summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--arch/arm/kernel/irq.c14
-rw-r--r--arch/arm/mach-omap1/serial.c3
-rw-r--r--arch/arm/mach-pxa/corgi.c7
-rw-r--r--arch/arm/mach-pxa/poodle.c7
-rw-r--r--arch/arm/mach-pxa/spitz.c7
-rw-r--r--arch/arm/mach-s3c2410/usb-simtec.c6
-rw-r--r--drivers/i2c/chips/tps65010.c11
-rw-r--r--drivers/input/keyboard/corgikbd.c6
-rw-r--r--drivers/input/keyboard/spitzkbd.c27
-rw-r--r--drivers/mfd/ucb1x00-core.c5
-rw-r--r--drivers/net/smc91x.c5
-rw-r--r--drivers/net/smc91x.h18
-rw-r--r--include/asm-arm/irq.h12
-rw-r--r--include/linux/signal.h13
14 files changed, 80 insertions, 61 deletions
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 869c466e625..b5645c4462c 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -684,8 +684,12 @@ int setup_irq(unsigned int irq, struct irqaction *new)
spin_lock_irqsave(&irq_controller_lock, flags);
p = &desc->action;
if ((old = *p) != NULL) {
- /* Can't share interrupts unless both agree to */
- if (!(old->flags & new->flags & SA_SHIRQ)) {
+ /*
+ * Can't share interrupts unless both agree to and are
+ * the same type.
+ */
+ if (!(old->flags & new->flags & SA_SHIRQ) ||
+ (~old->flags & new->flags) & SA_TRIGGER_MASK) {
spin_unlock_irqrestore(&irq_controller_lock, flags);
return -EBUSY;
}
@@ -705,6 +709,12 @@ int setup_irq(unsigned int irq, struct irqaction *new)
desc->running = 0;
desc->pending = 0;
desc->disable_depth = 1;
+
+ if (new->flags & SA_TRIGGER_MASK) {
+ unsigned int type = new->flags & SA_TRIGGER_MASK;
+ desc->chip->set_type(irq, type);
+ }
+
if (!desc->noautoenable) {
desc->disable_depth = 0;
desc->chip->unmask(irq);
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index fcfb81d13cf..7a68f098a02 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -252,9 +252,8 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
return;
}
omap_set_gpio_direction(gpio_nr, 1);
- set_irq_type(OMAP_GPIO_IRQ(gpio_nr), IRQT_RISING);
ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
- 0, "serial wakeup", NULL);
+ SA_TRIGGER_RISING, "serial wakeup", NULL);
if (ret) {
omap_free_gpio(gpio_nr);
printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 100fb31b515..5a7b873f29b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -213,15 +213,14 @@ static int corgi_mci_init(struct device *dev, irqreturn_t (*corgi_detect_int)(in
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int, SA_INTERRUPT,
- "MMC card detect", data);
+ err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
- set_irq_type(CORGI_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
return 0;
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index eef3de26ad3..663c9500598 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -146,15 +146,14 @@ static int poodle_mci_init(struct device *dev, irqreturn_t (*poodle_detect_int)(
poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int, SA_INTERRUPT,
- "MMC card detect", data);
+ err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
- set_irq_type(POODLE_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
return 0;
}
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f2007db0cda..a9eacc06555 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -296,15 +296,14 @@ static int spitz_mci_init(struct device *dev, irqreturn_t (*spitz_detect_int)(in
spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
- err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int, SA_INTERRUPT,
- "MMC card detect", data);
+ err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "MMC card detect", data);
if (err) {
printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
- set_irq_type(SPITZ_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
-
return 0;
}
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 5098b50158a..495f8c6ffcb 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -84,13 +84,13 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
int ret;
if (on) {
- ret = request_irq(IRQ_USBOC, usb_simtec_ocirq, SA_INTERRUPT,
+ ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+ SA_INTERRUPT | SA_TRIGGER_RISING |
+ SA_TRIGGER_FALLING,
"USB Over-current", info);
if (ret != 0) {
printk(KERN_ERR "failed to request usb oc irq\n");
}
-
- set_irq_type(IRQ_USBOC, IRQT_BOTHEDGE);
} else {
free_irq(IRQ_USBOC, info);
}
diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c
index e70b3db69ed..1af3dfbb808 100644
--- a/drivers/i2c/chips/tps65010.c
+++ b/drivers/i2c/chips/tps65010.c
@@ -494,6 +494,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
{
struct tps65010 *tps;
int status;
+ unsigned long irqflags;
if (the_tps) {
dev_dbg(&bus->dev, "only one %s for now\n", DRIVER_NAME);
@@ -520,13 +521,14 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
}
#ifdef CONFIG_ARM
+ irqflags = SA_SAMPLE_RANDOM | SA_TRIGGER_LOW;
if (machine_is_omap_h2()) {
tps->model = TPS65010;
omap_cfg_reg(W4_GPIO58);
tps->irq = OMAP_GPIO_IRQ(58);
omap_request_gpio(58);
omap_set_gpio_direction(58, 1);
- set_irq_type(tps->irq, IRQT_FALLING);
+ irqflags |= SA_TRIGGER_FALLING;
}
if (machine_is_omap_osk()) {
tps->model = TPS65010;
@@ -534,7 +536,7 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
tps->irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1));
omap_request_gpio(OMAP_MPUIO(1));
omap_set_gpio_direction(OMAP_MPUIO(1), 1);
- set_irq_type(tps->irq, IRQT_FALLING);
+ irqflags |= SA_TRIGGER_FALLING;
}
if (machine_is_omap_h3()) {
tps->model = TPS65013;
@@ -542,13 +544,12 @@ tps65010_probe(struct i2c_adapter *bus, int address, int kind)
// FIXME set up this board's IRQ ...
}
#else
-#define set_irq_type(num,trigger) do{}while(0)
+ irqflags = SA_SAMPLE_RANDOM;
#endif
if (tps->irq > 0) {
- set_irq_type(tps->irq, IRQT_LOW);
status = request_irq(tps->irq, tps65010_irq,
- SA_SAMPLE_RANDOM, DRIVER_NAME, tps);
+ irqflags, DRIVER_NAME, tps);
if (status < 0) {
dev_dbg(&tps->client.dev, "can't get IRQ %d, err %d\n",
tps->irq, status);
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 64672d49122..e301ee4ca26 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -19,7 +19,6 @@
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/irq.h>
#include <asm/arch/corgi.h>
#include <asm/arch/hardware.h>
@@ -343,10 +342,9 @@ static int __init corgikbd_probe(struct platform_device *pdev)
for (i = 0; i < CORGI_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(CORGI_GPIO_KEY_SENSE(i) | GPIO_IN);
if (request_irq(CORGI_IRQ_GPIO_KEY_SENSE(i), corgikbd_interrupt,
- SA_INTERRUPT, "corgikbd", corgikbd))
+ SA_INTERRUPT | SA_TRIGGER_RISING,
+ "corgikbd", corgikbd))
printk(KERN_WARNING "corgikbd: Can't get IRQ: %d!\n", i);
- else
- set_irq_type(CORGI_IRQ_GPIO_KEY_SENSE(i),IRQT_RISING);
}
/* Set Strobe lines as outputs - set high */
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 6a15fe3bc52..83999d58312 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -19,7 +19,6 @@
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/slab.h>
-#include <asm/irq.h>
#include <asm/arch/spitz.h>
#include <asm/arch/hardware.h>
@@ -407,10 +406,9 @@ static int __init spitzkbd_probe(struct platform_device *dev)
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i++) {
pxa_gpio_mode(spitz_senses[i] | GPIO_IN);
if (request_irq(IRQ_GPIO(spitz_senses[i]), spitzkbd_interrupt,
- SA_INTERRUPT, "Spitzkbd Sense", spitzkbd))
+ SA_INTERRUPT|SA_TRIGGER_RISING,
+ "Spitzkbd Sense", spitzkbd))
printk(KERN_WARNING "spitzkbd: Can't get Sense IRQ: %d!\n", i);
- else
- set_irq_type(IRQ_GPIO(spitz_senses[i]),IRQT_RISING);
}
/* Set Strobe lines as outputs - set high */
@@ -422,15 +420,18 @@ static int __init spitzkbd_probe(struct platform_device *dev)
pxa_gpio_mode(SPITZ_GPIO_SWA | GPIO_IN);
pxa_gpio_mode(SPITZ_GPIO_SWB | GPIO_IN);
- request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd Sync", spitzkbd);
- request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt, SA_INTERRUPT, "Spitzkbd PwrOn", spitzkbd);
- request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWA", spitzkbd);
- request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr, SA_INTERRUPT, "Spitzkbd SWB", spitzkbd);
-
- set_irq_type(SPITZ_IRQ_GPIO_SYNC, IRQT_BOTHEDGE);
- set_irq_type(SPITZ_IRQ_GPIO_ON_KEY, IRQT_BOTHEDGE);
- set_irq_type(SPITZ_IRQ_GPIO_SWA, IRQT_BOTHEDGE);
- set_irq_type(SPITZ_IRQ_GPIO_SWB, IRQT_BOTHEDGE);
+ request_irq(SPITZ_IRQ_GPIO_SYNC, spitzkbd_interrupt,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "Spitzkbd Sync", spitzkbd);
+ request_irq(SPITZ_IRQ_GPIO_ON_KEY, spitzkbd_interrupt,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "Spitzkbd PwrOn", spitzkbd);
+ request_irq(SPITZ_IRQ_GPIO_SWA, spitzkbd_hinge_isr,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "Spitzkbd SWA", spitzkbd);
+ request_irq(SPITZ_IRQ_GPIO_SWB, spitzkbd_hinge_isr,
+ SA_INTERRUPT | SA_TRIGGER_RISING | SA_TRIGGER_FALLING,
+ "Spitzkbd SWB", spitzkbd);
printk(KERN_INFO "input: Spitz Keyboard Registered\n");
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
index e335d54c465..b42e0fbab59 100644
--- a/drivers/mfd/ucb1x00-core.c
+++ b/drivers/mfd/ucb1x00-core.c
@@ -27,7 +27,6 @@
#include <asm/dma.h>
#include <asm/hardware.h>
-#include <asm/irq.h>
#include "ucb1x00.h"
@@ -507,14 +506,14 @@ static int ucb1x00_probe(struct mcp *mcp)
goto err_free;
}
- ret = request_irq(ucb->irq, ucb1x00_irq, 0, "UCB1x00", ucb);
+ ret = request_irq(ucb->irq, ucb1x00_irq, SA_TRIGGER_RISING,
+ "UCB1x00", ucb);
if (ret) {
printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n",
ucb->irq, ret);
goto err_free;
}
- set_irq_type(ucb->irq, IRQT_RISING);
mcp_set_drvdata(mcp, ucb);
ret = class_device_register(&ucb->cdev);
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 28bf2e69eb5..7ec08127c9d 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -88,7 +88,6 @@ static const char version[] =
#include <linux/skbuff.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include "smc91x.h"
@@ -2007,12 +2006,10 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr)
}
/* Grab the IRQ */
- retval = request_irq(dev->irq, &smc_interrupt, 0, dev->name, dev);
+ retval = request_irq(dev->irq, &smc_interrupt, SMC_IRQ_FLAGS, dev->name, dev);
if (retval)
goto err_out;
- set_irq_type(dev->irq, SMC_IRQ_TRIGGER_TYPE);
-
#ifdef SMC_USE_PXA_DMA
{
int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 5c2824be4ee..e0efd1964e7 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -90,7 +90,7 @@
__l--; \
} \
} while (0)
-#define set_irq_type(irq, type)
+#define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_SA1100_PLEB)
/* We can only do 16-bit reads and writes in the static memory space. */
@@ -109,7 +109,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#define set_irq_type(irq, type) do {} while (0)
+#define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_SA1100_ASSABET)
@@ -185,11 +185,11 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#include <asm/mach-types.h>
#include <asm/arch/cpu.h>
-#define SMC_IRQ_TRIGGER_TYPE (( \
+#define SMC_IRQ_FLAGS (( \
machine_is_omap_h2() \
|| machine_is_omap_h3() \
|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
- ) ? IRQT_FALLING : IRQT_RISING)
+ ) ? SA_TRIGGER_FALLING : SA_TRIGGER_RISING)
#elif defined(CONFIG_SH_SH4202_MICRODEV)
@@ -209,7 +209,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
-#define set_irq_type(irq, type) do {} while(0)
+#define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_ISA)
@@ -237,7 +237,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
-#define set_irq_type(irq, type) do {} while(0)
+#define SMC_IRQ_FLAGS (0)
#define RPC_LSA_DEFAULT RPC_LED_TX_RX
#define RPC_LSB_DEFAULT RPC_LED_100_10
@@ -319,7 +319,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
au_writew(*_p++ , _a); \
} while(0)
-#define set_irq_type(irq, type) do {} while (0)
+#define SMC_IRQ_FLAGS (0)
#else
@@ -342,8 +342,8 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
#endif
-#ifndef SMC_IRQ_TRIGGER_TYPE
-#define SMC_IRQ_TRIGGER_TYPE IRQT_RISING
+#ifndef SMC_IRQ_FLAGS
+#define SMC_IRQ_FLAGS SA_TRIGGER_RISING
#endif
#ifdef SMC_USE_PXA_DMA
diff --git a/include/asm-arm/irq.h b/include/asm-arm/irq.h
index 59975ee43cf..7772432d3fd 100644
--- a/include/asm-arm/irq.h
+++ b/include/asm-arm/irq.h
@@ -25,10 +25,14 @@ extern void disable_irq_nosync(unsigned int);
extern void disable_irq(unsigned int);
extern void enable_irq(unsigned int);
-#define __IRQT_FALEDGE (1 << 0)
-#define __IRQT_RISEDGE (1 << 1)
-#define __IRQT_LOWLVL (1 << 2)
-#define __IRQT_HIGHLVL (1 << 3)
+/*
+ * These correspond with the SA_TRIGGER_* defines, and therefore the
+ * IRQRESOURCE_IRQ_* defines.
+ */
+#define __IRQT_RISEDGE (1 << 0)
+#define __IRQT_FALEDGE (1 << 1)
+#define __IRQT_HIGHLVL (1 << 2)
+#define __IRQT_LOWLVL (1 << 3)
#define IRQT_NOEDGE (0)
#define IRQT_RISING (__IRQT_RISEDGE)
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 5dd5f02c5c5..ea9eff16c4b 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -18,6 +18,19 @@
#define SA_PROBE SA_ONESHOT
#define SA_SAMPLE_RANDOM SA_RESTART
#define SA_SHIRQ 0x04000000
+/*
+ * As above, these correspond to the IORESOURCE_IRQ_* defines in
+ * linux/ioport.h to select the interrupt line behaviour. When
+ * requesting an interrupt without specifying a SA_TRIGGER, the
+ * setting should be assumed to be "as already configured", which
+ * may be as per machine or firmware initialisation.
+ */
+#define SA_TRIGGER_LOW 0x00000008
+#define SA_TRIGGER_HIGH 0x00000004
+#define SA_TRIGGER_FALLING 0x00000002
+#define SA_TRIGGER_RISING 0x00000001
+#define SA_TRIGGER_MASK (SA_TRIGGER_HIGH|SA_TRIGGER_LOW|\
+ SA_TRIGGER_RISING|SA_TRIGGER_FALLING)
/*
* Real Time signals may be queued.