diff options
-rw-r--r-- | drivers/net/tulip/tulip_core.c | 162 |
1 files changed, 82 insertions, 80 deletions
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index da4fc458f90..e1a5f03a49c 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -41,7 +41,6 @@ static char version[] __devinitdata = "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n"; - /* A few user-configurable values. */ /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ @@ -326,7 +325,8 @@ static void tulip_up(struct net_device *dev) udelay(100); if (tulip_debug > 1) - printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq); + printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n", + dev->name, dev->irq); iowrite32(tp->rx_ring_dma, ioaddr + CSR3); iowrite32(tp->tx_ring_dma, ioaddr + CSR4); @@ -387,8 +387,9 @@ static void tulip_up(struct net_device *dev) (dev->if_port == 12 ? 0 : dev->if_port); for (i = 0; i < tp->mtable->leafcount; i++) if (tp->mtable->mleaf[i].media == looking_for) { - printk(KERN_INFO "%s: Using user-specified media %s.\n", - dev->name, medianame[dev->if_port]); + dev_info(&dev->dev, + "Using user-specified media %s\n", + medianame[dev->if_port]); goto media_picked; } } @@ -396,8 +397,9 @@ static void tulip_up(struct net_device *dev) int looking_for = tp->mtable->defaultmedia & MEDIA_MASK; for (i = 0; i < tp->mtable->leafcount; i++) if (tp->mtable->mleaf[i].media == looking_for) { - printk(KERN_INFO "%s: Using EEPROM-set media %s.\n", - dev->name, medianame[looking_for]); + dev_info(&dev->dev, + "Using EEPROM-set media %s\n", + medianame[looking_for]); goto media_picked; } } @@ -424,9 +426,10 @@ media_picked: if (tp->mii_cnt) { tulip_select_media(dev, 1); if (tulip_debug > 1) - printk(KERN_INFO "%s: Using MII transceiver %d, status " - "%4.4x.\n", - dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1)); + dev_info(&dev->dev, + "Using MII transceiver %d, status %04x\n", + tp->phys[0], + tulip_mdio_read(dev, tp->phys[0], 1)); iowrite32(csr6_mask_defstate, ioaddr + CSR6); tp->csr6 = csr6_mask_hdcap; dev->if_port = 11; @@ -490,9 +493,10 @@ media_picked: iowrite32(0, ioaddr + CSR2); /* Rx poll demand */ if (tulip_debug > 2) { - printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n", - dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5), - ioread32(ioaddr + CSR6)); + printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n", + dev->name, ioread32(ioaddr + CSR0), + ioread32(ioaddr + CSR5), + ioread32(ioaddr + CSR6)); } /* Set the timer to switch to check for link beat and perhaps switch @@ -540,27 +544,30 @@ static void tulip_tx_timeout(struct net_device *dev) if (tulip_media_cap[dev->if_port] & MediaIsMII) { /* Do nothing -- the media monitor should handle this. */ if (tulip_debug > 1) - printk(KERN_WARNING "%s: Transmit timeout using MII device.\n", - dev->name); + dev_warn(&dev->dev, + "Transmit timeout using MII device\n"); } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 || tp->chip_id == DM910X) { - printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, " - "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n", - dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), - ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15)); + dev_warn(&dev->dev, + "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n", + ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12), + ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), + ioread32(ioaddr + CSR15)); tp->timeout_recovery = 1; schedule_work(&tp->media_work); goto out_unlock; } else if (tp->chip_id == PNIC2) { - printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, " - "CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n", - dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6), - (int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12)); + dev_warn(&dev->dev, + "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n", + (int)ioread32(ioaddr + CSR5), + (int)ioread32(ioaddr + CSR6), + (int)ioread32(ioaddr + CSR7), + (int)ioread32(ioaddr + CSR12)); } else { - printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 " - "%8.8x, resetting...\n", - dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12)); + dev_warn(&dev->dev, + "Transmit timed out, status %08x, CSR12 %08x, resetting...\n", + ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12)); dev->if_port = 0; } @@ -570,26 +577,26 @@ static void tulip_tx_timeout(struct net_device *dev) for (i = 0; i < RX_RING_SIZE; i++) { u8 *buf = (u8 *)(tp->rx_ring[i].buffer1); int j; - printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x " - "%2.2x %2.2x %2.2x.\n", - i, (unsigned int)tp->rx_ring[i].status, - (unsigned int)tp->rx_ring[i].length, - (unsigned int)tp->rx_ring[i].buffer1, - (unsigned int)tp->rx_ring[i].buffer2, - buf[0], buf[1], buf[2]); + printk(KERN_DEBUG + "%2d: %08x %08x %08x %08x %02x %02x %02x\n", + i, + (unsigned int)tp->rx_ring[i].status, + (unsigned int)tp->rx_ring[i].length, + (unsigned int)tp->rx_ring[i].buffer1, + (unsigned int)tp->rx_ring[i].buffer2, + buf[0], buf[1], buf[2]); for (j = 0; buf[j] != 0xee && j < 1600; j++) if (j < 100) - printk(KERN_CONT " %2.2x", buf[j]); - printk(KERN_CONT " j=%d.\n", j); + pr_cont(" %02x", buf[j]); + pr_cont(" j=%d\n", j); } - printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring); + printk(KERN_DEBUG " Rx ring %08x: ", (int)tp->rx_ring); for (i = 0; i < RX_RING_SIZE; i++) - printk(KERN_CONT " %8.8x", - (unsigned int)tp->rx_ring[i].status); - printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring); + pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status); + printk(KERN_DEBUG " Tx ring %08x: ", (int)tp->tx_ring); for (i = 0; i < TX_RING_SIZE; i++) - printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status); - printk(KERN_CONT "\n"); + pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status); + pr_cont("\n"); } #endif @@ -832,8 +839,9 @@ static int tulip_close (struct net_device *dev) tulip_down (dev); if (tulip_debug > 1) - printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n", - dev->name, ioread32 (ioaddr + CSR5)); + dev_printk(KERN_DEBUG, &dev->dev, + "Shutting down ethercard, status was %02x\n", + ioread32 (ioaddr + CSR5)); free_irq (dev->irq, dev); @@ -1073,10 +1081,10 @@ static void set_rx_mode(struct net_device *dev) filterbit &= 0x3f; mc_filter[filterbit >> 5] |= 1 << (filterbit & 31); if (tulip_debug > 2) - printk(KERN_INFO "%s: Added filter for %pM" - " %8.8x bit %d.\n", - dev->name, mclist->dmi_addr, - ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit); + dev_info(&dev->dev, + "Added filter for %pM %08x bit %d\n", + mclist->dmi_addr, + ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit); } if (mc_filter[0] == tp->mc_filter[0] && mc_filter[1] == tp->mc_filter[1]) @@ -1288,9 +1296,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, unsigned int force_csr0 = 0; #ifndef MODULE - static int did_version; /* Already printed version info. */ - if (tulip_debug > 0 && did_version++ == 0) - printk (KERN_INFO "%s", version); + if (tulip_debug > 0) + printk_once(KERN_INFO "%s", version); #endif board_idx++; @@ -1301,7 +1308,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, */ if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) { - printk (KERN_ERR PFX "skipping LMC card.\n"); + pr_err(PFX "skipping LMC card\n"); return -ENODEV; } @@ -1317,15 +1324,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (pdev->vendor == 0x1282 && pdev->device == 0x9100 && pdev->revision < 0x30) { - printk(KERN_INFO PFX - "skipping early DM9100 with Crc bug (use dmfe)\n"); + pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); return -ENODEV; } dp = pci_device_to_OF_node(pdev); if (!(dp && of_get_property(dp, "local-mac-address", NULL))) { - printk(KERN_INFO PFX - "skipping DM910x expansion card (use dmfe)\n"); + pr_info(PFX "skipping DM910x expansion card (use dmfe)\n"); return -ENODEV; } } @@ -1372,9 +1377,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, i = pci_enable_device(pdev); if (i) { - printk (KERN_ERR PFX - "Cannot enable tulip board #%d, aborting\n", - board_idx); + pr_err(PFX "Cannot enable tulip board #%d, aborting\n", + board_idx); return i; } @@ -1383,22 +1387,22 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, /* alloc_etherdev ensures aligned and zeroed private structures */ dev = alloc_etherdev (sizeof (*tp)); if (!dev) { - printk (KERN_ERR PFX "ether device alloc failed, aborting\n"); + pr_err(PFX "ether device alloc failed, aborting\n"); return -ENOMEM; } SET_NETDEV_DEV(dev, &pdev->dev); if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) { - printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, " - "aborting\n", pci_name(pdev), - (unsigned long long)pci_resource_len (pdev, 0), - (unsigned long long)pci_resource_start (pdev, 0)); + pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n", + pci_name(pdev), + (unsigned long long)pci_resource_len (pdev, 0), + (unsigned long long)pci_resource_start (pdev, 0)); goto err_out_free_netdev; } /* grab all resources from both PIO and MMIO regions, as we * don't want anyone else messing around with our hardware */ - if (pci_request_regions (pdev, "tulip")) + if (pci_request_regions (pdev, DRV_NAME)) goto err_out_free_netdev; ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size); @@ -1611,8 +1615,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (dev->mem_start & MEDIA_MASK) tp->default_port = dev->mem_start & MEDIA_MASK; if (tp->default_port) { - printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n", - board_idx, medianame[tp->default_port & MEDIA_MASK]); + pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n", + board_idx, medianame[tp->default_port & MEDIA_MASK]); tp->medialock = 1; if (tulip_media_cap[tp->default_port] & MediaAlwaysFD) tp->full_duplex = 1; @@ -1627,7 +1631,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, } if (tp->flags & HAS_MEDIA_TABLE) { - sprintf(dev->name, "tulip%d", board_idx); /* hack */ + sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */ tulip_parse_eeprom(dev); strcpy(dev->name, "eth%d"); /* un-hack */ } @@ -1663,20 +1667,18 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, if (register_netdev(dev)) goto err_out_free_ring; - printk(KERN_INFO "%s: %s rev %d at " + pci_set_drvdata(pdev, dev); + + dev_info(&dev->dev, #ifdef CONFIG_TULIP_MMIO - "MMIO" + "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n", #else - "Port" + "%s rev %d at Port %#llx,%s %pM, IRQ %d\n", #endif - " %#llx,", dev->name, chip_name, pdev->revision, - (unsigned long long) pci_resource_start(pdev, TULIP_BAR)); - pci_set_drvdata(pdev, dev); - - if (eeprom_missing) - printk(" EEPROM not present,"); - printk(" %pM", dev->dev_addr); - printk(", IRQ %d.\n", irq); + chip_name, pdev->revision, + (unsigned long long)pci_resource_start(pdev, TULIP_BAR), + eeprom_missing ? " EEPROM not present," : "", + dev->dev_addr, irq); if (tp->chip_id == PNIC2) tp->link_change = pnic2_lnk_change; @@ -1799,12 +1801,12 @@ static int tulip_resume(struct pci_dev *pdev) return 0; if ((retval = pci_enable_device(pdev))) { - printk (KERN_ERR "tulip: pci_enable_device failed in resume\n"); + pr_err(PFX "pci_enable_device failed in resume\n"); return retval; } if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) { - printk (KERN_ERR "tulip: request_irq failed in resume\n"); + pr_err(PFX "request_irq failed in resume\n"); return retval; } @@ -1874,7 +1876,7 @@ static struct pci_driver tulip_driver = { static int __init tulip_init (void) { #ifdef MODULE - printk (KERN_INFO "%s", version); + pr_info("%s", version); #endif /* copy module parms into globals */ |