diff options
-rw-r--r-- | arch/arm/mach-at91/board-foxg20.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-at91/board-stamp9g20.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-ixp4xx/vulcan-setup.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-pxa/raumfeld.c | 1 | ||||
-rw-r--r-- | drivers/w1/masters/w1-gpio.c | 6 | ||||
-rw-r--r-- | drivers/w1/w1.c | 3 | ||||
-rw-r--r-- | init/Kconfig | 4 |
7 files changed, 10 insertions, 7 deletions
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 2ea7059b840..c20a870ea9c 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -176,6 +176,7 @@ static struct w1_gpio_platform_data w1_gpio_pdata = { /* If you choose to use a pin other than PB16 it needs to be 3.3V */ .pin = AT91_PIN_PB16, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index a033b8df9fb..869cbecf00b 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -188,6 +188,7 @@ static struct spi_board_info portuxg20_spi_devices[] = { static struct w1_gpio_platform_data w1_gpio_pdata = { .pin = AT91_PIN_PA29, .is_open_drain = 1, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device w1_device = { diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index d42730a1d4a..d599e354ca5 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -163,6 +163,7 @@ static struct platform_device vulcan_max6369 = { static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = { .pin = 14, + .ext_pullup_enable_pin = -EINVAL, }; static struct platform_device vulcan_w1_gpio = { diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index af41888acbd..969b0ba7fa7 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -505,6 +505,7 @@ static struct w1_gpio_platform_data w1_gpio_platform_data = { .pin = GPIO_ONE_WIRE, .is_open_drain = 0, .enable_external_pullup = w1_enable_external_pullup, + .ext_pullup_enable_pin = -EINVAL, }; struct platform_device raumfeld_w1_gpio_device = { diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c index d39dfa4cc23..46d97014342 100644 --- a/drivers/w1/masters/w1-gpio.c +++ b/drivers/w1/masters/w1-gpio.c @@ -47,11 +47,13 @@ static u8 w1_gpio_read_bit(void *data) return gpio_get_value(pdata->pin) ? 1 : 0; } +#if defined(CONFIG_OF) static struct of_device_id w1_gpio_dt_ids[] = { { .compatible = "w1-gpio" }, {} }; MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids); +#endif static int w1_gpio_probe_dt(struct platform_device *pdev) { @@ -158,7 +160,7 @@ static int w1_gpio_probe(struct platform_device *pdev) return err; } -static int __exit w1_gpio_remove(struct platform_device *pdev) +static int w1_gpio_remove(struct platform_device *pdev) { struct w1_bus_master *master = platform_get_drvdata(pdev); struct w1_gpio_platform_data *pdata = pdev->dev.platform_data; @@ -210,7 +212,7 @@ static struct platform_driver w1_gpio_driver = { .of_match_table = of_match_ptr(w1_gpio_dt_ids), }, .probe = w1_gpio_probe, - .remove = __exit_p(w1_gpio_remove), + .remove = w1_gpio_remove, .suspend = w1_gpio_suspend, .resume = w1_gpio_resume, }; diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c index 7994d933f04..7ce277d2bb6 100644 --- a/drivers/w1/w1.c +++ b/drivers/w1/w1.c @@ -924,7 +924,8 @@ void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb tmp64 = (triplet_ret >> 2); rn |= (tmp64 << i); - if (kthread_should_stop()) { + /* ensure we're called from kthread and not by netlink callback */ + if (!dev->priv && kthread_should_stop()) { mutex_unlock(&dev->bus_mutex); dev_dbg(&dev->dev, "Abort w1_search\n"); return; diff --git a/init/Kconfig b/init/Kconfig index 22616cd434b..5341d7232c3 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -28,10 +28,6 @@ config BUILDTIME_EXTABLE_SORT menu "General setup" -config EXPERIMENTAL - bool - default y - config BROKEN bool |