summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--drivers/net/ixgbe/ixgbe_main.c28
1 files changed, 26 insertions, 2 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 01d8b6b12be..4a316e9c054 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2458,6 +2458,17 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
ixgbe_irq_enable(adapter);
/*
+ * If this adapter has a fan, check to see if we had a failure
+ * before we enabled the interrupt.
+ */
+ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ DPRINTK(DRV, CRIT,
+ "Fan has stopped, replace the adapter\n");
+ }
+
+ /*
* For hot-pluggable SFP+ devices, a new SFP+ module may have
* arrived before interrupts were enabled. We need to kick off
* the SFP+ module setup first, then try to bring up link.
@@ -3382,9 +3393,11 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->ring_feature[RING_F_RSS].indices = rss;
adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES;
- if (hw->mac.type == ixgbe_mac_82598EB)
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ if (hw->device_id == IXGBE_DEV_ID_82598AT)
+ adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
- else if (hw->mac.type == ixgbe_mac_82599EB) {
+ } else if (hw->mac.type == ixgbe_mac_82599EB) {
adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
adapter->flags |= IXGBE_FLAG_RSC_CAPABLE;
adapter->flags |= IXGBE_FLAG_RSC_ENABLED;
@@ -4915,6 +4928,17 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
if (err)
goto err_sw_init;
+ /*
+ * If there is a fan on this device and it has failed log the
+ * failure.
+ */
+ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ DPRINTK(PROBE, CRIT,
+ "Fan has stopped, replace the adapter\n");
+ }
+
/* reset_hw fills in the perm_addr as well */
err = hw->mac.ops.reset_hw(hw);
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {