diff options
| -rw-r--r-- | drivers/phy/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/phy/phy-berlin-sata.c | 284 |
3 files changed, 292 insertions, 0 deletions
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 261ad18854c..1704fd4be99 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,13 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config PHY_BERLIN_SATA + tristate "Marvell Berlin SATA PHY driver" + depends on ARCH_BERLIN && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the SATA PHY on Marvell Berlin SoCs. + config PHY_EXYNOS_MIPI_VIDEO tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" depends on HAS_IOMEM diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a4819d37861..3c2ad5915be 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c new file mode 100644 index 00000000000..c5e688b0899 --- /dev/null +++ b/drivers/phy/phy-berlin-sata.c @@ -0,0 +1,284 @@ +/* + * Marvell Berlin SATA PHY driver + * + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Ténart <antoine.tenart@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/phy/phy.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#define HOST_VSA_ADDR 0x0 +#define HOST_VSA_DATA 0x4 +#define PORT_SCR_CTL 0x2c +#define PORT_VSR_ADDR 0x78 +#define PORT_VSR_DATA 0x7c + +#define CONTROL_REGISTER 0x0 +#define MBUS_SIZE_CONTROL 0x4 + +#define POWER_DOWN_PHY0 BIT(6) +#define POWER_DOWN_PHY1 BIT(14) +#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16) +#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19) + +#define PHY_BASE 0x200 + +/* register 0x01 */ +#define REF_FREF_SEL_25 BIT(0) +#define PHY_MODE_SATA (0x0 << 5) + +/* register 0x02 */ +#define USE_MAX_PLL_RATE BIT(12) + +/* register 0x23 */ +#define DATA_BIT_WIDTH_10 (0x0 << 10) +#define DATA_BIT_WIDTH_20 (0x1 << 10) +#define DATA_BIT_WIDTH_40 (0x2 << 10) + +/* register 0x25 */ +#define PHY_GEN_MAX_1_5 (0x0 << 10) +#define PHY_GEN_MAX_3_0 (0x1 << 10) +#define PHY_GEN_MAX_6_0 (0x2 << 10) + +struct phy_berlin_desc { + struct phy *phy; + u32 power_bit; + unsigned index; +}; + +struct phy_berlin_priv { + void __iomem *base; + spinlock_t lock; + struct clk *clk; + struct phy_berlin_desc **phys; + unsigned nphys; +}; + +static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg, u32 reg, + u32 mask, u32 val) +{ + u32 regval; + + /* select register */ + writel(PHY_BASE + reg, ctrl_reg + PORT_VSR_ADDR); + + /* set bits */ + regval = readl(ctrl_reg + PORT_VSR_DATA); + regval &= ~mask; + regval |= val; + writel(regval, ctrl_reg + PORT_VSR_DATA); +} + +static int phy_berlin_sata_power_on(struct phy *phy) +{ + struct phy_berlin_desc *desc = phy_get_drvdata(phy); + struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent); + void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80); + int ret = 0; + u32 regval; + + clk_prepare_enable(priv->clk); + + spin_lock(&priv->lock); + + /* Power on PHY */ + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval &= ~desc->power_bit; + writel(regval, priv->base + HOST_VSA_DATA); + + /* Configure MBus */ + writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128; + writel(regval, priv->base + HOST_VSA_DATA); + + /* set PHY mode and ref freq to 25 MHz */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x1, 0xff, + REF_FREF_SEL_25 | PHY_MODE_SATA); + + /* set PHY up to 6 Gbps */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x25, 0xc00, PHY_GEN_MAX_6_0); + + /* set 40 bits width */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x23, 0xc00, DATA_BIT_WIDTH_40); + + /* use max pll rate */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x2, 0x0, USE_MAX_PLL_RATE); + + /* set Gen3 controller speed */ + regval = readl(ctrl_reg + PORT_SCR_CTL); + regval &= ~GENMASK(7, 4); + regval |= 0x30; + writel(regval, ctrl_reg + PORT_SCR_CTL); + + spin_unlock(&priv->lock); + + clk_disable_unprepare(priv->clk); + + return ret; +} + +static int phy_berlin_sata_power_off(struct phy *phy) +{ + struct phy_berlin_desc *desc = phy_get_drvdata(phy); + struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent); + u32 regval; + + clk_prepare_enable(priv->clk); + + spin_lock(&priv->lock); + + /* Power down PHY */ + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval |= desc->power_bit; + writel(regval, priv->base + HOST_VSA_DATA); + + spin_unlock(&priv->lock); + + clk_disable_unprepare(priv->clk); + + return 0; +} + +static struct phy *phy_berlin_sata_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct phy_berlin_priv *priv = dev_get_drvdata(dev); + int i; + + if (WARN_ON(args->args[0] >= priv->nphys)) + return ERR_PTR(-ENODEV); + + for (i = 0; i < priv->nphys; i++) { + if (priv->phys[i]->index == args->args[0]) + break; + } + + if (i == priv->nphys) + return ERR_PTR(-ENODEV); + + return priv->phys[i]->phy; +} + +static struct phy_ops phy_berlin_sata_ops = { + .power_on = phy_berlin_sata_power_on, + .power_off = phy_berlin_sata_power_off, + .owner = THIS_MODULE, +}; + +static u32 phy_berlin_power_down_bits[] = { + POWER_DOWN_PHY0, + POWER_DOWN_PHY1, +}; + +static int phy_berlin_sata_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *child; + struct phy *phy; + struct phy_provider *phy_provider; + struct phy_berlin_priv *priv; + struct resource *res; + int i = 0; + u32 phy_id; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + priv->base = devm_ioremap(dev, res->start, resource_size(res)); + if (!priv->base) + return -ENOMEM; + + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) + return PTR_ERR(priv->clk); + + priv->nphys = of_get_child_count(dev->of_node); + if (priv->nphys == 0) + return -ENODEV; + + priv->phys = devm_kzalloc(dev, priv->nphys * sizeof(*priv->phys), + GFP_KERNEL); + if (!priv->phys) + return -ENOMEM; + + dev_set_drvdata(dev, priv); + spin_lock_init(&priv->lock); + + for_each_available_child_of_node(dev->of_node, child) { + struct phy_berlin_desc *phy_desc; + + if (of_property_read_u32(child, "reg", &phy_id)) { + dev_err(dev, "missing reg property in node %s\n", + child->name); + return -EINVAL; + } + + if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) { + dev_err(dev, "invalid reg in node %s\n", child->name); + return -EINVAL; + } + + phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL); + if (!phy_desc) + return -ENOMEM; + + phy = devm_phy_create(dev, &phy_berlin_sata_ops, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", phy_id); + return PTR_ERR(phy); + } + + phy_desc->phy = phy; + phy_desc->power_bit = phy_berlin_power_down_bits[phy_id]; + phy_desc->index = phy_id; + phy_set_drvdata(phy, phy_desc); + + priv->phys[i++] = phy_desc; + + /* Make sure the PHY is off */ + phy_berlin_sata_power_off(phy); + } + + phy_provider = + devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static const struct of_device_id phy_berlin_sata_of_match[] = { + { .compatible = "marvell,berlin2q-sata-phy" }, + { }, +}; + +static struct platform_driver phy_berlin_sata_driver = { + .probe = phy_berlin_sata_probe, + .driver = { + .name = "phy-berlin-sata", + .owner = THIS_MODULE, + .of_match_table = phy_berlin_sata_of_match, + }, +}; +module_platform_driver(phy_berlin_sata_driver); + +MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver"); +MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>"); +MODULE_LICENSE("GPL v2"); |