summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/frv/kernel/setup.c1
-rw-r--r--arch/ia64/kernel/setup.c1
-rw-r--r--arch/mips/cobalt/setup.c1
-rw-r--r--arch/mips/lasat/setup.c1
-rw-r--r--drivers/char/pcmcia/synclink_cs.c1
-rw-r--r--drivers/char/synclink.c1
-rw-r--r--drivers/serial/8250.c35
-rw-r--r--drivers/serial/8250_pci.c4
-rw-r--r--drivers/serial/8250_pnp.c13
-rw-r--r--drivers/serial/m32r_sio.c5
-rw-r--r--drivers/serial/serial_core.c18
-rw-r--r--drivers/serial/serial_cs.c292
-rw-r--r--drivers/serial/serial_txx9.c2
-rw-r--r--include/linux/serial_core.h3
14 files changed, 270 insertions, 108 deletions
diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
index d96a57e5f03..a8c61dac1ce 100644
--- a/arch/frv/kernel/setup.c
+++ b/arch/frv/kernel/setup.c
@@ -31,7 +31,6 @@
#include <linux/serial_reg.h>
#include <asm/setup.h>
-#include <asm/serial.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/pgalloc.h>
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 84f93c0f2c6..c4caa800349 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -54,7 +54,6 @@
#include <asm/processor.h>
#include <asm/sal.h>
#include <asm/sections.h>
-#include <asm/serial.h>
#include <asm/setup.h>
#include <asm/smp.h>
#include <asm/system.h>
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index c01a0170e59..0b347cffc76 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -23,7 +23,6 @@
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/serial.h>
#include <asm/mach-cobalt/cobalt.h>
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index 0ffc43c600d..14c55168f1f 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -34,7 +34,6 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
-#include <asm/serial.h>
#include <asm/lasat/lasat.h>
#include <asm/lasat/serial.h>
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index dd845cbefe9..d1ecb2c6de9 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -57,7 +57,6 @@
#include <linux/netdevice.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c
index 244dc308c77..38d94987de8 100644
--- a/drivers/char/synclink.c
+++ b/drivers/char/synclink.c
@@ -87,7 +87,6 @@
#include <linux/vmalloc.h>
#include <linux/init.h>
-#include <asm/serial.h>
#include <linux/delay.h>
#include <linux/ioctl.h>
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 10c2daab99a..cc2a205d423 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1896,6 +1896,17 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
serial_outp(up, UART_EFR, efr);
}
+#ifdef CONFIG_ARCH_OMAP15XX
+ /* Workaround to enable 115200 baud on OMAP1510 internal ports */
+ if (cpu_is_omap1510() && is_omap_port((unsigned int)up->port.membase)) {
+ if (baud == 115200) {
+ quot = 1;
+ serial_out(up, UART_OMAP_OSC_12M_SEL, 1);
+ } else
+ serial_out(up, UART_OMAP_OSC_12M_SEL, 0);
+ }
+#endif
+
if (up->capabilities & UART_NATSEMI) {
/* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
serial_outp(up, UART_LCR, 0xe0);
@@ -1949,6 +1960,8 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
case UPIO_AU:
size = 0x100000;
/* fall thru */
+ case UPIO_TSI:
+ case UPIO_MEM32:
case UPIO_MEM:
if (!up->port.mapbase)
break;
@@ -1984,6 +1997,8 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
case UPIO_AU:
size = 0x100000;
/* fall thru */
+ case UPIO_TSI:
+ case UPIO_MEM32:
case UPIO_MEM:
if (!up->port.mapbase)
break;
@@ -2007,17 +2022,15 @@ static int serial8250_request_rsa_resource(struct uart_8250_port *up)
{
unsigned long start = UART_RSA_BASE << up->port.regshift;
unsigned int size = 8 << up->port.regshift;
- int ret = 0;
+ int ret = -EINVAL;
switch (up->port.iotype) {
- case UPIO_MEM:
- ret = -EINVAL;
- break;
-
case UPIO_HUB6:
case UPIO_PORT:
start += up->port.iobase;
- if (!request_region(start, size, "serial-rsa"))
+ if (request_region(start, size, "serial-rsa"))
+ ret = 0;
+ else
ret = -EBUSY;
break;
}
@@ -2031,9 +2044,6 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
unsigned int size = 8 << up->port.regshift;
switch (up->port.iotype) {
- case UPIO_MEM:
- break;
-
case UPIO_HUB6:
case UPIO_PORT:
release_region(up->port.iobase + offset, size);
@@ -2222,9 +2232,10 @@ static inline void wait_for_xmitr(struct uart_8250_port *up, int bits)
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
tmout = 1000000;
- while (--tmout &&
- ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
+ while (!(serial_in(up, UART_MSR) & UART_MSR_CTS) && --tmout) {
udelay(1);
+ touch_nmi_watchdog();
+ }
}
}
@@ -2397,7 +2408,6 @@ int __init early_serial_setup(struct uart_port *port)
/**
* serial8250_suspend_port - suspend one serial port
* @line: serial line number
- * @level: the level of port suspension, as per uart_suspend_port
*
* Suspend one serial port.
*/
@@ -2409,7 +2419,6 @@ void serial8250_suspend_port(int line)
/**
* serial8250_resume_port - resume one serial port
* @line: serial line number
- * @level: the level of port resumption, as per uart_resume_port
*
* Resume one serial port.
*/
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 851e4839d6d..4d0ff8f4a01 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -1789,6 +1789,7 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev)
pci_disable_device(dev);
}
+#ifdef CONFIG_PM
static int pciserial_suspend_one(struct pci_dev *dev, pm_message_t state)
{
struct serial_private *priv = pci_get_drvdata(dev);
@@ -1818,6 +1819,7 @@ static int pciserial_resume_one(struct pci_dev *dev)
}
return 0;
}
+#endif
static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960,
@@ -2375,8 +2377,10 @@ static struct pci_driver serial_pci_driver = {
.name = "serial",
.probe = pciserial_init_one,
.remove = __devexit_p(pciserial_remove_one),
+#ifdef CONFIG_PM
.suspend = pciserial_suspend_one,
.resume = pciserial_resume_one,
+#endif
.id_table = serial_pci_tbl,
};
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index 632f62d6ec7..71d907c8288 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -327,6 +327,19 @@ static const struct pnp_device_id pnp_dev_table[] = {
{ "WACF004", 0 },
{ "WACF005", 0 },
{ "WACF006", 0 },
+ /* Compaq touchscreen */
+ { "FPI2002", 0 },
+ /* Fujitsu Stylistic touchscreens */
+ { "FUJ02B2", 0 },
+ { "FUJ02B3", 0 },
+ /* Fujitsu Stylistic LT touchscreens */
+ { "FUJ02B4", 0 },
+ /* Passive Fujitsu Stylistic touchscreens */
+ { "FUJ02B6", 0 },
+ { "FUJ02B7", 0 },
+ { "FUJ02B8", 0 },
+ { "FUJ02B9", 0 },
+ { "FUJ02BC", 0 },
/* Rockwell's (PORALiNK) 33600 INT PNP */
{ "WCI0003", 0 },
/* Unkown PnP modems */
diff --git a/drivers/serial/m32r_sio.c b/drivers/serial/m32r_sio.c
index e7fe4bb46ec..28c9ce6f0bd 100644
--- a/drivers/serial/m32r_sio.c
+++ b/drivers/serial/m32r_sio.c
@@ -76,7 +76,7 @@
*/
#define is_real_interrupt(irq) ((irq) != 0)
-#include <asm/serial.h>
+#define BASE_BAUD 115200
/* Standard COM flags */
#define STD_COM_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST)
@@ -86,7 +86,6 @@
* standard enumeration mechanism. Platforms that can find all
* serial ports via mechanisms like ACPI or PCI need not supply it.
*/
-#undef SERIAL_PORT_DFNS
#if defined(CONFIG_PLAT_USRV)
#define SERIAL_PORT_DFNS \
@@ -109,7 +108,7 @@
#endif /* !CONFIG_PLAT_USRV */
static struct old_serial_port old_serial_port[] = {
- SERIAL_PORT_DFNS /* defined in asm/serial.h */
+ SERIAL_PORT_DFNS
};
#define UART_NR ARRAY_SIZE(old_serial_port)
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index de5e8930a6f..c67b05e9a45 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -792,6 +792,7 @@ static int uart_set_info(struct uart_state *state,
* We failed anyway.
*/
retval = -EBUSY;
+ goto exit; // Added to return the correct error -Ram Gupta
}
}
@@ -1662,16 +1663,16 @@ static int uart_line_info(char *buf, struct uart_driver *drv, int i)
struct uart_port *port = state->port;
char stat_buf[32];
unsigned int status;
- int ret;
+ int mmio, ret;
if (!port)
return 0;
+ mmio = port->iotype >= UPIO_MEM;
ret = sprintf(buf, "%d: uart:%s %s%08lX irq:%d",
port->line, uart_type(port),
- port->iotype == UPIO_MEM ? "mmio:0x" : "port:",
- port->iotype == UPIO_MEM ? port->mapbase :
- (unsigned long) port->iobase,
+ mmio ? "mmio:0x" : "port:",
+ mmio ? port->mapbase : (unsigned long) port->iobase,
port->irq);
if (port->type == PORT_UNKNOWN) {
@@ -1939,6 +1940,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
if (state->info && state->info->flags & UIF_INITIALIZED) {
const struct uart_ops *ops = port->ops;
+ state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
+ | UIF_SUSPENDED;
+
spin_lock_irq(&port->lock);
ops->stop_tx(port);
ops->set_mctrl(port, 0);
@@ -2005,7 +2009,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
console_start(port->cons);
}
- if (state->info && state->info->flags & UIF_INITIALIZED) {
+ if (state->info && state->info->flags & UIF_SUSPENDED) {
const struct uart_ops *ops = port->ops;
int ret;
@@ -2017,15 +2021,17 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
ops->set_mctrl(port, port->mctrl);
ops->start_tx(port);
spin_unlock_irq(&port->lock);
+ state->info->flags |= UIF_INITIALIZED;
} else {
/*
* Failed to resume - maybe hardware went away?
* Clear the "initialized" flag so we won't try
* to call the low level drivers shutdown method.
*/
- state->info->flags &= ~UIF_INITIALIZED;
uart_shutdown(state);
}
+
+ state->info->flags &= ~UIF_SUSPENDED;
}
mutex_unlock(&state->mutex);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index cbf260bc225..00f9ffd6948 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -80,23 +80,16 @@ module_param(buggy_uart, int, 0444);
/* Table of multi-port card ID's */
-struct multi_id {
- u_short manfid;
- u_short prodid;
+struct serial_quirk {
+ unsigned int manfid;
+ unsigned int prodid;
int multi; /* 1 = multifunction, > 1 = # ports */
+ void (*config)(struct pcmcia_device *);
+ void (*setup)(struct pcmcia_device *, struct uart_port *);
+ void (*wakeup)(struct pcmcia_device *);
+ int (*post)(struct pcmcia_device *);
};
-static const struct multi_id multi_id[] = {
- { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
- { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
- { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
- { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 },
- { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 },
- { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 },
- { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 }
-};
-#define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
-
struct serial_info {
struct pcmcia_device *p_dev;
int ndev;
@@ -107,6 +100,7 @@ struct serial_info {
int c950ctrl;
dev_node_t node[4];
int line[4];
+ const struct serial_quirk *quirk;
};
struct serial_cfg_mem {
@@ -115,37 +109,165 @@ struct serial_cfg_mem {
u_char buf[256];
};
+/*
+ * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
+ * manfid 0x0160, 0x0104
+ * This card appears to have a 14.7456MHz clock.
+ */
+static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
+{
+ port->uartclk = 14745600;
+}
-static int serial_config(struct pcmcia_device * link);
+static int quirk_post_ibm(struct pcmcia_device *link)
+{
+ conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
+ int last_ret, last_fn;
+ last_ret = pcmcia_access_configuration_register(link, &reg);
+ if (last_ret) {
+ last_fn = AccessConfigurationRegister;
+ goto cs_failed;
+ }
+ reg.Action = CS_WRITE;
+ reg.Value = reg.Value | 1;
+ last_ret = pcmcia_access_configuration_register(link, &reg);
+ if (last_ret) {
+ last_fn = AccessConfigurationRegister;
+ goto cs_failed;
+ }
+ return 0;
-static void wakeup_card(struct serial_info *info)
+ cs_failed:
+ cs_error(link, last_fn, last_ret);
+ return -ENODEV;
+}
+
+/*
+ * Nokia cards are not really multiport cards. Shouldn't this
+ * be handled by setting the quirk entry .multi = 0 | 1 ?
+ */
+static void quirk_config_nokia(struct pcmcia_device *link)
{
- int ctrl = info->c950ctrl;
-
- if (info->manfid == MANFID_OXSEMI) {
- outb(12, ctrl + 1);
- } else if (info->manfid == MANFID_POSSIO && info->prodid == PRODID_POSSIO_GCC) {
- /* request_region? oxsemi branch does no request_region too... */
- /* This sequence is needed to properly initialize MC45 attached to OXCF950.
- * I tried decreasing these msleep()s, but it worked properly (survived
- * 1000 stop/start operations) with these timeouts (or bigger). */
- outb(0xA, ctrl + 1);
- msleep(100);
- outb(0xE, ctrl + 1);
- msleep(300);
- outb(0xC, ctrl + 1);
- msleep(100);
- outb(0xE, ctrl + 1);
- msleep(200);
- outb(0xF, ctrl + 1);
- msleep(100);
- outb(0xE, ctrl + 1);
- msleep(100);
- outb(0xC, ctrl + 1);
+ struct serial_info *info = link->priv;
+
+ if (info->multi > 1)
+ info->multi = 1;
+}
+
+static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+
+ outb(12, info->c950ctrl + 1);
+}
+
+/* request_region? oxsemi branch does no request_region too... */
+/*
+ * This sequence is needed to properly initialize MC45 attached to OXCF950.
+ * I tried decreasing these msleep()s, but it worked properly (survived
+ * 1000 stop/start operations) with these timeouts (or bigger).
+ */
+static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+ unsigned int ctrl = info->c950ctrl;
+
+ outb(0xA, ctrl + 1);
+ msleep(100);
+ outb(0xE, ctrl + 1);
+ msleep(300);
+ outb(0xC, ctrl + 1);
+ msleep(100);
+ outb(0xE, ctrl + 1);
+ msleep(200);
+ outb(0xF, ctrl + 1);
+ msleep(100);
+ outb(0xE, ctrl + 1);
+ msleep(100);
+ outb(0xC, ctrl + 1);
+}
+
+/*
+ * Socket Dual IO: this enables irq's for second port
+ */
+static void quirk_config_socket(struct pcmcia_device *link)
+{
+ struct serial_info *info = link->priv;
+
+ if (info->multi) {
+ link->conf.Present |= PRESENT_EXT_STATUS;
+ link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
}
}
+static const struct serial_quirk quirks[] = {
+ {
+ .manfid = 0x0160,
+ .prodid = 0x0104,
+ .multi = -1,
+ .setup = quirk_setup_brainboxes_0104,
+ }, {
+ .manfid = MANFID_IBM,
+ .prodid = ~0,
+ .multi = -1,
+ .post = quirk_post_ibm,
+ }, {
+ .manfid = MANFID_INTEL,
+ .prodid = PRODID_INTEL_DUAL_RS232,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_NATINST,
+ .prodid = PRODID_NATINST_QUAD_RS232,
+ .multi = 4,
+ }, {
+ .manfid = MANFID_NOKIA,
+ .prodid = ~0,
+ .multi = -1,
+ .config = quirk_config_nokia,
+ }, {
+ .manfid = MANFID_OMEGA,
+ .prodid = PRODID_OMEGA_QSP_100,
+ .multi = 4,
+ }, {
+ .manfid = MANFID_OXSEMI,
+ .prodid = ~0,
+ .multi = -1,
+ .wakeup = quirk_wakeup_oxsemi,
+ }, {
+ .manfid = MANFID_POSSIO,
+ .prodid = PRODID_POSSIO_GCC,
+ .multi = -1,
+ .wakeup = quirk_wakeup_possio_gcc,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_DUAL_RS232,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_DUAL_RS232_D1,
+ .multi = 2,
+ }, {
+ .manfid = MANFID_QUATECH,
+ .prodid = PRODID_QUATECH_QUAD_RS232,
+ .multi = 4,
+ }, {
+ .manfid = MANFID_SOCKET,
+ .prodid = PRODID_SOCKET_DUAL_RS232,
+ .multi = 2,
+ .config = quirk_config_socket,
+ }, {
+ .manfid = MANFID_SOCKET,
+ .prodid = ~0,
+ .multi = -1,
+ .config = quirk_config_socket,
+ }
+};
+
+
+static int serial_config(struct pcmcia_device * link);
+
+
/*======================================================================
After a card is removed, serial_remove() will unregister
@@ -185,14 +307,14 @@ static int serial_suspend(struct pcmcia_device *link)
static int serial_resume(struct pcmcia_device *link)
{
- if (pcmcia_dev_present(link)) {
- struct serial_info *info = link->priv;
- int i;
+ struct serial_info *info = link->priv;
+ int i;
- for (i = 0; i < info->ndev; i++)
- serial8250_resume_port(info->line[i]);
- wakeup_card(info);
- }
+ for (i = 0; i < info->ndev; i++)
+ serial8250_resume_port(info->line[i]);
+
+ if (info->quirk && info->quirk->wakeup)
+ info->quirk->wakeup(link);
return 0;
}
@@ -278,6 +400,10 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
port.dev = &handle_to_dev(handle);
if (buggy_uart)
port.flags |= UPF_BUGGY_UART;
+
+ if (info->quirk && info->quirk->setup)
+ info->quirk->setup(handle, &port);
+
line = serial8250_register_port(&port);
if (line < 0) {
printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
@@ -433,6 +559,13 @@ next_entry:
}
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
+
+ /*
+ * Apply any configuration quirks.
+ */
+ if (info->quirk && info->quirk->config)
+ info->quirk->config(link);
+
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
@@ -521,11 +654,13 @@ static int multi_config(struct pcmcia_device * link)
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
- /* Socket Dual IO: this enables irq's for second port */
- if (info->multi && (info->manfid == MANFID_SOCKET)) {
- link->conf.Present |= PRESENT_EXT_STATUS;
- link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
- }
+
+ /*
+ * Apply any configuration quirks.
+ */
+ if (info->quirk && info->quirk->config)
+ info->quirk->config(link);
+
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
@@ -550,17 +685,19 @@ static int multi_config(struct pcmcia_device * link)
link->irq.AssignedIRQ);
}
info->c950ctrl = base2;
- wakeup_card(info);
+
+ /*
+ * FIXME: We really should wake up the port prior to
+ * handing it over to the serial layer.
+ */
+ if (info->quirk && info->quirk->wakeup)
+ info->quirk->wakeup(link);
+
rc = 0;
goto free_cfg_mem;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
- /* The Nokia cards are not really multiport cards */
- if (info->manfid == MANFID_NOKIA) {
- rc = 0;
- goto free_cfg_mem;
- }
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
@@ -622,13 +759,16 @@ static int serial_config(struct pcmcia_device * link)
tuple->DesiredTuple = CISTPL_MANFID;
if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
info->manfid = parse->manfid.manf;
- info->prodid = le16_to_cpu(buf[1]);
- for (i = 0; i < MULTI_COUNT; i++)
- if ((info->manfid == multi_id[i].manfid) &&
- (parse->manfid.card == multi_id[i].prodid))
+ info->prodid = parse->manfid.card;
+
+ for (i = 0; i < ARRAY_SIZE(quirks); i++)
+ if ((quirks[i].manfid == ~0 ||
+ quirks[i].manfid == info->manfid) &&
+ (quirks[i].prodid == ~0 ||
+ quirks[i].prodid == info->prodid)) {
+ info->quirk = &quirks[i];
break;
- if (i < MULTI_COUNT)
- info->multi = multi_id[i].multi;
+ }
}
/* Another check for dual-serial cards: look for either serial or
@@ -648,6 +788,12 @@ static int serial_config(struct pcmcia_device * link)
}
}
+ /*
+ * Apply any multi-port quirk.
+ */
+ if (info->quirk && info->quirk->multi != -1)
+ info->multi = info->quirk->multi;
+
if (info->multi > 1)
multi_config(link);
else
@@ -656,21 +802,13 @@ static int serial_config(struct pcmcia_device * link)
if (info->ndev == 0)
goto failed;
- if (info->manfid == MANFID_IBM) {
- conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
- last_ret = pcmcia_access_configuration_register(link, &reg);
- if (last_ret) {
- last_fn = AccessConfigurationRegister;
- goto cs_failed;
- }
- reg.Action = CS_WRITE;
- reg.Value = reg.Value | 1;
- last_ret = pcmcia_access_configuration_register(link, &reg);
- if (last_ret) {
- last_fn = AccessConfigurationRegister;
- goto cs_failed;
- }
- }
+ /*
+ * Apply any post-init quirk. FIXME: This should really happen
+ * before we register the port, since it might already be in use.
+ */
+ if (info->quirk && info->quirk->post)
+ if (info->quirk->post(link))
+ goto failed;
link->dev_node = &info->node[0];
kfree(cfg_mem);
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index b361669f85a..ebd8d2bb17f 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -990,7 +990,6 @@ int __init early_serial_txx9_setup(struct uart_port *port)
/**
* serial_txx9_suspend_port - suspend one serial port
* @line: serial line number
- * @level: the level of port suspension, as per uart_suspend_port
*
* Suspend one serial port.
*/
@@ -1002,7 +1001,6 @@ static void serial_txx9_suspend_port(int line)
/**
* serial_txx9_resume_port - resume one serial port
* @line: serial line number
- * @level: the level of port resumption, as per uart_resume_port
*
* Resume one serial port.
*/
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 86501a3de2a..de2e68159d9 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -319,6 +319,7 @@ struct uart_info {
#define UIF_CTS_FLOW ((__force uif_t) (1 << 26))
#define UIF_NORMAL_ACTIVE ((__force uif_t) (1 << 29))
#define UIF_INITIALIZED ((__force uif_t) (1 << 31))
+#define UIF_SUSPENDED ((__force uif_t) (1 << 30))
int blocked_open;
@@ -414,7 +415,7 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch,
#ifdef SUPPORT_SYSRQ
if (port->sysrq) {
if (ch && time_before(jiffies, port->sysrq)) {
- handle_sysrq(ch, regs, NULL);
+ handle_sysrq(ch, regs, port->info->tty);
port->sysrq = 0;
return 1;
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 09:19:36 +0000