool flag; + + /* clear any previous UFS device information */ + memset(&hba->dev_info, 0, sizeof(hba->dev_info)); + if (!ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, + QUERY_FLAG_IDN_PWR_ON_WPE, &flag)) + hba->dev_info.f_power_on_wp_en = flag; - /* If we are in error handling context no need to scan the host */ - if (!ufshcd_eh_in_progress(hba)) { if (!hba->is_init_prefetch) ufshcd_init_icc_levels(hba); @@ -3573,8 +3791,10 @@ out: * If we failed to initialize the device or the device is not * present, turn off the power/clocks etc. */ - if (ret && !ufshcd_eh_in_progress(hba)) + if (ret && !ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) { + pm_runtime_put_sync(hba->dev); ufshcd_hba_exit(hba); + } return ret; } @@ -3609,6 +3829,42 @@ static struct scsi_host_template ufshcd_driver_template = { .can_queue = UFSHCD_CAN_QUEUE, }; +static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, + int ua) +{ + int ret = 0; + struct regulator *reg = vreg->reg; + const char *name = vreg->name; + + BUG_ON(!vreg); + + ret = regulator_set_optimum_mode(reg, ua); + if (ret >= 0) { + /* + * regulator_set_optimum_mode() returns new regulator + * mode upon success. + */ + ret = 0; + } else { + dev_err(dev, "%s: %s set optimum mode(ua=%d) failed, err=%d\n", + __func__, name, ua, ret); + } + + return ret; +} + +static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba, + struct ufs_vreg *vreg) +{ + return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA); +} + +static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba, + struct ufs_vreg *vreg) +{ + return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA); +} + static int ufshcd_config_vreg(struct device *dev, struct ufs_vreg *vreg, bool on) { @@ -3629,18 +3885,9 @@ static int ufshcd_config_vreg(struct device *dev, } uA_load = on ? vreg->max_uA : 0; - ret = regulator_set_optimum_mode(reg, uA_load); - if (ret >= 0) { - /* - * regulator_set_optimum_mode() returns new regulator - * mode upon success. - */ - ret = 0; - } else { - dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n", - __func__, name, uA_load, ret); + ret = ufshcd_config_vreg_load(dev, vreg, uA_load); + if (ret) goto out; - } } out: return ret; @@ -3776,7 +4023,8 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba) return 0; } -static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on) +static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on, + bool skip_ref_clk) { int ret = 0; struct ufs_clk_info *clki; @@ -3787,6 +4035,9 @@ static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on) list_for_each_entry(clki, head, list) { if (!IS_ERR_OR_NULL(clki->clk)) { + if (skip_ref_clk && !strcmp(clki->name, "ref_clk")) + continue; + if (on && !clki->enabled) { ret = clk_prepare_enable(clki->clk); if (ret) { @@ -3812,6 +4063,11 @@ out: return ret; } +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on) +{ + return __ufshcd_setup_clocks(hba, on, false); +} + static int ufshcd_init_clocks(struct ufs_hba *hba) { int ret = 0; @@ -3968,68 +4224,532 @@ static void ufshcd_hba_exit(struct ufs_hba *hba) } } +static int +ufshcd_send_request_sense(struct ufs_hba *hba, struct scsi_device *sdp) +{ + unsigned char cmd[6] = {REQUEST_SENSE, + 0, + 0, + 0, + SCSI_SENSE_BUFFERSIZE, + 0}; + char *buffer; + int ret; + + buffer = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); + if (!buffer) { + ret = -ENOMEM; + goto out; + } + + ret = scsi_execute_req_flags(sdp, cmd, DMA_FROM_DEVICE, buffer, + SCSI_SENSE_BUFFERSIZE, NULL, + msecs_to_jiffies(1000), 3, NULL, REQ_PM); + if (ret) + pr_err("%s: failed with err %d\n", __func__, ret); + + kfree(buffer); +out: + return ret; +} + +/** + * ufshcd_set_dev_pwr_mode - sends START STOP UNIT command to set device + * power mode + * @hba: per adapter instance + * @pwr_mode: device power mode to set + * + * Returns 0 if requested power mode is set successfully + * Returns non-zero if failed to set the requested power mode + */ +static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba, + enum ufs_dev_pwr_mode pwr_mode) +{ + unsigned char cmd[6] = { START_STOP }; + struct scsi_sense_hdr sshdr; + struct scsi_device *sdp = hba->sdev_ufs_device; + int ret; + + if (!sdp || !scsi_device_online(sdp)) + return -ENODEV; + + /* + * If scsi commands fail, the scsi mid-layer schedules scsi error- + * handling, which would wait for host to be resumed. Since we know + * we are functional while we are here, skip host resume in error + * handling context. + */ + hba->host->eh_noresume = 1; + if (hba->wlun_dev_clr_ua) { + ret = ufshcd_send_request_sense(hba, sdp); + if (ret) + goto out; + /* Unit attention condition is cleared now */ + hba->wlun_dev_clr_ua = false; + } + + cmd[4] = pwr_mode << 4; + + /* + * Current function would be generally called from the power management + * callbacks hence set the REQ_PM flag so that it doesn't resume the + * already suspended childs. + */ + ret = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr, + START_STOP_TIMEOUT, 0, NULL, REQ_PM); + if (ret) { + sdev_printk(KERN_WARNING, sdp, + "START_STOP failed for power mode: %d\n", pwr_mode); + scsi_show_result(ret); + if (driver_byte(ret) & DRIVER_SENSE) { + scsi_show_sense_hdr(&sshdr); + scsi_show_extd_sense(sshdr.asc, sshdr.ascq); + } + } + + if (!ret) + hba->curr_dev_pwr_mode = pwr_mode; +out: + hba->host->eh_noresume = 0; + return ret; +} + +static int ufshcd_link_state_transition(struct ufs_hba *hba, + enum uic_link_state req_link_state, + int check_for_bkops) +{ + int ret = 0; + + if (req_link_state == hba->uic_link_state) + return 0; + + if (req_link_state == UIC_LINK_HIBERN8_STATE) { + ret = ufshcd_uic_hibern8_enter(hba); + if (!ret) + ufshcd_set_link_hibern8(hba); + else + goto out; + } + /* + * If autobkops is enabled, link can't be turned off because + * turning off the link would also turn off the device. + */ + else if ((req_link_state == UIC_LINK_OFF_STATE) && + (!check_for_bkops || (check_for_bkops && + !hba->auto_bkops_enabled))) { + /* + * Change controller state to "reset state" which + * should also put the link in off/reset state + */ + ufshcd_hba_stop(hba); + /* + * TODO: Check if we need any delay to make sure that + * controller is reset + */ + ufshcd_set_link_off(hba); + } + +out: + return ret; +} + +static void ufshcd_vreg_set_lpm(struct ufs_hba *hba) +{ + /* + * If UFS device is either in UFS_Sleep turn off VCC rail to save some + * power. + * + * If UFS device and link is in OFF state, all power supplies (VCC, + * VCCQ, VCCQ2) can be turned off if power on write protect is not + * required. If UFS link is inactive (Hibern8 or OFF state) and device + * is in sleep state, put VCCQ & VCCQ2 rails in LPM mode. + * + * Ignore the error returned by ufshcd_toggle_vreg() as device is anyway + * in low power state which would save some power. + */ + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && + !hba->dev_info.is_lu_power_on_wp) { + ufshcd_setup_vreg(hba, false); + } else if (!ufshcd_is_ufs_dev_active(hba)) { + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); + if (!ufshcd_is_link_active(hba)) { + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2); + } + } +} + +static int ufshcd_vreg_set_hpm(struct ufs_hba *hba) +{ + int ret = 0; + + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba) && + !hba->dev_info.is_lu_power_on_wp) { + ret = ufshcd_setup_vreg(hba, true); + } else if (!ufshcd_is_ufs_dev_active(hba)) { + ret = ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, true); + if (!ret && !ufshcd_is_link_active(hba)) { + ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq); + if (ret) + goto vcc_disable; + ret = ufshcd_config_vreg_hpm(hba, hba->vreg_info.vccq2); + if (ret) + goto vccq_lpm; + } + } + goto out; + +vccq_lpm: + ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq); +vcc_disable: + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false); +out: + return ret; +} + +static void ufshcd_hba_vreg_set_lpm(struct ufs_hba *hba) +{ + if (ufshcd_is_link_off(hba)) + ufshcd_setup_hba_vreg(hba, false); +} + +static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba) +{ + if (ufshcd_is_link_off(hba)) + ufshcd_setup_hba_vreg(hba, true); +} + /** - * ufshcd_suspend - suspend power management function + * ufshcd_suspend - helper function for suspend operations * @hba: per adapter instance - * @state: power state + * @pm_op: desired low power operation type + * + * This function will try to put the UFS device and link into low power + * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl" + * (System PM level). + * + * If this function is called during shutdown, it will make sure that + * both UFS device and UFS link is powered off. * - * Returns -ENOSYS + * NOTE: UFS device & link must be active before we enter in this function. + * + * Returns 0 for success and non-zero for failure */ -int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state) +static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) { + int ret = 0; + enum ufs_pm_level pm_lvl; + enum ufs_dev_pwr_mode req_dev_pwr_mode; + enum uic_link_state req_link_state; + + hba->pm_op_in_progress = 1; + if (!ufshcd_is_shutdown_pm(pm_op)) { + pm_lvl = ufshcd_is_runtime_pm(pm_op) ? + hba->rpm_lvl : hba->spm_lvl; + req_dev_pwr_mode = ufs_get_pm_lvl_to_dev_pwr_mode(pm_lvl); + req_link_state = ufs_get_pm_lvl_to_link_pwr_state(pm_lvl); + } else { + req_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE; + req_link_state = UIC_LINK_OFF_STATE; + } + /* - * TODO: - * 1. Block SCSI requests from SCSI midlayer - * 2. Change the internal driver state to non operational - * 3. Set UTRLRSR and UTMRLRSR bits to zero - * 4. Wait until outstanding commands are completed - * 5. Set HCE to zero to send the UFS host controller to reset state + * If we can't transition into any of the low power modes + * just gate the clocks. */ + if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE && + req_link_state == UIC_LINK_ACTIVE_STATE) { + goto disable_clks; + } - return -ENOSYS; + if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) && + (req_link_state == hba->uic_link_state)) + goto out; + + /* UFS device & link must be active before we enter in this function */ + if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) { + ret = -EINVAL; + goto out; + } + + if (ufshcd_is_runtime_pm(pm_op)) { + /* + * The device is idle with no requests in the queue, + * allow background operations if needed. + */ + ret = ufshcd_bkops_ctrl(hba, BKOPS_STATUS_NON_CRITICAL); + if (ret) + goto out; + } + + if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) && + ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) || + !ufshcd_is_runtime_pm(pm_op))) { + /* ensure that bkops is disabled */ + ufshcd_disable_auto_bkops(hba); + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode); + if (ret) + goto out; + } + + ret = ufshcd_link_state_transition(hba, req_link_state, 1); + if (ret) + goto set_dev_active; + + ufshcd_vreg_set_lpm(hba); + +disable_clks: + /* + * Call vendor specific suspend callback. As these callbacks may access + * vendor specific host controller register space call them before the + * host clocks are ON. + */ + if (hba->vops && hba->vops->suspend) { + ret = hba->vops->suspend(hba, pm_op); + if (ret) + goto set_link_active; + } + + if (hba->vops && hba->vops->setup_clocks) { + ret = hba->vops->setup_clocks(hba, false); + if (ret) + goto vops_resume; + } + + if (!ufshcd_is_link_active(hba)) + ufshcd_setup_clocks(hba, false); + else + /* If link is active, device ref_clk can't be switched off */ + __ufshcd_setup_clocks(hba, false, true); + + /* + * Disable the host irq as host controller as there won't be any + * host controller trasanction expected till resume. + */ + ufshcd_disable_irq(hba); + /* Put the host controller in low power mode if possible */ + ufshcd_hba_vreg_set_lpm(hba); + goto out; + +vops_resume: + if (hba->vops && hba->vops->resume) + hba->vops->resume(hba, pm_op); +set_link_active: + ufshcd_vreg_set_hpm(hba); + if (ufshcd_is_link_hibern8(hba) && !ufshcd_uic_hibern8_exit(hba)) + ufshcd_set_link_active(hba); + else if (ufshcd_is_link_off(hba)) + ufshcd_host_reset_and_restore(hba); +set_dev_active: + if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE)) + ufshcd_disable_auto_bkops(hba); +out: + hba->pm_op_in_progress = 0; + return ret; } -EXPORT_SYMBOL_GPL(ufshcd_suspend); /** - * ufshcd_resume - resume power management function + * ufshcd_resume - helper function for resume operations * @hba: per adapter instance + * @pm_op: runtime PM or system PM * - * Returns -ENOSYS + * This function basically brings the UFS device, UniPro link and controller + * to active state. + * + * Returns 0 for success and non-zero for failure */ -int ufshcd_resume(struct ufs_hba *hba) +static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { + int ret; + enum uic_link_state old_link_state; + + hba->pm_op_in_progress = 1; + old_link_state = hba->uic_link_state; + + ufshcd_hba_vreg_set_hpm(hba); + /* Make sure clocks are enabled before accessing controller */ + ret = ufshcd_setup_clocks(hba, true); + if (ret) + goto out; + + if (hba->vops && hba->vops->setup_clocks) { + ret = hba->vops->setup_clocks(hba, true); + if (ret) + goto disable_clks; + } + + /* enable the host irq as host controller would be active soon */ + ret = ufshcd_enable_irq(hba); + if (ret) + goto disable_irq_and_vops_clks; + + ret = ufshcd_vreg_set_hpm(hba); + if (ret) + goto disable_irq_and_vops_clks; + /* - * TODO: - * 1. Set HCE to 1, to start the UFS host controller - * initialization process - * 2. Set UTRLRSR and UTMRLRSR bits to 1 - * 3. Change the internal driver state to operational - * 4. Unblock SCSI requests from SCSI midlayer + * Call vendor specific resume callback. As these callbacks may access + * vendor specific host controller register space call them when the + * host clocks are ON. */ + if (hba->vops && hba->vops->resume) { + ret = hba->vops->resume(hba, pm_op); + if (ret) + goto disable_vreg; + } + + if (ufshcd_is_link_hibern8(hba)) { + ret = ufshcd_uic_hibern8_exit(hba); + if (!ret) + ufshcd_set_link_active(hba); + else + goto vendor_suspend; + } else if (ufshcd_is_link_off(hba)) { + ret = ufshcd_host_reset_and_restore(hba); + /* + * ufshcd_host_reset_and_restore() should have already + * set the link state as active + */ + if (ret || !ufshcd_is_link_active(hba)) + goto vendor_suspend; + } + + if (!ufshcd_is_ufs_dev_active(hba)) { + ret = ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE); + if (ret) + goto set_old_link_state; + } + + ufshcd_disable_auto_bkops(hba); + goto out; + +set_old_link_state: + ufshcd_link_state_transition(hba, old_link_state, 0); +vendor_suspend: + if (hba->vops && hba->vops->suspend) + hba->vops->suspend(hba, pm_op); +disable_vreg: + ufshcd_vreg_set_lpm(hba); +disable_irq_and_vops_clks: + ufshcd_disable_irq(hba); + if (hba->vops && hba->vops->setup_clocks) + ret = hba->vops->setup_clocks(hba, false); +disable_clks: + ufshcd_setup_clocks(hba, false); +out: + hba->pm_op_in_progress = 0; + return ret; +} + +/** + * ufshcd_system_suspend - system suspend routine + * @hba: per adapter instance + * @pm_op: runtime PM or system PM + * + * Check the description of ufshcd_suspend() function for more details. + * + * Returns 0 for success and non-zero for failure + */ +int ufshcd_system_suspend(struct ufs_hba *hba) +{ + int ret = 0; + + if (!hba || !hba->is_powered) + goto out; + + if (pm_runtime_suspended(hba->dev)) { + if (hba->rpm_lvl == hba->spm_lvl) + /* + * There is possibility that device may still be in + * active state during the runtime suspend. + */ + if ((ufs_get_pm_lvl_to_dev_pwr_mode(hba->spm_lvl) == + hba->curr_dev_pwr_mode) && !hba->auto_bkops_enabled) + goto out; + + /* + * UFS device and/or UFS link low power states during runtime + * suspend seems to be different than what is expected during + * system suspend. Hence runtime resume the devic & link and + * let the system suspend low power states to take effect. + * TODO: If resume takes longer time, we might have optimize + * it in future by not resuming everything if possible. + */ + ret = ufshcd_runtime_resume(hba); + if (ret) + goto out; + } + + ret = ufshcd_suspend(hba, UFS_SYSTEM_PM); +out: + return ret; +} +EXPORT_SYMBOL(ufshcd_system_suspend); + +/** + * ufshcd_system_resume - system resume routine + * @hba: per adapter instance + * + * Returns 0 for success and non-zero for failure + */ - return -ENOSYS; +int ufshcd_system_resume(struct ufs_hba *hba) +{ + if (!hba || !hba->is_powered || pm_runtime_suspended(hba->dev)) + /* + * Let the runtime resume take care of resuming + * if runtime suspended. + */ + return 0; + + return ufshcd_resume(hba, UFS_SYSTEM_PM); } -EXPORT_SYMBOL_GPL(ufshcd_resume); +EXPORT_SYMBOL(ufshcd_system_resume); +/** + * ufshcd_runtime_suspend - runtime suspend routine + * @hba: per adapter instance + * + * Check the description of ufshcd_suspend() function for more details. + * + * Returns 0 for success and non-zero for failure + */ int ufshcd_runtime_suspend(struct ufs_hba *hba) { - if (!hba) + if (!hba || !hba->is_powered) return 0; - /* - * The device is idle with no requests in the queue, - * allow background operations. - */ - return ufshcd_enable_auto_bkops(hba); + return ufshcd_suspend(hba, UFS_RUNTIME_PM); } EXPORT_SYMBOL(ufshcd_runtime_suspend); +/** + * ufshcd_runtime_resume - runtime resume routine + * @hba: per adapter instance + * + * This function basically brings the UFS device, UniPro link and controller + * to active state. Following operations are done in this function: + * + * 1. Turn on all the controller related clocks + * 2. Bring the UniPro link out of Hibernate state + * 3. If UFS device is in sleep state, turn ON VCC rail and bring the UFS device + * to active state. + * 4. If auto-bkops is enabled on the device, disable it. + * + * So following would be the possible power state after this function return + * successfully: + * S1: UFS device in Active state with VCC rail ON + * UniPro link in Active state + * All the UFS/UniPro controller clocks are ON + * + * Returns 0 for success and non-zero for failure + */ int ufshcd_runtime_resume(struct ufs_hba *hba) { - if (!hba) + if (!hba || !hba->is_powered) return 0; - - return ufshcd_disable_auto_bkops(hba); + else + return ufshcd_resume(hba, UFS_RUNTIME_PM); } EXPORT_SYMBOL(ufshcd_runtime_resume); @@ -4040,6 +4760,36 @@ int ufshcd_runtime_idle(struct ufs_hba *hba) EXPORT_SYMBOL(ufshcd_runtime_idle); /** + * ufshcd_shutdown - shutdown routine + * @hba: per adapter instance + * + * This function would power off both UFS device and UFS link. + * + * Returns 0 always to allow force shutdown even in case of errors. + */ +int ufshcd_shutdown(struct ufs_hba *hba) +{ + int ret = 0; + + if (ufshcd_is_ufs_dev_poweroff(hba) && ufshcd_is_link_off(hba)) + goto out; + + if (pm_runtime_suspended(hba->dev)) { + ret = ufshcd_runtime_resume(hba); + if (ret) + goto out; + } + + ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM); +out: + if (ret) + dev_err(hba->dev, "%s failed, err %d\n", __func__, ret); + /* allow force shutdown even in case of errors */ + return 0; +} +EXPORT_SYMBOL(ufshcd_shutdown); + +/** * ufshcd_remove - de-allocate SCSI host and host memory space * data structure memory * @hba - per adapter instance @@ -4192,6 +4942,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) if (err) { dev_err(hba->dev, "request irq failed\n"); goto out_disable; + } else { + hba->is_irq_enabled = true; } /* Enable SCSI tag mapping */ @@ -4217,6 +4969,12 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) /* Hold auto suspend until async scan completes */ pm_runtime_get_sync(dev); + /* + * The device-initialize-sequence hasn't been invoked yet. + * Set the device to power-off state + */ + ufshcd_set_ufs_dev_poweroff(hba); + async_schedule(ufshcd_async_scan, hba); return 0; @@ -4224,6 +4982,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq) out_remove_scsi_host: scsi_remove_host(hba->host); out_disable: + hba->is_irq_enabled = false; scsi_host_put(host); ufshcd_hba_exit(hba); out_error: diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index 5c25337bfcc..e1bde0598d9 100644 --- a/drivers/scsi/ufs/ufshcd.h +++ b/drivers/scsi/ufs/ufshcd.h @@ -96,6 +96,54 @@ struct uic_command { struct completion done; }; +/* Used to differentiate the power management options */ +enum ufs_pm_op { + UFS_RUNTIME_PM, + UFS_SYSTEM_PM, + UFS_SHUTDOWN_PM, +}; + +#define ufshcd_is_runtime_pm(op) ((op) == UFS_RUNTIME_PM) +#define ufshcd_is_system_pm(op) ((op) == UFS_SYSTEM_PM) +#define ufshcd_is_shutdown_pm(op) ((op) == UFS_SHUTDOWN_PM) + +/* Host <-> Device UniPro Link state */ +enum uic_link_state { + UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */ + UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */ + UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */ +}; + +#define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE) +#define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \ + UIC_LINK_ACTIVE_STATE) +#define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \ + UIC_LINK_HIBERN8_STATE) +#define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE) +#define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \ + UIC_LINK_ACTIVE_STATE) +#define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \ + UIC_LINK_HIBERN8_STATE) + +/* + * UFS Power management levels. + * Each level is in increasing order of power savings. + */ +enum ufs_pm_level { + UFS_PM_LVL_0, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_ACTIVE_STATE */ + UFS_PM_LVL_1, /* UFS_ACTIVE_PWR_MODE, UIC_LINK_HIBERN8_STATE */ + UFS_PM_LVL_2, /* UFS_SLEEP_PWR_MODE, UIC_LINK_ACTIVE_STATE */ + UFS_PM_LVL_3, /* UFS_SLEEP_PWR_MODE, UIC_LINK_HIBERN8_STATE */ + UFS_PM_LVL_4, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_HIBERN8_STATE */ + UFS_PM_LVL_5, /* UFS_POWERDOWN_PWR_MODE, UIC_LINK_OFF_STATE */ + UFS_PM_LVL_MAX +}; + +struct ufs_pm_lvl_states { + enum ufs_dev_pwr_mode dev_state; + enum uic_link_state link_state; +}; + /** * struct ufshcd_lrb - local reference block * @utr_descriptor_ptr: UTRD address of the command @@ -184,6 +232,8 @@ struct ufs_clk_info { * variant specific Uni-Pro initialization. * @link_startup_notify: called before and after Link startup is carried out * to allow variant specific Uni-Pro initialization. + * @suspend: called during host controller PM callback + * @resume: called during host controller PM callback */ struct ufs_hba_variant_ops { const char *name; @@ -193,6 +243,8 @@ struct ufs_hba_variant_ops { int (*setup_regulators)(struct ufs_hba *, bool); int (*hce_enable_notify)(struct ufs_hba *, bool); int (*link_startup_notify)(struct ufs_hba *, bool); + int (*suspend)(struct ufs_hba *, enum ufs_pm_op); + int (*resume)(struct ufs_hba *, enum ufs_pm_op); }; /** @@ -274,6 +326,14 @@ struct ufs_hba { struct scsi_device *sdev_rpmb; struct scsi_device *sdev_boot; + enum ufs_dev_pwr_mode curr_dev_pwr_mode; + enum uic_link_state uic_link_state; + /* Desired UFS power management level during runtime PM */ + enum ufs_pm_level rpm_lvl; + /* Desired UFS power management level during system PM */ + enum ufs_pm_level spm_lvl; + int pm_op_in_progress; + struct ufshcd_lrb *lrb; unsigned long lrb_in_use; @@ -287,16 +347,17 @@ struct ufs_hba { struct ufs_hba_variant_ops *vops; void *priv; unsigned int irq; + bool is_irq_enabled; - struct uic_command *active_uic_cmd; - struct mutex uic_cmd_mutex; wait_queue_head_t tm_wq; wait_queue_head_t tm_tag_wq; unsigned long tm_condition; unsigned long tm_slots_in_use; - struct completion *pwr_done; + struct uic_command *active_uic_cmd; + struct mutex uic_cmd_mutex; + struct completion *uic_async_done; u32 ufshcd_state; u32 eh_flags; @@ -319,9 +380,13 @@ struct ufs_hba { /* Device management request data */ struct ufs_dev_cmd dev_cmd; + /* Keeps information of the UFS device connected to this host */ + struct ufs_dev_info dev_info; bool auto_bkops_enabled; struct ufs_vreg_info vreg_info; struct list_head clk_list_head; + + bool wlun_dev_clr_ua; }; #define ufshcd_writel(hba, val, reg) \ @@ -348,11 +413,12 @@ static inline void check_upiu_size(void) GENERAL_UPIU_REQUEST_SIZE + QUERY_DESC_MAX_SIZE); } -extern int ufshcd_suspend(struct ufs_hba *hba, pm_message_t state); -extern int ufshcd_resume(struct ufs_hba *hba); extern int ufshcd_runtime_suspend(struct ufs_hba *hba); extern int ufshcd_runtime_resume(struct ufs_hba *hba); extern int ufshcd_runtime_idle(struct ufs_hba *hba); +extern int ufshcd_system_suspend(struct ufs_hba *hba); +extern int ufshcd_system_resume(struct ufs_hba *hba); +extern int ufshcd_shutdown(struct ufs_hba *hba); extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, u8 attr_set, u32 mib_val, u8 peer); extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, diff --git a/drivers/scsi/ufs/ufshci.h b/drivers/scsi/ufs/ufshci.h index e1b844bc946..d5721199e9c 100644 --- a/drivers/scsi/ufs/ufshci.h +++ b/drivers/scsi/ufs/ufshci.h @@ -124,8 +124,11 @@ enum { #define CONTROLLER_FATAL_ERROR UFS_BIT(16) #define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17) -#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL |\ - UIC_POWER_MODE) +#define UFSHCD_UIC_PWR_MASK (UIC_HIBERNATE_ENTER |\ + UIC_HIBERNATE_EXIT |\ + UIC_POWER_MODE) + +#define UFSHCD_UIC_MASK (UIC_COMMAND_COMPL | UFSHCD_UIC_PWR_MASK) #define UFSHCD_ERROR_MASK (UIC_ERROR |\ DEVICE_FATAL_ERROR |\ @@ -210,7 +213,7 @@ enum { #define UIC_GET_ATTR_ID(v) (((v) >> 16) & 0xFFFF) /* UIC Commands */ -enum { +enum uic_cmd_dme { UIC_CMD_DME_GET = 0x01, UIC_CMD_DME_SET = 0x02, UIC_CMD_DME_PEER_GET = 0x03, |