diff options
-rw-r--r-- | arch/arm/boot/dts/armada-375.dtsi | 53 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-380.dtsi | 6 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-385.dtsi | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/armada-38x.dtsi | 41 |
4 files changed, 55 insertions, 53 deletions
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index c89fee48831..23d497f3f3b 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -12,6 +12,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) @@ -129,7 +130,7 @@ timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; - interrupts = <1 13 0x301>; + interrupts = <GIC_PPI 13 0x301>; clocks = <&coreclk 2>; }; @@ -148,7 +149,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <0>; - interrupts = <0 1 0x4>; + interrupts = <GIC_SPI 1 0x4>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -159,7 +160,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - interrupts = <0 63 0x4>; + interrupts = <GIC_SPI 63 0x4>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -169,7 +170,7 @@ reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 2 0x4>; + interrupts = <GIC_SPI 2 0x4>; timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; @@ -180,7 +181,7 @@ reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 3 0x4>; + interrupts = <GIC_SPI 3 0x4>; timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; @@ -190,7 +191,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; - interrupts = <0 12 4>; + interrupts = <GIC_SPI 12 4>; reg-io-width = <1>; status = "disabled"; }; @@ -199,7 +200,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; - interrupts = <0 13 4>; + interrupts = <GIC_SPI 13 4>; reg-io-width = <1>; status = "disabled"; }; @@ -248,8 +249,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 53 0x4>, <0 54 0x4>, - <0 55 0x4>, <0 56 0x4>; + interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>, + <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>; }; gpio1: gpio@18140 { @@ -260,8 +261,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 58 0x4>, <0 59 0x4>, - <0 60 0x4>, <0 61 0x4>; + interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>, + <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>; }; gpio2: gpio@18180 { @@ -272,7 +273,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 62 0x4>; + interrupts = <GIC_SPI 62 0x4>; }; system-controller@18200 { @@ -299,16 +300,16 @@ #size-cells = <1>; interrupt-controller; msi-controller; - interrupts = <1 15 0x4>; + interrupts = <GIC_PPI 15 0x4>; }; timer@20300 { compatible = "marvell,armada-375-timer", "marvell,armada-370-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; - interrupts-extended = <&gic 0 8 4>, - <&gic 0 9 4>, - <&gic 0 10 4>, - <&gic 0 11 4>, + interrupts-extended = <&gic GIC_SPI 8 4>, + <&gic GIC_SPI 9 4>, + <&gic GIC_SPI 10 4>, + <&gic GIC_SPI 11 4>, <&mpic 5>, <&mpic 6>; clocks = <&coreclk 0>; @@ -322,12 +323,12 @@ status = "okay"; xor00 { - interrupts = <0 22 0x4>; + interrupts = <GIC_SPI 22 0x4>; dmacap,memcpy; dmacap,xor; }; xor01 { - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 0x4>; dmacap,memcpy; dmacap,xor; dmacap,memset; @@ -342,12 +343,12 @@ status = "okay"; xor10 { - interrupts = <0 65 0x4>; + interrupts = <GIC_SPI 65 0x4>; dmacap,memcpy; dmacap,xor; }; xor11 { - interrupts = <0 66 0x4>; + interrupts = <GIC_SPI 66 0x4>; dmacap,memcpy; dmacap,xor; dmacap,memset; @@ -357,7 +358,7 @@ sata@a0000 { compatible = "marvell,orion-sata"; reg = <0xa0000 0x5000>; - interrupts = <0 26 0x4>; + interrupts = <GIC_SPI 26 0x4>; clocks = <&gateclk 14>, <&gateclk 20>; clock-names = "0", "1"; status = "disabled"; @@ -368,7 +369,7 @@ reg = <0xd0000 0x54>; #address-cells = <1>; #size-cells = <1>; - interrupts = <0 84 0x4>; + interrupts = <GIC_SPI 84 0x4>; clocks = <&gateclk 11>; status = "disabled"; }; @@ -376,7 +377,7 @@ mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; - interrupts = <0 25 0x4>; + interrupts = <GIC_SPI 25 0x4>; clocks = <&gateclk 17>; bus-width = <4>; cap-sdio-irq; @@ -429,7 +430,7 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 29 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; @@ -446,7 +447,7 @@ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 33 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>; marvell,pcie-port = <0>; marvell,pcie-lane = <1>; clocks = <&gateclk 6>; diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi index 82b33473a14..678ba3d0c48 100644 --- a/arch/arm/boot/dts/armada-380.dtsi +++ b/arch/arm/boot/dts/armada-380.dtsi @@ -70,7 +70,7 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 29 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; @@ -88,7 +88,7 @@ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 33 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; @@ -106,7 +106,7 @@ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 70 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi index b22f5f1bd33..055bc2f1c05 100644 --- a/arch/arm/boot/dts/armada-385.dtsi +++ b/arch/arm/boot/dts/armada-385.dtsi @@ -81,7 +81,7 @@ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 0x81000000 0 0 0x81000000 0x1 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 29 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; clocks = <&gateclk 8>; @@ -99,7 +99,7 @@ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 33 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>; marvell,pcie-port = <1>; marvell,pcie-lane = <0>; clocks = <&gateclk 5>; @@ -117,7 +117,7 @@ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 0x81000000 0 0 0x81000000 0x3 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 70 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>; marvell,pcie-port = <2>; marvell,pcie-lane = <0>; clocks = <&gateclk 6>; @@ -138,7 +138,7 @@ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 0x81000000 0 0 0x81000000 0x4 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 71 0x4>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>; marvell,pcie-port = <3>; marvell,pcie-lane = <0>; clocks = <&gateclk 7>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 5a10248f4bb..502d21ae7b6 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -13,6 +13,7 @@ */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) @@ -109,7 +110,7 @@ timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; - interrupts = <1 13 0x301>; + interrupts = <GIC_PPI 13 0x301>; clocks = <&coreclk 2>; }; @@ -128,7 +129,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <0>; - interrupts = <0 1 0x4>; + interrupts = <GIC_SPI 1 0x4>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -139,7 +140,7 @@ #address-cells = <1>; #size-cells = <0>; cell-index = <1>; - interrupts = <0 63 0x4>; + interrupts = <GIC_SPI 63 0x4>; clocks = <&coreclk 0>; status = "disabled"; }; @@ -149,7 +150,7 @@ reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 2 0x4>; + interrupts = <GIC_SPI 2 0x4>; timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; @@ -160,7 +161,7 @@ reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; - interrupts = <0 3 0x4>; + interrupts = <GIC_SPI 3 0x4>; timeout-ms = <1000>; clocks = <&coreclk 0>; status = "disabled"; @@ -170,7 +171,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x12000 0x100>; reg-shift = <2>; - interrupts = <0 12 4>; + interrupts = <GIC_SPI 12 4>; reg-io-width = <1>; status = "disabled"; }; @@ -179,7 +180,7 @@ compatible = "snps,dw-apb-uart"; reg = <0x12100 0x100>; reg-shift = <2>; - interrupts = <0 13 4>; + interrupts = <GIC_SPI 13 4>; reg-io-width = <1>; status = "disabled"; }; @@ -197,8 +198,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 53 0x4>, <0 54 0x4>, - <0 55 0x4>, <0 56 0x4>; + interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>, + <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>; }; gpio1: gpio@18140 { @@ -209,8 +210,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 58 0x4>, <0 59 0x4>, - <0 60 0x4>, <0 61 0x4>; + interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>, + <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>; }; system-controller@18200 { @@ -244,17 +245,17 @@ #size-cells = <1>; interrupt-controller; msi-controller; - interrupts = <1 15 0x4>; + interrupts = <GIC_PPI 15 0x4>; }; timer@20300 { compatible = "marvell,armada-380-timer", "marvell,armada-xp-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; - interrupts-extended = <&gic 0 8 4>, - <&gic 0 9 4>, - <&gic 0 10 4>, - <&gic 0 11 4>, + interrupts-extended = <&gic GIC_SPI 8 4>, + <&gic GIC_SPI 9 4>, + <&gic GIC_SPI 10 4>, + <&gic GIC_SPI 11 4>, <&mpic 5>, <&mpic 6>; clocks = <&coreclk 2>, <&refclk>; @@ -285,12 +286,12 @@ status = "okay"; xor00 { - interrupts = <0 22 0x4>; + interrupts = <GIC_SPI 22 0x4>; dmacap,memcpy; dmacap,xor; }; xor01 { - interrupts = <0 23 0x4>; + interrupts = <GIC_SPI 23 0x4>; dmacap,memcpy; dmacap,xor; dmacap,memset; @@ -305,12 +306,12 @@ status = "okay"; xor10 { - interrupts = <0 65 0x4>; + interrupts = <GIC_SPI 65 0x4>; dmacap,memcpy; dmacap,xor; }; xor11 { - interrupts = <0 66 0x4>; + interrupts = <GIC_SPI 66 0x4>; dmacap,memcpy; dmacap,xor; dmacap,memset; |