diff options
-rw-r--r-- | drivers/net/wireless/rtl818x/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187.h | 1 | ||||
-rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187_dev.c | 28 | ||||
-rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187_leds.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187_rfkill.c | 63 | ||||
-rw-r--r-- | drivers/net/wireless/rtl818x/rtl8187_rfkill.h | 8 | ||||
-rw-r--r-- | drivers/net/wireless/rtl818x/rtl818x.h | 5 |
7 files changed, 94 insertions, 17 deletions
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile index 37e3d4db0c4..93cbfbedb46 100644 --- a/drivers/net/wireless/rtl818x/Makefile +++ b/drivers/net/wireless/rtl818x/Makefile @@ -1,5 +1,5 @@ rtl8180-objs := rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o -rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o +rtl8187-objs := rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o rtl8187_rfkill.o obj-$(CONFIG_RTL8180) += rtl8180.o obj-$(CONFIG_RTL8187) += rtl8187.o diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h index c09bfefc70f..bf9175a8c1f 100644 --- a/drivers/net/wireless/rtl818x/rtl8187.h +++ b/drivers/net/wireless/rtl818x/rtl8187.h @@ -133,6 +133,7 @@ struct rtl8187_priv { __le16 bits16; __le32 bits32; } *io_dmabuf; + bool rfkill_off; }; void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data); diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 5573e347680..9679b29e1c4 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -32,6 +32,7 @@ #ifdef CONFIG_RTL8187_LEDS #include "rtl8187_leds.h" #endif +#include "rtl8187_rfkill.h" MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>"); MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>"); @@ -648,10 +649,10 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev) /* setup card */ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); - rtl818x_iowrite8(priv, &priv->map->GPIO, 0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); - rtl818x_iowrite8(priv, &priv->map->GPIO, 1); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 1); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG); @@ -674,11 +675,11 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev) /* host_usb_init */ rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0); - rtl818x_iowrite8(priv, &priv->map->GPIO, 0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0); reg = rtl818x_ioread8(priv, (u8 *)0xFE53); rtl818x_iowrite8(priv, (u8 *)0xFE53, reg | (1 << 7)); rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, (4 << 8)); - rtl818x_iowrite8(priv, &priv->map->GPIO, 0x20); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x20); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0); rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x80); rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x80); @@ -907,12 +908,12 @@ static int rtl8187_start(struct ieee80211_hw *dev) u32 reg; int ret; + mutex_lock(&priv->conf_mutex); + ret = (!priv->is_rtl8187b) ? rtl8187_init_hw(dev) : rtl8187b_init_hw(dev); if (ret) - return ret; - - mutex_lock(&priv->conf_mutex); + goto rtl8187_start_exit; init_usb_anchor(&priv->anchored); priv->dev = dev; @@ -939,8 +940,7 @@ static int rtl8187_start(struct ieee80211_hw *dev) (7 << 21 /* MAX TX DMA */)); rtl8187_init_urbs(dev); rtl8187b_init_status_urb(dev); - mutex_unlock(&priv->conf_mutex); - return 0; + goto rtl8187_start_exit; } rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0xFFFF); @@ -984,9 +984,10 @@ static int rtl8187_start(struct ieee80211_hw *dev) reg |= RTL818X_CMD_RX_ENABLE; rtl818x_iowrite8(priv, &priv->map->CMD, reg); INIT_DELAYED_WORK(&priv->work, rtl8187_work); - mutex_unlock(&priv->conf_mutex); - return 0; +rtl8187_start_exit: + mutex_unlock(&priv->conf_mutex); + return ret; } static void rtl8187_stop(struct ieee80211_hw *dev) @@ -1277,7 +1278,8 @@ static const struct ieee80211_ops rtl8187_ops = { .bss_info_changed = rtl8187_bss_info_changed, .prepare_multicast = rtl8187_prepare_multicast, .configure_filter = rtl8187_configure_filter, - .conf_tx = rtl8187_conf_tx + .conf_tx = rtl8187_conf_tx, + .rfkill_poll = rtl8187_rfkill_poll }; static void rtl8187_eeprom_register_read(struct eeprom_93cx6 *eeprom) @@ -1517,6 +1519,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, reg &= 0xFF; rtl8187_leds_init(dev, reg); #endif + rtl8187_rfkill_init(dev); return 0; @@ -1540,6 +1543,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf) #ifdef CONFIG_RTL8187_LEDS rtl8187_leds_exit(dev); #endif + rtl8187_rfkill_exit(dev); ieee80211_unregister_hw(dev); priv = dev->priv; diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index a6cfb7e7799..a1c670fc155 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -42,7 +42,7 @@ static void led_turn_on(struct work_struct *work) mutex_lock(&priv->conf_mutex); switch (led->ledpin) { case LED_PIN_GPIO0: - rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00); break; case LED_PIN_LED0: @@ -80,7 +80,7 @@ static void led_turn_off(struct work_struct *work) mutex_lock(&priv->conf_mutex); switch (led->ledpin) { case LED_PIN_GPIO0: - rtl818x_iowrite8(priv, &priv->map->GPIO, 0x01); + rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01); rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01); break; case LED_PIN_LED0: diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c new file mode 100644 index 00000000000..9fab13e4004 --- /dev/null +++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c @@ -0,0 +1,63 @@ +/* + * Linux RFKILL support for RTL8187 + * + * Copyright (c) 2009 Herton Ronaldo Krzesinski <herton@mandriva.com.br> + * + * Based on the RFKILL handling in the r8187 driver, which is: + * Copyright (c) Realtek Semiconductor Corp. All rights reserved. + * + * Thanks to Realtek for their support! + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/usb.h> +#include <net/mac80211.h> + +#include "rtl8187.h" + +static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv) +{ + u8 gpio; + + gpio = rtl818x_ioread8(priv, &priv->map->GPIO0); + rtl818x_iowrite8(priv, &priv->map->GPIO0, gpio & ~0x02); + gpio = rtl818x_ioread8(priv, &priv->map->GPIO1); + + return gpio & 0x02; +} + +void rtl8187_rfkill_init(struct ieee80211_hw *hw) +{ + struct rtl8187_priv *priv = hw->priv; + + priv->rfkill_off = rtl8187_is_radio_enabled(priv); + printk(KERN_INFO "rtl8187: wireless switch is %s\n", + priv->rfkill_off ? "on" : "off"); + wiphy_rfkill_set_hw_state(hw->wiphy, !priv->rfkill_off); + wiphy_rfkill_start_polling(hw->wiphy); +} + +void rtl8187_rfkill_poll(struct ieee80211_hw *hw) +{ + bool enabled; + struct rtl8187_priv *priv = hw->priv; + + mutex_lock(&priv->conf_mutex); + enabled = rtl8187_is_radio_enabled(priv); + if (unlikely(enabled != priv->rfkill_off)) { + priv->rfkill_off = enabled; + printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n", + enabled ? "on" : "off"); + wiphy_rfkill_set_hw_state(hw->wiphy, !enabled); + } + mutex_unlock(&priv->conf_mutex); +} + +void rtl8187_rfkill_exit(struct ieee80211_hw *hw) +{ + wiphy_rfkill_stop_polling(hw->wiphy); +} diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.h b/drivers/net/wireless/rtl818x/rtl8187_rfkill.h new file mode 100644 index 00000000000..e12575e96d1 --- /dev/null +++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.h @@ -0,0 +1,8 @@ +#ifndef RTL8187_RFKILL_H +#define RTL8187_RFKILL_H + +void rtl8187_rfkill_init(struct ieee80211_hw *hw); +void rtl8187_rfkill_poll(struct ieee80211_hw *hw); +void rtl8187_rfkill_exit(struct ieee80211_hw *hw); + +#endif /* RTL8187_RFKILL_H */ diff --git a/drivers/net/wireless/rtl818x/rtl818x.h b/drivers/net/wireless/rtl818x/rtl818x.h index 562222e6cf1..8522490d2e2 100644 --- a/drivers/net/wireless/rtl818x/rtl818x.h +++ b/drivers/net/wireless/rtl818x/rtl818x.h @@ -138,8 +138,9 @@ struct rtl818x_csr { __le32 RF_PARA; __le32 RF_TIMING; u8 GP_ENABLE; - u8 GPIO; - u8 reserved_12[2]; + u8 GPIO0; + u8 GPIO1; + u8 reserved_12; __le32 HSSI_PARA; u8 reserved_13[4]; u8 TX_AGC_CTL; |