diff options
| -rw-r--r-- | arch/sh/boards/renesas/ap325rxa/setup.c | 81 |
1 files changed, 80 insertions, 1 deletions
diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index 333b15cd795..db4e37d9c5b 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -16,7 +16,10 @@ #include <linux/mtd/physmap.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/sh_mobile_lcdc.h> #include <asm/io.h> +#include <asm/clock.h> static struct resource smc9118_resources[] = { [0] = { @@ -79,9 +82,77 @@ static struct platform_device ap325rxa_nor_flash_device = { }, }; +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_HIZCRA 0xA4050158 +#define PORT_PSCR 0xA405011E +#define PORT_PSDR 0xA405013E + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + static struct platform_device *ap325rxa_devices[] __initdata = { &smc9118_device, - &ap325rxa_nor_flash_device + &ap325rxa_nor_flash_device, + &lcdc_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -89,6 +160,8 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { static int __init ap325rxa_devices_setup(void) { + clk_always_enable("mstp200"); /* LCDC */ + i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); @@ -99,6 +172,12 @@ device_initcall(ap325rxa_devices_setup); static void __init ap325rxa_setup(char **cmdline_p) { + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); } static struct sh_machine_vector mv_ap325rxa __initmv = { |