diff options
| -rw-r--r-- | drivers/pci/pcie/portdrv.h | 6 | ||||
| -rw-r--r-- | drivers/pci/pcie/portdrv_core.c | 206 | ||||
| -rw-r--r-- | include/linux/pcieport_if.h | 12 |
3 files changed, 181 insertions, 43 deletions
diff --git a/drivers/pci/pcie/portdrv.h b/drivers/pci/pcie/portdrv.h index ad4d082a034..5b818bd835e 100644 --- a/drivers/pci/pcie/portdrv.h +++ b/drivers/pci/pcie/portdrv.h @@ -25,6 +25,12 @@ #define PCIE_CAPABILITIES_REG 0x2 #define PCIE_SLOT_CAPABILITIES_REG 0x14 #define PCIE_PORT_DEVICE_MAXSERVICES 4 +#define PCIE_PORT_MSI_VECTOR_MASK 0x1f +/* + * According to the PCI Express Base Specification 2.0, the indices of the MSI-X + * table entires used by port services must not exceed 31 + */ +#define PCIE_PORT_MAX_MSIX_ENTRIES 32 #define get_descriptor_id(type, service) (((type - 4) << 4) | service) diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 843d9e30dd3..3aea92a9292 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -31,6 +31,152 @@ static void release_pcie_device(struct device *dev) } /** + * pcie_port_msix_add_entry - add entry to given array of MSI-X entries + * @entries: Array of MSI-X entries + * @new_entry: Index of the entry to add to the array + * @nr_entries: Number of entries aleady in the array + * + * Return value: Position of the added entry in the array + */ +static int pcie_port_msix_add_entry( + struct msix_entry *entries, int new_entry, int nr_entries) +{ + int j; + + for (j = 0; j < nr_entries; j++) + if (entries[j].entry == new_entry) + return j; + + entries[j].entry = new_entry; + return j; +} + +/** + * pcie_port_enable_msix - try to set up MSI-X as interrupt mode for given port + * @dev: PCI Express port to handle + * @vectors: Array of interrupt vectors to populate + * @mask: Bitmask of port capabilities returned by get_port_device_capability() + * + * Return value: 0 on success, error code on failure + */ +static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask) +{ + struct msix_entry *msix_entries; + int idx[PCIE_PORT_DEVICE_MAXSERVICES]; + int nr_entries, status, pos, i, nvec; + u16 reg16; + u32 reg32; + + nr_entries = pci_msix_table_size(dev); + if (!nr_entries) + return -EINVAL; + if (nr_entries > PCIE_PORT_MAX_MSIX_ENTRIES) + nr_entries = PCIE_PORT_MAX_MSIX_ENTRIES; + + msix_entries = kzalloc(sizeof(*msix_entries) * nr_entries, GFP_KERNEL); + if (!msix_entries) + return -ENOMEM; + + /* + * Allocate as many entries as the port wants, so that we can check + * which of them will be useful. Moreover, if nr_entries is correctly + * equal to the number of entries this port actually uses, we'll happily + * go through without any tricks. + */ + for (i = 0; i < nr_entries; i++) + msix_entries[i].entry = i; + + status = pci_enable_msix(dev, msix_entries, nr_entries); + if (status) + goto Exit; + + for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) + idx[i] = -1; + status = -EIO; + nvec = 0; + + if (mask & (PCIE_PORT_SERVICE_PME | PCIE_PORT_SERVICE_HP)) { + int entry; + + /* + * The code below follows the PCI Express Base Specification 2.0 + * stating in Section 6.1.6 that "PME and Hot-Plug Event + * interrupts (when both are implemented) always share the same + * MSI or MSI-X vector, as indicated by the Interrupt Message + * Number field in the PCI Express Capabilities register", where + * according to Section 7.8.2 of the specification "For MSI-X, + * the value in this field indicates which MSI-X Table entry is + * used to generate the interrupt message." + */ + pos = pci_find_capability(dev, PCI_CAP_ID_EXP); + pci_read_config_word(dev, pos + PCIE_CAPABILITIES_REG, ®16); + entry = (reg16 >> 9) & PCIE_PORT_MSI_VECTOR_MASK; + if (entry >= nr_entries) + goto Error; + + i = pcie_port_msix_add_entry(msix_entries, entry, nvec); + if (i == nvec) + nvec++; + + idx[PCIE_PORT_SERVICE_PME_SHIFT] = i; + idx[PCIE_PORT_SERVICE_HP_SHIFT] = i; + } + + if (mask & PCIE_PORT_SERVICE_AER) { + int entry; + + /* + * The code below follows Section 7.10.10 of the PCI Express + * Base Specification 2.0 stating that bits 31-27 of the Root + * Error Status Register contain a value indicating which of the + * MSI/MSI-X vectors assigned to the port is going to be used + * for AER, where "For MSI-X, the value in this register + * indicates which MSI-X Table entry is used to generate the + * interrupt message." + */ + pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); + pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, ®32); + entry = reg32 >> 27; + if (entry >= nr_entries) + goto Error; + + i = pcie_port_msix_add_entry(msix_entries, entry, nvec); + if (i == nvec) + nvec++; + + idx[PCIE_PORT_SERVICE_AER_SHIFT] = i; + } + + /* + * If nvec is equal to the allocated number of entries, we can just use + * what we have. Otherwise, the port has some extra entries not for the + * services we know and we need to work around that. + */ + if (nvec == nr_entries) { + status = 0; + } else { + /* Drop the temporary MSI-X setup */ + pci_disable_msix(dev); + + /* Now allocate the MSI-X vectors for real */ + status = pci_enable_msix(dev, msix_entries, nvec); + if (status) + goto Exit; + } + + for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) + vectors[i] = idx[i] >= 0 ? msix_entries[idx[i]].vector : -1; + + Exit: + kfree(msix_entries); + return status; + + Error: + pci_disable_msix(dev); + goto Exit; +} + +/** * assign_interrupt_mode - choose interrupt mode for PCI Express port services * (INTx, MSI-X, MSI) and set up vectors * @dev: PCI Express port to handle @@ -42,49 +188,31 @@ static void release_pcie_device(struct device *dev) static int assign_interrupt_mode(struct pci_dev *dev, int *vectors, int mask) { struct pcie_port_data *port_data = pci_get_drvdata(dev); - int i, pos, nvec, status = -EINVAL; - int interrupt_mode = PCIE_PORT_NO_IRQ; - - /* Set INTx as default */ - for (i = 0, nvec = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) { - if (mask & (1 << i)) - nvec++; - vectors[i] = dev->irq; - } - if (dev->pin) - interrupt_mode = PCIE_PORT_INTx_MODE; + int irq, interrupt_mode = PCIE_PORT_NO_IRQ; + int i; /* Check MSI quirk */ if (port_data->port_type == PCIE_RC_PORT && pcie_mch_quirk) - return interrupt_mode; + goto Fallback; + + /* Try to use MSI-X if supported */ + if (!pcie_port_enable_msix(dev, vectors, mask)) + return PCIE_PORT_MSIX_MODE; + + /* We're not going to use MSI-X, so try MSI and fall back to INTx */ + if (!pci_enable_msi(dev)) + interrupt_mode = PCIE_PORT_MSI_MODE; + + Fallback: + if (interrupt_mode == PCIE_PORT_NO_IRQ && dev->pin) + interrupt_mode = PCIE_PORT_INTx_MODE; + + irq = interrupt_mode != PCIE_PORT_NO_IRQ ? dev->irq : -1; + for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) + vectors[i] = irq; + + vectors[PCIE_PORT_SERVICE_VC_SHIFT] = -1; - /* Select MSI-X over MSI if supported */ - pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); - if (pos) { - struct msix_entry msix_entries[PCIE_PORT_DEVICE_MAXSERVICES] = - {{0, 0}, {0, 1}, {0, 2}, {0, 3}}; - status = pci_enable_msix(dev, msix_entries, nvec); - if (!status) { - int j = 0; - - interrupt_mode = PCIE_PORT_MSIX_MODE; - for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) { - if (mask & (1 << i)) - vectors[i] = msix_entries[j++].vector; - } - } - } - if (status) { - pos = pci_find_capability(dev, PCI_CAP_ID_MSI); - if (pos) { - status = pci_enable_msi(dev); - if (!status) { - interrupt_mode = PCIE_PORT_MSI_MODE; - for (i = 0;i < PCIE_PORT_DEVICE_MAXSERVICES;i++) - vectors[i] = dev->irq; - } - } - } return interrupt_mode; } diff --git a/include/linux/pcieport_if.h b/include/linux/pcieport_if.h index a3832079508..5d2afcfa6bc 100644 --- a/include/linux/pcieport_if.h +++ b/include/linux/pcieport_if.h @@ -16,10 +16,14 @@ #define PCIE_ANY_PORT 7 /* Service Type */ -#define PCIE_PORT_SERVICE_PME 1 /* Power Management Event */ -#define PCIE_PORT_SERVICE_AER 2 /* Advanced Error Reporting */ -#define PCIE_PORT_SERVICE_HP 4 /* Native Hotplug */ -#define PCIE_PORT_SERVICE_VC 8 /* Virtual Channel */ +#define PCIE_PORT_SERVICE_PME_SHIFT 0 /* Power Management Event */ +#define PCIE_PORT_SERVICE_PME (1 << PCIE_PORT_SERVICE_PME_SHIFT) +#define PCIE_PORT_SERVICE_AER_SHIFT 1 /* Advanced Error Reporting */ +#define PCIE_PORT_SERVICE_AER (1 << PCIE_PORT_SERVICE_AER_SHIFT) +#define PCIE_PORT_SERVICE_HP_SHIFT 2 /* Native Hotplug */ +#define PCIE_PORT_SERVICE_HP (1 << PCIE_PORT_SERVICE_HP_SHIFT) +#define PCIE_PORT_SERVICE_VC_SHIFT 3 /* Virtual Channel */ +#define PCIE_PORT_SERVICE_VC (1 << PCIE_PORT_SERVICE_VC_SHIFT) /* Root/Upstream/Downstream Port's Interrupt Mode */ #define PCIE_PORT_NO_IRQ (-1) |