diff options
-rw-r--r-- | arch/arm/configs/mx3_defconfig | 46 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-kzm_arm11_01.c | 1 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-pcm038.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-qong.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-mxs/mach-mx23evk.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-mxs/mach-mx28evk.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-mxs/mach-tx28.c | 2 | ||||
-rw-r--r-- | arch/arm/plat-mxc/include/mach/mx27.h | 14 | ||||
-rw-r--r-- | arch/arm/plat-mxc/include/mach/mx31.h | 14 | ||||
-rw-r--r-- | drivers/mmc/host/mxcmmc.c | 1 |
10 files changed, 45 insertions, 46 deletions
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 7c4b30b3495..cb0717fbb03 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y CONFIG_SLAB=y CONFIG_MODULES=y @@ -13,20 +12,21 @@ CONFIG_MODVERSIONS=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y CONFIG_MACH_MX31ADS_WM1133_EV1=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y CONFIG_MACH_PCM037=y CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31LITE=y CONFIG_MACH_MX31_3DS=y CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_MX31LILLY=y CONFIG_MACH_QONG=y -CONFIG_MACH_PCM043=y CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_MX35_3DS=y CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y CONFIG_MACH_EUKREA_CPUIMX35=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y +CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y @@ -35,7 +35,6 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" CONFIG_VFP=y -CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_NET=y CONFIG_PACKET=y @@ -52,7 +51,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_FW_LOADER=m CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -62,24 +60,27 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y # CONFIG_BLK_DEV is not set +CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_NETDEVICES=y CONFIG_SMSC_PHY=y CONFIG_NET_ETHERNET=y CONFIG_SMSC911X=y CONFIG_DNET=y -CONFIG_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_IMX=y +# CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -89,12 +90,15 @@ CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_IMX2_WDT=y CONFIG_MFD_WM8350_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_WM8350=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -# CONFIG_VIDEO_ALLOW_V4L1 is not set +# CONFIG_RC_CORE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_MT9M001=y CONFIG_SOC_CAMERA_MT9M111=y @@ -105,9 +109,26 @@ CONFIG_SOC_CAMERA_OV772X=y CONFIG_VIDEO_MX3=y # CONFIG_RADIO_ADAPTERS is not set CONFIG_FB=y -# CONFIG_USB_SUPPORT is not set +CONFIG_SOUND=y +CONFIG_SND=y +# CONFIG_SND_ARM is not set +# CONFIG_SND_SPI is not set +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_MXC_SOC_WM1133_EV1=y +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_GADGET=m +CONFIG_USB_FSL_USB2=m +CONFIG_USB_G_SERIAL=m +CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_MXC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_MXC=y CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set CONFIG_TMPFS=y @@ -119,6 +140,5 @@ CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 7c20e9e5800..4e030ac5884 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,6 +36,7 @@ #include <mach/clock.h> #include <mach/common.h> +#include <mach/hardware.h> #include <mach/iomux-mx3.h> #include "devices-imx31.h" diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 091bcf87e1a..a497a299700 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -176,7 +176,9 @@ static struct platform_device *platform_devices[] __initdata = { * setup other stuffs to access the sram. */ static void __init pcm038_init_sram(void) { - mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00); + __raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1))); + __raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1))); + __raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1))); } static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = { diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 9e11359c324..c33ab00845f 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -190,7 +190,10 @@ static struct platform_device qong_nand_device = { static void __init qong_init_nand_mtd(void) { /* init CS */ - mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800); + __raw_writel(0x00004f00, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(3))); + __raw_writel(0x20013b31, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(3))); + __raw_writel(0x00020800, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(3))); + mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true); /* enable pin */ diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c index 99b01e988c8..69e218de536 100644 --- a/arch/arm/mach-mxs/mach-mx23evk.c +++ b/arch/arm/mach-mxs/mach-mx23evk.c @@ -181,6 +181,6 @@ MACHINE_START(MX23EVK, "Freescale MX23 EVK") /* Maintainer: Freescale Semiconductor, Inc. */ .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = mx23evk_init, .timer = &mx23evk_timer, + .init_machine = mx23evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index 8b3aa7afdae..0173c3bce4e 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -419,6 +419,6 @@ MACHINE_START(MX28EVK, "Freescale MX28 EVK") /* Maintainer: Freescale Semiconductor, Inc. */ .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = mx28evk_init, .timer = &mx28evk_timer, + .init_machine = mx28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index 515a423f82c..955593806fd 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -175,6 +175,6 @@ static struct sys_timer tx28_timer = { MACHINE_START(TX28, "Ka-Ro electronics TX28 module") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = tx28_stk5v3_init, .timer = &tx28_timer, + .init_machine = tx28_stk5v3_init, MACHINE_END diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h index 1dc1c522601..6265357284d 100644 --- a/arch/arm/plat-mxc/include/mach/mx27.h +++ b/arch/arm/plat-mxc/include/mach/mx27.h @@ -24,10 +24,6 @@ #ifndef __MACH_MX27_H__ #define __MACH_MX27_H__ -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif - #define MX27_AIPI_BASE_ADDR 0x10000000 #define MX27_AIPI_SIZE SZ_1M #define MX27_DMA_BASE_ADDR (MX27_AIPI_BASE_ADDR + 0x01000) @@ -131,16 +127,6 @@ #define MX27_IO_P2V(x) IMX_IO_P2V(x) #define MX27_IO_ADDRESS(x) IOMEM(MX27_IO_P2V(x)) -#ifndef __ASSEMBLER__ -static inline void mx27_setup_weimcs(size_t cs, - unsigned upper, unsigned lower, unsigned addional) -{ - __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs))); - __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs))); - __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs))); -} -#endif - /* fixed interrupt numbers */ #define MX27_INT_I2C2 1 #define MX27_INT_GPT6 2 diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h index 79e7fc01bb5..e27619e442c 100644 --- a/arch/arm/plat-mxc/include/mach/mx31.h +++ b/arch/arm/plat-mxc/include/mach/mx31.h @@ -1,10 +1,6 @@ #ifndef __MACH_MX31_H__ #define __MACH_MX31_H__ -#ifndef __ASSEMBLER__ -#include <linux/io.h> -#endif - /* * IRAM */ @@ -122,16 +118,6 @@ #define MX31_IO_P2V(x) IMX_IO_P2V(x) #define MX31_IO_ADDRESS(x) IOMEM(MX31_IO_P2V(x)) -#ifndef __ASSEMBLER__ -static inline void mx31_setup_weimcs(size_t cs, - unsigned upper, unsigned lower, unsigned addional) -{ - __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs))); - __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs))); - __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs))); -} -#endif - #define MX31_INT_I2C3 3 #define MX31_INT_I2C2 4 #define MX31_INT_MPEG4_ENCODER 5 diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 14aa213b00d..6632e38f0d1 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -40,6 +40,7 @@ #include <mach/mmc.h> #include <mach/dma.h> +#include <mach/hardware.h> #define DRIVER_NAME "mxc-mmc" |